[Federal Register Volume 83, Number 169 (Thursday, August 30, 2018)]
[Rules and Regulations]
[Pages 44216-44228]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-18849]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Part 774
[Docket No. 170906871-7871-01]
RIN 0694-AH46
Revisions to the Export Administration Regulations Based on the
2017 Missile Technology Control Regime Plenary Agreements
AGENCY: Bureau of Industry and Security, Commerce.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The Bureau of Industry and Security (BIS) is amending the
Export Administration Regulations (EAR) to reflect changes to the
Missile Technology Control Regime (MTCR) Annex that were agreed to by
MTCR member countries at the October 2017 Plenary in Dublin, Ireland,
and the May 2017 Technical Experts Meeting (TEM) in Stockholm, Sweden.
This final rule revises seventeen Export Control Classification Numbers
(ECCNs) to implement the changes that were agreed to at the meetings
and to better align the missile technology (MT) controls on the
Commerce Control List (CCL) with the MTCR Annex.
DATES: This rule is effective August 30, 2018.
FOR FURTHER INFORMATION CONTACT: Sharon Bragonje, Nuclear and Missile
Technology Controls Division, Bureau of Industry and Security, Phone:
(202) 482-0434; Email: [email protected].
SUPPLEMENTARY INFORMATION:
Background
The Missile Technology Control Regime (MTCR or Regime) is an export
control arrangement among 35 nations, including most of the world's
suppliers of advanced missiles and missile-related equipment,
materials, software and technology. The regime establishes a common
list of controlled items (the Annex) and a common export control policy
(the Guidelines) that member countries implement in accordance with
their national export controls. The MTCR seeks to limit the risk of
proliferation of weapons of mass destruction by controlling exports of
goods and technologies that could make a contribution to delivery
systems (other than manned aircraft) for such weapons.
In 1993, the MTCR's original focus on missiles for nuclear weapons
delivery was expanded to include the proliferation of missiles for the
delivery of all types of weapons of mass destruction (WMD), i.e.,
nuclear, chemical and biological weapons. Such proliferation has been
identified as a threat to international peace and security. One way to
address this threat is to maintain vigilance over the transfer of
missile equipment, material, and related technologies usable for
systems capable of delivering WMD. MTCR members voluntarily pledge to
adopt the Regime's export Guidelines and to restrict the export of
items contained in the Regime's Annex. The Regime's Guidelines are
implemented through the national export control laws, regulations and
policies of the regime members.
Amendments to the Export Administration Regulations (EAR)
This final rule revises the Export Administration Regulations (EAR)
to reflect changes to the MTCR Annex agreed to at the October 2017
Plenary in Dublin, Ireland, and changes resulting from the May 2017
Technical Experts Meeting (TEM) in Stockholm, Sweden. References are
provided below for the MTCR Annex changes agreed to at the meetings
that correspond to the EAR revisions described below. This rule also
makes changes to the Commerce Control List (CCL) (Supplement No. 1 to
part 774 of the EAR) to conform with the MTCR Annex. All of the changes
in this final rule align the MT controls on the CCL with the MTCR
Annex. In the discussion below, BIS identifies the origin of each
change in the regulatory text of this final rule by using one the
following parenthetical phrases: (Dublin 2017 Plenary), (Stockholm 2017
TEM), or (Changes to Align with MTCR Annex).
Amendments to the Commerce Control List (CCL)
This final rule amends the CCL to reflect changes to the MTCR Annex
by amending seventeen ECCNs, as follows:
ECCN 1B117. This final rule amends ECCN 1B117 by revising the
heading to remove the criteria for which ``batch mixers'' are
controlled under this entry and moves the criteria to the new ``items''
paragraphs a and b in the List of Items Controlled section. This final
rule, as a conforming change, redesignates existing ``items''
paragraphs a and b as paragraphs c and d (including redesignating the
Note to paragraph b as Note to paragraph d), respectively, so that all
criteria that identify ``batch mixers'' that are controlled under ECCN
1B117 are in the List of Items Controlled section. These changes
involving the rearranging of the existing text are being made for
clarity and consistency within the MTCR Annex (MTCR Annex Change,
Category II: Item 4.B.3., Dublin 2017 Plenary). These changes are not
expected to have any impact on the number of license applications
received by BIS.
ECCN 1B118. This final rule amends ECCN 1B118 by revising the
heading to remove the criteria for which ``continuous mixers'' are
controlled under 1B118 and adds those criteria to the ``items''
paragraph in the List of Items Controlled section. This final rule
revises ``items'' paragraphs a and b to include the control criteria
that identify certain ``continuous mixers'' that are controlled under
ECCN 1B118. This final rule, as a conforming change, also redesignates
existing ``items'' paragraph b as paragraph c, which includes criteria
that identify other ``continuous mixers'' that are controlled under
ECCN 1B118. The changes to paragraph b, which this rule redesignates as
``items'' paragraph c.2, include making minor edits for clarity of the
control parameters to more clearly identify the shafts controlled (MTCR
Annex Change, Category II: Item 4.B.3.a., Dublin 2017 Plenary). These
changes involving the rearranging of the existing text are being made
for clarity and consistency within the MTCR Annex. These changes are
not expected to have any impact on the number of license applications
received by BIS.
ECCN 1C111. This final rule amends ECCN 1C111 by revising ``items''
paragraph a.1 in the List of Items Controlled section. In ``items''
paragraph a.1, this final rule removes the word ``percent'' and adds in
its place the ``%'' sign in the phrase ``if at least 10 percent of the
total weight.'' This change is being made for consistency with the MTCR
Annex (Changes to Align with MTCR Annex). This is a clarification and
will not change any scope of control. This change is not expected to
have any impact on the number of license applications received by BIS.
[[Page 44217]]
ECCN 1C118. This final rule amends ECCN 1C118 by revising ``items''
paragraphs a.1, a.2, and a.3 in the List of Items Controlled section.
In ``items'' paragraphs a.1 and a.2, this final rule removes the phrase
``weight percent'' and adds in its place the phrase ``% by weight.'' In
``items'' paragraph a.3, this final rule removes the phrase ``percent
is austenite'' and adds in its place the ``%'' sign and for clarity
moves the phrase ``is austenite'' to the end of the paragraph. These
changes involving the rearranging of the existing text are being made
for clarity and consistency with the MTCR Annex (MTCR Annex Change,
Category II: Item 6.C.9., Dublin 2017 Plenary). This is a clarification
and will not change any scope of control. These changes are not
expected to have any impact on the number of license applications
received by BIS.
ECCN 2B109. This final rule amends ECCN 2B109 by revising the
heading, revising ``items'' paragraphs a and b in the List of Items
Controlled section, and removing Technical Note 2 in the List of Items
Controlled section. This final rule revises the introductory text of
``items'' paragraph a to incorporate the text from Technical Note 2
into the paragraph, creating positive and specific control text to
identify the types of ``flow-forming machines'' that are controlled
under ECCN 2B109. Only ``flow-forming machines'' that are usable in the
``production'' of propulsion components and equipment (e.g., motor
cases and interstages) for ``missiles'' will be controlled under ECCN
2B109. This rule includes a parenthetical phrase to provide two
examples of the types of propulsion components and equipment being
referenced in ECCN 2B109.a. This final rule also revises ``items''
paragraphs a.1 and a.2 to make minor clarifications in the control
parameters. This final rule revises ``items'' paragraph a.1 to add the
phrase ``equipped with or'' according to the manufacturer's technical
specification, and removes the phrase ``can be'' and adds in its places
the phrase ``capable of being'' equipped. This final rule removes the
word ``have'' from the beginning of ``items'' paragraph a.2 because the
introductory text of paragraph a already includes this word, so it is
redundant in a.2. The final rule removes Technical Note 2 because the
substance of this technical note is added to ``items'' paragraph a,
which means the technical note is no longer needed. This final rule
rewords the substance of Technical Note 2 added to the introductory
text of ``items'' paragraph a for clarity and to remove the double
negative (MTCR Annex Change, Category II: Item 3.B.3., Dublin 2017
Plenary).
In ECCN 2B109, this final rule revises the heading by removing the
phrase ``and ``specially designed'' ``parts'' and ``components''
therefor.'' As a conforming change this final rule revises ``items''
paragraph b to add ``parts'' to the scope of this paragraph. These
changes to the heading and ``items'' paragraph b do not change the
scope of the ECCN, but rather clarify the intended scope of ECCN 2B109.
This final rule corrects ``items'' paragraph b, so that an MT control
on ``parts'' and ``components'' applies only to 2B009 machines that are
controlled for MT reasons. The control text in the heading referring to
``parts'' and ``components'' is not needed, provided conforming edits
were made to add ``parts'' to the scope of ``items'' paragraph b, which
controlled ``components'' prior to publication of this final rule. This
final rule also revises the heading to add the phrase ``as follows (see
List of Items Controlled)'' to reflect that this ECCN includes an
``items'' paragraph (Changes to Align with MTCR Annex). These changes
are not expected to have any impact on the number of license
applications received by BIS.
ECCN 2B120. This final rule amends the heading of ECCN 2B120 by
revising ``items'' paragraph a in the List of Items Controlled section
to move the phrase ``or more'' to precede the term ``axes.'' The phrase
``two or more axes'' is clearer and more consistent within the MTCR
Annex. The motion simulators and rate tables controlled under ``items''
paragraph a are those with two or more axes (MTCR Annex Change,
Category I: Item 9.B.2.c, Dublin 2017 Plenary). These changes are not
expected to have any impact on the number of license applications
received by BIS.
ECCN 2B121. Similar to the change described above to ECCN 2B120,
this final rule amends ECCN 2B121 by revising ``items'' paragraph a in
the List of Items Controlled section to move the phrase ``or more'' to
precede the term ``axes.'' The phrase ``two or more axes'' is clearer
and more consistent within the MTCR Annex. The positioning tables
controlled under ``items'' paragraph a are those with two or more axes
(MTCR Annex Change, Category II: Item 9.B.2.d., Dublin 2017 Plenary).
