[Federal Register Volume 80, Number 110 (Tuesday, June 9, 2015)]
[Proposed Rules]
[Pages 32493-32508]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-13719]
[[Page 32493]]
-----------------------------------------------------------------------
DEPARTMENT OF AGRICULTURE
Agricultural Marketing Service
7 CFR Part 1211
[Document Number AMS-FV-11-0074; PR-A2]
RIN 0581-AD24
Hardwood Lumber and Hardwood Plywood Promotion, Research and
Information Order
AGENCY: Agricultural Marketing Service, USDA.
ACTION: Proposed rule; supplemental notice of proposed rulemaking.
-----------------------------------------------------------------------
SUMMARY: The U.S. Department of Agriculture (USDA) is proposing to
amend the 2013 proposed rule for a Hardwood Lumber and Hardwood Plywood
Promotion, Research and Information Order (Order). In that 2013
proposed rule, USDA requested comments on a proposed industry-funded,
national research and promotion program for hardwood lumber and
hardwood plywood that would be administered by a board of industry
members selected by the Secretary of Agriculture (Secretary). USDA is
reopening the comment period only with respect to specific issues
identified in this proposed rule. USDA is taking this action in
response to the extensive comments received in response to that 2013
proposed rule.
DATES: Comments must be received by July 9, 2015. Pursuant to the
Paperwork Reduction Act (PRA), comments on information collection
issues must be received by August 10, 2015.
ADDRESSES: Interested persons are invited to submit written comments
concerning this supplemental proposal. Comments may be submitted on the
Internet at: http://www.regulations.gov or to the Promotion and
Economics Division, Fruit and Vegetable Program, AMS, USDA, 1400
Independence Avenue SW., Room 1406-S, Stop 0244, Washington, DC 20250-
0244; facsimile: (202) 205-2800. All comments should reference the
document number and the date and page number of this issue of the
Federal Register and will be made available for public inspection,
including name and address, if provided, in the above office during
regular business hours or it can be viewed at http://www.regulations.gov.
Pursuant to the PRA, comments concerning the information collection
should also be sent to the Desk Office for Agriculture, Office of
Information and Regulatory Affairs, OMB, New Executive Office Building,
725 17th Street NW., Room 725, Washington, DC 20503.
FOR FURTHER INFORMATION CONTACT: Patricia A. Petrella, Marketing
Specialist, Promotion and Economics Division, Fruit and Vegetable
Program, AMS, USDA, 1400 Independence Avenue SW., Room 1406, Stop 0244,
Washington, DC 20250-0244; telephone: (301) 334-2891; facsimile (301)
334-2896; or electronic mail: [email protected].
SUPPLEMENTARY INFORMATION: This proposal is issued pursuant to the
Commodity Promotion, Research and Information Act of 1996 (1996 Act) (7
U.S.C. 7411-7425).
As part of this rulemaking process, a proposed rule was published
in the Federal Register on November 13, 2013 (78 FR 68298), on
establishing an industry-funded promotion, research and information
program for hardwood lumber and hardwood plywood. That proposal
provided for a 60-day comment period which ended on January 13, 2014.
On January 16, 2014, a notice was published in the Federal Register
that reopened and extended the comment period until February 18, 2014
(79 FR 2805). A total of 939 comments were received during both comment
periods.
Executive Order 12866 and Executive Order 13563
Executive Orders 12866 and 13563 direct agencies to assess all
costs and benefits of available regulatory alternatives and, if
regulation is necessary, to select regulatory approaches that maximize
net benefits (including potential economic, environmental, public
health and safety effects, distributive impacts, and equity). Executive
Order 13563 emphasizes the importance of quantifying both costs and
benefits, of reducing costs, of harmonizing rules, and of promoting
flexibility. This rule has been designated as ``non-significant
regulatory action'' under section 3(f) of Executive Order 12866.
Accordingly, the Office of Management and Budget (OMB) has waived the
review process.
Executive Order 13175
This action has been reviewed in accordance with the requirements
of Executive Order 13175, Consultation and Coordination with Indian
Tribal Governments. The review reveals that this regulation would not
have substantial and direct effects on Tribal governments and would not
have significant Tribal implications.
Executive Order 12988
This proposal has been reviewed under Executive Order 12988, Civil
Justice Reform. It is not intended to have retroactive effect. Section
524 of the 1996 Act (7 U.S.C. 7423) provides that it shall not affect
or preempt any other Federal or State law authorizing promotion or
research relating to an agricultural commodity.
Under section 519 of the 1996 Act (7 U.S.C. 7418), a person subject
to an order may file a written petition with USDA stating that an
order, any provision of an order, or any obligation imposed in
connection with an order, is not established in accordance with the
law, and request a modification of an order or an exemption from an
order. Any petition filed challenging an order, any provision of an
order, or any obligation imposed in connection with an order, shall be
filed within two years after the effective date of an order, provision,
or obligation subject to challenge in the petition. The petitioner will
have the opportunity for a hearing on the petition. Thereafter, USDA
will issue a ruling on the petition. The 1996 Act provides that the
district court of the United States for any district in which the
petitioner resides or conducts business shall have the jurisdiction to
review a final ruling on the petition, if the petitioner files a
complaint for that purpose not later than 20 days after the date of the
entry of USDA's final ruling.
Background
In June 2011, USDA received a proposal for a national research and
promotion program for hardwood lumber and hardwood plywood from the
Blue Ribbon Committee (BRC). The BRC is a committee of 14 hardwood
lumber and hardwood plywood industry leaders representing small and
large manufacturers geographically distributed throughout the United
States.
The BRC proposed a program that would be financed by an assessment
on hardwood lumber and hardwood plywood manufacturers and administered
by a board of industry members selected by the Secretary. The purpose
of the program would be to strengthen the position of hardwood lumber
and hardwood plywood in the marketplace and maintain and expand markets
for hardwood lumber and hardwood plywood. A referendum would be held
among eligible hardwood lumber and hardwood plywood manufacturers to
determine whether they favor implementation of the program prior to it
going into effect.
[[Page 32494]]
As previously stated, a proposed rule regarding this action that
was published in the Federal Register on November 13, 2013, provided
for a 60-day comment period ending January 13, 2014. The comment period
was reopened and extended an additional 30 days, or through February
18, 2014. A total of 939 comments were received during both comment
periods. Many of the comments included substantive questions about
fundamental provisions of the program as proposed. Some of these
questions included what products would be covered, how products would
be assessed, how the exemption for small manufacturers would be
administered, and how the referendum would be conducted. Some of the
comments provided recommendations in these different areas. Several
comments also expressed concern with the overall cost of the program on
manufacturers.
As a result, USDA is reopening the comment period to solicit
additional comments on specific areas in the November 2013 proposal.
USDA is proposing alternative language that would modify several
previously proposed provisions (including adding two proposed
definitions), taking into account the comments received. USDA is also
asking specific questions regarding other aspects of the proposed
program. This is intended to assist USDA in its further consideration
of the proposal for a program. The specific areas open for comment are
detailed in the section titled Scope of Supplemental Notice of Proposed
Rulemaking.
Clarification Regarding Exports and Imports
In this document, USDA is clarifying that exports would be covered
under the program. The background section of the November 2013 proposed
rule (78 FR 68298) inadvertently stated that exports would be exempted
from the proposed program. USDA is also reiterating that imports would
not be covered under the program. Several commenters raised this
question during the comment period in response to the November 2013
proposed rule.
In this document, USDA is also informing stakeholders of a
supplemental notice of proposed rulemaking published elsewhere in this
issue of the Federal Register to amend a separate proposed rule also
published in November 2013 concerning referenda procedures related to
the proposed hardwood program (November 13, 2013; 78 FR 67979).
Scope of Supplemental Notice of Proposed Rulemaking
Proposed Modifications to Previously Proposed Provisions
USDA is proposing to revise several provisions of the previously
proposed Order (including adding two definitions) taking into account
the comments received in response to the November 2013 proposed rule.
USDA requests comments on the proposed revisions which are described in
the following paragraphs.
Definitions
Green Air Dried (G/AD)
USDA is proposing to add a term to Sec. 1211.11 to the Order
detailed in the November 2013 proposed rule to define the term ``green
air dried (G/AD)'' to mean green hardwood lumber or hardwood lumber
that has been dried by exposure to air in a yard or shed, without
artificial heat. This term is needed to address concerns raised by
commenters regarding how green air dried lumber would be handled under
the proposed program.
Green (G) Hardwood Lumber
USDA is proposing to modify the term ``green (G) hardwood lumber''
as defined in the November 2013 proposed rule in proposed Sec. 1211.11
to clarify that green (G) hardwood lumber does not include kiln dried
or air dried lumber. This modification is needed to address concerns
raised by commenters regarding how air dried lumber would be handled
under the proposed program. Thus, the term ``green (G) hardwood
lumber'' would mean hardwood lumber that has not been kiln dried or air
dried.
Hardwood Lumber
USDA is proposing to modify the term ``hardwood lumber'' as defined
in the November 2013 proposed rule in proposed section 1211.12 to
clarify that it includes yellow poplar in the list of trees referenced,
and that the respective trees must be grown in the United States. This
modification is proposed in response to comments received requesting
that the term be clarified. Thus, the term hardwood lumber would mean
timber from the wood of a cypress tree or a deciduous, broad leafed
tree (including but not limited to aspen, birch, cypress, poplar,
yellow poplar, maple, cherry, walnut and oak) grown in the United
States that has been sawn into boards or blocks by a sawmill in the
United States.
Hardwood Lumber Manufacturer
USDA is proposing to modify the term ``hardwood lumber
manufacturer'' as defined in the November 2013 proposed rule in
proposed section 1211.13 to include not only entities that kiln dry but
also entities that air dry green hardwood lumber. This modification is
needed to address concerns raised by commenters regarding how air dried
lumber would be handled under the proposed program. Thus, the term
hardwood lumber manufacturer would mean a person who cuts raw, green
hardwood logs into hardwood lumber or hardwood lumber products or a
person who kiln dries or air dries green hardwood lumber to create
hardwood lumber, hardwood lumber products or hardwood lumber value-
added products.
Hardwood Lumber Products
USDA is proposing to modify the term ``hardwood lumber products''
as defined in the November 2013 proposed rule in proposed Sec. 1211.14
to link the definition to a grade standard defined in the National
Hardwood Lumber Association Rules for the Inspection of Hardwood &
Cypress. This definition would also be modified to exclude industrial
products. This modification is being proposed in response to comments
received requesting that industrial products be excluded from the
proposed program and that the term be linked to a grade standard.
