[Federal Register Volume 81, Number 106 (Thursday, June 2, 2016)]
[Notices]
[Pages 35351-35356]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-13028]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2016-0023; FRL-9946-86]
Certain New Chemicals; Receipt and Status Information for April
2016
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to
[[Page 35352]]
manufacture those chemicals. This document covers the period from April
1, 2016 to April 29, 2016.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before July 5, 2016.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2016-0023, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at http://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at http://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Information Management Division, 7407M, Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the
period from April 1, 2016 to April 29, 2016, and consists of the PMNs
and TMEs both pending and/or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new'' chemical, while those that are on the TSCA Inventory are
classified as an ``existing'' chemical. For more information about the
TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 58 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; the
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the potential
uses identified by the manufacturer/importer in the PMN; and the
chemical identity.
Table 1--PMNs Received From April 1, 2016 to April 29, 2016
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected end
Case No. Date received date for EPA Manufacturer/ Importer Use(s) Chemical identity
review
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-16-0095........................... 4/11/2016 7/10/2016 CBI.................... (G) Flame retardant additive (G) Phenol-formaldehyde
resin.
P-16-0119........................... 4/20/2016 7/19/2016 CBI.................... (G) Intermediate............ (G) Chlorofluorocarbon.
P-16-0150........................... 4/26/2016 7/25/2016 CBI.................... (G) Intermediate............ (G) Chlorofluorocarbon.
[[Page 35353]]
P-16-0267........................... 4/20/2016 7/19/2016 Allnex USA, Inc........ (S) Electro-deposition (G) Fatty acids, reaction
primer. products with alkylamine,
polymers with substituted
carbomonocycle,
substituted alkylamines,
heteromonocycle and
substituted alkanoate,
lactates (salts).
P-16-0277........................... 4/1/2016 6/30/2016 Organic Dyestuffs (S) Metalized dye for dyeing (S) Chromate(1-), hydroxy[2-
Corporation. wool with good fastness (hydroxy-ko)-3-[2-[2-
properties. (hydroxy-ko)-1-
naphthalenyl]diazenyl-kn1]-
5-nitrobenzenesulfonato(3-
)]-, sodium (1:1).
P-16-0279........................... 4/4/2016 7/3/2016 Akzo Nobel Surface (G) Component in paints..... (S) Hexanamide, n,-[3-
Chemistry, LLC. (dimethylamino)propyl]-,
compd, with 2-
methyloxirane polymer with
oxirane mono (2-
ethylhexyl) ether
phosphate.
P-16-0281........................... 4/11/2016 7/10/2016 CBI.................... (G) Reactive polyol......... (G) Fatty alcohols--dimers,
trimmers, polymers.
P-16-0287........................... 4/1/2016 6/30/2016 CBI.................... (G) Hardener for epoxy (G) Alkanoic acid, 2-
coating. substituted-methyl ester,
reaction products with
aromatic diamine-
[alkanediylbis(oxymethylen
e)]bis[oxirane] polymer.
P-16-0289........................... 4/1/2016 6/30/2016 CBI.................... (G) Extrusion compounding (G) Semi-aromatic
resin molding resin. polyamide.
P-16-0290........................... 4/1/2016 6/30/2016 CBI.................... (G) Fuel additive........... (G) Copolymer of maleic
acid and olefin.
P-16-0291........................... 4/3/2016 7/2/2016 CBI.................... (G) Curing agent............ (G) 1,3-
cyclohexanedimethanamine
adduct.
P-16-0292........................... 4/5/2016 7/4/2016 CBI.................... (S) Intermediate for use in (G) Depolymerized waste
the manufacture of polymers. plastics.
P-16-0293........................... 4/13/2016 7/12/2016 Charkit Chemical (S) Compounding of fragrance (S) Octanoic acid,
Corporation. for industrial cleaners/ phenylmethyl ester.
janitorial compounds,
detergents, etc.
P-16-0299........................... 4/20/2016 7/19/2016 CBI.................... (S) Reactive (meth)acrylate (G) Polyurethane,
oligomer for ultra violet methacrylate-blocked.
cured 3d printed parts.