These changes are not expected to have any impact on the number of
license applications received by BIS.
ECCN 2B122. This final rule amends ECCN 2B122 by revising the
heading to remove the word ``above'' and add in its place the phrase
``greater than'' to clarify that centrifuges capable of imparting
accelerations ``greater than'' 100 g are those that meet this portion
of the control parameter. The word ``above'' also conveys the same
meaning, but the phrase ``greater than'' is clearer and more consistent
within the MTCR Annex (MTCR Annex Change, Category II: Item 9.B.2.e.,
Dublin 2017 Plenary). These changes are not expected to have any impact
on the number of license applications received by BIS.
ECCN 6A107. This final rule amends ECCN 6A107 by adding a
definition of 'Time to steady-state registration' to the Related
Definitions paragraph in the List of Items Controlled section. As a
conforming change, this final rule also revises the ``items'' paragraph
a.2 in the List of Items Controlled section of ECCN 6A107 to add single
quotation marks around the term 'time to steady-state registration' to
indicate the term is defined for purposes of this ECCN under the
Related Definitions paragraph (MTCR Annex Change, Category II: Item
12.A.3.a.2. Technical Note, Stockholm 2017 TEM). These changes are not
expected to have any impact on the number of license applications
received by BIS.
ECCN 7A105. This final rule amends ECCN 7A105 by revising the
heading and the Related Definitions paragraph. This final rule revises
the heading of ECCN 7A105 to remove the phrase ``Global Navigation
Satellite Systems (GNSS),'' including the parenthetical phrase with
examples of GNSS, and adds in its place the term 'navigation satellite
systems.' This final rule amends ECCN 7A105 by adding a definition of
'Navigation satellite systems' to the Related Definitions paragraph in
the List of Items Controlled section to define this term for purposes
of this ECCN. The new definition of 'navigation satellite systems'
specifies that these systems include global navigation satellite
systems (GNSS) and regional navigation satellite systems (RNSS) and
provides an illustrative list of such (GNSS, RNSS) systems (MTCR Annex
Change, Category II: Item 11.A.3., Stockholm 2017 TEM and Dublin 2017
Plenary). These changes to ECCN 7A105 are being made in this final rule
because the MTCR Annex entry that addresses receiving equipment for
navigation satellite systems has been expanded to include regional
navigation satellite systems, as well as listing the Chinese system
``BeiDou'' in the examples of GNSS. To accomplish this, as described
above, this final rule in ECCN 7A105 adds a local definition of
'navigation satellite systems,' with expanded examples, to the Related
Definitions paragraph in the List of Items Controlled. ECCN 7A105 does
not
[[Page 44218]]
encompass all of the commodities specified under the MTCR Annex,
Category II, Item 11.A.3 entry, because some of those commodities are
``subject to the ITAR.'' The existing Related Controls paragraph (2) in
ECCN 7A105, as well as the Commerce Control List Order of Review in
Supplement No. 4 to part 774 of the EAR already provides guidance on
this, so no additional changes are needed in this rule to address that
issue. This change is expected to result in an increase of one or fewer
applications received annually by BIS, because of the generally low
number of such items exported.
ECCN 7A107. This final rule amends ECCN 7A107 by revising ``items''
paragraph b in the List of Items Controlled section by removing the
phrase ``capable of providing'' at the beginning of the paragraph. The
phrase is not needed in order to convey the meaning of the control
parameter and removing the phrase makes the control parameter text more
precise. This change is made to conform to this MTCR Annex change. ECCN
7A107.a already reflects changes made in the MTCR Annex, and therefore,
that ``items'' paragraph a did not need to be amended in this final
rule (MTCR Annex Change, Category II: Item 9.A.8., Dublin 2017
Plenary). This is a clarification and will not change any scope of
control. This change is not expected to have any impact on the number
of license applications received by BIS.
ECCN 7A116. This final rule amends ECCN 7A116 by revising the
heading; and adding a License Requirements section, License Exceptions
section and List of Items Controlled section (MTCR Annex Change,
Category II: Item 10.A., Notes, Dublin 2017 Plenary; and Changes to
Align with MTCR Annex). This final rule, in order to fully reflect the
commodities specified in the MTCR Annex, Category II: Item 10.A.,
revises ECCN 7A116 to control items that are not ``subject to the
ITAR,'' but that would otherwise meet the description of items in the
MTCR Annex, Category II: Item 10.A and the new control parameters this
final rule adds to ECCN 7A116.
This final rule does this by revising the heading, which includes
removing the parenthetical phrase that stated that all items in the
heading were ``subject to the ITAR.'' As a conforming change, this
final rule adds a Related Controls paragraph (2) to alert people to see
United States Munitions List (USML) Category IV for items ``specially
designed'' for use in rockets or missiles that are ``subject to the
ITAR.'' This final rule also adds a Related Controls paragraph (1) to
direct people to also see ECCNs 9A610.r and .s for items designated or
modified for military UAVs. This final rule adds a license requirement
for MT 1 and AT 1 for these commodities that this rule controls under
ECCN 7A116.
This final rule adds ``items'' paragraphs a, b, and c to specify
the commodities controlled under ECCN 7A116. This final rule, as
described below in the changes this final rule makes to ECCN 9A012,
removes the control parameters in ``items'' paragraph 9A012.b.5 and
adds (moves) those to ECCN 7A116. These changes are appropriate because
there are no similar controls in the Wassenaar Arrangement for these
commodities that are specified on the MTCR Annex, and under the
Commerce Control List Order of Review these items will be appropriately
controlled under ECCN 7A116. The commodities this rule moves from
9A012.b.5 will no longer be controlled for national security (NS)
reasons, but the commodities will be MT controlled. This final rule
also adds a note at the end of the ``items'' paragraph in the List of
Items Controlled section of ECCN 7A116 to specify that systems,
equipment and valves designed or modified to enable operation of manned
aircraft as unmanned aerial vehicles are included within the scope of
this ECCN.
These changes are not expected to have any impact on the number of
license applications received by BIS, because this equipment is not
widely used or exported.
ECCN 9A012. This final rule amends ECCN 9A012 by revising the
``MT'' paragraph in the table in the License Requirements section and
removing the ``items'' paragraph b.5 in the List of Items Controlled
section. This final rule revises the MT controls paragraph to remove
the term ``Air'' and add in its place ``Aerial'' in the term ``Unmanned
Aerial Vehicles (UAVs).'' This change is made to conform to the MTCR
Annex and other references in the EAR to UAVs. As a conforming change
for the movement of commodities classified in 9A012.b.5, as described
above for the changes this final rule makes to ECCN 7A116, this final
rule revises the MT controls paragraph in ECCN 9A012 to remove the
reference to ``9A012.b'' and add a reference in its place to ECCN
9A120. This final rule also revises the reasons for control in ECCN
9A012 to close a potential gap in the MT controls. If a UAV meets the
requirements of ECCN 9A120, it would be controlled for MT reasons.
However, as the text was written prior to publication of this final
rule, if such a UAV met the requirements of 9A012.a, but did not have
the range of 300 km, it would be controlled by 9A012.a and the MT
control would no longer apply.
For the reasons discussed above regarding the changes to ECCN
7A116, this final rule makes a conforming change to remove ``items''
paragraph b.5 from the List of Items Controlled because these
commodities will be controlled under ECCN 7A116 (MTCR Annex Change,
Category II: Item 10.A., Notes, Dublin 2017 Plenary). These changes are
expected to result in an increase of 1 or fewer applications received
annually by BIS, because these are clarifying changes and reflects the
current interpretation for where these commodities should be controlled
under the EAR.
ECCN 9A101. This final rule amends ECCN 9A101 by revising the
Related Definitions paragraph, revising ``items'' paragraph a, adding
new ``items'' paragraphs a.3 and a.4, and revising ``items'' paragraph
b in the List of Items Controlled section. These changes are being made
to this entry to limit the control to those engines that are most
likely to be used on MTCR controlled cruise missiles and unmanned
aerial vehicles, and to remove controls from larger engines that are
unlikely to be used on such systems. While larger civil certified
engines were already excluded from control under ECCN 9A101, they were
still controlled under ECCN 9A101 prior to completing the civil
certification process (MTCR Annex Change, Category II: Item 3.A.1.a.,
Stockholm 2017 TEM).
This final rule revises the Related Definitions paragraph by
removing the definition of 'maximum thrust value' and adding this
definition as part of three new Technical Notes this final rule adds to
``items'' paragraph a in the List of Items Controlled section of ECCN
9A101. This final rule adds the definition of 'maximum thrust value' as
Technical Note 1 and adds the phrase ``at sea level static conditions
using ICAO standard atmosphere'' to the technical note to add greater
specificity on the conditions under which the measurement needs to be
taken for purposes of ECCN 9A101. This final rule also adds two new
technical notes to ``items'' paragraph a; one for 'dry weight'
(Technical Note 2) and a second for 'first-stage rotor diameter'
(Technical Note 3). The definition of 'dry weight' in Technical Note 2
provides the criteria for what needs to be included in the measurement
and specifies that the measurement should not include the nacelle
(housing). The definition of 'first-stage rotor diameter' in Technical
Note 3, will provide guidance on how
[[Page 44219]]
to measure the diameter of the first rotating stage of the engine.
The final rule revises the introductory text of ``items'' paragraph
a to remove the word ``both'' and add in its place the word ``all.''