Thus, the term hardwood lumber products would mean hardwood G/AD/KD
lumber that has been transformed into products that remain boards
meeting or exceeding the level of ``Grade 3A Common'' as defined by
National Hardwood Lumber Association Rules for the Inspection of
Hardwood & Cypress effective January 1, 2015 (http://nhla.com/rulesbook), or equivalent standard, as recommended by the Board and
approved by the Secretary. The Grade 3A Common standard would provide
minimum requirements for covered hardwood in terms of width, length and
other factors. This third party standard would be incorporated by
reference, which would specify the current version of the cited third-
party standard and would include information on the availability of
this standard to meet requirements for incorporation by reference. For
purposes of this Order, hardwood lumber would not include industrial
products which remain in board or block form such as ties, cants, crane
mat material and pallet stock or products which are transformed from
boards or blocks of lumber into other products
[[Page 32495]]
such as furniture, tight cooperage, cabinetry, and constructed pallets.
Hardwood Lumber Value-Added Product Manufacturer
USDA is proposing to modify the term ``hardwood lumber value-added
product manufacturer'' as defined in the November 2013 proposed rule in
proposed Sec. 1211.15 to include not only entities that kiln dry but
also entities that air dry green hardwood lumber. This modification is
needed to address questions raised by commenters regarding how air
dried lumber would be handled under the proposed program.
Thus, the term hardwood lumber value-added product manufacturer
would mean a person who operates a sawmill to manufacture hardwood
lumber value-added products (the hardwood lumber may be air dried or
kiln dried), or a person who operates a kiln to dry hardwood lumber
that is then used to manufacture hardwood lumber value-added products.
Hardwood Lumber Value-Added Products
USDA is proposing to modify the term ``hardwood lumber value-added
products'' as defined in the November 2013 proposed rule in proposed
Sec. 1211.16 to exclude industrial products. This modification is
being proposed in response to comments received requesting that
industrial products be excluded from the proposed program.
Thus, the term hardwood lumber value-added products would mean
products which remain in the general shape of hardwood lumber boards,
but have undergone additional processing beyond surfacing or cutting to
a particular size. Hardwood lumber value-added products would include
products such as solid wood unfinished strip flooring, all-sides
surfaced boards, finger-jointed strips ripped to width, and moldings.
For purposes of this Order, hardwood lumber value-added products would
not include industrial products which remain in board or block form
such as ties, cants, crane mat material, and pallet stock or products
which are transformed from boards or blocks of lumber into other
products, such as furniture, tight cooperage, cabinetry, and
constructed pallets. Further, it would not include multi-component or
further manufactured products such as furniture, cabinets, cabinet
doors, prefinished or engineered flooring, pallets, or dimension or
glued components for cabinets or furniture.
Manufacturer
USDA is proposing to modify the term ``manufacturer'' as defined in
the November 2013 proposed rule in proposed Sec. 1211.22 to mean any
person who is engaged in the business of manufacturing covered hardwood
lumber in the United States as defined in this Order. The definition as
proposed in the 2013 proposed rule included the term ``domestic'' which
appeared to cause some confusion regarding whether imports were covered
under the proposed program. USDA is proposing to revise the definition
for the purpose of clarity.
Sale
USDA is proposing to modify the term ``sale'' as defined in the
November 2013 proposed rule in proposed section 1211.31 to address
questions posed regarding whether the proposed program was assessing
the commodity at the appropriate point in production. The definition as
proposed in the November 2013 proposed rule linked a sale to the dollar
value of covered hardwood purchased rather than the dollar value of
covered hardwood sold. USDA is proposing to modify this definition
based on comments received.
Thus, the term sale for purposes of calculating assessments, would
mean the total dollar value of hardwood lumber, hardwood lumber
products, hardwood lumber value-added products, or hardwood plywood
that are sold from a hardwood lumber manufacturer or hardwood plywood
manufacturer. Sales, for purposes of the assessment, would not include
freight or discounts, and brokered sales would not be included within
the meaning of the sale.
Hardwood Lumber and Hardwood Plywood Promotion, Research and
Information Board
Nominations and Appointments
USDA is proposing to modify the initial nomination procedures for
the first Board as specified in the November 2013 proposed rule in
proposed paragraph (a) of Sec. 1211.42. The November 2013 proposed
rule provides that the BRC solicit potential nominees and submit the
nominations to the Secretary. Some commenters noted the importance of
trying to ensure that the nomination process is highly publicized so
that interested persons are aware of the process. In response, USDA is
proposing to modify this section to require the BRC and USDA to work
together to publicize the nomination process so that eligible
candidates are aware of the opportunity to serve on the Board.
Assessments
USDA is proposing to modify portions of the assessment provisions
as specified in the November 2013 proposed rule. Specifically,
paragraph (a) of Sec. 1211.52 regarding assessments would be revised
to clarify that assessments would be applicable to hardwood plywood and
hardwood lumber, both in its green (rough) form and as it is kiln dried
or air dried to create hardwood lumber products and hardwood lumber
value-added products. The reference to air dried was omitted in the
November 2013 proposed rule. This modification is needed to address
questions raised by commenters regarding how air dried lumber would be
handled under the proposed program.
USDA is also proposing to modify paragraph (b) of Sec. 1211.52 as
specified in the November 2013 proposed rule in an effort to clarify
how covered hardwood would be assessed under the program. USDA received
many comments during the comment period with regard to the assessment
section. Many commenters opined that the calculations were complicated
and may not be workable.
USDA is proposing to simplify the table used as an illustration in
Sec. 1211.52(b) by omitting references to descriptions of products and
using instead the terms defined in the proposed program. The table
would read as follows:
------------------------------------------------------------------------
Allowable deductions
Covered hardwood Assessment rate \1\
------------------------------------------------------------------------
Hardwood lumber............. $1/$1,000 in sales.. N/A.
Hardwood lumber products.... $1/$1,000 in sales.. --dollar value of
green hardwood
lumber purchases.
[[Page 32496]]
Hardwood lumber value-added $0.75/$1,000 in --dollar value of
products. sales of value- green hardwood
added products plus lumber purchases.
$1.00 per $1,000 in
sales of green (G/
AD/KD) hardwood
lumber.
Hardwood plywood............ $3/$1,000 in sales.. N/A.
------------------------------------------------------------------------
\1\ The deductions are necessary to take into account assessments
already paid on green (G/AD/KD) hardwood lumber purchased by the
manufacturer to make the product or value-added product.
The table would also be revised to clarify that the assessment rate
for hardwood lumber value-added products includes $0.75 per $1,000 in
sales of value added products, plus $1.00 per $1,000 in sales of green
(G/AD/KD) hardwood lumber, minus the dollar value of the green (G/AD/
KD) hardwood lumber purchases used to make the products.
USDA is also proposing to clarify the remainder of Sec. 1211.52(b)
that explains in narrative form how the assessments are computed
depending on the type of covered hardwood. The proposed paragraphs
would read as follows:
(1) Hardwood lumber manufacturers that cut raw, green hardwood logs
into hardwood lumber or kiln dry or air dry hardwood lumber that can be
further processed into products would pay at the rate of $1.00 per
$1,000 in sales of green (G/AD/KD) hardwood lumber;
(2) Hardwood lumber manufacturers that manufacture hardwood lumber
products would pay at a rate of $1.00 per $1,000 in sales of hardwood
lumber products minus the dollar value of green (G/AD/KD) hardwood
lumber purchases;
(3) Hardwood lumber value-added product manufacturers would pay a
rate of $0.75 per $1,000 in sales of hardwood lumber value-added
products, plus $1.00 per $1,000 in sales of green (G/AD/KD) hardwood
lumber, minus the dollar value of the green hardwood lumber purchases
(G/AD/KD); and
(4) Hardwood plywood manufacturers would pay at the rate of $3.00
per $1,000 in sales of hardwood plywood lumber.
(5) Brokered sales of hardwood lumber or hardwood lumber products
would be excluded from the calculation of assessments.
(6) Vertically integrated manufacturers that manufacture hardwood
lumber, then transfer the lumber from one business unit to another
within the same company to manufacture non-assessed product, would pay
assessments based on the fair market value of the non-assessed product,
minus the fair market value of the green (G/AD/KD) hardwood lumber,
minus the fair market value of the green (G/AD/KD) hardwood lumber
purchases times $0.001. This formula is necessary to ensure that
covered hardwood lumber in a vertically integrated company is
appropriately assessed.
Exemptions From Assessment
USDA is proposing to modify Sec. 1211.53 of the November 2013
proposed rule pertaining to exemptions from assessment. Paragraph (b)
of that section requires manufacturers who meet the exemption threshold
to apply to the Board for an exemption certificate every year.
Commenters raised concerns with the burden of this on small companies.
Thus, USDA is proposing to revise this paragraph so that the exemption
certificates issued by the Board remain valid for as long as the annual
sales of the respective manufacturers remain below the exemption
threshold. Paragraph (b) in Sec. 1211.53 is proposed to be modified
accordingly. It should be noted that even with this modification to
Sec. 1211.53, exempt manufacturers would still be required to keep
records pursuant to Sec. 1211.71.
Organic Exemption From Assessment
Section 1211.53(e) as proposed in the November 2013 proposed rule
stated that to be eligible for an organic exemption, a hardwood lumber
or hardwood plywood manufacturer who operated under a National Organic
Program (NOP) (7 CFR part 205) system plan, could only manufacture and
have annual sales of covered hardwood lumber eligible to be labeled as
100 percent organic under the NOP and could not be a split operation.
This limitation was based on legislative authority in section 501
of the Federal Agriculture Improvement and Reform Act of 1996 (FAIR
Act) (7 U.S.C. 7401), which established certain provisions for generic
commodity promotion programs created under the various commodity
promotion laws. Section 501 of the FAIR Act was previously amended in
May 2002, by section 10607 of the Farm Security and Rural Investment
Act (2002 Farm Bill) (Pub. L. 107-171) to exempt persons that produced
and marketed solely 100 percent organic products, and who did not
otherwise produce or market any conventional or nonorganic products,
from the payment of an assessment for commodity promotion activities
under a commodity promotion law.
However, section 10004 of the Agricultural Act of 2014 (2014 Farm
Bill) (Pub. L. 113-79) subsequently expanded the organic assessment
exemption to apply to any agricultural commodity that is certified as
``organic'' or ``100 percent organic'' as defined by NOP regardless of
whether the person requesting the exemption also produces, handles,
markets, or imports conventional or nonorganic products.
USDA is proposing to modify Sec. 1211.53(e) so that it is
consistent with the FAIR Act as amended by the 2014 Farm Bill. The
exemption would then allow manufacturers of ``organic'' and ``100
percent organic'' hardwood lumber certified under NOP, regardless of
whether the person requesting the exemption also produces, handles,
markets, or imports conventional or nonorganic products, to be eligible
for an exemption from assessments.
