[Federal Register Volume 81, Number 146 (Friday, July 29, 2016)]
[Notices]
[Pages 49976-49981]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-18015]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2016-0025; FRL-9949-63]
Certain New Chemicals; Receipt and Status Information for June
2016
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
Premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from June 1, 2016 to June 30, 2016.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before August 29, 2016.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2016-2016-0025, and the specific PMN number or
TME number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at http://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at http://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW.,
Washington, DC 20460-0001; telephone number: 202-564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. What action is the agency taking?
This document provides receipt and status reports, which cover the
period from June 1, 2016 to June 30, 2016, and consists of the PMNs and
TMEs both pending and/or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. What is the agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
[[Page 49977]]
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 60 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; The
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the potential
uses identified by the manufacturer/importer in the PMN; and the
chemical identity.
Table 1--PMNs Received From June 1, 2016 to June 30, 2016
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer importer Use Chemical
date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-16-0273............................ 6/13/2016 9/11/2016 CBI..................... (G) Ingredient in metal (G) Alkyl heteromonocycle,
working fluids. polymer with
heteromonocycle,
carboxyalkyl alkyl ether.
P-16-0345............................ 6/13/2016 9/11/2016 CBI..................... (G) Processing aid...... (G) Acrylamide, polymer with
methacrylic acid
derivatives.
P-16-0377............................ 6/2/2016 8/31/2016 CBI..................... (G) Film component...... (G) Polyester polyol.
P-16-0380............................ 6/2/2016 8/31/2016 CBI..................... (G) Component in (G) Formic acid, compounds
electrocoat resin. (compds.) with hydrolyzed
bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1,3-
dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products acetates
(salts).
P-16-0380............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Formic acid, compds. with
for automotive hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products acetates
(salts).
P-16-0381............................ 6/2/2016 8/31/2016 CBI..................... (G) Component in (G) Propanoic acid, 2-hydroxy-
electrocoat resin. , compds. with hydrolyzed
bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1,3-
dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products formates
(salts).
P-16-0381............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Propanoic acid, 2-hydroxy-
for automotive , compds. with hydrolyzed
electrocoat resin. bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1, 3-
dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products formates
(salts).
P-16-0382............................ 6/2/2016 8/31/2016 CBI..................... (G) Component in (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-
epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products
sulfamates(salts).
P-16-0382............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Formic acid, compds. with
for automotive hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products sulfamates
(salts).
P-16-0383............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Formic acid, compds. with
for automotive hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products acetates
(salts).
[[Page 49978]]
P-16-0384............................ 6/2/2016 8/31/2016 CBI..................... (G) Component of (G) Propanoic acid, 2-hydroxy-
electrocoat resin. , compds. with hydrolyzed
bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1,3-
dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products formates
(salts).
P-16-0384............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Propanoic acid, 2-hydroxy-
for automotive , compds. with hydrolyzed
electrocoat resin. bisphenol a-epichlorohydrin-
polyethylene glycol ether
with bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1,3-
dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products formates
(salts).
P-16-0385............................ 6/2/2016 8/31/2016 CBI..................... (G) Component in (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-
epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products
sulfamates(salts).
P-16-0385............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Formic acid, compds. with
for automotive hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene
glycol ether with bisphenol
a (2:1) polymer-N1-(1,3-
dimethylbutylidene)-N2-[2-
[(1, 3-
dimethylbutylidene)amino]eth
yl]-1,2-ethanediamine-
dialdehyde-2-
(methylamino)ethanol
reaction products
sulfamates(salts).
P-16-0394............................ 6/7/2016 9/5/2016 CBI..................... (G) Adhesive............ (G) Benzenedicarboxylic acid,
polymer with decanedioic
acid and dodecanedioic acid,
ethanediol, hexanedioic
acid, hexanediol, alpha-
hydro-omega-
hydroxypoly[oxy(methyl-1,2-
ethanediyl)],
isobenzofurandione,1,1'-
methylenebis[4-
isocyanatobenzene], phenol
and trimethylbicyclo hept-2-
ene.
P-16-0395............................ 6/2/2016 8/31/2016 CBI..................... (S) Polymeric (G) Methacrylic acid, polymer
intermediate for the with alkyl methacrylates and
production of acrylic substituted acrylamide,
polymers for industrial ammonium salt.
coatings.
P-16-0396............................ 6/2/2016 8/31/2016 CBI..................... (G) Specialty chemical (G) Alkylaminium hydroxide.
for processing additive.
P-16-0398............................ 6/6/2016 9/4/2016 CBI..................... (G) Corrosion inhibitor. (G) Di-ammonium di-
carboxylate.
P-16-0399............................ 6/17/2016 9/15/2016 Tryeco Llc.............. (S) Agricultural soil (S) Starch, polymer with 2-
amendment for filed propenoic acid, potassium
crops seed coating and salt. oxidized.
turf.