This is a conforming change because this rule adds new ``items''
paragraphs a.3 and a.4, and in order to be controlled under ECCN
9A101.a, the engine needs to meet all of the criteria in paragraphs a.1
to a.4. This final rule adds new ``items'' paragraphs a.3 and a.4, to
include the criterion of 'dry weight' less than 750 kg as part of the
criteria that need to be met for an engine to be controlled under ECCN
9A101.a. This final rule also adds a new ``items'' paragraph a.4 to
include the criterion of the ```first-stage rotor diameter' less than 1
m'' as part of the criteria that need to be met for an engine to be
controlled under ECCN 9A101.a. This final rule also revises ``items''
paragraph b, which functions as a catch-all for purposes of this ECCN
for engines designed or modified for use in ``missiles'' or UAVs with a
range equal to or greater than 300 km, to specify paragraph b is not
limited by the 'dry weight' or the 'first-stage rotor diameter' of the
engine. This final rule also revises paragraph b to add the phrase ``or
UAVs with a range equal to or greater than 300 km'' after the term
``missiles.'' The change to add the phrase ``UAVs with a range equal to
or greater than 300 km'' is being made for consistency with the MTCR
Annex (Changes to Align with MTCR Annex).
These changes are expected to result in a decrease of no more than
1 to 3 applications received annually by BIS.
ECCN 9A115. This final rule amends ECCN 9A115 by revising the
heading; and adding a License Requirements section, License Exceptions
section and List of Items Controlled section (Changes to Align with
MTCR Annex). This final rule also revises the heading of ECCN 9A115 by
removing the parenthetical phrase at the end of the heading that
references items controlled in ECCN 9A610 and others that are ``subject
to the ITAR.'' The parenthetical phrase was added to ECCN 9A115 in a
November 21, 2016 final rule (81 FR 83124). This final rule retains
this cross reference between the USML and the CCL, but moves the
substance of this text from the heading of ECCN 9A115 to the new
Related Controls paragraph added by this rule to the License
Requirements section of 9A115. The other changes this final rule makes
to ECCN 9A115 are needed because some of the commodities described in
the heading of ECCN 9A115 are neither ``subject to the ITAR'' nor
controlled in ECCN 9A610.u, but would otherwise meet the control
parameters in the heading of ECCN 9A115. Consistent with the CCL Order
of Review (See Supplement 4 to part 774), and to align with the MTCR
Annex, this rule makes it clear that such commodities are controlled
under 9A115. These changes are expected to result in an increase of 1
or fewer applications received annually by BIS, due to the low volume
of such items exported.
ECCN 9A515. This final rule amends ECCN 9A515 by adding a new
``items'' paragraph h to control spacecraft thrusters for MT reasons.
This final rule also revises the ``MT'' paragraph in the table in the
License Requirements section to specify that the MT control applies to
spacecraft thrusters controlled in 9A515.h when the total impulse
capacity is equal to or greater than 8.41x10[and]5. These changes are
needed to clarify which of the satellite thrusters are subject to the
EAR. On January 10, 2017, Commerce published a final rule (82 FR 2875)
that moved these thrusters from the USML to the CCL, and the Department
of State published a corresponding rule (82 FR 2889) removing the
thrusters from the ITAR. As a consequence of those rules, the public
sought clarification from BIS on what items were actually ``subject to
the EAR.''
Consistent with the Commerce January 10, 2017 final rule, the
Department of State has informed Commerce that it intends to clarify
that the existing USML IV(d) paragraph does not control spacecraft
thrusters, and that such thrusters are ``subject to the EAR.'' Commerce
agrees with the Department of State that adding a note to the USML
clarifying these controls will assist exporters in better determining
the control jurisdiction of the spacecraft thrusters that were moved
from the USML to the CCL in the January 10, 2017 final rule.
The questions raised by the public and discussions between the
Department of Commerce and State, including the discussions regarding
the spacecraft thruster controls, identified a need to add an MT
control to the spacecraft thrusters to align with the MTCR Annex.
Following the USML Order of Review and CCL Order of Review, these
spacecraft thrusters were, prior to publication of this final rule,
controlled under ``items'' paragraph x of ECCN 9A515. Because ``items''
paragraph x is not MT controlled, this final rule adds a separate
``items'' paragraph h to ECCN 9A515 to allow for the imposition of an
MT control on these spacecraft thrusters to align with the MTCR Annex
(Changes to Align with MTCR Annex). Finally, as a conforming change
consistent with the addition of ``items'' paragraph h, this final rule
reserves ``items'' paragraphs i through w. These changes are expected
to result in an annual increase of twelve license applications received
by BIS.
ECCN 9A610. This final rule amends ECCN 9A610 by making revisions
to the ``items'' paragraph (MTCR Annex Change, Category II: Item 10.A.,
Notes, Dublin 2017 Plenary). This final rule redesignates ``items''
paragraph w as ``items'' paragraph w.1 and creates new ``items''
paragraph w.2 in ECCN 9A610, including redesignating Note to paragraph
w, as Note to paragraph w.1. In addition to this redesignation, this
final rule removes the term ``drones'' from ``items'' paragraph w.1 and
the Note to paragraph w.1 because the MTCR Annex does not use the term
``drones,'' other than stating that drones are a type of UAV, and
therefore the term does not need to be included in ``items'' paragraph
w.1 or in the Note. This final rule for the same reason also removes
the term ``drones'' from ``items'' paragraphs u and v, including in the
Note to paragraph u and Note to paragraph v (Changes to Align with MTCR
Annex). This final rule also adds a new ``items'' paragraph w.2, to
control for MT reasons, flight control servo valves designed or
modified for the systems in 9A610.w.1, and the additional criteria this
final rule includes in new ``items'' paragraph w.2. This final rule
makes these changes in ECCN 9A610 in order to accommodate the new
``items'' paragraph w.2, which corresponds to MTCR Annex, Category II,
Item 10.A.3, but had not previously been listed on the CCL.
This final rule also adds a Note to paragraphs w.1 and w.2 to
specify that these two ``items'' paragraphs include systems, equipment
and valves designed or modified to enable operation of manned aircraft
as unmanned aerial vehicles. The addition of the note will clarify that
the controls include equipment when used for the conversion of a manned
aircraft to operate as a UAV. Some of this type of equipment is
``subject to the ITAR,'' and some of this type of equipment is
``subject to the EAR.'' Prior to publication of this final rule, the
type of equipment referenced in ECCN 7A116 made it appear that all of
this type of equipment was ``subject to the ITAR,'' which is correct
for certain equipment, but not for all such equipment. For example,
some of this equipment prior to publication of this final rule was
controlled in ECCN 9A610.w. The changes described above that this final
rule makes to ECCNs 7A116 and 9A610, will make needed corrections to
clarify
[[Page 44220]]
where this type of equipment is controlled on the CCL.
Prior to publication of this rule, some of the equipment specified
in MTCR Annex, Category II, Item 10.A.3. was not controlled on the CCL.
While ECCN 9A106 has an entry for the equipment used in liquid
propulsion systems for rockets, there was not a corresponding entry
listing the equipment used in UAVs. To correct this gap in coverage,
this final rule adds the criteria in MTCR Annex, Category II, 10.A.3.
to ECCNs 7A116 and 9A610, as described above.
These changes are not expected to have any impact on the number of
license applications received by BIS due to the low volume of such
items exported.
Savings Clause
Shipments of items removed from eligibility for a License Exception
or export or reexport without a license (NLR) as a result of this
regulatory action that were on dock for loading, on lighter, laden
aboard an exporting or reexporting carrier, or enroute aboard a carrier
to a port of export or reexport, on August 30, 2018, pursuant to actual
orders for export or reexport to a foreign destination, may proceed to
that destination under the previous eligibility for a License Exception
or export or reexport without a license (NLR) so long as they are
exported or reexported before October 1, 2018. Any such items not
actually exported or reexported before midnight, on October 1, 2018,
require a license in accordance with this rule.
Export Control Reform Act of 2018
On August 13, 2018, the President signed into law the John S.
McCain National Defense Authorization Act for Fiscal Year 2019, which
included the Export Control Reform Act of 2018 (ECRA) (Title XVII,
Subtitle B of Pub. L. 115-232) that provides the legal basis for BIS's
principal authorities and serves as the authority under which BIS
issues this rule. As set forth in Section 1768 of ECRA, all
delegations, rules, regulations, orders, determinations, licenses, or
other forms of administrative action that have been made, issued,
conducted, or allowed to become effective under the Export
Administration Act of 1979 (50 U.S.C. 4601 et seq.) (as in effect prior
to August 13, 2018 and as continued in effect pursuant to the
International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.)
and Executive Order 13222 of August 17, 2001, 3 CFR, 2001 Comp., p. 783
(2002), as amended by Executive Order 13637 of March 8, 2013, 78 FR
16129 (March 13, 2013), and as extended by the Notice of August 8,
2018, 83 FR 39871 (August 13, 2018)), or the Export Administration
Regulations, and are in effect as of August 13, 2018, shall continue in
effect according to their terms until modified, superseded, set aside,
or revoked under the authority of ECRA.
Executive Order Requirements
Executive Orders 13563 and 12866 direct agencies to assess all
costs and benefits of available regulatory alternatives and, if
regulation is necessary, to select regulatory approaches that maximize
net benefits (including potential economic, environmental, public
health and safety effects, distribute impacts, and equity). Executive
Order 13563 emphasizes the importance of quantifying both costs and
benefits, of reducing costs, of harmonizing rules, and of promoting
flexibility. This final rule has been designated a ``significant
regulatory action'' under Executive Order 12866. The MTCR was formed in
1987 by the U.S. and G-7 countries (Canada, France, Germany, Italy,
Japan, and the UK) to address the increasing proliferation of nuclear
weapons by addressing the most destabilizing delivery system for such
weapons. The MTCR seeks to limit the risk of proliferation of weapons
of mass destruction by controlling exports of goods and technologies
that could make a contribution to delivery systems (other than manned
aircraft) for such weapons. The proliferation of such weapons has been
identified as a threat to domestic and international peace and
security. Commerce estimates this rule will not change the number of
license requests received by BIS annually.
This rule does not contain policies with Federalism implications as
that term is defined under E.O. 13132.