Miscellaneous
Referenda
USDA is proposing to modify the referenda criteria as specified in
the November 2013 proposed rule in paragraphs (a) and (b) of proposed
Sec. 1211.81 to require approval by a majority of manufacturers voting
in the referendum who also represent a majority of the volume (board
foot or equivalent) of covered hardwood, represented in the referendum
and by those who, during a representative period determined by the
Secretary, were engaged in the manufacturing of covered hardwood. Only
manufacturers who would pay or paid assessments under the program
(those with annual sales over the respective exemption threshold) would
be eligible to vote in referenda.
USDA is proposing this modification in response to the many
comments received regarding the criteria proposed in the November 2013
proposed rule. That rule proposed approval by a majority of the volume
of covered
[[Page 32497]]
hardwood represented in the referendum. Several commenters expressed
concern that this voting criteria favored large manufacturers and
disadvantaged small companies.
Suspension and Termination
USDA is also proposing to modify the paragraph (b) of Sec. 1211.82
as specified in the November 2013 proposed rule regarding suspension
and termination to mirror the proposed change to Sec. 1211.81
regarding referenda. Section 1211.82(b) as proposed in the November
2013 proposed rule would require the Secretary to suspend or terminate
the proposed program at the end of a fiscal period based on a majority
of the volume (board foot equivalent) of covered hardwood represented
in a referendum by those who, during a representative period determined
by the Secretary, were engaged in the manufacturing of covered
hardwood.
USDA is proposing to revise Sec. 1211.82(b) to require the
Secretary to suspend or terminate the program if suspension or
termination is favored by a majority of manufacturers voting in a
referendum who represent a majority of the volume (board foot or
equivalent) represented in the referendum, and who, during a
representative period determined by the Secretary, were engaged in the
manufacturing of covered hardwood. As explained in the section above
titled Referenda, USDA is proposing this change in response to several
comments received regarding the referenda criteria.
Questions Regarding Other Aspects of the Proposed Program
USDA received numerous comments in response to the November 2013
proposed rule that raised other substantive issues with regard to the
proposed program. To address these issues, USDA is posing the following
questions for comment. Responses should cite the number and subsection
of the question being answered. USDA requests that commenters provide
specific data, statistics, or any other evidence as appropriate upon
which those comments are based.
1. Hardwood Plywood
Several comments questioned the inclusion of hardwood plywood in
the proposed program. Commenters opined that hardwood plywood competes
with hardwood lumber, and that plywood is too different to include in
the program. As USDA continues to evaluate the merits of including
hardwood plywood in the proposed program, USDA seeks comments on the
following questions:
a. What are the benefits and the drawbacks for including hardwood
lumber and hardwood plywood together in the same research and promotion
program?
b. How would the proposed program benefit the hardwood plywood
sector of the industry?
c. What types of promotion programs could be envisioned by the
industry for hardwood plywood and how would this impact the hardwood
lumber sector of the industry?
d. What impact would excluding hardwood plywood have on the
expected amount of assessments to be collected under the proposed
program?
e. What impact would excluding hardwood plywood have on the
proposed Board structure?
2. Assessments
As previously mentioned, several comments were received regarding
the proposed assessment section. USDA has clarified the section in this
supplemental proposed rule, but also seeks comments on the following
questions:
a. Should the assessment computation be revised? If so, how should
it be revised and what would be the impact on the projected amount of
assessments to be collected under the proposed program?
b. Should the proposed rates of assessment on any of the four types
of covered hardwood be revised? If so, to what level and what would be
the impact on the projected amount of assessments to be collected under
the proposed program?
Proposed Editorial Changes
The proposed regulatory text contained in this document includes
other changes to make the proposed program's provisions more clear and
improve readability. The editorial changes are summarized in Table 1
below.
Table 1--Proposed Editorial Changes
------------------------------------------------------------------------
Description in revised
regulatory text Proposed revision Explanation
(proposed section)
------------------------------------------------------------------------
1211.9.................. Add the words Clarify that the Board
``recommended by the would recommend a
Board'' after the source to the
word ``source''. Secretary for fair
market value.
1211.10................. Add the word Clarify that the terms
``fiscal'' before the ``fiscal period'' and
word ``year''. ``fiscal year'' have
the same meaning.
1211.20................. Add the abbreviation Clarify that KD, a
``KD'' to the term common abbreviation
kiln dried. used in the industry,
means kiln dried.
1211.41(e)(1) and (2)... Substitute the term Clarify that when the
``manufactured'' for Board reviews data
the term ``produced'' every 5-years to
and omit the phrase assess whether
``within the United changes are necessary
States''. to the Board's
structure to ensure
it continues to
reflect the
geographic
distribution of
covered hardwood, the
Board's review is on
covered hardwood
manufactured, and
that the review is
not limited to sales
within the United
States.
1211.42(a) and (b)(1)... Change the phrase Clarify the
``nominees must have eligibility
annual sales of more requirements for
than $2 million of Board membership.
covered hardwood
lumber or have annual
sales of more than
$10 million of
hardwood plywood per
fiscal year'' to
``nominees must have
annual sales of $2
million or more of
hardwood lumber,
hardwood products,
and hardwood value-
added products, or
have annual sales of
$10 million or more
of hardwood plywood
per fiscal year''.
[[Page 32498]]
1211.53(d).............. Change the phrase Clarify the exemption
``Hardwood lumber thresholds under the
manufacturers who proposed program.
received an exemption
certificate from the
Board but have annual
sales of more than $2
million or hardwood
plywood manufacturers
that have annual
sales of more than
$10 million during
the fiscal year'' to
``Hardwood lumber
manufacturers who
received an exemption
certificate from the
Board but have annual
sales of $2 million
or more or hardwood
plywood manufacturers
that have annual
sales of $10 million
or more during the
fiscal year''.
1211.81(b).............. Change the penultimate Clarify when the
sentence from ``The Secretary must
Secretary will also conduct a referendum
conduct a referendum under the proposed
if requested by the program.
Board or by 10
percent or more of
all non-exempt
manufacturers paying
an assessment'' to
``The Secretary will
also conduct a
referendum if
requested by the
Board or if requested
by 10 percent or more
of all manufacturers
eligible to vote in a
referendum''.
------------------------------------------------------------------------
Regulatory Flexibility Act Analysis
In accordance with the Regulatory Flexibility Act (RFA) (5 U.S.C.
601-612), AMS is required to examine the impact of the proposed rule on
small entities. Accordingly, AMS has considered the economic impact of
this action on such entities.\1\
---------------------------------------------------------------------------
\1\ The complete Regulatory Flexibility Act Analysis appears in
the proposed rule at 78 FR 68307 (Nov. 13, 2013).
---------------------------------------------------------------------------
The purpose of the RFA is to fit regulatory actions to the scale of
businesses subject to such actions so that small businesses will not be
disproportionately burdened. The Small Business Administration defines,
in 13 CFR part 121, small agricultural producers as those having annual
receipts of no more than $750,000 and small agricultural service firms
(manufacturers) as those having annual receipts of no more than $7.0
million. According to information submitted by the proponents, it is
estimated that there are 2,804 hardwood lumber manufacturers and 36
hardwood plywood manufacturers in the United States. This number
represents separate business entities and includes exempted and
assessed entities under the Order; one business entity may include
multiple sawmills. It is estimated that 85 to 90 percent of the
manufacturers are small businesses.
In this document, USDA is proposing to amend the November 2013
proposed rule for a national research and promotion program for
hardwood lumber and hardwood plywood. In that 2013 proposed rule, USDA
requested comments on a proposed industry-funded Order for hardwood
lumber and hardwood plywood that would be administered by a board of
industry members selected by the Secretary. USDA is reopening the
comment period only with respect to specific issues identified in this
proposed rule. USDA is taking this action in response to the extensive
comments received in response to that November 2013 proposed rule. The
proposed program is authorized under the 1996 Act.
Regarding the economic impact of the changes proposed in this
supplemental notice, most of the changes are for the purpose of
clarification and would have no economic impact on affected entities.
These changes include the following: Adding a new term to Sec. 1211.11
to define the term green air dried; clarifying the following terms--
green (G) hardwood lumber (Sec. 1211.11), hardwood lumber (Sec.
1211.12), hardwood lumber manufacturer (Sec. 1211.13), hardwood lumber
products, including an incorporation by reference (Sec. 1211.14),
hardwood lumber value-added product manufacturer (Sec. 1211.15),
manufacturer (Sec. 1211.22), and sale (Sec. 1211.31); modifying the
initial nomination process to help ensure the process is appropriately
publicized (Sec. 1211.42); clarifying the assessment section (Sec.
1211.52); modifying the organic exemption so that it is consistent with
the FAIR Act as amended by the 2014 Farm Bill (Sec. 1211.53(e)), and
making the proposed editorial changes as previously specified in Table
1 of this document. The proposed change to the referenda criteria in
Sec. 1211.81 to require approval by a majority of those voting and by
a majority of the volume represented in a referendum would also have no
economic impact on affected entities.
Proposed changes to three of the sections detailed in this
supplemental notice would have some economic impact on the proposed
program. Excluding industrial products from the terms hardwood lumber
products in Sec. 1211.14 and hardwood lumber value-added product
manufacturer in Sec. 1211.15 would likely reduce the amount of
assessments collected under the program. We do not have information
regarding to what extent assessments would be reduced or whether the
number of entities covered under the proposed program would be reduced.
Comments providing any information of the impact of this change on the
amount of assessments anticipated under the proposed program or the
number of entities expected to be covered under the program are
requested.
The third proposed change that would have an economic impact on the
proposed program concerns Sec. 1211.53(b) regarding requirements for
small manufacturers. USDA received many comments during the comment
period regarding potential effects on small companies. Several
commenters expressed concern that the proposed program would increase
their costs and that the program would be burdensome to their
businesses.
In response to these comments, USDA is proposing to reduce the
information collection requirements on small manufacturers. As
previously mentioned in this document, Sec. 1211.53(b) of the November
2013 proposed rule would require small manufacturers who meet the
exemption threshold to apply to the Board annually for an exemption
certificate. Commenters argued that this would be very burdensome on
small companies. Thus, USDA is proposing to revise the
[[Page 32499]]
November 2013 proposed rule so that certificates of exemption issued by
the Board remain valid for as long as the annual sales of the
respective manufacturers remain below the exemption thresholds. USDA is
proposing to revise Sec. 1211.53(b) accordingly, and is also proposing
to revise the related reporting burden requirements as detailed in the
section below titled Paperwork Reduction Act.