P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Use in cured (S) Alkanes, C11 16-branched
coatings. and linear.
P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Agrochemical........ (S) Alkanes, C11 16-branched
and linear.
P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Metalworking fluid (S) Alkanes, C11 16-branched
use. and linear.
P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Use in cleaning (S) Alkanes, C11 16-branched
fluids. and linear.
P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Chemical............ (S) Alkanes, C11 16-branched
intermediate............ and linear.
P-16-0402............................ 6/7/2016 9/5/2016 CBI..................... (S) Flotation additive (G) Propanediamine,
for use in mineral [(isoalkyloxy)propyl]
processing. derivs., salts.
P-16-0403............................ 6/15/2016 9/13/2016 CBI..................... (G) Open non dispersive (G) Heteropolycyclic
use. carboxylic acid, polymer
with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol and 4-
substitutedbenzene,
substituted carbomonocycle-
and alkyl-substituted
carbomonocycle-blocked.
[[Page 49979]]
P-16-0404............................ 6/8/2016 9/6/2016 CBI..................... (G) A colorant for (G) Alkyl ester, 2-({4-[2-
dyeing various (trisubstituted phenyl)azo]-
synthetic fibers and 5-acetamido-2-
fabrics open, non- substitutedphenyl{time} (sub
dispersive use. stituted alkoxy)amino).
P-16-0406............................ 6/9/2016 9/7/2016 CBI..................... (G) Coating............. (G) Functionalized polyimide.
P-16-0407............................ 6/9/2016 9/7/2016 CBI..................... (G) Coating............. (G) Functionalized polyamide.
P-16-0408............................ 6/9/2016 9/7/2016 CBI..................... (G) A Colorant for (G) 3-pyridinecarbonitrile,
dyeing various 1,2-dihydro-trisubstituted-5-
synthetic fibers and [2-(disubstituted
fabrics open non- phenyl)azo]-2-oxo.
dispersive use.
P-16-0409............................ 6/15/2016 9/13/2016 CBI..................... (G) Chemical (G) Alkylphenol.
intermediate for the
synthesis of another
substance.
P-16-0410............................ 6/14/2016 9/12/2016 CBI..................... (G) Automotive engine (G) Silicophosphonate--sodium
fluid additive. silicate.
P-16-0411............................ 6/13/2016 9/11/2016 CBI..................... (G) Crosslinking agent.. (G) Substituted polyalkylene
polycarbomonocyclic ester,
polymer with polyalkylene
glycol, alkoxyalkanol
blocked.
P-16-0412............................ 6/13/2016 9/11/2016 Cardolite Corporation... (G) Epoxy coating....... (G) Cashew, nutshell liquid,
polymer with amine and
formaldehyde.
P-16-0413............................ 6/13/2016 9/11/2016 Siltech Llc............. (S) Anti-fingerprint (S) Siloxanes and silicones,
material for a metal di-me, 3-hydroxypropyl me,
coating application. me 3,3,4,4,5,5,6,6,6-
nonafluorohexyl.
P-16-0415............................ 6/17/2016 9/15/2016 CBI..................... (G) Coating for oil and (G) Polyurethane.
gas industry.
P-16-0417............................ 6/16/2016 9/14/2016 CBI..................... (G) Adhesive for open, (G) Isocyanate terminated
non-descriptive use. polyurethane resin.
P-16-0418............................ 6/15/2016 9/13/2016 CBI..................... (G) A colorant for (G) 6-(disubstituted-phenyl
dyeing various azo)-4,7-disubstituted-
synthetic fibers and quinolinepropanoic acid,
fabrics open, non- alkyl ester.
dispersive use.
P-16-0419............................ 6/15/2016 9/13/2016 CBI..................... (G) Use as intermediate. (G) N-alkyl-
dialkylpiperidine.
P-16-0420............................ 6/21/2016 9/19/2016 CBI..................... (S) The notified (G) Dimethyl cyclohexenyl
substance will be used propanol.
as a fragrance
ingredient being
blended (mixed) with
other fragrance
ingredients to make
fragrance oils that
will be sold to
industrial and
commercial customers
for their incorporation
into soaps, detergents,
cleaners and other
similar household and
consumer products.
P-16-0421............................ 6/16/2016 9/14/2016 Guardian Industries Corp (S) Additive to (S) Flue dust, glass
facilitate melting of manufacturing
sand during manufacture desulfurizationdefinition:
of glass. The dust produced from the
flue gas exhaust cleaning of
a glass manufacturing
process using carbonate
containing substances. it
consists primarily of
na2so4, na2co3, and
na4(so4)(co3).