For the purposes of E.O. 13771, this rule is issued with respect to
a national security function of the United States. The cost-benefit
analysis indicates the rule is intended to improve national security as
its primary direct benefit, and the regulation qualifies for a good
cause exception under 5 U.S.C. 553(b)(B). Accordingly, this rule meets
the requirements set forth in the April 5, 2017, OMB guidance
implementing E.O 13771, and is, therefore, exempt from the requirements
of E.O. 13771.
Paperwork Reduction Act Requirements
Notwithstanding any other provision of law, no person may be
required to respond to or be subject to a penalty for failure to comply
with a collection of information, subject to the requirements of the
Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.) (PRA), unless
that collection of information displays a currently valid Office of
Management and Budget (OMB) Control Number.
This regulation involves a collection currently approved by OMB
under control number 0694-0088, Simplified Network Application
Processing System. This collection includes, among other things,
license applications, and carries a burden estimate of 43.8 minutes for
a manual or electronic submission for a total burden estimate of 31,833
hours. BIS expects the burden hours associated with this collection to
increase slightly by ten hours for an estimated cost increase of $378.
This increase is not expected to exceed the existing estimates
currently associated with OMB control number 0694-0088. Although this
final rule makes important changes to the EAR for items controlled for
missile technology reasons, Commerce believes the overall increase in
costs and burdens due to this rule will be minimal.
Any comments regarding the collection of information associated
with this rule, including suggestions for reducing the burden, may be
sent to Jasmeet K. Seehra, Office of Management and Budget (OMB), by
email to [email protected], or by fax to (202) 395-7285.
Administrative Procedure Act and Regulatory Flexibility Act
Requirements
The provisions of the Administrative Procedure Act (APA) (5 U.S.C.
553) requiring notice of proposed rulemaking, the opportunity for
public participation, and a delay in effective date, are inapplicable
because this action involves a military and foreign affairs function of
the United States (5 U.S.C. 553(a)(1)). Immediate implementation of
these amendments fulfills the United States' international commitments
to the MTCR. The MTCR contributes to international peace and security
by promoting greater responsibility in transfers of missile technology
items that could make a contribution to delivery systems (other than
manned aircraft) for weapons of mass destruction. The MTCR consists of
35 member countries acting on a consensus basis. The changes discussed
in this rule implement agreements reached at the October 2017 Plenary
in Dublin, Ireland, and the May 2017 Technical Experts Meeting in
Stockholm, Sweden. Since the United States is a significant exporter of
the items discussed in this rule, implementation of this provision is
[[Page 44221]]
necessary for the MTCR to achieve its purpose.
Although the APA requirements in section 553 are not applicable to
this action under the provisions of paragraph (a)(1), this action also
falls within two other exceptions in the section. The subsection (b)
requirement that agencies publish a notice of proposed rulemaking that
includes information on the public proceedings does not apply when an
agency for good cause finds that the notice and public procedures are
impracticable, unnecessary, or contrary to the public interest, and the
agency incorporates the finding (and reasons therefor) in the rule that
is issued (5 U.S.C. 553(b)(B)). In addition, the section 553(d)
requirement that publication of a rule shall be made not less than 30
days before its effective date can be waived if an agency finds there
is good cause to do so.
The section 553 requirements for notice and public procedures and
for a delay in the date of effectiveness do not apply to this rule, as
there is good cause to waive such practices. Delay in implementation
would be contrary to the public interest because it would disrupt the
movement of these potentially national and international security
threatening items globally, creating disharmony between export control
measures implemented by MTCR members. Export controls work best when
all countries implement the same export controls in a timely manner.
Delaying this rulemaking would prevent the United States from
fulfilling its commitment to the MTCR in a timely manner, would injure
the credibility of the United States in this and other multilateral
regimes, and could impair the international community's ability to
effectively control the export of certain potentially national and
international security threatening items. Therefore, this regulation is
issued in final form, and is effective August 30, 2018.
Further, no other law requires that a notice of proposed rulemaking
and an opportunity for public comment be given for this final rule.
Because a notice of proposed rulemaking and an opportunity for public
comment are not required to be given for this rule under the
Administrative Procedure Act or by any other law, the analytical
requirements of the Regulatory Flexibility Act (5 U.S.C. 601 et seq.)
are not applicable. Accordingly, no regulatory flexibility analysis is
required and none has been prepared.
List of Subjects in 15 CFR Part 774
Exports, Reporting and recordkeeping requirements.
Accordingly, part 774 of the Export Administration Regulations (15
CFR parts 730-774) is amended as follows:
PART 774--[AMENDED]
0
1. The authority citation for 15 CFR part 774 is revised to read as
follows:
Authority: Pub. L. 115-232, Title XVII, Subtitle B. 50 U.S.C.
4601 et seq.; 50 U.S.C. 1701 et seq.; 10 U.S.C. 7420; 10 U.S.C.
7430(e); 22 U.S.C. 287c, 22 U.S.C. 3201 et seq.; 22 U.S.C. 6004; 42
U.S.C. 2139a; 15 U.S.C. 1824a; 50 U.S.C. 4305; 22 U.S.C. 7201 et
seq.; 22 U.S.C. 7210; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p.
228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783; Notice of
August 8, 2018, 83 FR 39871 (August 13, 2018).
0
2. In Supplement No. 1 to part 774, Category 1, revise Export Control
Classification Number (ECCN) 1B117 to read as follows:
Supplement No. 1 to Part 774--The Commerce Control List
* * * * *
1B117 Batch mixers having all of the following (see List of Items
Controlled), and ``specially designed'' ``parts'' and ``components''
therefor.
License Requirements
Reason for Control: MT, AT
Country chart (see Supp.
Control(s) No. 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: See 1B115, 1B118, and 1B119.
Related Definitions: N/A
Items:
a. Capable of mixing under vacuum in the range from zero to
13.326 kPa;
b. Capable of controlling the temperature of the mixing chamber;
c. A total volumetric capacity of 110 liters (30 gallons) or
more; and
d. At least one `mixing/kneading shaft' mounted off center.
Note to paragraph d: In 1B117.d. the term `mixing/kneading
shaft' does not refer to deagglomerators or knife-spindles.
0
3. In Supplement No. 1 to part 774, Category 1, revise ECCN 1B118 to
read as follows:
1B118 Continuous mixers having all of the following (see List of
Items Controlled), and ``specially designed'' ``parts'' and
``components'' therefor.
License Requirements
Reason for Control: MT, AT
Country chart (see Supp.
Control(s) No. 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: See 1B115, 1B117, and 1B119.
Related Definitions: N/A
Items:
a. Capable of mixing under vacuum in the range from zero to
13.326 kPa;
b. Capable of controlling the temperature of the mixing chamber;
and
c. Either of the following:
c.1. Two or more mixing/kneading shafts; or
c.2. A single rotating and oscillating shaft with kneading
teeth/pins as well as kneading teeth/pins inside the casing of the
mixing chamber.
0
4. In Supplement No. 1 to part 774, Category 1, revise ECCN 1C111 to
read as follows:
1C111 Propellants and constituent chemicals for propellants, other
than those specified in 1C011, as follows (see List of Items
Controlled).
License Requirements
Reason for Control: MT, NP, RS, AT
Country chart (see Supp.
Control(s) No. 1 to part 738)
MT applies to entire entry................ MT Column 1
NP applies to 1C111.a.3.f only............ NP Column 1
RS applies to 1C111.d.3 only.............. RS Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: (1) See USML Category V(e)(7) for controls on HTPB
(hydroxyl terminated polybutadiene) with a hydroxyl functionality
equal to or greater than 2.2 and less than or equal to 2.4, a
hydroxyl value of less than 0.77 meq/g, and a viscosity at 30 [deg]C
of less than 47 poise (CAS # 69102-90-5). (2) See USML Category
V(f)(3) for controls on ferrocene derivatives, including butacene.
(3) See ECCN 1C608 for controls on oxidizers that
[[Page 44222]]
are composed of fluorine and also other halogens, oxygen, or
nitrogen, except for chlorine trifluoride, which is controlled under
this ECCN 1C111.a.3.f. (4) See ECCN 1C011.b for controls on boron
and boron alloys not controlled under this ECCN 1C111.a.2.b. (5) See
USML Category V(d)(10) for controls on Inhibited Red Fuming Nitric
Acid (IRFNA) (CAS 8007-58-7).
Related Definitions: Particle size is the mean particle diameter on
a weight or volume basis. Best industrial practices must be used in
sampling, and in determining particle size, and the controls may not
be undermined by the addition of larger or smaller sized material to
shift the mean diameter.
Items:
a. Propulsive substances:
a.1. Spherical or spheroidal aluminum powder (C.A.S. 7429-90-5)
in particle size of less than 200 x 10-6 m (200 [micro]m)
and an aluminum content of 97% by weight or more, if at least 10% of
the total weight is made up of particles of less than 63 [micro]m,
according to ISO 2591-1:1988 or national equivalents.
Technical Note: A particle size of 63 [mu]m (ISO R-565)
corresponds to 250 mesh (Tyler) or 230 mesh (ASTM standard E-11).
a.2. Metal powders and alloys where at least 90% of the total
particles by particle volume or weight are made up of particles of
less than 60 [micro] (determined by measurement techniques such as
using a sieve, laser diffraction or optical scanning), whether
spherical, atomized, spheroidal, flaked or ground, as follows:
a.2.a. Consisting of 97% by weight or more of any of the
following:
a.2.a.1. Zirconium (C.A.S. #7440-67-7);
a.2.a.2. Beryllium (C.A.S. #7440-41-7); or
a.2.a.3. Magnesium (C.A.S. #7439-95-4);.
a.2.b. Boron or boron alloys with a boron content of 85% or more
by weight.
Technical Note: The natural content of hafnium in the zirconium
(typically 2% to 7%) is counted with the zirconium.