Paperwork Reduction Act
In accordance with the PRA of 1995 (44 U.S.C. Chapter 35), in the
November 2013 proposed rule, AMS announced its intention to request
approval of new information collection and recordkeeping requirements
for the proposed hardwood lumber and hardwood plywood program. In this
proposal, AMS requests comments on proposed revisions to the
information collection requirements contained in the November 2013
proposed rule.
Title: Hardwood Lumber and Hardwood Plywood Promotion, Research and
Information Order.
OMB Number: 0581-NEW.
Expiration Date of Approval: 3 years from approval date.
Type of Request: Proposed revisions to a new information collection
for research and promotion programs.
Abstract: AMS is proposing to amend the November 2013 proposed rule
for a national research and promotion program for hardwood lumber and
hardwood plywood that would reduce the information collection
requirements under the proposed program. AMS is taking this action in
response to comments received in response to the November 2013 proposed
rule. The information collection requirements in the request are
essential to carry out the intent of the 1996 Act.
In the 2013 proposed rule, AMS proposed that manufacturers of
hardwood lumber, hardwood products, and hardwood value-added products
with annual sales of less than $2 million, and hardwood plywood
manufacturers with annual sales of less than $10 million could submit a
written request to the Board for an exemption from paying assessments.
The request would be made on the form ``Application for Exemption from
Assessments.''
As mentioned previously, the November 2013 proposed rule stated
that manufacturers would need to submit this form every year to the
Board. Based on comments received, AMS is proposing to revise this
requirement so that companies with annual sales under the exemption
thresholds need only submit this form once to the Board.
Information collection requirements that are included in this
proposal include:
Application for Exemption From Assessments
Estimate of Burden: Public reporting burden for this collection of
information is estimated to average 0.25 hour per manufacturer
reporting on covered hardwood sold. Upon approval of an application,
manufacturers would receive an exemption certification.
Respondents: Hardwood lumber manufacturers and hardwood plywood
manufacturers who have annual sales of less than $2 million or less
than $10 million, respectively.
Estimated Number of Respondents: 497 (1,490 for the first year, 0
for the second year and potentially 2 annually thereafter).
Estimated Number of Responses per Respondent: 0.10 (1 every 10
years).
Estimated Total Annual Burden on Respondents: 124 (372 hours for
the first year, 0 hours for the second year and potentially 1 hour
thereafter).
Comments concerning the revised information collection requirements
contained in this action should reference OMB No. 0581-NEW. In
addition, the document number of this issue of the Federal Register
should also be referenced. Comments should be sent to the same
addresses referenced in the ADDRESSES section of this proposed rule.
As with all Federal promotion programs, reports and forms are
periodically reviewed to reduce information requirements and
duplication by industry and public sector agencies. Finally, USDA has
not identified any relevant Federal rules that duplicate, overlap, or
conflict with this proposed rule.
AMS is committed to complying with the E-Government Act, to promote
the use of the Internet and other information technologies to provide
increased opportunities for citizen access to Government information
and services, and for other purposes.
Comments are invited on: (a) Whether the proposed collection of
information is necessary for the proper performance of functions of the
proposed Order and USDA's oversight of the proposed Order, including
whether the information would have practical utility; (b) the accuracy
of USDA's estimate of the burden of the proposed collection of
information including the validity of the methodology and assumptions
used; (c) ways to enhance the quality, utility, and clarity of the
information to be collected; and (d) ways to minimize the burden of the
collection of information on those who are to respond, including the
use of appropriate automated, electronic, mechanical, or other
technological collection techniques or other forms of information
technology.
Incorporation by Reference
USDA is proposing to modify the term ``hardwood lumber products''
as defined in the November 2013 proposed rule in proposed section
1211.14 to link the definition to a grade standard defined in the
National Hardwood Lumber Association Rules for the Inspection of
Hardwood & Cypress. The standard ``Grade 3A Common,'' effective January
1, 2015, was discussed in greater detail in the section-by-section
analysis. The standard can be obtained from the National Hardwood
Lumber Association, PO Box 34518, Memphis, TN 38184; phone (901) 377-
1818; http://www.nhla.com/ and inspected at the Promotion and Economics
Division, Fruit and Vegetable Program, AMS, USDA, 1400 Independence
Avenue SW., Room 1406-S, Stop 0244, Washington, DC 20250-0244;
facsimile: (202) 205-2800.
While the proposal set forth below has not received the approval of
USDA, it is determined that the proposed Order, and the revisions
proposed herein, is consistent with and would effectuate the purposes
of the 1996 Act.
A 30-day comment period is provided to allow interested persons to
respond to this proposal. Thirty-days is deemed appropriate because
this proposal supplements a November 2013 proposed rule for a national
promotion program for hardwood lumber and plywood. All written comments
received in response to this proposed rule by the date specified will
be considered prior to finalizing this action.
The entire proposed Order is published for ease of reference.
List of Subjects in 7 CFR Part 1211
Administrative practice and procedure, Advertising, Consumer
information, Incorporation by reference, Marketing agreements, Hardwood
lumber promotion, Hardwood plywood promotion, Reporting and
recordkeeping requirements.
For the reasons set forth in the preamble, it is proposed that
title 7, chapter XI of the Code of Federal Regulations as proposed to
be added on November 13, 2013 (78 FR 68298), be amended as follows:
[[Page 32500]]
PART 1211--HARDWOOD LUMBER AND HARDWOOD PLYWOOD PROMOTION, RESEARCH
AND INFORMATION ORDER
Subpart A--Hardwood Lumber and Hardwood Plywood Promotion, Research and
Information Order
Definitions
Sec.
1211.1 Act.
1211.2 Blue Ribbon Committee.
1211.3 Board.
1211.4 Brokered sale.
1211.5 Concentration yard.
1211.6 Conflict of interest.
1211.7 Covered hardwood.
1211.8 Department or USDA.
1211.9 Fair market value.
1211.10 Fiscal period or fiscal year.
1211.11 Green air dried (G/AD) and Green (G) hardwood lumber.
1211.12 Hardwood lumber.
1211.13 Hardwood lumber manufacturer.
1211.14 Hardwood lumber products.
1211.15 Hardwood lumber value-added product manufacturer.
1211.16 Hardwood lumber value-added products.
1211.17 Hardwood plywood.
1211.18 Hardwood plywood manufacturer.
1211.19 Information.
1211.20 Kiln dried.
1211.21 Market or marketing.
1211.22 Manufacturer.
1211.23 Manufacturing.
1211.24 Member.
1211.25 Order.
1211.26 Part and subpart.
1211.27 Person.
1211.28 Programs, plans and projects.
1211.29 Promotion.
1211.30 Research.
1211.31 Sale.
1211.32 Secretary.
1211.33 State.
1211.34 Suspend.
1211.35 Terminate.
1211.36 Transfer.
1211.37 United States.
Hardwood Lumber and Hardwood Plywood Promotion, Research and
Information Board
1211.41 Establishment and membership.
1211.42 Nominations and appointments.
1211.43 Term of office.
1211.44 Removal and vacancies.
1211.45 Procedure.
1211.46 Reimbursement and attendance.
1211.47 Powers and duties of the Board.
1211.48 Prohibited activities.
Expenses and Assessments
1211.50 Budget and expenses.
1211.51 Financial statements.
Assessments
1211.52 Assessments.
1211.53 Exemption from assessment.
Promotion, Research and Information
1211.60 Programs, plans, and projects.
1211.61 Independent evaluation.
1211.62 Patents, copyrights, trademarks, information, publications,
and product formulations.
Reports, Books and Records
1211.70 Reports.
1211.71 Books and records.
1211.72 Confidentiality of information.
Miscellaneous
1211.80 Right of the Secretary.
1211.81 Referenda.
1211.82 Suspension and termination.
1211.83 Proceedings after termination.
1211.84 Effect of termination or amendment.
1211.85 Personal liability.
1211.86 Separability.
1211.87 Amendments.
1211.88 OMB control number.
Authority: 7 U.S.C. 7411-7425, 7 U.S.C. 7401.
Subpart A--Hardwood Lumber and Hardwood Plywood Promotion, Research
and Information Order
Sec. 1211.1 Act.
Act means the Commodity Promotion, Research and Information Act of
1996 (7 U.S.C. 7411-7425), and any amendments thereto.
Sec. 1211.2 Blue Ribbon Committee.
Blue Ribbon Committee means the 14-member committee representing
businesses that manufacture hardwood lumber, hardwood lumber products,
hardwood lumber value-added products and hardwood plywood in the United
States formed to pursue an industry promotion, research and information
program.
Sec. 1211.3 Board.
Board or Hardwood Lumber and Hardwood Plywood Promotion, Research
and Information Board means the administrative body established
pursuant to this Part. It may be referred to by such other name as the
Board recommends and the Secretary approves.
Sec. 1211.4 Brokered sale.
Brokered sale is a sale in which product is purchased from a person
and resold to a different person without taking physical possession of
the product.
Sec. 1211.5 Concentration yard.
Concentration yard means an operation with kilns that purchases
hardwood lumber from sawmills, or wholesalers by means of a brokered
sale, and may grade, sort, dry and/or surface the hardwood lumber. It
excludes distribution yards that do not have kilns.
Sec. 1211.6 Conflict of interest.
Conflict of interest means a situation in which a member or
employee of the Board has a direct or indirect financial interest in an
entity that performs a service for, or enters into a contract with, the
Board for anything of economic value.
Sec. 1211.7 Covered hardwood.
Covered hardwood means hardwood lumber, hardwood lumber products,
hardwood lumber value-added lumber products, and hardwood plywood to
which an assessment has been or may be levied pursuant to the Order.
Sec. 1211.8 Department or USDA.
Department or USDA means the United States Department of
Agriculture or any officer or employee of the Department to whom
authority has been delegated, or to whom authority may hereafter be
delegated, to act for the Secretary.
Sec. 1211.9 Fair market value.
Fair market value means, with respect to covered hardwood, the
value of the hardwood lumber as determined by a source recommended by
the Board and approved by the Secretary.
Sec. 1211.10 Fiscal period or fiscal year.
Fiscal period or fiscal year means a calendar year from January 1
through December 31, or such other period as recommended by the Board
and approved by the Secretary.
Sec. 1211.11 Green air dried (G/AD) and Green (G) hardwood lumber.
Greed air dried (G/AD) means green hardwood lumber or hardwood
lumber that has been dried by exposure to air in a yard or shed,
without artificial heat.
Green (G) hardwood lumber means hardwood lumber that has not been
kiln dried or air dried.
Sec. 1211.12 Hardwood lumber.
