[Title 49 CFR ]
[Code of Federal Regulations (annual edition) - October 1, 2005 Edition]
[From the U.S. Government Printing Office]
[[Page i]]
49
Parts 100 to 185
Revised as of October 1, 2005
Transportation
________________________
Containing a codification of documents of general
applicability and future effect
As of October 1, 2005
With Ancillaries
Published by
Office of the Federal Register
National Archives and Records
Administration
A Special Edition of the Federal Register
[[Page ii]]
U.S. GOVERNMENT OFFICIAL EDITION NOTICE
Legal Status and Use of Seals and Logos
The seal of the National Archives and Records Administration
(NARA) authenticates the Code of Federal Regulations (CFR) as
the official codification of Federal regulations established
under the Federal Register Act. Under the provisions of 44
U.S.C. 1507, the contents of the CFR, a special edition of the
Federal Register, shall be judicially noticed. The CFR is
prima facie evidence of the original documents published in
the Federal Register (44 U.S.C. 1510).
It is prohibited to use NARA's official seal and the stylized Code
of Federal Regulations logo on any republication of this
material without the express, written permission of the
Archivist of the United States or the Archivist's designee.
Any person using NARA's official seals and logos in a manner
inconsistent with the provisions of 36 CFR part 1200 is
subject to the penalties specified in 18 U.S.C. 506, 701, and
1017.
Use of ISBN Prefix
This is the Official U.S. Government edition of this publication
and is herein identified to certify its authenticity. Use of
the 0-16 ISBN prefix is for U.S. Government Printing Office
Official Editions only. The Superintendent of Documents of the
U.S. Government Printing Office requests that any reprinted
edition clearly be labeled as a copy of the authentic work
with a new ISBN.
U . S . G O V E R N M E N T P R I N T I N G O F F I C E
------------------------------------------------------------------
U.S. Superintendent of Documents Washington, DC
20402-0001
http://bookstore.gpo.gov
Phone: toll-free (866) 512-1800; DC area (202) 512-1800
[[Page iii]]
Table of Contents
Page
Explanation................................................. v
Title 49:
Subtitle B--Other Regulations Relating to Transportation
Chapter I--Pipeline and Hazardous Materials Safety
Administration, Department of Transportation 5
Finding Aids:
Material Approved for Incorporation by Reference........ 1139
Table of CFR Titles and Chapters........................ 1151
Alphabetical List of Agencies Appearing in the CFR...... 1169
List of CFR Sections Affected........................... 1179
[[Page iv]]
----------------------------
Cite this Code: CFR
To cite the regulations in
this volume use title,
part and section number.
Thus, 49 CFR 105.5 refers
to title 49, part 105,
section 5.
----------------------------
[[Page v]]
EXPLANATION
The Code of Federal Regulations is a codification of the general and
permanent rules published in the Federal Register by the Executive
departments and agencies of the Federal Government. The Code is divided
into 50 titles which represent broad areas subject to Federal
regulation. Each title is divided into chapters which usually bear the
name of the issuing agency. Each chapter is further subdivided into
parts covering specific regulatory areas.
Each volume of the Code is revised at least once each calendar year
and issued on a quarterly basis approximately as follows:
Title 1 through Title 16.................................as of January 1
Title 17 through Title 27..................................as of April 1
Title 28 through Title 41...................................as of July 1
Title 42 through Title 50................................as of October 1
The appropriate revision date is printed on the cover of each
volume.
LEGAL STATUS
The contents of the Federal Register are required to be judicially
noticed (44 U.S.C. 1507). The Code of Federal Regulations is prima facie
evidence of the text of the original documents (44 U.S.C. 1510).
HOW TO USE THE CODE OF FEDERAL REGULATIONS
The Code of Federal Regulations is kept up to date by the individual
issues of the Federal Register. These two publications must be used
together to determine the latest version of any given rule.
To determine whether a Code volume has been amended since its
revision date (in this case, October 1, 2005), consult the ``List of CFR
Sections Affected (LSA),'' which is issued monthly, and the ``Cumulative
List of Parts Affected,'' which appears in the Reader Aids section of
the daily Federal Register. These two lists will identify the Federal
Register page number of the latest amendment of any given rule.
EFFECTIVE AND EXPIRATION DATES
Each volume of the Code contains amendments published in the Federal
Register since the last revision of that volume of the Code. Source
citations for the regulations are referred to by volume number and page
number of the Federal Register and date of publication. Publication
dates and effective dates are usually not the same and care must be
exercised by the user in determining the actual effective date. In
instances where the effective date is beyond the cut-off date for the
Code a note has been inserted to reflect the future effective date. In
those instances where a regulation published in the Federal Register
states a date certain for expiration, an appropriate note will be
inserted following the text.
OMB CONTROL NUMBERS
The Paperwork Reduction Act of 1980 (Pub. L. 96-511) requires
Federal agencies to display an OMB control number with their information
collection request.
[[Page vi]]
Many agencies have begun publishing numerous OMB control numbers as
amendments to existing regulations in the CFR. These OMB numbers are
placed as close as possible to the applicable recordkeeping or reporting
requirements.
OBSOLETE PROVISIONS
Provisions that become obsolete before the revision date stated on
the cover of each volume are not carried. Code users may find the text
of provisions in effect on a given date in the past by using the
appropriate numerical list of sections affected. For the period before
January 1, 2001, consult either the List of CFR Sections Affected, 1949-
1963, 1964-1972, 1973-1985, or 1986-2000, published in 11 separate
volumes. For the period beginning January 1, 2001, a ``List of CFR
Sections Affected'' is published at the end of each CFR volume.
INCORPORATION BY REFERENCE
What is incorporation by reference? Incorporation by reference was
established by statute and allows Federal agencies to meet the
requirement to publish regulations in the Federal Register by referring
to materials already published elsewhere. For an incorporation to be
valid, the Director of the Federal Register must approve it. The legal
effect of incorporation by reference is that the material is treated as
if it were published in full in the Federal Register (5 U.S.C. 552(a)).
This material, like any other properly issued regulation, has the force
of law.
What is a proper incorporation by reference? The Director of the
Federal Register will approve an incorporation by reference only when
the requirements of 1 CFR part 51 are met. Some of the elements on which
approval is based are:
(a) The incorporation will substantially reduce the volume of
material published in the Federal Register.
(b) The matter incorporated is in fact available to the extent
necessary to afford fairness and uniformity in the administrative
process.
(c) The incorporating document is drafted and submitted for
publication in accordance with 1 CFR part 51.
Properly approved incorporations by reference in this volume are
listed in the Finding Aids at the end of this volume.
What if the material incorporated by reference cannot be found? If
you have any problem locating or obtaining a copy of material listed in
the Finding Aids of this volume as an approved incorporation by
reference, please contact the agency that issued the regulation
containing that incorporation. If, after contacting the agency, you find
the material is not available, please notify the Director of the Federal
Register, National Archives and Records Administration, Washington DC
20408, or call 202-741-6010.
CFR INDEXES AND TABULAR GUIDES
A subject index to the Code of Federal Regulations is contained in a
separate volume, revised annually as of January 1, entitled CFR Index
and Finding Aids. This volume contains the Parallel Table of Statutory
Authorities and Agency Rules (Table I). A list of CFR titles, chapters,
and parts and an alphabetical list of agencies publishing in the CFR are
also included in this volume.
An index to the text of ``Title 3--The President'' is carried within
that volume.
The Federal Register Index is issued monthly in cumulative form.
This index is based on a consolidation of the ``Contents'' entries in
the daily Federal Register.
A List of CFR Sections Affected (LSA) is published monthly, keyed to
the revision dates of the 50 CFR titles.
[[Page vii]]
REPUBLICATION OF MATERIAL
There are no restrictions on the republication of textual material
appearing in the Code of Federal Regulations.
INQUIRIES
For a legal interpretation or explanation of any regulation in this
volume, contact the issuing agency. The issuing agency's name appears at
the top of odd-numbered pages.
For inquiries concerning CFR reference assistance, call 202-741-6000
or write to the Director, Office of the Federal Register, National
Archives and Records Administration, Washington, DC 20408 or e-mail,
[email protected].
SALES
The Government Printing Office (GPO) processes all sales and
distribution of the CFR. For payment by credit card, call toll-free,
866-512-1800 or DC area, 202-512-1800, M-F, 8 a.m. to 4 p.m. e.s.t. or
fax your order to 202-512-2250, 24 hours a day. For payment by check,
write to the Superintendent of Documents, Attn: New Orders, P.O. Box
371954, Pittsburgh, PA 15250-7954. For GPO Customer Service call 202-
512-1803.
ELECTRONIC SERVICES
The full text of the Code of Federal Regulations, the LSA (List of
CFR Sections Affected), The United States Government Manual, the Federal
Register, Public Laws, Public Papers, Weekly Compilation of Presidential
Documents and the Privacy Act Compilation are available in electronic
format at www.gpoaccess.gov/nara (``GPO Access''). For more information,
contact Electronic Information Dissemination Services, U.S. Government
Printing Office. Phone 202-512-1530, or 888-293-6498 (toll-free). E-
mail, [email protected].
The Office of the Federal Register also offers a free service on the
National Archives and Records Administration's (NARA) World Wide Web
site for public law numbers, Federal Register finding aids, and related
information. Connect to NARA's web site at www.archives.gov/federal--
register. The NARA site also contains links to GPO Access.
Raymond A. Mosley,
Director,
Office of the Federal Register.
October 1, 2005.
[[Page ix]]
THIS TITLE
Title 49--Transportation is composed of nine volumes. The parts in
these volumes are arranged in the following order: Parts 1-99, parts
100-185, parts 186-199, parts 200-299, parts 300-399, parts 400-599,
parts 600-999, parts 1000-1199, part 1200 to End. The first volume
(parts 1-99) contains current regulations issued under subtitle A--
Office of the Secretary of Transportation; the second volume (parts 100-
185) and the third volume (parts 186-199) contain the current
regulations issued under chapter I--Pipeline and Hazardous Materials
Safety Administration (DOT); the fourth volume (parts 200-299) contains
the current regulations issued under chapter II--Federal Railroad
Administration (DOT); the fifth volume (parts 300-399) contains the
current regulations issued under chapter III--Federal Motor Carrier
Safety Administration (DOT); the sixth volume (parts 400-599) contains
the current regulations issued under chapter IV--Coast Guard (DHS),
chapter V--National Highway Traffic Safety Administration (DOT); the
seventh volume (parts 600-999) contains the current regulations issued
under chapter VI--Federal Transit Administration (DOT), chapter VII--
National Railroad Passenger Corporation (AMTRAK), and chapter VIII--
National Transportation Safety Board; the eighth volume (parts 1000-
1199) contains the current regulations issued under chapter X--Surface
Transportation Board and the ninth volume (part 1200 to End) contains
the current regulations issued under chapter X--Surface Transportation
Board, chapter XI--Research and Innovative Technology Administration,
and chapter XII--Transportation Security Administration, Department of
Transportation. The contents of these volumes represent all current
regulations codified under this title of the CFR as of October 1, 2005.
In the volume containing parts 100-185, see Sec. 172.101 for the
Hazardous Materials Table. The Federal Motor Vehicle Safety Standards
appear in part 571.
For this volume, Bonnie Fritts was Chief Editor. The Code of Federal
Regulations publication program is under the direction of Frances D.
McDonald, assisted by Alomha S. Morris.
[[Page 1]]
TITLE 49--TRANSPORTATION
(This book contains parts 100 to 185)
--------------------------------------------------------------------
SUBTITLE B--Other Regulations Relating To Transportation
Part
chapter i--Pipeline and Hazardous Materials Safety
Administration, Department of Transportation.............. 105
[[Page 3]]
Subtitle B--Other Regulations Relating to Transportation
[[Page 5]]
CHAPTER I--PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION,
DEPARTMENT OF TRANSPORTATION
--------------------------------------------------------------------
SUBCHAPTER A--HAZARDOUS MATERIALS AND OIL TRANSPORTATION
Part Page
105 Hazardous Materials Program definitions and
general procedures...................... 7
106 Rulemaking procedures....................... 12
107 Hazardous materials program procedures...... 18
110 Hazardous materials public sector training
and planning grants..................... 63
SUBCHAPTER B--OIL TRANSPORTATION
130 Oil spill prevention and response plans..... 71
SUBCHAPTER C--HAZARDOUS MATERIALS REGULATIONS
171 General information, regulations, and
definitions............................. 74
172 Hazardous materials table, special
provisions, hazardous materials
communications, emergency response
information, and training requirements.. 115
173 Shippers--general requirements for shipments
and packagings.......................... 415
174 Carriage by rail............................ 672
175 Carriage by aircraft........................ 697
176 Carriage by vessel.......................... 717
177 Carriage by public highway.................. 778
178 Specifications for packagings............... 800
179 Specifications for tank cars................ 1028
180 Continuing qualification and maintenance of
packagings.............................. 1085
181-185 [Reserved]
[[Page 7]]
SUBCHAPTER A_HAZARDOUS MATERIALS AND OIL TRANSPORTATION
PART 105_HAZARDOUS MATERIALS PROGRAM DEFINITIONS AND GENERAL PROCEDURES
--Table of Contents
Subpart A_Definitions
Sec.
105.5 Definitions.
Subpart B_General Procedures
105.15 Defined terms used in this subpart.
Obtaining Guidance and Public Information
105.20 Guidance and interpretations.
105.25 Reviewing public documents.
105.26 Obtaining records on file with PHMSA.
105.30 Information made available to the public and request for
confidential treatment.
Serving Documents
105.35 Serving documents in PHMSA proceedings.
105.40 Designated agents for non-residents.
Subpoenas
105.45 Issuing a subpoena.
105.50 Serving a subpoena.
105.55 Refusal to obey a subpoena.
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Source: 67 FR 42951, June 25, 2002, unless otherwise noted.
Editorial Note: Nomenclature changes to part 105 appear at 70 FR
56087, Sept. 23, 2005.
Subpart A_Definitions
Sec. 105.5 Definitions.
(a) This part contains the definitions for certain words and phrases
used throughout this subchapter (49 CFR parts 105 through 110). At the
beginning of each subpart, the Pipeline and Hazardous Materials Safety
Administration (``PHMSA'' or ``we'') will identify the defined terms
that are used within the subpart--by listing them--and refer the reader
to the definitions in this part. This way, readers will know that PHMSA
has given a term a precise meaning and will know where to look for it.
(b) Terms used in this part are defined as follows:
Associate Administrator means Associate Administrator for Hazardous
Materials Safety, Pipeline and Hazardous Materials Safety
Administration.
Approval means written consent, including a competent authority
approval, from the Associate Administrator or other designated
Department official, to perform a function that requires prior consent
under subchapter C of this chapter (49 CFR parts 171 through 180).
Competent Authority means a national agency that is responsible,
under its national law, for the control or regulation of some aspect of
hazardous materials (dangerous goods) transportation. Another term for
Competent Authority is ``Appropriate authority'' which is used in the
International Civil Aviation Organization's (ICAO) Technical
Instructions for the Safe Transport of Dangerous Goods by Air. The
Associate Administrator is the United States Competent Authority for
purposes of 49 CFR part 107.
Competent Authority Approval means an approval by the competent
authority that is required under an international standard (for example,
the ICAO Technical Instructions for the Safe Transport of Dangerous
Goods by Air and the International Maritime Dangerous Goods Code). Any
of the following may be considered a competent authority approval if it
satisfies the requirement of an international standard:
(1) A specific regulation in subchapter A or C of this chapter.
(2) An exemption or approval issued under subchapter A or C of this
chapter.
(3) A separate document issued to one or more persons by the
Associate Administrator.
Exemption means a document issued by the Associate Administrator
under the authority of 49 U.S.C. 5117. The document permits a person to
perform a function that is not otherwise permitted under subchapter A or
C of this chapter, or other regulations issued
[[Page 8]]
under 49 U.S.C. 5101 et seq. (e.g., Federal Motor Carrier Safety routing
requirements.)
Federal hazardous material transportation law means 49 U.S.C. 5101
et seq.
File or Filed means received by the appropriate PHMSA or other
designated office within the time specified in a regulation or
rulemaking document.
Hazardous material means a substance or material that the Secretary
of Transportation has determined is capable of posing an unreasonable
risk to health, safety, and property when transported in commerce, and
has designated as hazardous under section 5103 of Federal hazardous
materials transportation law (49 U.S.C. 5103). The term includes
hazardous substances, hazardous wastes, marine pollutants, elevated
temperature materials, materials designated as hazardous in the
Hazardous Materials Table (see 49 CFR 172.101), and materials that meet
the defining criteria for hazard classes and divisions in part 173 of
subchapter C of this chapter.
Hazardous Materials Regulations or HMR means the regulations at 49
CFR parts 171 through 180.
Indian tribe has the same meaning given that term in section 4 of
the Indian Self-Determination and Education Assistance Act (25 U.S.C.
450b).
Person means an individual, firm, copartnership, corporation,
company, association, or joint-stock association (including any trustee,
receiver, assignee, or similar representative); or a government or
Indian tribe (or an agency or instrumentality of any government or
Indian tribe) that transports a hazardous material to further a
commercial enterprise or offers a hazardous material for transportation
in commerce. Person does not include the following:
(1) The United States Postal Service.
(2) Any agency or instrumentality of the Federal government, for the
purposes of 49 U.S.C. 5123 (civil penalties) and 5124 (criminal
penalties).
(3) Any government or Indian tribe (or an agency or instrumentality
of any government or Indian tribe) that transports hazardous material
for a governmental purpose.
Political subdivision means a municipality; a public agency or other
instrumentality of one or more States, municipalities, or other
political body of a State; or a public corporation, board, or commission
established under the laws of one or more States.
Preemption determination means an administrative decision by the
Associate Administrator that Federal hazardous materials law does or
does not void a specific State, political subdivision, or Indian tribe
requirement.
Regulations issued under Federal hazardous material transportation
law include this subchapter A (parts 105-110) and subchapter C (parts
171-180) of this chapter, certain regulations in chapter I (United
States Coast Guard) of title 46, Code of Federal Regulations, and in
chapters III (Federal Motor Carrier Safety Administration) and XII
(Transportation Security Administration) of subtitle B of this title, as
indicated by the authority citations therein.
State means a State of the United States, the District of Columbia,
the Commonwealth of Puerto Rico, the Commonwealth of the Northern
Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other
territory or possession of the United States designated by the
Secretary.
Transports or Transportation means the movement of property and
loading, unloading, or storage incidental to the movement.
Waiver of Preemption means a decision by the Associate Administrator
to forego preemption of a non-Federal requirement--that is, to allow a
State, political subdivision or Indian tribe requirement to remain in
effect. The non-Federal requirement must provide at least as much public
protection as the Federal hazardous materials transportation law and the
regulations issued under Federal hazardous materials transportation law,
and may not unreasonably burden commerce.
[67 FR 42951, June 25, 2002, as amended at 68 FR 52846, Sept. 8, 2003;
70 FR 56087, Sept. 23, 2005]
[[Page 9]]
Subpart B_General Procedures
Sec. 105.15 Defined terms used in this subpart.
The following defined terms (see subpart A of this part) appear in
this subpart: Approval; Exemption; Federal hazardous material
transportation law; Hazardous material; Hazardous materials regulations;
Indian tribe; Preemption determination; State; Transportation; Waiver of
preemption
Obtaining Guidance and Public Information
Sec. 105.20 Guidance and interpretations.
(a) Hazardous materials regulations. You can obtain information and
answers to your questions on compliance with the hazardous materials
regulations (49 CFR parts 171 through 180) and interpretations of those
regulations by contacting PHMSA's Office of Hazardous Materials Safety
as follows:
(1) Call the Hazardous Materials Information Center at 1-800-467-
4922 (in Washington, DC, call (202) 366-4488). The Center is staffed
from 9 a.m. through 5 p.m. Eastern time, Monday through Friday except
Federal holidays. After hours, you can leave a recorded message and your
call will be returned by the next business day.
(2) E-mail the Hazardous Materials Information Center at
[email protected].
(3) Obtain hazardous materials safety information via the Internet
at http://www.phmsa.dot.gov.
(4) Send a letter, with your return address and a daytime telephone
number, to: Office of Hazardous Materials Standards, Pipeline and
Hazardous Materials Safety Administration, Attn: PHH-10, U.S. Department
of Transportation, 400 7th Street SW., Washington, DC 20590-0001.
(b) Federal hazardous materials transportation law and preemption.
You can obtain information and answers to your questions on Federal
hazardous materials transportation law, 49 U.S.C. 5101 et seq., and
Federal preemption of State, local, and Indian tribe hazardous material
transportation requirements, by contacting PHMSA's Office of the Chief
Counsel as follows:
(1) Call the office of the Chief Counsel at (202) 366-4400 from 9
a.m. to 5 p.m. Eastern time, Monday through Friday except Federal
holidays.
(2) Access information from the Office of the Chief Counsel via the
Internet at http://www.phmsa.dot.gov.
(3) Send a letter, with your return address and a daytime telephone
number, to: Office of the Chief Counsel, Pipeline and Hazardous
Materials Safety Administration, Attn: PHC-10, U.S. Department of
Transportation, 400 7th Street, SW., Washington, DC 20590-0001.
(4) Contact the Office of the Chief Counsel for a copy of
applications for preemption determinations, waiver of preemption
determinations, and inconsistency rulings received by PHMSA before
February 1, 1997.
[70 FR 56087, Sept. 23, 2005]
Sec. 105.25 Reviewing public documents.
PHMSA is required by statute to make certain documents and
information available to the public. You can review and copy publicly
available documents and information at the locations described in this
section.
(a) DOT Docket Management System. Unless a particular document says
otherwise, the following documents are available for public review and
copying at the Department of Transportation's Docket Management System,
Room PL 401, 400 7th Street, SW., Washington, DC 20590-0001, or for
review and downloading through the Internet at http://dms.dot.gov.
(1) Rulemaking documents in proceedings started after February 1,
1997, including notices of proposed rulemaking, advance notices of
proposed rulemaking, public comments, related Federal Register notices,
final rules, appeals, and PHMSA's decisions in response to appeals.
(2) Applications for exemption numbered DOT-E 11832 and above. Also
available are supporting data, memoranda of any informal meetings with
applicants, related Federal Register notices, public comments, and
decisions granting or denying exemptions applications.
(3) Applications for preemption determinations and waiver of
preemption determinations received by PHMSA after February 1, 1997. Also
available are public comments, Federal Register notices, and PHMSA's
rulings,
[[Page 10]]
determinations, decisions on reconsideration, and orders issued in
response to those applications.
(b) Office of Pipeline and Hazardous Materials Safety
Administration's Office of Hazardous Materials Safety.
(1) You may obtain documents (e.g., proposed and final rules,
notices, letters of clarification, safety notices, DOT forms and other
documents) by contacting the Hazardous Materials Information Center at
1-800-467-4922 or through the Internet at http://www.phmsa.dot.gov.
(2) Upon your written request, we will make the following documents
and information available to you:
(i) Appeals under 49 CFR part 107 and PHMSA's decisions issued in
response to those appeals.
(ii) Records of compliance order proceedings and PHMSA compliance
orders.
(iii) Applications for approvals, including supporting data,
memoranda of any informal meetings with applicants, and decisions
granting or denying approvals applications.
(iv) Applications for exemptions numbered below DOT-E 11832 and
related background information are available for public review and
copying at the Office of Hazardous Materials Safety, Office of Hazardous
Materials Exemptions and Approvals, U.S. Department of Transportation,
Room 8100, 400 7th Street, SW., Washington, DC 20590-0001.
(v) Other information about PHMSA's hazardous materials program
required by statute to be made available to the public for review and
copying and any other information PHMSA decides should be available to
the public.
(3) Your written request to review documents should include the
following:
(i) A detailed description of the documents you wish to review.
(ii) Your name, address, and telephone number.
(4) Send your written request to: Associate Administrator for
Hazardous Materials Safety, Pipeline and Hazardous Materials Safety
Administration, Attn: PHH-1, U.S. Department of Transportation, 400 7th
Street, SW., Washington, DC 20590-0001.
[70 FR 56088, Sept. 23, 2005]
Sec. 105.26 Obtaining records on file with PHMSA.
To obtain records on file with PHMSA, other than those described in
Sec. 105.25, you must file a request with PHMSA under the Freedom of
Information Act (FOIA) (5 U.S.C. 552). The procedures for filing a FOIA
request are contained in 49 CFR part 7.
Sec. 105.30 Information made available to the public and request for
confidential treatment.
When you submit information to PHMSA during a rulemaking proceeding,
as part of your application for exemption or approval, or for any other
reason, we may make that information publicly available unless you ask
that we keep the information confidential.
(a) Asking for confidential treatment. You may ask us to give
confidential treatment to information you give to the agency by taking
the following steps:
(1) Mark ``confidential'' on each page of the original document you
would like to keep confidential.
(2) Send us, along with the original document, a second copy of the
original document with the confidential information deleted.
(3) Explain why the information you are submitting is confidential
(for example, it is exempt from mandatory public disclosure under the
Freedom of Information Act, 5 U.S.C. 552 or it is information referred
to in 18 U.S.C. 1905).
(b) PHMSA Decision. PHMSA will decide whether or not to treat your
information as confidential. We will notify you, in writing, of a
decision to grant or deny confidentiality at least five days before the
information is publicly disclosed, and give you an opportunity to
respond.
Serving Documents
Sec. 105.35 Serving documents in PHMSA proceedings.
(a) Service by PHMSA. We may serve the document by one of the
following methods, except where a different
[[Page 11]]
method of service is specifically required:
(1) Registered or certified mail.
(i) If we serve a document by registered or certified mail, it is
considered served when mailed.
(ii) An official United States Postal Service receipt from the
registered or certified mailing is proof of service.
(iii) We may serve a person's authorized representative or agent by
registered or certified mail, or in any other manner authorized by law.
Service on a person's authorized agent is the same as service on the
person.
(2) Personal service.
(3) Publication in the Federal Register.
(b) Service by others. If you are required under this subchapter to
serve a person with a document, serve the document by one of the
following methods, except where a different method of service is
specifically required:
(1) Registered or certified mail.
(i) If you serve a document by registered or certified mail, it is
considered served when mailed.
(ii) An official United States Postal Service receipt from the
registered or certified mailing is proof of service.
(iii) You may serve a person's authorized representative or agent by
registered or certified mail or in any other manner authorized by law.
Service on a person's authorized agent is the same as service on the
person.
(2) Personal service.
(3) Electronic service.
(i) In a proceeding under Sec. 107.317 of this subchapter (an
administrative law judge proceeding), you may electronically serve
documents on us.
(ii) Serve documents electronically through the Internet at http://
dms.dot.gov.
Sec. 105.40 Designated agents for non-residents.
(a) General requirement. If you are not a resident of the United
States but are required by this subchapter or subchapter C of this
chapter to designate a permanent resident of the United States to act as
your agent and receive documents on your behalf, you must prepare a
designation and file it with us.
(b) Agents. An agent:
(1) May be an individual, a firm, or a domestic corporation.
(2) May represent any number of principals.
(3) May not reassign responsibilities under a designation to another
person.
(c) Preparing a designation. Your designation must be written and
dated, and it must contain the following information:
(1) The section in the HMR that requires you to file a designation.
(2) A certification that the designation is in the correct legal
form required to make it valid and binding on you under the laws,
corporate bylaws, and other requirements that apply to designations at
the time and place you are making the designation.
(3) Your full legal name, the principal name of your business, and
your mailing address.
(4) A statement that your designation will remain in effect until
you withdraw or replace it.
(5) The legal name and mailing address of your agent.
(6) A declaration of acceptance signed by your agent.
(d) Address. Send your designation to: Office of Hazardous Materials
Exemptions and Approvals, Pipeline and Hazardous Materials Safety
Administration, Attn: PHH-30, U.S. Department of Transportation, 400 7th
Street, SW., Washington, DC 20590-0001.
(e) Designations are binding. You are bound by your designation of
an agent, even if you did not follow all the requirements in this
section, until we reject your designation.
[67 FR 42951, June 25, 2002, as amended at 70 FR 56088, Sept. 23, 2005]
Subpoenas
Sec. 105.45 Issuing a subpoena.
(a) Subpoenas explained. A subpoena is a document that may require
you to attend a proceeding, produce documents or other physical evidence
in your possession or control, or both. PHMSA may issue a subpoena
either on its initiative or at the request of someone participating in a
proceeding. Anyone who requests that PHMSA issue a subpoena must show
that the subpoena seeks information that will materially advance the
proceeding.
[[Page 12]]
(b) Attendance and mileage expenses.
(1) If you receive a subpoena to attend a proceeding under this
part, you may receive money to cover attendance and mileage expenses.
The attendance and mileage fees will be the same as those paid to a
witness in a proceeding in the district courts of the United States.
(2) If PHMSA issues a subpoena to you based upon a request, the
requester must serve a copy of the original subpoena on you, as required
in Sec. 105.50. The requester must also include attendance and mileage
fees with the subpoena unless the requester asks PHMSA to pay the
attendance and mileage fees because of demonstrated financial hardship
and PHMSA agrees to do so.
(3) If PHMSA issues a subpoena at the request of an officer or
agency of the Federal government, the officer or agency is not required
to include attendance and mileage fees when serving the subpoena. The
officer or agency must pay the fees before you leave the hearing at
which you testify.
Sec. 105.50 Serving a subpoena.
(a) Personal service. Anyone who is not an interested party and who
is at least 18 years of age may serve you with a subpoena and fees by
handing the subpoena and fees to you, by leaving them at your office
with the individual in charge, or by leaving them at your house with
someone who lives there and is capable of making sure that you receive
them. If PHMSA issues a subpoena to an entity, rather than an
individual, personal service is made by delivering the subpoena and fees
to the entity's registered agent for service of process or to any
officer, director or agent in charge of any of the entity's offices.
(b) Service by mail. You may be served with a copy of a subpoena and
fees by certified or registered mail at your last known address. Service
of a subpoena and fees may also be made by registered or certified mail
to your agent for service of process or any of your representatives at
that person's last known address.
(c) Other methods. You may be served with a copy of a subpoena by
any method where you receive actual notice of the subpoena and receive
the fees before leaving the hearing at which you testify.
(d) Filing after service. After service is complete, the individual
who served a copy of a subpoena and fees must file the original subpoena
and a certificate of service with the PHMSA official who is responsible
for conducting the hearing.
Sec. 105.55 Refusal to obey a subpoena.
(a) Quashing or modifying a subpoena. If you receive a subpoena, you
can ask PHMSA to overturn (``quash'') or modify the subpoena within 10
days after the subpoena is served on you. Your request must briefly
explain the reasons you are asking for the subpoena to be quashed or
modified. PHMSA may then do the following:
(1) Deny your request.
(2) Quash or modify the subpoena.
(3) Grant your request on the condition that you satisfy certain
specified requirements.
(b) Failure to obey. If you disobey a subpoena, PHMSA may ask the
Attorney General to seek help from the United States District Court for
the appropriate District to compel you, after notice, to appear before
PHMSA and give testimony, produce subpoenaed documents or physical
evidence, or both.
PART 106_RULEMAKING PROCEDURES--Table of Contents
Subpart A_ PHMSA Rulemaking Documents
Sec.
106.5 Defined terms used in this subpart.
106.10 Process for issuing rules.
106.15 Advance notice of proposed rulemaking.
106.20 Notice of proposed rulemaking.
106.25 Revising regulations without first issuing an ANPRM or NPRM.
106.30 Final rule.
106.35 Interim final rule.
106.40 Direct final rule.
106.45 Tracking rulemaking actions.
Subpart B_Participating in the Rulemaking Process
106.50 Defined terms used in this subpart.
106.55 Public participation in the rulemaking process.
[[Page 13]]
Written Comments
106.60 Filing comments.
106.65 Required information for written comments.
106.70 Where and when to file comments.
106.75 Extension of time to file comments.
Public Meetings and Other Proceedings
106.80 Public meeting procedures.
106.85 Requesting a public meeting.
106.90 Other rulemaking proceedings.
Petitions for Rulemaking
106.95 Requesting a change to the regulations.
106.100 Required information for a petition for rulemaking.
106.105 PHMSA response to a petition for rulemaking.
Appeals
106.110 Appealing a PHMSA action.
106.115 Required information for an appeal.
106.120 Appeal deadline.
106.125 Filing an appeal.
106.130 PHMSA response to an appeal.
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Source: 67 FR 42954, June 25, 2002, unless otherwise noted.
Editorial Note: Nomenclature changes to part 106 appear at 70 FR
56088, Sept. 23, 2005.
Subpart A_PHMSA Rulemaking Documents
Sec. 106.5 Defined terms used in this subpart.
The following defined terms (see part 105, subpart A, of this
subchapter) appear in this subpart: File; Person; State.
Sec. 106.10 Process for issuing rules.
(a) PHMSA (``we'') uses informal rulemaking procedures under the
Administrative Procedure Act (5 U.S.C. 553) to add, amend, or delete
regulations. To propose or adopt changes to a regulation, PHMSA may
issue one or more of the following documents. We publish the following
rulemaking documents in the Federal Register unless we name and
personally serve a copy of a rule on every person subject to it:
(1) An advance notice of proposed rulemaking.
(2) A notice of proposed rulemaking.
(3) A final rule.
(4) An interim final rule.
(5) A direct final rule.
(b) Each of the rulemaking documents in paragraph (a) of this
section generally contains the following information:
(1) The topic involved in the rulemaking document.
(2) PHMSA's legal authority for issuing the rulemaking document.
(3) How interested persons may participate in the rulemaking
proceeding (for example, by filing written comments or making oral
presentations).
(4) Whom to call if you have questions about the rulemaking
document.
(5) The date, time, and place of any public meetings being held to
discuss the rulemaking document.
(6) The docket number and regulation identifier number (RIN) for the
rulemaking proceeding.
[67 FR 42954, June 25, 2002, as amended at 70 FR 56088, Sept. 23, 2005]
Sec. 106.15 Advance notice of proposed rulemaking.
An advance notice of proposed rulemaking (ANPRM) tells the public
that PHMSA is considering an area for rulemaking and requests written
comments on the appropriate scope of the rulemaking or on specific
topics. An advance notice of proposed rulemaking may or may not include
the text of potential changes to a regulation.
Sec. 106.20 Notice of proposed rulemaking.
A notice of proposed rulemaking (NPRM) contains PHMSA's specific
proposed regulatory changes for public comment and contains supporting
information. It generally includes proposed regulatory text.
Sec. 106.25 Revising regulations without first issuing an ANPRM or NPRM.
PHMSA may add, amend, or delete regulations without first issuing an
ANPRM or NPRM in the following situations:
(a) We may go directly to a final rule or interim final rule if, for
good cause, we find that a notice of proposed rulemaking is
impracticable, unnecessary, or contrary to the public interest. We must
place that finding and a brief statement of the reasons for it in the
final rule or interim final rule.
[[Page 14]]
(b) We may issue a direct final rule (see Sec. 106.40).
Sec. 106.30 Final rule.
A final rule sets out new regulatory requirements and their
effective date. A final rule will also identify issues raised by
commenters in response to the notice of proposed rulemaking and give the
agency's response.
Sec. 106.35 Interim final rule.
An interim final rule is issued without first issuing a notice of
proposed rulemaking and accepting public comments and sets out new
regulatory requirements and their effective date. PHMSA may issue an
interim final rule if it finds, for good cause, that notice and public
procedure are impracticable, unnecessary, or contrary to the public
interest. PHMSA will clearly set out this finding in the interim final
rule. After receiving and reviewing public comments, as well as any
other relevant documents, PHMSA may revise the interim final rule and
then issue a final rule.
Sec. 106.40 Direct final rule.
A direct final rule makes regulatory changes and states that the
regulatory changes will take effect on a specified date unless PHMSA
receives an adverse comment or notice of intent to file an adverse
comment within the comment period--generally 60 days after the direct
final rule is published in the Federal Register.
(a) Actions taken by direct final rule. We may use direct final
rulemaking procedures to issue rules that do any of the following:
(1) Make minor substantive changes to regulations.
(2) Incorporate by reference the latest edition of technical or
industry standards.
(3) Extend compliance dates.
(4) Make noncontroversial changes to regulations. We must determine
and publish a finding that use of direct final rulemaking, in this
situation, is in the public interest and unlikely to result in adverse
comment.
(b) Adverse comment. An adverse comment explains why a rule would be
inappropriate, or would be ineffective or unacceptable without a change.
It may challenge the rule's underlying premise or approach. Under the
direct final rule process, we do not consider the following types of
comments to be adverse:
(1) A comment recommending another rule change, in addition to the
change in the direct final rule at issue, unless the commenter states
why the direct final rule would be ineffective without the change.
(2) A frivolous or irrelevant comment.
(c) Confirmation of effective date. We will publish a confirmation
document in the Federal Register, generally within 15 days after the
comment period closes, if we have not received an adverse comment or
notice of intent to file an adverse comment. The confirmation document
tells the public the effective date of the rule--either the date stated
in the direct final rule or at least 30 days after the publication date
of the confirmation document, whichever is later.
(d) Withdrawing a direct final rule. (1) If we receive an adverse
comment or notice of intent to file an adverse comment, we will publish
a document in the Federal Register before the effective date of the
direct final rule advising the public and withdrawing the direct final
rule in whole or in part.
(2) If we withdraw a direct final rule because of an adverse
comment, we may incorporate the adverse comment into a later direct
final rule or may publish a notice of proposed rulemaking.
(e) Appeal. You may appeal PHMSA's issuance of a direct final rule
(see Sec. 106.115) only if you have previously filed written comments
(see Sec. 106.60) to the direct final rule.
Sec. 106.45 Tracking rulemaking actions.
The following identifying numbers allow you to track PHMSA's
rulemaking activities:
(a) Docket number. We assign an identifying number, called a docket
number, to each rulemaking proceeding. Each rulemaking document that
PHMSA issues in a particular rulemaking proceeding will display the same
docket number. This number allows you to do the following:
[[Page 15]]
(1) Associate related documents that appear in the Federal Register.
(2) Search the DOT Docket Management System (``DMS'') for
information on particular rulemaking proceedings--including notices of
proposed rulemaking, public comments, petitions for rulemaking, appeals,
records of additional rulemaking proceedings and final rules. There are
two ways you can search the DMS:
(i) Visit the public docket room and review and copy any docketed
materials during regular business hours. The DOT Docket Management
System is located at the U.S. Department of Transportation, Plaza Level
401, 400 7th Street, SW., Washington, DC 20590-0001.
(ii) View and download docketed materials through the Internet at
http://dms.dot.gov.
(b) Regulation identifier number. The Department of Transportation
publishes a semiannual agenda of all current and projected Department of
Transportation rulemakings, reviews of existing regulations, and
completed actions. This semiannual agenda appears in the Unified Agenda
of Federal Regulations that is published in the Federal Register in
April and October of each year. The semiannual agenda tells the public
about the Department's--including PHMSA's--regulatory activities. The
Department assigns a regulation identifier number (RIN) to each
individual rulemaking proceeding in the semiannual agenda. This number
appears on all rulemaking documents published in the Federal Register
and makes it easy for you to track those rulemaking proceedings in both
the Federal Register and the semiannual regulatory agenda itself, as
well as to locate all documents in the Docket Management System
pertaining to a particular rulemaking.
[70 FR 56088, Sept. 23, 2005]
Subpart B_Participating in the Rulemaking Process
Sec. 106.50 Defined terms used in this subpart.
The following defined terms (see part 105, subpart A, of this
subchapter) appear in this subpart: File; Person; Political subdivision;
State.
Sec. 106.55 Public participation in the rulemaking process.
You may participate in PHMSA's rulemaking process by doing any of
the following:
(a) File written comments on any rulemaking document that asks for
comments, including an advance notice of proposed rulemaking, notice of
proposed rulemaking, interim final rule, or direct final rule.
(b) Ask that we hold a public meeting in any rulemaking proceeding
and participate in any public meeting that we hold.
(c) File a petition for rulemaking that asks us to add, amend, or
delete a regulation.
(d) File an appeal that asks us to reexamine our decision to issue
all or part of a final rule, interim final rule, or direct final rule.
Written Comments
Sec. 106.60 Filing comments.
Anyone may file written comments about proposals made in any
rulemaking document that requests public comments, including any State
government agency, any political subdivision of a State, and any
interested person invited by PHMSA to participate in the rulemaking
process.
Sec. 106.65 Required information for written comments.
Your comments must be in English and must contain the following:
(a) The docket number of the rulemaking document you are commenting
on, clearly set out at the beginning of your comments.
(b) Information, views, or arguments that follow the instructions
for participation that appear in the rulemaking document on which you
are commenting.
(c) All material that is relevant to any statement of fact in your
comments.
(d) The document title and page number of any material that you
reference in your comments.
Sec. 106.70 Where and when to file comments.
(a) Unless you are told to do otherwise in the rulemaking document
on
[[Page 16]]
which you are commenting, send your comments to us in either of the
following ways:
(1) By mail to: Docket Management System, U.S. Department of
Transportation, Room PL 401, Washington, DC 20590-0001.
(2) Through the Internet to http://dms.dot.gov.
(b) Make sure that your comments reach us by the deadline set out in
the rulemaking document on which you are commenting. We will consider
late filed comments to the extent possible.
(c) We may reject comments that are not relevant to the rulemaking.
We may reject comments you file electronically if you do not follow the
electronic filing instructions at the DOT Web site.
[67 FR 42954, June 25, 2002, as amended at 69 FR 54044, Sept. 7, 2004]
Sec. 106.75 Extension of time to file comments.
You may ask for more time to file comments on a rulemaking
proceeding. If PHMSA grants your request, it is granted to all persons.
We will notify the public of the extension by publishing a document in
the Federal Register. If PHMSA denies your request, PHMSA will notify
you of the denial. To ask for more time, you must do the following:
(a) File a request for extension at least ten days before the end of
the comment period established in the rulemaking document.
(b) Show that you have good cause for the extension and that an
extension is in the public interest.
(c) Include the docket number of the rulemaking document you are
seeking additional time to comment on, clearly set out at the beginning
of your request.
(d) Send your request to: Docket Management System, U.S. Department
of Transportation, Room PL 401, 400 7th Street, SW., Washington, DC
20590-0001.
Public Meetings and Other Proceedings
Sec. 106.80 Public meeting procedures.
A public meeting is a non-adversarial, fact-finding proceeding
conducted by a PHMSA representative. Generally, public meetings are
announced in the Federal Register. Interested persons are invited to
attend and to present their views to the agency on specific issues.
There are no formal pleadings and no adverse parties, and any regulation
issued afterward is not necessarily based exclusively on the record of
the meeting. Sections 556 and 557 of the Administrative Procedure Act (5
U.S.C. 556 and 557) do not apply to public meetings under this part.
Sec. 106.85 Requesting a public meeting.
(a) You may ask for a public meeting by filing a written request
with PHMSA no later than 20 days before the expiration of the comment
period specified in the rulemaking document. Send your request for a
public meeting to: Docket Management System, U.S. Department of
Transportation, Room PL 401, 400 7th Street, SW., Washington, DC 20590-
0001.
(b) PHMSA will review your request and, if you have shown good cause
for a public meeting, we will grant it and publish a notice of the
meeting in the Federal Register.
Sec. 106.90 Other rulemaking proceedings.
During a rulemaking proceeding, PHMSA may invite you to do the
following:
(a) Participate in a conference at which minutes are taken.
(b) Make an oral presentation.
(c) Participate in any other public proceeding to ensure that PHMSA
makes informed decisions during the rulemaking process and to protect
the public interest, including a negotiated rulemaking or work group led
by a facilitator.
Petitions for Rulemaking
Sec. 106.95 Requesting a change to the regulations.
You may ask PHMSA to add, amend, or delete a regulation by filing a
petition for rulemaking as follows:
(a) For regulations in 49 CFR parts 110, 130, 171 through 180,
submit the petition to: Office of Hazardous Materials
[[Page 17]]
Standards, Pipeline and Hazardous Materials Safety Administration, Attn:
PHH-10, U.S. Department of Transportation, 400 7th Street, SW.,
Washington, DC 20590-0001.
(b) For regulations in 49 CFR parts 105, 106, or 107, submit the
petition to: Office of the Chief Counsel, Pipeline and Hazardous
Materials Safety Administration, Attn: PHC-10, U.S. Department of
Transportation, 400 7th Street, SW., Washington, DC 20590-0001.
[70 FR 56089, Sept. 23, 2005]
Sec. 106.105 PHMSA response to a petition for rulemaking.
We will review and respond to your petition for rulemaking as
follows:
------------------------------------------------------------------------
And if we
If your petition is . . . determine that . Then . . .
. .
------------------------------------------------------------------------
(a) Incomplete.................. .................. We may return your
petition with a
written
explanation.
---------------------------------
(b) Complete.................... Your petition does We will notify you
not justify a in writing that
rulemaking action. we will not start
a rulemaking
proceeding.
---------------------------------
(c) Complete.................... Your petition does We will notify you
justify a in writing that
rulemaking action. we will start a
rulemaking
proceeding.
------------------------------------------------------------------------
Appeals
Sec. 106.110 Appealing a PHMSA Action.
You may appeal the following PHMSA actions:
(a) PHMSA's issuance of a final rule or PHMSA's withdrawal of a
notice of proposed rulemaking under the rulemaking procedures in this
part. However, you may appeal PHMSA's issuance of a direct final rule
only if you previously filed comments to the direct final rule (see
Sec. 106.40(e)).
(b) Any PHMSA decision on a petition for rulemaking.
Sec. 106.115 Required information for an appeal.
(a) Appeal of a final rule or withdrawal of a notice of proposed
rulemaking. If you appeal PHMSA's issuance of a final rule or PHMSA's
withdrawal of a notice of proposed rulemaking, your appeal must include
the following:
(1) The docket number of the rulemaking you are concerned about,
clearly set out at the beginning of your appeal.
(2) A brief statement of your concern about the final rule or the
withdrawal of notice of proposed rulemaking at issue.
(3) An explanation of why compliance with the final rule is not
practical, reasonable, or in the public interest.
(4) If you want PHMSA to consider more facts, the reason why you did
not present those facts within the time given during the rulemaking
process for public comment.
(b) Appeal of a decision. If you appeal PHMSA's decision on a
petition for rulemaking, you must include the following:
(1) The contested aspects of the decision.
(2) Any new arguments or information.
Sec. 106.120 Appeal deadline.
(a) Appeal of a final rule or withdrawal of a notice of proposed
rulemaking. If you appeal PHMSA's issuance of a final rule or PHMSA's
withdrawal of a proposed rulemaking, your appeal document must reach us
no later than 30 days after the date PHMSA published the regulation or
the withdrawal notice in the Federal Register. After that time, PHMSA
will consider your appeal to be a petition for rulemaking under Sec.
106.100.
(b) Appeal of a decision. If you appeal PHMSA's decision on a
petition for rulemaking, your appeal document must reach us no later
than 30 days from the date PHMSA served you with written notice of
PHMSA's decision.