Note: In a multimodal particle distribution (e.g., mixtures of
different grain sizes) in which one or more modes are controlled,
the entire powder mixture is controlled.
a.3. Oxidizer substances usable in liquid propellant rocket
engines, as follows:
a.3.a. Dinitrogen trioxide (CAS 10544-73-7);
a.3.b. Nitrogen dioxide (CAS 10102-44-0)/dinitrogen tetroxide
(CAS
10544-72-6);
a.3.c. Dinitrogen pentoxide (CAS 10102-03-1);
a.3.d. Mixed oxides of nitrogen (MON);
a.3.e. [RESERVED];
a.3.f. Chlorine trifluoride (ClF3).
Technical Note: Mixed oxides of nitrogen (MON) are solutions of
nitric oxide (NO) in dinitrogen tetroxide/nitrogen dioxide
(N2O4/NO2) that can be used in
missile systems. There are a range of compositions that can be
denoted as MONi or MONij, where i and j are integers representing
the percentage of nitric oxide in the mixture (e.g., MON3 contains
3% nitric oxide, MON25 25% nitric oxide. An upper limit is MON40,
40% by weight).
b. Polymeric substances:
b.1. Carboxy-terminated polybutadiene (including carboxyl-
terminated polybutadiene) (CTPB);
b.2. Hydroxy-terminated polybutadiene (including hydroxyl-
terminated polybutadiene) (HTPB) (CAS 69102-90-5), except for
hydroxyl-terminated polybutadiene as specified in USML Category V
(see 22 CFR 121.1) (also see Related Controls Note #1 for this
ECCN);
b.3. Polybutadiene acrylic acid (PBAA);
b.4. Polybutadiene acrylic acid acrylonitrile (PBAN) (CAS 25265-
19-4/CAS 68891-50-9);
b.5. Polytetrahydrofuran polyethylene glycol (TPEG).
Technical Note: Polytetrahydrofuran polyethylene glycol (TPEG)
is a block copolymer of poly 1,4-Butanediol (CAS 110-63-4) and
polyethylene glycol (PEG) (CAS 25322-68-3).
c. Other propellant energetic materials, additives, or agents:
c.1. [RESERVED]
c.2. Triethylene glycol dinitrate (TEGDN);
c.3. 2 Nitrodiphenylamine (2-NDPA);
c.4. Trimethylolethane trinitrate (TMETN);
c.5. Diethylene glycol dinitrate (DEGDN).
d. Hydrazine and derivatives as follows:
d.1. Hydrazine (C.A.S. #302-01-2) in concentrations of 70% or
more;
d.2. Monomethyl hydrazine (MMH) (C.A.S. #60-34-4);
d.3. Symmetrical dimethyl hydrazine (SDMH) (C.A.S. #540-73-8);
d.4. Unsymmetrical dimethyl hydrazine (UDMH) (C.A.S. #57-14-7);
d.5. Trimethylhydrazine (C.A.S. #1741-01-1);
d.6. Tetramethylhydrazine (C.A.S. #6415-12-9);
d.7. N,N diallylhydrazine (CAS 5164-11-4);
d.8. Allylhydrazine (C.A.S. #7422-78-8);
d.9. Ethylene dihydrazine (CAS 6068-98-0);
d.10. Monomethylhydrazine dinitrate;
d.11. Unsymmetrical dimethylhydrazine nitrate;
d.12. 1,1-Dimethylhydrazinium azide (CAS 227955-52-4)/1,2-
Dimethylhydrazinium azide (CAS 299177-50-7);
d.13. Hydrazinium azide (C.A.S. #14546-44-2);
d.14. Hydrazinium dinitrate (CAS 13464-98-7);
d.15. Diimido oxalic acid dihydrazine (C.A.S. #3457-37-2);
d.16. 2-hydroxyethylhydrazine nitrate (HEHN);
d.17. Hydrazinium diperchlorate (C.A.S. #13812-39-0);
d.18. Methylhydrazine nitrate (MHN) (CAS 29674-96-2);
d.19. 1,1-Diethylhydrazine nitrate (DEHN)/1,2-Diethylhydrazine
nitrate (DEHN) (CAS 363453-17-2);
d.20. 3,6-dihydrazino tetrazine nitrate (DHTN), also referred to
as 1,4-dihydrazine nitrate.
0
5. In Supplement No. 1 to part 774, Category 1, revise ECCN 1C118 to
read as follows:
1C118 Titanium-stabilized duplex stainless steel (Ti-DSS), having
all of the following characteristics (see List of Items Controlled).
License Requirements
Reason for Control: MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: N/A
Related Definitions: N/A
Items:
a. Having all of the following characteristics:
a.1. Containing 17.0-23.0% by weight of chromium and 4.5-7.0% by
weight of nickel;
a.2. Having a titanium content of greater than 0.10% by weight;
and
a.3. A ferritic-austenitic microstructure (also referred to as a
two-phase microstructure) of which at least 10% by volume (according
to ASTM E-1181-87 or national equivalents) is austenite; and
b. Having any of the following forms:
b.1. Ingots or bars having a size of 100 mm or more in each
dimension;
b.2. Sheets having a width of 600 mm or more and a thickness of
3 mm or less; or
b.3. Tubes having an outer diameter of 600 mm or more and a wall
thickness of 3 mm or less.
0
6. In Supplement No. 1 to part 774, Category 2, revise ECCN 2B109 to
read as follows:
2B109 Flow-forming machines, other than those controlled by 2B009,
as follows (see List of Items Controlled).
License Requirements
Reason for Control: MT, NP, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
NP applies to items controlled by this NP Column 1
entry that meet or exceed the technical
parameters in 2B209.
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
[[Page 44223]]
List of Items Controlled
Related Controls: (1) See ECCN 2D101 for ``software'' for items
controlled under this entry. (2) See ECCNs 2E001 (``development''),
2E002 (``production''), and 2E101 (``use'') for technology for items
controlled under this entry. (3) Also see ECCNs 2B009 and 2B209.
Related Definitions: N/A
Items:
a. Flow-forming machines, usable in the ``production'' of
propulsion components and equipment (e.g., motor cases and
interstages) for ``missiles'', having all of the following:
a.1. Equipped with, or according to the manufacturer's technical
specification are capable of being equipped with, ``numerical
control'' units or a computer control, even when not equipped with
such units at delivery; and
a.2. More than two axes which can be coordinated simultaneously
for ``contouring control.''
b. ``Specially designed'' ``parts'' and ``components'' for flow-
forming machines controlled in 2B009 for MT reasons or 2B109.a.
Technical Note: 1. Machines combining the function of spin-
forming and flow-forming are for the purpose of 2B109 regarded as
flow-forming machines.
0
7. In Supplement No. 1 to part 774, Category 2, revise ECCN 2B120 to
read as follows:
2B120 Motion simulators or rate tables (equipment capable of
simulating motion), having all of the following characteristics (see
List of Items Controlled).
License Requirements
Reason for Control: MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: (1) Rate tables not controlled by 2B120 and
providing the characteristics of a positioning table are to be
evaluated according to 2B121. (2) Equipment that has the
characteristics specified in 2B121, which also meets the
characteristics of 2B120 will be treated as equipment specified in
2B120. (3) See also 2B008, 2B121, 7B101 and 7B994.
Related Definitions: N/A
Items:
a. Two or more axes;
b. Designed or modified to incorporate sliprings or integrated
non-contact devices capable of transferring electrical power, signal
information, or both; and
c. Having any of the following characteristics:
c.1. For any single axis having all of the following:
c.1.a. Capable of rates of rotation of 400 degrees/s or more, or
30 degrees/s or less, and
c.1.b. A rate resolution equal to or less than 6 degrees/s and
an accuracy equal to or less than 0.6 degrees/s; or
c.2. Having a worst-case rate stability equal to or better
(less) than plus or minus 0.05% averaged over 10 degrees or more; or
c.3. A positioning ``accuracy'' equal to or better than 5 arc-
second.
Note: 2B120 does not control rotary tables designed or modified
for machine tools or for medical equipment. For controls on machine
tool rotary tables see 2B008.
0
8. In Supplement No. 1 to part 774, Category 2, revise ECCN 2B121 to
read as follows:
2B121 Positioning tables (equipment capable of precise rotary
position in any axis), other than those controlled in 2B120, having
all the following characteristics (See List of Items Controlled).
License Requirements
Reason for Control: MT, AT
Country chart (see supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: (1) Equipment that has the characteristics
specified in 2B121, which also meets the characteristics of 2B120
will be treated as equipment specified in 2B120. (2) See also 2B008,
2B120, 7B101, and 7B994.
Related Definitions: N/A
Items:
a. Two or more axes; and
b. A positioning ``accuracy'' equal to or better than 5 arc-
second.
Note: 2B121 does not control rotary tables designed or modified
for machine tools or for medical equipment. For controls on machine
tool rotary tables see 2B008.
0
9. In Supplement No. 1 to part 774, Category 2, revise ECCN 2B122 to
read as follows:
2B122 Centrifuges capable of imparting accelerations greater than
100 g and designed or modified to incorporate sliprings or
integrated non-contact devices capable of transferring electrical
power, signal information, or both.
License Requirements
Reason for Control: MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: See also 7B101.
Related Definitions: N/A
Items:
The list of items controlled is contained in the ECCN heading.
0
10. In Supplement No. 1 to part 774, Category 6, revise ECCN 6A107 to
read as follows:
6A107 Gravity meters (gravimeters) or gravity gradiometers, other
than those controlled by 6A007, designed or modified for airborne or
marine use, as follows, (see List of Items Controlled) and
``specially designed'' ``parts'' and ``components'' therefor.
License Requirements
Reason for Control: MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: See USML Category XII(d) for certain gravity
meters (gravimeters) or gravity gradiometers subject to the ITAR.
See also ECCN 7A611.