P-16-0300........................... 4/6/2016 7/5/2016 H.B. Fuller Company.... (G) Industrial adhesive..... (G) Oxirane, 2-methyl-,
polymer with 1,3-xylylene
diisocyanate and oxirane,
3-(trimethoxysilyl)propyl
isocyanate.
P-16-0301........................... 4/6/2016 7/5/2016 CBI.................... (G) Intermediate............ (G) Propyl silsesquioxanes,
hydrogen-terminated.
P-16-0302........................... 4/6/2016 7/5/2016 CBI.................... (G) Plastic additive........ (G) Organic modified propyl
silsesquioxane.
P-16-0303........................... 4/7/2016 7/6/2016 CBI.................... (G) Use for the production (G) Alkyl methyacrylate
of acrylic resin for polymer with styrene,
waterborne exterior amino acrylate and acrylic
coatings composition. acid, ammonium salt.
P-16-0304........................... 4/7/2016 7/6/2016 CBI.................... (G) Industrial adhesive..... (G) Polyurea grease.
P-16-0305........................... 4/7/2016 7/6/2016 CBI.................... (G) Industrial Adhesive..... (G) Polyurea grease.
P-16-0307........................... 4/8/2016 7/7/2016 CBI.................... (G) Open non dispersive use. (G)
Heteropolycycliccarboxylic
acid, 1,3-dihydro-
disubstituted-, polymer
with 1,1'-methylenebis[4-
isocyanatobenzene],
reaction products with
silica.
P-16-0308........................... 4/8/2016 7/7/2016 Itaconix Corporation... (G) Reactive Monomer........ (S) Butanedioic acid, 2-
methylene-, 1,4-bis (2-
methylpropyl) ester.
[[Page 35354]]
P-16-0309........................... 4/8/2016 7/7/2016 CBI.................... (G) PMN substances are (G) Bisamide mixture.
intended for use as
rheological or thixotropic
agents used in the
production of solvent based
industrial coatings, high
solid aromatic paints,
adhesives, sealants, and
other types of paints and
topcoats.
P-16-0310........................... 4/8/2016 7/7/2016 CBI.................... (G) PMN substances are (G) Bisamide mixture.
intended for use as
rheological or thixotropic
agents used in the
production of solvent based
industrial coatings, high
solid aromatic paints,
adhesives, sealants, and
other types of paints and
topcoats.
P-16-0311........................... 4/8/2016 7/7/2016 CBI.................... (S) Coatings for wood metal (G) Aromatic dicarboxylic
and plastic. acid, polymer with alkyl
dicarcoxylic acid, alkyl
diol,
hydroxy(hydroxyalkyl)alkyl
carboxylic acid,
methylenebis(isocyanatocyc
loalkane) and
alkylethylidene
bis(phenyleneoxy)bis[alkyl
alcohol].
P-16-0312........................... 4/8/2016 7/7/2016 CBI.................... (S) Coatings for wood metal (G) Aromatic dicarboxylic
and plastic. acid, polymer with
cycloalkanemethanol,
alkanediamine, alkanedioic
acid, hydroxy-2-
(hydroxyalkyl)-2-
alkylcarboxylic acid,
methylenebis[isocyanatocyc
loalkane] and
[(methylethylidene)bis(phe
nyleneoxy)]bis[alkanol].
P-16-0313........................... 4/11/2016 7/10/2016 Honeyol, Inc........... (S) Use in production of (S) Tar acids (shale oil),
resins (raw material used c6-9-fraction,
in the production of alkylphenols, low-boiling.
resins).
P-16-0314........................... 4/11/2016 7/10/2016 Firmenich, Inc......... (G) As part of a fragrance (S) Ethanone, 1-(5-propyl-
formula. 1,3-benzodioxol-2-yl)-
P-16-0315........................... 4/11/2016 7/10/2016 CBI.................... (S) Industrial rubber (G) Alkyldiene, polymer,
formulation. terminated
alkoxysilylalkylcarbamate.
P-16-0316........................... 4/11/2016 7/10/2016 CBI.................... (G) Drilling chemical....... (G) Aliphatic polyester.
P-16-0317........................... 4/11/2016 7/10/2016 CBI.................... (G) Drilling chemical....... (G) Aliphatic polyester.