[70 FR 56089, Sept. 23, 2005]
Sec. 106.125 Filing an appeal.
Send your appeal to: Docket Management System, U.S. Department of
Transportation, Room PL 401, 400 7th Street, SW., Washington, DC 20590-
0001.
Sec. 106.130 PHMSA response to an appeal.
Unless PHMSA provides otherwise, filing an appeal will not keep a
final rule from becoming effective. We will handle an appeal according
to the following procedures:
(a) Appeal of a final rule or withdrawal of a notice of proposed
rulemaking. (1) We
[[Page 18]]
may consolidate your appeal with other appeals of the same rule.
(2) We may grant or deny your appeal, in whole or in part, without
further rulemaking proceedings, unless granting your appeal would result
in the issuance of a new final rule.
(3) If we decide to grant your appeal, we may schedule further
proceedings and an opportunity to comment.
(4) PHMSA will notify you, in writing, of the action on your appeal
within 90 days after the date that PHMSA published the final rule or
withdrawal of notice of proposed rulemaking at issue in the Federal
Register. If we do not issue a decision on your appeal within the 90-day
period and we anticipate a substantial delay, we will notify you
directly about the delay and will give you an expected decision date. We
will also publish a notice of the delay in the Federal Register.
(b) Appeal of a decision. (1) We will not consider your appeal if it
merely repeats arguments that PHMSA has previously rejected.
(2) PHMSA will notify you, in writing, of the action on your appeal
within 90 days after the date that PHMSA served you with written notice
of its decision on your petition for rulemaking. If we do not issue a
decision on your appeal within the 90-day period, and we anticipate a
substantial delay, we will notify you directly about the delay and will
give you an expected decision date.
PART 107_HAZARDOUS MATERIALS PROGRAM PROCEDURES--Table of Contents
Subpart A_Definitions
Sec.
107.1 Definitions.
Subpart B_Exemptions
107.101 Purpose and scope.
107.105 Application for exemption.
107.107 Application for party status.
107.109 Application for renewal.
107.111 Withdrawal.
107.113 Application processing and evaluation.
107.117 Emergency processing.
107.121 Modification, suspension or termination of exemption or grant of
party status.
107.123 Reconsideration.
107.125 Appeal.
107.127 Availability of documents for public inspection.
Subpart C_Preemption
107.201 Purpose and scope.
107.202 Standards for determining preemption.
Preemption Determinations
107.203 Application.
107.205 Notice.
107.207 Processing.
107.209 Determination.
107.211 Petition for reconsideration.
107.213 Judicial review.
Waiver of Preemption Determinations
107.215 Application.
107.217 Notice.
107.219 Processing.
107.221 Determination.
107.223 Petition for reconsideration.
107.227 Judicial review.
Subpart D_Enforcement
107.301 Delegated authority for enforcement.
107.303 Purpose and scope.
107.305 Investigations.
Compliance Orders and Civil Penalties
107.307 General.
107.309 Warning letters.
107.310 Ticketing.
107.311 Notice of probable violation.
107.313 Reply.
107.315 Admission of violations.
107.317 Informal response.
107.319 Request for a hearing.
107.321 Hearing.
107.323 ALJ's decision.
107.325 Appeals.
107.327 Compromise and settlement.
107.329 Maximum penalties.
107.331 Assessment considerations.
Criminal Penalties
107.333 Criminal penalties generally.
107.335 Referral for prosecution.
107.336 Limitation on fines and penalties.
Injunctive Action
107.337 Injunctions generally.
107.339 Imminent hazards.
Appendix A to Subpart D of Part 107--Guidelines for Civil Penalties
Subpart E_Designation of Approval and Certification Agencies
107.401 Purpose and scope.
107.402 Application for designation as an approval or certification
agency.
107.403 Designation of approval agencies.
[[Page 19]]
107.404 Conditions of designation.
107.405 Termination of designation.
Subpart F_Registration of Cargo Tank and Cargo Tank Motor Vehicle
Manufacturers, Assemblers, Repairers, Inspectors, Testers, and Design
Certifying Engineers
107.501 Scope.
107.502 General registration requirements.
107.503 Registration statement.
107.504 Period of registration, updates, and record retention.
Subpart G_Registration of Persons Who Offer or Transport Hazardous
Materials
107.601 Applicability.
107.606 Exceptions.
107.608 General registration requirements.
107.612 Amount of fee.
107.616 Payment procedures.
107.620 Recordkeeping requirements.
Subpart H_Approvals, Registrations and Submissions
107.701 Purpose and scope.
107.705 Registrations, reports, and applications for approval.
107.709 Processing of an application for approval, including an
application for renewal or modification.
107.711 Withdrawal.
107.713 Approval modification, suspension or termination.
107.715 Reconsideration.
107.717 Appeal.
Subpart I_Approval of Independent Inspection Agencies, Cylinder
Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT
Specification Cylinders
107.801 Purpose and scope.
107.803 Approval of independent inspection agency.
107.805 Approval of cylinder requalifiers.
107.807 Approval of non-domestic chemical analyses and tests.
Authority: 49 U.S.C. 5101-5127, 44701; Pub. L. 101-410 section 4 (28
U.S.C. 2461 note); Pub. L. 104-121 sections 212-213; Pub. L. 104-134
section 31001; 49 CFR 1.45, 1.53.
Editorial Note: Nomenclature changes to part 107 appear at 67 FR
61011, Sept. 27, 2002 and 70 FR 56089, Sept. 23, 2005.
Subpart A_Definitions
Sec. 107.1 Definitions.
All terms defined in 49 U.S.C. 5102 are used in their statutory
meaning. Other terms used in this part are defined as follows:
Acting knowingly means acting or failing to act while
(1) Having actual knowledge of the facts giving rise to the
violation, or
(2) Having the knowledge that a reasonable person acting in the same
circumstances and exercising due care would have had.
Administrator means the Administrator, Pipeline and Hazardous
Materials Safety Administration or his or her delegate.
Applicant means the person in whose name an exemption, approval,
registration, a renewed or modified exemption or approval, or party
status to an exemption is requested to be issued.
Application means a request under subpart B of this part for an
exemption, a renewal or modification of an exemption, party status to an
exemption, or a request under subpart H of this part for an approval, or
renewal or modification of an approval.
Approval means written consent, including a competent authority
approval, from the Associate Administrator or other designated
Department official, to perform a function that requires prior consent
under subchapter C of this chapter (49 CFR parts 171 through 180).
Approval Agency means an organization or a person designated by the
PHMSA to certify packagings as having been designed, manufactured,
tested, modified, marked or maintained in compliance with applicable DOT
regulations.
Associate Administrator means the Associate Administrator for
Hazardous Materials Safety, Pipeline and Hazardous Materials Safety
Administration.
Competent Authority means a national agency that is responsible,
under its national law, for the control or regulation of some aspect of
hazardous materials (dangerous goods) transportation. Another term for
Competent Authority
[[Page 20]]
is ``Appropriate authority,'' which is used in the International Civil
Aviation Organization's (ICAO) Technical Instructions for the Safe
Transport of Dangerous Goods by Air. The Associate Administrator is the
United States Competent Authority for purposes of this part 107.
Competent Authority Approval means an approval by the competent
authority that is required under an international standard (for example,
the ICAO Technical Instructions for the Safe Transport of Dangerous
Goods by Air and the International Maritime Dangerous Goods Code). Any
of the following may be considered a competent authority approval if it
satisfies the requirement of an international standard:
(1) A specific regulation in subchapter A or C of this chapter.
(2) An exemption or approval issued under subchapter A or C of this
chapter.
(3) A separate document issued to one or more persons by the
Associate Administrator.
DOT or Department means U.S. Department of Transportation.
Exemption means a document issued by the Associate Administrator
under the authority of 49 U.S.C. 5117. The document permits a person to
perform a function that is not otherwise permitted under subchapter A or
C of this chapter, or other regulations issued under 49 U.S.C. 5101
through 5127 (e.g., Federal Motor Carrier Safety routing requirements.)
Federal hazardous material transportation law means 49 U.S.C. 5101
et seq.
Filed means received by the appropriate PHMSA or other designated
office within the time specified in a regulation or rulemaking document.
Holder means the person in whose name an exemption or approval has
been issued.
Imminent Hazard means the existence of a condition which presents a
substantial likelihood that death, serious illness, severe personal
injury, or substantial endangerment to health, property, or the
environment may occur before the reasonably foreseeable completion of an
administrative hearing or other formal proceeding initiated to abate the
risks of those effects.
Incident means an event resulting in the unintended and
unanticipated release of a hazardous material or an event meeting
incident reporting requirements in Sec. 171.15 or Sec. 171.16 of this
chapter.
Indian Tribe has the same meaning given that term in section 4 of
the Indian Self-Determination and Education Assistance Act (25 U.S.C.
450b).
Investigation includes investigations authorized under 49 U.S.C.
5121 and inspections authorized under 49 U.S.C. 5118 and 5121.
Manufacturing exemption means an exemption from compliance with
specified requirements that otherwise must be met before representing,
marking, certifying (including requalifying, inspecting, and testing),
selling or offering a packaging or container as meeting the requirements
of subchapter C of this chapter governing its use in the transportation
in commerce of a hazardous material. A manufacturing exemption is an
exemption issued to a manufacturer of packagings who does not offer for
transportation or transport hazardous materials in packagings subject to
the exemption.
Party means a person, other than a holder, authorized to act under
the terms of an exemption.
Person means an individual, firm, copartnership, corporation,
company, association, or joint-stock association (including any trustee,
receiver, assignee, or similar representative); or a government or
Indian tribe (or an agency or instrumentality of any government or
Indian tribe) that transports a hazardous material to further a
commercial enterprise or offers a hazardous material for transportation
in commerce. Person does not include the following:
(1) The United States Postal Service.
(2) Any agency or instrumentality of the Federal government, for the
purposes of 49 U.S.C. 5123 (civil penalties) and 5124 (criminal
penalties.)
(3) Any government or Indian tribe (or an agency or instrumentality
of any government or Indian tribe) that transports hazardous material
for a governmental purpose.
[[Page 21]]
Registration means a written acknowledgment from the Associate
Administrator that a registrant is authorized to perform a function for
which registration is required under subchapter C of this chapter (e.g.,
registration in accordance with 49 CFR 178.503 regarding marking of
packagings). For purposes of subparts A through E, ``registration'' does
not include registration under subpart F or G of this part.
Report means information, other than an application, registration or
part thereof, required to be submitted to the Associate Administrator
pursuant to this subchapter, subchapter B or subchapter C of this
chapter.
Respondent means a person upon whom the PHMSA has served a notice of
probable violation.
State means a State of the United States, the District of Columbia,
the Commonwealth of Puerto Rico, the Commonwealth of the Northern
Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other
territory or possession of the United States designated by the
Secretary.
Transports or transportation means the movement of property and
loading, unloading, or storage incidental to the movement.
[Amdt. 107-3, 41 FR 38170, Sept. 9, 1976]
Editorial Note: For Federal Register citations affecting Sec.
107.1, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Subpart B_Exemptions
Source: Amdt. 107-38, 61 FR 21095, May 9, 1996, unless otherwise
noted.
Sec. 107.101 Purpose and scope.
This subpart prescribes procedures for the issuance, modification
and termination of exemptions from requirements of this subchapter,
subchapter C of this chapter, or regulations issued under chapter 51 of
49 U.S.C.
Sec. 107.105 Application for exemption.
(a) General. Each application for an exemption or modification of an
exemption must be written in English and must--
(1) Be submitted for timely consideration, at least 120 days before
the requested effective date, in duplicate to: Associate Administrator
for Hazardous Materials Safety (Attention: Exemptions, PHH-31), Pipeline
and Hazardous Materials Safety Administration, U.S. Department of
Transportation, 400 7th Street, SW., Washington, DC 20590-0001.
Alternatively, you may send the application with any attached supporting
documentation submitted in an appropriate format by facsimile (fax) to:
(202) 366-3753 or (202) 366-3308 or by electronic mail (e-mail) to:
[email protected];
(2) State the name, street and mailing addresses, e-mail address
optional, and telephone number of the applicant; if the applicant is not
an individual, state the name, street and mailing addresses, e-mail
address optional, and telephone number of an individual designated as an
agent of the applicant for all purposes related to the application;
(3) If the applicant is not a resident of the United States, a
designation of agent for service in accordance with Sec. 105.40 of this
part; and
(4) For a manufacturing exemption, a statement of the name and
street address of each facility where manufacturing under the exemption
will occur.
(b) Confidential treatment. To request confidential treatment for
information contained in the application, the applicant shall comply
with Sec. 105.30(a).
(c) Description of exemption proposal. The application must include
the following information that is relevant to the exemption proposal:
(1) A citation of the specific regulation from which the applicant
seeks relief;
(2) Specification of the proposed mode or modes of transportation;
(3) A detailed description of the proposed exemption (e.g.,
alternative packaging, test, procedure or activity) including, as
appropriate, written descriptions, drawings, flow charts, plans and
other supporting documents;
(4) A specification of the proposed duration or schedule of events
for which the exemption is sought;
(5) A statement outlining the applicant's basis for seeking relief
from compliance with the specified regulations and, if the exemption is
requested
[[Page 22]]
for a fixed period, a description of how compliance will be achieved at
the end of that period;
(6) If the applicant seeks emergency processing specified in Sec.
107.117, a statement of supporting facts and reasons;
(7) Identification and description of the hazardous materials
planned for transportation under the exemption;
(8) Description of each packaging, including specification or
exemption number, as applicable, to be used in conjunction with the
requested exemption;
(9) For alternative packagings, documentation of quality assurance
controls, package design, manufacture, performance test criteria, in-
service performance and service-life limitations.
(10) When a Class 1 material is forbidden for transportation by
aircraft except under an exemption (see Columns 9A and 9B in the table
in 49 CFR 172.101), an applicant for an exemption to transport such
Class 1 material on passenger-carrying or cargo-only aircraft with a
maximum certificated takeoff weight of less than 12,500 pounds must
certify that no person within the categories listed in 18 U.S.C. 842(i)
will participate in the transportation of the Class 1 material.
(d) Justification of exemption proposal. The application must
demonstrate that an exemption achieves a level of safety at least equal
to that required by regulation, or if a required safety level does not
exist, is consistent with the public interest. At a minimum, the
application must provide the following:
(1) Information describing all relevant shipping and incident
experience of which the applicant is aware that relates to the
application;
(2) A statement identifying any increased risk to safety or property
that may result if the exemption is granted, and a description of the
measures to be taken to address that risk; and
(3) Either--
(i) Substantiation, with applicable analyses, data or test results,
that the proposed alternative will achieve a level of safety that is at
least equal to that required by the regulation from which the exemption
is sought; or
(ii) If the regulations do not establish a level of safety, an
analysis that identifies each hazard, potential failure mode and the
probability of its occurrence, and how the risks associated with each
hazard and failure mode are controlled for the duration of an activity
or life-cycle of a packaging.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 62 FR 51556, Oct.
1, 1997; 65 FR 50457, Aug. 18, 2000; 65 FR 58618, Sept. 29, 2000; 67 FR
61010, 61011, Sept. 27, 2002; 68 FR 23841, May 5, 2003; 69 FR 6198, Feb.
10, 2004; 70 FR 56089, Sept. 23, 2005]
Sec. 107.107 Application for party status.
(a) Any person eligible to apply for an exemption may apply to be
made party to an application or an existing exemption, other than a
manufacturing exemption.
(b) Each application filed under this section must--
(1) Be submitted in duplicate to: Associate Administrator for
Hazardous Materials Safety (Attention: Exemptions, PHH-31), Pipeline and
Hazardous Materials Safety Administration, U.S. Department of
Transportation, 400 7th Street, SW., Washington, DC 20590-0001.
Alternatively, you may send the application with any attached supporting
documentation in an appropriate format by facsimile (fax) to: (202) 366-
3753 or (202) 366-3308 or by electronic mail (e-mail) to:
[email protected];
(2) Identify by number the exemption application or exemption to
which the applicant seeks to become a party;
(3) State the name, street and mailing addresses, e-mail address
(optional), and telephone number of the applicant; if the applicant is
not an individual, state the name, street and mailing addresses, e-mail
address (optional), and telephone number of an individual designated as
the applicant's agent for all purposes related to the application;
(4) If the applicant is not a resident of the United States, provide
a designation of agent for service in accordance with Sec. 105.40 of
this subchapter; and
(5) For a Class 1 material that is forbidden for transportation by
aircraft except under an exemption (see Columns 9A and 9B in the table
in 49 CFR 172.101), an applicant for party status to an exemption to
transport such Class 1 material on passenger-carrying or cargo-only
aircraft with a maximum
[[Page 23]]
certificated takeoff weight of less than 12,500 pounds must certify that
no person within the categories listed in 18 U.S.C. 842(i) will
participate in the transportation of the Class 1 material.
(c) The Associate Administrator grants or denies an application for
party status in the manner specified in Sec. 107.113(e) and (f) of this
subpart.
(d) A party to an exemption is subject to all terms of that
exemption, including the expiration date. If a party to an exemption
wishes to renew party status, the exemption renewal procedures set forth
in Sec. 107.109 apply.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 65 FR 50457, Aug.
18, 2000; 67 FR 61010, 61011, Sept. 27, 2002; 69 FR 6198, Feb. 10, 2004;
70 FR 56090, Sept. 23, 2005]
Sec. 107.109 Application for renewal.
(a) Each application for renewal of an exemption or party status to
an exemption must--
(1) Be submitted in duplicate to: Associate Administrator for
Hazardous Materials Safety (Attention: Exemptions, PHH-31), Pipeline and
Hazardous Materials Safety Administration, U.S. Department of
Transportation, 400 7th Street, SW., Washington, DC 20590-0001.
Alternatively, you may send the application, with any attached
supporting documentation submitted in an appropriate format by facsimile
(fax) to: (202) 366-3753 or (202) 366-3308 or by electronic mail (e-
mail) to: [email protected];
(2) Identify by number the exemption for which renewal is requested;
(3) State the name, street and mailing addresses, e-mail address
optional, and telephone number of the applicant; if the applicant is not
an individual, state the name, street and mailing addresses, e-mail
address optional, and telephone number of an individual designated as an
agent of the applicant for all purposes related to the application;
(4) Include either a certification by the applicant that the
original application, as it may have been updated by any application for
renewal, remains accurate and complete; or include an amendment to the
previously submitted application as is necessary to update and assure
the accuracy and completeness of the application, with certification by
the applicant that the application as amended is accurate and complete;
and
(5) Include a statement describing all relevant shipping and
incident experience of which the applicant is aware in connection with
the exemption since its issuance or most recent renewal. If the
applicant is aware of no incidents, the applicant shall so certify. When
known to the applicant, the statement should indicate the approximate
number of shipments made or packages shipped, as the case may be, and
number of shipments or packages involved in any loss of contents,
including loss by venting other than as authorized in subchapter C.
(6) When a Class 1 material is forbidden for transportation by
aircraft except under an exemption (see Columns 9A and 9B in the table
in 49 CFR 172.101), an applicant to renew an exemption to transport such
Class 1 material on passenger-carrying or cargo-only aircraft with a
maximum certificated takeoff weight of less than 12,500 pounds must
certify that no person within the categories listed in 18 U.S.C. 842(i)
will participate in the transportation of the Class 1 material.
(b) If at least 60 days before an existing exemption expires the
holder files an application for renewal that is complete and conforms to
the requirements of this section, the exemption will not expire until
final administrative action on the application for renewal has been
taken.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 65 FR 50457, Aug.
18, 2000; 67 FR 61011, Sept. 27, 2002; 68 FR 23842, May 5, 2003; 69 FR
6198, Feb. 10, 2004; 70 FR 56090, Sept. 23, 2005]
Sec. 107.111 Withdrawal.
An application may be withdrawn at any time before a decision to
grant or deny it is made. Withdrawal of an application does not
authorize the removal of any related records from the PHMSA dockets or
files. Applications that are eligible for confidential treatment under
Sec. 105.30 will remain confidential after the application is
withdrawn. The duration of this confidential treatment for trade secrets
and commercial or financial information is indefinite, unless the party
requesting
[[Page 24]]
the confidential treatment of the materials notifies the Associate
Administrator that the confidential treatment is no longer required.
Sec. 107.113 Application processing and evaluation.
(a) The Associate Administrator reviews an application for
exemption, modification of exemption, party to exemption, or renewal of
an exemption to determine if it is complete and conforms with the
requirements of this subpart. This determination will be made within 30
days of receipt of the application for exemption, modification of
exemption, or party to exemption, and within 15 days of receipt of an
application for renewal of an exemption. If an application is determined
to be incomplete, the applicant is informed of the reasons.
(b) An application, other than a renewal, party to, or emergency
exemption application, that is determined to be complete is docketed.
Notice of the application is published in the Federal Register, and an
opportunity for public comment is provided. All comments received during
the comment period are considered before final action is taken on the
application.
(c) No public hearing or other formal proceeding is required under
this subpart before the disposition of an application. Unless emergency
processing under Sec. 107.117 is requested and granted, applications
are usually processed in the order in which they are filed.
(d) During the processing and evaluation of an application, the
Associate Administrator may request additional information from the
applicant. If the applicant does not respond to a written request for
additional information within 30 days of the date the request was
received, the application may be deemed incomplete and denied. However,
if the applicant responds in writing within the 30-day period requesting
an additional 30 days within which it will gather the requested
information, the Associate Administrator may grant the 30-day extension.
(e) The Associate Administrator may grant or deny an application, in
whole or in part. In the Associate Administrator's discretion, an
application may be granted subject to provisions that are appropriate to
protect health, safety or property. The Associate Administrator may
impose additional provisions not specified in the application or remove
conditions in the application that are unnecessary.
(f) The Associate Administrator may grant an application on finding
that--
(1) The application complies with this subpart;
(2) The application demonstrates that the proposed alternative will
achieve a level of safety that:
(i) Is at least equal to that required by the regulation from which
the exemption is sought, or
(ii) If the regulations do not establish a level of safety, is
consistent with the public interest and adequately will protect against
the risks to life and property inherent in the transportation of
hazardous materials in commerce;
(3) The application states all material facts, and contains no
materially false or materially misleading statement;
(4) The applicant meets the qualifications required by applicable
regulations; and
(5) The applicant is fit to conduct the activity authorized by the
exemption. This assessment may be based on information in the
application, prior compliance history of the applicant, and other
information available to the Associate Administrator.
(g) An applicant is notified in writing whether the application is
granted or denied. A denial contains a brief statement of reasons.
(h) An exemption and any renewal thereof terminates according to its
terms or, if not otherwise specified, two years after the date of
issuance. A grant of party status to an exemption, unless otherwise
stated, terminates on the date that the exemption expires.
(i) The Associate Administrator, on determining that an application
concerns a matter of general applicability and future effect and should
be the subject of rulemaking, may initiate rulemaking under part 106 of
this chapter in addition to or instead of acting on the application.
(j) The Associate Administrator publishes in the Federal Register a
list of all exemption grants, denials, and
[[Page 25]]
modifications and all exemption applications withdrawn under this
section.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 67 FR 61011,
Sept. 27, 2002]
Sec. 107.117 Emergency processing.
(a) An application is granted emergency processing if the Associate
Administrator, on the basis of the application and any inquiry
undertaken, finds that--
(1) Emergency processing is necessary to prevent significant injury
to persons or property (other than the hazardous material to be
transported) that could not be prevented if the application were
processed on a routine basis; or
(2) Emergency processing is necessary for immediate national
security purposes or to prevent significant economic loss that could not
be prevented if the application were processed on a routine basis.
(b) Where the significant economic loss is to the applicant, or to a
party in a contractual relationship to the applicant with respect to the
activity to be undertaken, the Associate Administrator may deny
emergency processing if timely application could have been made.
(c) A request for emergency processing on the basis of potential
economic loss must reasonably describe and estimate the potential loss.
(d) An application submitted under this section must conform to
Sec. 107.105 to the extent that the receiving Department official deems
necessary to process the application. An application on an emergency
basis must be submitted to the Department modal contact official for the
initial mode of transportation to be utilized, as follows:
(1) Certificate-Holding Aircraft: The Federal Aviation
Administration Civil Aviation Security Office that serves the place
where the flight will originate or that is responsible for the aircraft
operator's overall aviation security program. The nearest Civil Aviation
Security Office may be located by calling the FAA Duty Officer, 202-267-
3333 (any hour).
(2) Noncertificate-Holding Aircraft (Those Which Operate Under 14
CFR Part 91): The Federal Aviation Administration Civil Aviation
Security Office that serves the place where the flight will originate.
The nearest Civil Aviation Security Office may be located by calling the
FAA Duty Officer, 202-267-3333 (any hour).
(3) Motor Vehicle Transportation: Chief, Hazardous Materials
Division, Federal Motor Carrier Safety Administration, U.S. Department
of Transportation, Washington, DC 20590-0001, 202-366-6121 (day); 1-800-
424-8802 (night).
(4) Rail Transportation: Staff Director, Hazardous Materials
Division, Office of Safety Assurance and Compliance, Federal Railroad
Administration, U.S. Department of Transportation, Washington, DC 20590-
0001, 202-493-6248 or 202-493-6244 (day); 1-800-424-8802 (night).
(5) Water Transportation: Chief, Hazardous Materials Standards
Division, Office of Operating and Environmental Standards, U.S. Coast
Guard, U.S. Department of Homeland Security, Washington, DC 20593-0001;
(202) 267-1217 (day); 1-800-424-8802 (night).
(e) On receipt of all information necessary to process the
application, the receiving Department official transmits to the
Associate Administrator, by the most rapid available means of
communication, an evaluation as to whether an emergency exists under
Sec. 107.117(a) and, if appropriate, recommendations as to the
conditions to be included in the exemption. If the Associate
Administrator determines that an emergency exists under Sec. 107.117(a)
and that, with reference to the criteria of Sec. 107.113(f), granting
of the application is in the public interest, the Associate
Administrator grants the application subject to such terms as necessary
and immediately notifies the applicant. If the Associate Administrator
determines that an emergency does not exist or that granting of the
application is not in the public interest, the applicant immediately is
so notified.
(f) A determination that an emergency does not exist is not subject
to reconsideration under Sec. 107.123 of this part.
(g) Within 90 days following issuance of an emergency exemption, the
Associate Administrator will publish, in the Federal Register, a notice
of issuance with a statement of the basis
[[Page 26]]
for the finding of emergency and the scope and duration of the
exemption.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 62 FR 51556, Oct.
1, 1997; 64 FR 51914, Sept. 27, 1999; 65 FR 58618, Sept. 29, 2000; 66 FR
45377, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 70 FR 56090, Sept.
23, 2005]
Sec. 107.121 Modification, suspension or termination of exemption or
grant of party status.
(a) The Associate Administrator may modify an exemption or grant of
party status on finding that--
(1) Modification is necessary so that an exemption reflects current
statutes and regulations; or
(2) Modification is required by changed circumstances to meet the
standards of Sec. 107.113(f).
(b) The Associate Administrator may modify, suspend or terminate an
exemption or grant of party status, as appropriate, on finding that--
(1) Because of a change in circumstances, the exemption or party
status no longer is needed or no longer would be granted if applied for;
(2) The application contained inaccurate or incomplete information,
and the exemption or party status would not have been granted had the
application been accurate and complete;
(3) The application contained deliberately inaccurate or incomplete
information; or
(4) The holder or party knowingly has violated the terms of the
exemption or an applicable requirement of this chapter, in a manner
demonstrating the holder or party is not fit to conduct the activity
authorized by the exemption.
(c) Except as provided in paragraph (d) of this section, before an
exemption or grant of party status is modified, suspended or terminated,
the Associate Administrator notifies the holder or party in writing of
the proposed action and the reasons for it, and provides an opportunity
to show cause why the proposed action should not be taken.
(1) The holder or party may file a written response that shows cause
why the proposed action should not be taken within 30 days of receipt of
notice of the proposed action.
(2) After considering the holder's or party's written response, or
after 30 days have passed without response since receipt of the notice,
the Associate Administrator notifies the holder or party in writing of
the final decision with a brief statement of reasons.
(d) The Associate Administrator, if necessary to avoid a risk of
significant harm to persons or property, may in the notification declare
the proposed action immediately effective.
Sec. 107.123 Reconsideration.
(a) An applicant for exemption, an exemption holder, or an applicant
for party status to an exemption may request that the Associate
Administrator reconsider a decision under Sec. 107.113(g), Sec.
107.117(e) or Sec. 107.121(c) of this part. The request must--
(1) Be in writing and filed within 20 days of receipt of the
decision;
(2) State in detail any alleged errors of fact and law;
(3) Enclose any additional information needed to support the request
to reconsider; and
(4) State in detail the modification of the final decision sought.
(b) The Associate Administrator grants or denies, in whole or in
part, the relief requested and informs the requesting person in writing
of the decision. If necessary to avoid a risk of significant harm to
persons or property, the Associate Administrator may, in the
notification, declare the action immediately effective.
Sec. 107.125 Appeal.
(a) A person who requested reconsideration under Sec. 107.123 and
is denied the relief requested may appeal to the Administrator. The
appeal must--
(1) Be in writing and filed within 30 days of receipt of the
Associate Administrator's decision on reconsideration;
(2) State in detail any alleged errors of fact and law;
(3) Enclose any additional information needed to support the appeal;
and
(4) State in detail the modification of the final decision sought.
(b) The Administrator, if necessary to avoid a risk of significant
harm to persons or property, may declare the Associate Administrator's
action effective pending a decision on appeal.
[[Page 27]]
(c) The Administrator grants or denies, in whole or in part, the
relief requested and informs the appellant in writing of the decision.
The Administrator's decision is the final administrative action.
Sec. 107.127 Availability of documents for public inspection.
(a) Documents related to an application under this subpart,
including the application itself, are available for public inspection,
except as specified in paragraph (b) of this section, at the Office of
the Associate Administrator for Hazardous Materials Safety, Pipeline and
Hazardous Materials Safety Administration, Office of Hazardous Materials
Exemptions and Approvals, U.S. Department of Transportation, 400 7th
Street, SW, Washington, DC 20590-0001, Room 8100. Office hours are 8:30
a.m. to 5:00 p.m., Monday through Friday, except holidays when the
office is closed. Copies of available documents may be obtained as
provided in part 7 of this title. Documents numbered 11832 and above may
also be viewed at the internet website address http://dms.dot.gov.
(b) Documents available for inspection do not include materials
determined to be withheld from public disclosure under Sec. 105.30 and
in accordance with the applicable provisions of section 552(b) of title
5, United States Code, and part 7 of this title.
[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 65 FR 58618,
Sept. 29, 2000; 66 FR 45377, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002]
Subpart C_Preemption
Sec. 107.201 Purpose and scope.
(a) This subpart prescribes procedures by which:
(1) Any person, including a State, political subdivision, or Indian
tribe, directly affected by a requirement of a State, political
subdivision, or Indian tribe, may apply for a determination as to
whether that requirement is preempted under 49 U.S.C. 5125.
(2) A State, political subdivision, or Indian tribe may apply for a
waiver of preemption with respect to any requirement that the State,
political subdivision, or Indian tribe acknowledges to be preempted by
49 U.S.C. 5125, or that has been determined by a court of competent
jurisdiction to be so preempted.
(b) For purposes of this subpart ``political subdivision'' includes
a municipality; a public agency or other instrumentality of one or more
States, municipalities, or other political subdivisions of a State; or a
public corporation, board, or commission established under the laws of
one or more States.
(c) [Reserved]
(d) Unless otherwise ordered by the Associate Administrator, an
application for a preemption determination which includes an application
for a waiver of preemption will be treated and processed solely as an
application for a preemption determination.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56
FR 8622, Feb. 28, 1991; Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt.
107-32, 59 FR 49130, Sept. 26, 1994; Amdt. 107-35, 60 FR 49108, Sept.
21, 1995; Amdt. 107-38, 61 FR 21098, May 9, 1996; 68 FR 52846, Sept. 8,
2003]
Sec. 107.202 Standards for determining preemption.
(a) Except as provided in Sec. 107.221 and unless otherwise
authorized by Federal law, any requirement of a State or political
subdivision thereof or an Indian tribe that concerns one of the
following subjects and that is not substantively the same as any
provision of the Federal hazardous materials transportation law, a
regulation issued under the Federal hazardous material transportation
law, or a hazardous material transportation security regulation or
directive issued by the Secretary of Homeland Security that concerns
that subject, is preempted:
(1) The designation, description, and classification of hazardous
material.
(2) The packing, repacking, handling, labeling, marking, and
placarding of hazardous material.
(3) The preparation, execution, and use of shipping documents
pertaining to hazardous material and requirements related to the number,
content, and placement of those documents.
(4) The written notification, recording, and reporting of the
unintentional release in transportation of hazardous material.
[[Page 28]]
(5) The design, manufacturing, fabrication, marking, maintenance,
reconditioning, repairing, or testing of a packaging or a container
which is represented, marked, certified, or sold as qualified for use in
the transportation of hazardous material.
(b) Except as provided in Sec. 107.221 and unless otherwise
authorized by Federal law, any requirement of a State or political
subdivision or Indian tribe is preempted if--
(1) It is not possible to comply with a requirement of the State,
political subdivision, or Indian tribe and a requirement under the
Federal hazardous material transportation law, a regulation issued under
the Federal hazardous material transportation law, or a hazardous
material transportation security regulation or directive issued by the
Secretary of Homeland Security;
(2) The requirement of the State, political subdivision, or Indian
tribe, as applied or enforced, is an obstacle to accomplishing and
carrying out the Federal hazardous material transportation law, a
regulation issued under the Federal hazardous material transportation
law, or a hazardous material transportation security regulation or
directive issued by the Secretary of Homeland Security.
(3) It is preempted under 49 U.S.C. 5125 (c).
(c) A State, political subdivision, or Indian tribe may impose a fee
related to transporting hazardous material only if the fee is fair and
used for a purpose related to transporting hazardous material, including
enforcement and planning, developing and maintaining a capability for
emergency response.
(d) For purposes of this section, ``substantively the same'' means
that the non-Federal requirement conforms in every significant respect
to the Federal requirement. Editorial and other similar de minimis
changes are permitted.
[Amdt. 107-24, 56 FR 8622, Feb. 28, 1991, as amended by Amdt. 107-25, 57
FR 20428, May 13, 1992; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; Amdt.
107-32, 59 FR 49130, Sept. 26, 1994; Amdt. 107-38, 61 FR 21098, May 9,
1996; Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 68 FR 52847, Sept. 8,
2003]
Preemption Determinations
Sec. 107.203 Application.
(a) With the exception of highway routing matters covered under 49
U.S.C. 5125(c), any person, including a State or political subdivision
thereof or an Indian tribe, directly affected by any requirement of a
State or political subdivision thereof or an Indian tribe, may apply to
the Associate Administrator for a determination of whether that
requirement is preempted by Sec. 107.202 (a) or (b).
(b) Each application filed under this section for a determination
must:
(1) Be submitted to the Associate Administrator:
(i) By mail addressed to the Associate Administrator for Hazardous
Materials Safety (Attn: Hazardous Materials Preemption Docket), Pipeline
and Hazardous Materials Safety Administration, U.S. Department of
Transportation, 400 Seventh Street, SW., Washington, DC 20590-0001;
(ii) By fax to the Associate Administrator for Hazardous Materials
Safety (Attn: Hazardous Materials Preemption Docket), at 202-366-5713;
or
(iii) Electronically to the Associate Administrator for Hazardous
Materials Safety (Attn: Hazardous Materials Preemption Docket), at
[email protected].
(2) Set forth the text of the State or political subdivision or
Indian tribe requirement for which the determination is sought;
(3) Specify each requirement of the Federal hazardous materials
transportation law, regulations issued under the Federal hazardous
material transportation law, or hazardous material transportation
security regulations or directives issued by the Secretary of Homeland
Security with which the applicant seeks the State or political
subdivision or Indian tribe requirement to be compared;
(4) Explain why the applicant believes the State or political
subdivision or Indian tribe requirement should or should not be
preempted under the standards of Sec. 107.202; and
(5) State how the applicant is affected by the State or political
subdivision or Indian tribe requirement.
[[Page 29]]
(c) The filing of an application for a determination under this
section does not constitute grounds for noncompliance with any
requirement of the Federal hazardous materials transportation law,
regulations issued under the Federal hazardous material transportation
law, or hazardous material transportation security regulations or
directives issued by the Secretary of Homeland Security.
(d) Once the Associate Administrator has published notice in the
Federal Register of an application received under paragraph (a) of this
section, no applicant for such determination may seek relief with
respect to the same or substantially the same issue in any court until
final action has been taken on the application or until 180 days after
filing of the application, whichever occurs first. Nothing in Sec.
107.203(a) prohibits a State or political subdivision or Indian tribe,
or any other person directly affected by any requirement of a State or
political subdivision thereof or Indian tribe, from seeking a
determination of preemption in any court of competent jurisdiction in
lieu of applying to the Associate Administrator under paragraph (a) of
this section.
[Amdt. 107-24, 56 FR 8622, Feb. 28, 1991, as amended by Amdt. 107-25, 57
FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt.
107-38, 61 FR 21098, May 9, 1996; 68 FR 52847, Sept. 8, 2003]
Sec. 107.205 Notice.
(a) If the applicant is other than a State, political subdivision,
or Indian tribe, the applicant shall mail a copy of the application to
the State, political subdivision, or Indian tribe concerned accompanied
by a statement that the State, political subdivision, or Indian tribe
may submit comments regarding the application to the Associate
Administrator. The application filed with the Associate Administrator
must include a certification that the applicant has complied with this
paragraph and must include the names and addresses of each State,
political subdivision, or Indian tribe official to whom a copy of the
application was sent.
(b) The Associate Administrator will publish notice of, including an
opportunity to comment on, an application in the Federal Register and
may notify in writing any person readily identifiable as affected by the
outcome of the determination.
(c) Each person submitting written comments to the Associate
Administrator with respect to an application filed under this section
shall send a copy of the comments to the applicant and certify to the
Associate Administrator that he or she has complied with this
requirement. The Associate Administrator may notify other persons
participating in the proceeding of the comments and provide an
opportunity for those other persons to respond. Late-filed comments are
considered so far as practicable.
[Amdt. 107-38, 61 FR 21098, May 9, 1996]
Sec. 107.207 Processing.
(a) The Associate Administrator may initiate an investigation of any
statement in an application and utilize in his or her evaluation any
relevant facts obtained by that investigation. The Associate
Administrator may solicit and accept submissions from third persons
relevant to an application and will provide the applicant an opportunity
to respond to all third person submissions. In evaluating an
application, the Associate Administrator may consider any other source
of information. The Associate Administrator on his or her own initiative
may convene a hearing or conference, if he or she considers that a
hearing or conference will advance his or her evaluation of the
application.
(b) The Associate Administrator may dismiss the application without
prejudice if:
(1) He or she determines that there is insufficient information upon
which to base a determination; or
(2) He or she requests additional information from the applicant and
it is not submitted.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56
FR 8621, 8622, Feb. 28, 1991; Amdt. 107-38, 61 FR 21098, May 9, 1996]
[[Page 30]]
Sec. 107.209 Determination.
(a) Upon consideration of the application and other relevant
information received, the Associate Administrator issues a
determination.
(b) The determination includes a written statement setting forth the
relevant facts and the legal basis for the determination, and provides
that any person aggrieved thereby may file a petition for
reconsideration with the Associate Administrator.
(c) The Associate Administrator provides a copy of the determination
to the applicant and to any other person who substantially participated
in the proceeding or requested in comments to the docket to be notified
of the determination. A copy of each determination is placed on file in
the public docket. The Associate Administrator will publish the
determination or notice of the determination in the Federal Register.
(d) A determination issued under this section constitutes an
administrative determination as to whether a particular requirement of a
State or political subdivision or Indian tribe is preempted under the
Federal hazardous materials transportation law. The fact that a
determination has not been issued under this section with respect to a
particular requirement of a State or political subdivision or Indian
tribe carries no implication as to whether the requirement is preempted
under the Federal hazardous materials transportation law.
[Amdt. 107-24, 56 FR 8623, Feb. 28, 1991, as amended by Amdt. 107-25, 57
FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt.
107-38, 61 FR 21098, May 9, 1996; 68 FR 52847, Sept. 8, 2003]
Sec. 107.211 Petition for reconsideration.
(a) Any person aggrieved by a determination issued under Sec.
107.209 may file a petition for reconsideration with the Associate
Administrator. The petition must be filed within 20 days of publication
of the determination in the Federal Register.
(b) The petition must contain a concise statement of the basis for
seeking review, including any specific factual or legal error alleged.
If the petition requests consideration of information that was not
previously made available to the Associate Administrator, the petition
must include the reasons why such information was not previously made
available.
(c) The petitioner shall mail a copy of the petition to each person
who participated, either as an applicant or commenter, in the preemption
determination proceeding, accompanied by a statement that the person may
submit comments concerning the petition to the Associate Administrator
within 20 days. The petition filed with the Associate Administrator must
contain a certification that the petitioner has complied with this
paragraph and include the names and addresses of all persons to whom a
copy of the petition was sent. Late-filed comments are considered so far
as practicable.
(d) The Associate Administrator's decision constitutes final agency
action.
[Amdt. 107-25, 57 FR 20428, May 13, 1992, as amended by Amdt. 107-38, 61
FR 21099, May 9, 1996]
Sec. 107.213 Judicial review.
A party to a proceeding under Sec. 107.203(a) may seek review by
the appropriate district court of the United States of a decision of the
Associate Administrator by filing a petition with the court within 60
days after the Associate Administrator's determination becomes final.
The determination becomes final when it is published in the Federal
Register.
[Amdt. 107-38, 61 FR 21099, May 9, 1996]
Waiver of Preemption Determinations
Sec. 107.215 Application.
(a) With the exception of requirements preempted under 49 U.S.C.
5125(c), any State or political subdivision thereof, or Indian tribe may
apply to the Associate Administrator for a waiver of preemption with
respect to any requirement that the State or political subdivision
thereof or an Indian tribe acknowledges to be preempted under the
Federal hazardous materials transportation law, or that has been
[[Page 31]]
determined by a court of competent jurisdiction to be so preempted. The
Associate Administrator may waive preemption with respect to such
requirement upon a determination that such requirement--
(1) Affords an equal or greater level of protection to the public
than is afforded by the requirements of the Federal hazardous material
transportation law or the regulations issued thereunder, and
(2) Does not unreasonably burden commerce.
(b) Each application filed under this section for a waiver of
preemption determination must:
(1) Be submitted to the Associate Administrator:
(i) By mail addressed to the Associate Administrator for Hazardous
Materials Safety (Attn: Hazardous Materials Preemption Docket), Pipeline
and Hazardous Materials Safety Administration, U.S. Department of
Transportation, 400 Seventh Street, SW., Washington, DC 20590-0001;
(ii) By fax to the Associate Administrator for Hazardous Materials
Safety (Attn: Hazardous Materials Preemption Docket), at 202-366-5713;
or
(iii) Electronically to the Associate Administrator for Hazardous
Materials Safety (Attn: Hazardous Materials Preemption Docket), at
[email protected].
(2) Set forth the text of the State or political subdivision
requirement for which the determination is being sought;
(3) Include a copy of any court order and any ruling issued under
Sec. 107.209 having a bearing on the application;
(4) Contain an express acknowledgment by the applicant that the
State, political subdivision, or Indian tribe requirement is preempted
under Federal hazardous materials transportation law, unless it has been
so determined by a court of competent jurisdiction or in a determination
issued under Sec. 107.209;
(5) Specify each requirement of the Federal hazardous materials
transportation law that preempts the State, political subdivision, or
Indian tribe requirement;
(6) State why the applicant believes the State, political
subdivision or Indian tribe requirements affords an equal or greater
level of protection to the public than is afforded by the requirements
of the Federal hazardous material transportation law or the regulations
issued thereunder;
(7) State why the applicant believes the State, political
subdivision or Indian tribe requirement does not unreasonably burden
commerce; and
(8) Specify what steps the State, political subdivision or Indian
tribe is taking to administer and enforce effectively its inconsistent
requirement.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-22, 55
FR 39978, Oct. 1, 1990; Amdt. 107-24, 56 FR 8621, 8623, Feb. 28, 1991;
56 FR 15510, Apr. 17, 1991; Amdt. 107-23, 56 FR 66156, Dec. 20, 1991;
Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131,
Sept. 26, 1994; Amdt. 107-38, 61 FR 21099, May 9, 1996; 68 FR 52847,
Sept. 8, 2003 ]
Sec. 107.217 Notice.
(a) The applicant shall mail a copy of the application and any
subsequent amendments or other documents relating to the application to
each person who is reasonably ascertainable by the applicant as a person
who will be affected by the determination sought. The copy of the
application must be accompanied by a statement that the person may
submit comments regarding the application to the Associate Administrator
within 45 days. The application filed with the Associate Administrator
must include a certification that the application has complied with this
paragraph and must include the names and addresses of each person to
whom the application was sent.
(b) Notwithstanding the provisions of paragraph (a) of this section,
if the State or political subdivision determines that compliance with
paragraph (a) of this section would be impracticable, the applicant
shall:
(1) Comply with the requirements of paragraph (a) of this section
with regard to those persons whom it is reasonable and practicable to
notify; and
(2) Include with the application filed with the Associate
Administrator a description of the persons or class or classes of
persons to whom notice was not sent.
[[Page 32]]
(c) The Associate Administrator may require the applicant to provide
notice in addition to that required by paragraphs (a) and (b) of this
section, or may determine that the notice required by paragraph (a) of
the section is not impracticable, or that notice should be published in
the Federal Register. Late-filed comments are considered so far as
practicable.
(d) The Associate Administrator may notify any other persons who may
be affected by the outcome of a determination on the application.
(e) Any person submitting written comments to the Associate
Administrator with respect to an application filed under this section
shall send a copy of the comments to the applicant. The person shall
certify to the Associate Administrator that he has complied with the
requirements of this paragraph. The Associate Administrator may notify
other persons participating in the proceeding of the comments and
provide an opportunity for those other persons to respond.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56
FR 8621, Feb. 28, 1991; Amdt. 107-25, 57 FR 20429, May 13, 1992; Amdt.
107-38, 61 FR 21099, May 9, 1996]
Sec. 107.219 Processing.
(a) The Associate Administrator may initiate an investigation of any
statement in an application and utilize in his or her evaluation any
relevant facts obtained by that investigation. The Associate
Administrator may solicit and accept submissions from third persons
relevant to an application and will provide the applicant an opportunity
to respond to all third person submissions. In evaluating an
application, the Associate Administrator on his or her own initiative
may convene a hearing or conference, if he or she considers that a
hearing or conference will advance his or her evaluation of the
application.
(b) The Associate Administrator may dismiss the application without
prejudice if:
(1) He or she determines that there is insufficient information upon
which to base a determination;
(2) Upon his or her request, additional information is not submitted
by the applicant; or
(3) The applicant fails to provide the notice required by Sec.