Related Definitions: `Time to steady-state registration' (also
referred to as the gravity meter's response time) is the time over
which the disturbing effects of platform-induced acceleration (high
frequency noise) are reduced.
Items:
a. Gravity meters having all the following:
a.1. A static or operational accuracy equal to or less (better)
than 0.7 milligal (mgal); and
a.2. A `time to steady-state registration' of two minutes or
less.
b. Gravity gradiometers.
0
11. In Supplement No. 1 to part 774, Category 7, revise ECCN 7A105 to
read as follows:
[[Page 44224]]
7A105 Receiving equipment for `navigation satellite systems'
designed or modified for airborne applications and capable of
providing navigation information at speeds in excess of 600 m/s
(1,165 nautical mph), and ``specially designed'' ``parts'' and
``components'' therefor.
License Requirements
Reason for Control: MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: (1) See also 7A005 and 7A994. (2) See Categories
XI and XV of the U.S. Munitions List (22 CFR 121.1) for controls on
similar equipment ``specially designed'' for defense articles.
Related Definitions: `Navigation satellite systems' include Global
Navigation Satellite Systems (GNSS; e.g., GPS, GLONASS, Galileo or
BeiDou) and Regional Navigation Satellite Systems (RNSS; e.g.,
NavIC, QZSS).
Items:
The list of items controlled is contained in the ECCN heading.
0
12. In Supplement No. 1 to part 774, Category 7, revise ECCN 7A107 to
read as follows:
7A107 Three axis magnetic heading sensors having all of the
following characteristics (see List of Items Controlled), and
``specially designed'' ``parts'' and ``components'' therefor.
License Requirements
Reason for Control: MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: N/A
Related Definitions: N/A
Items:
a. Internal tilt compensation in pitch (+/-90 degrees) and roll
(+/-180 degrees) axes;
b. Azimuthal accuracy better (less) than 0.5 degrees rms at
latitudes of +/-80 degrees, referenced to local magnetic field; and
c. Designed or modified to be integrated with flight control and
navigation systems.
Note: Flight control and navigation systems in 7A107 include
gyrostabilizers, automatic pilots and inertial navigation systems.
0
13. In Supplement No. 1 to part 774, Category 7, revise ECCN 7A116 to
read as follows:
7A116 Flight control systems and ``parts'' and ``components'', as
follows (see List of Items Controlled).
License Requirements
Reason for Control: MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: (1) See 9A610.r. and 9A610.s. for items designed
or modified for military UAVs. (2) See USML Category IV for items
``specially designed'' for use in rockets or missiles that are
``subject to the ITAR.''
Related Definitions: N/A
Items:
a. Pneumatic, hydraulic, mechanical, electro-optical, or
electromechanical flight control systems (including fly-by-wire and
fly-by-light systems) designed or modified for UAVs capable of
delivering at least 500 kilograms of payload to a range of at least
300 km, other than those controlled by either USML paragraph VIII(a)
or ECCN 9A610.a;
b. Attitude control equipment designed or modified for UAVs
capable of delivering at least 500 kilograms of payload to a range
of at least 300 km, other than those controlled by either USML
paragraph VIII(a) or ECCN 9A610.a;
c. Flight control servo valves designed of modified for the
systems in 7A116.a. or 7A116.b, and designed or modified to operate
in a vibration environment greater than 10 g rms over the entire
range between 20Hz and 2 kHz.
Note: This entry includes the systems, equipment and valves
designed or modified to enable operation of manned aircraft as
unmanned aerial vehicles.
0
14. In Supplement No. 1 to part 774, Category 9, revise ECCN 9A012 to
read as follows:
9A012 Non-military ``Unmanned Aerial Vehicles,'' (``UAVs''),
unmanned ``airships'', related equipment and ``components'', as
follows (see List of Items Controlled).
License Requirements
Reason for Control: NS, MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
NS applies to entire entry................ NS Column 1
MT applies to non-military Unmanned Aerial MT Column 1
Vehicles (UAVs) and Remotely Piloted
Vehicles (RPVs) that are capable of a
maximum range of at least 300 kilometers
(km), regardless of payload, and UAVs
that meet the requirements of 9A120.
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: See the U.S. Munitions List Category VIII (22 CFR
part 121). Also see ECCN 9A610 and Sec. 744.3 of the EAR.
Related Definitions: N/A
Items:
a. ``UAVs'' or unmanned ``airships'', designed to have
controlled flight out of the direct `natural vision' of the
`operator' and having any of the following:
a.1. Having all of the following:
a.1.a. A maximum `endurance' greater than or equal to 30 minutes
but less than 1 hour; and
a.1.b. Designed to take-off and have stable controlled flight in
wind gusts equal to or exceeding 46.3 km/h (25 knots); or
a.2. A maximum `endurance' of 1 hour or greater;
Technical Notes:
1. For the purposes of 9A012.a, `operator' is a person who
initiates or commands the ``UAV'' or unmanned ``airship'' flight.
2. For the purposes of 9A012.a, `endurance' is to be calculated
for ISA conditions (ISO 2533:1975) at sea level in zero wind.
3. For the purposes of 9A012.a, `natural vision' means unaided
human sight, with or without corrective lenses.
b. Related equipment and ``components'', as follows:
b.1 [Reserved]
b.2. [Reserved]
b.3. Equipment or ``components'' ``specially designed'' to convert
a manned ``aircraft'' or a manned ``airship'' to a ``UAV'' or unmanned
``airship'', controlled by 9A012.a;
b.4. Air breathing reciprocating or rotary internal combustion type
engines, ``specially designed'' or modified to
[[Page 44225]]
propel ``UAVs'' or unmanned ``airships'', at altitudes above 15,240
meters (50,000 feet).
0
15. In Supplement No. 1 to part 774, Category 9, revise ECCN 9A101 to
read as follows:
9A101 Turbojet and turbofan engines, other than those controlled by
9A001, as follows (see List of Items Controlled).
License Requirements
Reason for Control: MT, AT
Country chart (see Supp. No.
Control(s) 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: 9A101.b controls only engines for non-military
unmanned aerial vehicles [UAVs] or remotely piloted vehicles [RPVs],
and does not control other engines designed or modified for use in
``missiles'', which are ``subject to the ITAR'' (see 22 CFR parts
120 through 130).
Related Definitions: N/A
Items:
a. Engines having all of the following characteristics:
a.1. `Maximum thrust value' greater than 400 N (achieved un-
installed) excluding civil certified engines with a maximum thrust
value greater than 8,890 N (achieved un-installed);
a.2. Specific fuel consumption of 0.15 kg N-1
h-1 or less (at maximum continuous power at sea level
static conditions using the ICAO standard atmosphere);
a.3. `Dry weight' less than 750 kg; and
a.4. `First -stage rotor diameter' less than 1 m; or
Technical Notes:
1. `Maximum thrust value' in 9A101.a.1 is the manufacturer's
demonstrated maximum thrust for the engine type un-installed at sea
level static conditions using the ICAO standard atmosphere. The
civil type certified thrust value will be equal to or less than the
manufacturer's demonstrated maximum thrust for the engine type.
2. `Dry weight' is the weight of the engine without fluids
(fuel, hydraulic fluid, oil, etc.) and does not include the nacelle
(housing).
3. `First-stage rotor diameter' is the diameter of the first
rotating stage of the engine, whether a fan or compressor, measured
at the leading edge of the blade tips.
b. Engines designed or modified for use in ``missiles'' or UAVs
with a range equal to or greater than 300 km, regardless of thrust,
specific fuel consumption, `dry weight' or `first-stage rotor
diameter'.
0
16. In Supplement No. 1 to part 774, Category 9, revise ECCN 9A115 to
read as follows:
9A115 Apparatus, devices and vehicles, designed or modified for the
transport, handling, control, activation and launching of rockets,
missiles, and unmanned aerial vehicles capable of achieving a
``range'' equal to or greater than 300 km.
License Requirements
Reason for Control: MT, AT
Country chart (see Supp.
Control(s) No. 1 to part 738)
MT applies to entire entry................ MT Column 1
AT applies to entire entry................ AT Column 1
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: N/A
GBS: N/A
CIV: N/A
List of Items Controlled
Related Controls: See the U.S. Munitions List (22 CFR part 121).
Also see ECCN 9A610.u.
Related Definitions: N/A
Items:
The list of items controlled is contained in the ECCN heading.
0
17. In Supplement No. 1 to part 774, Category, revise ECCN 9A515 to
read as follows:
9A515 ``Spacecraft'' and related commodities, as follows (see List
of Items Controlled).
License Requirements
Reason for Control: NS, RS, MT, AT
Country chart (see Supp.
Control(s) No.1 to part 738)
NS applies to entire entry, except .e and NS Column 1
.y.
RS applies to entire entry, except .e and RS Column 1
.y.
RS applies to 9A515.e..................... RS Column 2
MT applies to microcircuits in 9A515.d and MT Column 1
9A515.e.2 when ``usable in'' ``missiles''
for protecting ``missiles'' against
nuclear effects (e.g., Electromagnetic
Pulse (EMP), X-rays, combined blast and
thermal effects). MT also applies to
9A515.h when the total impulse capacity
is equal to or greater than 8.41x10[and]5
newton seconds.
AT applies to entire entry................ AT Column 1
License Requirement Note: The Commerce Country Chart is not
used for determining license requirements for commodities classified
in ECCN 9A515.a.1, .a.2, .a.3, .a.4, and .g. See Sec. 742.6(a)(8),
which specifies that such commodities are subject to a worldwide
license requirement.
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: $1500
GBS: N/A
CIV: N/A
Special Conditions for STA
STA: (1) Paragraph (c)(1) of License Exception STA (Sec.