P-16-0322........................... 4/22/2016 7/21/2016 CBI.................... (G) Pulp bleaching catalyst. (G) Manganese cyclic
(tri)amine chloride
complex.
P-16-0322........................... 4/22/2016 7/21/2016 CBI.................... (G) Textile bleaching (G) Manganese cyclic
catalyst. (tri)amine chloride
complex.
P-16-0323........................... 4/13/2016 7/12/2016 Allnex USA, Inc........ (G) Coating resin........... (G) Alkylaldehyde, reaction
products with substituted
carbomonocycle-substituted
heteromonocycle-alkylene
glycol bis
[[[substituted(oxoneoalky)
oxy]alkyl]amino]alky]
ether polymer and alkyl
substituted alkanediamine,
acetate salts.
P-16-0324........................... 4/13/2016 7/12/2016 CBI.................... (G) Adhesive for open non- (G) Ultra violet-curable
descriptive use. urethane acrylate.
P-16-0325........................... 4/13/2016 7/12/2016 CBI.................... (G) Oil & Gas extraction.... (G) Polymer of substituted
acrylic acid and
bromohexane.
P-16-0326........................... 4/27/2016 7/26/2016 Firmenich, Inc......... (G) As part of a fragrance (S) Propanoic acid, 2,2-
formula. dimethyl-,1-methyl-2-(1-
methylethoxy)-2-oxoethyl
ester.
P-16-0327........................... 4/14/2016 7/13/2016 CBI.................... (G) Additive in rubber tires (G) Alkenoic acid, polymer
with alkylalkenoate,
sodium salt.
[[Page 35355]]
P-16-0328........................... 4/19/2016 7/18/2016 CBI.................... (G) Intermediate............ (G) Terephthalic acid,
polymer with
alkanepolycarboxylic
acids, alkanepolyols,
isophthalic acid,
polyetherpolyol, 1,1-
methylenebis[isocyanatoben
zene], phthalic anhydride
and a substituted
alkanepolyol.
P-16-0329........................... 4/19/2016 7/18/2016 CBI.................... (G) Adhesive component...... (G) Polymer of
alkanepolycarboxylic
acids, alkanepolyols,
isophthalic acid,
polyetherpolyols, 1,1-
methylenebis[isocyanatoben
zene], terephthalic acid,
phthalic anhydride and a
substituted alkanepolyol.
P-16-0330........................... 4/19/2016 7/18/2016 H.B. Fuller Company.... (G) Industrial adhesive..... (G) Hydroxy functional
triglyceride polymer with
glycerol mono-ester and
1,1'-methylenebis[4-
isocyanatobenzene].
P-16-0331........................... 4/19/2016 7/18/2016 H.B. Fuller Company.... (G) Industrial adhesive..... (G) Hydroxy functional
triglyceride polymer with
glycerol mono-ester and
1,1'-
methylenebis[isocyanatoben
zene].
P-16-0332........................... 4/21/2016 7/20/2016 CBI.................... (G) Component of coating.... (G) Carbomonocycle
phosphate metal salt.
P-16-0334........................... 4/22/2016 7/21/2016 Lamberti USA, Inc...... (G) Additive for industrial (G) Polymeric amide.
purposes.
P-16-0335........................... 4/22/2016 7/21/2016 Lamberti USA, Inc...... (G) Additive for industrial (G) Polymeric amide.
purposes.
P-16-0336........................... 4/22/2016 7/21/2016 CBI.................... (G) Fuel additive-- (G) Polyolefin ester.
destructive use.
P-16-0337........................... 4/25/2016 7/24/2016 CBI.................... (S) Monomer................. (G) Aliphatic acrylate.
P-16-0338........................... 4/26/2016 7/25/2016 CBI.................... (G) Dyestuff................ (G) Substituted xanthene
derivative.
P-16-0339........................... 4/26/2016 7/25/2016 CBI.................... (G) Dyestuff................ (G) Azo derivatives.
P-16-0340........................... 4/26/2016 7/25/2016 Solazyme, Inc.......... (G) Feedstock for (G) Glycerides, c8-18 and
oleochemical industry. c18 unsaturated, from
fermentation.