P-16-0422............................ 6/21/2016 9/19/2016 CBI..................... (G) Additive for (S) 1,2-
polymers. cyclohexanedicarboxylic
acid, 1-(phenylmethyl)
ester, ester with 2,2,4-
trimethyl-1,3-pentanediol
mono(2-methylpropanoate).
P-16-0423............................ 6/17/2016 9/15/2016 CBI..................... (G) Intermediate........ (G) Tetraalkylpiperidinium
halide.
P-16-0424............................ 6/17/2016 9/15/2016 CBI..................... (G) Directing agent..... (G) Tetraalkylpiperidinium
hydroxide.
[[Page 49980]]
P-16-0425............................ 6/22/2016 9/20/2016 CBI..................... (G) A chemical reactant (G) Amino-silane.
used in manufacturing a
polymer.
P-16-0428............................ 6/20/2016 9/18/2016 Cardolite Corporation... (S) Industrial.......... (G) Phenol, formaldehyde and
amine.
P-16-0429............................ 6/20/2016 9/18/2016 CBI..................... (G) Universal tint paste (G) Endcapped polysiloxane.
resin having high
solids.
P-16-0430............................ 6/21/2016 9/19/2016 CBI..................... (G) Filler.............. (S) Pentanedioic acid, 2-
methyl-.
P-16-0432............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine
flotation products used acetates.
in ore processing.
P-16-0433............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine
flotation products used acetates.
in ore processing.
P-16-0434............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine
flotation products used acetates.
in ore processing.
P-16-0435............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine
flotation products used acetates.
in ore processing.
P-16-0436............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine
flotation products used acetates.
in ore processing.
P-16-0437............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine
flotation products used acetates.
in ore processing.
P-16-0441............................ 6/23/2016 9/21/2016 CBI..................... (G) Oilfield additive... (G) Formaldehyde, reaction
products with amine-
alkylamine reaction products
ether amine derivs.
residues.
P-16-0446............................ 6/24/2016 9/22/2016 Allnex USA Inc.......... (S) Resin in (G) Fatty acids, reaction
architectural primer products with alkylamine,
coatings. polymers with substituted
carbomonocycle, substituted
alkylamines, heteromonocycle
and substituted alkanoate,
lactates (salts).
P-16-0447............................ 6/24/2016 9/22/2016 CBI..................... (G) Additive for (G) Alkyl alkenoate, dialkyl
coatings. alkanediyl, polymer with
alkyl alkenoate, substituted
carbomonocycle, alkyl
alkenoate and
heteromonocycle alkyl
alkenoate, diazene bis alkyl
heteromonocycle initiated.
P-16-0448............................ 6/27/2016 9/25/2016 CBI..................... (G) Oil additive........ (G) Metal salts branched
alkyl substituted
carbomonocycle with
substituted alkyl
carbomonocycle complexes.
P-16-0449............................ 6/27/2016 9/25/2016 CBI..................... (S) Use per FFDCA (S) 2,7-decadienal, (2e,7z)-.
cosmetics.
P-16-0449............................ 6/27/2016 9/25/2016 CBI..................... (S) Use per TSCA (S) 2,7-decadienal, (2e,7z)-.
fragrance uses scented
papers detergents
candles etc.
P-16-0453............................ 6/29/2016 9/27/2016 Miwon North America, (S) Resin for industrial (G) Polyester acrylate.
Inc.. coating.
P-16-0454............................ 6/30/2016 9/28/2016 CBI..................... (G) Material for highly (G) Trisubstituted alkenol.
dispersive use in
consumer products.
--------------------------------------------------------------------------------------------------------------------------------------------------------
For the 1 TME received by EPA during this period, Table 2 provides
the following information (to the extent that such information is not
claimed as CBI): The EPA case number assigned to the TME, the date the
TME was received by EPA, the projected end date for EPA's review of the
TME, the submitting manufacturer/importer, the potential uses
identified by the manufacturer/importer in the TME, and the chemical
identity.
Table 2--TME Received From June 1, 2016 to June 30, 2016
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacter importer Use Chemical
date
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-16-0017............................ 5/25/2016 7/9/2016 CBI..................... (G) Wax................. (G) Modified vegetable oil.
--------------------------------------------------------------------------------------------------------------------------------------------------------
[[Page 49981]]
For the 23 NOCs received by EPA during this period, Table 3
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.
Table 3--NOCs Received From June 1, 2016 to June 30, 2016
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date date Chemical
----------------------------------------------------------------------------------------------------------------
J-14-0001............................... 6/7/2016 3/13/2014 (G) Saccharomyces cerevisiae,
modified.
P-01-0309............................... 6/17/2016 6/1/2016 (S) Undecanedioic acid, compd. with 2-
(2-aminoethoxy)ethanol.
P-12-0121............................... 6/23/2016 5/25/2016 (S) Acetic acid, 1, 1'-anhydride,
reaction products with borax and
hydrogen peroxide.
