[Federal Register Volume 80, Number 79 (Friday, April 24, 2015)]
[Proposed Rules]
[Page 22939]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-09566]
[[Page 22939]]
-----------------------------------------------------------------------
DEPARTMENT OF ENERGY
10 CFR Parts 429 and 431
[Docket No. EERE-2013-BT-TP-0055]
RIN 1905-AD50
Energy Conservation Program: Test Procedure for Pumps; Correction
AGENCY: Office of Energy Efficiency and Renewable Energy, Department of
Energy.
ACTION: Notice of proposed rulemaking and public meeting; correction.
-----------------------------------------------------------------------
SUMMARY: On April 1, 2015, the U.S. Department of Energy (DOE)
published in the Federal Register a notice of proposed rulemaking and
public meeting for Energy Conservation Program: Test Procedure for
Pumps. This document corrects terms in four equations.
DATES: April 24, 2015.
FOR FURTHER INFORMATION CONTACT: Ashley Armstrong, U.S. Department of
Energy, Office of Energy Efficiency and Renewable Energy, Building
Technologies Office, EE-5B, 1000 Independence Avenue SW., Washington,
DC 20585-0121. Telephone: (202) 586-6590. Email:
[email protected].
Corrections
In the Federal Register published on April 1, 2015, in FR Doc.
2015-06945, make the following corrections:
1. On page 17604: Equation (6) is corrected by removing ``13.46''
and adding in its place ``17.80''. The corrected equation reads as
follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.017
Appendix A to Subpart Y of Part 431--Uniform Test Method for the
Measurement of Energy Consumption of Pumps. [Corrected]
2. On page 17645: The equation in section II.B.1.1.1 is corrected
by removing ``13.46'' and adding in its place ``17.80''. The corrected
equation reads as follows:
[eta]pump,STD = -0.85 *
In(Q100[percnt])2 - 0.38 * In(NS) *
In(Q100[percnt]) - 11.48 * In(NS)2 +
17.80 * In(Q100[percnt]) + 179.80 * In(NS) - (C -
555.6)
3. On page 17646: The equation in section III.D.1.2.1 is corrected
by removing ``MotorH'' and adding in its place ``MotorHP''. The
corrected equation reads as follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.001
4. On page 17648: The equation in section V.D.1.2.1 is corrected by
removing ``MotorHPMotorH'' and adding in its place ``MotorHP''. The
corrected equation reads as follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.002
Issued in Washington, DC, on April 20, 2015.
Kathleen B. Hogan,
Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and
Renewable Energy.
[FR Doc. 2015-09566 Filed 4-23-15; 8:45 am]
BILLING CODE 6450-01-P