107.217.
(c) The Associate Administrator will only consider an application
for waiver of preemption determination if--
(1) The applicant State or political subdivision thereof or Indian
tribe expressly acknowledges in its application that the State or
political subdivision or Indian tribe requirement for which the
determination is sought is inconsistent with the requirements of the
Federal hazardous materials transportation law, regulations issued under
the Federal hazardous material transportation law, or hazardous material
transportation security regulations or directives issued by the
Secretary of Homeland Security.
(2) The State or political subdivision thereof or Indian tribe
requirement has been determined by a court of competent jurisdiction or
in a ruling issued under Sec. 107.209 to be inconsistent with the
requirements of the Federal hazardous materials transportation law,
regulations issued under the Federal hazardous material transportation
law, or hazardous material transportation security regulations or
directives issued by the Secretary of Homeland Security.
(d) When the Associate Administrator has received all substantive
information it considers necessary to process an application for a
waiver of preemption determination, it serves notice of that fact upon
the applicant and all other persons who received notice of the
proceeding pursuant to Sec. 107.217.
(e) To the extent possible, each application for a waiver of
preemption determination will be acted upon in a manner consistent with
the disposition of previous applications for waiver of preemption
determinations.
[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56
FR 8621, 8623, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994;
Amdt. 107-38, 61 FR 21099, May 9, 1996; 65 FR 58618, Sept. 29, 2000; 68
FR 52847, Sept. 8, 2003; 69 FR 54044, Sept. 7, 2004]
[[Page 33]]
Sec. 107.221 Determination.
(a) After considering the application and other relevant information
received or obtained during the proceeding, the Associate Administrator
issues a determination.
(b) The Associate Administrator may issue a waiver of preemption
only on finding that the requirement of the State or political
subdivision thereof or Indian tribe affords the public a level of safety
at least equal to that afforded by the requirements of the Federal
hazardous material transportation law or the regulations issued
thereunder and does not unreasonably burden commerce. In determining if
the requirement of the State or political subdivision thereof or Indian
tribe unreasonably burdens commerce, the Associate Administrator
considers:
(1) The extent to which increased costs and impairment of efficiency
result from the requirement of the State or political subdivision
thereof or Indian tribe.
(2) Whether the requirement of the State or political subdivision
thereof or Indian tribe has a rational basis.
(3) Whether the requirement of the State or political subdivision
thereof or Indian tribe achieves its stated purpose.
(4) Whether there is need for uniformity with regard to the subject
concerned and if so, whether the requirement of the State or political
subdivision thereof or Indian tribe competes or conflicts with those of
other States or political subdivisions thereof or Indian tribes.
(c) The determination includes a written statement setting forth
relevant facts and legal bases and providing that any person aggrieved
by the determination may file a petition for reconsideration with the
Associate Administrator.
(d) The Associate Administrator provides a copy of the determination
to the applicant and to any other person who substantially participated
in the proceeding or requested in comments to the docket to be notified
of the determination. A copy of the determination is placed on file in
the public docket. The Associate Administrator will publish the
determination or notice of the determination in the Federal Register.
(e) A determination under this section constitutes an administrative
finding of whether a particular requirement of a State or political
subdivision thereof or Indian tribe is preempted under the Federal
hazardous materials transportation law, or whether preemption is waived.
[Amdt. 107-38, 61 FR 21099, May 9, 1996, as amended at 68 FR 52848,
Sept. 8, 2003]
Sec. 107.223 Petition for reconsideration.
(a) Any person aggrieved by a determination under Sec. 107.221 may
file a petition for reconsideration with the Associate Administrator.
The petition must be filed within 20 days of publication of the
determination in the Federal Register.
(b) The petition must contain a concise statement of the basis for
seeking review, including any specific factual or legal error alleged.
If the petition requests consideration of information that was not
previously made available to the Associate Administrator, the petition
must include the reasons why such information was not previously made
available.
(c) The petitioner shall mail a copy of the petition to each person
who participated, either as an applicant or commenter, in the waiver of
preemption proceeding, accompanied by a statement that the person may
submit comments concerning the petition to the Associate Administrator
within 20 days. The petition filed with the Associate Administrator must
contain a certification that the petitioner has complied with this
paragraph and include the names and addresses of all persons to whom a
copy of the petition was sent. Late-filed comments are considered so far
as practicable.
(d) The Associate Administrator's decision constitutes final agency
action.
[Amdt. 107-25, 57 FR 20429, May 13, 1992, as amended by Amdt. 107-38, 61
FR 21099, May 9, 1996]
Sec. 107.227 Judicial review.
A party to a proceeding under Sec. 107.215(a) may seek review by
the appropriate district court of the United States of a decision of the
Associate
[[Page 34]]
Administrator by filing a petition with the court within 60 days after
the Associate Administrator's determination becomes final. The
determination becomes final when it is published in the Federal
Register.
[Amdt. 107-38, 61 FR 21099, May 9, 1996]
Subpart D_Enforcement
Source: Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, unless otherwise
noted.
Sec. 107.301 Delegated authority for enforcement.
Under redelegation from the Administrator, Pipeline and Hazardous
Materials Safety Administration, the Associate Administrator for
Hazardous Materials Safety and the Office of the Chief Counsel exercise
their authority for enforcement of the Federal hazardous material
transportation law, this subchapter, and subchapter C of this
subchapter, in accordance with Sec. 1.53 of this title.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-24, 56
FR 8621, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994]
Sec. 107.303 Purpose and scope.
This subchapter describes the various enforcement authorities
exercised by the Associate Administrator for Hazardous Materials Safety
and the Office of Chief Counsel and the associated sanctions and
prescribes the procedures governing the exercise of those authorities
and the imposition of those sanctions.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51
FR 34986, Oct. 1, 1986; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991]
Sec. 107.305 Investigations.
(a) General. In accordance with its delegated authority under part 1
of this title, the Associate Administrator may initiate investigations
relating to compliance by any person with any provisions of this
subchapter or subchapter C of this chapter, or any exemption, approval,
or order issued thereunder, or any court decree relating thereto. The
Associate Administrator encourages voluntary production of documents in
accordance with and subject to Sec. 105.45, and hearings may be
conducted, and depositions taken pursuant to 49 U.S.C. 5121(a). The
Associate Administrator may conduct investigative conferences and
hearings in the course of any investigation.
(b) Investigations and Inspections. Investigations under 49 U.S.C.
5121(a) are conducted by personnel duly authorized for that purpose by
the Associate Administrator. Inspections under 49 U.S.C. 5121(c) are
conducted by Hazardous Materials Enforcement Specialists, also known as
``hazmat inspectors'' or ``inspectors,'' whom the Associate
Administrator has designated for that purpose.
(1) An inspector will, on request, present his or her credentials
for examination, but the credentials may not be reproduced.
(2) An inspector may administer oaths and receive affirmations in
any matter under investigation by the Associate Administrator.
(3) An inspector may gather information by reasonable means
including, but not limited to, interviews, statements, photocopying,
photography, and video- and audio-recording.
(4) With concurrence of the Director, Office of Hazardous Materials
Enforcement, Pipeline and Hazardous Materials Safety Administration, an
inspector may issue a subpoena for the production of documentary or
other tangible evidence if, on the basis of information available to the
inspector, the documents and evidence materially will advance a
determination of compliance with this subchapter or subchapter C.
Service of a subpoena shall be in accordance with Sec. 105.50. A person
to whom a subpoena is directed may seek review of the subpoena by
applying to the Office of Chief Counsel in accordance with Sec.
105.55(a). A subpoena issued under this paragraph may be enforced in
accordance with Sec. 105.55(b).
(c) Notification. Any person who is the subject of an Associate
Administrator investigation and who is requested to furnish information
or documentary evidence is notified as to the general purpose for which
the information or evidence is sought.
(d) Termination. When the facts disclosed by an investigation
indicate that further action is unnecessary or unwarranted at that time,
the person
[[Page 35]]
being investigated is notified and the investigative file is closed
without prejudice to further investigation by the Associate
Administrator.
(e) Confidentiality. Information received in an investigation under
this section, including the identity of the person investigated and any
other person who provides information during the investigation, shall
remain confidential under the investigatory file exception, or other
appropriate exception, to the public disclosure requirements of 5 U.S.C.
552.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-24, 56
FR 8621, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt.
107-38, 61 FR 21099, May 9, 1996; 66 FR 45377, Aug. 28, 2001; 67 FR
61011, Sept. 27, 2002]
Compliance Orders and Civil Penalties
Sec. 107.307 General.
(a) When the Associate Administrator and the Office of the Chief
Counsel have reason to believe that a person is knowingly engaging or
has knowingly engaged in conduct which is a violation of the Federal
hazardous material transportation law or any provision of this
subchapter or subchapter C of this chapter, or any exemption, or order
issued thereunder, for which the Associate Administrator or the Office
of the Chief Counsel exercise enforcement authority, they may--
(1) Issue a warning letter, as provided in Sec. 107.309;
(2) Initiate proceedings to assess a civil penalty, as provided in
either Sec. Sec. 107.310 or 107.311;
(3) Issue an order directing compliance, regardless of whether a
warning letter has been issued or a civil penalty assessed; and
(4) Seek any other remedy available under the Federal hazardous
material transportation law.
(b) In the case of a proceeding initiated for failure to comply with
an exemption, the allegation of a violation of a term or condition
thereof is considered by the Associate Administrator and the Office of
the Chief Counsel to constitute an allegation that the exemption holder
or party to the exemption is failing, or has failed to comply with the
underlying regulations from which relief was granted by the exemption.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-32, 59
FR 49131, Sept. 26, 1994; Amdt. 107-36, 61 FR 7183, Feb. 26, 1996; 66 FR
45377, Aug. 28, 2001]
Sec. 107.309 Warning letters.
(a) The Associate Administrator may issue a warning letter to any
person whom the Associate Administrator believes to have committed a
probable violation of the Federal hazardous material transportation law
or any provision of this subchapter, subchapter C of this chapter, or
any exemption issued thereunder.
(b) A warning letter issued under this section includes:
(1) A statement of the facts upon which the Associate Administrator
bases its determination that the person has committed a probable
violation;
(2) A statement that the recurrence of the probable violations cited
may subject the person to enforcement action; and
(3) An opportunity to respond to the warning letter by submitting
pertinent information or explanations concerning the probable violations
cited therein.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51
FR 34986, Oct. 1, 1986; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; Amdt.
107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-36, 61 FR 7183, Feb. 26,
1996; 66 FR 45377, Aug. 28, 2001]
Sec. 107.310 Ticketing.
(a) For an alleged violation that does not have a direct or
substantial impact on safety, the Associate Administrator may issue a
ticket.
(b) The Associate Administrator issues a ticket by mailing it by
certified or registered mail to the person alleged to have committed the
violation. The ticket includes:
(1) A statement of the facts on which the Associate Administrator
bases the conclusion that the person has committed the alleged
violation;
(2) The maximum penalty provided for by statute, the proposed full
penalty determined according to PHMSA's civil penalty guidelines and the
statutory criteria for penalty assessment, and the ticket penalty
amount; and
[[Page 36]]
(3) A statement that within 45 days of receipt of the ticket, the
person must pay the penalty in accordance with paragraph (d) of this
section, make an informal response under Sec. 107.317, or request a
formal administrative hearing under Sec. 107.319.
(c) If the person makes an informal response or requests a formal
administrative hearing, the Associate Administrator forwards the
inspection report, ticket and response to the Office of the Chief
Counsel for processing under Sec. Sec. 107.307-107.339, except that the
Office of the Chief Counsel will not issue a Notice of Probable
Violation under Sec. 107.311. The Office of the Chief Counsel may
impose a civil penalty that does not exceed the proposed full penalty
set forth in the ticket.
(d) Payment of the ticket penalty amount must be made in accordance
with the instructions on the ticket.
(e) If within 45 days of receiving the ticket the person does not
pay the ticket amount, make an informal response, or request a formal
administrative hearing, the person has waived the right to make an
informal response or request a hearing, has admitted the violation and
owes the ticket penalty amount to PHMSA.
[Amdt. 107-36, 61 FR 7183, Feb. 26, 1996, as amended at 66 FR 45377,
Aug. 28, 2001]
Sec. 107.311 Notice of probable violation.
(a) The Office of Chief Counsel may serve a notice of probable
violation on a person alleging the violation of one or more provisions
of the Federal hazardous material transportation law or any provision of
this subchapter or subchapter C of this chapter, or any exemption, or
order issued thereunder.
(b) A notice of probable violation issued under this section
includes the following information:
(1) A citation of the provisions of the Federal hazardous material
transportation law, an order issued thereunder, this subchapter,
subchapter C of this chapter, or the terms of any exemption issued
thereunder which the Office of Chief Counsel believes the respondent is
violating or has violated.
(2) A statement of the factual allegations upon which the demand for
remedial action, a civil penalty, or both, is based.
(3) A statement of the respondent's right to present written or oral
explanations, information, and arguments in answer to the allegations
and in mitigation of the sanction sought in the notice of probable
violation.
(4) A statement of the respondent's right to request a hearing and
the procedures for requesting a hearing.
(5) In addition, in the case of a notice of probable violation
proposing a compliance order, a statement of the proposed actions to be
taken by the respondent to achieve compliance.
(6) In addition, in the case of a notice of probable violation
proposing a civil penalty:
(i) A statement of the maximum civil penalty for which the
respondent may be liable;
(ii) The amount of the preliminary civil penalty being sought by the
Office of Chief Counsel, constitutes the maximum amount the Chief
Counsel may seek throughout the proceeding; and
(iii) A description of the manner in which the respondent makes
payment of any money due the United States as a result of the
proceeding.
(c) The Office of Chief Counsel may amend a notice of probable
violation at any time before issuance of a compliance order or an order
assessing a civil penalty. If the Office of Chief Counsel alleges any
new material facts or seeks new or additional remedial action or an
increase in the amount of the proposed civil penalty, it issues a new
notice of probable violation under this section.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 50 FR 45730,
Nov. 1, 1985; Amdt. 107-24, 56 FR 8624, Feb. 28, 1991; Amdt. 107-32, 59
FR 49131, Sept. 26, 1994; Amdt. 107-35, 60 FR 49108, Sept. 21, 1995;
Amdt. 107-36, 61 FR 7184, Feb. 26, 1996]
Sec. 107.313 Reply.
(a) Within 30 days of receipt of a notice of probable violation, the
respondent must either:
(1) Admit the violation under Sec. 107.315;
(2) Make an informal response under Sec. 107.317; or
(3) Request a hearing under Sec. 107.319.
(b) Failure of the respondent to file a reply as provided in this
section constitutes a waiver of the respondent's
[[Page 37]]
right to appear and contest the allegations and authorizes the Chief
Counsel, without further notice to the respondent, to find the facts to
be as alleged in the notice of probable violation and issue an order
directing compliance or assess a civil penalty, or, if proposed in the
notice, both. Failure to request a hearing under paragraph (a)(3) of
this section constitutes a waiver of the respondent's right to a
hearing.
(c) Upon the request of the respondent, the Office of Chief Counsel
may, for good cause shown and filed within the 30 days prescribed in the
notice of probable violation, extend the 30-day response period.
Sec. 107.315 Admission of violations.
(a) In responding to a notice of probable violation issued under
Sec. 107.311, the respondent may admit the alleged violations and agree
to accept the terms of a proposed compliance order or to pay the amount
of the preliminarily assessed civil penalty, or, if proposed in the
notice, both.
(b) If the respondent agrees to the terms of a proposed compliance
order, the Chief Counsel issues a final order prescribing the remedial
action to be taken by the respondent.
(c) Payment of a civil penalty, when the amount of the penalty
exceeds $10,000, must be made by wire transfer, through the Federal
Reserve Communications System (Fedwire), to the account of the U.S.
Treasury. Detailed instructions on making payments by wire transfer may
be obtained from the Financial Operations Division (AMZ-120), Federal
Aviation Administration, Mike Monroney Aeronautical Center, P.O. Box
25082, Oklahoma City, OK 73125.
(d) Payment of a civil penalty, when the amount of the penalty is
$10,000 or less, must be made either by wire transfer, as set forth in
paragraph (c) of this section, or certified check or money order payable
to ``U.S. Department of Transportation'' and submitted to the Financial
Operations Division (AMZ-120), Federal Aviation Administration, Mike
Monroney Aeronautical Center, P.O. Box 25082, Oklahoma City, OK 73125.
[Amdt. 107-11, 48 FR 265l, Jan. 20, 1983, as amended by Amdt. 107-23, 57
FR 45453, Oct. 1, 1992; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; Amdt.
107-38, 61 FR 21100, May 9, 1996; 68 FR 52848, Sept. 8, 2003]
Sec. 107.317 Informal response.
(a) In responding to a notice of probable violation under Sec.
107.311, the respondent may submit to the official who issued the
notice, written explanations, information, or arguments in response to
the allegations, the terms of a proposed compliance order, or the amount
of the preliminarily assessed civil penalty.
(b) The respondent may include in his informal response a request
for a conference. Upon the request of the respondent, the conference may
be either in person or by telephone. A request for a conference must set
forth the issues the respondent will raise at the conference.
(c) Upon receipt of a request for a conference under paragraph (b)
of this section, the Chief Counsel's Office, in consultation with the
Associate Administrator, arranges for a conference as soon as
practicable at a time and place of mutual convenience.
(d) The respondent's written explanations, information, and
arguments as well as the respondent's presentation at a conference are
considered by the Chief Counsel in reviewing the notice of probable
violation. Based upon a review of the proceeding, the Chief Counsel may
dismiss the notice of probable violation in whole or in part. If he does
not dismiss it in whole, he issues an order directing compliance or
assessing a civil penalty, or, if proposed in the notice, both.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-23, 56
FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]
Sec. 107.319 Request for a hearing.
(a) In responding to a notice of probable violation under Sec.
107.311, the respondent may request a formal administrative hearing on
the record before an Administrative Law Judge (ALJ) obtained by the
Office of the Chief Counsel.
[[Page 38]]
(b) A request for a hearing under paragraph (a) of this section
must:
(1) State the name and address of the respondent and of the person
submitting the request if different from the respondent;
(2) State which allegations of violations, if any, are admitted; and
(3) State generally the issues to be raised by the respondent at the
hearing. Issues not raised in the request are not barred from
presentation at the hearing; and
(4) Be addressed to the official who issued the notice.
(c) After a request for a hearing that complies with the
requirements of paragraph (b) of this section, the Chief Counsel obtains
an ALJ to preside over the hearing and notifies the respondent of this
fact. Upon assignment of an ALJ, further matters in the proceeding
generally are conducted by and through the ALJ, except that the Chief
Counsel and respondent may compromise or settle the case under Sec.
107.327 of this subpart without order of the ALJ or voluntarily dismiss
the case under Rule 41(a)(1) of the Federal Rules of Civil Procedure
without order of the ALJ; in the event of such a compromise, settlement
or dismissal, the Chief Counsel expeditiously will notify the ALJ
thereof.
(d) At any time after requesting a formal administrative hearing but
prior to the issuance of a decision and final order by the ALJ, the
respondent may withdraw such request in writing, thereby terminating the
jurisdication of the ALJ in the case. Such a withdrawal constitutes an
irrevocable waiver of respondent's right to such a hearing on the facts,
allegations, and proposed sanction presented in the notice of probable
violation to which the request for hearing relates.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 48 FR 17094,
Apr. 21, 1983; Amdt. No. 107-19, 54 FR 22899, May 30, 1989]
Sec. 107.321 Hearing.
(a) To the extent practicable, the hearing is held in the general
vicinity of the place where the alleged violation occurred or at a place
convenient to the respondent. Testimony by witnesses shall be given
under oath and the hearing shall be recorded verbatim.
(b) Hearings are conducted in accordance with the Federal Rules of
Evidence and Federal Rules of Civil Procedure; however, the ALJ may
modify them as he determines necessary in the interest of a full
development of the facts. In addition, the ALJ may:
(1) Administer oaths and affirmations;
(2) Issue subpoenas as provided by Sec. 105.45;
(3) Adopt procedures for the submission of motions, evidence, and
other documents pertinent to the proceeding;
(4) Take or cause depositions to be taken;
(5) Rule on offers of proof and receive relevant evidence;
(6) Examine witnesses at the hearing;
(7) Convene, recess, reconvene, adjourn and otherwise regulate the
course of the hearing;
(8) Hold conferences for settlement, simplification of the issues,
or any other proper purpose; and
(9) Take any other action authorized by, or consistent with, the
provisions of this subpart and permitted by law which may expedite the
hearing or aid in the disposition of an issue raised therein.
(c) The official who issued the notice of probable violation, or his
representative, has the burden of proving the facts alleged therein.
(d) The respondent may appear and be heard on his own behalf or
through counsel of his choice. The respondent or his counsel may offer
relevant information including testimony which he believes should be
considered in opposition to the allegations or which may bear on the
sanction being sought and conduct such cross-examination as may be
required for a full disclosure of the facts.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 67 FR 61011,
Sept. 27, 2002]
Sec. 107.323 ALJ's decision.
(a) After consideration of all matters of record in the proceeding,
the ALJ shall issue an order dismissing the notice of probable violation
in whole or in part or granting the sanction sought by the Office of
Chief Counsel in the notice. If the ALJ does not dismiss the notice of
probable violation in whole, he issues an order directing compliance
[[Page 39]]
or assessing a civil penalty, or, if proposed in the notice, both. The
order includes a statement of the findings and conclusions, and the
reasons therefore, on all material issues of fact, law, and discretion.
(b) If, within 20 days of receipt of an order issued under paragraph
(a) of this section, the respondent does not submit in writing his
acceptance of the terms of an order directing compliance, or, where
appropriate, pay a civil penalty, or file an appeal under Sec. 107.325,
the case may be referred to the Attorney General with a request that an
action be brought in the appropriate United States District Court to
enforce the terms of a compliance order or collect the civil penalty.
Sec. 107.325 Appeals.
(a) Hearing proceedings. A party aggrieved by an ALJ's decision and
order issued under Sec. 107.323, may file a written appeal in
accordance with paragraph (c) of this section with the Administrator,
Office of the Administrator, Pipeline and Hazardous Materials Safety
Administration, 400 Seventh Street, SW., Washington, DC 20590-0001.
(b) Non-Hearing proceedings. A respondent aggrieved by an order
issued under Sec. 107.317, may file a written appeal in accordance with
paragraph (c) of this section with the Administrator, Office of the
Administrator, Pipeline and Hazardous Materials Safety Administration,
400 Seventh Street, SW., Washington, DC 20590-0001.
(c) An appeal of an order issued under this subpart must:
(1) Be filed within 20 days of receipt of the order by the appealing
party; and
(2) State with particularity the findings in the order that the
appealing party challenges, and include all information and arguments
pertinent thereto.
(d) If the Administrator, PHMSA, affirms the order in whole or in
part, the respondent must comply with the terms of the decision within
20 days of the respondent's receipt thereof, or within the time
prescribed in the order. If the respondent does not comply with the
terms of the decision within 20 days of receipt, or within the time
prescribed in the order, the case may be referred to the Attorney
General for action to enforce the terms of the decision.
(e) The filing of an appeal stays the effectiveness of an order
issued under Sec. 107.317 or Sec. 107.323. However, if the
Administrator, PHMSA, determines that it is in the public interest, he
may keep an order directing compliance in force pending appeal.
[70 FR 56090, Sept. 23, 2005]
Sec. 107.327 Compromise and settlement.
(a) At any time before an order issued under Sec. 107.317 or Sec.
107.323 is referred to the Attorney General for enforcement, the
respondent or the Office of Chief Counsel may propose a compromise as
follows:
(1) In civil penalty cases, the respondent or Chief Counsel may
offer to compromise the amount of the penalty by submitting an offer for
a specific amount to the other party. An offer of compromise by the
respondent shall be submitted to the Chief Counsel who may, after
consultation with the Associate Administrator, accept or reject it.
(i) A compromise offer stays the running of any response period then
outstanding.
(ii) If a compromise is agreed to by the parties, the respondent is
notified in writing. Upon receipt of payment by Office of Chief Counsel,
the respondent is notified in writing that acceptance of payment is in
full satisfaction of the civil penalty proposed or assessed, and Office
of Chief Counsel closes the case with prejudice to the respondent.
(iii) If a compromise cannot be agreed to, the respondent is
notified in writing and is given 10 days or the amount of time remaining
in the then outstanding response period, whichever is longer, to respond
to whatever action was taken by the Office of Chief Counsel or the
Administrator, PHMSA.
(2) In compliance order cases, the respondent may propose a consent
agreement to the Chief Counsel. If the Chief Counsel accepts the
agreement, he issues an order in accordance with its terms. If the Chief
Counsel rejects the
[[Page 40]]
agreement, he directs that the proceeding continue. An agreement
submitted to the Chief Counsel must include:
(i) A statement of any allegations of fact which the respondent
challenges;
(ii) The reasons why the terms of a compliance order or proposed
compliance order are or would be too burdensome for the respondent, or
why such terms are not supported by the record in the case;
(iii) A proposed compliance order suitable for issuance by the Chief
Counsel;
(iv) An admission of all jurisdictional facts; and
(v) An express waiver of further procedural steps and all right to
seek judicial review or otherwise challenge or contest the validity of
the order.
(b) Notwithstanding paragraph (a)(1) of this section, the respondent
or Office of Chief Counsel may propose to settle the case. If the Chief
Counsel agrees to a settlement, the respondent is notified and the case
is closed without prejudice to the respondent.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 50 FR 45730,
Nov. 1, 1985; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; 56 FR 15510, Apr.
17, 1991; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; 66 FR 45377, Aug. 28,
2001]
Sec. 107.329 Maximum penalties.
(a) A person who knowingly violates a requirement of the Federal
hazardous material transportation law, an order issued thereunder, this
subchapter, subchapter C of this chapter, or an exemption issued under
this subchapter applicable to the transporting of hazardous materials or
the causing of them to be transported or shipped is liable for a civil
penalty of not more than $32,500 and not less than $275 for each
violation. (For a violation that occurred after January 21, 1997, and
before October 1, 2003, the maximum and minimum civil penalties are
$27,500 and $250, respectively.) When the violation is a continuing one,
each day of the violation constitutes a separate offense.
(b) A person who knowingly violates a requirement of the Federal
hazardous material transportation law, an order issued thereunder, this
subchapter, subchapter C of this chapter, or an exemption issued under
this subchapter applicable to the manufacture, fabrication, marking,
maintenance, reconditioning, repair, or testing of a packaging or
container which is represented, marked, certified or sold by that person
as being qualified for use in the transportation of hazardous materials
in commerce is liable for a civil penalty of not more than $32,500 and
not less than $275 for each violation. (For a violation that occurred
after January 21, 1997, and before October 1, 2003, the maximum and
minimum civil penalties are $27,500 and $250, respectively.)
[Amdt. 107-24, 56 FR 8624, Feb. 28, 1991, as amended by Amdt. 107-32, 59
FR 49131, Sept. 26, 1994; Amdt. 17-40, 62 FR 2971, Jan. 21, 1997; 65 FR
58618, Sept. 29, 2000; 68 FR 52848, Sept. 8, 2003]
Sec. 107.331 Assessment considerations.
After finding a knowing violation under this subpart, the Office of
Chief Counsel assesses a civil penalty taking the following into
account:
(a) The nature and circumstances of the violation;
(b) The extent and gravity of the violation;
(c) The degree of the respondent's culpability;
(d) The respondent's prior violations;
(e) The respondent's ability to pay;
(f) The effect on the respondent's ability to continue in business;
and
(g) Such other matters as justice may require.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-30, 58
FR 50500, Sept. 27, 1993; Amdt. 107-38, 61 FR 21100, May 9, 1996]
Criminal Penalties
Sec. 107.333 Criminal penalties generally.
A person who knowingly violates Sec. 171.2(g) or willfully violates
a provision of the Federal hazardous material transportation law or an
order or regulation issued thereunder shall be fined under title 18,
United States Code, or imprisoned for not more than 5 years, or both.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-32, 59
FR 49131, Sept. 26, 1994]
[[Page 41]]
Sec. 107.335 Referral for prosecution.
If the Associate Administrator becomes aware of a possible willful
violation of the Federal hazardous material transportation law, this
subchapter, subchapter C of this chapter, or any exemption, or order
issued thereunder, for which the Associate Administrator exercises
enforcement responsibility, it shall report it to the Office of the
Chief Counsel, Pipeline and Hazardous Materials Safety Administration,
U.S. Department of Transportation, Washington, DC 20590-0001. If
appropriate, the Chief Counsel refers the report to the Department of
Justice for criminal prosecution of the offender.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-22, 55
FR 39978, Oct. 1, 1990; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; 56 FR
15510, Apr. 17, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt.
107-35, 60 FR 49108, Sept. 21, 1995; 66 FR 45377, Aug. 28, 2001]
Sec. 107.336 Limitation on fines and penalties.
If a State or political subdivision or Indian tribe assesses any
fine or penalty determined by the Secretary to be appropriate for a
violation concerning a subject listed in Sec. 107.202(a), no additional
fine or penalty may be assessed for such violation by any other
authority.
[Amdt. 107-24, 56 FR 8624, Feb. 28, 1991]
Injunctive Action
Sec. 107.337 Injunctions generally.
Whenever it appears to the Office of Chief Counsel that a person has
engaged, or is engaged, or is about to engage in any act or practice
constituting a violation of any provision of the Federal hazardous
material transportation law, this subchapter, subchapter C of this
chapter, or any exemption, or order issued thereunder, for which the
Office of Chief Counsel exercises enforcement responsibility, the
Administrator, PHMSA, or his delegate, may request the Attorney General
to bring an action in the appropriate United States District Court for
such relief as is necessary or appropriate, including mandatory or
prohibitive injunctive relief, interim equitable relief, and punitive
damages as provided by 49 U.S.C. 5122(a).
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-32, 59
FR 49131, Sept. 26, 1994]
Sec. 107.339 Imminent hazards.
Whenever it appears to the Office of the Chief Counsel that there is
a substantial likelihood that death, serious illness, or severe personal
injury will result from the transportation of a particular hazardous
material or hazardous materials container, before a compliance order
proceeding or other administrative hearing or formal proceeding to abate
the risk of that harm can be completed, the Administrator, PHMSA, or his
delegate, may bring an action under 49 U.S.C. 5122(b) in the appropriate
United States District Court for an order suspending or restricting the
transporation of that hazardous material or those containers or for such
other equitable relief as is necessary or appropriate to ameliorate the
hazard.
[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51
FR 34987, Oct. 1, 1986; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994]
Appendix A to Subpart D of Part 107--Guidelines for Civil Penalties
I. This appendix sets forth the guidelines used by the Office of
Hazardous Materials Safety (as of October 1, 2003) in making initial
baseline determinations for recommending civil penalties. The first part
of these guidelines is a list of baseline amounts or ranges for probable
violations frequently cited in enforcement reports referred for action.
Following the list of violations are general guidelines used by OHMS in
making initial penalty determinations in enforcement cases.
II. List of Frequently Cited Violations
II.--List of Frequently Cited Violations
------------------------------------------------------------------------
Violation description Section or cite Baseline assessment
------------------------------------------------------------------------
General Requirements
------------------------------------------------------------------------
A. Registration
requirements:
[[Page 42]]
Failure to register as 107.608, 107.612.... $1,000 + $500 each
an offeror or carrier additional year.
of hazardous material
and pay registration
fee.
B. Training requirements:
1. Failure to provide 172.702.............
initial training to
hazmat employees
(general awareness,
function-specific,
safety, and security
awareness training):.
a. more than 10 .................... $700 and up each
hazmat employees. area.
b. 10 hazmat .................... $400 and up each
employees or fewer. area.
2. Failure to provide 172.702.............
recurrent training to
hazmat employees
(general awareness,
function-specific,
safety, and security
awareness training).
a. more than 10 .................... $400 and up each
hazmat employees. area.
b. 10 hazmat .................... $275 and up each
employees or fewer. area.
3. Failure to provide in 172.702.............
depth security training
(when a security plan
is required).
a. no security plan .................... included in penalty
developed. for no security
plan $2,500.
b. security plan
developed but
employee not
trained.
4. Failure to create and 172.704.............
maintain training
records.
a. more than 10 .................... $800 and up.
hazmat employees.
b. 10 hazmat .................... $500 and up.
employees or fewer.
C. Security plans:
1. Failure to develop a 172.800.............
security plan; failure
to adhere to security
plan.
a. No security plan .................... $6,000 and up.
at all; no
adherence.
b. Incomplete .................... $2,000 and up for
security plan or each element.
incomplete
adherence (one or
more of three
required elements
missing).
2. Failure to update a 172.802(b).......... $2,000 and up.
security plan to
reflect changing
circumstances.
3. Failure to put 172.800(b).......... $2,000 and up.
security plan in
writing; failure to
make all copies
identical.
D. Notification to a foreign
shipper:
Failure to provide 171.12(a)........... $1,500 to $7,500
information of HMR (corresponding to
requirements applicable violations by
to a shipment of foreign offeror or
hazardous materials forwarding agent).
within the United
States, to a foreign
offeror or forwarding
agent at the place of
entry into the U.S.
E. Expired Exemption:
Offering or transporting 171.2(a), (b), (c), $1,000 + $500 each
a hazardous material, Various. additional year.
or otherwise performing
a function covered by
an exemption, after
expiration of the
exemption.
-----------------------------
Offeror Requirements--All hazardous materials
------------------------------------------------------------------------
A. Undeclared Shipment:
Offering for 172.200, 172.300, $15,000 and up.
transportation a 172.400, 172.500.
hazardous material
without shipping
papers, package
markings, labels, or
placards.
B. Shipping Papers:
1. Failure to provide a 172.201............. $3,000 to $6,000.
shipping paper for a
shipment of hazardous
materials.
2. Failure to follow one 172.201(a)(1)....... $1,200.
or more of the three
approved formats for
listing hazardous
materials on a shipping
paper.
3. Failure to retain 172.201(e).......... $1,000.
shipping papers for 375
days after a hazardous
material (or 3 years
for a hazardous waste)
is accepted by the
initial carrier.
4. Failure to include a 172.202............. $800 to $1,600.
proper shipping name in
the shipping
description or using an
incorrect proper
shipping name.
5. Failure to include a 172.202............. $1,000 to $2,000.
hazard class/division
number in the shipping
description.
6. Failure to include an 172.202............. $1,000 to $2,000.
identification number
in the shipping
description.
7. Using an incorrect 172.202.............
hazard class/
identification number:.
a. that does not .................... $800.
affect
compatibility
requirements.
b. that affects .................... $3,000 to $6,000.
compatibility
requirements.
8. Using an incorrect 172.202.............
identification number:.
a. that does not .................... $800.
change the response
information.
b. that changes the .................... $3,000 to $6,000.
response
information.
9. Failure to include 172.202............. $1,200.
the Packing Group, or
using an incorrect
Packing Group.
[[Page 43]]
10. Using a shipping 172.202............. $800.
description that
includes additional
unauthorized
information (extra or
incorrect words).
11. Using a shipping 172.202............. $500.
description not in
required sequence.
12. Using a shipping 172.202.............
description with two or
more required elements
missing or incorrect:.
a. such that the .................... $3,000.
material is
misdescribed.
b. such that the .................... $6,000.
material is
misclassified.
13. Failure to include 172.202(c).......... $500.
the total quantity of
hazardous material
covered by a shipping
description.
14. Failure to list an 172.203(a).......... $800.
exemption number in
association with the
shipping description.
15. Failure to indicate 172.203(b).......... $500.
``Limited Quantity'' or
``Ltd Qty'' following
the basic shipping
description of a
material offered for
transportation as a
limited quantity.
16. Failure to include 172.203(c)(2)....... $500.
``RQ'' in the shipping
description to identify
a material that is a
hazardous substance.
17. Failure to include a 172.203(k).......... $1,000.
required technical name
in parenthesis for a
listed generic or
``n.o.s.'' material.
18. Failure to include 172.204............. $1,000.
the required shipper's
certification on a
shipping paper.
19. Failure to sign the 172.204............. $800.
required shipper's
certification on a
shipping paper.
C. Emergency Response
Information Requirements:
1. Providing or listing 172.602.............
incorrect emergency
response information
with or on a shipping
paper.
a. No significant .................... $800.
difference in
response.
b. Significant .................... $3,000 to $6,000.
difference in
response.
2. Failure to include an 172.604............. $2,600.
emergency response
telephone number on a
shipping paper.
3. Failure to have the 172.604............. $1,300.
emergency response
telephone number
monitored while a
hazardous material is
in transportation or
listing multiple
telephone numbers
(without specifying the
times for each) that
are not monitored 24
hours a day.
4. Listing an 172.604............. $2,600 to $4,200.
unauthorized emergency
response telephone
number on a shipping
paper.
5. Listing an incorrect 172.604............. $1,300.
or non-working
emergency response
telephone number on a
shipping paper.
6. Failure to provide 172.604............. $1,300.
required technical
information when the
listed emergency
response telephone
number is contacted.
D. Package Marking
Requirements:
1. Failure to mark the 172.301(a).......... $800 to $1,600.
proper shipping name on
a package or marking an
incorrect shipping name
on a package.
2. Failure to mark the 172.301(a).......... $1,000 to $2,000.
identification number
on a package.
3. Marking a package 172.301(a)..........
with an incorrect
identification number.
a. that does not .................... $800.
change the response
information.
b. that changes the .................... $3,000 to $6,000.
response
information.
4. Failure to mark the 172.301(a).......... $3,000 to $6,000.
proper shipping name
and identification
number on a package.
5. Marking a package 172.301(a)..........
with an incorrect
shipping name and
identification number.
a. that does not .................... $1,500 to $3,000.
change the response
information.
b. that changes the .................... $3,000 to $6,000.
response
information.
6. Failure to include 172.301(c).......... $1,000.
the required technical
name(s) in parenthesis
for a listed generic or
``n.o.s.'' entry.
7. Marking a package as 172.303(a).......... $800.
containing hazardous
material when it
contains no hazardous
material.
8. Failure to locate 172.304(a)(4)....... $800.
required markings away
from other markings
that could reduce their
effectiveness.
9. Failure to mark a 172.312............. $2,500 to $3,500.
package containing
liquid hazardous
materials with required
orientation marking.
10. Failure to mark 172.324(b).......... $500.
``RQ'' on a non-bulk
package containing a
hazardous substance.
E. Package Labeling
Requirements:
1. Failure to label a 172.400............. $5,000.
package.
2. Placing a label that 172.400............. $5,000.
represents a hazard
other than the hazard
presented by the
hazardous material in
the package.
3. Placing a label on a 172.401(a).......... $800.
package that does not
contain a hazardous
material.
4. Failure to place a 172.402............. $500 to $2,500.
required subsidiary
label on a package.
5. Placing a label on a 172.406(a).......... $800.
different surface of
the package than, or
away from, the proper
shipping name.
6. Placing an improper 172.407(c).......... $800.
size label on a package.
[[Page 44]]
7. Placing a label on a 172.407(d).......... $600 to $2,500.
package that does not
meet color
specification
requirements (depending
on the variance).
8. Failure to provide an 172.411............. $2,500.
appropriate class or
division number on a
label.
F. Placarding Requirements:
Failure to properly 172.504.............
placard a freight
container or vehicle
containing hazardous
materials:.
a. when Table 1 is .................... $1,000 to $9,000.
applicable.
b. when Table 2 is .................... $800 to $7,200.
applicable.
G. Packaging Requirements:
1. Offering a hazardous Various.............
material for
transportation in an
unauthorized non-UN
standard or
nonspecification
packaging (includes
failure to comply with
the terms of an
exemption authorizing
use of a nonstandard or
nonspecification
packaging).
a. Packing Group I .................... $9,000.
(and Sec. 172.504
Table I materials).
b. Packing Group II. .................... $7,000.
c. Packing Group III .................... $5,000.
2. Offering a hazardous 178.601 & Various...
material for
transportation in a
self-certified
packaging that has not
been subjected to
design qualification
testing:.
a. Packing Group I .................... $10,800.
(and Sec. 172.504
Table I materials).
b. Packing Group II. .................... $8,400.
c. Packing Group III .................... $6,000.
3. Offering a hazardous 178.503(a).......... $3,600.
material for
transportation in a
packaging that has been
successfully tested to
an applicable UN
standard but is not
marked with the
required UN marking.
4. Failure to close a UN 173.22(a)(4)........ $2,500.
standard packaging in
accordance with the
closure instructions.
5. Offering a hazardous 173.24(b)...........
material for
transportation in a
packaging that leaks
during conditions
normally incident to
transportation:
a. Packing Group I .................... $12,000.
(and Sec. 172.504
Table I materials).
b. Packing Group II. .................... $9,000.
c. Packing Group III .................... $6,000.
6. Overfilling or 173.24(b)...........
underfilling a package
so that the
effectiveness is
substantially reduced:
a. Packing Group I .................... $9,000.
(and Sec. 172.504
Table I materials).
b. Packing Group II. .................... $6,000.
c. Packing Group III .................... $3,000.
7. Offering a hazardous 171.14..............
material for
transportation after
October 1, 1996, in a
unauthorized non-UN
standard packaging
marked as manufactured
to a DOT specification:
a. packaging meets .................... $3,000.
DOT specification.
b. packaging does .................... $5,000 to $9,000.
not meet DOT
specification.
8. Failure to mark an 173.25(a)(4)........ $3,000.
overpack with a
statement that the
inside packages comply
with prescribed
specifications or
standards when
specification or
standard packaging is
required.
9. Filling an IBC or a 173.32(a), 180.352,
portable tank (DOT, UN, 180.605.
or IM) that is out of
test and offering
hazardous materials for
transportation in that
IBC or portable tank.
a. All testing .................... $3,500 to $7,000.
overdue.
b. Only periodic (5 .................... $3,500.
year) test overdue.
c. Only intermediate .................... $3,500.
periodic (2.5 year)
tests overdue.
10. Failure to provide 173.32(f)(6)........ $6,000 to $12,000.
the required outage in
a portable tank that
results in a release of
hazardous materials.
-----------------------------
Offeror Requirements--Specific hazardous materials
------------------------------------------------------------------------
A. Cigarette Lighters:
Offering for 173.21(i)........... $7,500.
transportation an
unapproved cigarette
lighter, lighter
refill, or similar
device, equipped with
an ignition element and
containing fuel.
B. Class 1--Explosives:
1. Failure to mark the 172.320............. $1,200.
package with the EX
number for each
substance contained in
the package or,
alternatively, indicate
the EX number for each
substance in
association with the
description on the
shipping description.
2. Offering an .................... 173.54,
unapproved explosive
for transportation:
a. Div. 1.3 and 1.4 173.56(b)........... $5,000 to $10,000.
fireworks meeting
the chemistry
requirements
(quantity and type)
of APA Standard 87-
1.
b. All other .................... $10,000 and up.
explosives
(including
forbidden).
3. Offering a leaking or 173.54(c)........... $10,000 and up.
damaged package of
explosives for
transportation.
[[Page 45]]
4. Packaging explosives 173.61.............. $2,500 to $5,000.
in the same outer
packaging with other
materials.
C. Class 7--Radioactive
Materials:
1. Failure to include 172.203(d).......... $1,000 to $3,000.
required additional
entries, or providing
incorrect information
for these additional
entries.
2. Failure to mark the 172.310(a).......... $800.
gross mass on the
outside of a package of
Class 7 material that
exceeds 110 pounds.
3. Failure to mark each 172.310(b).......... $800.
package in letters at
least 13 mm (\1/2\
inch) high with the
words ``Type A'' or
``Type B'' as
appropriate.
4. Placing a label on 172.403............. $5,000.
Class 7 material that
understates the proper
label category.
5. Placing a label on 172.403(g).......... $2,000 to $4,000.
Class 7 material that
fails to contain (or
has erroneous) entries
for the name of the
radionuclide(s),
activity, and transport
index.
6. Failure to meet one 173.410............. $5,000.
or more of the general
design requirements for
a package used to ship
a Class 7 material.
7. Failure to comply 173.411............. $5,000.
with the industrial
packaging (IP)
requirements when
offering a Class 7
material for
transportation.
8. Failure to provide a 173.412(a).......... $2,000.
tamper-indicating
device on a Type A
package used to ship a
Class 7 material.
9. Failure to meet the 173.412(b)-(i)...... $5,000.
additional design
requirements of a Type
A package used to ship
a Class 7 material.
10. Failure to meet the 173.412(j)-(l)...... $8,400.
performance
requirements for a Type
A package used to ship
a Class 7 material..
11. Offering a DOT 173.415(a), 173.461 ....................
specification 7A
packaging without
maintaining complete
documentation of tests
and an engineering
evaluation or
comparative data:
a. Tests and .................... $8,400.
evaluation not
performed.
b. Complete records .................... $2,000 to $5,000.
not maintained.
12. Offering any Type B, 173.416............. $9,000.
Type B(U), Type B(M)
packaging that failed
to meet the approved
DOT, NRC or DOE design,
as applicable.
13. Offering a Type B 173.471(a). ....................
packaging without
holding a valid NRC
approval certificate:
a. Never having .................... $3,000.
obtained one.
b. Holding an .................... $1,000.
expired certificate.
14. Failure to meet one 173.420............. $10,800.
or more of the special
requirements for a
package used to ship
uranium hexafluoride.
15. Offering Class 7 173.421(a).......... $4,000.
material for
transportation as a
limited quantity
without meeting the
requirements for
limited quantity.
16. Offering a multiple- 173.423(a).......... $500 to $2,500.
hazard limited quantity
Class 7 material
without addressing the
additional hazard.
17. Offering Class 7 low 173.427(a)(1)....... $6,000.
specific activity (LSA)
materials or surface
contaminated objects
(SCO) with an external
dose rate that exceeds
an external radiation
level of 1 rem/hr at 3
meters from the
unshielded material.
18. Offering Class 7 LSA 173.427(a)(6)....... $1,000.
materials or SCO as
exclusive use without
providing specific
instructions to the
carrier for maintenance
of exclusive use
shipment controls.
19. Offering in excess 173.431............. $12,000.
of Type A quantity of a
Class 7 material in a
Type A packaging.
20. Offering a package 173.441............. $10,000 and up.
that exceeds the
permitted limits for
surface radiation or
transport index.
21. Offering a package 173.443............. $5,000 and up.
without determining the
level of removable
external contamination,
or that exceeds the
limit for removable
external contamination.
22. Storing packages of 173.447(a).......... $5,000 and up.
radioactive material in
a group with a total
transport index more
than 50.
23. Offering for 173.448(e).......... $5,000 and up.
transportation or
transporting aboard a
passenger aircraft any
single package or
overpack of Class 7
material with a
transport index greater
than 3.0.