P-16-0340........................... 4/26/2016 7/25/2016 Solazyme, Inc.......... (G) Renewable oil source for (G) Glycerides, c8-18 and
fuels. c18 unsaturated, from
fermentation.
P-16-0341........................... 4/27/2016 7/26/2016 Perstorp Polyols....... (G) Elastomer............... (S) 2-oxepanone,
homopolymer, ester with
1,6-hexanediol.
P-16-0341........................... 4/27/2016 7/26/2016 Perstorp Polyols....... (S) Industrial coatings..... (S) 2-oxepanone,
homopolymer, ester with
1,6-hexanediol.
P-16-0341........................... 4/27/2016 7/26/2016 Perstorp Polyols....... (S) Adhesive components..... (S) 2-oxepanone,
homopolymer, ester with
1,6-hexanediol.
P-16-0342........................... 4/27/2016 7/26/2016 CBI.................... (S) Modified acrylic polymer (G) Modified acrylic
used as a dispersant for polymer.
deflocculation of pigments
in industrial paints and
coatings.
P-16-0343........................... 4/27/2016 7/26/2016 CBI.................... (S) Modified urethane (G) Modified urethane
polymer used as a polymer.
dispersant for
deflocculation of pigments
in industrial paints and
coatings.
P-16-0344........................... 4/27/2016 7/26/2016 CBI.................... (S) Modified acrylic polymer (G) Modified urethane
used as a dispersant for polymer.
deflocculation of pigments
in industrial paints and
coatings.
P-16-0345........................... 4/28/2016 7/27/2016 CBI.................... (G) Processing aid.......... (G) Acrylamide, polymer
with methacrylic acid
derivatives.
--------------------------------------------------------------------------------------------------------------------------------------------------------
For the 31 NOCs received by EPA during this period, Table 2
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.
[[Page 35356]]
Table 2--NOCs Received From April 1, 2016 to April 29, 2016
----------------------------------------------------------------------------------------------------------------
Projected date
Case No. Date received of Chemical identity
commencement
----------------------------------------------------------------------------------------------------------------
P-05-0522........................... 4/26/2016 3/31/2016 (S) [1,1'-biphenyl]-4-carboxaldehyde.
P-11-0243........................... 4/1/2016 3/12/2016 (G) Alkanedioic acid polymer with
alkanediol and diisocyanatohexane.
P-13-0670........................... 4/25/2016 4/4/2016 (G) Alkyl-[4-
(carbomonocyclesubstituted)carbomonocycle
]-(dialkyl-hydroxycarbomonocycle)alkane
derivative.
P-13-0671........................... 4/25/2016 4/4/2016 (G) Alkyl-[4-
(carbomonocyclesubstituted)carbomonocycle
]-(dialkyl-hydroxycarbomonocycle)alkane
derivative.
P-14-0166........................... 4/4/2016 3/3/2016 (G) Fatty acid amide.
P-14-0185........................... 4/4/2016 3/5/2016 (G) Fatty acid amide acetate.
P-14-0800........................... 4/22/2016 4/11/2016 (G) Solvent red 252.
P-15-0046........................... 4/12/2016 4/1/2016 (S) Propanol, oxybis, polymer with
bis(isocyanatomethyl)cyclohexane and
alpha-hydro-omega-hydroxypoly(oxy-1,4-
butanediyl).
P-15-0074........................... 4/8/2016 3/30/2016 (G) Trisiloxane alkoxylate.
P-15-0329........................... 4/12/2016 3/12/2016 (S) Urea, n, n``-1,6-hexanediylbis[n'-
[(1s)-1-phenylethyl]-.
P-15-0382........................... 4/29/2016 4/20/2016 (G) Polyitaconic acid, sodium zinc salt.
P-15-0409........................... 4/5/2016 3/24/2016 (G) Substituted alkanolamine ether.
P-15-0515........................... 4/19/2016 4/7/2016 (G) 2-propenoic acid, 2-methyl, methyl
ester, polymer with ethenylbenzene, ethyl
2-propenoate, 2-oxiranylmethyl 2-methyl-2-
propenoate and 1,2-propanediol mono(2-
methyl-2-propenoate), reaction products
with dialkylamine, carboxylate salt.