Hardwood lumber means timber from the wood of a cypress tree or a
deciduous, broad-leafed tree (including but not limited to aspen,
birch, cypress, poplar, yellow poplar, maple, cherry, walnut and oak)
grown in the United States that has been sawn into boards or blocks by
a sawmill in the United States.
Sec. 1211.13 Hardwood lumber manufacturer.
Hardwood lumber manufacturer means a person who cuts raw, green
hardwood logs into hardwood lumber or hardwood lumber products or a
person who kiln dries or air dries green hardwood lumber to create
hardwood lumber, hardwood lumber products or hardwood lumber value-
added products.
Sec. 1211.14 Hardwood lumber products.
Hardwood lumber products means hardwood G/AD/KD lumber that has
[[Page 32501]]
been transformed into products that remain boards meeting or exceeding
the level of ``Grade 3A Common'' in the Rules for the Inspection of
Hardwood & Cypress, effective January 1, 2015 (http://nhla.com/rulesbook), or equivalent proprietary standard, as recommended by the
Board and approved by the Secretary. For purposes of this Order,
hardwood lumber does not include industrial products which remain in
board or block form such as ties, cants, crane mat material, and pallet
stock or products which are transformed from boards or blocks of lumber
into other products such as furniture, tight cooperage, cabinetry, and
constructed pallets. ``Grade 3A Common,'' Rules for the Inspection of
Hardwood & Cypress, effective January 1, 2015, is incorporated by
reference into this section with the approval of the Director of the
Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce
any edition other than that specified in this section, USDA must
publish notice of change in the Federal Register and the material must
be available to the public. All approved material is available for
inspection at the Promotion and Economics Division, Fruit and Vegetable
Program, AMS, USDA, 1400 Independence Avenue SW., Room 1406-S, Stop
0244, Washington, DC 20250-0244; facsimile: (202) 205-2800, and is
available from National Hardwood Lumber Association, P.O. Box 34518,
Memphis, TN 38184; phone (901) 377-1818; http://www.nhla.com/. It is
also available for inspection at the National Archives and Records
Administration (NARA). For information on the availability of this
material at NARA, call (202) 741-6030 or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
Sec. 1211.15 Hardwood lumber value-added product manufacturer.
Hardwood lumber value-added product manufacturer means a person who
operates a sawmill to manufacture hardwood lumber value-added products
(the hardwood lumber may be air dried or kiln dried), or a person who
operates a kiln to dry hardwood lumber that is then used to manufacture
hardwood lumber value-added products.
Sec. 1211.16 Hardwood lumber value-added products.
Hardwood lumber value-added products means products which remain in
the general shape of hardwood lumber boards, but have undergone
additional processing beyond surfacing or cutting to a particular size.
Hardwood lumber value-added products include products such as solid
wood unfinished strip flooring, all-sides surfaced boards, finger-
jointed strips ripped to width, and moldings. For purposes of this
Order, hardwood lumber value-added products does not include industrial
products which remain in board or block form such as ties, cants, crane
mat material, and pallet stock or products which are transformed from
boards or blocks of lumber into other products, such as furniture,
tight cooperage, cabinetry, and constructed pallets. Further, it does
not include multi-component or further manufactured products such as
furniture, cabinets, cabinet doors, prefinished or engineered flooring,
pallets, or dimension or glued components for cabinets or furniture.
Sec. 1211.17 Hardwood plywood.
Hardwood plywood means a panel product, the decorative face of
which is made from hardwood veneer intended for interior use composed
of an assembly of layers or plies of veneer or veneers in combination
with lumber core, particleboard, medium density fiberboard core,
hardboard core, or special core or special back material joined with an
adhesive.
Sec. 1211.18 Hardwood plywood manufacturer.
Hardwood plywood manufacturer means a person who utilizes hardwood
logs, veneer, or lumber to create hardwood plywood.
Sec. 1211.19 Information.
Information means activities and programs that are designed to
develop new markets, marketing strategies, increase market efficiency,
and activities that are designed to enhance the image of hardwood
lumber, hardwood lumber products, hardwood lumber value-added products,
and hardwood plywood and the forests from which it comes in the United
States. These include:
(a) Consumer information, which means any action taken to provide
information to the general public regarding the harvesting,
consumption, use, and care of covered hardwood; and
(b) Industry information, which means any action taken to provide
information and programs that will lead to the development of new
markets, new marketing strategies, or increased efficiency for covered
hardwood, and activities to enhance the image of the hardwood lumber,
hardwood lumber products, hardwood lumber value-added products, and
hardwood plywood industries.
Sec. 1211.20 Kiln dried (KD).
Kiln dried (KD) means hardwood lumber that has been seasoned in a
kiln by means of artificial heat, humidity and circulation.
Sec. 1211.21 Market or marketing.
Marketing means the sale or other disposition of covered hardwood
in any channel of commerce. To market means to sell or otherwise
dispose of covered hardwood in any channel of commerce.
Sec. 1211.22 Manufacturer.
Manufacturer means any person who is engaged in the business of
manufacturing covered hardwood lumber in the United States as defined
in this Order.
Sec. 1211.23 Manufacturing.
Manufacturing means the process of transforming logs into hardwood
lumber, or the process of creating hardwood lumber products, hardwood
lumber value-added products, or hardwood plywood.
Sec. 1211.24 Member.
Member means a member appointed by the Secretary to the Hardwood
Lumber and Hardwood Plywood Promotion, Research and Information Board.
Sec. 1211.25 Order.
Order means an order issued by the Secretary under section 514 of
the Act that provides for a program of generic promotion, research and
information of covered hardwood under the Act.
Sec. 1211.26 Part and subpart.
Part means the Hardwood Lumber and Hardwood Plywood Promotion,
Research and Information Order and all rules, regulations, and
supplemental orders issued pursuant to the Act and the Order. The order
shall be a subpart of such part.
Sec. 1211.27 Person.
Person means any individual, group of individuals, partnership,
corporation, association, joint stock company, cooperative, or any
other legal entity.
Sec. 1211.28 Programs, plans and projects.
Programs, plans and projects mean those research, promotion and
information programs, plans, or projects established pursuant to this
Order.
Sec. 1211.29 Promotion.
Promotion means any action taken to present a favorable image of
hardwood lumber, hardwood lumber products, hardwood lumber value-added
products, and hardwood plywood to the general public and to any and all
[[Page 32502]]
consumers and those who influence consumption of covered hardwood
lumber with the intent of improving the perception, markets and
competitive position of covered hardwood lumber and stimulating sales
of covered hardwood lumber.
Sec. 1211.30 Research.
Research means any type of test, study, or analysis designed to
advance the knowledge, image, desirability, use, marketability,
production, product development, or quality of covered hardwood. The
term research includes the communication of the results of any research
conducted under this Part.
Sec. 1211.31 Sale.
For purposes of calculating the assessment, provided for in section
1211.52, a sale means the total dollar value of hardwood lumber,
hardwood lumber products, hardwood lumber value-added products, or
hardwood plywood that are sold from a hardwood lumber manufacturer or
hardwood plywood manufacturer. Sales, for purposes of the assessment,
do not include freight or discounts. Brokered sales are not included
within the meaning of sale.
Sec. 1211.32 Secretary.
Secretary means the Secretary of Agriculture of the United States
or any officer or employee of the Secretary to whom the Secretary has
delegated the authority to act on behalf of the Secretary.
Sec. 1211.33 State.
State means any of the several 50 States of the United States, the
District of Columbia, the Commonwealth of Puerto Rico, and the
territories and possessions of the United States.
Sec. 1211.33 Suspend.
Suspend means to issue a rule under section 553 of title 5 U.S.C.,
to temporarily prevent the operation of an order or part thereof during
a particular period of time specified in the rule.
Sec. 1211.34 Terminate.
Terminate means to issue a rule under section 553 of title 5
U.S.C., to cancel permanently the operation of an order or part thereof
beginning on a date specified in the rule.
Sec. 1211.35 Transfer.
Transfer means when a vertically integrated manufacturing plant in
which post-manufacturing operations turn an assessed hardwood product
(covered hardwood) into a non-assessed product while remaining under
the control of the same person.
Sec. 1211.36 United States or U.S.
United States or U.S. means collectively the 50 states, the
District of Columbia, the Commonwealth of Puerto Rico, and the
territories and possessions of the United States.
Hardwood Lumber and Hardwood Plywood Promotion, Research and
Information Board
Sec. 1211.41 Establishment and membership.
(a) There is hereby established a Hardwood Lumber and Hardwood
Plywood Promotion, Research and Information Board composed of 28
members who are either owners or employees of hardwood lumber
manufacturers or hardwood plywood manufacturers who are appointed by
the Secretary. Of the 28 members, 22 shall be hardwood lumber
manufacturers, one shall be a hardwood lumber value-added manufacturer
who manufactures flooring products, and five shall be hardwood plywood
manufacturers.
(b) The five members designated for hardwood plywood manufacturers
shall be appointed as follows:
(1) Three members shall be from the States that are west of the
Mississippi River; and
(2) Two members shall be from the States that are east of the
Mississippi River.
(c) The one member designated as a hardwood lumber value-added
products manufacturer of covered hardwood flooring products shall be
appointed from nominees from any State within the United States.
(d) The remaining 22 members designated as hardwood lumber
manufacturers, (exclusive of the hardwood flooring manufacturer) shall
be apportioned as follows:
(1) Six members from District 1, which consists of the States of
Connecticut, Delaware, Maine, Maryland, Massachusetts, New Hampshire,
New Jersey, New York, Pennsylvania, Rhode Island, Vermont, and West
Virginia and the District of Columbia;
(2) Four members from District 2, which consists of the States of
Florida, Georgia, North Carolina, South Carolina, Virginia, the
Commonwealth of Puerto Rico, and the U.S. territories;
(3) Five members from District 3, which consists of the States of
Alabama, Arkansas, Louisiana, Mississippi, Oklahoma, Tennessee, and
Texas;
(4) Six members from District 4, which consists of the States of
Illinois, Indiana, Iowa, Kansas, Kentucky, Michigan, Minnesota,
Missouri, Nebraska, North Dakota, Ohio, South Dakota, and Wisconsin;
and
(5) One member from District 5, which consists of the States of
Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada,
New Mexico, Oregon, Utah, Washington, and Wyoming.
(e) Once every five years, the Board will review data, including
assessment records, government, industry statistics, and other reliable
data, concerning the manufacturing of covered hardwood lumber. The
Board shall:
(1) Review the geographical distribution of the volume of covered
hardwood manufactured and sold by hardwood lumber, hardwood lumber
products, hardwood lumber value-added products, and hardwood plywood
manufacturers; and
(2) If warranted, recommend to the Secretary the reapportionment of
the Board membership to reflect changes in the geographical
distribution of the volume of covered hardwood manufactured and sold by
hardwood lumber, hardwood lumber products, hardwood lumber value-added
products, and hardwood plywood manufacturers. Any changes in Board
composition shall be implemented by the Secretary through rulemaking.