24. Exporting a Type B, 173.471(d).......... $3,000.
Type B(U), Type B(M),
or fissile package
without obtaining a
U.S. Competent
Authority Certificate
or, after obtaining a
U.S. Competent
Authority Certificate,
failing to submit a
copy to the national
competent authority of
each country into or
through which the
package is transported.
25. Offering special 173.476(a), (b)..... $2,500.
form radioactive
materials without
maintaining a complete
safety analysis or
Certificate of
Competent Authority.
D. Class 2--Compressed Gases ....................
in Cylinders:
1. Filling and offering 173.301(a)(6)....... $4,200 to $10,400.
a cylinder with
compressed gas when the
cylinder is out of test.
[[Page 46]]
2. Failure to check each 173.303(d).......... $5,000.
day the pressure of a
cylinder charged with
acetylene that is
representative of that
day's compression,
after the cylinder has
cooled to a settled
temperature, or failure
to keep a record of
this test for 30 days.
3. Offering a limited 173.306(a)(3), (h).. $1,500 to $6,000.
quantity of a
compressed gas in a
metal container for the
purpose of propelling a
nonpoisonous material
and failure to heat the
cylinder until the
pressure is equivalent
to the equilibrium
pressure at 130 [deg]F,
without evidence of
leakage, distortion, or
other defect.
-----------------------------
Manufacturing, Reconditioning, Retesting Requirements
------------------------------------------------------------------------
A. Third-Party Packaging
Certifiers (General):
Issuing a certification 171.2(e), 178.2(b), $500 per item.
that directs the 178.3(a),
packaging manufacturer 178.503(a).
to improperly mark a
packaging (e.g., steel
drum to be marked UN
4G).
B. Packaging Manufacturers
(General):
1. Failure of a 178.2(c)............ $2,500.
manufacturer or
distributor to notify
each person to whom the
packaging is
transferred of all the
requirements not met at
the time of transfer,
including closure
instructions.
2. Failure to insure a 178.601(b)..........
packaging certified as
meeting the UN standard
is capable of passing
the required
performance testing.
a. Packing Group I .................... $10,800.
(and Sec. 172.504
Table 1 materials).
b. Packing Group II. .................... $8,400.
c. Packing Group III .................... $6,000.
3. Certifying a 178.601(d)..........
packaging as meeting a
UN standard when design
qualification testing
was not performed.
a. Packing Group I .................... $10,800.
(and Sec. 172.504
table 1 materials).
b. Packing Group II. .................... $8,400.
c. Packing Group III .................... $6,000.
4. Failure to conduct 178.601(e).......... $2,000 to $10,800.
periodic retesting on
UN standard packaging
(depending on length of
time and Packing Group).
5. Failure to properly
conduct testing for UN
standard packaging
(e.g., testing with
less weight than marked
on packaging; drop
testing from lesser
height than required;
failing to condition
fiberboard boxes before
design test):.
a. Design 178.601(d).......... $2,000 to $10,800.
qualification
testing.
b. Periodic 178.601(e).......... $500 to $10,800.
retesting.
6. Marking, or causing 178.2(b), 178.3(a), $7,200.
the marking of, a 178.503(a)(8).
packaging with the
symbol of a
manufacturer or
packaging certifier
other than the company
that actually
manufactured or
certified the packaging.
7. Failure to maintain 178.601(l)..........
testing records.
a. Design .................... $1,000 to $5,000.
qualification
testing.
b. Periodic .................... $500 to $2,000.
retesting.
8. Improper marking of 178.503............. $500 per item.
UN certification.
9. Manufacturing DOT 171.14..............
specification packaging
after October 1, 1994
that is not marked as
meeting a UN
performance standard.
a. If packaging does .................... $3,000.
meet DOT
specification.
b. If packaging does .................... $6,000 to $10,800.
not meet DOT
specification.
C. Drum Manufacturers &
Reconditioners:
1. Failure to properly 178.604(b), (d),
conduct production 173.28(b)(2)(i).
leakproofness test on a
new or reconditioned
drum.
a. Improper testing. .................... $2,000.
b. No testing .................... $3,000 to $5,000.
performed.
2. Marking an incorrect 173.28(b)(2)(ii)....
registration number on
a reconditioned drum.
a. Incorrect number. .................... $800.
b. Unauthorized use .................... $7,200.
of another
reconditioner's
number.
3. Representing, 173.28(c), (d)...... $6,000 to $10,800.
marking, or certifying
a drum as a
reconditioned UN
standard packaging when
the drum does not meet
a UN standard.
4. Representing, 173.28(d)........... $500.
marking, or certifying
a drum as altered from
one UN standard to
another, when the drum
has not actually been
altered.
D. IBC and Portable Tank
Requalification:
1. Failure to properly 180.352(e), $500 per item.
mark an IBC or portable 178.703(b),
tank with the most 180.605(k).
current retest and/or
inspection information.
2. Failure to keep 180.352(f),
complete and accurate 180.605(l).
records of IBC or
portable tank retest
and reinspection.
a. No records kept.. .................... $4,000.
b. Incomplete or .................... $1,000 to $3,000.
inaccurate records.
3. Failure to make 180.352(f), 49 $1,000.
reinspection and retest U.S.C. 5121(b)(2).
records available to a
DOT representative upon
request.
[[Page 47]]
E. Cylinder Manufacturers &
Rebuilders:
1. Manufacturing, Various............. $7,500 to $15,000.
representing, marking,
certifying, or selling
a DOT high-pressure
cylinder that was not
inspected and verified
by an approved
independent inspection
agency.
2. Failure to have a Various............. $800.
registration number or
failure to mark the
registration number on
the cylinder.
3. Marking another Various............. $7,200.
company's number on a
cylinder.
4. Failure to mark the 178.65(i)........... $3,000.
date of manufacture or
lot number on a DOT-39
cylinder.
5. Failure to have a Various............. $5,000.
chemical analysis
performed in the U.S.
for a material
manufactured outside
the U.S./failure to
obtain a chemical
analysis from the
foreign manufacturer.
6. Failure to meet wall Various............. $7,500 to $15,000.
thickness requirements.
7. Failure to heat treat Various............. $5,000 to $15,000.
cylinders prior to
testing.
8. Failure to conduct a Various............. $2,500 to $6,200.
complete visual
internal examination.
9. Failure to conduct a Various............. $2,500 to $6,200.
hydrostatic test, or
conducting a
hydrostatic test with
inaccurate test
equipment.
10. Failure to conduct a Various............. $7,500 to $15,000.
flattening test.
11. Failure to conduct a 178.65(f)(2)........ $5,000 to $15,000.
burst test on a DOT-39
cylinder.
12. Failure to have Various............. $7,500 to $15,000.
inspections and
verifications performed
by an inspector.
13. Failure to maintain Various.............
required inspector's
reports.
a. No reports at all .................... $5,000.
b. Incomplete or .................... $1,000 to $4,000.
inaccurate reports.
14. Representing a DOT-4 180.211(a).......... $6,000 to $10,800.
series cylinder as
repaired or rebuilt to
the requirements of the
HMR without being
authorized by the
Associate Administrator.
F. Cylinder Requalification:
1. Failure to remark as 173.23(c)........... $800.
DOT 3AL an aluminum
cylinder manufactured
under a former
exemption.
2. Certifying or marking 180.205(a).......... $800.
as retested a
nonspecification
cylinder.
3. Failure to have 180.205(b).......... $4,000.
retester's
identification number
(RIN).
4. Failure to have 180.205(b).......... $2,000.
current authority due
to failure to renew a
retester's
identification number
(RIN).
5. Failure to have a 180.205(b).......... $7,200.
retester's
identification number
and marking another RIN
on a cylinder.
6. Marking a RIN before 180.205(b).......... $800.
successfully completing
a hydrostatic retest.
7. Representing, 171.2(c), (e), $2,000 to $6,000.
marking, or certifying 178.205(c),
a cylinder as meeting Applicable
the requirements of an Exemption.
exemption when the
cylinder was not
maintained or retested
in accordance with the
exemption.
8. Failure to conduct a 180.205(f).......... $2,100 to $5,200.
complete visual
external and internal
examination.
9. Failure to conduct 180.205(f) & (g).... $4,200 to $10,400.
visual inspection or
hydrostatic retest.
10. Performing 180.205(g)(3)....... $2,100 to $5,200.
hydrostatic retesting
without confirming the
accuracy of the test
equipment.
11. Failure to hold 180.205(g)(5)....... $3,100.
hydrostatic test
pressure for 30 seconds
or sufficiently longer
to allow for complete
expansion.
12. Failure to perform a 180.205(g)(5)....... $3,100.
second retest, after
equipment failure, at a
pressure increased by
the greater of 10% or
100 psi (includes
exceeding 90% of test
pressure prior to
conducting a retest).
13. Failure to condemn a 180.205(i).......... $6,000 to $10,800.
cylinder when required
(e.g., permanent
expansion of 10% [5%
for certain exemption
cylinders], internal or
external corrosion,
denting, bulging,
evidence of rough
usage).
14. Failure to properly 180.205(i)(2)....... $800.
mark a condemned
cylinder or render it
incapable of holding
pressure.
15. Failure to notify 180.205(i)(2)....... $1,000.
the cylinder owner in
writing when a cylinder
has been condemned.
16. Failure to perform 180.209(a)(1)....... $2,100 to $5,200.
hydrostatic retesting
at the minimum
specified test pressure.
17. Marking a star on a 180.209(b).......... $2,000 to $4,000.
cylinder that does not
qualify for that mark.
18. Marking a ``+'' sign 173.302a(b)......... $2,000 to $4,000.
on a cylinder without
determining the average
or minimum wall stress
by calculation or
reference to CGA
Pamphlet C-5.
19. Marking a cylinder 180.213(b).......... $6,000 to $10,800.
in or on the sidewall
when not permitted by
the applicable
specification.
20. Failure to maintain 180.213(b)(1)....... $800.
legible markings on a
cylinder.
21. Marking a DOT 3HT 180.213(c)(2)....... $6,000 to $10,800.
cylinder with a steel
stamp other than a low-
stress steel stamp.
22. Improper marking of 180.213(d).......... $800.
the RIN or retest date
on a cylinder.
23. Marking an FRP Applicable Exemption $6,000 to $10,800.
cylinder with steel
stamps in the FRP area
of the cylinder such
that the integrity of
the cylinder is
compromised.
[[Page 48]]
24. Failure to maintain 180.215(a).......... $600 to $1,200.
current copies of 49
CFR, DOT exemptions,
and CGA Pamphlets
applicable to
inspection, retesting,
and marking activities.
25. Failure to keep 180.215(b)..........
complete and accurate
records of cylinder
reinspection and retest.
a. No records kept.. .................... $4,000.
b. Incomplete or .................... $1,000 to $3,000.
inaccurate records.
26. Failure to report in 171.2(c) & (e), $600 to $1,200.
writing a change in Approval Letter.
name, address,
ownership, test
equipment, management,
or retester personnel.
-----------------------------
Carrier Requirements
------------------------------------------------------------------------
A. Incident Notification:
1. Failure to give 171.15.............. $3,000.
immediate notification
of a reportable
hazardous materials
incident.
2. Failure to file a 171.16.............. $500 to $2,500.
written hazardous
material incident
report within 30 days
following an
unintentional release
of hazardous materials
in transportation (or
other reportable
incident).
B. Shipping Papers:
Failure to retain 174.24(b), $1,000.
shipping papers for 375 175.30(a)(2),
days after a hazardous 176.24(b),
material (or 3 years 177.817(f).
for a hazardous waste)
is accepted by the
initial carrier.
C. Stowage/transportation
Requirements:
1. Transporting packages Various............. $3,000.
of hazardous material
that have not been
secured against
movement.
2. Failure to properly Various............. $7,500 and up.
segregate hazardous
materials.
3. Transporting 177.835(i).......... $5,200.
explosives in a motor
vehicle containing
metal or other articles
or materials likely to
damage the explosives
or any package in which
they are contained,
without segregating in
different parts of the
load or securing them
in place in or on the
motor vehicle and
separated by bulkheads
or other suitable means
to prevent damage.
4. Transporting railway 171.2(b) & (e)...... $7,000.
track torpedoes outside
of flagging kits, in
violation of DOT-E 7991.
5. Transporting Class 7 177.842(a).......... $5,000 and up.
(radioactive) material
having a total
transport index greater
than 50.
6. Transporting Class 7 177.842(b).......... $5,000 and up.
(radioactive) material
without maintaining the
required separation
distance.
7. Failure to comply 171.2(b) & (e)......
with requirements of an
exemption authorizing
the transportation of
Class 7 (radioactive)
material having a total
transportation index of
50.
a. Failure to have .................... $5,000.
the required
radiation survey
record.
b. Failure to have .................... $500 each.
other required
documents.
c. Other violations. .................... $5,000 and up.
------------------------------------------------------------------------
III. Consideration of Statutory Criteria
A. These guidelines are used by the Office of Hazardous Materials
Safety (OHMS) in setting initial proposed penalties for hazmat
violations. They indicate baseline amounts or ranges for probable
violations frequently cited in enforcement reports and set forth general
OHMS policy for considering statutory criteria.
B. The initial baseline determination partially considers the
nature, extent, circumstances, and gravity of the alleged violation.
That determination then is adjusted to consider all other evidence
concerning the nature, extent, circumstances, and gravity of the alleged
violation; degree of culpability; history of prior violations; ability
to pay; effect of the penalty on ability to continue to do business; and
such other matters as justice may require (a major component of which is
corrective action taken by a respondent to prevent a recurrence of
similar violations). In making a penalty recommendation, the baseline or
range may be increased or decreased on the basis of evidence pertaining
to these factors.
C. The following miscellaneous factors are used to implement one or
more of the statutory assessment criteria.
IV. Miscellaneous Factors Affecting Penalty Amounts
A. Corrective Action
1. A proposed penalty is mitigated for documented corrective action
of alleged violations taken by a respondent. Corrective action may
occur: (1) After an inspection and before a Notice of Probable Violation
(NOPV) is issued; (2) on receipt of an NOPV; or (3) after receipt of an
NOPV (possibly
[[Page 49]]
after it is solicited by an PHMSA attorney). In general, corrective
action may reduce a penalty up to 25%. Mitigation may be taken into
account in the referral memo or may be recommended prior to issuance of
an Order by PHMSA's Chief Counsel.
2. The two primary factors in determining the penalty reduction are
extent and timing of the corrective action. In other words, mitigation
will be determined on the basis of how much corrective action was taken
and when it was taken. Systemic action to prevent future violations is
given greater consideration than action simply to remedy violations
identified during the inspection.
3. Mitigation is applied to individual violations. Thus, in a case
with two violations, if corrective action for the first violation is
more extensive than for the second, the penalty for the first will be
mitigated more than that for the second.
B. Respondents That Re-Ship
A shipper that reships materials received from another company, in
the same packaging and without opening or altering the package,
independently is responsible for ensuring that the shipment complies
with Federal hazmat law, and independently may be subject to enforcement
action if the package does not comply. Nevertheless, the reshipper is
considered to have a lesser level of responsibility for compliance in
those respects in which it reasonably relies on the compliance of the
package as received. In most cases of this type, OHMS will discount the
applicable baseline standard by about 25%. The specific knowledge and
expertise of all parties must be considered in discounting for reliance
on a prior shipper. This discount is applied before any consideration of
mitigation based on corrective action.
C. Penalty Increases for Multiple Counts
Under the Federal hazmat law, 49 U.S.C. 5123(a), each violation of
the HMR and each day of a continuing violation (except for violations
pertaining to packaging manufacture or qualification) is subject to a
civil penalty of up to $32,500 ($27,500 for a violation occurring after
January 21, 1997, and before October 1, 2003). Absent aggravating
factors, OHMS, in its exercise of discretion, ordinarily will apply a
single penalty for multiple counts or days of violation. In a number of
cases, particularly those involving shippers, an inspector may cite two
or more similar packaging violations for different hazardous materials.
For example, the inspector may cite the same marking violation for two
or more packages. OHMS usually will consider those additional violations
as counts of the same violation and will not recommend multiples of the
same baseline penalty. Rather, OHMS usually will recommend the baseline
penalty for a single violation, increased by 25% for each additional
violation.
D. Financial Considerations
1. Mitigation is appropriate when the baseline penalty would (1)
exceed an amount that the respondent is able to pay, or (2) have an
adverse effect on the respondent's ability to continue in business.
These criteria relate to a respondent's entire business, and not just
the product line or part of its operations involved in the violation(s).
Beyond the overall financial size of the respondent's business, the
relevant items of information on a respondent's balance sheet include
the current ratio (current assets to current liabilities), the nature of
current assets, and net worth (total assets minus total liabilities).
2. These figures are considered on a case-by-case basis. In general,
however, a current ratio close to or below 1.0 means that the company
may have difficulty in paying a large penalty, and may justify reduction
of the penalty or an installment payment plan. A small amount of cash on
hand representing limited liquidity, even with substantial other current
assets (such as accounts receivable or inventory), may warrant a short-
term payment plan. Respondent's income statement also will be reviewed
to determine whether a payment plan is appropriate.
3. Many companies are able to continue in business for extended
periods of time with a small or negative net worth, and many respondents
have paid substantial civil penalties in installments even though net
worth was negative. For this reason, negative net worth alone does not
always warrant reduction of a proposed penalty or even, in the absence
of factors discussed above, a payment plan.
4. In general, an installment payment plan may be justified where
reduction of a proposed penalty is not, but the appropriateness of
either (or both) will depend on the circumstances of the case. The
length of a payment plan should be as short as possible, but the plan
may consider seasonal fluctuations in a company's income if the
company's business is seasonal (e.g., swimming pool chemical sales,
fireworks sales) or if the company has documented specific reasons for
current non-liquidity.
5. Evidence of financial condition is used only to decrease a
penalty, and not to increase it.
E. Penalty Increases for Prior Violations
The baseline penalty presumes an absence of prior violations. If
prior violations exist, generally they will serve to increase a proposed
penalty. The general standards for increasing a baseline proposed
penalty on the basis of prior violations are as follows:
[[Page 50]]
1. For each prior civil or criminal enforcement case--25% increase
over the pre-mitigation recommended penalty.
2. For each prior ticket--10% increase over the pre-mitigation
recommended penalty.
3. A baseline proposed penalty will not be increased more than 100%
on the basis of prior violations.
4. A case or ticket of prior violations initiated in a calendar year
more than six years before the calendar year in which the current case
is initiated normally will not be considered in determining a proposed
penalty for the current violation(s).
F. Penalty Increases for Use of Expired Exemptions
Adjustments to the base line figures for use of expired exemptions
can be made depending on how much material has been shipped during the
period between the expiration date and the renewal date. If the company
previously has been found to have operated under an expired exemption,
the penalty is normally doubled. If the company has been previously
cited for other violations, the penalty generally will be increased by
about 25%.
[Amdt. 107-33, 60 FR 12141, Mar. 6, 1995, as amended by Amdt. 107-40, 62
FR 2972, 2977, Jan. 21, 1997; 62 FR 51556, Oct. 1, 1997; 65 FR 58618,
Sept. 29, 2000; 66 FR 45180, Aug. 28, 2001; 68 FR 52848, 52855, Sept. 8,
2003; 69 FR 54044, Sept. 7, 2004; 70 FR 56090, Sept. 23, 2005]
Subpart E_Designation of Approval and Certification Agencies
Sec. 107.401 Purpose and scope.
(a) This subpart establishes procedures for the designation of
agencies to issue approval certificates and certifications for types of
packagings designed, manufactured, tested, or maintained in conformance
with the requirements of this subchapter, subchapter C of this chapter,
and standards set forth in the United Nations (U.N.) Recommendations
(Transport of Dangerous Goods). Except for certifications of compliance
with U.N. packaging standards, this subpart does not apply unless made
applicable by a rule in subchapter C of this chapter.
(b) The Associate Administrator may issue approval certificates and
certifications addressed in paragraph (a) of this section.
[Amdt. 107-31, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23,
56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]
Sec. 107.402 Application for designation as an approval or certification
agency.
(a) Any organization or person seeking designation as an approval or
certification agency shall apply in writing to the Associate
Administrator for Hazardous Materials Safety (PHH-32), Department of
Transportation, 400 Seventh Street, SW., Washington DC 20590-0001.
Alternatively, the application with any attached supporting
documentation in an appropriate format may be submitted by facsimile
(fax) to: (202) 366-3753 or (202) 366-3308 or by electronic mail (e-
mail) to: [email protected]. Each application must be signed and
certified to be correct by the applicant or, if the applicant is an
organization, by an authorized officer or official representative of the
organization. Any false statement or representation, or the knowing and
willful concealment of a material fact, may subject the applicant to
prosecution under the provisions of 18 U.S.C. 1001, result in the denial
or termination of a designation.
(b) Each application for designation must be in English and include
the following information:
(1) Name and address of the applicant, including place of
incorporation if a corporation. In addition, if the applicant is not a
resident of the United States, the name and address of a permanent
resident of the United States designated in accordance with Sec. 105.40
to serve as agent for service of process.
(2) If the applicant's principal place of business is in a country
other than the United States, a copy of the designation from the
Competent Authority of that country delegating to the applicant an
approval or designated agency authority for the type of packaging for
which a DOT designation is sought, and a statement that the Competent
Authority also delegates similar authority to U.S. Citizens or
organizations having designations under this subpart from the PHMSA.
(3) A listing, by DOT specification (or exemption) number, or U.N.
designation, of the types of packagings for which approval authority is
sought.
(4) A personnel qualifications plan listing the qualifications that
the applicant will require of each person to
[[Page 51]]
be used in the performance of each packaging approval or certification
function. As a minimum, these qualifications must include:
(i) The ability to review and evaluate design drawings, design and
stress calculations;
(ii) A knowledge of the applicable regulations of subchapter C of
this chapter and, when applicable, U.N. standards; and
(iii) The ability to conduct or monitor and evaluate test procedures
and results; and
(iv) The ability to review and evaluate the qualifications of
materials and fabrication procedures.
(5) A statement that the applicant will perform its functions
independent of the manufacturers and owners of the packagings concerned.
(6) A statement that the applicant will allow the Associate
Administrator or his representative to inspect its records and
facilities in so far as they relate to the approval or certification of
specification packagings and shall cooperate in the conduct of such
inspections.
(c) The applicant shall furnish any additional information relevant
to the applicant's qualifications, if requested by the Associate
Administrator.
[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985; 50 FR 16089, Apr. 24, 1985,
as amended by Amdt. 107-22, 55 FR 39978, Oct. 1, 1990; Amdt. 107-23, 56
FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001; 67 FR 61011, Sept.
27, 2002; 70 FR 56090, Sept. 23, 2005]
Sec. 107.403 Designation of approval agencies.
(a) If the Associate Administrator determines that an application
contains all the required information, the applicant is sent a letter of
designation and assigned an identification code.
(b) If the Associate Administrator determines that an application
does not contain all the required information, the application is denied
and the applicant is sent a written notice containing all the reasons
for the denial.
(c) Within 30 days of an initial denial of an application under
paragraph (b) of this section, the applicant may file an amended
application. If after considering the amended application, the Associate
Administrator determines that it should be denied, he notifies the
applicant, and the denial constitutes the final action of the Associate
Administrator on the application. Within 60 days of receipt of the final
denial the applicant may appeal the denial to the Administrator, PHMSA,
setting forth in writing where the Associate Administrator for Hazardous
Materials Safety erred in this determination.
[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23,
56 FR 66157, Dec. 20, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994;
66 FR 45377, Aug. 28, 2001]
Sec. 107.404 Conditions of designation.
(a) Each designation made under this subpart contains the following
conditions:
(1) The designated approval or certification agency may use only
testing equipment that it has determined, through personal inspection,
to be suitable for the purpose.
(2) Each approval certificate and certification issued by the
designated approval agency must contain the name and identification code
of the approval agency.
(3) Each approval certificate and certification must be in a format
acceptable to the Associate Administrator.
(b) The designated approval agency shall notify the Associate
Administrator within 20 days after the date there is any change in the
information submitted under Sec. 107.402.
(c) The designated approval agency shall comply with all of the
terms and conditions stated in its letter of designation under the
subpart.
(d) Nothing in this part relieves a manufacturer or owner of a
packaging of responsibility for compliance with any of the applicable
requirements of this title.
[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23,
56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]
Sec. 107.405 Termination of designation.
(a) Any designation issued under Sec. 107.403 of this subchapter
may be suspended or terminated if the Associate Administrator determines
that:
(1) The application for designation contained a misrepresentation,
or the applicant willfully concealed a material fact.
[[Page 52]]
(2) The approval agency failed to comply with a term or condition
stated in the agency's letter of designation.
(3) The Competent Authority of an approval agency of a country
outside the United States has failed to initiate, maintain or recognize
a qualified U.S. approval agency.
(b) Before a designation is suspended or terminated, the Associate
Administrator shall give to the approval agency:
(1) Written notice of the facts or conduct believed to warrant
suspension or termination of the designation.
(2) Sixty days in which to show in writing why the designation
should not be suspended or terminated.
[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23,
56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]
Subpart F_Registration of Cargo Tank and Cargo Tank Motor Vehicle
Manufacturers, Assemblers, Repairers, Inspectors, Testers, and Design
Certifying Engineers
Sec. 107.501 Scope.
(a) This subpart establishes a registration procedure for persons
who are engaged in the manufacture, assembly, inspection and testing,
certification, or repair of a cargo tank or a cargo tank motor vehicle
manufactured in accordance with a DOT specification under subchapter C
of this chapter or under terms of an exemption issued under this part.
(b) Persons engaged in continuing qualification and maintenance of
cargo tanks and cargo tank motor vehicles must be familiar with the
requirements set forth in part 180, subpart E, of this chapter.
[Amdt. 107-20, 55 FR 37047, Sept. 7, 1990]
Sec. 107.502 General registration requirements.
(a) Definitions: For purposes of this subpart--
(1) Assembly means the performance of any of the following functions
when the function does not involve welding on the cargo tank wall:
(i) The mounting of one or more tanks or cargo tanks on a motor
vehicle or to a motor vehicle suspension component;
(ii) The installation of equipment or components necessary to meet
the specification requirements prior to the certification of the cargo
tank motor vehicle; or
(iii) The installation of linings, coatings, or other materials to
the inside of a cargo tank wall.
(2) The terms Authorized Inspector, Cargo tank, Cargo tank motor
vehicle, Design Certifying Engineer, Registered Inspector, and Person
are defined in Sec. 171.8 of this chapter.
(3) The terms cargo tank wall and manufacturer are defined in Sec.
178.320(a), and repair is defined in Sec. 180.403 of this chapter.
(b) No person may engage in the manufacture, assembly,
certification, inspection or repair of a cargo tank or cargo tank motor
vehicle manufactured under the terms of a DOT specification under
subchapter C of this chapter or an exemption issued under this part
unless the person is registered with the Department in accordance with
the provisions of this subpart. A person employed as an inspector or
design certifying engineer is considered to be registered if the
person's employer is registered.
(c) A person who performs functions which are subject to the
provisions of this subpart may perform only those functions which have
been identified to the Department in accordance with the procedures of
this subpart.
(d) Registration statements must be in English, contain all of the
information required by this subpart, and be submitted to: FMCSA
Hazardous Materials Division--MC-ECH, Room 8310, 400 7th Street SW,
Washington, DC 20590.
(e) Upon determination that a registration statement contains all
the information required by this subpart, the Department will send the
registrant a letter confirming receipt of the registration application
and assigning a registration number to that person. A separate
registration number will be assigned for each cargo tank manufacturing,
assembly, repair facility or
[[Page 53]]
other place of business identified by the registrant.
[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37047, Sept. 7, 1990,
as amended by Amdt. 107-22, 55 FR 39978, Oct. 1, 1990; Amdt. 107-23, 56
FR 66157, Dec. 20, 1991; Amdt. 107-28, 58 FR 46873, Sept. 3, 1993; Amdt.
107-39, 61 FR 51337, Oct. 1, 1996; 67 FR 61011, Sept. 27, 2002; 68 FR
19273, Apr. 18, 2003]
Sec. 107.503 Registration statement.
(a) Each registration statement must be in English and contain the
following information:
(1) Name;
(2) Street address, mailing address and telephone number for each
facility or place of business;
(3) A statement indicating whether the facility uses mobile testing/
inspection equipment to perform inspections, tests, or repairs at a
location other than the address listed in paragraph (a)(2) of this
section.
(4) A statement signed by the person responsible for compliance with
the applicable requirements of this chapter, certifying knowledge of
those requirements and that each employee who is a Registered Inspector
or Design Certifying Engineer meets the minimum qualification
requirements set forth in Sec. 171.8 of this chapter for ``Registered
Inspector'' or ``Design Certifying Engineer''. The following language
may be used.
I certify that all Registered Inspectors and Design Certifying
Engineers used in performance of the prescribed functions meet the
minimum qualification requirements set forth in 49 CFR 171.8, that I am
the person responsible for ensuring compliance with the applicable
requirements of this chapter, and that I have knowledge of the
requirements applicable to the functions to be performed.
(5) A description of the specific functions to be performed on cargo
tanks or cargo tank motor vehicles, e.g.:
(i) Manufacture,
(ii) Assembly,
(iii) Inspection and testing (specify type, e.g., external or
internal visual inspection, lining inspection, hydrostatic pressure
test, leakage test, thickness test),
(iv) Certification,
(v) Repair, or
(vi) Equipment manufacture;
(6) An identification of the types of DOT specification and
exemption cargo tanks or cargo tank motor vehicles which the registrant
intends to manufacture, assemble, repair, inspect, test or certify;
(7) A statement indicating whether the registrant employs Registered
Inspectors or Design Certifying Engineers to conduct certification,
inspection or testing functions addressed by this subpart. If the
registrant engages a person who is not an employee of the registrant to
perform these functions, provide the name, address and registration
number of that person; and
(8) If the registrant is not a resident of the United States, the
name and address of a permanent resident of the United States designated
in accordance with Sec. 105.40 to serve as agent for service of
process.
(b) In addition to the information required under paragraph (a) of
this section, each person who manufactures a cargo tank or cargo tank
motor vehicle must submit a copy of the manufacturer's current ASME
Certificate of Authorization for the use of the ASME ``U'' stamp.
(c) In addition to the information required under paragraph (a) of
this section, each person who repairs a cargo tank or cargo tank motor
vehicle must submit a copy of the repair facility's current National
Board Certificate of Authorization for the use of the ``R'' stamp or
ASME Certificate of Authorization for the use of the ASME ``U'' stamp.
Any person who repairs MC-series cargo tanks which are not certified to
the ASME Code must submit a copy of the National Board or ASME
Certificate of Authorization to PHMSA before June 30, 1992.
[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37047, Sept. 7, 1990;
57 FR 365, Jan. 6, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994;
Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 63 FR 52846, Oct. 1, 1998; 68
FR 19273, Apr. 18, 2003]
Sec. 107.504 Period of registration, updates, and record retention.
(a) Registration will be for a maximum of six years from the date of
the original registration.
(b) Any correspondence with the Department must contain the
registrant's name and registration number.
[[Page 54]]
(c) A registration must be renewed every six years or within thirty
days of reissuance of an ASME or National Board Certification, whichever
occurs first, by submitting an up-to-date registration statement
containing the information prescribed by Sec. 107.503. Any person
initially registered under the provisions of Sec. 107.502 and who is in
good standing is eligible for renewal.
(d) A registrant shall provide written notification to the
Department within thirty days of any of the following occurrences:
(1) Any change in the registration information submitted under Sec.
107.503;
(2) Replacement of the person responsible for compliance with the
requirements in Sec. 107.503(a)(3). If this occurs, the registrant
shall resubmit the required certification;
(3) Loss of ASME or National Board Certificate of Authorization; or
(4) A change in function; such as, from assembly to manufacture, an
addition of a function, or a change to the types of inspections, tests
or certifications of cargo tanks or cargo tank motor vehicles.
(e) Each registrant shall maintain a current copy of the
registration information submitted to the Department and a current copy
of the registration number identification received from the Department
at the location identified in Sec. 107.503(a)(2) during such time the
person is registered with the Department and for two years thereafter.
(f) The issuance of a registration number under this subpart is not
an approval or endorsement by the Department of the qualifications of
any person to perform the specified functions.
[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37048, Sept. 7, 1990,
as amended by Amdt. 107-20, 56 FR 27875, June 17, 1991; Amdt. 107-37, 61
FR 18931, Apr. 29, 1996]
Subpart G_Registration of Persons Who Offer or Transport Hazardous
Materials
Source: Amdt. No. 107-26, 57 FR 30630, July 9, 1992, unless
otherwise noted.
Sec. 107.601 Applicability.
(a) The registration and fee requirements of this subpart apply to
any person who offers for transportation, or transports, in foreign,
interstate or intrastate commerce--
(1) A highway route-controlled quantity of a Class 7 (radioactive)
material, as defined in Sec. 173.403 of this chapter;
(2) More than 25 kg (55 pounds) of a Division 1.1, 1.2, or 1.3
(explosive) material (see Sec. 173.50 of this chapter) in a motor
vehicle, rail car or freight container;
(3) More than one L (1.06 quarts) per package of a material
extremely toxic by inhalation (i.e., ``material poisonous by
inhalation,'' as defined in Sec. 171.8 of this chapter, that meets the
criteria for ``hazard zone A,'' as specified in Sec. Sec. 173.116(a) or
173.133(a) of this chapter);
(4) A shipment of a quantity of hazardous materials in a bulk
packaging (see Sec. 171.8 of this chapter) having a capacity equal to
or greater than 13,248 L (3,500 gallons) for liquids or gases or more
than 13.24 cubic meters (468 cubic feet) for solids;
(5) A shipment in other than a bulk packaging of 2,268 kg (5,000
pounds) gross weight or more of one class of hazardous materials for
which placarding of a vehicle, rail car, or freight container is
required for that class, under the provisions of subpart F of part 172
of this chapter; or
(6) Except as provided in paragraph (b) of this section, a quantity
of hazardous material that requires placarding, under provisions of
subpart F of part 172 of this chapter.
(b) Paragraph (a)(6) of this section does not apply to those
activities of a farmer, as defined in Sec. 171.8 of this chapter, that
are in direct support of the farmer's farming operations.
(c) In this subpart, the term ``shipment'' means the offering or
loading of hazardous material at one loading facility using one
transport vehicle, or the transport of that transport vehicle.
[65 FR 7309, Feb. 14, 2000, as amended at 67 FR 61011, Sept. 27, 2002]
Sec. 107.606 Exceptions.
(a) The following are excepted from the requirements of this
subpart:
(1) An agency of the Federal government.
(2) A State agency.
[[Page 55]]
(3) An agency of a political subdivision of a State.
(4) An employee of any of those agencies in paragraphs (a)(1)
through (a)(3) of this section with respect to the employee's official
duties.
(5) A hazmat employee (including, for purposes of this subpart, the
owner-operator of a motor vehicle that transports in commerce hazardous
materials, if that vehicle at the time of those activities, is leased to
a registered motor carrier under a 30-day or longer lease as prescribed
in 49 CFR part 376 or an equivalent contractual agreement).
(6) A person domiciled outside the United States, who offers solely
from a location outside the United States, hazardous materials for
transportation in commerce, provided that the country of which such a
person is a domiciliary does not require persons domiciled in the United
States, who solely offer hazardous materials for transportation to the
foreign country from places in the United States, to file a registration
statement or to pay a registration fee.
(b) Upon making a determination that persons domiciled in the United
States, who offer hazardous materials for transportation to a foreign
country solely from places in the United States, must file registration
statements or pay fees to that foreign country, the U.S. Competent
Authority will provide notice of such determination directly to the
Competent Authority of that foreign country and by publication in the
Federal Register. Persons who offer hazardous materials for
transportation to the United States from that foreign country must file
a registration statement and pay the required fee no later than 60 days
following publication of the determination in the Federal Register.
[Amdt 107-34, 60 FR 27233, May 23, 1995, as amended at 63 FR 52847, Oct.
1, 1998]
Sec. 107.608 General registration requirements.
(a) Except as provided in Sec. 107.616(d), each person subject to
this subpart must submit a complete and accurate registration statement
on DOT Form F 5800.2 not later than June 30 for each registration year,
or in time to comply with paragraph (b) of this section, whichever is
later. Each registration year begins on July 1 and ends on June 30 of
the following year.
(b) No person required to file a registration statement may
transport a hazardous material or cause a hazardous material to be
transported or shipped, unless such person has on file, in accordance
with Sec. 107.620, a current Certificate of Registration in accordance
with the requirements of this subpart.
(c) A registrant whose name or principal place of business has
changed during the year of registration must notify PHMSA of that change
by submitting an amended registration statement not later than 30 days
after the change.
(d) Copies of DOT Form F 5800.2 and instructions for its completion
may be obtained from the Hazardous Materials Registration Program, PHH-
60, U.S. Department of Transportation, Washington, DC 20590-0001, by
calling 617-494-2545 or 202-366-4109, or via the Internet at http://
hazmat.dot.gov.
(e) If the registrant is not a resident of the United States, the
registrant must attach to the registration statement the name and
address of a permanent resident of the United States, designated in
accordance with Sec. 105.40, to serve as agent for service of process.
[Amdt. No. 107-26, 57 FR 30630, July 9, 1992, as amended by Amdt. 107-
31, 59 FR 32932, June 27, 1994; 65 FR 7309, Feb. 14, 2000; 67 FR 61011,
Sept. 27, 2002; 70 FR 56090, Sept. 23, 2005]
Sec. 107.612 Amount of fee.
(a) Registration year 1999-2000 and earlier. For all registration
years through 1999-2000, each person subject to the requirements of
Sec. 107.601(a)(1)-(5) of this subpart must pay an annual fee of $300
(which includes a $50 processing fee).
(b) Registration years 2000-2001, 2001-2002 and 2002-2003. For the
registration years 2000-2001, 2001-2002, and 2002-2003, each person
subject to the requirements of this subpart must pay an annual fee as
follows:
(1) Small business. Each person that qualifies as a small business
under criteria specified in 13 CFR part 121 applicable to the North
American Industry Classification System (NAICS) code that describes that
person's primary
[[Page 56]]
commercial activity must pay an annual fee of $275 and the processing
fee required by paragraph (b)(3) of this section.
(2) Other than a small business. Each person that does not meet
criteria specified in paragraph (b)(1) of this section must pay an
annual fee of $1,975 and the processing fee required by paragraph (b)(3)
of this section.
(3) Processing fee. The processing fee is $25 for each registration
statement filed. A single statement may be filed for one, two, or three
registration years as provided in Sec. 107.616(c).
(c) Registration years 2003-2004, 2004-2005 and 2005-2006. For
registration years 2003-2004, 2004-2005, and 2005-2006, each person
subject to the requirements of this subpart must pay an annual
registration fee as follows:
(1) Small business. Each person that qualifies as a small business,
under criteria specified in 13 CFR part 121 applicable to the North
American Industry Classification System (NAICS) code that describes that
person's primary commercial activity, must pay an annual registration
fee of $125 and the processing fee required by paragraph (c)(4) of this
section.
(2) Not-for-profit organization. Each not-for-profit organization
must pay an annual registration fee of $125 and the processing fee
required by paragraph (c)(4) of this section. A not-for-profit
organization is an organization exempt from taxation under 26 U.S.C.
501(a).
(3) Other than a small business or not-for-profit organization. Each
person that does not meet the criteria specified in paragraph (c)(1) or
(c)(2) of this section must pay an annual registration fee of $275 and
the processing fee required by paragraph (c)(4) of this section.
(4) Processing fee. The processing fee is $25 for each registration
statement filed. A single statement may be filed for one, two, or three
registration years as provided in Sec. 107.616(c).
(d) Registration years 2006-2007 and following. For each
registration year beginning with 2006-2007, each person subject to the
requirements of this subpart must pay an annual fee as follows:
(1) Small business. Each person that qualifies as a small business,
under criteria specified in 13 CFR part 121 applicable to the North
American Industry Classification System (NAICS) code that describes that
person's primary commercial activity, must pay an annual registration
fee of $250 and the processing fee required by paragraph (d)(4) of this
section.
(2) Not-for-profit organization. Each not-for-profit organization
must pay an annual registration fee of $250 and the processing fee
required by paragraph (d)(4) of this section. A not-for-profit
organization is an organization exempt from taxation under 26 U.S.C.
501(a).
(3) Other than a small business or not-for-profit organization. Each
person that does not meet the criteria specified in paragraph (d)(1) or
(d)(2) of this section must pay an annual registration fee of $975 and
the processing fee required by paragraph (d)(4) of this section.
(4) Processing fee. The processing fee is $25 for each registration
statement filed. A single statement may be filed for one, two, or three
registration years as provided in Sec. 107.616(c).
[65 FR 7309, Feb. 14, 2000, as amended at 67 FR 58345, Sept. 16, 2002;
68 FR 1345, Jan. 9, 2003]
Sec. 107.616 Payment procedures.
(a) Except as provided in paragraph (d) of this section, each person
subject to the requirements of this subpart must mail the registration
statement and payment in full to the U.S. Department of Transportation,
Hazardous Materials Registration, P.O. Box 740188, Atlanta, Georgia
30374-0188, or submit the statement and payment electronically through
the Department's e-Commerce Internet site. Access to this service is
provided at http://hazmat.dot.gov/register.htm. A registrant required to
file an amended registration statement under Sec. 107.608(c) must mail
it to the same address or submit it through the same Internet site.
(b) Payment must be made by certified check, cashier's check,
personal check, or money order in U.S. funds and drawn on a U.S. bank,
payable to the U.S. Department of Transportation and identified as
payment for the ``Hazmat Registration Fee,'' or by completing an
authorization for payment by credit card or other electronic means of
payment acceptable to the
[[Page 57]]
Department on the registration statement or as part of an Internet
registration as provided in paragraph (a) of this section.
(c) Payment must correspond to the total fees properly calculated in
the ``Amount Due'' block of the DOT form F 5800.2. A person may elect to
register and pay the required fees for up to three registration years by
filing one complete and accurate registration statement.
(d) A person may obtain a temporary registration number, valid for
45 days from the date of issuance, through an expedited registration
process as follows:
(1) Contact PHMSA by telephone (800-942-6990 or 617-494-2545) and
provide name, principal place of business, and credit card payment
information;
(2) Pay a registration and processing fee as follows:
(i) For registration year 2002-2003, pay a registration fee of $275,
a processing fee of $25, and an expedited handling fee of $50. The total
fee is $350. Persons who do not meet the criteria for a small business,
as specified in Sec. 107.612(b)(1), must enclose an additional
registration fee payment of $1,700 with the expedited follow-up
material, for a total of $2,050 (registration fee--$1,975; processing
fee--$25; expedited handling fee--$50);
(ii) For registration years 2003-2004, 2004-2005, and 2005-2006, pay
a registration fee of $125, a processing fee of $25, and an expedited
handling fee of $50. The total fee is $200. Persons who do not meet the
criteria for a small business or are not a not-for-profit organization,
as specified in Sec. 107.612(c), must enclose an additional
registration fee payment of $150 with the expedited follow-up material,
for a total of $350 (registration fee--$275; processing fee--$25;
expedited handling fee--$50); and
(iii) For registration years beginning with 2006-2007, pay a
registration fee of $250, a processing fee of $25, and an expedited
handling fee of $50. The total fee is $325. Persons who do not meet the
criteria for a small business or are not a not-for-profit organization,
as specified in Sec. 107.612(d), must enclose an additional
registration fee payment of $725 with the expedited follow-up material,
for a total of $1,050 (registration fee--$975; processing fee--$25;
expedited handling fee--$50); and
(3) Submit a completed registration statement and proof of payment
to PHMSA before the expiration date of the temporary registration
number.
[Amdt. 107-26, 57 FR 30630, July 9, 1992, as amended by Amdt. 107-26, 58
FR 12545, Mar. 5, 1993; 65 FR 7310, Feb. 14, 2000; 67 FR 58345, Sept.
16, 2002; 68 FR 1346, Jan. 9, 2003]
Sec. 107.620 Recordkeeping requirements.
(a) Each person subject to the requirements of this subpart, or its
agent designated under Sec. 107.608(e), must maintain at its principal
place of business for a period of three years from the date of issuance
of each Certificate of Registration:
(1) A copy of the registration statement filed with PHMSA; and
(2) The Certificate of Registration issued to the registrant by
PHMSA.
(b) After January 1, 1993, each motor carrier subject to the
requirements of this subpart must carry a copy of its current
Certificate of Registration issued by PHMSA or another document bearing
the registration number identified as the ``U.S. DOT Hazmat Reg. No.''
on board each truck and truck tractor (not including trailers and semi-
trailers) used to transport hazardous materials subject to the
requirements of this subpart. The Certificate of Registration or
document bearing the registration number must be made available, upon
request, to enforcement personnel.
(c) In addition to the requirements of paragraph (a) of this
section, after January 1, 1995, each person who transports by vessel a
hazardous material subject to the requirements of this subpart must
carry on board the vessel a copy of its current Certificate of
Registration or another document bearing the current registration number
identified as the ``U.S. DOT Hazmat Reg. No.''
(d) Each person subject to this subpart must furnish its Certificate
of Registration (or a copy thereof) and all other records and
information pertaining to the information contained in
[[Page 58]]
the registration statement to an authorized representative or special
agent of DOT upon request.
[Amdt. No. 107-26, 57 FR 30630, July 9, 1992, as amended at 57 FR 37902,
August 21, 1992; Amdt. 107-26, 58 FR 12545, Mar. 5, 1993; Amdt. 107-31,
59 FR 32932, June 27, 1994]
Subpart H_Approvals, Registrations and Submissions
Source: Amdt. 107-38, 61 FR 21100, May 9, 1996, unless otherwise
noted.
Sec. 107.701 Purpose and scope.
(a) This subpart prescribes procedures for the issuance,
modification and termination of approvals, and the submission of
registrations and reports, as required by this chapter.
(b) The procedures of this subpart are in addition to any
requirements in subchapter C of this chapter applicable to a specific
approval, registration or report. If compliance with both a specific
requirement of subchapter C of this chapter and a procedure of this
subpart is not possible, the specific requirement applies.
(c) Registration under subpart F or G of this part is not subject to
the procedures of this subpart.
[Amdt. 107-38, 61 FR 21100, May 9, 1996; Amdt. 107-38, 61 FR 27948, June
3, 1996]
Sec. 107.705 Registrations, reports, and applications for approval.
(a) A person filing a registration, report, or application for an
approval, or a renewal or modification of an approval subject to the
provisions of this subpart must--
(1) File the registration, report, or application with the Associate
Administrator for Hazardous Materials Safety (Attention: Approvals, PHH-
32), Pipeline and Hazardous Materials Safety Administration, U.S.
Department of Transportation, 400 7th Street, SW., Washington, DC 20590-
0001. Alternatively, the document with any attached supporting
documentation in an appropriate format may be filed by facsimile (fax)
to: (202) 366-3753 or (202) 366-3308 or by electronic mail (e-mail) to:
[email protected].
