[Title 40 CFR 185.1300]
[Code of Federal Regulations (annual edition) - July 1, 1996 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY--(Continued)]
[Subchapter E - PESTICIDE PROGRAMS]
[Part 185 - TOLERANCES FOR PESTICIDES IN FOOD]
[Subpart B - Food Additives Permitted in Food for Human Consumption]
[Sec. 185.1300 - Cyano(3-phenoxyphenyl)methyl-4-chloro-alpha-(1-methylethyl)benzeneacetate and its S,S isomer.]
[From the U.S. Government Publishing Office]
40
PROTECTION OF ENVIRONMENT
11
1996-07-01
1996-07-01
false
Cyano(3-phenoxyphenyl)methyl-4-chloro-alpha-(1-methylethyl)benzeneacetate and its S,S isomer.
185.1300
Sec. 185.1300
PROTECTION OF ENVIRONMENT
ENVIRONMENTAL PROTECTION AGENCY--(Continued)
PESTICIDE PROGRAMS
TOLERANCES FOR PESTICIDES IN FOOD
Food Additives Permitted in Food for Human Consumption
Sec. 185.1300 Cyano(3-phenoxyphenyl)methyl-4-chloro-alpha-(1-methylethyl)benzeneacetate and its S,S isomer.
(a) A food additive tolerance of 0.05 part per million is
established for residues of the insecticide cyano(3-
phenoxyphenyl)methyl-4-chloro-alpha-(1-methylethyl)benzeneacetate and an
isomer, (S)-cyano(3-phenoxyphenyl)methyl-(S)-4-chloro-alpha-(1-
methylethyl)-benzeneacetate, as follows:
(1) In or on all food items (other than those already covered by a
higher tolerance as a result of use on growing crops) in food-handling
establishments where food products are held, processed, or prepared.
(2) Application of cyano(3-phenoxyphenyl)methyl-4-chloro-alpha-(1-
methylethyl)benzeneacetate shall be limited to space treatment with a
maximum of 0.5 fluid ounce of a 0.05-percent active ingredient solution
per 1,000 cubic feet of space, or as a contact spray applied as a coarse
wet spray at a maximum of 1 gallon of a 0.2-percent active ingredient
solution per 1,000 square feet of surface. Food must be removed or
covered during treatment. Spray should not be applied directly to
surfaces or utensils that may come into contact with food. Food-contact
surfaces and equipment should be thoroughly cleaned with an effective
cleaning compound and rinsed with potable water before using.
(3) Application of (S)-cyano(3-phenoxyphenyl) methyl-(S)-4-chloro-
alpha-(1-methylethyl)benzeneacetate shall be limited to space treatment
with a maximum of 1.0 fluid ounce of a 0.25-percent active ingredient
solution per 1,000 cubic feet of space, or as a contact spray applied as
a coarse wet spray at a maximum of 1 gallon of a 0.05-percent active
ingredient solution per 1,000 square feet of surface, or as a
pressurized spot/crack and crevice spray of a 0.25-percent solution.
Food must be removed or covered during treatment. Spray should not be
applied
[[Page 491]]
directly to surfaces or utensils that may come into contact with food.
Food-contact surfaces and equipment should be throroughly cleaned with
an effective cleaning compound and rinsed with potable water before
using.
(4) To assure safe use of the additive, its label and labeling shall
conform to that registered with the U.S. Environmental Protection
Agency, and it shall be used in accordance with such label and labeling.
(b) [Reserved]
[55 FR 26442, June 28, 1990]