P-13-0930............................... 6/13/2016 5/24/2016 (G) Substituted phenol.
P-14-0478............................... 6/23/2016 4/8/2016 (S) Carbonic acid, dimethyl ester,
polymer with 1,4-diisocyanatobenzene,
1,6-hexanediol and 1,5-pentanediol.
P-14-0860............................... 6/9/2016 5/9/2016 (G) Benzophenonetetracarboxylic
dianhydride-methylenediphenylene
isocyanate-toluene diisocyanate
copolymer.
P-15-0121............................... 6/7/2016 6/2/2016 (S) Formaldehyde, polymer with 2-
aminocyclopentanemethanamine, 1,4-
butanediamine, 1,2-
cyclohexanediamine, 1,6-
hexanediamine, hexahydro-1h-azepine
and 2-methyl-1,5,-pentanediamine.
P-15-0703............................... 6/15/2016 5/28/2016 (S) 2-propenoic acid, 2-methyl-, 2-
(diethylamino)ethyl ester, polymer
with butyl 2-propenoate and methyl 2-
methyl-2-propenoate, compd. with
methyl 4-methylbenzenesulfonate.
P-16-0022............................... 6/3/2016 6/3/2016 (S) C10-C20 neo fatty acids.
P-16-0101............................... 6/9/2016 6/8/2016 (G) Disubstituted benzene alkanal.
P-16-0159............................... 6/9/2016 3/31/2016 (G) Substituted polyaromatic sodium
dicarboxylate.
P-16-0173............................... 6/23/2016 6/6/2016 (G) Aminoalkyl alaninate sodium salt
(1:1), polymer with alkyldiol,
dialkyl-alkanediol, alkyldioic acid,
alkyldiol, polyol, cycloaliphatic
diisocyanate, polyalkylene glycol
mono-alkyl ether-blocked.
P-16-0200............................... 6/14/2016 6/7/2016 (S) 1-propanone, 1-[1,1'-biphenyl]-4-
yl-2-methyl-2-(4-morpholinyl)-
P-16-0201............................... 6/6/2016 5/22/2016 (S) Oxirane, 2-methyl-, polymer with
alpha-hydro-omega-hydroxy-
poly[oxy(methyl-1,2-ethanediyl)], 5-
isocyanato-1-(isocyanatomethyl)-1,3,3-
trimethyl cyclohexane, oxirane and 2-
[[3-
(triethoxysilyl)propoxy]methyl]oxiran
e, poly ethylenepolypropylene glycol
mono-bu ether monoether with
propylene oxide-2-[[3-(tri
ethoxysilyl)propoxy]methyl] oxirane
polymer- and polypropylene glycol
mono-bu ether-blocked.
P-16-0203............................... 6/2/2016 5/22/2016 (G) Pentanedioic acid, compd. with
polyalkylpolyamine.
P-16-0208............................... 6/6/2016 5/23/2016 (S) Carbon, calcination products with
sulfur.
P-16-0222............................... 6/27/2016 6/26/2016 (G) Alkanedioic acid, polymer with
substituted heteromonocycle,
[acirc]-hydro-
[atilde][iquest][acirc]-
hydroxypoly(oxy-1,2-ethanediyl) ether
with substituted alkanediol and
substituted. bis[carbomonocycle],
alkanoate.
P-16-0223............................... 6/10/2016 6/2/2016 (G) Wax.
P-16-0227............................... 6/10/2016 6/8/2016 (G) Cashew nutshell liquid, polymer
with diisocyanatoalkane, substituted-
polyoxyalkyldiol, hydroxy-terminated
.polybutadiene and 4,4'-(1-
methylethylidene)bis[2-(2-propen-1-
yl)phenol].
P-16-0228............................... 6/21/2016 6/6/2016 (G) Derivative of a glycerol, alkanoic
acid and mixed fatty acids polymer.
P-16-0235............................... 6/6/2016 5/31/2016 (G) Polymeric methylene
diphenyldiisocyanate, polymer with
oxyalkyl diol, methacrylate blocked.
P-16-0250............................... 6/24/2016 6/24/2016 (G) Substituted carbomonocycle,
polymer with substituted alkanediol,
alkanedioic acid, alkanediol,
substituted alkanoic acid and
substituted carbomonocycle, compd.
with substituted alkane.
P-16-0267............................... 6/22/2016 6/19/2016 (G) Fatty acids, reaction products
with alkylamine, polymers with
substituted carbomonocycle,
substituted alkylamines,
heteromonocycle and substituted
alkanoate, lactates (salts).
----------------------------------------------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: July 25, 2016.
Megan Carroll,
Acting Information Management Division, Office of Pollution Prevention
and Toxics.
[FR Doc. 2016-18015 Filed 7-28-16; 8:45 am]
BILLING CODE 6560-50-P