(2) Identify the section of the chapter under which the
registration, report, or application is made;
(3) If a report is required by an approval, a registration or an
exemption, identify the approval, registration or exemption number;
(4) Provide the name, street and mailing addresses, e-mail address
optional, and telephone number of the person on whose behalf the
registration, report, or application is made and, if different, the
person making the filing;
(5) If the person on whose behalf the filing is made is not a
resident of the United States, provide a designation of agent for
service in accordance with Sec. 105.40;
(6) Provide a description of the activity for which the registration
or report is required; and
(7) Provide additional information as requested by the Associate
Administrator, if the Associate Administrator determines that a filing
lacks pertinent information or otherwise does not comply with applicable
requirements.
(b) In addition to the provisions in paragraph (a) for an approval,
an application for an approval, or an application for modification or
renewal of an approval, the applicant must provide--
(1) A description of the activity for which the approval is
required;
(2) The proposed duration of the approval;
(3) The transport mode or modes affected, as applicable;
(4) Any additional information specified in the section containing
the approval; and
(5) For an approval which provides exceptions from regulatory
requirements or prohibitions--
(i) Identification of any increased risk to safety or property that
may result if the approval is granted, and specification of the measures
that the applicant considers necessary or appropriate to address that
risk; and
(ii) Substantiation, with applicable analyses or evaluations, if
appropriate, demonstrating that the proposed activity will achieve a
level of safety that is at least equal to that required by the
regulation.
(c) For an approval with an expiration date, each application for
renewal
[[Page 59]]
or modification must be filed in the same manner as an original
application. If a complete and conforming renewal application is filed
at least 60 days before the expiration date of an approval, the
Associate Administrator, on written request from the applicant, will
issue a written extension to permit operation under the terms of the
expired approval until a final decision on the application for renewal
has been made. Operation under an expired approval is prohibited absent
a written extension. This paragraph does not limit the authority of the
Associate Administrator to modify, suspend or terminate an approval
under Sec. 107.713.
(d) To request confidential treatment for information contained in
the application, the applicant shall comply with Sec. 105.30(a).
[Amdt. 107-38, 61 FR 21100, May 9, 1996, as amended at 65 FR 50457, Aug.
18, 2000; 67 FR 61011, Sept. 27, 2002; 70 FR 56090, Sept. 23, 2005]
Sec. 107.709 Processing of an application for approval, including an
application for renewal or modification.
(a) No public hearing or other formal proceeding is required under
this subpart before the disposition of an application.
(b) At any time during the processing of an application, the
Associate Administrator may request additional information from the
applicant. If the applicant does not respond to a written request for
additional information within 30 days of the date the request was
received, the application may be deemed incomplete and denied. However,
if the applicant responds in writing within the 30-day period requesting
an additional 30 days within which it will gather the requested
information, the Associate Administrator may grant the 30-day extension.
(c) The Associate Administrator may grant or deny an application, in
whole or in part. At the Associate Administrator's discretion, an
application may be granted subject to provisions that are appropriate to
protect health, safety and property. The Associate Administrator may
impose additional provisions not specified in the application, or delete
conditions in the application which are unnecessary.
(d) The Associate Administrator may grant an application on finding
that--
(1) The application complies with this subpart;
(2) The application demonstrates that the proposed activity will
achieve a level of safety that--
(i) Is at least equal to that required by the regulation, or
(ii) If the regulations do not establish a level of safety, is
consistent with the public interest and adequately will protect against
the risks to life and property inherent in the transportation of
hazardous materials in commerce;
(3) The application states all material facts, and contains no
materially false or materially misleading statement;
(4) The applicant meets the qualifications required by applicable
regulations; and
(5) The applicant is fit to conduct the activity authorized by the
approval, or renewal or modification of approval. This assessment may be
based on information in the application, prior compliance history of the
applicant, and other information available to the Associate
Administrator.
(e) Unless otherwise specified in this chapter or by the Associate
Administrator, an approval in which a term is not specified does not
expire.
(f) The Associate Administrator notifies the applicant in writing of
the decision on the application. A denial contains a brief statement of
reasons.
Sec. 107.711 Withdrawal.
An application may be withdrawn at any time before a decision to
grant or deny it is made. Withdrawal of an application does not
authorize the removal of any related records from the PHMSA dockets or
files. Applications that are eligible for confidential treatment under
Sec. 105.30 will remain confidential after the application is
withdrawn. The duration of this confidential treatment for trade secrets
and commercial or financial information is indefinite, unless the party
requesting the confidential treatment of the materials notifies the
Associate Administrator that the confidential treatment is no longer
required.
[Amdt. 107-38, 61 FR 21100, May 9, 1996, as amended at 67 FR 61011,
Sept. 27, 2002]
[[Page 60]]
Sec. 107.713 Approval modification, suspension or termination.
(a) The Associate Administrator may modify an approval on finding
that--
(1) Modification is necessary to conform an existing approval to
relevant statutes and regulations as they may be amended from time to
time; or
(2) Modification is required by changed circumstances to enable the
approval to continue to meet the standards of Sec. 107.709(d).
(b) The Associate Administrator may modify, suspend or terminate an
approval, as appropriate, on finding that--
(1) Because of a change in circumstances, the approval no longer is
needed or no longer would be granted if applied for;
(2) The application contained inaccurate or incomplete information,
and the approval would not have been granted had the application been
accurate and complete;
(3) The application contained deliberately inaccurate or incomplete
information; or
(4) The holder knowingly has violated the terms of the approval or
an applicable requirement of this chapter in a manner demonstrating lack
of fitness to conduct the activity for which the approval is required.
(c) Except as provided in paragraph (d) of this section, before an
approval is modified, suspended or terminated, the Associate
Administrator notifies the holder in writing of the proposed action and
the reasons for it, and provides an opportunity to show cause why the
proposed action should not be taken.
(1) The holder may file a written response with the Associate
Administrator within 30 days of receipt of notice of the proposed
action.
(2) After considering the holder's or party's written response, or
after 30 days have passed without response since receipt of the notice,
the Associate Administrator notifies the holder in writing of the final
decision with a brief statement of reasons.
(d) The Associate Administrator, if necessary to avoid a risk of
significant harm to persons or property, may in the notification declare
the proposed action immediately effective.
Sec. 107.715 Reconsideration.
(a) An applicant or a holder may request that the Associate
Administrator reconsider a decision under Sec. 107.709(f) or Sec.
107.713(c). The request must:
(1) Be in writing and filed within 20 days of receipt of the
decision;
(2) State in detail any alleged errors of fact and law;
(3) Enclose any additional information needed to support the request
to reconsider; and
(4) State in detail the modification of the final decision sought.
(b) The Associate Administrator considers newly submitted
information on a showing that the information could not reasonably have
been submitted during application processing.
(c) The Associate Administrator grants or denies, in whole or in
part, the relief requested and informs the requesting person in writing
of the decision.
Sec. 107.717 Appeal.
(a) A person who requested reconsideration under Sec. 107.715 may
appeal to the Administrator the Associate Administrator's decision on
the request. The appeal must:
(1) Be in writing and filed within 30 days of receipt of the
Associate Administrator's decision on reconsideration;
(2) State in detail any alleged errors of fact and law;
(3) Enclose any additional information needed to support the appeal;
and
(4) State in detail the modification of the final decision sought.
(b) The Administrator, if necessary to avoid a risk of significant
harm to persons or property, may declare the Associate Administrator's
action effective pending a decision on appeal.
(c) The Administrator grants or denies, in whole or in part, the
relief requested and informs the appellant in writing of the decision on
appeal. The Administrator's decision on appeal is the final
administrative action.
[[Page 61]]
Subpart I_Approval of Independent Inspection Agencies, Cylinder
Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT
Specification Cylinders
Source: 67 FR 51639, Aug. 8, 2002, unless otherwise noted.
Sec. 107.801 Purpose and scope.
(a) This subpart prescribes procedures for--
(1) A person who seeks approval to be an independent inspection
agency to perform cylinder inspections and verifications required by
parts 178 and 180 of this chapter;
(2) A person who seeks approval to engage in the requalification
(e.g., inspection, testing, or certification), rebuilding, or repair of
a cylinder manufactured in accordance with a DOT specification under
subchapter C of this chapter or under the terms of an exemption issued
under this part;
(3) A person who seeks approval to perform the manufacturing
chemical analyses and tests of DOT specification or exemption cylinders
outside the United States.
(b) No person may engage in a function identified in paragraph (a)
of this section unless approved by the Associate Administrator in
accordance with the provisions of this subpart. Each person must comply
with the applicable requirements in this subpart. In addition, the
procedural requirements in subpart H of this part apply to the filing,
processing, and termination of an approval issued under this subpart.
Sec. 107.803 Approval of independent inspection agency.
(a) General. Prior to performing cylinder inspections and
verifications required by parts 178 and 180 of this chapter, a person
must apply to the Associate Administrator for an approval as an
independent inspection agency. A person approved as an independent
inspection agency is not an PHMSA agent or representative.
(b) Criteria. No applicant for approval as an independent inspection
agency may be engaged in the manufacture of cylinders for use in the
transportation of hazardous materials, or be directly or indirectly
controlled by, or have a financial involvement with, any entity that
manufactures cylinders for use in the transportation of hazardous
materials, except for providing services as an independent inspector.
(c) Application information. Each applicant must submit an
application in conformance with Sec. 107.705 containing the information
prescribed in Sec. 107.705(a). In addition, the application must
contain the following information:
(1) Name and address of each facility where tests and inspections
are to be performed.
(2) Detailed description of the inspection and testing facilities to
be used by the applicant.
(3) Detailed description of the applicant's qualifications and
ability to perform the inspections and to verify the inspections
required by part 178 of this chapter or under the terms of an exemption
issued under this part.
(4) Name, address, and principal business activity of each person
having any direct or indirect ownership interest in the applicant
greater than three percent and any direct or indirect ownership interest
in each subsidiary or division of the applicant.
(5) Name of each individual whom the applicant proposes to employ as
an inspector and who will be responsible for certifying inspection and
test results, and a statement of that person's qualifications.
(6) An identification or qualification number assigned to each
inspector who is supervised by a certifying inspector identified in
paragraph (c)(3) of this section.
(7) A statement that the applicant will perform its functions
independent of the manufacturers and owners of the cylinders.
(8) The signature of the person certifying the approval application
and the date on which it was signed.
(d) Facility inspection. Upon the request of the Associate
Administrator, the applicant must allow the Associate Administrator or
the Associate Administrator's designee to inspect the applicant's
facilities and records. The person seeking approval must bear the cost
of the inspection.
[[Page 62]]
(e) After approval, the Associate Administrator may authorize, upon
request, the independent inspection agency to perform other inspections
and functions for which the Associate Administrator finds the applicant
to be qualified. Such additional authorizations will be noted on each
inspection agency's approval documents.
[67 FR 51639, Aug. 8, 2002, as amended at 68 FR 24659, May 8, 2003]
Sec. 107.805 Approval of cylinder requalifiers.
(a) General. A person must meet the requirements of this section to
be approved to inspect, test, certify, repair, or rebuild a cylinder in
accordance with a DOT specification under subpart C of part 178 or
subpart C of part 180 of this chapter or under the terms of an exemption
issued under this part.
(b) Independent Inspection Agency Review. Each applicant must
arrange for an independent inspection agency, approved by the Associate
Administrator pursuant to this subpart, to perform a review of its
inspection or requalification operation. The person seeking approval
must bear the cost of the inspection. A list of approved independent
inspection agencies is available from the Associate Administrator at the
address listed in Sec. 107.705. Assistance in obtaining an approval is
available from the same address.
(c) Application for approval. If the inspection performed by an
independent inspection agency is completed with satisfactory results,
the applicant must submit a letter of recommendation from the
independent inspection agency, an inspection report, and an application
containing the information prescribed in Sec. 107.705(a). In addition,
the application must contain--
(1) The name of the facility manager;
(2) The DOT specification/exemption cylinders that will be
inspected, tested, repaired, or rebuilt at the facility;
(3) A certification that the facility will operate in compliance
with the applicable requirements of subchapter C of this chapter; and
(4) The signature of the person making the certification and the
date on which it was signed.
(d) Issuance of requalifier identification number (RIN). The
Associate Administrator issues a RIN as evidence of approval to
requalify DOT specification/exemption cylinders if it is determined,
based on the applicant's submission and other available information,
that the applicant's qualifications and, when applicable, facility are
adequate to perform the requested functions in accordance with the
criteria prescribed in subpart C of Part 180 of this chapter.
(e) Expiration of RIN. Unless otherwise provided in the issuance
letter, an approval expires five years from the date of issuance,
provided the applicant's facility and qualifications are maintained at
or above the level observed at the time of inspection by the independent
inspection agency, or at the date of the certification in the
application for approval for requalifiers only performing inspections
made under Sec. 180.209(g) of this chapter.
(f) Exceptions. Notwithstanding the requirements in paragraphs (b)
and (c) of this section, a person who only performs inspections in
accordance with Sec. 180.209(g) of this chapter may submit an
application that, in addition to the information prescribed in Sec.
107.705(a), identifies the DOT specification/exemption cylinders to be
inspected; certifies the requalifier will operate in compliance with the
applicable requirements of subchapter C of this chapter; certifies the
persons performing inspections have been trained and have the
information contained in each applicable CGA pamphlet incorporated by
reference in Sec. 171.7 of this chapter applicable to the requalifiers'
activities; and includes the signature of the person making the
certification and the date on which it was signed. Each person must
comply with the applicable requirements in this subpart. In addition,
the procedural requirements in subpart H of this part apply to the
filing, processing and termination of an approval issued under this
subpart. After May 31, 2004, no person may requalify a DOT
specification/exemption cylinder in accordance with Sec. 180.209(g) of
this chapter unless that person has been issued a RIN as provided in
paragraph (d) of this section.
(g) Each holder of a current RIN shall report in writing any change
in its name, address, ownership, testing
[[Page 63]]
equipment, or management or personnel performing any function under this
section, to the Associate Administrator (PHH-32) within 20 days of the
change.
[67 FR 51639, Aug. 8, 2002, as amended at 68 FR 24659, May 8, 2003; 68
FR 55544, Sept. 26, 2003; 70 FR 56090, Sept. 23, 2005]
Sec. 107.807 Approval of non-domestic chemical analyses and tests.
(a) General. A person who seeks to manufacture DOT specification or
exemption cylinders outside the United States must seek an approval from
the Associate Administrator to perform the chemical analyses and tests
of those cylinders outside the United States.
(b) Application for approval. Each applicant must submit an
application containing the information prescribed in Sec. 107.705(a).
In addition, the application must contain--
(1) The name, address, and a description of each facility at which
cylinders are to be manufactured and chemical analyses and tests are to
be performed;
(2) Complete details concerning the dimensions, materials of
construction, wall thickness, water capacity, shape, type of joints,
location and size of openings and other pertinent physical
characteristics of each specification or exemption cylinder for which
approval is being requested, including calculations for cylinder wall
stress and wall thickness, which may be shown on a drawing or on
separate sheets attached to a descriptive drawing;
(3) The name of the independent inspection agency to be used; and
(4) The signature of the person making the certification and the
date on which it was signed.
(c) Facility inspections. Upon the request of the Associate
Administrator, the applicant must allow the Associate Administrator or
the Associate Administrator's designee to inspect the applicant's
cylinder manufacturing and testing facilities and records, and must
provide such materials and cylinders for analyses and tests as the
Associate Administrator may specify. The applicant or holder must bear
the cost of the initial and subsequent inspections, analyses, and tests.
PART 110_HAZARDOUS MATERIALS PUBLIC SECTOR TRAINING AND PLANNING GRANTS
--Table of Contents
Sec.
110.1 Purpose.
110.5 Scope.
110.7 Control Number under the Paperwork Reduction Act.
110.10 Eligibility.
110.20 Definitions.
110.30 Grant application.
110.40 Activities eligible for funding.
110.50 Disbursement of Federal funds.
110.60 Cost sharing for planning and training.
110.70 Financial administration.
110.80 Procurement.
110.90 Grant monitoring, reports, and records retention.
110.100 Enforcement.
110.110 After-grant requirements.
110.120 Deviation from this part.
110.130 Disputes.
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Source: Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, unless otherwise
noted.
Editorial Note: Nomenclature changes to part 110 appear at 70 FR
56090, Sept. 23, 2005.
Sec. 110.1 Purpose.
This part sets forth procedures for reimbursable grants for public
sector planning and training in support of the emergency planning and
training efforts of States, Indian tribes, and local communities to deal
with hazardous materials emergencies, particularly those involving
transportation. These grants will enhance the implementation of the
Emergency Planning and Community Right-to-Know Act of 1986 (42 U.S.C.
11001).
Sec. 110.5 Scope.
(a) This part applies to States and Indian tribes and contains the
program requirements for public sector training and planning grants to
support hazardous materials emergency planning and training efforts.
(b) The requirements contained in 49 CFR part 18, ``Uniform
Administrative Requirements for Grants and Cooperative Agreements to
State and Local Governments'', apply to grants issued under this part.
(c) Copies of standard forms and OMB circulars referenced in this
part are available from the HMTUSA Grants
[[Page 64]]
Manager, Pipeline and Hazardous Materials Safety Administration, U.S.
Department of Transportation, 400 Seventh Street, SW., Washington DC
20590-0001.
Sec. 110.7 Control Number under the Paperwork Reduction Act.
The Office of Management and Budget control number assigned to
collection of information in Sec. Sec. 110.30, 110.70, 110.80, and
110.90 is 2137-0586.
Sec. 110.10 Eligibility.
This part applies to States and Indian tribes. States may apply for
planning and training grants. Federally-recognized Indian tribes may
apply for training grants.
Sec. 110.20 Definitions.
Unless defined in this part, all terms defined in 49 U.S.C. 5102 are
used in their statutory meaning and all terms defined in 49 CFR part 18
and OMB Circular A-102, with respect to administrative requirements for
grants, are used as defined therein. Other terms used in this part are
defined as follows:
Allowable costs means those costs that are: eligible, reasonable,
necessary, and allocable to the project permitted by the appropriate
Federal cost principles, and approved in the grant.
Associate Administrator means the Associate Administrator for
Hazardous Materials Safety, Pipeline and Hazardous Materials Safety
Administration.
Budget period means the period of time specified in the grant
agreement during which the project manager may expend or obligate
project funds.
Cost review means the review and evaluation of costs to determine
reasonableness, allocability, and allowability.
Indian country means Indian country as defined in 18 U.S.C. 1151.
That section defines Indian country as all land within the limits of any
reservation under the jurisdiction of the U.S. Government,
notwithstanding the issuance of any patent, and, including rights-of-way
running through the reservation; all dependent Indian communities within
the borders of the United States whether within the original or
subsequently acquired territory thereof, and whether within or without
the limits of a State; and all Indian allotments, the Indian titles to
which have not been extinguished, including rights-of-way running
through the same.
Indian tribe means a tribe ``Federally-recognized'' by the Secretary
of the Interior under 25 CFR 272.2.
Local Emergency Planning Committee (LEPC) means a committee
appointed by the State Emergency Response Commission under section
301(c) of the Emergency Planning and Community Right-to-Know Act of 1986
(42 U.S.C. 11001(c)) that includes at a minimum, representatives from
each of the following groups or organizations: elected State and local
officials; law enforcement, firefighting, civil defense, first aid,
health, local environmental, hospital, and transportation personnel;
broadcast and print media; community groups; and owners and operators of
facilities subject to the emergency planning requirements.
National curriculum means the curriculum required to be developed
under 49 U.S.C. 5115 and necessary to train public sector emergency
response and preparedness teams, enabling them to comply with
performance standards as stated in 49 U.S.C. 5115(c).
Political subdivision means a county, municipality, city, town,
township, local public authority (including any public and Indian
housing agency under the United States Housing Act of 1937 (42 U.S.C.
1401 et seq.), school district, special district, intrastate district,
council of governments (whether or not incorporated as a nonprofit
corporation under State law), any other regional or interstate
government entity, or any agency or instrumentality of a local
government.
Project means the activities and tasks identified in the grant
agreement.
Project manager means the State or Indian tribal official designated
in a grant as the recipient agency's principal program contact with the
Federal Government.
Project officer means the Federal official designated in a grant as
the program contact with the project manager. The project officer is
responsible for monitoring the project.
[[Page 65]]
Project period means the length of time specified in a grant for
completion of all work associated with that project.
State Emergency Response Commission (SERC) means the State Emergency
Response Commission appointed by the Governor of each State and
Territory under the Emergency Planning and Community Right-to-Know Act
of 1986.
Statement of Work means that portion of a grant that describes the
purpose and scope of activities and tasks to be carried out as part of
the proposed project.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59
FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001]
Sec. 110.30 Grant application.
(a) General. An applicant for a planning or training grant shall use
only the standard application forms approved by the Office of Management
and Budget (OMB) (SF-424 and SF-424A) under the Paperwork Reduction Act
of 1980 (44 U.S.C. 3502). Applicants are required to submit an original
and two copies of the application package to: Grants Manager, Pipeline
and Hazardous Materials Safety Administration, U.S. Department of
Transportation, 400 7th Street, SW., Washington, DC 20590-0001.
Applications received on or before January 1st and July 1st of each year
will be considered in that cycle of the semi-annual review and award
process. An initial round of the review and award process will consider
applications received on or before November 15, 1992. Requests and
continuation applications must include an original and two copies of the
affected pages; previously submitted pages with information that is
still current do not have to be resubmitted. The application must
include the following:
(1) Application for Federal Assistance for non-construction programs
(SF-424) and Budget sheets (SF-424A). A single application may be used
for both planning and training if the budgets for each are entered
separately on all budget sheets.
(2) For States, a letter from the Governor designating the State
agency that is authorized to apply for a grant and to provide the
written certifications required to receive a grant.
(3) For Indian tribes, a letter from the tribal government,
governing body, or tribal council to the effect that the applicant is
authorized to apply for a grant and to provide the written
certifications required to receive a grant.
(4) A written statement explaining whether the State or tribe
assesses and collects fees on the transportation of hazardous materials
and whether such assessments or fees are used solely to carry out
purposes related to the transportation of hazardous materials.
(5) A statement designating a project manager and providing the
name, position, address and phone number of that individual who will be
responsible for coordinating the funded activities with other agencies/
organizations.
(6) A project narrative statement of the goals and objectives of the
proposed project, project design, and long range plans. The proposed
grant project and budget periods may be one or more years.
(7) A statement of work in support of the proposed project that
describes and sets priorities for the activities and tasks to be
conducted, the costs associated with each activity, the number and types
of deliverables and products to be completed, and a schedule for
implementation.
(8) A description of the major items of costs needed to implement
the statement of work and a copy of any cost or price analysis if
conducted.
(9) Drug-Free Workplace Certification. The applicant must certify as
specified in appendix C of 49 CFR part 29 that it will comply with the
Drug-Free Workplace Act of 1988 (Pub. L. 100-690, title V, subtitle D;
51 U.S.C. 701 et seq.).
(10) Anti-Lobbying Certification. The applicant must certify as
specified in appendix A of 49 CFR part 20 that no Federal funds will be
expended to pay any person for influencing or attempting to influence an
officer or employee of any agency, a Member of Congress, an officer or
employee of Congress, or an employee of a Member of Congress (section
319 of Pub. L. 101-121, 31 U.S.C. 1352).
(11) Debarment and Suspension Certification. The applicant must
certify as specified in subpart G of 49 CFR part 29 that it will not
make an award or permit any award to any party which is
[[Page 66]]
debarred or suspended or is otherwise excluded from or ineligible for
participation in Federal assistance programs.
(b) Planning. In addition to the requirements specified in paragraph
(a) of this section, eligible State applicants must include the
following in their application package:
(1) A written certification that the State is complying with
sections 301 and 303 of the Emergency Planning and Community Right-to-
Know Act of 1986, including a brief explanation of how compliance has
been achieved.
(2) A written statement specifying the aggregate expenditure of
funds of the State, exclusive of Federal funds, for each of its last two
fiscal years for developing, improving, and implementing emergency plans
under the Emergency Planning and Community Right-to-Know Act of 1986,
including an explanation specifying the sources of these funds. A
written certification that the State's aggregate expenditures, as
defined by the State, of funds for this purpose, exclusive of Federal
funds, will not fall below the average level of its expenditures for its
last two fiscal years. The applicant may not claim any of these
expenditures for cost-sharing.
(3) A written statement agreeing to make at least 75 percent of the
Federal funds awarded available to LEPCs and an explanation of how the
applicant intends to make such funds available to them for developing,
improving, or implementing emergency plans.
(4) Designation of a project manager to serve as contact for
coordinating planning funds under this program.
(5) A project narrative statement of the goals and objectives of
each proposed project, including the following:
(i) A background statement describing the applicant's long-term
goals and objectives with respect to:
(A) The current abilities and authorities of the applicant's program
for preparedness planning;
(B) The need to sustain or increase program capability;
(C) Current degree of participation in or intention to assess the
need for a regional hazardous materials emergency response team; and
(D) The impact that the grant will have on the program.
(ii) A discussion of whether the applicant's program currently
knows, or intends to assess, transportation flow patterns of hazardous
materials within the State and between that State and another State.
(iii) A schedule for implementing the proposed grant activities.
(iv) A statement describing the ways in which planning will be
monitored by the project manager.
(v) A statement indicating that all members of the State Emergency
Response Commission were provided the opportunity to review the grant
application.
(c) Training. In addition to the requirements specified in paragraph
(a) of this section, eligible State and Indian tribe applicants must
include the following in their application package:
(1) For a State applicant, a written certification explaining how
the State is complying with sections 301 and 303 of the Emergency
Planning and Community Right-to-Know Act.
(2) A written statement specifying the aggregate expenditure of
funds of the State or Indian tribe, exclusive of Federal funds, for each
of its last two fiscal years for training public sector employees to
respond to accidents and incidents involving hazardous materials,
including an explanation specifying the sources of these funds. A
written certification that the applicant's aggregate expenditure, as
defined by the State or tribe, of funds for this purpose, exclusive of
Federal funds, will not fall below the average level of its expenditures
for its last two fiscal years. The applicant may not claim any of these
expenditures for cost-sharing purposes.
(3) For a State applicant, a written statement agreeing to make at
least 75 percent of the Federal funds awarded available for the purpose
of training public sector employees employed or used by political
subdivisions. A State applicant may elect to pass all or some portion of
the grant on to political subdivisions for this purpose. The applicant
must include a specific explanation of how it intends to meet this
requirement.
(4) Designation of a primary point of contact for coordinating
training funded under this program. Identification
[[Page 67]]
of a single repository for copies of course materials delivered under
the grant as specified in Sec. 110.90 of this part.
(5) A project narrative statement of the long-range goals and
objectives of each proposed project, including the following:
(i) A background statement describing:
(A) The current hazardous materials training program(s);
(B) Training audience, including numbers and levels of training and
accreditation program for each level or criterion required to advance to
the next level;
(C) Estimated total number of persons to be trained under the
proposed project;
(D) The ways in which training grants will support the integrated
delivery of training to meet the needs of individualized geographic and
resource needs and time considerations of local responders. When
appropriate, a statement describing how the proposed project will
accommodate the different training needs for rural versus urban
environments; and
(E) The impact that the grant and the National Curriculum will have
on the program.
(ii) A statement describing how the National Curriculum will be used
or modified to train public sector employees at the local level to
respond to accidents and incidents involving hazardous materials.
(iii) A statement describing the ways in which effectiveness of
training will be monitored by the project manager, including, but not
limited to, examinations, critiques, and instructor evaluations.
(iv) A schedule for implementing the proposed training grant
activities.
(v) A statement indicating that all members of the State or Tribal
Emergency Response Commission were provided the opportunity to review
the grant application.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59
FR 49132, Sept. 26, 1994]
Sec. 110.40 Activities eligible for funding.
(a) Planning. Eligible State applicants may receive funding for the
following activities:
(1) Development, improvement, and implementation of emergency plans
required under the Emergency Planning and Community Right-to-Know Act of
1986, as well as exercises which test the emergency plan. Enhancement of
emergency plans to include hazard analysis as well as response
procedures for emergencies involving transportation of hazardous
materials, including radioactive materials.
(2) An assessment to determine flow patterns of hazardous materials
within a State, between a State and another State or Indian country, and
development and maintenance of a system to keep such information
current.
(3) An assessment of the need for regional hazardous materials
emergency response teams.
(4) An assessment of local response capabilities.
(5) Conduct of emergency response drills and exercises associated
with emergency preparedness plans.
(6) Provision of technical staff to support the planning effort.
(7) Additional activities the Associate Administrator deems
appropriate to implement the scope of work for the proposed project plan
and approved in the grant.
(b) Training. Eligible State and Indian tribe applicants may receive
funding for the following activities:
(1) An assessment to determine the number of public sector employees
employed or used by a political subdivision who need the proposed
training and to select courses consistent with the National Curriculum.
(2) Delivery of comprehensive preparedness and response training to
public sector employees. Design and delivery of preparedness and
response training to meet specialized needs. Financial assistance for
trainees and for the trainers, if appropriate, such as tuition, travel
expenses to and from a training facility, and room and board while at
the training facility.
(3) Emergency response drills and exercises associated with
training, a course of study, and tests and evaluation of emergency
preparedness plans.
[[Page 68]]
(4) Expenses associated with training by a person (including a
department, agency, or instrumentality of a State or political
subdivision thereof or an Indian tribe) and activities necessary to
monitor such training including, but not limited to examinations,
critiques and instructor evaluations.
(5) Provision of staff to manage the training effort designed to
result in increased benefits, proficiency, and rapid deployment of local
and regional responders.
(6) Additional activities the Associate Administrator deems
appropriate to implement the scope of work for the proposed project and
approved in the grant.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377,
Aug. 28, 2001]
Sec. 110.50 Disbursement of Federal funds.
(a) Preaward expenditures may not be reimbursed.
(b) Reimbursement may not be made for a project plan unless approved
in the grant award.
(c) If a recipient agency seeks additional funds, the amendment
request will be evaluated on the basis of needs, performance and
availability of funds. An existing grant is not a commitment of future
Federal funding.
Sec. 110.60 Cost sharing for planning and training.
(a) The recipient agency must provide 20 percent of the direct and
indirect costs of all activities covered under the grant award program
with non-Federal funds. Recipients may either use cash (hard-match), in-
kind (soft-match) contributions, or a combination of in-kind plus hard-
match to meet this requirement. In-kind (soft-match) contributions are
in addition to the maintenance of effort required of recipients of grant
awards. The types of contributions allowed are as follows:
(1) Any funds from a State, local, or other non-Federal source used
for an eligible activity as defined in Sec. 110.40 in this part.
(2) The dollar equivalent value of an eligible activity as defined
in Sec. 110.40 of this part provided by a State, local, or other non-
Federal source.
(3) The value of participants' salary while attending a planning or
training activity contained in the approved grant application provided
by a State, local, or other non-Federal source.
(4) Additional types of in-kind contributions the Associate
Administrator deems appropriate.
(b) Funds used for matching purposes under any other Federal grant
or cooperative agreement may not be used for matching purposes. The
funds expended by a recipient agency to qualify for the grant may not be
used for cost-sharing purposes.
(c) Acceptable contributions for matching and cost sharing purposes
must conform to 49 CFR part 18.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59
FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001]
Sec. 110.70 Financial administration.
(a) A State must expend and account for grant funds in accordance
with State laws and procedures for expending and accounting for its own
funds. Fiscal control and accounting procedures of the State, as well as
its subgrantees and cost-type contractors, must be sufficient to:
(1) Permit the preparation of reports required by 49 CFR part 18 and
this part, including the tracing of funds provided for planning to a
level of expenditure adequate to establish that at least 75 percent of
the funds provided were made available to LEPCs for developing,
improving, and implementing emergency plans; and the tracing of funds
provided for training to a level of expenditure adequate to establish
that at least 75 percent of the funds provided were made available for
the purposes of training public sector employees employed or used by
political subdivisions.
(2) Permit the tracing of funds to a level of expenditure adequate
to establish that such funds have not been used in violation of the
restrictions and prohibitions of applicable statutes.
(b) The financial management systems of Indian tribes and any
subgrantees must meet the standards of 49 CFR 18.20, including the
ability to trace funds provided for training to a level of expenditure
adequate to establish that at least 75 percent of the
[[Page 69]]
funds provided were made available for the purposes of training public
sector employees employed or used by political subdivisions.
(c) Advances shall be made to States and Indian tribes consistent
with 49 CFR part 18 and 31 CFR part 205. The Associate Administrator
shall base these advances on demonstrated need, which will be determined
on a case-by-case basis, considering such factors as State/Tribal budget
constraints and reductions in amounts budgeted for hazardous materials
activities. To obtain an advance, a State or Indian tribe must comply
with the following requirements:
(1) A letter from the Governor or Tribal leader or their designee is
required specifying the extenuating circumstances requiring the funding
advance for the grant;
(2) The maximum advance request may not be more than $25,000 for
each State or Indian tribe;
(3) Recipients of advance funding must obligate those funds within 3
months of receipt;
(4) Advances including interest will be deducted from the initial
reimbursement to the State or Indian tribe; and
(5) The State or Indian tribe will have its allocation of current
grant funds reduced and will not be permitted to apply for future grant
funds until the advance is covered by a request for reimbursement. For
example, if $25,000 is advanced for personnel costs, this advance would
be deducted from the initial reimbursement in the year the advance was
made.
(d) To be allowable, costs must be eligible, reasonable, necessary,
and allocable to the approved project in accordance with OMB Circular A-
87 and included in the grant award. Costs incurred prior to the award of
any grant are not allowable. Recipient agencies are responsible for
obtaining audits in accordance with the Single Audit Act of 1984 (31
U.S.C. 7501), 49 CFR part 90, and OMB Circular A-128. Audits shall be
made by an independent auditor in accordance with generally accepted
government auditing standards covering financial and compliance audits.
The Associate Administrator may audit a recipient agency at any time.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377,
Aug. 28, 2001]
Sec. 110.80 Procurement.
Project managers shall use procurement procedures and practices
which reflect applicable State laws and regulations and Federal
requirements as specified in 49 CFR 18.36.
Sec. 110.90 Grant monitoring, reports, and records retention.
(a) Grant monitoring. Project managers are responsible for managing
the day-to-day operations of grant, subgrant and contract-supported
activities. Project managers must monitor performance of supported
activities to assure compliance with applicable Federal requirements and
achievement of performance goals. Monitoring must cover each program,
function, activity, or task covered by the grant. Monitoring and
reporting requirements for planning and training are contained in this
part; general grant reporting requirements are specified in 49 CFR
18.40.
(b) Reports. (1) The project manager shall submit a performance
report at the completion of an activity for which reimbursement is being
requested or with a request to amend the grant. The final performance
report is due 90 days after the expiration or termination of the grant.
(2) Project managers shall submit an original and two copies of all
performance reports. Performance reports for planning and training must
include comparison of actual accomplishments to the stated goals and
objectives established for the performance period, and the reasons for
not achieving those goals and objectives, if applicable.
(3) Project managers shall report developments or events that occur
between the required performance reporting dates which have significant
impact upon the planning and training activity such as:
(i) Problems, delays, or adverse conditions which will impair the
ability to meet the objective of the grant; and
[[Page 70]]
(ii) Favorable developments which enable meeting time schedules and
objectives sooner or at less cost than anticipated or producing more
beneficial results than originally planned.
(4) Financial reporting, except as provided in Sec. 110.70 and 49
CFR 18.41, shall be supplied quarterly using Standard Form 270, Request
for Advance or Reimbursement, to report the status of funds. The project
manager shall report separately on planning and training.
(c) Records retention. In accordance with 49 CFR 18.42, all
financial and programmatic records, supporting documents, statistical
records, training materials, and other documents generated under a grant
shall be maintained by the project manager for three years from the date
the project manager submits the final financial status report (SF 269)
or Request for Advance or Reimbursement (SF 270). The project manager
shall designate a repository and single-point of contact for planning
and for training, or both, for these purposes. If any litigation, claim,
negotiation, audit or other action involving the records has been
started before the expiration of the 3-year period, the records must be
retained until completion of the action and resolution of all issues
which arise from it, or until the end of the regular 3-year period,
whichever is later.
Sec. 110.100 Enforcement.
If a recipient agency fails to comply with any term of an award
(whether stated in a Federal statute or regulation, an assurance, a
State plan or application, a notice of award, or elsewhere) a
noncompliance action may be taken as specified in 40 CFR 18.43. The
recipient agency may appeal any such actions as specified in 49 CFR part
18. Costs incurred by the recipient agency during a suspension or after
termination of an award are not allowable unless the Associate
Administrator authorizes it in writing. Grant awards may be terminated
in whole or in part with the consent of the recipient at any agreed upon
effective date, or by the recipient upon written notification.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377,
Aug. 28, 2001]
Sec. 110.110 After-grant requirements.
The Associate Administrator will close out the award upon
determination that all applicable administrative actions and all
required work of the grant are complete in accordance with subpart D of
49 CFR part 18. The project manager must submit all financial,
performance, and other reports required as a condition of the grant,
within 90 days after the expiration or termination of the grant. This
time frame may be extended by the Associate Administrator for Hazardous
Materials Safety for cause.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377,
Aug. 28, 2001]
Sec. 110.120 Deviation from this part.
Recipient agencies may request a deviation from the non-statutory
provisions of this part. The Associate Administrator will respond to
such requests in writing. If appropriate, the decision will be included
in the grant agreement. Request for deviations from part 110 must be
submitted to: Grants Manager, Pipeline and Hazardous Materials Safety
Administration, U.S. Department of Transportation, 400 7th Street, SW.,
Washington, DC 20590-0001.
[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59
FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001]
Sec. 110.130 Disputes.
Disputes should be resolved at the lowest level possible, beginning
with the project manager and the project officer. If an agreement cannot
be reached, the Administrator, PHMSA, will serve as the dispute
resolution official, whose decision will be final.
[[Page 71]]
SUBCHAPTER B_OIL TRANSPORTATION
PART 130_OIL SPILL PREVENTION AND RESPONSE PLANS--Table of Contents
Sec.
130.1 Purpose.
130.2 Scope.
130.3 General requirements.
130.5 Definitions.
130.11 Communication requirements.
130.21 Packaging requirements.
130.31 Response plans.
130.33 Response plan implementation.
Authority: 33 U.S.C. 1321.
Source: Amdt. 130-2, 61 FR 30541, June 17, 1996, unless otherwise
noted.
Sec. 130.1 Purpose.
This part prescribes prevention, containment and response planning
requirements of the Department of Transportation applicable to
transportation of oil by motor vehicles and rolling stock.
Sec. 130.2 Scope.
(a) The requirements of this part apply to--
(1) Any liquid petroleum oil in a packaging having a capacity of
3,500 gallons or more; and
(2) Any liquid petroleum or non-petroleum oil in a quantity greater
than 42,000 gallons per packaging.
(b) The requirements of this part have no effect on--
(1) The applicability of the Hazardous Materials Regulations set
forth in subchapter C of this chapter; and
(2) The discharge notification requirements of the United States
Coast Guard (33 CFR part 153) and EPA (40 CFR part 110).
(c) The requirements of this part do not apply to--
(1) Any mixture or solution in which oil is in a concentration by
weight of less than 10 percent.
(2) Transportation of oil by aircraft or vessel.
(3) Any petroleum oil carried in a fuel tank for the purpose of
supplying fuel for propulsion of the transport vehicle to which it is
attached.
(4) Oil transport exclusively within the confines of a non-
transportation-related or terminal facility in a vehicle not intended
for use in interstate or intrastate commerce (see 40 CFR part 112,
appendix A).
(d) The requirements in Sec. 130.31(b) of this part do not apply to
mobile marine transportation-related facilities (see 33 CFR part 154).
Sec. 130.3 General requirements.
No person may offer or accept for transportation or transport oil
subject to this part unless that person--
(a) Complies with this part; and
(b) Has been instructed on the applicable requirements of this part.
Sec. 130.5 Definitions.
In this subchapter: Animal fat means a non-petroleum oil, fat, or
grease derived from animals, not specifically identified elsewhere in
this part.
Contract or other means is:
(1) A written contract with a response contractor identifying and
ensuring the availability of the necessary personnel or equipment within
the shortest practicable time;
(2) A written certification by the owner or operator that the
necessary personnel or equipment can and will be made available by the
owner or operator within the shortest practicable time; or
(3) Documentation of membership in an oil spill response
organization that ensures the owner's or operator's access to the
necessary personnel or equipment within the shortest practicable time.
EPA means the U.S. Environmental Protection Agency.
Liquid means a material that has a vertical flow of over two inches
(50 mm) within a three-minute period, or a material having one gram or
more liquid separation, when determined in accordance with the
procedures specified in ASTM D 4359-84, ``Standard Test Method for
Determining Whether a Material is a Liquid or a Solid,'' 1990 edition,
which is incorporated by reference.
Note: This incorporation by reference has been approved by the
Director of the Federal Register in accordance with 5 U.S.C. 552(a) and
1 CFR part 51. A copy may be obtained
[[Page 72]]
from the American Society for Testing and Materials, 1916 Race Street,
Philadelphia, PA 19103. Copies may be inspected at the Office of
Hazardous Materials Safety, Office of Hazardous Materials Standards,
Room 8422, DOT headquarters building, 400 7th St., SW, Washington, DC
20590, or at the National Archives and Records Administration (NARA).
For information on the availability of this material at NARA, call 202-
741-6030, or go to: http://www.archives.gov/federal--register/code--of--
federal--regulations/ibr--locations.html.
Maximum extent practicable means the limits of available technology
and the practical and technical limits on an owner or operator of an
onshore facility in planning the response resources required to provide
the on-water recovery capability and the shoreline protection and
cleanup capability to conduct response activities for a worst-case
discharge of oil in adverse weather.
Non-petroleum oil means any animal fat, vegetable oil or other non-
petroleum oil.
Oil means oil of any kind or in any form, including, but not limited
to, petroleum, fuel oil, sludge, oil refuse, and oil mixed with wastes
other than dredged spoil.
Note: This definition does not include hazardous substances (see 40
CFR part 116).
Other non-petroleum oil means a non-petroleum oil of any kind that
is not an animal fat or vegetable oil.
Packaging means a receptacle and any other components or materials
necessary for the receptacle to perform its containment function in
conformance with the packaging requirements of this part. A
compartmented tank is a single packaging.
Person means an individual, firm, corporation, partnership,
association, State, municipality, commission, or political subdivision
of a State, or any interstate body, as well as a department, agency, or
instrumentality of the executive, legislative or judicial branch of the
Federal Government.
Petroleum oil means any oil extracted or derived from geological
hydrocarbon deposits, including fractions thereof.
Qualified individual means an individual familiar with the response
plan, trained in his or her responsibilities in implementing the plan,
and authorized, on behalf of the owner or operator, to initiate all
response activities identified in the plan, to enter into response-
related contracts and obligate funds for such contracts, and to act as a
liaison with the on-scene coordinator and other responsible officials.
The qualified individual must be available at all times the owner or
operator is engaged in transportation subject to part 130 (alone or in
conjunction with an equally qualified alternate), must be fluent in
English, and must have in his or her possession documentation of the
required authority.
Transports or Transportation means any movement of oil by highway or
rail, and any loading, unloading, or storage incidental thereto.
Vegetable oil means a non-petroleum oil or fat derived from plant
seeds, nuts, kernels or fruits, not specifically identified elsewhere in
this part.
Worst-case discharge means ``the largest foreseeable discharge in
adverse weather conditions,'' as defined at 33 U.S.C. 1321(a)(24). The
largest foreseeable discharge from a motor vehicle or rail car is the
capacity of the cargo container. The term ``maximum potential
discharge,'' used in Sec. 130.31(a), is synonymous with ``worst-case
discharge.''
[Amdt. 130-2, 61 FR 30541, June 17, 1996, as amended by 66 FR 45378,
Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 69 FR 18803, Apr. 9, 2004]
Sec. 130.11 Communication requirements.
(a) No person may offer oil subject to this part for transportation
unless that person provides the person accepting the oil for
transportation a document indicating the shipment contains oil.
(b) No person may transport oil subject to this part unless a
readily available document indicating that the shipment contains oil is
in the possession of the transport vehicle operator during
transportation.
(c) A material subject to the requirements of this part need not be
specifically identified as oil when the shipment document accurately
describes the material as: aviation fuel, diesel fuel, fuel oil,
gasoline, jet fuel, kerosene, motor fuel, or petroleum.
Sec. 130.21 Packaging requirements.
Each packaging used for the transportation of oil subject to this
part
[[Page 73]]
must be designed, constructed, maintained, closed, and loaded so that,
under conditions normally incident to transportation, there will be no
release of oil to the environment.
Sec. 130.31 Response plans.
(a) After September 30, 1993, no person may transport oil subject to
this part unless that person has a current basic written plan that:
(1) Sets forth the manner of response to discharges that may occur
during transportation;
(2) Takes into account the maximum potential discharge of the
contents from the packaging;
(3) Identifies private personnel and equipment available to respond
to a discharge;
(4) Identifies the appropriate persons and agencies (including their
telephone numbers) to be contacted in regard to such a discharge and its
handling, including the National Response Center; and
(5) For each motor carrier, is retained on file at that person's
principal place of business and at each location where dispatching of
motor vehicles occurs; and for each railroad, is retained on file at
that person's principal place of business and at the dispatcher's
office.
(b) After February 18, 1993, no person may transport an oil subject
to this part in a quantity greater than 1,000 barrels (42,000 gallons)
unless that person has a current comprehensive written plan that:
(1) Conforms with all requirements specified in paragraph (a) of
this section;
(2) Is consistent with the requirements of the National Contingency
Plan (40 CFR part 300) and Area Contingency Plans;
(3) Identifies the qualified individual having full authority to
implement removal actions, and requires immediate communications between
that individual and the appropriate Federal official and the persons
providing spill response personnel and equipment;
(4) Identifies, and ensures by contract or other means the
availability of, private personnel (including address and phone number),
and the equipment necessary to remove, to the maximum extent
practicable, a worst case discharge (including a discharge resulting
from fire or explosion) and to mitigate or prevent a substantial threat
of such a discharge;
(5) Describes the training, equipment testing, periodic unannounced
drills, and response actions of facility personnel, to be carried out
under the plan to ensure the safety of the facility and to mitigate or
prevent the discharge, or the substantial threat of such a discharge;
and
(6) Is submitted, and resubmitted in the event of any significant
change, to the Federal Railroad Administrator (for tank cars), or to the
Federal Highway Administrator (for cargo tanks) at 400 Seventh Street
SW, Washington, DC 20590-0001.
(Approved by the Office of Management and Budget under control number
2137-0591)
Sec. 130.33 Response plan implementation.
If, during transportation of oil subject to this part, a discharge
occurs--into or on the navigable waters of the United States; on the
adjoining shorelines to the navigable waters; or that may affect natural
resources belonging to, appertaining to, or under the exclusive
management authority of, the United States--the person transporting the
oil shall implement the plan required by Sec. 130.31, in a manner
consistent with the National Contingency Plan, 40 CFR part 300, or as
otherwise directed by the Federal on-scene coordinator.