Sec. 1211.42 Nominations and appointments.
(a) Initial nominations will be submitted to the Secretary by the
Blue Ribbon Committee (BRC). Before considering any nominations, the
BRC shall publicize the nomination process, using trade press or other
means it deems appropriate, and shall outreach to all manufacturers
with annual sales of $2 million or more of hardwood lumber, hardwood
lumber products, and hardwood lumber value-added products and with
annual sales of $10 million or more of hardwood plywood per fiscal year
in order to generate nominees that reflect the different operations
within the hardwood lumber industry. The BRC may use regional caucuses,
mail or other methods to elicit potential nominees. The BRC and USDA
shall work together to publicize the nomination process so that
eligible candidates are aware of the opportunity to serve on the Board.
The BRC shall submit the nominations to the Secretary and recommend two
nominees for each Board position specified. In addition, nominees for
the initial Board may be submitted directly to the Secretary if
accompanied by the signatures of at least 20 persons who pay
assessments or will pay assessments under the Order. From the
nominations submitted by the BRC or directly to the Secretary, the
Secretary shall select the members of the Board.
[[Page 32503]]
(b) Subsequent nominations shall be conducted as follows:
(1) The Board shall outreach to all segments of the hardwood lumber
industry. The Board may also solicit nominees using existing regional
organizations. Initial and subsequent nominees must have annual sales
of $2 million or more of hardwood lumber, hardwood products, and
hardwood value-added products, or have annual sales of $10 million or
more of hardwood plywood per fiscal year;
(2) Manufacturer nominees may provide the Board a short background
statement outlining their qualifications to serve on the Board;
(3) Manufacturers who manufacture covered hardwood lumber in more
than one district may seek nomination only in the district in which
they manufacture the majority of the volume of their covered hardwood
lumber. The names of hardwood manufacturer nominees shall be placed on
a ballot by district. The ballots along with the background statements
shall be mailed to manufacturers in each respective district for a
vote. Manufacturers who manufacture covered hardwood lumber in more
than one district may only vote in the district in which they
manufacture the majority of the volume of their covered hardwood
lumber. The Board must submit nominations to the Secretary at least six
months before the new Board term begins. Before considering any
nominations, the Board shall publicize the nomination process, using
trade press or other means it deems appropriate, and shall outreach to
all sizes of manufacturers of covered hardwood in order to generate
nominees that reflect the different size of operations within the
hardwood lumber industry. The Board may use district caucuses or other
methods to elicit potential nominees. The votes shall be tabulated for
each district with the nominee receiving the highest number of votes at
the top of the list in descending order by vote. The top two candidates
for each position shall be submitted to the Secretary.
(4) No two members shall be employed by a single corporation,
company, partnership, or any other legal entity; and
(5) The Board may recommend to the Secretary modifications to its
nomination procedures as it deems appropriate. Any such modifications
shall be implemented through rulemaking by the Secretary.
Sec. 1211.43 Term of office.
(a) With the exception of the initial Board, each Board member will
serve a three-year term or until the Secretary selects his or her
successor. Each term of office shall begin on January 1 and end on
December 31, and no member may serve more than two consecutive terms,
excluding any term of office less than three years.
(b) For the initial Board, the terms of Board members shall be
staggered for two, three, and four years so that the terms of
approximately one-third of the Board expire in any given year.
Sec. 1211.44 Removal and vacancies.
(a) In the event that any member of the Board ceases to own or work
for a hardwood lumber or hardwood plywood manufacturer, or ceases to do
business in the district he or she represents, such position shall
become vacant.
(b) The Board may recommend to the Secretary that a member be
removed from office if the member consistently refuses to perform his
or her duties or engages in dishonest acts or willful misconduct. The
Secretary shall remove the member if he or she finds that the Board's
recommendation shows adequate cause. Further, without recommendation of
the Board, a member may be removed by the Secretary upon showing of
adequate cause, including the failure by a member to submit reports or
remit assessments required under this part. If the Secretary determines
that each member's continued service would be detrimental to the
achievement of the purposes of the Act.
(c) If a position becomes vacant, nominations to serve the
unexpired term will be handled using the nominations process set forth
in this Order. If the unexpired term has less than six months
remaining, the Secretary may leave the position vacant.
Sec. 1211.45 Procedure.
(a) At a Board meeting, a majority of the Board members duly
appointed by the Secretary will constitute a quorum. A member attending
the meeting by telephone or other electronic means shall be considered
present for purposes of quorum.
(b) All votes at meetings of the Board and any committees will be
cast in person or by electronic voting, including by telephone. Voting
by proxy will not be allowed.
(c) Each member of the Board will be entitled to one vote on any
matter put to the Board and the motion will carry if supported by more
than 50 percent of the Board members present or participating by
electronic means.
(d) The Board must give members and the Secretary timely notice of
all Board and committee meetings.
(e) In lieu of voting at a properly convened meeting, and when, in
the opinion of the Board's chairperson, such action is considered
necessary, the Board may take action by mail, telephone, electronic
mail, facsimile, or any other means of communication. Any action taken
under this procedure is valid only if:
(1) All members and the Secretary are notified and the members are
provided the opportunity to vote;
(2) A majority of the members vote in favor of the action; and
(3) All votes are promptly confirmed in writing and recorded in the
Board minutes.
Sec. 1211.46 Reimbursement and attendance.
Board members will serve without compensation. Board members will
be reimbursed for reasonable travel expenses, as approved by the Board,
which they incur when performing Board business.
Sec. 1211.47 Powers and duties of the Board.
The Board shall have the following powers and duties:
(a) To administer this Order in accordance with its terms and
conditions and to collect assessments;
(b) To develop and recommend to the Secretary for approval such
bylaws, rules, and regulations as may be necessary for the functioning
of the Board and for administering the Order, including activities
authorized to be carried out under the Order;
(c) To meet, organize, and select from among its members a
chairperson and such other officers as the Board deems necessary;
(d) To create any committees, including an executive committee, or
subcommittees, as the Board deems necessary from its membership.
Subcommittees may include individuals other than Board members;
(e) To employ or contract persons, other than the Board members, as
the Board considers necessary to assist the Board in carrying out its
duties and to determine the compensation and specify the duties of such
persons or to contract such services from an organization and to enter
into contracts or agreements in order to carry out authorized
functions;
(f) To provide appropriate notice of meetings to the industry and
USDA and keep minutes of such meetings;
(g) To develop and administer programs, plans, and projects and
enter into contracts or agreements, which must be approved by the
Secretary before becoming effective, for promotion, research and
information, including consumer and industry information, research and
advertising
[[Page 32504]]
designed to strengthen hardwood lumber industry's position in the
marketplace and to maintain, develop, and expand markets for covered
hardwood lumber. The payment of costs for such activities shall be with
funds collected pursuant to the Order, including funds collected
pursuant to section 1211.50(f). Each contract or agreement shall
provide that:
(1) The contractor or agreeing party shall develop and submit to
the Board a program, plan, or project together with a budget that
specifies the cost to be incurred to carry out the activity;
(2) The contractor or agreeing party shall keep accurate records of
all of its transactions and make periodic reports to the Board of
activities conducted, submit accounting for funds received and
expended, and make such other reports as the Secretary or Board may
require;
(3) The Secretary may audit the records of the contracting or
agreeing party periodically; and
(4) Any subcontractor who enters into a contract with a Board
contractor and who receives or otherwise uses funds allocated by the
Board shall be subject to the same provisions as the contractor.
(h) To prepare and submit to the Secretary for approval 60 calendar
days in advance of the beginning of a fiscal period, rates of
assessment and a budget of the anticipated expenses to be incurred in
the administration of the Order, including the probable cost of each
promotion, research and information activity proposed to be developed
or carried out by the Board;
(i) To maintain such records and books and prepare and submit such
reports and records from time to time to the Secretary as the Secretary
may prescribe; to make appropriate accounting with respect to the
receipt and disbursement of all funds entrusted to it; and to keep
records that accurately reflect the actions and transactions of the
Board;
(j) To act as an intermediary between the Secretary and any
manufacturer;
(k) To cause its books to be audited by a certified public
accountant at the end of each fiscal year and at such other times as
the Secretary may request, and to submit a report of the audit to the
Secretary;
(l) To recommend changes to the assessment rate as provided in this
part;
(m) To borrow funds necessary for startup expenses of the Order;
(n) To receive, investigate, and report to the Secretary complaints
of violations of the Order, including investigating complaints of
violation, and ensuring consistent, uniform and appropriate application
of this Part;
(o) To consider and recommend to the Secretary new products and the
application of the assessment to such products.
(p) To recommend to the Secretary such amendments to the Order as
the Board considers appropriate;
(q) To periodically prepare and make public and to make available
to manufacturers reports of its activities and, at least once each
fiscal period, to make public an accounting of funds received and
expended;
(r) To invest assessment funds collected but not yet disbursed
pursuant to this Part. Investments shall be in any interest-bearing
account or certificate of deposit of a bank that is a member of the
Federal Reserve System, obligations fully guaranteed as to principal
and interest by the United States or any agency of the United States,
or general obligations of any State or any political subdivision of a
State.
(s) To work to achieve an effective, continuous, and coordinated
program of promotion, research, consumer information, evaluation, and
industry information designed to strengthen the hardwood lumber,
hardwood lumber products, hardwood lumber value-added products, and
hardwood plywood industry's position in the market; maintain and expand
existing markets and uses for covered hardwood; and to carry out
programs, plans, and projects designed to provide maximum benefits to
the hardwood lumber, hardwood lumber products, hardwood lumber value-
added products and hardwood plywood industries.
Sec. 1211.48 Prohibited activities.
The Board may not engage in, and shall prohibit the employees and
agents of the Board from engaging in:
(a) Any action that is a conflict of interest;
(b) Using funds collected by the Board under the Order to undertake
any action for the purpose of influencing legislation or governmental
action or policy, by local, state, national, and foreign governments,
other than recommending to the Secretary amendments to this Part; and
(c) No program, plan, or project including advertising shall be
false or misleading, or disparaging to another agricultural commodity.
Expenses and Assessments
Sec. 1211.50 Budget and expenses.