740.20(c)(1) of the EAR) may not be used for ``spacecraft'' in ECCN
9A515.a.1, .a.2, .a.3, or .a.4, or items in 9A515.g, unless
determined by BIS to be eligible for License Exception STA in
accordance with Sec. 740.20(g) (License Exception STA eligibility
requests for certain 9x515 and ``600 series'' items). (2) License
Exception STA may not be used if the ``spacecraft'' controlled in
ECCN 9A515.a.1, .a.2, .a.3, or .a.4 contains a separable or
removable propulsion system enumerated in USML Category IV(d)(2) or
USML Category XV(e)(12) and designated MT. (3) Paragraph (c)(2) of
License Exception STA (Sec. 740.20(c)(2) of the EAR) may not be
used for any item in 9A515.
List of Items Controlled
Related Controls: Spacecraft, launch vehicles and related articles
that are enumerated in the USML, and technical data (including
``software'') directly related thereto, and all services (including
training) directly related to the integration of any satellite or
spacecraft to a launch vehicle, including both planning and onsite
support, or furnishing any assistance (including training) in the
launch failure analysis or investigation for items in ECCN 9A515.a,
are ``subject to the ITAR.'' All other ``spacecraft,'' as enumerated
below and defined in Sec. 772.1, are subject to the controls of
this ECCN. See also ECCNs 3A001, 3A002, 3A991, 3A992, 6A002,
[[Page 44226]]
6A004, 6A008, and 6A998 for specific ``space-qualified'' items,
7A004 and 7A104 for star trackers, and 9A004 for the International
Space Station (ISS), the James Webb Space Telescope (JWST), and
``specially designed'' ``parts'' and ``components'' therefor. See
USML Category XI(c) for controls on ``Monolithic Microwave
Integrated Circuit'' (``MMIC'') amplifiers that are ``specially
designed'' for defense articles. See ECCN 9A610.g for pressure suits
used for high altitude aircraft.
Related Definitions: `Microcircuit' means a device in which a number
of passive or active elements are considered as indivisibly
associated on or within a continuous structure to perform the
function of a circuit.
Items:
``Spacecraft'' and other items described in ECCN 9A515 remain
subject to the EAR even if exported, reexported, or transferred (in-
country) with defense articles ``subject to the ITAR'' integrated
into and included therein as integral parts of the item. In all
other cases, such defense articles are subject to the ITAR. For
example, a 9A515.a ``spacecraft'' remains ``subject to the EAR''
even when it is exported, reexported, or transferred (in-country)
with a ``hosted payload'' described in USML Category XV(e)(17)
incorporated therein. In all other cases, a ``hosted payload''
performing a function described in USML Category XV(a) always
remains a USML item. The removal of the defense article subject to
the ITAR from the spacecraft is a retransfer under the ITAR and
would require an ITAR authorization, regardless of the CCL
authorization the spacecraft is exported under. Additionally,
transfer of technical data regarding the defense article subject to
the ITAR integrated into the spacecraft would require an ITAR
authorization.
a. ``Spacecraft,'' including satellites, and space vehicles,
whether designated developmental, experimental, research or
scientific, not enumerated in USML Category XV or described in ECCN
9A004.u or .w, that:
a.1. Have electro-optical remote sensing capabilities and having
a clear aperture greater than 0.35 meters, but less than or equal to
0.50 meters;
a.2. Have remote sensing capabilities beyond NIR (i.e., SWIR,
MWIR, or LWIR);
a.3. Have radar remote sensing capabilities (e.g., AESA, SAR, or
ISAR) having a center frequency equal to or greater than 1.0 GHz,
but less than 10.0 GHz and having a bandwidth equal to or greater
than 100 MHz, but less than 300 MHz;
a.4. Provide space-based logistics, assembly, or servicing of
another ``spacecraft''; or
a.5. Are not described in ECCN 9A515.a.1, .a.2, .a.3 or .a.4.
Note: ECCN 9A515.a includes commercial communications
satellites, remote sensing satellites, planetary rovers, planetary
and interplanetary probes, and in-space habitats, not identified in
ECCN 9A004 or USML Category XV(a).
b. Ground control systems and training simulators ``specially
designed'' for telemetry, tracking, and control of the
``spacecraft'' controlled in paragraphs 9A004.u or 9A515.a.
c. [Reserved]
d. Microelectronic circuits (e.g., integrated circuits,
microcircuits, or MOSFETs) and discrete electronic components rated,
certified, or otherwise specified or described as meeting or
exceeding all the following characteristics and that are ``specially
designed'' for defense articles, ``600 series'' items, or items
controlled by ECCNs 9A004.v or 9A515:
d.1. A total dose of 5 x 10\5\ Rads (Si) (5 x 10\3\ Gy (Si));
d.2. A dose rate upset threshold of 5 x 10\8\ Rads (Si)/sec (5 x
10\6\ Gy (Si)/sec);
d.3. A neutron dose of 1 x 10\14\ n/cm\2\ (1 MeV equivalent);
d.4. An uncorrected single event upset sensitivity of 1 x
10-\10\ errors/bit/day or less, for the CR[Egrave]ME-MC
geosynchronous orbit, Solar Minimum Environment for heavy ion flux;
and
d.5. An uncorrected single event upset sensitivity of 1 x
10-\3\ errors/part or less for a fluence of 1 x 10\7\
protons/cm\2\ for proton energy greater than 50 MeV.
e. Microelectronic circuits (e.g., integrated circuits,
microcircuits, or MOSFETs) and discrete electronic components that
are rated, certified, or otherwise specified or described as meeting
or exceeding the characteristics in either paragraph e.1 or e.2, AND
``specially designed'' for defense articles controlled by USML
Category XV or items controlled by ECCNs 9A004.u or 9A515:
e.1. A total dose >=1 x 10\5\ Rads (Si) (1 x 10\3\ Gy(Si)) and
<5 x 10\5\ Rads (Si) (5 x 10\3\ Gy(Si)); and a single event effect
(SEE) (i.e., single event latchup (SEL), single event burnout (SEB),
or single event gate rupture (SEGR)) immunity to a linear energy
transfer (LET) >=80 MeV-cm2/mg; or
e.2. A total dose >= 5 x 10\5\ Rads (Si) (5 x 10\3\ Gy (Si)) and
not described in 9A515.d.
Note 1 to 9A515.d and .e: Application specific integrated
circuits (ASICs), integrated circuits developed and produced for a
specific application or function, specifically designed or modified
for defense articles and not in normal commercial use are controlled
by Category XI(c) of the USML regardless of characteristics.
Note 2 to 9A515.d and .e: See 3A001.a for controls on
radiation-hardened microelectronic circuits ``subject to the EAR''
that are not controlled by 9A515.d or 9A515.e
.f. Pressure suits (i.e., space suits) capable of operating at
altitudes 55,000 feet above sea level.
g. Remote sensing components ``specially designed'' for
``spacecraft'' described in ECCNs 9A515.a.1 through 9A515.a.4 as
follows:
g.1. Space-qualified optics (i.e., lens, mirror, membrane having
active properties (e.g., adaptive, deformable)) with the largest
lateral clear aperture dimension equal to or less than 0.35 meters;
or with the largest clear aperture dimension greater than 0.35
meters but less than or equal to 0.50 meters;
g.2. Optical bench assemblies ``specially designed'' for ECCN
9A515.a.1, 9A515.a.2, 9A515.a.3, or 9A515.a.4 ``spacecraft;'' or
g.3. Primary, secondary, or hosted payloads that perform a
function of ECCN 9A515.a.1, 9A515.a.2, 9A515.a.3, or 9A515.a.4
``spacecraft.''
h. Spacecraft thrusters using bi-propellants or mono-propellants
that provide thrust equal to or less than 150 lbf (i.e., 667.23 N)
vacuum thrust.
i. through w. [RESERVED]
x. ``Parts,'' ``components,'' ``accessories'' and
``attachments'' that are ``specially designed'' for defense articles
controlled by USML Category XV or items controlled by 9A515, and
that are NOT:
x.1. Enumerated or controlled in the USML or elsewhere within
ECCNs 9A515 or 9A004;
x.2. Microelectronic circuits and discrete electronic
components;
x.3. Described in ECCNs 7A004 or 7A104;
x.4. Described in an ECCN containing ``space-qualified'' as a
control criterion (i.e., 3A001.b.1, 3A001.e.4, 3A002.g.1, 3A991.o,
3A992.b.3, 6A002.a.1, 6A002.b.2, 6A002.d.1, 6A004.c and .d,
6A008.j.1, 6A998.b, or 7A003.d.2);
x.5. Microwave solid state amplifiers and microwave assemblies
(refer to ECCN 3A001.b.4 for controls on these items);
x.6. Travelling wave tube amplifiers (refer to ECCN 3A001.b.8
for controls on these items); or
x.7. Elsewhere specified in ECCN 9A515.y.
Note to 9A515.x: ``Parts,'' ``components,'' ``accessories,''
and ``attachments'' specified in USML subcategory XV(e) or
enumerated in other USML categories are subject to the controls of
that paragraph or category.
y. Items that would otherwise be within the scope of ECCN
9A515.x but that have been identified in an interagency-cleared
commodity classification (CCATS) pursuant to Sec. 748.3(e) as
warranting control in 9A515.y.
y.1. Discrete electronic components not specified in 9A515.e;
y.2. Space grade or for spacecraft applications thermistors;
y.3. Space grade or for spacecraft applications RF microwave
bandpass ceramic filters (Dielectric Resonator Bandpass Filters);
y.4. Space grade or for spacecraft applications hall effect
sensors;
y.5. Space grade or for spacecraft applications subminiature
(SMA and SMP) plugs and connectors, TNC plugs and cable and
connector assemblies with SMA plugs and connectors; and
y.6. Space grade or for spacecraft applications flight cable
assemblies.
0
18. In Supplement No. 1 to part 774, Category 9, revise ECCN 9A610 to
read as follows:
9A610 Military aircraft and related commodities, other than those
enumerated in 9A991.a (see List of Items Controlled).
License Requirements
Reason for Control: NS, RS, MT, AT, UN
[[Page 44227]]
Country chart (see Supp. No.