[[Page 74]]
SUBCHAPTER C_HAZARDOUS MATERIALS REGULATIONS
PART 171_GENERAL INFORMATION, REGULATIONS, AND DEFINITIONS--Table
of Contents
Sec.
171.1 Applicability of Hazardous Materials Regulations (HMR) to persons
and functions.
171.2 General requirements.
171.3 Hazardous waste.
171.4 Marine pollutants.
171.6 Control numbers under the Paperwork Reduction Act.
171.7 Reference material.
171.8 Definitions and abbreviations.
171.9 Rules of construction.
171.10 Units of measure.
171.11 Use of ICAO Technical Instructions.
171.12 Import and export shipments.
171.12a Canadian shipments and packagings.
171.14 Transitional provisions for implementing certain requirements.
171.15 Immediate notice of certain hazardous materials incidents.
171.16 Detailed hazardous materials incident reports.
171.17-171.18 [Reserved]
171.19 Approvals or authorizations issued by the Bureau of Explosives.
171.20 Submission of Examination Reports.
171.21 Assistance in investigations and special studies.
Authority: 49 U.S.C. 5101-5127, 44701; 49 CFR 1.45 and 1.53; Pub. L.
101-410 section 4 (28 U.S.C. 2461 note); Pub. L. 104-134 section 31001.
Editorial Note: Nomenclature changes to part 171 appear at 70 FR
56090, Sept. 23, 2005.
Sec. 171.1 Applicability of Hazardous Materials Regulations (HMR) to
persons and functions.
Federal hazardous materials transportation law (49 U.S.C. 5101 et
seq.) directs the Secretary of Transportation to establish regulations
for the safe and secure transportation of hazardous materials in
commerce, as the Secretary considers appropriate. The Secretary is
authorized to apply these regulations to persons who transport hazardous
materials in commerce. In addition, the law authorizes the Secretary to
apply these regulations to persons who cause hazardous materials to be
transported in commerce. The law also authorizes the Secretary to apply
these regulations to persons who manufacture or maintain a packaging or
a component of a packaging that is represented, marked, certified, or
sold as qualified for use in the transportation of a hazardous material
in commerce. Federal hazardous material transportation law also applies
to anyone who indicates by marking or other means that a hazardous
material being transported in commerce is present in a package or
transport conveyance when it is not, and to anyone who tampers with a
package or transport conveyance used to transport hazardous materials in
commerce or a required marking, label, placard, or shipping description.
Regulations prescribed in accordance with Federal hazardous materials
transportation law shall govern safety aspects, including security, of
the transportation of hazardous materials that the Secretary considers
appropriate. In 49 CFR 1.53, the Secretary delegated authority to issue
regulations for the safe and secure transportation of hazardous
materials in commerce to the Pipeline and Hazardous Materials Safety
Administrator. The Administrator issues the Hazardous Materials
Regulations (HMR; 49 CFR Parts 171 through 180) under that delegated
authority. This section addresses the applicability of the HMR to
packagings represented as qualified for use in the transportation of
hazardous materials in commerce and to pre-transportation and
transportation functions.
(a) Packagings. Requirements in the HMR apply to each person who
manufactures, fabricates, marks, maintains, reconditions, repairs, or
tests a packaging or a component of a packaging that is represented,
marked, certified, or sold as qualified for use in the transportation of
a hazardous material in commerce, including each person under contract
with any department, agency, or instrumentality of the executive,
legislative, or judicial branch of the Federal government who
manufactures, fabricates, marks, maintains, reconditions, repairs, or
tests a packaging or a component of a packaging that is represented,
marked, certified,
[[Page 75]]
or sold as qualified for use in the transportation of a hazardous
material in commerce.
(b) Pre-transportation functions. Requirements in the HMR apply to
each person who offers a hazardous material for transportation in
commerce, causes a hazardous material to be transported in commerce, or
transports a hazardous material in commerce and who performs or is
responsible for performing a pre-transportation function, including each
person performing pre-transportation functions under contract with any
department, agency, or instrumentality of the executive, legislative, or
judicial branch of the Federal government. Pre-transportation functions
include, but are not limited to, the following:
(1) Determining the hazard class of a hazardous material.
(2) Selecting a hazardous materials packaging.
(3) Filling a hazardous materials packaging, including a bulk
packaging.
(4) Securing a closure on a filled or partially filled hazardous
materials package or container or on a package or container containing a
residue of a hazardous material.
(5) Marking a package to indicate that it contains a hazardous
material.
(6) Labeling a package to indicate that it contains a hazardous
material.
(7) Preparing a shipping paper.
(8) Providing and maintaining emergency response information.
(9) Reviewing a shipping paper to verify compliance with the HMR or
international equivalents.
(10) For each person importing a hazardous material into the United
States, providing the shipper with timely and complete information as to
the HMR requirements that will apply to the transportation of the
material within the United States.
(11) Certifying that a hazardous material is in proper condition for
transportation in conformance with the requirements of the HMR.
(12) Loading, blocking, and bracing a hazardous materials package in
a freight container or transport vehicle.
(13) Segregating a hazardous materials package in a freight
container or transport vehicle from incompatible cargo.
(14) Selecting, providing, or affixing placards for a freight
container or transport vehicle to indicate that it contains a hazardous
material.
(c) Transportation functions. Requirements in the HMR apply to
transportation of a hazardous material in commerce and to each person
who transports a hazardous material in commerce, including each person
under contract with any department, agency, or instrumentality of the
executive, legislative, or judicial branch of the Federal government who
transports a hazardous material in commerce. Transportation of a
hazardous material in commerce begins when a carrier takes physical
possession of the hazardous material for the purpose of transporting it
and continues until the package containing the hazardous material is
delivered to the destination indicated on a shipping document, package
marking, or other medium, or, in the case of a rail car, until the car
is delivered to a private track or siding. For a private motor carrier,
transportation of a hazardous material in commerce begins when a motor
vehicle driver takes possession of a hazardous material for the purpose
of transporting it and continues until the driver relinquishes
possession of the package containing the hazardous material at its
destination and is no longer responsible for performing functions
subject to the HMR with respect to that particular package.
Transportation of a hazardous material in commerce includes the
following:
(1) Movement. Movement of a hazardous material by rail car,
aircraft, motor vehicle, or vessel (except as delegated by Department of
Homeland Security Delegation No. 0170 at 2(103)).
(2) Loading incidental to movement of a hazardous material. Loading
of packaged or containerized hazardous material onto a transport
vehicle, aircraft, or vessel for the purpose of transporting it,
including blocking and bracing a hazardous materials package in a
freight container or transport vehicle, and segregating a hazardous
materials package in a freight container or transport vehicle from
incompatible cargo, when performed by carrier personnel or in the
presence of carrier personnel.
[[Page 76]]
For a bulk packaging, loading incidental to movement is filling the
packaging with a hazardous material for the purpose of transporting it
when performed by carrier personnel or in the presence of carrier
personnel (except as delegated by Department of Homeland Security
Delegation No. 0170 at 2(103)), including transloading.
(3) Unloading incidental to movement of a hazardous material.
Removing a package or containerized hazardous material from a transport
vehicle, aircraft, or vessel; or for a bulk packaging, emptying a
hazardous material from the bulk packaging after the hazardous material
has been delivered to the consignee when performed by carrier personnel
or in the presence of carrier personnel or, in the case of a private
motor carrier, while the driver of the motor vehicle from which the
hazardous material is being unloaded immediately after movement is
completed is present during the unloading operation. (Emptying a
hazardous material from a bulk packaging while the packaging is on board
a vessel is subject to separate regulations as delegated by Department
of Homeland Security Delegation No. 0170 at 2(103).) Unloading
incidental to movement includes transloading.
(4) Storage incidental to movement of a hazardous material. Storage
of a transport vehicle, freight container, or package containing a
hazardous material by any person between the time that a carrier takes
physical possession of the hazardous material for the purpose of
transporting it until the package containing the hazardous material has
been delivered to the destination indicated on a shipping document,
package marking, or other medium, or, in the case of a private motor
carrier, between the time that a motor vehicle driver takes physical
possession of the hazardous material for the purpose of transporting it
until the driver relinquishes possession of the package at its
destination and is no longer responsible for performing functions
subject to the HMR with respect to that particular package.
(i) Storage incidental to movement includes--
(A) Storage at the destination shown on a shipping document,
including storage at a transloading facility, provided the original
shipping documentation identifies the shipment as a through-shipment and
identifies the final destination or destinations of the hazardous
material; and
(B) A rail car containing a hazardous material that is stored on
track that does not meet the definition of ``private track or siding''
in Sec. 171.8, even if the car has been delivered to the destination
shown on the shipping document.
(ii) Storage incidental to movement does not include storage of a
hazardous material at its final destination as shown on a shipping
document.
(d) Functions not subject to the requirements of the HMR. The
following are examples of activities to which the HMR do not apply:
(1) Storage of a freight container, transport vehicle, or package
containing a hazardous material at an offeror facility prior to a
carrier taking possession of the hazardous material for movement in
transportation in commerce or, for a private motor carrier, prior to a
motor vehicle driver taking physical possession of the hazardous
material for movement in transportation in commerce.
(2) Unloading of a hazardous material from a transport vehicle or a
bulk packaging performed by a person employed by or working under
contract to the consignee following delivery of the hazardous material
by the carrier to its destination and departure from the consignee's
premises of the carrier's personnel or, in the case of a private
carrier, departure of the driver from the unloading area.
(3) Storage of a freight container, transport vehicle, or package
containing a hazardous material after its delivery by a carrier to the
destination indicated on a shipping document, package marking, or other
medium, or, in the case of a rail car, storage of a rail car on private
track.
(4) Rail and motor vehicle movements of a hazardous material
exclusively within a contiguous facility boundary where public access is
restricted, except to the extent that the movement is on or crosses a
public road or is on track that is part of the
[[Page 77]]
general railroad system of transportation, unless access to the public
road is restricted by signals, lights, gates, or similar controls.
(5) Transportation of a hazardous material in a motor vehicle,
aircraft, or vessel operated by a Federal, state, or local government
employee solely for noncommercial Federal, state, or local government
purposes.
(6) Transportation of a hazardous material by an individual for non-
commercial purposes in a private motor vehicle, including a leased or
rented motor vehicle.
(7) Any matter subject to the postal laws and regulations of the
United States.
(e) Requirements of other Federal agencies. Each facility at which
pre-transportation or transportation functions are performed in
accordance with the HMR may be subject to applicable standards and
regulations of other Federal agencies.
(f) Requirements of state and local government agencies. (1) Under
49 U.S.C. 5125, a requirement of a state, political subdivision of a
state, or an Indian tribe is preempted, unless otherwise authorized by
another Federal statute or DOT issues a waiver of preemption, if--
(i) Complying with both the non-Federal requirement and Federal
hazardous materials transportation law, the regulations issued under
Federal hazardous material transportation law or a hazardous material
transportation security regulation or directive issued by the Secretary
of Homeland Security is not possible;
(ii) The non-Federal requirement, as applied or enforced, is an
obstacle to accomplishing and carrying out Federal hazardous materials
transportation law, the regulations issued under Federal hazardous
material transportation law, or a hazardous material transportation
security regulation or directive issued by the Secretary of Homeland
Security;
(iii) The non-Federal requirement is not substantively the same as a
provision of Federal hazardous materials transportation law, the
regulations issued under Federal hazardous material transportation law,
or a hazardous material transportation security regulation or directive
issued by the Secretary of Homeland Security with respect to--
(A) The designation, description, and classification of hazardous
material;
(B) The packing, repacking, handling, labeling, marking, and
placarding of hazardous material;
(C) The preparation, execution, and use of shipping documents
related to hazardous material and requirements related to the number,
contents, and placement of those documents;
(D) The written notification, recording, and reporting of the
unintentional release of hazardous material; or
(E) The design, manufacturing, fabricating, marking, maintenance,
reconditioning, repairing, or testing of a package or container
represented, marked, certified, or sold as qualified for use in
transporting hazardous material.
(iv) A non-Federal designation, limitation or requirement on highway
routes over which hazardous material may or may not be transported does
not comply with the regulations in subparts C and D of part 397 of this
title; or
(v) A fee related to the transportation of a hazardous material is
not fair or is used for a purpose that is not related to transporting
hazardous material, including enforcement and planning, developing, and
maintaining a capability for emergency response.
(2) Subject to the limitations in paragraph (f)(1) of this section,
each facility at which functions regulated under the HMR are performed
may be subject to applicable laws and regulations of state and local
governments and Indian tribes.
(3) The procedures for DOT to make administrative determinations of
preemption are set forth in subpart E of part 397 of this title with
respect to non-Federal requirements on highway routing (paragraph
(f)(1)(iv) of this section) and in subpart C of part 107 of this chapter
with respect to all other non-Federal requirements.
(g) Penalties for noncompliance. Each person who knowingly violates
a requirement of Federal hazardous material transportation law, an order
issued under Federal hazardous material transportation law, subchapter A
of
[[Page 78]]
this chapter, or an exemption or approval issued under subchapter A or C
of this chapter is liable for a civil penalty of not more than $32,500
and not less than $275 for each violation. (For a violation that
occurred after January 21, 1997, and before October 1, 2003, the maximum
and minimum civil penalties are $27,500 and $250, respectively.) When a
violation is a continuing one and involves transporting of hazardous
materials or causing them to be transported or shipped, each day of the
violation constitutes a separate offense. Federal hazardous material
transportation law provides that each person who knowingly violates a
requirement in Sec. 171.2(l) of this subchapter or willfully violates a
provision of Federal hazardous material transportation law or an order
issued under Federal hazardous material transportation law shall be
fined under Title 18, United States Code, or imprisoned for not more
than 5 years, or both.
[68 FR 61937, Oct. 30, 2003; 70 FR 20031, Apr. 15, 2005]
Sec. 171.2 General requirements.
(a) Each person who performs a function covered by this subchapter
must perform that function in accordance with this subchapter.
(b) Each person who offers a hazardous material for transportation
in commerce must comply with all applicable requirements of this
subchapter, or an exemption, approval, or registration issued under this
subchapter or under subchapter A of this chapter. There may be more than
one offeror of a shipment of hazardous materials. Each offeror is
responsible for complying with the requirements of this subchapter, or
an exemption, approval, or registration issued under this subchapter or
subchapter A of this chapter, with respect to any pre-transportation
function that it performs or is required to perform; however, each
offeror is responsible only for the specific pre-transportation
functions that it performs or is required to perform, and each offeror
may rely on information provided by another offeror, unless that offeror
knows or, a reasonable person, acting in the circumstances and
exercising reasonable care, would have knowledge that the information
provided by the other offeror is incorrect.
(c) Each person who performs a function covered by or having an
effect on a specification or activity prescribed in part 178, 179, or
180 of this subchapter, an approval issued under this subchapter, or an
exemption issued under subchapter A of this chapter, must perform the
function in accordance with that specification, approval, or exemption,
as appropriate.
(d) No person may offer or accept a hazardous material for
transportation in commerce or transport a hazardous material in commerce
unless that person is registered in conformance with subpart G of part
107 of this chapter, if applicable.
(e) No person may offer or accept a hazardous material for
transportation in commerce unless the hazardous material is properly
classed, described, packaged, marked, labeled, and in condition for
shipment as required or authorized by applicable requirements of this
subchapter or an exemption, approval, or registration issued under this
subchapter or subchapter A of this chapter.
(f) No person may transport a hazardous material in commerce unless
the hazardous material is transported in accordance with applicable
requirements of this subchapter, or an exemption, approval, or
registration issued under this subchapter or subchapter A of this
chapter. Each carrier who transports a hazardous material in commerce
may rely on information provided by the offeror of the hazardous
material or a prior carrier, unless the carrier knows or, a reasonable
person, acting in the circumstances and exercising reasonable care,
would have knowledge that the information provided by the offeror or
prior carrier is incorrect.
(g) No person may represent, mark, certify, sell, or offer a
packaging or container as meeting the requirements of this subchapter
governing its use in the transportation of a hazardous material in
commerce unless the packaging or container is manufactured, fabricated,
marked, maintained, reconditioned, repaired, and retested in accordance
with the applicable requirements of this subchapter. No person
[[Page 79]]
may represent, mark, certify, sell, or offer a packaging or container as
meeting the requirements of an exemption, approval, or registration
issued under this subchapter or subchapter A of this chapter unless the
packaging or container is manufactured, fabricated, marked, maintained,
reconditioned, repaired, and retested in accordance with the applicable
requirements of the exemption, approval, or registration issued under
this subchapter or subchapter A of this chapter. The requirements of
this paragraph apply whether or not the packaging or container is used
or to be used for the transportation of a hazardous material.
(h) The representations, markings, and certifications subject to the
prohibitions of paragraph (g) of this section include--
(1) Specification identifications that include the letters ``ICC'',
``DOT'', ``CTC'', ``MC'', or ``UN'';
(2) Exemption, approval, and registration numbers that include the
letters ``DOT'', ``EX'', ``M'', or ``R''; and
(3) Test dates associated with specification, registration,
approval, retest, or exemption markings indicating compliance with a
test or retest requirement of the HMR, or an exemption, approval, or
registration issued under the HMR or under subchapter A of this chapter.
(i) No person may certify that a hazardous material is offered for
transportation in commerce in accordance with the requirements of this
subchapter unless the hazardous material is properly classed, described,
packaged, marked, labeled, and in condition for shipment as required or
authorized by applicable requirements of this subchapter or an
exemption, approval, or registration issued under this subchapter or
subchapter A of this chapter. Each person who offers a package
containing a hazardous material for transportation in commerce in
accordance with the requirements of this subchapter or an exemption,
approval, or registration issued under this subchapter or subchapter A
of this chapter, must assure that the package remains in condition for
shipment until it is in the possession of the carrier.
(j) No person may, by marking or otherwise, represent that a
container or package for transportation of a hazardous material is safe,
certified, or in compliance with the requirements of this chapter unless
it meets the requirements of all applicable regulations issued under
Federal hazardous material transportation law.
(k) No person may, by marking or otherwise, represent that a
hazardous material is present in a package, container, motor vehicle,
rail car, aircraft, or vessel if the hazardous material is not present.
(l) No person may alter, remove, deface, destroy, or otherwise
unlawfully tamper with any marking, label, placard, or description on a
document required by Federal hazardous material transportation law or
the regulations issued under Federal hazardous material transportation
law. No person may alter, deface, destroy, or otherwise unlawfully
tamper with a package, container, motor vehicle, rail car, aircraft, or
vessel used for the transportation of hazardous materials.
(m) No person may falsify or alter an exemption, approval,
registration, or other grant of authority issued under this subchapter
or subchapter A of this chapter. No person may offer a hazardous
material for transportation or transport a hazardous material in
commerce under an exemption, approval, registration or other grant of
authority issued under this subchapter or subchapter A of this chapter
if such grant of authority has been altered without the consent of the
issuing authority. No person may represent, mark, certify, or sell a
packaging or container under an exemption, approval, registration or
other grant of authority issued under this subchapter or subchapter A of
this chapter if such grant of authority has been altered without the
consent of the issuing authority.
[68 FR 61937, Oct. 30, 2003, as amended at 70 FR 43643, July 28, 2005]
Sec. 171.3 Hazardous waste.
(a) No person may offer for transportation or transport a hazardous
waste (as defined in Sec. 171.8 of this subchapter) in interstate or
intrastate commerce except in accordance with the requirements of this
subchapter.
[[Page 80]]
(b) No person may accept for transportation, transport, or deliver a
hazardous waste for which a manifest is required unless that person:
(1) Has marked each motor vehicle used to transport hazardous waste
in accordance with Sec. 390.21 or Sec. 1058.2 of this title even
though placards may not be required;
(2) Complies with the requirements for manifests set forth in Sec.
172.205 of this subchapter; and
(3) Delivers, as designated on the manifest by the generator, the
entire quantity of the waste received from the generator or a
transporter to:
(i) The designated facility or, if not possible, to the designated
alternate facility;
(ii) The designated subsequent carrier; or
(iii) A designated place outside the United States.
Note: Federal law specifies penalties up to $250,000 fine for an
individual and $500,000 for a company and 5 years imprisonment for the
willful discharge of hazardous waste at other than designated
facilities. 49 U.S.C. 5124.
(c) If a discharge of hazardous waste or other hazardous material
occurs during transportation, and an official of a State or local
government or a Federal agency, acting within the scope of his official
responsibilities, determines that immediate removal of the waste is
necessary to prevent further consequence, that official may authorize
the removal of the waste without the preparation of a manifest. [Note:
In such cases, EPA does not require carriers to have EPA identification
numbers.]
Note 1: EPA requires shippers (generators) and carriers
(transporters) of hazardous wastes to have identification numbers which
must be displayed on hazardous waste manifests. See 40 CFR parts 262 and
263. (Identification number application forms may be obtained from EPA
regional offices.)
Note 2: In 40 CFR part 263, the EPA sets forth requirements for the
cleanup of releases of hazardous wastes.
[Amdt. 171-53, 45 FR 34586, May 22, 1980, as amended by Amdt. 171-53, 45
FR 74648, Nov. 10, 1980; Amdt. 171-78, 49 FR 10510, Mar. 20, 1984; Amdt.
171-107, 54 FR 40068, Sept. 29, 1989; Amdt. 171-111, 55 FR 52466, Dec.
21, 1990; 56 FR 66157, Dec. 20, 1991; Amdt. 171-2, 59 FR 49132, Sept.
26, 1994; Amdt. 171-141, 61 FR 21102, May 9, 1996]
Sec. 171.4 Marine pollutants.
(a) Except as provided in paragraph (c) of this section, no person
may offer for transportation or transport a marine pollutant, as defined
in Sec. 171.8, in intrastate or interstate commerce except in
accordance with the requirements of this subchapter.
(b) The requirements of this subchapter for the transportation of
marine pollutants are based on the provisions of Annex III of the 1973
International Convention for Prevention of Pollution from Ships, as
modified by the Protocol of 1978 (MARPOL 73/78).
(c) Exceptions. Except when transported aboard vessel, the
requirements of this subchapter specific to marine pollutants do not
apply to non-bulk packagings transported by motor vehicles, rail cars or
aircraft.
[Amdt. 171-116, 57 FR 52934, Nov. 5, 1993, as amended by Amdt. 107-39,
61 FR 51337, Oct. 1, 1996]
Sec. 171.6 Control numbers under the Paperwork Reduction Act.
(a) Purpose and scope. This section collects and displays the
control numbers assigned to the HMR collections of information by the
Office of Management and Budget (OMB) under the Paperwork Reduction Act
of 1995. This section complies with the requirements of 5 CFR 1320.7(f),
1320.12, 1320.13 and 1320.14 (OMB regulations implementing the Paperwork
Reduction Act of 1995) for the display of control numbers assigned by
OMB to collections of information of the HMR.
(b) OMB control numbers. The table in paragraph (b)(2) of this
section sets forth the control numbers assigned to collection of
information in the HMR by the Office of Management and Budget (OMB)
under the Paperwork Reduction Act of 1995.
(1) Column 1 lists the OMB control number assigned to the HMR
collections of information. Column 2 contains the Report Title of the
approved collection of information. Column 3 lists the part(s) or
section(s) in 49 CFR identified or described in the collection of
information.
(2) Table.
[[Page 81]]
------------------------------------------------------------------------
Title 49 CFR part or
section where
Current OMB control No. Title identified and
described
------------------------------------------------------------------------
2137-0014................. Cargo Tank Sec. Sec. 107.503,
Specification 107.504, 178.320,
Requirements. 178.337, 178.338,
178.345, 180.407,
180.409, 180.413,
180.417.
2137-0018................. Inspection and Sec. Sec. 173.24,
Testing of Portable 173.32, 178.3,
Tanks and 178.245, 178.255,
Intermediate Bulk 178.270, 178.273,
Containers. 178.274, 178.703,
178.801, 180.352,
180.605.
2137-0022................. Testing, Inspection, Sec. Sec.
and Marking 173.302a, 173.303,
Requirements for 173.304, 173.309,
Cylinders. 178.2, 178.3,
178.35, 178.44,
178.45, 178.46,
178.57, 178.59,
178.60, 178.61,
178.68, 180.205,
180.209, 180.211,
180.213, 180.215.
2137-0034................. Hazardous Materials Sec. Sec. 172.200,
Shipping Papers and 172.201, 172.203,
Emergency Response 172.204, 172.205,
Information. 172.600, 172.602,
172.604, 172.606,
173.6, 173.7,
173.22, 173.56,
174.24, 174.26,
174.114, 175.30,
175.31, 175.33,
175.35, 176.24,
176.27, 176.30,
176.36, 176.89,
177.817.
2137-0039................. Hazardous Materials Sec. Sec. 171.15,
Incidents Reports. 171.16.
2137-0051................. Rulemaking, Sec. Sec. 105.30,
Exemption, and 105.40, 106.95,
Preemption 106.110, 107.105,
Requirements. 107.107, 107.109,
107.113, 107.117,
107.121, 107.123,
107.125, 107.205,
107.211, 107.215,
107.217, 107.219,
107.221, 107.223.
2137-0510................. RAM Transportation Part 173, Subpart I,
Requirements. Sec. Sec. 173.22,
173.411, 173.415,
173.416, 173.417,
173.457, 173.471,
173.472, 173.473,
173.476.
2137-0542................. Flammable Cryogenic Sec. Sec. 173.318,
Liquids. 177.816, 177.840,
180.405.
2137-0557................. Approvals for Sec. Sec. 107.402;
Hazardous Materials. 107.403; 107.405;
107.503; 107.705;
107.713; 107.715;
107.717; 107.803;
107.805; 107.807;
110.30; 172.101;
172.102, Special
Provisions 26, 19,
53, 55, 60, 105,
118, 121, 125, 129,
131, 133, 136,
172.102, Special
Provisions 26, 19,
53, 55, 60, 105,
118, 121, 125, 129,
131, 133, 136;
Special Provisions
B45, B55, B61, B69,
B77, B81, N10, N72;
173a; 173.4; 173.7;
173.21; 173.22;
173.24; 173.38;
173.31; 173.51;
173.56; 173.58;
173.59; 173.124;
173.128; 173.159;
173.166; 173.171;
173.214; 173.222;
173.224; 173.225;
173.245; 173.301;
173.305; 173.306;
173.314; 173.315;
173.316; 173.318;
173.334; 173.340;
173.411; 173.433;
173.457; 173.471;
173.472; 173.476;
174.50; 174.63;
175.10; 175.701;
176.168; 176.340;
176.704; 178.3;
178.35; 178.47;
178.53; 178.270-3;
178.270-13; 178.273;
178.274; 178.503;
178.509; 178.605;
178.606; 178.608;
178.801; 178.813;
180.213.
2137-0559................. (Rail Carriers and Sec. Sec. 172.102,
Tank Car Tank Special provisions:
Requirements) B45, B46, B55, B61,
Requirements for B69, B77, B78, B81;
Rail Tank Car Tanks-- 173.10, 173.31,
Transportation of 174.20, 174.50,
Hazardous Materials 174.63, 174.104,
by Rail.. 174.114, 174.204,
179.3, 179.4, 179.5,
179.6, 179.7,
179.11, 179.18,
179.22, 179.100-9,
179.100-12, 179.100-
13, 179.100-16,
179.100-17, 179.102-
4, 179.102-17,
179.103-1, 179.103-
2, 179.103-3,
179.103-5, 179.200-
10, 179.200-14,
179.200-15, 179.200-
16, 179.200-17,
179.200-19, 179.201-
3, 179.201-8,
179.201-9, 179.220-
4, 179.220-7,
179.220-8, 179.220-
13, 179.220-15,
179.220-17, 179.220-
18, 179.220-20,
179.220-22, 179.300-
3, 179.300-7,
179.300-9, 179.300-
12, 179.300-13,
179.300-15, 179.300-
20, 179.400-3,
179.400-4, 179.400-
11, 179.400-13,
179.400-16, 179.400-
17, 179.400-19,
179.400-20, 179.500-
5, 179.500-8,
179.500-12, 179.500-
18, 180.505,
180.509, 180.515,
180.517.
2137-0572................. Testing Requirements Sec. Sec. 178.2,
for Non-Bulk 178.601.
Packaging.
2137-0582................. Container Sec. Sec. 176.27,
Certification 176.172.
Statement.
2137-0586................. Hazardous Materials Part 110.
Public Sector
Training and
Planning Grants.
[[Page 82]]
2137-0591................. Response Plans for Part 130.
Shipments of Oil.
2137-0595................. Cargo Tank Motor Sec. Sec. 173.315,
Vehicles in 178.337-8, 178.337-
Liquefied Compressed 9, 180.405, 180.416.
Gas Service.
2137-0612................. Hazardous Materials Part 172, Subpart I,
Security Plans. Sec. Sec.
172.800, 172.802,
172.804.
2137-0613................. Subsidiary Hazard Sec. Sec. 172.202,
Class and Number/ 172.203
Type of Packagings.
2137-0620................. Inspection and Part 173, Subpart A,
Testing of Meter Sec. 173.5a.
Provers.
------------------------------------------------------------------------
[Amdt. 171-111, 56 FR 66157, Dec. 20, 1991, as amended at 57 FR 1877,
Jan. 16, 1992; Amdt. 171-121, 58 FR 51527, Oct. 1, 1993; Amdt. 171-137,
61 FR 33254, June 26, 1996; 62 FR 51558, Oct. 1, 1997; 64 FR 51915,
Sept. 27, 1999; 64 FR 61220, Nov. 10, 1999; 65 FR 58619, Sept. 29, 2000;
67 FR 61012, Sept. 27, 2002; 67 FR 51640, Aug. 8, 2002; 68 FR 31628, May
28, 2003; 68 FR 45010, July 31, 2003; 69 FR 54045, Sept. 7, 2004; 70 FR
33379, June 8, 2005; 70 FR 56090, Sept. 23, 2005]
Sec. 171.7 Reference material.
(a) Matter incorporated by reference--(1) General. There is
incorporated, by reference in parts 170-189 of this subchapter, matter
referred to that is not specifically set forth. This matter is hereby
made a part of the regulations in parts 170-189 of this subchapter. The
matter subject to change is incorporated only as it is in effect on the
date of issuance of the regulation referring to that matter. The
material listed in paragraph (a)(3) has been approved for incorporation
by reference by the Director of the Federal Register in accordance with
5 U.S.C 552(a) and 1 CFR part 51. Material is incorporated as it exists
on the date of the approval and a notice of any change in the material
will be published in the Federal Register. Matters referenced by
footnote are included as part of the regulations of this subchapter.
(2) Accessibility of materials. All incorporated matter is available
for inspection at:
(i) The Office of Hazardous Materials Safety, Office of Hazardous
Materials Standards, Room 8422, NASSIF Building, 400 7th Street, SW.,
Washington, DC 20590; and
(ii) The National Archives and Records Administration (NARA). For
information on the availability of this material at NARA, call 202-741-
6030, or go to: http://www.archives.gov/federal--register/code--of--
federal--regulations/ibr--locations.html.
(3) Table of material incorporated by reference. The following table
sets forth material incorporated by reference. The first column lists
the name and address of the organization from which the material is
available and the name of the material. The second column lists the
section(s) of this subchapter, other than Sec. 171.7, in which the
matter is referenced. The second column is presented for information
only and may not be all inclusive.
------------------------------------------------------------------------
Source and name of material 49 CFR reference
------------------------------------------------------------------------
Air Transport Association of America, 1301
Pennsylvania Avenue, N.W., Washington, DC 20004-
1707:
ATA Specification No. 300 Packaging of 172.102.
Airline Supplies, Revision 19, July 31,
1996.
The Aluminum Association, 420 Lexington Avenue,
New York, NY 10017:
Aluminum Standards and Data, Seventh 172.102; 178.65.
Edition, June 1982.
American National Standards Institute, Inc., 25
West 43rd Street, New York, NY 10036:
ANSI/ASHRAE 15-94, Safety Code for 173.306; 173.307.
Mechanical Refrigeration.
ANSI B16.5-77, Steel Pipe Flanges, Flanged 178.360-4.
Fittings.
ANSI N14.1 Uranium Hexafluoride--Packaging 173.417; 173.420.
for Transport, 1971, 1982, 1987, 1990, 1995
and 2001 Editions.
American Petroleum Institute, 1220 L Street, NW,
Washington, D.C. 20005-4070:
API Recommended Practice Closures of 1604172.102.
Underground Petroleum Storage Tanks, 3rd
Edition, March 1996.
American Pyrotechnics Association (APA), P.O.
Box 213, Chestertown, MD 21620:
APA Standard 87-1, Standard for Construction 173.56.
and Approval for Transportation of
Fireworks, Novelties, and Theatrical
Pyrotechnics, December 1, 2001 version.
American Society of Mechanical Engineers, ASME
International, 22 Law Drive, P.O. Box 2900,
Fairfield, NJ 07007-2900:
[[Page 83]]
ASME Code, Sections II (Parts A and B), V, 172.102; 173.24b;
VIII (Division 1), and IX of 1998 Edition 173.32; 173.306;
of American Society of Mechanical Engineers 173.315; 173.318;
Boiler and Pressure Vessel Code. 173.420; 178.245-1;
178.245-3; 178.245-4;
178.245-6; 178.245-7;
178.255-1; 178.255-2;
178.255-14; 178.255-
15; 178.270-2;
178.270-3; 178.270-7;
178.270-9; 178.270-
11; 178.270-12;
178.271-1; 178.272-1;
178.273; 178.274;
178.276; 178.277;
178.320; 178.337-1;
178.337-2; 178.337-3;
178.337-4; 178.337-6;
178.337-16; 178.337-
18; 178.338-1;
178.338-2; 178.338-3;
178.338-4; 178.338-5;
178.338-6; 178.338-
13; 178.338-16;
178.338-18; 178.338-
19; 178.345-1;
178.345-2; 178.345-3;
178.345-4; 178.345-7;
178.345-14; 178.345-
15; 178.346-1;
178.347-1; 178.348-1;
179.400-3; 180.407.
Pipeline Transportation Systems for Liquid 173.5a.
Hydrocarbons and other Liquids, Chapters
II, III, IV, V and VI, ASME B31.4-1998
Edition.
American Society for Testing and Materials, 100
Barr Harbor Drive, West Conshohocken, PA 19428:
Noncurrent ASTM Standards are available
from: Engineering Societies Library, 354
East 47th Street, New York, NY 10017
ASTM A 20/A 20M-93a Standard Specification 178.337-2; 179.102-4;
for General Requirements for Steel Plates 179.102-1; 179.102-
for Pressure Vessels. 17.
ASTM A 47-68 Malleable Iron Castings........ 179.200-15.
ASTM A 240/A 240M-99b Standard Specification 178.57; 178.358-5;
for Heat-Resisting Chromium and Chromium- 179.100-7; 179.100-
Nickel Stainless Steel Plate, Sheet and 10; 179.102-1;
Strip for Pressure Vessels. 179.102-4; 179.102-
17; 179.200-7;
179.201-5; 179.220-7;
179.300-7; 179.400-5.
ASTM A 242-81 Standard Specification for 178.338-2.
High-Strength Low-Alloy Structural Steel.
[[Page 84]]
ASTM A 262-93a Standard Practices for 179.100-7; 179.200-7;
Detecting Susceptibility to Intergranular 179.201-4.
Attack in Austenitic Stainless Steels.
ASTM A 285-78 Pressure Vessel Plates, Carbon 179.300-7.
Steel, Low- and Intermediate-Tensile
Strength.
ASTM A 300-58 Steel Plates for Pressure 178.337-2.
Vessels for Service at Low Temperatures.
ASTM A 302/A 302M-93 Standard Specification 179.100-7; 179.200-7;
for Pressure Vessel Plates, Alloy Steel, 179.220-7.
Manganese-Molybdenum and Manganese-
Molybdenum Nickel.
ASTM A 333-67 Seamless and Welded Steel Pipe 178.45.
for Low-Temperature Service.
ASTM A 370-94 Standard Test 179.102-1; 179.102-17.
179.102-4; Methods and Definitions for
Mechanical Testing of Steel Products.
ASTM A 441-81 Standard Specification for 178.338-2.
High-Strength Low-Alloy Structural
Manganese Vanadium Steel.
ASTM A 514-81 Standard Specification for 178.338-2.
High-Yield Strength Quenched and Tempered
Alloy Steel Plate, Suitable for Welding.
ASTM A 515/A 515M-03 Standard Specification 179.300-7.
for Pressure Vessel Plates, Carbon Steel,
for Intermediate- and Higher-Temperature
Service.
ASTM A 516/A 516M-90 Standard Specification 178.337-2; 179.100-7;
for Pressure Vessel Plates, Carbon Steel, 179.102-1; 179.102-2;
for Moderate and Lower-Temperature Service. 179.102-4; 179.102-
17; 179.200-7;
179.220-7; 179.300-7.
ASTM A 537/A 537M-91 Standard Specification 179.100-7; 179.102-4;
for Pressure Vessel Plates, Heat-Treated, 179.102-17.
Carbon-Manganese-Silicon Steel.
ASTM A 572-82 Standard Specification for 178.338-2.
High-Strength Low-Alloy Columbian-Vanadium
Steels of Structural Quality.
ASTM A 588-81 Standard Specification for 178.338-2.
High-Strength Low-Alloy Structural Steel
with 50 Ksi Minimum Yield Point to 4 in.
Thick.
ASTM A 606-75 Standard Specification for 178.338-2.
Steel Sheet and Strip Hot- Rolled and Cold-
Rolled, High-Strength, Low-Alloy, with
Improved Atmospheric Corrosion Resistance,
1975 (Reapproved 1981).
ASTM A 607-98 Standard Specification for 178.338-2.
Steel, Sheet and Strip, High-Strength, Low-
Alloy, Columbium or Vanadium, or Both, Hot-
Rolled and Cold-Rolled.
ASTM A 612-72a High Strength Steel Plates 178.337-2.
for Pressure Vessels for Moderate and Lower
Temperature Service.
ASTM A 633-79a Standard Specification for 178.338-2.
Normalized High-Strength Low-Alloy
Structural Steel, 1979 Edition.
ASTM A 715-81 Standard Specification for 178.338-2.
Steel Sheet and Strip, Hot-Rolled, High-
Strength, Low-Alloy with Improved
Formability, 1981.
ASTM A 1008/A 1008M--03 Standard 178.338-2; 178.345-2
Specification for Steel, Sheet, Cold-
Rolled, Carbon, Structural, High-Strength
Low-Alloy and High Strength Low-Alloy with
Improved Formability.
ASTM A 1011/A 1011M--03a Standard 178.338-2; 178.345-2
Specification for Steel, Sheet and Strip,
Hot-Rolled, Carbon, Structural, High-
Strength Low Alloy and High Strength Low-
Alloy with Improved Formability.
ASTM B 162-93a Standard Specification for 173.249; 179.200-7.
Nickel Plate, Sheet, and Strip.
ASTM B 209-93 Standard Specification for 179.100-7; 179.200-7;
Aluminum and Aluminum-Alloy Sheet and Plate. 179.220-7.
ASTM B 221-76 Aluminum Alloy Extruded Bars, 178.46.
Rods, Shapes, and Tubes.
ASTM B 557-84 Tension Testing Wrought and 178.46.
Cast Aluminum and Magnesium-Alloy Products.
ASTM B 580-79 Standard Specification for 173.316; 173.318;
Anodic Oxide Coatings on Aluminum, (Re- 178.338-17.
approved 2000).
ASTM D 1238-90b Standard Test Method for 173.225.
Flow Rates of Thermoplastics for Extrusion
Plastometer.
ASTM D 1709-01 Standard Text Methods for 173.197.
Impact Resistance of Plastic Film by the
Free-Falling Dart Method.
ASTM D 1835-97 Standard Specification for 180.209.
Liquefied Petroleum (LP) Gases.
ASTM D 1838-64 Copper Strip Corrosion by 173.315.
Liquefied Petroleum (LP) Gases.
ASTM D 1922-00a Standard Test Method for 173.197.
Propogation Tear Resistance of Plastic Film
and Thin Sheeting by Pendulum Method.
ASTM D 4206-96 Standard Test Method for 173.120.
Sustained Burning of Liquid Mixtures Using
the Small Scale Open-Cup Apparatus.
ASTM D 4359-90 Standard Test Method for 171.8.
Determining Whether a Material is a Liquid
or a Solid.
[[Page 85]]
ASTM E 8-99 Standard Test Methods for 178.36; 178.37;
Tension Testing of Metallic Materials. 178.38; 178.39;
178.44; 178.45;
178.50; 178.51;
178.53; 178.55;
178.56; 178.57;
178.58; 178.59;
178.60; 178.61;
178.68.
ASTM E 23-98 Standard Test Methods for 178.57.
Notched Bar Impact Testing of Metallic
Materials.
ASTM E 112-88 Standard Test Methods for 178.44.
Determining Average Grain Size.
ASTM E 112-96 Standard Test Methods for 178.274; Part 178,
Determining Average Grain Size, 1996 appendix A.
Edition.
ASTM E 114-95 Standard Practice for 178.45.
Ultrasonic Pulse-Echo Straight-Beam
Examination by the Contact Method.
ASTM E 213-98 Standard Practice for 178.45.
Ultrasonic Examination of Metal Pipe and
Tubing.
American Water Works Association, 1010 Vermont
Avenue, N.W., Suite 810, Washington, DC 20005:
AWWA Standard C207-55, Steel Pipe Flanges, 178.360-4.
1955.
American Welding Society, 550 N.W. Le Jeune
Road, Miami, Florida 33126:
AWS Code B 3.0; Standard Qualification 178.356-2, 178.358-2.
Procedure; 1972 (FRB 3.0-41, rev. May 1973).
AWS Code D 1.0; Code for Welding in Building 178.356-2; 178.358-2.
Construction (FR D 1.0-66, 1966).
Association of American Railroads, American
Railroads Building, 50 F Street, NW.,
Washington, DC 20001:
AAR Manual of Standards and Recommended 173.31; 174.63; 179.6;
Practices, Section C--Part III, 179.7; 179.15;
Specifications for Tank Cars, Specification 179.16; 179.20;
M-1002, (AAR Specifications for Tank Cars), 179.22; 179.100-9;
December 2000. 179.100-10; 179.100-
12; 179.100-13;
179.100-14; 179.100-
18; 179.101-1;
179.102-1; 179.102-4;
179.102-17; 179.103-
5; 179.200-7; 179.200-
9; 179.200-10;
179.200-11; 179.200-
13; 179.200-17;
179.200-22; 179.201-
6; 179.220-6; 179.220-
7; 179.220-10;
179.220-11; 179.220-
14; 179.220-18;
179.220-26; 179.300-
9; 179.300-10;
179.300-15; 179.300-
17; 179.400-5;
179.400-6; 179.400-8;
179.400-11; 179.400-
12; 179.400-15;
179.400-18; 179.400-
20; 179.400-25;
180.509; 180.513;
180.515; 180.517.
AAR Manual of Standards and Recommended 174.55; 174.63.
Practices, Section I, Specially Equipped
Freight Car and Intermodal Equipment, 1988.
AAR Specifications for Design, Fabrication 179.16.
and Construction of Freight Cars, Volume 1,
1988.
Chlorine Institute, Inc., 1300 Wilson Boulevard,
Arlington, VA 22209
[[Page 86]]
Chlorine Institute Emergency Kit ``A'' for 173.3
100-lb. & 150 lb. Chlorine Cylinders (with
the exception of repair method using Device
8 for side leaks), Edition 10, June 2003.
Chlorine Institute Emergency Kit ``B'' for 173.3
Chlorine Ton Containers (with the exception
of repair method using Device 9 for side
leaks), Edition 9, June 2003.
Type 1\1/2\ JQ 225, Dwg., H51970, Revision 173.315.
D, April 5, 1989; or Type 1\1/2\ JQ 225,
Dwg. H50155, Revision F, April 4, 1989.
Section 3, Pamphlet 57, Emergency Shut-Off 177.840.
Systems for Bulk Transfer of Chlorine, 3rd
Edition, October 1997.
Standard Chlorine Angle Valve Assembly, Dwg. 178.337-9.
104-8, July 1993.
Excess Flow Valve with Removable Seat, Dwg. 178.337-8.
101-7, July 1993.
Excess Flow Valve with Removable Basket, 178.337-8.
Dwg. 106-6, July 1993.
Standards for Housing and Manway Covers for 178.337-10.
Steel Cargo Tanks, Dwgs. 137-1 and 137-2,
September 1, 1982.
Compressed Gas Association, Inc., 4221 Walney
Road, 5th Floor, Chantilly, Virginia 20151:
CGA Pamphlet C-3, Standards for Welding on 178.47; 178.50;
Thin-Walled Steel Cylinders, 1994. 178.51; 178.53;
178.55; 178.56;
178.57; 178.58;
178.59; 178.60;
178.61; 178.65;
178.68; 180.211.
CGA Pamphlet C-5, Cylinder Service Life-- 173.302a.
Seamless Steel High Pressure Cylinders,
1991.
CGA Pamphlet C-6, Standards for Visual 173.3, 173.198,
Inspection of Steel Compressed Gas 180.205, 180.209,
Cylinders, 1993. 180.211, 180.411,
180.519.
CGA Pamphlet C-6.1, Standards for Visual 180.205; 180.209
Inspection of High Pressure Aluminum
Compressed Gas Cylinders, 2002, Fourth
Edition.
CGA Pamphlet C-6.2, Guidelines for Visual 180.205.
Inspection and Requalification of Fiber
Reinforced High Pressure Cylinders, 1996,
Third Edition.
CGA Pamphlet C-6.3, Guidelines for Visual 180.205; 180.209.
Inspection and Requalification of Low
Pressure Aluminum Compressed Gas Cylinders,
1991.
CGA Pamphlet C-7, A Guide for the 172.400a.
Preparation of Precautionary Markings for
Compressed Gas Containers, appendix A,
issued 1992 (6th Edition).
CGA Pamphlet C-8, Standard for 180.205; 180.209.
Requalification of DOT-3HT Cylinder Design,
1985.
CGA Pamphlet C-11, Recommended Practices for 178.35.
Inspection of Compressed Gas Cylinders at
Time of Manufacture, 2001, Third Edition.
CGA Pamphlet C-12, Qualification Procedure 173.301; 173.303;
for Acetylene Cylinder Design, 1994. 178.59; 178.60.
CGA Pamphlet C-13, Guidelines for Periodic 173.303; 180.205;
Visual Inspection and Requalification of 180.209.
Acetylene Cylinders, 2000, Fourth Edition.
CGA Pamphlet C-14, Procedures for Fire 173.301; 173.323.
Testing of DOT Cylinder Pressure Relief
Device Systems, 1979.
