[Federal Register Volume 81, Number 238 (Monday, December 12, 2016)]
[Notices]
[Pages 89433-89434]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-29614]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
Application(s) for Duty-Free Entry of Scientific Instruments
Pursuant to Section 6(c) of the Educational, Scientific and
Cultural Materials Importation Act of 1966 (Pub. L. 89-651, as amended
by Pub. L. 106-36; 80 Stat. 897; 15 CFR part 301), we invite comments
on the question of whether instruments of equivalent scientific value,
for the purposes for which the instruments shown below are intended to
be used, are being manufactured in the United States.
Comments must comply with 15 CFR 301.5(a)(3) and (4) of the
regulations and be postmarked on or before January 3, 2017. Address
written comments to Statutory Import Programs Staff, Room 3720, U.S.
Department of Commerce, Washington, DC 20230. Applications may be
examined between 8:30 a.m. and 5:00 p.m. at the U.S. Department of
Commerce in Room 3720.
Docket Number: 16-017. Applicant: California Institute of
Technology, 1200 E. California Blvd., Pasadena, CA 91125. Instrument:
Photonic Professional GT 3D laser Lithography System. Manufacturer:
Nanoscribe GmbH, Germany. Intended Use: The instrument will be used to
develop structural meta-materials that are mechanically robust and
multi-functional. The instrument allows the fabrication of 3-
dimensional architectures out of polymer, with dimensions on the order
of nanometers. There is no other instrument capable of resolving
features down to that size because to attain such resolution it is
necessary to have the two-photon laser capability. Justification for
Duty-Free Entry: There are no instruments of the same general category
manufactured in the United States. Application accepted by Commissioner
of Customs: October 28, 2016.
Docket Number: 16-018. Applicant: UChicago Argonne, 9700 S. Cass
Avenue, Lemont, IL 60439. Instrument: Electron Microscope.
Manufacturer: FEI Company, Czech Republic. Intended
[[Page 89434]]
Use: The instrument will be used for research including studies of the
morphology, grain structure and defect structure in modern structural
materials. Justification for Duty-Free Entry: There are no instruments
of the same general category manufactured in the United States.
Application accepted by Commissioner of Customs: October 31, 2016.
Docket Number: 16-019. Applicant: University of Nebraska--Lincoln,
1700 Y St., Lincoln, NE 68588. Instrument: Electron Microscope.
Manufacturer: Elmitec, Germany. Intended Use: The instrument will be
used to research the synthesis and properties of novel nanomaterials,
using the interaction of an electron beam with the surface of materials
to image the surface with very high (nanometer scale) resolution,
independent of temperature (in the range from ~-100 C to well over 1000
C) and in the presence of different gases and vapors. Justification for
Duty-Free Entry: There are no instruments of the same general category
manufactured in the United States. Application accepted by Commissioner
of Customs: November 4, 2016.
Docket Number: 16-020. Applicant: Lafayette College, 730 High
Street, Easton, PA 18042. Instrument: High Power Q-Switched Diode-
Pumped Solid State Laser. Manufacturer: EdgeWave GMBH, Germany.
Intended Use: The instrument will be used to study time-dependent
finite chemical rate and mixing effects in turbulent combustion and the
investigation of coherent structures in turbulent boundary layers. The
instrument is approximately 10 times more powerful than any other high-
repetition diode-pumped solid state available from a U.S. manufacturer.
Techniques to be performed include Planar Laser Induced Fluorescence
imaging, exploiting the high-repetition rate and tenability features of
the instrument. Justification for Duty-Free Entry: There are no
instruments of the same general category manufactured in the United
States. Application accepted by Commissioner of Customs: November 4,
2016.
Docket Number: 16-022. Applicant: Regents of the University of
Colorado, 1800 Grant St., Denver, CO 80203. Instrument: Electron
Microscope. Manufacturer: FEI Company, Brno Czech Republic. Intended
Use: The instrument will be used to research the structural basis for
macromolecular function in both healthy and diseased cells.
Justification for Duty-Free Entry: There are no instruments of the same
general category manufactured in the United States. Application
accepted by Commissioner of Customs: November 4, 2016.
Dated: December 5, 2016.
Gregory W. Campbell,
Director of Subsidies Enforcement, Enforcement and Compliance.
[FR Doc. 2016-29614 Filed 12-9-16; 8:45 am]
BILLING CODE 3510-DS-P