[Federal Register Volume 81, Number 91 (Wednesday, May 11, 2016)]
[Notices]
[Page 29325]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-10977]



[[Page 29325]]

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration


Hazardous Materials: Notice of Applications for Modification of 
Special Permit

AGENCY: Office of Hazardous Materials Safety, Pipeline and Hazardous 
Materials Safety Administration (PHMSA), DOT.

ACTION: List of Applications for Modification of Special Permits.

-----------------------------------------------------------------------

SUMMARY: In accordance with the procedures governing the application 
for, and the processing of, special permits from the Department of 
Transportation's Hazardous Material Regulations (49 CFR part 107, 
subpart B), notice is hereby given that the Office of Hazardous 
Materials Safety has received the application described herein. Each 
mode of transportation for which a particular special permit is 
requested is indicated by a number in the ``Nature of Application'' 
portion of the table below as follows: 1--Motor vehicle, 2--Rail 
freight, 3--Cargo vessel, 4--Cargo aircraft only, 5--Passenger-carrying 
aircraft.

DATES: Comments must be received on or before June 10, 2016.
    Address Comments To: Record Center, Pipeline and Hazardous 
Materials Safety Administration U.S. Department of Transportation 
Washington, DC 20590.
    Comments should refer to the application number and be submitted in 
triplicate. If confirmation of receipt of comments is desired, include 
a self-addressed stamped postcard showing the special permit number.

FOR FURTHER INFORMATION CONTACT: Ryan Paquet, Director, Office of 
Hazardous Materials Approvals and Permits Division, Pipeline and 
Hazardous Materials Safety Administration, U.S. Department of 
Transportation, East Building, PHH-30, 1200 New Jersey Avenue 
Southeast, Washington, DC 20590-0001, (202) 366-4535.

SUPPLEMENTARY INFORMATION: Copies of the applications are available for 
inspection in the Records Center, East Building, PHH-30, 1200 New 
Jersey Avenue Southeast, Washington, DC or at http://regulations.gov.
    This notice of receipt of applications for special permit is 
published in accordance with Part 107 of the Federal hazardous 
materials transportation law (49 U.S.C. 5117(6); 49 CFR 1.53(b)).

    Issued in Washington, DC, on April 21, 2016.
Donald Burger,
Chief, Office of General Approvals and Permits.

                                              Special Permits Data
----------------------------------------------------------------------------------------------------------------
                                                                         Regulation(s)     Nature of the special
        Application No.              Docket No.         Applicant           affected          permits thereof
----------------------------------------------------------------------------------------------------------------
13112-M........................  .................  Carleton           3, 302A..........  To modify the special
                                                     Technologies,                         permit to authorize
                                                     Inc.                                  testing of the
                                                                                           pressure relief
                                                                                           function by primer
                                                                                           auto ignition to take
                                                                                           place at the
                                                                                           initiator chamber
                                                                                           assembly level
                                                                                           instead of at the
                                                                                           final pressure vessel
                                                                                           assembly level.
14920-M........................  .................  Nordco Rail        173.302a(b),       To modify the special
                                                     Services &         172.203(a),        permit to authorize
                                                     Inspection         172.301(c),        3A, 3AL, and DOT-SP
                                                     Technologies Inc.  180.205.           12440 cylinders to be
                                                                                           retested by a 100%
                                                                                           ultrasonic
                                                                                           examination, marking
                                                                                           requirements equal to
                                                                                           or less than 5
                                                                                           inches, different
                                                                                           dimensions of a flat
                                                                                           bottom hole to be
                                                                                           used during
                                                                                           ultrasonic
                                                                                           examinations, and add
                                                                                           an acceptable level
                                                                                           of tolerances to the
                                                                                           maximum achieved
                                                                                           reference amplitude.
16323-M........................  .................  Fibre Drum Sales,  178.801(f).......  To modify the special
                                                     Inc.                                  permit to remove the
                                                                                           requirement to
                                                                                           perform a leak
                                                                                           proofness test on
                                                                                           remanufactured
                                                                                           composite IBCs.
----------------------------------------------------------------------------------------------------------------


[FR Doc. 2016-10977 Filed 5-10-16; 8:45 am]
 BILLING CODE 4910-60-M