CGA Pamphlet G-2.2 Tentative Standard Method 173.315.
for Determining Minimum of 0.2% Water in
Anhydrous Ammonia, 1985.
CGA Pamphlet G-4.1, Cleaning Equipment for 178.338-15.
Oxygen Service, 1985.
CGA Pamphlet P-20, Standard for the 173.115.
Classification of Toxic Gas Mixtures, 1995.
CGA Pamphlet S-1.1, Pressure Relief Device 173.301; 173.304a.
Standards--Part 1--Cylinders for Compressed
Gases, 2001 (with the exception of
paragraph 9.1.1.1), Ninth Edition.
CGA Pamphlet S-1.2, Safety Relief Device 173.315; 173.318;
Standards Part 2--Cargo and Portable Tanks 178.276; 178.277.
for Compressed Gases, 1980.
CGA Pamphlet S-7, Method for Selecting 173.301.
Pressure Relief Devices for Compressed Gas
Mixtures in Cylinders, 1996.
CGA Technical Bulletin TB-2, Guidelines for 180.407; 180.413.
Inspection and Repair of MC-330 and MC-331
Cargo Tanks, 1980.
Department of Defense (DOD), 2461 Eisenhower
Avenue, Alexandria, VA 22331:
DOD TB 700-2; NAVSEAINST 8020.8B; AFTO 11A-1- 173.56.
47; DLAR 8220.1: Explosives Hazard
Classification Procedures, January 1998.
Packaging of Hazardous Material, DLAD 173.7
4145.41/ AR 700-143/AFJI 24-210/NAVSUPINST
4030.55B/MCO 4030.40B, January 14, 2000.
Department of Energy (USDOE), 100 Independence
Avenue SW., Washington, DC 20545:
USDOE publications available from:
Superintendent of Documents, Government
Printing Office (GPO) or The National
Technical Information Service (NTIS).
USDOE, CAPE-1662, Revision 1, and Supplement 178.356-1; 178.356-2;
1, Civilian Application Program Engineering 178.358-1; 178.358-2;
Drawings, April 6, 1988. 178.358-3; 178.358-4.
USDOE, Material and Equipment Specification 178.356-2; 178.358-2.
No. SP-9, Rev. 1, and Supplement--Fire
Resistant Phenolic Foam, March 28, 1968.
USDOE, KSS-471, November 30, 1986--Proposal 178.358-1; 178.358-3.
for Modifications to U.S. Department of
Transportation Specification 21PF-1, Fire
and Shock Resistant Phenolic Foam--
Insulated Metal Overpack.
[[Page 87]]
General Services Administration, Specification
Office, Room 6662, 7th and D Street, S.W.,
Washington, DC 20407:
Federal Specification RR-C-901C, Cylinders, 173.302; 173.336;
Compressed Gas: High Pressure Steel DOT 173.337.
3AA, and Aluminum Applications, January 15,
1981 (Superseding RR-C-901B, August 1,
1967).
Institute of Makers of Explosives, 1120 19th
Street NW., Suite 310, Washington, DC 20036-
3605:
IME Safety Library Publication No. 22 (IME 173.63; 177.835.
Standard 22), Recommendation for the Safe
Transportation of Detonators in a Vehicle
with Certain Other Explosive Materials, May
1993.
International Atomic Energy Agency (IAEA), P.O.
Box 100, Wagramer Strasse 5, A-1400 Vienna,
Austria:
Also available from: Bernan Associates, 4611-
F Assembly Drive, Lanham, MD 20706-4391,
USA; or Renouf Publishing Company, Ltd.,
812 Proctor Avenue, Ogdensburg, New York
13669, USA.
IAEA, Regulations for the Safe Transport of 171.12, 173.415,
Radioactive Material, 1996 Edition 173.416, 173.417,
(Revised), No. TS-R-1 (ST-1, Revised). 173.473
International Civil Aviation Organization
(ICAO), P.O. Box 400, Place de l'Aviation
Internationale, 1000 Sherbrooke Street West,
Montreal, Quebec, Canada H3A 2R2:
ICAO Technical Instructions available from:
INTEREG, International Regulations,
Publishing and Distribution Organization,
P.O. Box 60105, Chicago, IL 60660.
Technical Instructions for the Safe 171.8; 171.11;
Transport of Dangerous Goods by Air (ICAO 172.202; 172.401;
Technical Instructions), 2005-2006 Edition. 172.512; 172.602;
173.320; 175.33;
178.3.
International Maritime Organization (IMO), 4
Albert Embankment, London, SE17SR, United
Kingdom or New York Nautical Instrument &
Service Corporation, 140 West Broadway, New
York, NY 10013:
International Convention for the Safety of 176.63.
Life at Sea, (SOLAS) Amendments 2000,
Chapter II-2/Regulation 19, 2001.
International Maritime Dangerous Goods Code 171.12; 172.202;
(IMDG Code), 2004 Edition, Incorporating 172.401; 172.502;
Amendment 32-04 (English Edition), Volumes 172.602; 173.21;
1 and 2. 176.2; 176.5; 176.11;
176.27; 176.30;
178.3.
International Organization for Standardization,
Case Postale 56, CH-1211, Geneve 20,
Switzerland:
Also available from: ANSI 25 West 43rd
Street, New York, NY 10036
ISO 82-74(E) Steels Tensile Testing......... 178.270-3.
ISO 535-1991(E) Paper and board-- 178.516; 178.707;
Determination of water absorptiveness--Cobb 178.708.
method.
ISO 1496--1: 1990(E)--Series 1 freight 173.411
containers--Specification and testing, Part
1: General cargo containers. Fifth Edition,
(August 15, 1990).
ISO 2431-1984(E) Standard Cup Method........ 173.121.
ISO 2592-1973(E) Petroleum products-- 173.120.
Determination of flash and fire points--
Cleveland open cup method.
ISO 2919-1980(E)--Sealed radioactive 173.469.
sources--Classification.
ISO 3036-1975(E) Board--Determination of 178.708.
puncture resistance.
ISO 3574-1986(E) Cold-reduced carbon steel 178.503; Part 178,
sheet of commercial and drawing qualities. appendix C.
ISO 4126-1 Safety valves--Part 1: General 178.274.
Requirements, December 15, 1991, First
Edition.
ISO 6892 Metallic materials--Tensile 178.274.
testing, July 15, 1984, First Edition.
ISO 8115 Cotton bales--Dimensions and 172.102.
density, 1986 Edition.
ISO 9978:1992(E)--Radiation protection-- 173.469
Sealed radioactive sources--Leakage test
methods. First Edition, (February 15, 1992).
National Board of Boiler and Pressure Vessel
Inspectors, 1055 Crupper Avenue, Columbus, Ohio
43229:
National Board Inspection Code, A Manual for 180.413.
Boiler and Pressure Vessel Inspectors, NB-
23, 1992 Edition.
National Fire Protection Association,
Batterymarch Park, Quincy, MA 02269:
NFPA 58-Liquefied Petroleum Gas Code, 2001 173.315.
Edition.
National Institute of Standards and Technology,
Department of Commerce, 5285 Port Royal Road,
Springfield, VA 22151:
USDC, NBS Handbook H-28 (1957), 1957 179.2; 178.45; 178.46.
Handbook of Screw-Thread Standards for
Federal Services, December 1966 Edition.
Organization for Economic Cooperation and
Development (OECD), OECD Publications and
Information Center, 2001 L Street, N.W., Suite
700, Washington, DC 20036:
OECD Guideline for Testing of Chemicals, No. 173.137.
404 ``Acute Dermal Irritation/Corrosion,''
1992.
Transport Canada, TDG Canadian Government
Publishing Center, Supply and Services, Canada,
Ottawa, Ontario, Canada K1A 059:
Transportation of Dangerous Goods (TDG) 171.12a; 172.401;
Regulations, August 2001 including Clear 172.502; 172.519;
Language Amendments SOR/2001-286, Amendment 172.602; 173.301.
1 (SOR/2002-306) August 8, 2002; Amendment
2 (SOR/2003-273) July 24, 2003; and
Amendment 3 (SOR/2003-400) December 3, 2003.
Truck Trailer Manufacturers Association, 1020
Princess Street, Alexandria, Virginia 22314:
TTMA RP No. 61-98, Performance of manhole 180.405.
and/or Fill Opening Assemblies on MC 306,
DOT 406, Non-ASME MC 312 and Non-ASME DOT
412 Cargo Tanks, June 1, 1998.
TTMA RP No. 81-97, Performance of Spring 178.345-10; 178.346-3.
Loaded Pressure Relief Valves on MC 306, MC
307, MC 312, DOT 406, DOT 407, and DOT 412
Tanks, July 1, 1997 Edition.
[[Page 88]]
TTMA TB No. 107, Procedure for Testing In- 180.405.
Service Unmarked and/or Uncertified MC 306
and Non-ASME MC 312 Type Cargo Tank Manhole
Covers, June 1, 1998 Edition.
United Nations, United Nations Sales Section,
New York, NY 10017:
UN Recommendations on the Transport of 171.12; 172.202;
Dangerous Goods, Thirteenth Revised Edition 172.401; 172.502;
(2003), Volumes I and II. 173.22; 173.24;
173.24b; 173.197;
Part 173, appendix H;
178.274; 178.801.
UN Recommendations on the Transport of 172.102; 173.21;
Dangerous Goods, Manual of Tests and 173.56; 173.57;
Criteria, Fourth Revised Edition, (2003). 173.58; 173.115;
173.124; 173.125;
173.127; 173.128;
173.185.
United States Enrichment Corporation, Inc.
(USEC):
USEC Inc., 6903 Rockledge Drive, Bethesda,
MD 20817.
USEC-651--Good Handling Practices for 173.417
Uranium Hexafluoride, Revision 8, January
1999.
------------------------------------------------------------------------
(b) List of informational materials not requiring incorporation by
reference. The materials listed in this paragraph do not require
approval for incorporation by reference and are included for
informational purposes. These materials may be used as noted in those
sections in which the material is referenced.
------------------------------------------------------------------------
Source and name of material 49 CFR reference
------------------------------------------------------------------------
American Biological Safety Association
1202 Allanson Road, Mundelein, IL 60060
Risk Group Classification for Infectious Agents, 173.134
1998.
American Institute of Chemical Engineers
(AIChE),
3 Park Avenue New York, NY 10016-5991
Process Safety Progress Journal, Vol. 21, No. 2.
Example of a Test Method for Venting Sizing: Note to Sec. 173.
OPPSD/SPI Methodology. 225(h)(3)(vi).
American Society for Testing and Materials, 100
Barr Harbor Drive, West Conshohocken, PA 19428:
Noncurrent ASTM Standards are available from:
Engineering Societies Library, 354 East 47th
Street, New York, NY 10017
ASTM E 380-89 Standards for Metric Practice..... 171.10
Association of American Railroads,
American Railroads Building, 50 F Street, NW.,
Washington, DC 20001
AAR Catalog Nos. SE60CHT; SE60CC; SE60CHTE; 179.14
SE60CE; SE60DC; SE60DE.
AAR Catalog Nos. SE67CC; SE67CE; SE67BHT; 179.14
SE67BC; SE67BHTE; SE67BE.
AAR Catalog Nos. SE68BHT; SE68BC; SE68BHTE; 179.14
SE68BE.
AAR Catalog Nos. SE69AHTE; SE69AE............... 179.14
AAR Catalog Nos. SF70CHT; SF70CC; SF70CHTE; 179.14
SF70CE.
AAR Catalog Nos. SF73AC; SF73AE; SF73AHT; 179.14
SF73AHTE.
AAR Catalog Nos. SF79CHT; SF79CC; SF79CHTE; 179.14
SF79CE.
Bureau of Explosives,
Hazardous Materials Systems (BOE), Association
of American Railroads, American Railroads
Building, 50 F Street, NW., Washington, DC
20001
Fetterley's Formula (The Determination of the 173.315
Relief Dimensions for Safety Valves on
Containers in which Liquefied gas is charged
and when the exterior surface of the container
is exposed to a temperature of 1,200 [deg]F.).
Pamphlet 6, Illustrating Methods for Loading and 174.55; 174.101;
Bracing Carload and Less-Than-Carload Shipments 174.112; 174.115;
of Explosives and Other Dangerous Articles, 174.290
1962.
Pamphlet 6A (includes appendix No. 1, October 174.101; 174.290
1944 and appendix 2, December 1945),
Illustrating Methods for Loading and Bracing
Carload and Less-Than-Carload Shipments of
Loaded Projectiles, Loaded Bombs, etc., 1943.
Pamphlet 6C, Illustrating Methods for Loading 174.55; 174.63;
and Bracing Trailers and Less-Than-Trailer 174.101; 174.112;
Shipments of Explosives and Other Dangerous 174.115
Articles Via Trailer-on-Flatcar (TOFC) or
Container-on-Flatcar (COFC), 1985.
Emergency Handling of Hazardous Materials in 171.7
Surface Transportation, 1989.
Centers for Disease Control and Prevention
1600 Clifton Road, Atlanta, GA 30333
Biosafety in Microbiological and Biomedical 173.134
Laboratories, Fourth Edition, April 1999.
National Institutes of Health
Bethesda, MD 20892
NIH Guidelines for Research Involving 173.134
Recombinant DNA Molecules (NIH Guidelines),
January 2001, Appendix B.
[[Page 89]]
Pantone Incorporated
590 Commerce Boulevard, Carlstadt, New Jersey
07072-3098
Pantone[reg] Formula guide coated/uncoated, 172.407, 172.519
Second Edition 2004.
Society of Plastics Industries, Inc.,
Organic Peroxide Producers Safety Division,
1275 K Street, NW., Suite 400, Washington, DC
20005
Self Accelerating Decomposition Temperature 173.21
Test, 1972.
------------------------------------------------------------------------
[Amdt. 171-111, 55 FR 52466, Dec. 21, 1990]
Editorial Note: For Federal Register citations affecting Sec.
171.7, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Editorial Note: At 68 FR 19273, Apr. 18, 2003, Sec. 171.7(a)(3) was
amended by removing the entry for ``TTMA TB No. 81'' under ``Truck
Trailer Manufacturers Association''. The amendment could not be
incorporated because that entry does not exist.
Sec. 171.8 Definitions and abbreviations.
In this subchapter,
Administrator means the Administrator, Research and Special Programs
Administration.
Aerosol means any non-refillable receptacle containing a gas
compressed, liquefied or dissolved under pressure, the sole purpose of
which is to expel a nonpoisonous (other than a Division 6.1 Packing
Group III material) liquid, paste, or powder and fitted with a self-
closing release device allowing the contents to be ejected by the gas.
Agricultural product means a hazardous material, other than a
hazardous waste, whose end use directly supports the production of an
agricultural commodity including, but not limited to a fertilizer,
pesticide, soil amendment or fuel. An agricultural product is limited to
a material in Class 3, 8 or 9, Division 2.1, 2.2, 5.1, or 6.1, or an
ORM-D material.
Approval means a written authorization, including a competent
authority approval, from the Associate Administrator or other designated
Department official, to perform a function for which prior authorization
by the Associate Administrator is required under subchapter C of this
chapter (49 CFR parts 171 through 180.)
Approved means approval issued or recognized by the Department
unless otherwise specifically indicated in this subchapter.
Asphyxiant gas means a gas which dilutes or replaces oxygen normally
in the atmosphere.
Associate Administrator means the Associate Administrator for
Hazardous Materials Safety, Pipeline and Hazardous Materials Safety
Administration.
Atmospheric gases means air, nitrogen, oxygen, argon, krypton, neon
and xenon.
Authorized Inspection Agency means: (1) A jurisdiction which has
adopted and administers one or more sections of the ASME Boiler and
Pressure Vessel Code as a legal requirement and has a representative
serving as a member of the ASME Conference Committee; or (2) an
insurance company which has been licensed or registered by the
appropriate authority of a State of the United States or a Province of
Canada to underwrite boiler and pressure vessel insurance in such State
or Province.
Authorized Inspector means an Inspector who is currently
commissioned by the National Board of Boiler and Pressure Vessel
Inspectors and employed as an Inspector by an Authorized Inspection
Agency.
Bag means a flexible packaging made of paper, plastic film,
textiles, woven material or other similar materials.
Bar means 1 BAR = 100 kPa (14.5 psi).
Barge means a non-selfpropelled vessel.
Biological product. See Sec. 173.134 of this subchapter.
Bottle means an inner packaging having a neck of relatively smaller
cross section than the body and an opening capable of holding a closure
for retention of the contents.
Bottom shell means that portion of a tank car tank surface,
excluding the head ends of the tank car tank, that
[[Page 90]]
lies within two feet, measured circumferentially, of the bottom
longitudinal center line of the tank car tank.
Box means a packaging with complete rectangular or polygonal faces,
made of metal, wood, plywood, reconstituted wood, fiberboard, plastic,
or other suitable material. Holes appropriate to the size and use of the
packaging, for purposes such as ease of handling or opening, or to meet
classification requirements, are permitted as long as they do not
compromise the integrity of the packaging during transportation, and are
not otherwise prohibited in this subchapter.
Break-bulk means packages of hazardous materials that are handled
individually, palletized, or unitized for purposes of transportation as
opposed to bulk and containerized freight.
Btu means British thermal unit.
Bulk packaging means a packaging, other than a vessel or a barge,
including a transport vehicle or freight container, in which hazardous
materials are loaded with no intermediate form of containment and which
has:
(1) A maximum capacity greater than 450 L (119 gallons) as a
receptacle for a liquid;
(2) A maximum net mass greater than 400 kg (882 pounds) and a
maximum capacity greater than 450 L (119 gallons) as a receptacle for a
solid; or
(3) A water capacity greater than 454 kg (1000 pounds) as a
receptacle for a gas as defined in Sec. 173.115 of this subchapter.
Bureau of Explosives means the Bureau of Explosives (B of E) of the
Association of American Railroads.
C means Celsius or Centigrade.
Captain of the Port (COTP) means the officer of the Coast Guard,
under the command of a District Commander, so designated by the
Commandant for the purpose of giving immediate direction to Coast Guard
law enforcement activities within an assigned area. As used in this
subchapter, the term Captain of the Port includes an authorized
representative of the Captain of the Port.
Carfloat means a vessel that operates on a short run on an irregular
basis and serves one or more points in a port area as an extension of a
rail line or highway over water, and does not operate in ocean,
coastwise, or ferry service.
Cargo aircraft only means an aircraft that is used to transport
cargo and is not engaged in carrying passengers. For purposes of this
subchapter, the terms cargo aircraft only, cargo-only aircraft and cargo
aircraft have the same meaning.
Cargo tank means a bulk packaging that:
(1) Is a tank intended primarily for the carriage of liquids or
gases and includes appurtenances, reinforcements, fittings, and closures
(for the definition of a tank, see 49 CFR 178.320, 178.337-1, or
178.338-1, as applicable);
(2) Is permanently attached to or forms a part of a motor vehicle,
or is not permanently attached to a motor vehicle but which, by reason
of its size, construction or attachment to a motor vehicle is loaded or
unloaded without being removed from the motor vehicle; and
(3) Is not fabricated under a specification for cylinders,
intermediate bulk containers, multi-unit tank car tanks, portable tanks,
or tank cars.
Cargo tank motor vehicle means a motor vehicle with one or more
cargo tanks permanently attached to or forming an integral part of the
motor vehicle.
Cargo vessel means: (1) Any vessel other than a passenger vessel;
and
(2) Any ferry being operated under authority of a change of
character certificate issued by a Coast Guard Officer-in-Charge, Marine
Inspection.
Carrier means a person who transports passengers or property in
commerce by rail car, aircraft, motor vehicle, or vessel.
CC means closed-cup.
Character of vessel means the type of service in which the vessel is
engaged at the time of carriage of a hazardous material.
Class means hazard class. See hazard class.
Class 1. See Sec. 173.50 of this subchapter.
Class 2. See Sec. 173.115 of this subchapter.
Class 3. See Sec. 173.120 of this subchapter.
Class 4. See Sec. 173.124 of this subchapter.
[[Page 91]]
Class 5. See Sec. 173.128 of this subchapter.
Class 6. See Sec. 173.132 of this subchapter.
Class 7. See Sec. 173.403 of this subchapter.
Class 8. See Sec. 173.136 of this subchapter.
Class 9. See Sec. 173.140 of this subchapter.
Closure means a device which closes an opening in a receptacle.
COFC means container-on-flat-car.
Combination packaging means a combination of packaging, for
transport purposes, consisting of one or more inner packagings secured
in a non-bulk outer packaging. It does not include a composite
packaging.
Combustible liquid. See Sec. 173.120 of this subchapter.
Commerce means trade or transportation in the jurisdiction of the
United States within a single state; between a place in a state and a
place outside of the state; or that affects trade or transportation
between a place in a state and place outside of the state.
Compatibility group letter means a designated alphabetical letter
used to categorize different types of explosive substances and articles
for purposes of stowage and segregation. See Sec. 173.52 of this
subchapter.
Competent Authority means a national agency responsible under its
national law for the control or regulation of a particular aspect of the
transportation of hazardous materials (dangerous goods). The term
Appropriate Authority, as used in the ICAO Technical Instructions (IBR,
see Sec. 171.7), has the same meaning as Competent Authority. For
purposes of this subchapter, the Associate Administrator is the
Competent Authority for the United States.
Composite packaging means a packaging consisting of an outer
packaging and an inner receptacle, so constructed that the inner
receptacle and the outer packaging form an integral packaging. Once
assembled it remains thereafter an integrated single unit; it is filled,
stored, shipped and emptied as such.
Compressed gas. See Sec. 173.115 of this subchapter.
Consignee means the person or place shown on a shipping document,
package marking, or other media as the location to which a carrier is
directed to transport a hazardous material.
Consumer commodity means a material that is packaged and distributed
in a form intended or suitable for sale through retail sales agencies or
instrumentalities for consumption by individuals for purposes of
personal care or household use. This term also includes drugs and
medicines.
Containership means a cargo vessel designed and constructed to
transport, within specifically designed cells, portable tanks and
freight containers which are lifted on and off with their contents
intact.
Corrosive material. See Sec. 173.136 of this subchapter.
Crate means an outer packaging with incomplete surfaces.
Crewmember means a person assigned to perform duty in an aircraft
during flight time.
Cryogenic liquid. See Sec. 173.115(g) of this subchapter.
Cultures and stocks. See Sec. 173.134 of this subchapter.
Cylinder means a pressure vessel designed for pressures higher than
40 psia and having a circular cross section. It does not include a
portable tank, multi-unit tank car tank, cargo tank, or tank car.
Dangerous when wet material. See Sec. 173.124 of this subchapter.
Design Certifying Engineer means a person registered with the
Department in accordance with subpart F of part 107 of this chapter who
has the knowledge and ability to perform stress analysis of pressure
vessels and otherwise determine whether a cargo tank design and
construction meets the applicable DOT specification. A Design Certifying
Engineer meets the knowledge and ability requirements of this section by
meeting any one of the following requirements:
(1) Has an engineering degree and one year of work experience in
cargo tank structural or mechanical design;
(2) Is currently registered as a professional engineer by
appropriate authority of a state of the United States or a province of
Canada; or
(3) Has at least three years' experience in performing the duties of
a Design Certifying Engineer prior to September 1, 1991.
[[Page 92]]
Designated facility means a hazardous waste treatment, storage, or
disposal facility that has been designated on the manifest by the
generator.
Diagnostic specimen. See Sec. 173.134 of this subchapter.
District Commander means the District Commander of the Coast Guard,
or his authorized representative, who has jurisdiction in the particular
geographical area.
Division means a subdivision of a hazard class.
DOD means the U.S. Department of Defense.
Domestic transportation means transportation between places within
the United States other than through a foreign country.
DOT or Department means U.S. Department of Transportation.
Drum means a flat-ended or convex-ended cylindrical packaging made
of metal, fiberboard, plastic, plywood, or other suitable materials.
This definition also includes packagings of other shapes made of metal
or plastic (e.g., round taper-necked packagings or pail-shaped
packagings) but does not include cylinders, jerricans, wooden barrels or
bulk packagings.
Elevated temperature material means a material which, when offered
for transportation or transported in a bulk packaging:
(1) Is in a liquid phase and at a temperature at or above 100 [deg]C
(212 [deg]F);
(2) Is in a liquid phase with a flash point at or above 37.8 [deg]C
(100 [deg]F) that is intentionally heated and offered for transportation
or transported at or above its flash point; or
(3) Is in a solid phase and at a temperature at or above 240 [deg]C
(464 [deg]F).
Engine means a locomotive propelled by any form of energy and used
by a railroad.
EPA means U.S. Environmental Protection Agency.
Etiologic agent. See Sec. 173.134 of this subchapter.
EX number means a number preceded by the prefix ``EX'', assigned by
the Associate Administrator, to an item that has been evaluated under
the provisions of Sec. 173.56 of this subchapter.
Exemption means a document issued by the Associate Administrator
under the authority of 49 U.S.C. 5117. The document permits a person to
perform a function that is not otherwise permitted under subchapter A or
C of this chapter, or other regulations issued under 49 U.S.C. 5101
through 5127 (e.g., Federal Motor Carrier Safety routing).
Explosive. See Sec. 173.50 of this subchapter.
F means degree Fahrenheit.
Farmer means a person engaged in the production or raising of crops,
poultry, or livestock.
Federal hazardous material transportation law means 49 U.S.C. 5101
et seq.
Ferry vessel means a vessel which is limited in its use to the
carriage of deck passengers or vehicles or both, operates on a short run
on a frequent schedule between two points over the most direct water
route, other than in ocean or coastwise service, and is offered as a
public service of a type normally attributed to a bridge or tunnel.
Filling density has the following meanings:
(1) For compressed gases in cylinders, see Sec. 173.304a(a)(2)
table note 1.
(2) For compressed gases in tank cars, see Sec. 173.314(c) table
note 1.
(3) For compressed gases in cargo tanks and portable tanks, see
Sec. 173.315(a) table note 1.
(4) For cryogenic liquids in cylinders, except hydrogen, see Sec.
173.316(c)(1).
(5) For hydrogen, cryogenic liquid in cylinders, see Sec.
173.316(c)(3) table note 1.
(6) For cryogenic liquids in cargo tanks, see Sec. 173.318(f)(1).
(7) For cryogenic liquids in tank cars, see Sec. 173.319(d)(1).
Flammable gas. See Sec. 173.115 of this subchapter.
Flammable liquid. See Sec. 173.120 of this subchapter.
Flammable solid. See Sec. 173.124 of this subchapter.
Flash point. See Sec. 173.120 of this subchapter.
Freight container means a reusable container having a volume of 64
cubic feet or more, designed and constructed to permit being lifted with
its contents intact and intended primarily for containment of packages
(in unit form) during transportation.
[[Page 93]]
Fuel tank means a tank other than a cargo tank, used to transport
flammable or combustible liquid, or compressed gas for the purpose of
supplying fuel for propulsion of the transport vehicle to which it is
attached, or for the operation of other equipment on the transport
vehicle.
Fumigated lading. See Sec. Sec. 172.302(g) and 173.9.
Gas means a material which has a vapor pressure greater than 300 kPa
(43.5 psia) at 50 [deg]C (122 [deg]F) or is completely gaseous at 20
[deg]C (68 [deg]F) at a standard pressure of 101.3 kPa (14.7 psia).
Gross weight or Gross mass means the weight of a packaging plus the
weight of its contents.
Hazard class means the category of hazard assigned to a hazardous
material under the definitional criteria of part 173 of this subchapter
and the provisions of the Sec. 172.101 table. A material may meet the
defining criteria for more than one hazard class but is assigned to only
one hazard class.
Hazard zone means one of four levels of hazard (Hazard Zones A
through D) assigned to gases, as specified in Sec. 173.116(a) of this
subchapter, and one of two levels of hazards (Hazard Zones A and B)
assigned to liquids that are poisonous by inhalation, as specified in
Sec. 173.133(a) of this subchapter. A hazard zone is based on the LC50
value for acute inhalation toxicity of gases and vapors, as specified in
Sec. 173.133(a).
Hazardous material means a substance or material that the Secretary
of Transportation has determined is capable of posing an unreasonable
risk to health, safety, and property when transported in commerce, and
has designated as hazardous under section 5103 of Federal hazardous
materials transportation law (49 U.S.C. 5103). The term includes
hazardous substances, hazardous wastes, marine pollutants, elevated
temperature materials, materials designated as hazardous in the
Hazardous Materials Table (see 49 CFR 172.101), and materials that meet
the defining criteria for hazard classes and divisions in part 173 of
subchapter C of this chapter.
Hazardous substance for the purposes of this subchapter, means a
material, including its mixtures and solutions, that--
(1) Is listed in the appendix A to Sec. 172.101 of this subchapter;
(2) Is in a quantity, in one package, which equals or exceeds the
reportable quantity (RQ) listed in the appendix A to Sec. 172.101 of
this subchapter; and
(3) When in a mixture or solution--
(i) For radionuclides, conforms to paragraph 7 of the appendix A to
Sec. 172.101.
(ii) For other than radionuclides, is in a concentration by weight
which equals or exceeds the concentration corresponding to the RQ of the
material, as shown in the following table:
------------------------------------------------------------------------
Concentration by
weight
RQ pounds (kilograms) ---------------------
Percent PPM
------------------------------------------------------------------------
5000 (2270)....................................... 10 100,000
1000 (454)........................................ 2 20,000
100 (45.4)........................................ 0.2 2,000
10 (4.54)......................................... 0.02 200
1 (0.454)......................................... 0.002 20
------------------------------------------------------------------------
The term does not include petroleum, including crude oil or any
fraction thereof which is not otherwise specifically listed or
designated as a hazardous substance in appendix A to Sec. 172.101 of
this subchapter, and the term does not include natural gas, natural gas
liquids, liquefied natural gas, or synthetic gas usable for fuel (or
mixtures of natural gas and such synthetic gas).
Hazardous waste, for the purposes of this chapter, means any
material that is subject to the Hazardous Waste Manifest Requirements of
the U.S. Environmental Protection Agency specified in 40 CFR part 262.
Hazmat means a hazardous material.
Hazmat employee means a person who is employed by a hazmat employer
and who in the course of employment directly affects hazardous materials
transportation safety. This term includes an owner-operator of a motor
vehicle which transports hazardous materials in commerce. This term
includes an individual, including a self-employed individual, employed
by a hazmat employer who, during the course of employment:
(1) Loads, unloads, or handles hazardous materials;
[[Page 94]]
(2) Manufactures, tests, reconditions, repairs, modifies, marks, or
otherwise represents containers, drums, or packagings as qualified for
use in the transportation of hazardous materials;
(3) Prepares hazardous materials for transportation;
(4) Is responsible for safety of transporting hazardous materials;
or
(5) Operates a vehicle used to transport hazardous materials.
Hazmat employer means a person who uses one or more of its employees
in connection with: transporting hazardous materials in commerce;
causing hazardous materials to be transported or shipped in commerce; or
representing, marking, certifying, selling, offering, manufacturing,
reconditioning, testing, repairing, or modifying containers, drums, or
packagings as qualified for use in the transportation of hazardous
materials. This term includes an owner-operator of a motor vehicle which
transports hazardous materials in commerce. This term also includes any
department, agency, or instrumentality of the United States, a State, a
political subdivision of a State, or an Indian tribe engaged in an
activity described in the first sentence of this definition.
Hermetically sealed means closed by fusion, gasketing, crimping, or
equivalent means so that no gas or vapor can enter or escape.
HMR means the Hazardous Materials Regulations, Parts 171 through 180
of this chapter.
IAEA means International Atomic Energy Agency.
IATA means International Air Transport Association.
ICAO means International Civil Aviation Organization.
IMO means International Maritime Organization.
Incorporated by reference or IBR means a publication or a portion of
a publication that is made a part of the regulations of this subchapter.
See Sec. 171.7.
Infectious substance (etiologic agent). See Sec. 173.134 of this
subchapter.
Inner packaging means a packaging for which an outer packaging is
required for transport. It does not include the inner receptacle of a
composite packaging.
Inner receptacle means a receptacle which requires an outer
packaging in order to perform its containment function. The inner
receptacle may be an inner packaging of a combination packaging or the
inner receptacle of a composite packaging.
Intermediate bulk container or IBC means a rigid or flexible
portable packaging, other than a cylinder or portable tank, which is
designed for mechanical handling. Standards for IBCs manufactured in the
United States are set forth in subparts N and O of part 178 of this
subchapter.
Intermediate packaging means a packaging which encloses an inner
packaging or article and is itself enclosed in an outer packaging.
Intermodal container means a freight container designed and
constructed to permit it to be used interchangeably in two or more modes
of transport.
Intermodal portable tank or IM portable tank means a specific class
of portable tanks designed primarily for international intermodal use.
International transportation means transportation--
(1) Between any place in the United States and any place in a
foreign country;
(2) Between places in the United States through a foreign country;
or
(3) Between places in one or more foreign countries through the
United States.
Irritating material. See Sec. 173.132(a)(2) of this subchapter.
Jerrican means a metal or plastic packaging of rectangular or
polygonal cross-section.
Large packaging means a packaging that--
(1) Consists of an outer packaging which contains articles or inner
packagings;
(2) Is designated for mechanical handling;
(3) Exceeds 400 kg net mass or 450 liters (118.9 gallons) capacity;
(4) Has a volume of not more than 3 m\3\ (see Sec. 178.801(i) of
this subchapter); and
(5) Conforms to the requirements for the construction, testing and
marking of large packagings as specified in the UN Recommendations,
Chapter 6.6 (incorporated by reference; see Sec. 171.7).
[[Page 95]]
Limited quantity, when specified as such in a section applicable to
a particular material, means the maximum amount of a hazardous material
for which there is a specific labeling or packaging exception.
Liquid means a material, other than an elevated temperature
material, with a melting point or initial melting point of 20 [deg]C (68
[deg]F) or lower at a standard pressure of 101.3 kPa (14.7 psia). A
viscous material for which a specific melting point cannot be determined
must be subjected to the procedures specified in ASTM D 4359 ``Standard
Test Method for Determining Whether a Material is Liquid or Solid''
(IBR, see Sec. 171.7).
Liquid phase means a material that meets the definition of liquid
when evaluated at the higher of the temperature at which it is offered
for transportation or at which it is transported, not at the 37.8 [deg]C
(100 [deg]F) temperature specified in ASTM D 4359 (IBR, see Sec.
171.7).
Loading incidental to movement means loading by carrier personnel or
in the presence of carrier personnel of packaged or containerized
hazardous material onto a transport vehicle, aircraft, or vessel for the
purpose of transporting it, including the loading, blocking and bracing
a hazardous materials package in a freight container or transport
vehicle, and segregating a hazardous materials package in a freight
container or transport vehicle from incompatible cargo. For a bulk
packaging, loading incidental to movement means filling the packaging
with a hazardous material for the purpose of transporting it. Loading
incidental to movement includes transloading.
Magazine vessel means a vessel used for the receiving, storing, or
dispensing of explosives.
Magnetic material. See Sec. 173.21(d) of this subchapter.
Marine pollutant, means a material which is listed in appendix B to
Sec. 172.101 of this subchapter (also see Sec. 171.4) and, when in a
solution or mixture of one or more marine pollutants, is packaged in a
concentration which equals or exceeds:
(1) Ten percent by weight of the solution or mixture for materials
listed in the appendix; or
(2) One percent by weight of the solution or mixture for materials
that are identified as severe marine pollutants in the appendix.
Marking means a descriptive name, identification number,
instructions, cautions, weight, specification, or UN marks, or
combinations thereof, required by this subchapter on outer packagings of
hazardous materials.
Material of trade means a hazardous material, other than a hazardous
waste, that is carried on a motor vehicle--
(1) For the purpose of protecting the health and safety of the motor
vehicle operator or passengers;
(2) For the purpose of supporting the operation or maintenance of a
motor vehicle (including its auxiliary equipment); or
(3) By a private motor carrier (including vehicles operated by a
rail carrier) in direct support of a principal business that is other
than transportation by motor vehicle.
Material poisonous by inhalation means:
(1) A gas meeting the defining criteria in Sec. 173.115(c) of this
subchapter and assigned to Hazard Zone A, B, C, or D in accordance with
Sec. 173.116(a) of this subchapter;
(2) A liquid (other than as a mist) meeting the defining criteria in
Sec. 173.132(a)(1)(iii) of this subchapter and assigned to Hazard Zone
A or B in accordance with Sec. 173.133(a) of this subchapter; or
(3) Any material identified as an inhalation hazard by a special
provision in column 7 of the Sec. 172.101 table.
Maximum allowable working pressure or MAWP: For DOT specification
cargo tanks used to transport liquid hazardous materials, see Sec.
178.320(a) of this subchapter.
Maximum capacity means the maximum inner volume of receptacles or
packagings.
Maximum net mass means the allowable maximum net mass of contents in
a single packaging, or as used in subpart M of part 178 of this
subchapter, the maximum combined mass of inner packaging, and the
contents thereof.
Metered delivery service means a cargo tank unloading operation
conducted at
[[Page 96]]
a metered flow rate of 378.5 L (100 gallons) per minute or less through
an attached delivery hose with a nominal inside diameter of 3.175 cm
(1\1/4\ inches) or less.
Miscellaneous hazardous material. See Sec. 173.140 of this
subchapter.
Mixture means a material composed of more than one chemical compound
or element.
Mode means any of the following transportation methods; rail,
highway, air, or water.
Motor vehicle includes a vehicle, machine, tractor, trailer, or
semitrailer, or any combination thereof, propelled or drawn by
mechanical power and used upon the highways in the transportation of
passengers or property. It does not include a vehicle, locomotive, or
car operated exclusively on a rail or rails, or a trolley bus operated
by electric power derived from a fixed overhead wire, furnishing local
passenger transportation similar to street-railway service.
Movement means the physical transfer of a hazardous material from
one geographic location to another by rail car, aircraft, motor vehicle,
or vessel.
Name of contents means the proper shipping name as specified in
Sec. 172.101 of this subchapter.
Navigable waters means, for the purposes of this subchapter, waters
of the United States, including the territorial seas.
Non-bulk packaging means a packaging which has:
(1) A maximum capacity of 450 L (119 gallons) or less as a
receptacle for a liquid;
(2) A maximum net mass of 400 kg (882 pounds) or less and a maximum
capacity of 450 L (119 gallons) or less as a receptacle for a solid; or
(3) A water capacity of 454 kg (1000 pounds) or less as a receptacle
for a gas as defined in Sec. 173.115 of this subchapter.
Nonflammable gas. See Sec. 173.115 of this subchapter.
N.O.S. means not otherwise specified.
N.O.S. description means a shipping description from the Sec.
172.101 table which includes the abbreviation n.o.s.
NPT means an American Standard taper pipe thread conforming to the
requirements of NBS Handbook H-28 (IBR, see Sec. 171.7).
NRC (non-reusable container) means a packaging (container) whose
reuse is restricted in accordance with the provisions of Sec. 173.28 of
this subchapter.
Occupied caboose means a rail car being used to transport non-
passenger personnel.
Officer in Charge, Marine Inspection means a person from the
civilian or military branch of the Coast Guard designated as such by the
Commandant and who under the supervision and direction of the Coast
Guard District Commander is in charge of a designated inspection zone
for the performance of duties with respect to the enforcement and
administration of title 52, Revised Statutes, acts amendatory thereof or
supplemental thereto, rules and regulations thereunder, and the
inspection required thereby.
Offshore supply vessel means a cargo vessel of less than 500 gross
tons that regularly transports goods, supplies or equipment in support
of exploration or production of offshore mineral or energy resources.
Operator means a person who controls the use of an aircraft, vessel,
or vehicle.
Organic peroxide. See Sec. 173.128 of this subchapter.
ORM means other regulated material. See Sec. 173.144 of this
subchapter.
Outage or ullage means the amount by which a packaging falls short
of being liquid full, usually expressed in percent by volume.
Outer packaging means the outermost enclosure of a composite or
combination packaging together with any absorbent materials, cushioning
and any other components necessary to contain and protect inner
receptacles or inner packagings.
Overpack, except as provided in subpart K of part 178 of this
subchapter, means an enclosure that is used by a single consignor to
provide protection or convenience in handling of a package or to
consolidate two or more packages. Overpack does not include a transport
vehicle, freight container, or aircraft unit load device. Examples of
overpacks are one or more packages:
(1) Placed or stacked onto a load board such as a pallet and secured
by
[[Page 97]]
strapping, shrink wrapping, stretch wrapping, or other suitable means;
or
(2) Placed in a protective outer packaging such as a box or crate.
Oxidizer. See Sec. 173.127 of this subchapter.
Oxidizing gas means a gas which may, generally by providing oxygen,
cause or contribute to the combustion of other material more than air
does.
Oxygen generator (chemical) means a device containing chemicals that
upon activation release oxygen as a product of chemical reaction.
Package or Outside Package means a packaging plus its contents. For
radioactive materials, see Sec. 173.403 of this subchapter.
Packaging means a receptacle and any other components or materials
necessary for the receptacle to perform its containment function in
conformance with the minimum packing requirements of this subchapter.
For radioactive materials packaging, see Sec. 173.403 of this
subchapter.
Packing group means a grouping according to the degree of danger
presented by hazardous materials. Packing Group I indicates great
danger; Packing Group II, medium danger; Packing Group III, minor
danger. See Sec. 172.101(f) of this subchapter.
Passenger (With respect to vessels and for the purposes of part 176
only) means a person being carried on a vessel other than:
(1) The owner or his representative;
(2) The operator;
(3) A bona fide member of the crew engaged in the business of the
vessel who has contributed no consideration for his carriage and who is
paid for his services; or
(4) A guest who has not contributed any consideration directly or
indirectly for his carriage.
Passenger-carrying aircraft means an aircraft that carries any
person other than a crewmember, company employee, an authorized
representative of the United States, or a person accompanying the
shipment.
Passenger vessel means--
(1) A vessel subject to any of the requirements of the International
Convention for the Safety of Life at Sea, 1974, which carries more than
12 passengers;
(2) A cargo vessel documented under the laws of the United States
and not subject to that Convention, which carries more than 16
passengers;
(3) A cargo vessel of any foreign nation that extends reciprocal
privileges and is not subject to that Convention and which carries more
than 16 passengers; and
(4) A vessel engaged in a ferry operation and which carries
passengers.
Person means an individual, corporation, company, association, firm,
partnership, society, joint stock company; or a government, Indian
tribe, or authority of a government or tribe offering a hazardous
material for transportation in commerce or transporting a hazardous
material to support a commercial enterprise. This term does not include
the United States Postal Service or, for purposes of 49 U.S.C. 5123 and
5124, a Department, agency, or instrumentality of the government.
Person who offers or offeror means:
(1) Any person who does either or both of the following:
(i) Performs, or is responsible for performing, any pre-
transportation function required under this subchapter for
transportation of the hazardous material in commerce.
(ii) Tenders or makes the hazardous material available to a carrier
for transportation in commerce.
(2) A carrier is not an offeror when it performs a function required
by this subchapter as a condition of acceptance of a hazardous material
for transportation in commerce (e.g., reviewing shipping papers,
examining packages to ensure that they are in conformance with this
subchapter, or preparing shipping documentation for its own use) or when
it transfers a hazardous material to another carrier for continued
transportation in commerce without performing a pre-transportation
function.
PHMSA means the Pipeline and Hazardous Materials Safety
Administration, U.S. Department of Transportation, Washington, DC 20590.
Placarded car means a rail car which is placarded in accordance with
the requirements of part 172 of this subchapter.
Poisonous gas. See Sec. 173.115 of this subchapter.
[[Page 98]]
Poisonous materials. See Sec. 173.132 of this subchapter.
Portable tank means a bulk packaging (except a cylinder having a
water capacity of 1000 pounds or less) designed primarily to be loaded
onto, or on, or temporarily attached to a transport vehicle or ship and
equipped with skids, mountings, or accessories to facilitate handling of
the tank by mechanical means. It does not include a cargo tank, tank
car, multi-unit tank car tank, or trailer carrying 3AX, 3AAX, or 3T
cylinders.
Preferred route or Preferred highway is a highway for shipment of
highway route controlled quantities of radioactive materials so
designated by a State routing agency, and any Interstate System highway
for which an alternative highway has not been designated by such State
agency as provided by Sec. 397.103 of this title.
Pre-transportation function means a function specified in the HMR
that is required to assure the safe transportation of a hazardous
material in commerce, including--
(1) Determining the hazard class of a hazardous material.
(2) Selecting a hazardous materials packaging.
(3) Filling a hazardous materials packaging, including a bulk
packaging.
(4) Securing a closure on a filled or partially filled hazardous
materials package or container or on a package or container containing a
residue of a hazardous material.
(5) Marking a package to indicate that it contains a hazardous
material.
(6) Labeling a package to indicate that it contains a hazardous
material.
(7) Preparing a shipping paper.
(8) Providing and maintaining emergency response information.
(9) Reviewing a shipping paper to verify compliance with the HMR or
international equivalents.
(10) For each person importing a hazardous material into the United
States, providing the shipper with timely and complete information as to
the HMR requirements that will apply to the transportation of the
material within the United States.
(11) Certifying that a hazardous material is in proper condition for
transportation in conformance with the requirements of the HMR.
(12) Loading, blocking, and bracing a hazardous materials package in
a freight container or transport vehicle.
(13) Segregating a hazardous materials package in a freight
container or transport vehicle from incompatible cargo.
(14) Selecting, providing, or affixing placards for a freight
container or transport vehicle to indicate that it contains a hazardous
material.
Primary hazard means the hazard class of a material as assigned in
the Sec. 172.101 table.
Private track or Private siding means: (i) Track located outside of
a carrier's right-of-way, yard, or terminals where the carrier does not
own the rails, ties, roadbed, or right-of-way, or
(ii) Track leased by a railroad to a lessee, where the lease
provides for, and actual practice entails, exclusive use of that
trackage by the lessee and/or a general system railroad for purpose of
moving only cars shipped to or by the lessee, and where the lessor
otherwise exercises no control over or responsibility for the trackage
or the cars on the trackage.
Proper shipping name means the name of the hazardous material shown
in Roman print (not italics) in Sec. 172.101 of this subchapter.
Psi means pounds per square inch.
Psia means pounds per square inch absolute.
Psig means pounds per square inch gauge.
Public vessel means a vessel owned by and being used in the public
service of the United States. It does not include a vessel owned by the
United States and engaged in a trade or commercial service or a vessel
under contract or charter to the United States.
Pyrophoric liquid. See Sec. 173.124(b) of this subchapter.
Radioactive materials. See Sec. 173.403 of this subchapter for
definitions relating to radioactive materials.
Rail car means a car designed to carry freight or non-passenger
personnel by rail, and includes a box car, flat car, gondola car, hopper
car, tank car, and occupied caboose.
Railroad means a person engaged in transportation by rail.
[[Page 99]]
Receptacle means a containment vessel for receiving and holding
materials, including any means of closing.