Control(s) 1 to part 738)
NS applies to entire entry except: NS Column 1
9A610.b; parts and components controlled
in 9A610.x if being exported or
reexported for use in an aircraft
controlled in 9A610.b; and 9A610.y.
RS applies to entire entry except: RS Column 1
9A610.b; parts and components controlled
in 9A610.x if being exported or
reexported for use in an aircraft
controlled in 9A610.b; and 9A610.y.
MT applies to 9A610.t, .u, .v, and .w..... MT Column 1
AT applies to entire entry................ AT Column 1
UN applies to entire entry except 9A610.y. See Sec. 746.1(b) for UN
controls
List Based License Exceptions (See Part 740 for a Description of All
License Exceptions)
LVS: $1500
GBS: N/A
CIV: N/A
Special Conditions for STA
STA: (1) Paragraph (c)(1) of License Exception STA (Sec.
740.20(c)(1) of the EAR) may not be used for any item in 9A610.a
(i.e., ``end item'' military aircraft), unless determined by BIS to
be eligible for License Exception STA in accordance with Sec.
740.20(g) (License Exception STA eligibility requests for ``600
series'' end items). (2) Paragraph (c)(2) of License Exception STA
(Sec. 740.20(c)(2) of the EAR) may not be used for any item in
9A610.
List of Items Controlled
Related Controls: (1) Military aircraft and related articles that
are enumerated in USML Category VIII, and technical data (including
software) directly related thereto, are subject to the ITAR. (2) See
ECCN 0A919 for controls on foreign-made ``military commodities''
that incorporate more than a de minimis amount of U.S.-origin ``600
series'' controlled content. (3) See USML Category XIX and ECCN
9A619 for controls on military aircraft gas turbine engines and
related items.
Related Definitions: In paragraph .y of this entry, the term `fluid'
includes liquids and gases.
Items:
a. `Military Aircraft' ``specially designed'' for a military use
that are not enumerated in USML paragraph VIII(a).
Note 1: For purposes of paragraph .a the term `military
aircraft' means the LM-100J aircraft and any aircraft ``specially
designed'' for a military use that are not enumerated in USML
paragraph VIII(a). The term includes: Trainer aircraft; cargo
aircraft; utility fixed wing aircraft; military helicopters;
observation aircraft; military non-expansive balloons and other
lighter than air aircraft; and unarmed military aircraft, regardless
of origin or designation. Aircraft with modifications made to
incorporate safety of flight features or other FAA or NTSB
modifications such as transponders and air data recorders are
``unmodified'' for the purposes of this paragraph .a.
Note 2: 9A610.a does not control `military aircraft' that:
a. Were first manufactured before 1946;
b. Do not incorporate defense articles enumerated or otherwise
described on the U.S. Munitions List, unless the items are required
to meet safety or airworthiness standards of a Wassenaar Arrangement
Participating State; and
c. Do not incorporate weapons enumerated or otherwise described
on the U.S. Munitions List, unless inoperable and incapable of being
returned to operation.
b. L-100 aircraft manufactured prior to 2013.
c.-d. [Reserved]
e. Mobile aircraft arresting and engagement runway systems for
aircraft controlled by either USML Category VIII(a) or ECCN 9A610.a.
f. Pressure refueling equipment and equipment that facilitates
operations in confined areas, ``specially designed'' for aircraft
controlled by either USML paragraph VIII(a) or ECCN 9A610.a.
g. Aircrew life support equipment, aircrew safety equipment and
other devices for emergency escape from aircraft controlled by
either USML paragraph VIII(a) or ECCN 9A610.a.
h. Parachutes, paragliders, complete parachute canopies,
harnesses, platforms, electronic release mechanisms, ``specially
designed'' for use with aircraft controlled by either USML paragraph
VIII(a) or ECCN 9A610.a, and ``equipment'' ``specially designed''
for military high altitude parachutists, such as suits, special
helmets, breathing systems, and navigation equipment.
i. Controlled opening equipment or automatic piloting systems,
designed for parachuted loads.
j. Ground effect machines (GEMS), including surface effect
machines and air cushion vehicles, ``specially designed'' for use by
a military.
k. through s. [Reserved]
t. Composite structures, laminates, and manufactures thereof
``specially designed'' for unmanned aerial vehicles controlled under
USML Category VIII(a) with a range equal to or greater than 300 km.
Note to paragraph .t: Composite structures, laminates, and
manufactures thereof ``specially designed'' for unmanned aerial
vehicles controlled under USML Category VIII(a) with a maximum range
less than 300 km are controlled in paragraph .x of this entry.
u. Apparatus and devices ``specially designed'' for the
handling, control, activation and non-ship-based launching of UAVs
controlled by either USML paragraph VIII(a) or ECCN 9A610.a, and
capable of a range equal to or greater than 300 km.
Note to paragraph .u: Apparatus and devices ``specially
designed'' for the handling, control, activation and non-ship-based
launching of UAVs controlled by either USML paragraph VIII(a) or
ECCN 9A610.a with a maximum range less than 300 km are controlled in
paragraph .x of this entry.
v. Radar altimeters designed or modified for use in UAVs
controlled by either USML paragraph VIII(a) or ECCN 9A610.a., and
capable of delivering at least 500 kilograms payload to a range of
at least 300 km.
Note to paragraph .v: Radar altimeters designed or modified for
use in UAVs controlled by either USML paragraph VIII(a) or ECCN
9A610.a. that are not capable of delivering at least 500 kilograms
payload to a range of at least 300 km are controlled in paragraph .x
of this entry.
w.1. Pneumatic hydraulic, mechanical, electro-optical, or
electromechanical flight control systems (including fly-by-wire and
fly-by-light systems) and attitude control equipment designed or
modified for UAVs controlled by either USML paragraph VIII(a) or
ECCN 9A610.a., and capable of delivering at least 500 kilograms
payload to a range of at least 300 km.
Note to paragraph .w.1: Pneumatic, hydraulic, mechanical,
electro-optical, or electromechanical flight control systems
(including fly-by-wire and fly-by-light systems) and attitude
control equipment designed or modified for UAVs controlled by either
USML paragraph VIII(a) or ECCN 9A610.a., not capable of delivering
at least 500 kilograms payload to a range of at least 300 km are
controlled in paragraph .x of this entry.
w.2. Flight control servo valves designed or modified for the
systems in 9A610.w.1. and designed or modified to operate in a
vibration environment greater than 10g rms over the entire range
between 20Hz and 2 kHz.
Note to paragraph .w: Paragraphs 9A610.w.1. and 9A610.w.2.
include the systems, equipment and valves designed or modified to
enable operation of manned aircraft as unmanned aerial vehicles.
x. ``Parts,'' ``components,'' ``accessories,'' and
``attachments'' that are ``specially designed'' for a commodity
enumerated or otherwise described in ECCN 9A610 (except for 9A610.y)
or a defense article enumerated or otherwise described in USML
Category VIII and not elsewhere specified on the USML or in 9A610.y,
9A619.y, or 3A611.y.
y. Specific ``parts,'' ``components,'' ``accessories,'' and
``attachments'' ``specially designed'' for a commodity subject to
control in this entry, ECCN 9A619, or for a defense article in USML
Categories VIII or XIX and not elsewhere specified in the USML or
the CCL, and other aircraft commodities ``specially designed'' for a
military use, as follows, and ``parts,'' ``components,''
``accessories,'' and ``attachments'' ``specially designed''
therefor:
y.1. Aircraft tires;
y.2. Analog gauges and indicators;
[[Page 44228]]
y.3. Audio selector panels;
y.4. Check valves for hydraulic and pneumatic systems;
y.5. Crew rest equipment;
y.6. Ejection seat mounted survival aids;
y.7. Energy dissipating pads for cargo (for pads made from paper
or cardboard);
y.8. Fluid filters and filter assemblies;
y.9. Galleys;
y.10. Fluid hoses, straight and unbent lines (for a commodity
subject to control in this entry or defense article in USML Category
VIII), and fittings, couplings, clamps (for a commodity subject to
control in this entry or defense article in USML Category VIII) and
brackets therefor;
y.11. Lavatories;
y.12. Life rafts;
y.13. Magnetic compass, magnetic azimuth detector;
y.14. Medical litter provisions;
y.15. Cockpit or cabin mirrors;
y.16. Passenger seats including palletized seats;
y.17. Potable water storage systems;
y.18. Public address (PA) systems;
y.19. Steel brake wear pads (does not include sintered mix or
carbon/carbon materials);
y.20. Underwater locator beacons;
y.21. Urine collection bags/pads/cups/pumps;
y.22. Windshield washer and wiper systems;
y.23. Filtered and unfiltered panel knobs, indicators, switches,
buttons, and dials;
y.24. Lead-acid and Nickel-Cadmium batteries;
y.25. Propellers, propeller systems, and propeller blades used
with reciprocating engines;
y.26. Fire extinguishers;
y.27. Flame and smoke/CO2 detectors;
y.28. Map cases;
y.29. `Military Aircraft' that were first manufactured from 1946
to 1955 that do not incorporate defense articles enumerated or
otherwise described on the U.S. Munitions List, unless the items are
required to meet safety or airworthiness standards of a Wassenaar
Arrangement Participating State; and do not incorporate weapons
enumerated or otherwise described on the U.S. Munitions List, unless
inoperable and incapable of being returned to operation;
y.30. ``Parts,'' ``components,'' ``accessories,'' and
``attachments,'' other than electronic items or navigation
equipment, for use in or with a commodity controlled by ECCN
9A610.h;
y.31. Identification plates and nameplates; and
y.32. Fluid manifolds.
Dated: August 24, 2018.
Richard E. Ashooh,
Assistant Secretary for Export Administration.
[FR Doc. 2018-18849 Filed 8-29-18; 8:45 am]
BILLING CODE 3510-33-P