P-15-0567........................... 4/8/2016 3/10/2016 (S) Hexanedioic acid, polymer with 1,?6-
?hexanediol, 1,?3-?isobenzofurandione, 5-
?isocyanato-?1-?(isocyanatomethyl)?-
?1,?3,?3-?trimethylcyclohexane and
1,?2,?3-?propanetriol, 2-?hydroxyethyl
acrylate-?blocked.
P-15-0623........................... 4/18/2016 4/14/2016 (G) Fatty acids, polymers with bisphenol
a, nutshell liq., epichlorohydrin,
alkylenediamine, formaldehyde and
polyalkylenepolyamine.
P-15-0733........................... 4/4/2016 3/13/2016 (G) Alkane carboxylic acid, hydroxy,
hydroxyalkyl-alkyl, polymer with .alpha.-
hydro-.omega.-hydroxypoly(oxy-1,2-
ethanediyl) ether with alkyl-
(hydroxyalkyl)-alkanediol (x:1), .alpha.-
hydro-.omega.-hydroxypoly[oxy(alkyl-
alkyldiyl)] and alkylenebis
[isocyanatoalkane],-blocked.
P-15-0737........................... 4/12/2016 4/7/2016 (G) Diammonium salt of phosphate
methacrylate.
P-15-0737........................... 4/12/2016 4/7/2016 (G) Monoammonium salt of phosphate
methacrylate.
P-15-0769........................... 4/14/2016 4/4/2016 (G) Polyurethane silane.
P-16-0009........................... 4/1/2016 3/9/2016 (S) Fatty acids, castor-oil, esters with
polyethylene glycol ether with glycerol
(3:1).
P-16-0026........................... 4/11/2016 4/3/2016 (G) Amine functional epoxy, organic acid
salt.
P-16-0100........................... 4/5/2016 3/23/2016 (G) Substituted heteropolycyclic derivs.
P-16-0107........................... 4/14/2016 3/27/2016 (G) Aromatic polycarboxylic acid, polymer
with alkyldiol, alkylidioic acid,
aromatic polyisocyanate, substituted
alkyldiol, compd. with alkylamine.
P-16-0108........................... 4/28/2016 3/17/2016 (G) Carbonic acid, polymer with, 5-
isocyanato-1-(isocyanatomethyl)- 1,3,3-
trimethylcyclohexane, 2-hydroxyethyl
acrylate-blocked.
P-16-0115........................... 4/6/2016 3/27/2016 (G) 2-propanediol, polymer with 2-
ethyloxirane, oxirane and cycloaliphatic
anhydride, polymer with 2,2???-[(1-
methylethylidene)bis(4,1-
phenyleneoxymethylene)]bis[oxirane].
P-16-0121........................... 4/18/2016 4/13/2016 (G) Acrylic acid polymer with polyethylene
glycol.
P-16-0142........................... 4/26/2016 4/20/2016 (G) Amine salted polyacrylate.
P-16-0149........................... 4/18/2016 4/15/2016 (G) 2-alkenoic acid, alkyl ester, polymer
with ethenyl benzene, alkyl 2-alky
alkenoate and alkene carboxylic acid.
P-16-0159........................... 4/25/2016 3/31/2016 (G) Hexasodium 5-{4-[3-(8-benzoylamino-1-
hydroxy-3,6-disulfonatonaphthalene-2-
yldiazenyl)-4-sulfonatoanilino]-6-(2-
sulfonatoethylamino)-1,3,5-triazine-2-
ylamino{time} benzene-1,3-dicarboxylate.
P-16-0174........................... 4/29/2016 4/19/2016 (S) Butanedioic acid, 2-methylene-,
telomer with phosphinic acid and sodium 4-
ethenylbenzenesulfonate (1:1), sodium
salt.
P-16-0175........................... 4/28/2016 4/18/2016 (S) Naphthalene, eicosyl-.
----------------------------------------------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: May 25, 2016.
Pamela Myrick,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2016-13028 Filed 6-1-16; 8:45 am]
BILLING CODE 6560-50-P