(a) At least 60 days before the beginning of each fiscal year, and
as may be necessary thereafter, the Board shall prepare and submit to
the Secretary a budget for the fiscal year covering its anticipated
expenses and disbursements in administering the Order. Each such
budget, which must be approved by the Secretary before it is
implemented, shall include:
(1) A statement of objectives and strategy for each program, plan,
or project developed and approved by the Board;
(2) A summary of anticipated revenue, with comparative data or at
least one preceding year (except for the initial budget);
(3) A summary of proposed expenditures for each program, plan, or
project; and
(4) Staff and administrative expense breakdowns, with comparative
data for at least one preceding year (except for the initial budget).
(b) Each budget shall provide adequate funds to defray its proposed
expenditures and to provide for a reserve.
(c) Subject to this section, any amendment or addition to an
approved budget must be approved by the Department, including shifting
funds from one program, plan, or project to another. Shifts of funds
which do not cause an increase in the Board's approved budget and which
are consistent with governing bylaws need not have prior approval by
the Secretary.
(d) The Board may incur such expenses, including provision for a
reserve, as are reasonable and likely to be incurred for maintenance
and functioning of the Board, and to enable it to exercise its powers
and perform its duties in accordance with the provisions of the Order.
Such expenses shall be paid from funds received by the Board.
(e) With approval of the Secretary, the Board may borrow money for
the payment of administrative expenses, subject to the same fiscal,
budget, and audit controls as other funds of the Board. Any funds
borrowed by the Board shall be expended only for startup costs and
capital outlays and are limited to the first year of operation by the
Board.
(f) The Board may accept voluntary contributions, and is encouraged
to seek other appropriate funding sources to carry out activities
authorized by the Order. Such contributions shall be free from any
encumbrances by the donor and the Board shall retain complete control
of their use. The Board may receive funds from outside sources (i.e.,
Federal or State grants, Foreign Agricultural Service funds), with
approval of the Secretary, for specific authorized projects.
(g) The Board shall reimburse the Secretary for all expenses the
Secretary
[[Page 32505]]
incurs in the implementation, administration, and supervision of this
Part, including all costs relating to the conducting of a referendum in
connection with this Part.
(h) For fiscal years beginning three years after the establishment
of the Board, the Board may not expend for administration, maintenance,
and functioning of the Board in any fiscal year an amount that exceeds
15 percent of the assessments and other income received by the Board
for that fiscal year. Reimbursements to the Secretary required under
this section are excluded from this limitation on spending.
(i) The Board may establish an operating monetary reserve and may
carry over to subsequent fiscal periods excess funds in any reserve so
established: Provided, That, the funds in the reserve do not exceed one
fiscal period's budget of expenses. Subject to approval by the
Secretary, such reserve funds may be used to defray any expenses
authorized under this subpart.
(j) Pending disbursement of assessments and all other revenue under
a budget approved by the Secretary, the Board may invest assessments
and all other revenues collected under this part in:
(1) Obligations of the United States or any agency of the United
States;
(2) General obligations of any State or any political subdivision
of a State;
(3) Interest bearing accounts or certificates of deposit of
financial institutions that are members of the Federal Reserve System;
(4) Obligations fully guaranteed as to principal interest by the
United States; or
(5) Other investments as authorized by the Secretary.
Sec. 1211.51 Financial statements.
(a) Upon the Secretary's request, the Board shall prepare and
submit financial statements to the Secretary on a monthly or quarterly
basis, or at any other time as requested by the Secretary. Each such
financial statement shall include, but not be limited to, a balance
sheet, income statement, and expense budget. The expense budget shall
show expenditures during the time period covered by the report, year-
to-date expenditures, and the unexpended budget.
(b) Each financial statement shall be submitted to the Secretary
within 30 days after the end of the time period to which it applies.
(c) The Board shall submit to the Secretary an annual financial
statement within 90 days after the end of the fiscal year to which it
applies.
Assessments
Sec. 1211.52 Assessments.
(a) The Board's programs and expenses shall be paid by assessments
on manufacturers of covered hardwood, other income of the Board, and
other funds available to the Board. This section authorizes hardwood
lumber manufacturers to be assessed on hardwood plywood and hardwood
lumber, both in its green (rough) form and as it is kiln dried or air
dried to create hardwood lumber products and hardwood lumber value-
added products.
(b) Subject to the exemption specified in Sec. 1211.53, each
manufacturer shall pay the following assessment:
------------------------------------------------------------------------
Allowable deductions
Covered hardwood Assessment rate \1\
------------------------------------------------------------------------
Hardwood lumber............. $1/$1,000 in sales.. N/A.
Hardwood lumber products.... $1/$1,000 in sales.. --dollar value of
hardwood lumber
purchases.
Hardwood lumber value-added $0.75/$1,000 in --dollar value of
products. sales of value- hardwood lumber
added product plus purchases.
$1.00 per $1,000 in
sales of green (G/
AD/KD) hardwood
lumber.
Hardwood plywood............ $3/$1,000 in sales.. N/A.
------------------------------------------------------------------------
\1\ The deductions are necessary to take into account assessments
already paid on green (G/AD/KD) hardwood lumber purchased by the
manufacturer to make the product or value-added product.
(1) Hardwood lumber manufacturers that cut raw, green hardwood logs
into hardwood lumber or kiln dry or air dry hardwood lumber that can be
further processed into products shall pay at the rate of $1.00 per
$1,000 in sales of green (G/AD/KD) hardwood lumber;
(2) Hardwood lumber manufacturers that manufacture hardwood lumber
products shall pay at a rate of $1.00 per $1,000 in sales of hardwood
lumber products minus the dollar value of green (G/AD/KD) hardwood
lumber purchases;
(3) Hardwood lumber value-added product manufacturers shall pay a
rate of $0.75 per $1,000 in sales of hardwood lumber value-added
products, plus $1.00 per $1,000 in sales of green (G/AD/KD) hardwood
lumber, minus the dollar value of the green (G/AD/KD) hardwood lumber
purchases; and
(4) Hardwood plywood manufacturers shall pay at the rate of $3.00
per $1,000 in sales of hardwood plywood lumber.
(5) Brokered sales of hardwood lumber or hardwood lumber products
are excluded from the calculation of assessments.
(6) Vertically integrated manufacturers that manufacture hardwood
lumber, then transfer the lumber from one business unit to another
within the same company to manufacture non-assessed product, shall pay
assessments based on the fair market value of the non-assessed product,
minus the fair market value of the green (G/AD/KD) hardwood lumber,
minus the fair market value of the green (G/AD/KD) hardwood lumber
purchases times $0.001. This formula is necessary to ensure that
covered hardwood lumber in a vertically integrated company is
appropriately assessed.
(c) Assessments shall be remitted to the Board on a quarterly
basis, accompanied by a form that the Board shall develop, no later
than thirtieth calendar day of the month following the end of the
quarter in which the covered hardwood lumber was marketed. Any
information collected pursuant to the collection of assessments, shall
be kept confidential as specified in Sec. 1211.72 so that no Board
member or person subject to assessment shall have access to such
information.
(d) The assessment rate specified in this section may be changed
only upon a recommendation by the Board to the Secretary for
implementation through rulemaking.
(e) If the assessment is not paid within 60 calendar days of the
date it is due, the Board may impose a late payment charge and
interest. The late payment charge and rate of interest shall be
recommended by the Board to the Secretary through rulemaking. Persons
failing to remit total assessments due in a timely manner may also be
subject to actions under federal debt collection procedures.
(f) The Board may accept advance payment of assessments that will
be credited toward any amount for which that person may become liable.
The Board may not pay interest on any advance payment.
[[Page 32506]]
(g) If the Board is not in place by the date the first assessments
are to be collected, the Secretary shall receive assessments and invest
them on behalf of the Board, and shall pay such assessments and any
interest earned to the Board when it is established.
(h) The Board may authorize other organizations to collect
assessments on its behalf with the approval of the Secretary.
Sec. 1211.53 Exemption from assessment.
(a) Small hardwood lumber manufacturers and small hardwood plywood
manufacturers shall be exempt from paying assessments as follows:
(1) Hardwood lumber manufacturers, hardwood lumber product
manufacturers, and hardwood lumber value-added products manufacturers
with sales of any assessed product combined to be less than $2 million
are exempt from paying assessments.
(2) Hardwood plywood manufacturers with annual sales of less than
$10 million are exempt from paying assessments.
(b) Hardwood lumber manufacturers and hardwood plywood
manufacturers who meet the exemption threshold shall apply for an
exemption, on a form provided by the Board. The certificate of
exemption shall remain valid for as long as the annual sales of the
respective hardwood lumber manufacturer and hardwood plywood
manufacturer remain under the exemption threshold. Upon receipt of an
application for exemption, the Board shall determine whether an
exemption may be granted. The Board will then issue, if deemed
appropriate, a certificate of exemption to each manufacturer who is
eligible to receive one. Each person shall retain a copy of the
certificate of exemption. The Board may develop additional procedures
to administer this exemption as appropriate. Such procedures shall be
implemented through rulemaking by the Secretary.
(c) Hardwood lumber manufacturers who did not apply to the Board
for an exemption and have annual sales of less than $2 million or
hardwood plywood manufacturers that have annual sales of less than $10
million during the fiscal year shall receive a refund from the Board
for the applicable assessments within 30 calendar days after the end of
the fiscal year. Board staff shall determine the assessments paid and
refund the amount due to the manufacturer accordingly.
(d) Hardwood lumber manufacturers who received an exemption
certificate from the Board but have annual sales of $2 million or more
or hardwood plywood manufacturers that have annual sales of $10 million
or more during the fiscal year shall pay the Board the applicable
assessments owed on the annual sales of the covered hardwood within 30
calendar days after the end of the fiscal year and submit any necessary
reports to the Board pursuant to Sec. 1211.70.
(e) Organic. (1) A hardwood lumber or hardwood plywood manufacturer
who operates under an approved National Organic Program (7 CFR part
205) (NOP) organic handling system plan may be exempt from the payment
of assessments under this part provided that:
(i) Only agricultural products certified as ``organic'' or ``100
percent organic'' (as defined in the NOP) are eligible for exemption;
(ii) The exemption shall apply to all certified ``organic'' or
``100 percent organic'' (as defined in the NOP) products of a
manufacturer regardless of whether the agricultural commodity subject
to the exemption is manufactured by a person that also manufactures
conventional or non-organic agricultural products of the same
agricultural commodity as that for which the exemption is claimed;
(iii) The manufacturer maintains a valid certificate of organic
operation as issued under the Organic Foods Production Act of 1990 (7
U.S.C. 6501-6522) (OFPA) and the NOP regulations issued under OFPA (7
CFR part 205); and
(iv) Any manufacturer so exempted shall continue to be obligated to
pay assessments under this part that are associated with any
agricultural products that do not qualify for an exemption under this
section.
(2) To apply for exemption under this section, an eligible
manufacturer shall submit a request to the Board on an Organic
Exemption Request Form (Form AMS-15) at any time during the year
initially, and annually thereafter on or before the start of the fiscal
year, as long as the manufacturer continues to be eligible for the
exemption.
(3) A manufacturer request for exemption shall include the
following:
(i) The applicant's full name, company name, address, telephone and
fax numbers, and email address (optional);
(ii) Certification that the applicant maintains a valid certificate
of organic operation issued under the OFPA and the NOP;
(iii) Certification that the applicant manufactures organic
products eligible to be labeled ``organic'' or ``100 percent organic''
under the NOP;
(iv) A requirement that the applicant attach a copy of their
certificate of organic operation issued by a USDA-accredited certifying
agent under the OFPA and the NOP;
(v) Certification, as evidenced by signature and date, that all
information provided by the applicant is true; and
(vi) Such other information as may be required by the Board, with
the approval of the Secretary.
(4) If a manufacturer complies with the requirements of this
section, the Board will grant an assessment exemption and issue a
Certificate of Exemption to the manufacturer within 30 calendar days.
If the application is disapproved, the Board will notify the applicant
of the reason(s) for disapproval within the same timeframe.
(5) The exemption will apply immediately following the issuance of
a Certificate of Exemption.
(f) The Board may develop additional procedures to administer this
exemption as appropriate. Such procedures shall be implemented through
rulemaking by the Secretary.
Promotion, Research and Information
Sec. 1211.60 Programs, plans, and projects.
(a) The Board shall develop and submit to the Secretary for
approval programs, plans, and projects authorized under this Part. Such
programs, plans, or projects shall provide for the establishment,
issuance, implementation, and administration of appropriate programs
for promotion, research and information with respect to covered
hardwood.
(b) No program, plan, or project shall be implemented prior to its
approval by the Secretary. Once the Secretary approves a program, plan,
or project, the Board shall take appropriate steps to implement it.
(c) The Board shall periodically review or evaluate each program,
plan, or project implemented under this subpart to ensure that it
contributes to an effective program of promotion, research or
information. If the Board finds that any such program, plan, or project
does not contribute to an effective program of promotion, research or
information, then the Board shall terminate such program, plan, or
project.
Sec. 1211.61 Independent evaluation.
Within four years of the first Board meeting and at least once
every five years thereafter, the Board shall authorize and fund an
independent evaluation of the effectiveness of the Order and programs
conducted by the Board pursuant to the Act. The Board shall submit to
the Secretary and make available to the public the results of
[[Page 32507]]
each periodic independent evaluation conducted under this section.
Sec. 1211.62 Patents, copyrights, trademarks, information,
publications, and product formulations.
Patents, copyrights, trademarks, information, publications, and
product formulations developed through the use of funds received by the
Board under this part shall be the property of the U.S. Government, as
represented by the Board, and shall, along with any rents, royalties,
residual payments, or other income from the rental, sales, leasing,
franchising, or other uses of such patents, copyrights, trademarks,
information, publications, or product formulations, inure to the
benefit of the Board; shall be considered income subject to the same
fiscal, budget, and audit controls as other funds of the Board; and may
be licensed subject to approval by the Secretary. Upon termination of
this part, Sec. 1211.83 shall apply to determine disposition of all
such property.
Reports, Books and Records
Sec. 1211.70 Reports.
(a) Each hardwood lumber manufacturer and hardwood lumber plywood
manufacturer will be required to provide periodically to the Board
staff such information as the Board, with the approval of the
Secretary, may require. Such information may include, but not be
limited to:
(1) The name, address and telephone number of the manufacturer;
(2) The annual sales of covered hardwood lumber; and
(3) The annual sales of covered hardwood lumber for which
assessments were paid.
(b) Such information shall accompany the collected payment of
assessments on a quarterly basis specified in Sec. 1211.52.
Sec. 1211.71 Books and records.
Each manufacturer, including those exempt under Sec. 1211.53,
shall maintain any books and records necessary to carry out the
provisions of this subpart and regulations issued thereunder, including
such records as are necessary to verify any required reports. Such
books and records must be made available during normal business hours
for inspection by the Board's or Secretary's employees or agents. A
manufacturer must maintain the books and records for two years beyond
the fiscal period to which they apply.
Sec. 1211.72 Confidentiality of information.
All information obtained from books, records, or reports under the
Act, this subpart and the regulations issued thereunder shall be kept
confidential by all persons, including all employees and former
employees of the Board, all officers and employees and former officers
and employees of contracting and subcontracting agencies or agreeing
parties having access to such information. Such information shall not
be available to Board members or other manufacturers. Only those
persons having a specific need for such information solely to
effectively administer the provisions of this subpart shall have access
to such information. Only such information so obtained as the Secretary
deems relevant shall be disclosed by them, and then only in a judicial
proceeding or administrative hearing brought at the direction, or at
the request, of the Secretary, or to which the Secretary or any officer
of the United States is a party, and involving this subpart. Nothing in
this section shall be deemed to prohibit:
(a) The issuance of general statements based upon the reports of
the number of persons subject to this subpart or statistical data
collected therefrom, which statements do not identify the information
furnished by any person; and
(b) The publication, by direction of the Secretary, of the name of
any person who has been adjudged to have violated this part, together
with a statement of the particular provisions of this part violated by
such person.
Miscellaneous
Sec. 1211.80 Right of the Secretary.
All fiscal matters, programs, plans, or projects, rules or
regulations, reports, or other substantive actions proposed and
prepared by the Board shall be submitted to the Secretary for approval.
Sec. 1211.81 Referenda.
(a) Initial referendum. The Order shall not become effective unless
the Order is approved by a majority of manufacturers voting in the
referendum who also represent a majority of the volume (board foot or
equivalent) of covered hardwood lumber represented in the referendum
and who, during a representative period determined by the Secretary,
were engaged in the manufacturing of covered hardwood lumber.
(b) Subsequent referenda. Five years after the initial meeting of
the Board, the Secretary shall hold a referendum to determine whether
manufacturers favor the continuation of the Order. Thereafter, the
Secretary shall conduct a referendum at least every seven years. The
Order shall continue if it is favored by a majority of manufacturers
voting in the referendum who also represent a majority of the volume
(board foot or equivalent) of covered hardwood lumber represented in
the referendum and who, during a representative period determined by
the Secretary, were engaged in the manufacturing of covered hardwood
lumber. The Secretary will also conduct a referendum if requested by
the Board or if requested by 10 percent or more of all manufacturers
eligible to vote in a referendum. In addition, the Secretary may hold a
referendum at any time.
Sec. 1211.82 Suspension and termination.
(a) The Secretary shall suspend or terminate this part or subpart
or a provision thereof, if the Secretary finds that this part or
subpart or a provision thereof obstructs or does not tend to effectuate
the purposes of the Act, or if the Secretary determines that this
subpart or a provision thereof is not favored by persons voting in a
referendum conducted pursuant to the Act.
(b) The Secretary shall suspend or terminate this subpart at the
end of the fiscal period whenever the Secretary determines that its
suspension or termination is favored by a majority of manufacturers
voting in the referendum who represent a majority of the volume (board
foot or equivalent) represented in the referendum, and who, during a
representative period determined by the Secretary, have been engaged in
the manufacturing of covered hardwood lumber.
(c) If, as a result of a referendum the Secretary determines that
this subpart is not approved, the Secretary shall:
(1) Not later than one hundred and eighty (180) calendar days after
making the determination, suspend or terminate, as the case may be, the
collection of assessments under this subpart.
(2) As soon as practical, suspend or terminate, as the case may be,
activities under this subpart in an orderly manner.
Sec. 1211.83 Proceedings after termination.
(a) Upon the termination of this subpart, the Board shall recommend
to the Secretary not more than five of its members to serve as trustees
for the purpose of liquidating the affairs of the Board. Such persons,
upon designation by the Secretary, shall become trustees of all of the
funds and property then in the possession or under control of the
Board, including claims for any funds unpaid or property not delivered,
or any other claim existing at the time of such termination.
(b) The said trustees shall:
[[Page 32508]]
(1) Continue in such capacity until discharged by the Secretary;
(2) Carry out the obligations of the Board under any contracts or
agreements entered into pursuant to the Order;
(3) From time to time, account for all receipts and disbursements
and deliver all property on hand, together with all books and records
of the Board and the trustees, to such person or persons as the
Secretary may direct; and
(4) Upon request of the Secretary, execute such assignments or
other instruments necessary and appropriate to vest in such persons
title and right to all funds, property and claims vested in the Board
or the trustees pursuant to the Order.
(c) Any person to whom funds, property or claims have been
transferred or delivered pursuant to the Order shall be subject to the
same obligations imposed upon the Board and upon the trustees.
(d) Any residual funds not required to defray the necessary
expenses of liquidation shall be turned over to the Secretary to be
disposed of, to the extent practical, to one or more hardwood lumber
and hardwood plywood industry organizations in the interest of
continuing hardwood lumber and hardwood plywood promotion, research and
information programs.
Sec. 1211.84 Effect of termination or amendment.
Unless otherwise expressly provided by the Secretary, the
termination or amendment of this part or any subpart thereof, shall
not:
(a) Affect or waive any right, duty, obligation or liability which
shall have arisen or which may thereafter arise in connection with any
provision of this part; or
(b) Release or extinguish any violation of this part; or
(c) Affect or impair any rights or remedies of the United States,
or of the Secretary, or of any other persons with respect to any such
violation.
Sec. 1211.85 Personal liability.
No member or employee of the Board shall be held personally
responsible, either individually or jointly with others, in any way
whatsoever, to any person for errors in judgment, mistakes, or other
acts, either of commission or omission, as such member or employee,
except for acts of dishonesty or willful misconduct.
Sec. 1211.86 Separability.
If any provision of this subpart is declared invalid or the
applicability thereof to any person or circumstances is held invalid,
the validity of the remainder of this subpart or the applicability
thereof to other persons or circumstances shall not be affected
thereby.
Sec. 1211.87 Amendments.
Amendments to this subpart may be proposed from time to time by the
Board or by any interested person affected by the provisions of the
Act, including the Secretary.
Sec. 1211.88 OMB control number.
The control numbers assigned to the information collection
requirements of this part by the Office of Management and Budget
pursuant to the Paperwork Reduction Act of 1995, 44 U.S.C. chapter 35,
are OMB control number 0505-0001 (Board nominee background statement)
and OMB control number 0581-NEW.
Dated: June 1, 2015.
Erin Morris,
Associate Administrator.
[FR Doc. 2015-13719 Filed 6-8-15; 8:45 am]
BILLING CODE 3410-02-P