Registered Inspector means a person registered with the Department
in accordance with subpart F of part 107 of this chapter who has the
knowledge and ability to determine whether a cargo tank conforms to the
applicable DOT specification. A Registered Inspector meets the knowledge
and ability requirements of this section by meeting any one of the
following requirements:
(1) Has an engineering degree and one year of work experience
relating to the testing and inspection of cargo tanks;
(2) Has an associate degree in engineering and two years of work
experience relating to the testing and inspection of cargo tanks;
(3) Has a high school diploma (or General Equivalency Diploma) and
three years of work experience relating to the testing and inspection of
cargo tanks; or
(4) Has at least three years' experience performing the duties of a
Registered Inspector prior to September 1, 1991.
Regulated medical waste. See Sec. 173.134 of this subchapter.
Reportable quantity (RQ) for the purposes of this subchapter means
the quantity specified in column 2 of the appendix to Sec. 172.101 for
any material identified in column 1 of the appendix.
Research means investigation or experimentation aimed at the
discovery of new theories or laws and the discovery and interpretation
of facts or revision of accepted theories or laws in the light of new
facts.
Residue means the hazardous material remaining in a packaging,
including a tank car, after its contents have been unloaded to the
maximum extent practicable and before the packaging is either refilled
or cleaned of hazardous material and purged to remove any hazardous
vapors.
Risk group. See Sec. 173.134 of this subchapter.
SADT means self-accelerated decomposition temperature. See Sec.
173.21(f) of this subchapter.
Salvage packaging means a special packaging conforming to Sec.
173.3 of this subchapter into which damaged, defective, leaking, or non-
conforming hazardous materials packages, or hazardous materials that
have spilled or leaked, are placed for purposes of transport for
recovery or disposal.
SCF (standard cubic foot) means one cubic foot of gas measured at 60
[deg]F. and 14.7 psia.
Secretary means the Secretary of Transportation.
Self-defense spray means an aerosol or non-pressurized device that:
(1) Is intended to have an irritating or incapacitating effect on a
person or animal; and
(2) Meets no hazard criteria other than for Class 9 (for example, a
pepper spray; see Sec. 173.140(a) of this subchapter) and, for an
aerosol, Division 2.1 or 2.2 (see Sec. 173.115 of this subchapter),
except that it may contain not more than two percent by mass of a tear
gas substance (e.g., chloroacetophenone (CN) or 0-
chlorobenzylmalonitrile (CS); see Sec. 173.132(a)(2) of this
subchapter.)
Sharps. See Sec. 173.134 of this subchapter.
Shipping paper means a shipping order, bill of lading, manifest or
other shipping document serving a similar purpose and containing the
information required by Sec. Sec. 172.202, 172.203 and 172.204.
Siftproof packaging means a packaging impermeable to dry contents,
including fine solid material produced during transportation.
Single packaging means a non-bulk packaging other than a combination
packaging.
Solid means a material which is not a gas or a liquid.
Solution means any homogeneous liquid mixture of two or more
chemical compounds or elements that will not undergo any segregation
under conditions normal to transportation.
Specification packaging means a packaging conforming to one of the
specifications or standards for packagings in part 178 or part 179 of
this subchapter.
Spontaneously combustible material. See Sec. 173.124(b) of this
subchapter.
Stabilized means that the hazardous material is in a condition that
precludes uncontrolled reaction. This may be achieved by methods such as
adding an inhibiting chemical, degassing the
[[Page 100]]
hazardous material to remove dissolved oxygen and inerting the air space
in the package, or maintaining the hazardous material under temperature
control.
State means a State of the United States, the District of Columbia,
the Commonwealth of Puerto Rico, the Commonwealth of the Northern
Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other
territory or possession of the United States designated by the
Secretary.
State-designated route means a preferred route selected in
accordance with U.S. DOT ``Guidelines for Selecting Preferred Highway
Routes for Highway Route Controlled Quantities of Radioactive
Materials'' or an equivalent routing analysis which adequately considers
overall risk to the public.
Storage incidental to movement means storage of a transport vehicle,
freight container, or package containing a hazardous material by any
person between the time that a carrier takes physical possession of the
hazardous material for the purpose of transporting it in commerce until
the package containing the hazardous material is physically delivered to
the destination indicated on a shipping document, package marking, or
other medium, or, in the case of a private motor carrier, between the
time that a motor vehicle driver takes physical possession of the
hazardous material for the purpose of transporting it in commerce until
the driver relinquishes possession of the package at its destination and
is no longer responsible for performing functions subject to the HMR
with respect to that particular package.
(1) Storage incidental to movement includes--
(i) Storage at the destination shown on a shipping document,
including storage at a transloading facility, provided the shipping
documentation identifies the shipment as a through-shipment and
identifies the final destination or destinations of the hazardous
material; and
(ii) Rail cars containing hazardous materials that are stored on
track that does not meet the definition of ``private track or siding''
in Sec. 171.8, even if those cars have been delivered to the
destination shown on the shipping document.
(2) Storage incidental to movement does not include storage of a
hazardous material at its final destination as shown on a shipping
document.
Stowage means the act of placing hazardous materials on board a
vessel.
Strong outside container means the outermost enclosure which
provides protection against the unintentional release of its contents
under conditions normally incident to transportation.
Subsidiary hazard means a hazard of a material other than the
primary hazard. (See primary hazard).
Table in Sec. 172.101 or Sec. 172.101 table means the Hazardous
Materials Table in Sec. 172.101 of this subchapter.
Technical name means a recognized chemical name or microbiological
name currently used in scientific and technical handbooks, journals, and
texts. Generic descriptions are authorized for use as technical names
provided they readily identify the general chemical group, or
microbiological group. Examples of acceptable generic chemical
descriptions are organic phosphate compounds, petroleum aliphatic
hydrocarbons and tertiary amines. For proficiency testing only, generic
microbiological descriptions such as bacteria, mycobacteria, fungus, and
viral samples may be used. Except for names which appear in subpart B of
part 172 of this subchapter, trade names may not be used as technical
names.
TOFC means trailer-on-flat-car.
Top shell means the tank car tank surface, excluding the head ends
and bottom shell of the tank car tank.
Toxin. See Sec. 173.134 of this subchapter.
Trailership means a vessel, other than a carfloat, specifically
equipped to carry motor transport vehicles and fitted with installed
securing devices to tie down each vehicle. The term trailership includes
Roll-on/Roll-off (RO/RO) vessels.
Train means one or more engines coupled with one or more rail cars,
except during switching operations or where the operation is that of
classifying and assembling rail cars within a railroad yard for the
purpose of making or breaking up trains.
[[Page 101]]
Trainship means a vessel other than a rail car ferry or carfloat,
specifically equipped to transport railroad vehicles, and fitted with
installed securing devices to tie down each vehicle.
Transloading means the transfer of a hazardous material by any
person from one bulk packaging to another bulk packaging, from a bulk
packaging to a non-bulk packaging, or from a non-bulk packaging to a
bulk packaging for the purpose of continuing the movement of the
hazardous material in commerce.
Transport vehicle means a cargo-carrying vehicle such as an
automobile, van, tractor, truck, semitrailer, tank car or rail car used
for the transportation of cargo by any mode. Each cargo-carrying body
(trailer, rail car, etc.) is a separate transport vehicle.
Transportation or transport means the movement of property and
loading, unloading, or storage incidental to that movement.
UFC means Uniform Freight Classification.
UN means United Nations.
UN portable tank means a intermodal tank having a capacity of more
than 450 liters (118.9 gallons). It includes a shell fitted with service
equipment and structural equipment, including stabilizing members
external to the shell and skids, mountings or accessories to facilitate
mechanical handling. A UN portable tank must be capable of being filled
and discharged without the removal of its structural equipment and must
be capable of being lifted when full. Cargo tanks, rail tank car tanks,
non-metallic tanks, non-specification tanks, bulk bins, and IBCs and
packagings made to cylinder specifications are not UN portable tanks.
UN Recommendations means the UN Recommendations on the Transport of
Dangerous Goods (IBR, see Sec. 171.7).
UN standard packaging means a packaging conforming to standards in
the UN Recommendations (IBR, see Sec. 171.7).
Undeclared hazardous material means a hazardous material that is:
(1) Subject to any of the hazard communication requirements in subparts
C (Shipping Papers), D (Marking), E (Labeling), and F (Placarding) of
Part 172 of this subchapter, or an alternative marking requirement in
Part 173 of this subchapter (such as Sec. Sec. 173.4(a)(10) and
173.6(c)); and (2) offered for transportation in commerce without any
visible indication to the person accepting the hazardous material for
transportation that a hazardous material is present, on either an
accompanying shipping document, or the outside of a transport vehicle,
freight container, or package.
Unintentional release means the escape of a hazardous material from
a package on an occasion not anticipated or planned. This includes
releases resulting from collision, package failures, human error,
criminal activity, negligence, improper packing, or unusual conditions
such as the operation of pressure relief devices as a result of over-
pressurization, overfill or fire exposure. It does not include releases,
such as venting of packages, where allowed, and the operational
discharge of contents from packages.
Unit load device means any type of freight container, aircraft
container, aircraft pallet with a net, or aircraft pallet with a net
over an igloo.
United States means a State of the United States, the District of
Columbia, the Commonwealth of Puerto Rico, the Commonwealth of the
Northern Mariana Islands, the Virgin Islands, American Samoa, Guam, or
any other territory or possession of the United States designated by the
Secretary.
Unloading incidental to movement means removing a packaged or
containerized hazardous material from a transport vehicle, aircraft, or
vessel, or for a bulk packaging, emptying a hazardous material from the
bulk packaging after the hazardous material has been delivered to the
consignee when performed by carrier personnel or in the presence of
carrier personnel or, in the case of a private motor carrier, while the
driver of the motor vehicle from which the hazardous material is being
unloaded immediately after movement is completed is present during the
unloading operation. (Emptying a hazardous material from a bulk
packaging while the packaging is on board a vessel is subject to
separate regulations as delegated by Department of Homeland Security
Delegation
[[Page 102]]
No. 0170.1 at 2(103).) Unloading incidental to movement includes
transloading.
Vessel includes every description of watercraft, used or capable of
being used as a means of transportation on the water.
Viscous liquid means a liquid material which has a measured
viscosity in excess of 2500 centistokes at 25 [deg]C. (77 [deg]F.) when
determined in accordance with the procedures specified in ASTM Method D
445-72 ``Kinematic Viscosity of Transparent and Opaque Liquids (and the
Calculation of Dynamic Viscosity)'' or ASTM Method D 1200-70 ``Viscosity
of Paints, Varnishes, and Lacquers by Ford Viscosity Cup.''
Volatility refers to the relative rate of evaporation of materials
to assume the vapor state.
Water reactive material. See Sec. 173.124(c) of this subchapter.
Water resistant means having a degree of resistance to permeability
by and damage caused by water in liquid form.
Wooden barrel means a packaging made of natural wood, of round
cross-section, having convex walls, consisting of staves and heads and
fitted with hoops.
W.T. means watertight.
[Amdt. 171-32, 41 FR 15994, Apr. 15, 1976]
Editorial Note: For Federal Register citations affecting Sec.
171.8, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 171.9 Rules of construction.
(a) In this subchapter, unless the context requires otherwise:
(1) Words imparting the singular include the plural;
(2) Words imparting the plural include the singular; and
(3) Words imparting the masculine gender include the feminine;
(b) In this subchapter, the word: (1) ``Shall'' is used in an
imperative sense;
(2) ``Must'' is used in an imperative sense;
(3) ``Should'' is used in a recommendatory sense;
(4) ``May'' is used in a permissive sense to state authority or
permission to do the act described, and the words ``no person may * *
*'' or ``a person may not * * *'' means that no person is required,
authorized, or permitted to do the act described; and
(5) ``Includes'' is used as a word of inclusion not limitation.
[Amdt. 171-32, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 171-32A,
41 FR 40630, Sept. 20, 1976; Amdt. 171-121, 58 FR 51528, Oct. 1, 1993]
Sec. 171.10 Units of measure.
(a) General. To ensure compatibility with international
transportation standards, most units of measure in this subchapter are
expressed using the International System of Units (``SI'' or metric).
Where SI units appear, they are the regulatory standard. U.S. standard
or customary units, which appear in parentheses following the SI units,
are for information only and are not intended to be the regulatory
standard.
(b) Abbreviations for SI units of measure generally used throughout
this subchapter are as shown in paragraph (c) of this section. Customary
units shown throughout this subchapter are generally not abbreviated.
(c) Conversion values. (1) Conversion values are provided in the
following table and are based on values provided in ASTM E 380,
``Standard for Metric Practice''.
(2) If an exact conversion is needed, the following conversion table
should be used.
Table of Conversion Factors for SI Units
----------------------------------------------------------------------------------------------------------------
Measurement SI to U.S. standard U.S. standard to SI
----------------------------------------------------------------------------------------------------------------
Activity........................... 1 TBq=27 Ci................ 1 Ci=0.037 TBq
Length............................. 1 cm=0.3937008 in.......... 1 in=2.540000 cm
1 m=3.280840 ft............ 1 ft=0.3048000 m
Thickness.......................... 1 mm=0.03937008 in......... 1 in=25.40000 mm
Mass (weight)...................... 1 kg=2.204622 lb........... 1 lb=0.4535924 kg
1 g=0.03527397 oz.......... 1 oz=28.34952 g
Pressure........................... 1 kPa=0.1450377 psi........ 1 psi=6.894757 kPa
1 Bar=100 kPa=14.504 psi... 1 psi=0.06895 Bar
1 kPa=7.5 mm Hg............
[[Page 103]]
Radiation level.................... 1 Sv/hr=100 rem/hr......... 1 rem/hr=0.01 Sv/hr
Volume (liquid).................... 1 L=0.2641720 gal.......... 1 gal=3.785412 L
1 mL=0.03381402 oz......... 1 oz=29.57353 mL
1 m\3\=35.31466 ft\3\...... 1 ft\3\=0.02831685 m\3\
Density............................ 1 kg/m\3\=0.06242797 lb/ 1 lb/ft\3\=16.01846 kg/m\3\
ft\3\.
Force.............................. 1 Newton = 0.2248 Pound- 1 Pound-force=4.483 N
force.
----------------------------------------------------------------------------------------------------------------
Abbreviation for units of measure are as follows:
Unit of measure and abbreviation:
(SI): millimeter, mm; centimeter, cm; meter, m; gram, g; kilogram, kg; kiloPascal, kPa; liter, L; milliliter,
mL; cubic meter, m\3\; Terabecquerel, TBq; Gigabecquerel, GBq; millisievert, mSv; Newton, N;
(U.S.): Inch, in; foot, ft; ounce, oz; pound, lb; psig, psi; gallon, gal; cubic feet, ft \3\; Curie, Ci;
millicurie, mCi; millirem, mrem.
[Amdt. 171-111, 56 FR 66159, Dec. 20, 1991, as amended by Amdt. 171-136,
60 FR 49108, Sept. 21, 1995; Amdt. 171-135, 60 FR 50302, Sept. 28, 1995;
66 FR 33335, June 21, 2001; 66 FR 45378, Aug. 28, 2001; 68 FR 75740,
Dec. 31, 2003]
Sec. 171.11 Use of ICAO Technical Instructions.
Notwithstanding the requirements of parts 172 and 173 of this
subchapter, a hazardous material may be transported by aircraft, and by
motor vehicle either before or after being transported by aircraft, in
accordance with the ICAO Technical Instructions (IBR, see Sec. 171.7)
if the hazardous material:
(a) Is packaged, marked, labeled, classified, described and
certified on a shipping paper and otherwise in a condition for shipment
as required by the ICAO Technical Instructions;
(b) Is within the quantity limits prescribed for transportation by
either passenger-carrying or cargo aircraft, as appropriate, as
specified in the ICAO Technical Instructions;
(c) Is not a forbidden material or package according to Sec. 173.21
of this subchapter; is not a forbidden material as designated in Column
(3) of the Sec. 172.101 Table of this subchapter; and is not forbidden
by Column 9(A) of the Sec. 172.101 Table of this subchapter when
transported on passenger aircraft, or is not forbidden by Column 9(B) of
the Sec. 172.101 Table of this subchapter when transported by cargo
aircraft.
(d) Fulfills the following additional requirements as applicable:
(1) For a material that meets the definition of a hazardous
substance as defined in this subchapter, the shipping paper and package
markings must conform to the provisions in Sec. Sec. 172.203(c) and
172.324, respectively, of this subchapter.
(2) When a hazardous material, which is subject to the requirements
of the ICAO Technical Instructions, is also a hazardous waste as defined
in this subchapter:
(i) The word ``Waste'' must precede the proper shipping name on
shipping papers and package markings; and
(ii) It must comply with Sec. 172.205 with respect to the hazardous
waste manifests.
(3) When a hazardous material is not subject to the requirements of
the ICAO Technical Instructions, it must be transported as required by
this subchapter.
(4) When a hazardous material that is regulated by this subchapter
for transportation by highway is transported by motor vehicle on a
public highway under the provisions of this section, the following
requirements apply:
(i) The motor vehicle must be placarded in accordance with subpart F
of part 172 of this subchapter; and
(ii) The shipping paper may include an indication that the shipment
is being made under the provisions of this section or the letters
``ICAO.''
(5) For air bag inflators, air bag modules, or seat-belt
pretensioners, the shipping paper description must conform to the
requirements of Sec. 173.166(c) of this subchapter.
(6) For radioactive materials:
(i) Shipping papers for highway route controlled quantity
radioactive materials shipments must meet the requirements of Sec.
172.203(d)(10) of this subchapter.
(ii) Competent authority certification and any necessary
revalidation
[[Page 104]]
for Type B, Type B(U), Type B(M), and fissile materials packages must be
obtained from the appropriate authorities as specified in Sec. Sec.
173.471, 173.472 and 173.473 of this subchapter, and all requirements of
the certificates and revalidations must be met.
(iii) Except for limited quantities of Class 7 (radioactive)
material, the provisions of Sec. Sec. 172.204(c)(4), 173.448(e), (f)
and (g)(3) of this subchapter apply.
(iv) Excepted packages of limited quantities of radioactive
material, instruments or articles, or articles containing natural
uranium or thorium, must meet the provisions of Sec. 173.421, 173.424,
or 173.426 of this subchapter, as appropriate.
(v) Type A package contents shall be limited in accordance with
Sec. 173.431 of this subchapter.
(vi) The definition for ``radioactive material'' in Sec. 173.403 of
this subchapter applies to radioactive materials transported under the
provisions of this section.
(7) If a United States variation is indicated in the ICAO Technical
Instructions for any provision governing the transport of the hazardous
material, the hazardous material is transported in conformance with that
variation.
(8) Abbreviations may not be used in shipping paper entries or
package markings unless they are specifically authorized by this
subchapter. ICAO class or division numbers are not considered to be
abbreviations.
(9) When a hazardous material, which is subject to the requirements
of the ICAO Technical Instructions, is a material poisonous by
inhalation (see Sec. 171.8 of this subchapter)--
(i) The shipping description must include the words ``Toxic
Inhalation Hazard'' or ``Poison-Inhalation Hazard'' or ``Inhalation
Hazard'', as required in Sec. 172.203(m) of this subchapter;
(ii) The material must be packaged in accordance with the
requirements of this subchapter; and
(iii) The package must be marked in accordance with Sec. 172.313 of
this subchapter and labeled with ``POISON INHALATION HAZARD'' or
``POISON GAS'', as appropriate, in accordance with subpart E of part 172
of this subchapter.
(10) Shipments of hazardous materials under this section must
conform to the requirements for emergency response information as
prescribed in subpart G of part 172 of this subchapter.
(11) Packages of Class 1 (explosive) materials must be marked in
accordance with Sec. 172.320 of this subchapter.
(12) If an ammonium nitrate fertilizer or ammonium nitrate mixed
fertilizer, must not meet the definition and criteria of a Class 1
(explosive) material.
(13) Transportation of marine pollutants, as defined in Sec. 171.8
of this subchapter, in bulk packagings must conform to the requirements
of Sec. Sec. 172.203(l) and 172.322 of this subchapter.
(14) Except as provided for limited quantities of compressed gases
in containers of not more than 4 fluid ounces capacity under Sec.
173.306(a)(1) of this subchapter, aerosols must meet the definition for
``Aerosol'' in Sec. 171.8. In addition, an aerosol must be in a metal
packaging if the packaging exceeds 7.22 cubic inches.
(15) A chemical oxygen generator, including when fitted in
protective breathing equipment or other apparatus, is forbidden for
transportation aboard a passenger-carrying aircraft and must be
approved, classed, described and packaged in accordance with the
requirements of this subchapter for transportation on cargo-only
aircraft. A chemical oxygen generator that has been used or spent is
also forbidden for transportation on a passenger aircraft and cargo
aircraft only.
(16) A cylinder containing Oxygen, compressed, may not be
transported on a passenger-carrying aircraft or in an inaccessible cargo
location aboard a cargo-only aircraft unless it is packaged as required
by Part 173 and Part 178 of this subchapter and is placed in an overpack
or outer packaging that satisfies the requirements of Special Provision
A52 in Sec. 172.102.
(17) A self-reactive substance that is not identified by technical
name in the Self-reactive Materials Table in Sec. 173.224(b) of this
subchapter must be
[[Page 105]]
approved by the Associate Administrator in accordance with the
requirements of Sec. 173.124(a)(2)(iii) of this subchapter. An organic
peroxide that is not identified by a technical name in any of the
organic peroxide tables found in Sec. 173.225 of this subchapter must
be approved by the Associate Administrator in accordance with the
requirements of Sec. 173.128(d) of this subchapter.
(18) Primary lithium batteries and cells are forbidden for
transportation aboard passenger-carrying aircraft. Equipment containing
or packed with primary lithium batteries or cells are forbidden from
transport aboard passenger-carrying aircraft except as provided in Sec.
172.102, Special Provision A101 or A103, of this subchapter. Except for
primary lithium batteries and cells that are contained in or packed with
equipment, packagings containing primary lithium batteries and cells
that meet the exceptions in Sec. 173.185(b) and (c) of this subchapter
must be marked ``PRIMARY LITHIUM BATTERIES--FORBIDDEN FOR TRANSPORT
ABOARD PASSENGER AIRCRAFT'' and may be transported aboard cargo-only
aircraft.
[Amdt. 171-69, 47 FR 54821, Dec. 6, 1982]
Editorial Note: For Federal Register citations affecting Sec.
171.11, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 171.12 Import and export shipments.
(a) Importer's responsibility. Except in the case of a shipment from
Canada conforming to Sec. 171.12a of this subchapter, each person
importing a hazardous material into the United States shall provide the
shipper and the forwarding agent at the place of entry into the United
States timely and complete information as to the requirements of this
subchapter that will apply to the shipment of the material within the
United States. The shipper, directly or through the forwarding agent at
the place of entry, shall provide the initial carrier in the United
States the certificate of compliance required by Sec. 172.204 of this
subchapter. The carrier may not accept the material for transportation
unless the required certification is provided. All shipping paper
information required under paragraph (b) or (d) of this section must be
in English.
(b) IMDG Code. The IMDG Code (IBR, see Sec. 171.7) sets forth
descriptions, classifications, packagings, labeling and vessel stowage
requirements. Notwithstanding the provisions of this subchapter, a
material that is packaged, marked, classed, labeled, placarded,
described, stowed and segregated, and certified (including a container
packing certification, if applicable) in accordance with the IMDG Code,
and otherwise conforms to the requirements of this section, may be
offered and accepted for transportation and transported within the
United States. The following conditions and limitations apply:
(1) The provisions of this paragraph (b) apply only if all or part
of the transportation is by vessel.
(2) A number of materials listed in the IMDG Code are not subject to
the requirements of this subchapter. The provisions of this subchapter
do not apply to materials listed in the IMDG Code which are not
designated as hazardous materials under this subchapter. These materials
may, however, be transported in the U.S. when described, marked and
labeled in accordance with the IMDG Code.
(3) A material that is designated as a hazardous material under this
subchapter, but is not subject to the requirements of the IMDG Code (see
Sec. 171.12 of this subchapter) may not be transported under the
provisions of this section and is subject to the requirements of this
subchapter. Examples of such materials include flammable gas powered
vehicles and combustible liquids.
(4) A forbidden material or package according to Sec. 173.21 of
this subchapter or column 3 of the Sec. 172.101 table may not be
transported under the provisions of this section.
(5) Except for IBCs and UN portable tanks intended for liquids or
solids, bulk packagings must conform to the requirements of this
subchapter. For UN portable tanks, Special Provisions TP37, TP38, TP44
and TP45 must be met when applicable. Except as specified in paragraph
(b)(8) of this section
[[Page 106]]
for a material poisonous (toxic) by inhalation (see Sec. 171.8 of this
subchapter), the T Codes specified for specific hazardous materials in
Column 13 of the Dangerous Goods List of the IMDG Code may be applied to
the transportation of those materials in IM, IMO and DOT Specification
51 portable tanks when these portable tanks are authorized in accordance
with the requirements of this subchapter.
(6) For export, packagings must conform to the applicable
requirements in Sec. Sec. 173.24, 173.24a and 173.28 of this
subchapter.
(7) A Class 1 material must be classed and approved under the
procedures in subpart C of part 173 of this subchapter and conform to
the requirements of Sec. 172.320 and part 176 of this subchapter.
(8) When a hazardous material, which is subject to the requirements
of the IMDG Code, is a material poisonous by inhalation (see Sec. 171.8
of this subchapter)--
(i) The shipping description must include the words ``Toxic
Inhalation Hazard'' or ``Poison-Inhalation Hazard'' or ``Inhalation
Hazard'', as required in Sec. 172.203(m) of this subchapter;
(ii) The material must be packaged in accordance with the
requirements of this subchapter;
(iii) The package must be marked in accordance with Sec. 172.313 of
this subchapter;
(iv) Except as provided in paragraph (b)(8)(v) of this section, the
package must be labeled or placarded POISON GAS or POISON INHALATION
HAZARD, as appropriate, in accordance with subparts E and F of this
subchapter;
(v) A label or placard that conforms to IMDG Code specifications for
a ``Class 2.3'' or ``Class 6.1'' label or placard may be substituted for
the POISON GAS or POISON INHALATION HAZARD label or placard required by
paragraph (b)(8)(iv) of this section on a package transported in a
closed transport vehicle or freight container. The transport vehicle or
freight container must be marked with identification numbers for the
hazardous material, regardless of the total quantity contained in the
transport vehicle or freight container, in the manner specified in Sec.
172.313(c) of this subchapter and placarded as required by subpart F of
this subchapter;
(vi) A package, freight container, or transport vehicle may be
placarded in conformance with IMDG Code placard specifications for
``Class 2.3'' or ``Class 6.1'', as appropriate, in place of the POISON
GAS or POISON INHALATION HAZARD placard required by paragraph (b)(8)(iv)
of this section when moving within a single port area, including
contiguous harbor.
(9) Class 7 materials must conform to the provisions of paragraph
(d) of this section.
(10) For a hazardous waste, as defined in this subchapter--
(i) The word ``Waste'' must precede the proper shipping name on
shipping papers and packages; and
(ii) The requirements of Sec. 172.205 of this subchapter with
respect to hazardous waste manifests are applicable.
(11) A hazardous substance as defined in this subchapter must
conform to the requirements of Sec. Sec. 172.203(c) and 172.324 of this
subchapter.
(12) A poisonous material must conform to the requirements of Sec.
172.203(m) of this subchapter.
(13) [Reserved]
(14) Any ammonium nitrate fertilizer or ammonium nitrate mixed
fertilizer must not meet the definition and criteria of a Class 1
(explosive) material.
(15) Cylinders not manufactured to a DOT specification must conform
to the requirements of Sec. 173.301(j) through (m) of this subchapter
or, for Canadian manufactured cylinders, to the requirements of Sec.
171.12a(b)(13).
(16) Shipments of hazardous materials under this section must
conform to the requirements for emergency response information as
prescribed in subpart G of part 172 of this subchapter.
(17) Except as provided for limited quantities of compressed gases
in containers of not more than 4 fluid ounces capacity under Sec.
173.306(a)(1) of this subchapter, aerosols must meet the definition for
``Aerosol'' in Sec. 171.8.
(18) A chemical oxygen generator must be approved in accordance with
the requirements of this subchapter. A chemical oxygen generator and a
chemical oxygen generator (spent)
[[Page 107]]
must be classed, described and packaged in accordance with the
requirements of this subchapter.
(19) For air bag inflators, air bag modules, or seat-belt
pretensioners, the shipping paper description must conform to the
requirements of Sec. 173.166(c) of this subchapter.
(20) A self-reactive substance that is not identified by technical
name in the Self-Reactive Materials Table in Sec. 173.224(b) of this
subchapter must be approved by the Associate Administrator in accordance
with the requirements of Sec. 173.124(a)(2)(iii) of this subchapter. An
organic peroxide that is not identified by a technical name in any of
the organic peroxide tables found in Sec. 173.225 of this subchapter
must be approved by the Associate Administrator in accordance with the
requirements of Sec. 173.128(d) of this subchapter.
(21) No person may offer an IM or UN portable tank containing liquid
hazardous materials of Class 3, PG I or II, or PG III with a flash point
less than 100 [deg]F (38 [deg]C); Division 5.1, PG I or II; or Division
6.1, PG I or II, for unloading while it remains on a transport vehicle
with the motive power unit attached, unless it conforms to the
requirements in Sec. 177.834(o) of this subchapter.
(22) Except for primary lithium batteries and cells, packagings
containing primary lithium batteries and cells that meet the exceptions
in Sec. 173.185(b) and (c) of this subchapter must be marked ``PRIMARY
LITHIUM BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT''.
(c) Use of IMDG Code in port areas. Section 171.2 notwithstanding, a
hazardous material (other than Division 1.1 or 1.2 or Class 7) being
imported into or exported from the United States or passing through the
United States in the course of being shipped between places outside the
United States may be offered and accepted for transportation and
transported by motor vehicle within a single port area (including
contiguous harbors) when packaged, marked, classed, labeled, stowed and
segregated in accordance with the IMDG Code, if the hazardous material
is offered and accepted in accordance with the requirements of subparts
C and F of part 172 of this subchapter pertaining to shipping papers and
placarding and otherwise conforms to the applicable requirements of part
176 of this subchapter. The requirement in Sec. 172.201(d) of this
subchapter for an emergency telephone number does not apply to shipments
made in accordance with the IMDG Code if the hazardous material:
(1) Is not offloaded from the vessel;
(2) Is offloaded between ocean vessels at a U.S. port facility
without being transported by public highway.
(d) Use of International Atomic Energy Agency (IAEA) regulations for
Class 7 (radioactive) materials. Class 7 (radioactive) materials being
imported into or exported from the United States, or passing through the
United States in the course of being shipped between places outside the
United States, may be offered and accepted for transportation when
packaged, marked, labeled, and otherwise prepared for shipment in
accordance with IAEA ``Regulations for the Safe Transport of Radioactive
Material,'' No. TS-R-1 1996 edition (IBR, see Sec. 171.7), if--
(1) Highway route controlled quantities (see Sec. 173.403 of this
subchapter) are shipped in accordance with Sec. Sec. 172.203(d)(4),
172.507 and 173.22(c) of this subchapter;
(2) For fissile materials and Type B packages, the competent
authority certification and any necessary revalidation is obtained from
the appropriate competent authorities as specified in Sec. Sec.
173.471, 173.472 and 173.473 of this subchapter and all requirements of
the certificates and revalidations are met;
(3) Type A package contents are limited in accordance with Sec.
173.431 of this subchapter;
(4) The country of origin for the shipment has adopted, No. TS-R-1
of the IAEA ``Regulations for the Safe Transport of Radioactive
Material,'' 1996 edition;
(5) The requirements of Sec. 173.448 are fulfilled, when
applicable; and
(6) Shipments comply with the requirements for emergency response
information prescribed in subpart G of part 172 of this subchapter.
(e) Shipments to or from Mexico. Unless otherwise excepted,
hazardous materials shipments from Mexico to the
[[Page 108]]
United States or from the United States to Mexico must conform to all
applicable requirements of this subchapter. When a hazardous material
that is a material poisonous by inhalation (see Sec. 171.8) is
transported by highway or rail from Mexico to the United States, or from
the United States to Mexico, the following requirements apply:
(1) The shipping description must include the words ``Toxic
Inhalation Hazard'' or ``Poison-Inhalation Hazard'' or ``Inhalation
Hazard'', as required in Sec. 172.203(m) of this subchapter.
(2) The material must be packaged in accordance with requirements of
this subchapter.
(3) The package must be marked in accordance with Sec. 172.313 of
this subchapter.
(4) Except as provided in paragraph (e)(5) of this section, the
package must be labeled or placarded POISON GAS or POISON INHALATION
HAZARD, as appropriate, in accordance with subparts E and F of this
subchapter.
(5) A label or placard that conforms to the UN Recommendations (IBR,
see Sec. 171.7) specifications for a ``Division 2.3'' or ``Division
6.1'' label or placard may be substituted for the POISON GAS or POISON
INHALATION HAZARD label or placard required by Sec. Sec. 172.400(a) and
172.504(e) of this subchapter on a package transported in a closed
transport vehicle or freight container. The transport vehicle or freight
container must be marked with identification numbers for the material,
regardless of the total quantity contained in the transport vehicle or
freight container, in the manner specified in Sec. 172.313(c) of this
subchapter and placarded as required by subpart F of this subchapter.
[Amdt. 171-111, 55 FR 52472, Dec. 21, 1990]
Editorial Note: For Federal Register citations affecting Sec.
171.12, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 171.12a Canadian shipments and packagings.
(a) Scope and applicability. This section sets forth provisions for
the transportation by rail or highway of shipments of hazardous
materials which conform to the regulations of the Government of Canada
but which may differ from the requirements of this subchapter with
regard to hazard communication, classification or packaging. Except as
provided in paragraph (b)(5)(iv) of this section, the provisions apply
only to shipments which originate in Canada and either terminate in the
U.S. or transit the U.S. to a Canadian or foreign destination, and to
the return to Canada of bulk packagings that meet the requirements of a
DOT or UN Specification and other bulk packagings containing only
residues of hazardous materials that were originally imported into the
U.S. Reciprocal provisions, applicable to exports from the U.S., appear
in the regulations of the Government of Canada.
(b) Conditions and limitations. Notwithstanding the requirements of
parts 172, 173, and 178 of this subchapter, and subject to the
limitations of paragraph (a) of this section, a hazardous material that
is classed, marked, labeled, placarded, described on a shipping paper,
and packaged in accordance with the Transportation of Dangerous Goods
(TDG) Regulations (IBR, see Sec. 171.7) issued by the Government of
Canada may be offered for transportation and transported to or through
the United States by motor vehicle or rail car. The following conditions
and limitations apply:
(1) A number of materials listed in the TDG Regulations may not be
subject to the requirements of this subchapter. The provisions of this
subchapter do not apply to materials listed in the TDG Regulations which
are not designated as hazardous materials under this subchapter. These
materials may, however, be transported in the U.S. when described,
marked and labeled in accordance with the TDG Regulations.
(2) A material designated as a hazardous material under this
subchapter which is not subject to the requirements of the TDG
Regulations or is afforded hazard communication or packaging exceptions
not authorized in this subchapter (e.g., paragraph 1.16 of the TDG
Regulations excepts quantities of hazardous materials less than or equal
to 500 kg gross transported by highway
[[Page 109]]
or rail) may not be transported under the provisions of this section.
(3) A forbidden material or package according to Sec. 173.21 of
this subchapter or column 3 of the Sec. 172.101 table may not be
transported under the provisions of this section.
(4) A Class 1 material must be classed and approved under the
procedures in subpart C of part 173 of this subchapter, and packages of
Class 1 materials must be marked in accordance with Sec. 172.320 of
this subchapter.
(5) When a hazardous material, which is a material poisonous by
inhalation under the provisions of this subchapter (see Sec. 171.8 of
this subchapter), is subject to the requirements of the TDG
Regulations--
(i) The shipping description must include the words ``Toxic
Inhalation Hazard'' or ``Poison Inhalation Hazard'' or ``Inhalation
Hazard'', as required in Sec. 172.203(m) of this subchapter;
(ii) The material must be packaged in accordance with the
requirements of this subchapter;
(iii) The package must be marked in accordance with Sec. 172.313 of
this subchapter;
(iv) Except as provided in paragraph (b)(5)(v) of this section and
for a package containing anhydrous ammonia, the package must be labeled
or placarded POISON GAS or POISON INHALATION HAZARD, as appropriate, in
accordance with subparts E and F of this subchapter;
(v) A label or placard that conforms to the specifications in the
TDG Regulations for a ``Class 2.3'' or ``Class 6.1'' label or placard
may be substituted for the POISON GAS or POISON INHALATION HAZARD label
or placard required by paragraph (b)(5)(iv) of this section on a package
transported in a closed transport vehicle or freight container. The
transport vehicle or freight container must be marked with
identification numbers for the material, regardless of quantity, in the
manner specified in Sec. 172.313(c) of this subchapter and placarded as
required by subpart F of this subchapter. When moving in the United
States, the transport vehicle or freight container may also be placarded
in accordance with the appropriate TDG regulations in addition to the
POISON GAS or POISON INHALATION HAZARD placards required by paragraph
(b)(5)(iv) of this section;
(vi) For shipments of anhydrous ammonia, the shipping paper must
contain an indication that the markings, labels and placards have been
applied in conformance with the TDG Regulations and this paragraph
(b)(5).
(6) Required shipping descriptions and package markings must be in
English. Abbreviations may not be used unless specifically authorized by
this subchapter. Identification numbers must be preceded by ``UN'' or
``NA''. The use of an identification number preceded by ``PIN'' is not
authorized.
(7) Shipments must conform to the requirements for emergency
response information in subpart G of part 172 of this subchapter.
(8) A Class 7 material must conform to the provisions of Sec.
171.12(d) of this subchapter;
(9) For hazardous waste as defined in this subchapter--
(i) The word ``Waste'' must precede the proper shipping name on
shipping papers and packages; and
(ii) The requirements of Sec. 172.204 of this subchapter with
respect to the shipper's certification and Sec. 172.205 of this
subchapter with respect to hazardous waste manifests are applicable;
(10) A hazardous substance as defined in this subchapter must
conform to the requirements of Sec. Sec. 172.203(c) and 172.324 of this
subchapter; and
(11) A poisonous material must conform to the requirements of Sec.
172.203(m) of this subchapter.
(12) Except for primary lithium batteries and cells, packagings
containing primary lithium batteries and cells that meet the exceptions
in Sec. 173.185(b) and (c) of this subchapter must be marked ``PRIMARY
LITHIUM BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT''.
(13) When the provisions of this subchapter require that a DOT
specification or UN standard packaging must be used for a hazardous
material, a packaging authorized by the TDG Regulations may be used only
if it corresponds to the DOT specification or
[[Page 110]]
UN packaging authorized by this subchapter. Cylinders not manufactured
to DOT specifications must conform to the requirements of Sec.
173.301(j) through (m) of this subchapter.
(14) Any ammonium nitrate fertilizer or ammonium nitrate mixed
fertilizer must not meet the definition and criteria of a Class 1
(explosive) material.
(15) Transportation of marine pollutants, as defined in Sec. 171.8
of this subchapter, must conform to the requirements of Sec. Sec.
172.203(l) and 172.322 of this subchapter.
(16) Except as provided for limited quantities of compressed gases
in containers of not more than 4 fluid ounces capacity under Sec.
173.306(a)(1) of this subchapter, aerosols must meet the definition for
``Aerosol'' in Sec. 171.8.
(17) A chemical oxygen generator must be approved in accordance with
the requirements of this subchapter. A chemical oxygen generator and a
chemical oxygen generator (spent) must be classed, described and
packaged in accordance with the requirements of this subchapter.
(18) A self-reactive substance that is not identified by technical
name in the Self-reactive Materials Table in Sec. 173.224(b) of this
subchapter must be approved by the Associate Administrator in accordance
with the requirements of Sec. 173.124(a)(2)(iii) of this subchapter. An
organic peroxide that is not identified by a technical name in any of
the organic peroxide tables found in Sec. 173.225 of this subchapter
must be approved by the Associate Administrator in accordance with the
requirements of Sec. 173.128(d) of this subchapter.
(19) Rail and motor carriers must comply with 49 CFR 1572.9 and 49
CFR 1572.11 to the extent those regulations apply, when transporting
Class 1 materials.
(20) No person may offer an IM or UN portable tank containing liquid
hazardous materials of Class 3, PG I or II, or PG III with a flash point
less than 100 [deg]F (38 [deg]C); Division 5.1, PG I or II; or Division
6.1, PG I or II, for unloading while it remains on a transport vehicle
with the motive power unit attached, unless it conforms to the
requirements in Sec. 177.834(o) of this subchapter.
[Amdt. 171-111, 55 FR 52473]
Editorial Note: For Federal Register citations affecting Sec.
171.12a, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 171.14 Transitional provisions for implementing certain
requirements.
General. The purpose of the provisions of this section is to provide
an orderly transition to certain new requirements so as to minimize any
burdens associated with them.
(a) Previously filled packages--(1) Packages filled prior to October
1, 1991. Notwithstanding the marking and labeling provisions of subparts
D and E, respectively, of part 172, and the packaging provisions of part
173 and subpart B of part 172 of this subchapter, a package may be
offered for transportation and transported prior to October 1, 2001, if
it--
(i) Conforms to the old requirements of this subchapter in effect on
September 30, 1991;
(ii) Was filled with a hazardous material prior to October 1, 1991;
(iii) Is marked ``Inhalation Hazard'' if appropriate, in accordance
with Sec. 172.313 of this subchapter or Special Provision 13, as
assigned in the Sec. 172.101 table; and
(iv) Is not emptied and refilled on or after October 1, 1991.
(2) Non-bulk packages filled prior to October 1, 1996.
Notwithstanding the packaging provisions of subpart B of part 172 and
the packaging provisions of part 173 of this subchapter with respect to
UN standard packagings, a non-bulk package other than a cylinder may be
offered for transportation and transported domestically prior to October
1, 1999, if it--
(i) Conforms to the requirements of this subchapter in effect on
September 30, 1996;
(ii) Was filled with a hazardous material prior to October 1, 1996;
and
(iii) Is not emptied and refilled on or after October 1, 1996.
(b) Transitional placarding provisions. Until October 1, 2001,
placards which conform to specifications for placards in effect on
September 30, 1991, or placards specified in the December 21, 1990 final
rule may be used, for highway transportation only, in place of the
placards specified in subpart F of part
[[Page 111]]
172 of this subchapter, in accordance with the following table:
Placard Substitution Table
------------------------------------------------------------------------
Current placard Old (Sept. 30, 1991)
Hazard class or division No. name placard name
------------------------------------------------------------------------
Division 1.1................. Explosives 1.1. Explosives A.
Division 1.2................. Explosives 1.2. Explosives A.
Division 1.3................. Explosives 1.3. Explosives B.
Division 1.4................. Explosives 1.4. Dangerous.
Division 1.5................. Explosives 1.5. Blasting agents.
Division 1.6................. Explosives 1.6. Dangerous.
Division 2.1................. Flammable gas.. Flammable gas.
Division 2.2................. Nonflammable Nonflammable gas.
gas.
Division 2.3\1\.............. Poison gas..... Poison gas.
Class 3...................... Flammable...... Flammable.
Combustible liquid........... Combustible.... Combustible.
Division 4.1................. Flammable solid Flammable solid.
Division 4.2................. Spontaneously Flammable solid.
combustible.
Division 4.3................. Dangerous when Flammable solid W.
wet.
Division 5.1................. Oxidizer....... Oxidizer.
Division 5.2................. Organic Organic peroxide.
peroxide.
Division 6.1, (inhalation Poison Poison.
hazard, Zone A or B)\1\. inhalation
hazard.
Division 6.1, PG I (other Posion......... Poison.
than Zone A or B inhalation
hazard), PG II, or PG III.
Class 7...................... Radioactive.... Radioactive.
Class 8...................... Corrosive...... Corrosive.
Class 9...................... Class 9........ (none required).
------------------------------------------------------------------------
\1\ For materials poisonous by inhalation, by all modes of
transportation, until October 1, 2001, placards may be used that
conform to specifications for placards (1) in effect on September 30,
1991, (2) specified in the December 21, 1990 final rule, or (3)
specified in the July 22, 1997 final rule.
(c) Non-specification fiber drums. A non-specification fiber drum
with a removable head is authorized for a liquid hazardous material in
Packing Group III that is not poisonous by inhalation for which the
packaging was authorized under the requirements of part 172 or part 173
of this subchapter in effect on September 30, 1991. This authorization
expires on the date on which funds are authorized to be appropriated to
carry out chapter 51 of title 49, United States Code (related to
transportation of hazardous materials), for fiscal years beginning after
September 30, 1997. Information concerning this funding authorization
date may be obtained by contacting the Office of the Associate
Administrator.
(d) A final rule published in the Federal Register on December 20,
2004, effective January 1, 2005, resulted in revisions to this
subchapter. During the transition period, until January 1, 2006, as
provided in paragraph (d)(1) of this section, a person may elect to
comply with either the applicable requirements of this subchapter in
effect on December 31, 2004, or the requirements published in the
December 20, 2004, final rule.
(1) Transition dates. The effective date of the final rule published
on December 20, 2004, is January 1, 2005. A delayed compliance date of
January 1, 2006 is authorized. On and after January 1, 2006, all
applicable regulatory requirements adopted in the final rule in effect
on January 1, 2005 must be met.
(2) Intermixing old and new requirements. Marking, labeling,
placarding, and shipping paper descriptions must conform to either the
old requirements of this subchapter in effect on December 31, 2004, or
the new requirements of this subchapter in the final rule without
intermixing communication elements, except that intermixing is
permitted, during the applicable transition period, for packaging,
hazard communication, and handling provisions, as follows:
(3) [Reserved]
(4) Until January 1, 2010, a hazardous material may be transported
in an IM, IMO, or DOT Specification 51 portable tank in accordance with
the T Codes (Special Provisions) assigned to a hazardous material in
Column (7) of the Sec. 172.101 Table in effect on September 30, 2001.
[[Page 112]]
(5) Proper shipping names that included the word ``inhibited'' prior
to the June 21, 2001 final rule in effect on October 1, 2001 are
authorized on packagings and shipping papers in place of the word
``stabilized'' until October 1, 2007. Proper shipping names that
included the word ``compressed'' prior to the final rule published on
July 31, 2003 and effective on October 1, 2003 may continue to be shown
on packagings and shipping papers until October 1, 2007.
(6) Section 172.202(a)(6) requires the number and types of packages
to be indicated on shipping papers. Until October 1, 2007, a person may
elect to comply with the requirements for the number and type of
packages in effect on September 30, 2003.
(7) Except for transport by vessel, the non-mandatory shipping paper
provision to include the subsidiary hazard class or division number in
accordance with Sec. 172.202(a)(2), in effect on September 30, 2003, is
authorized until October 1, 2005.
(8) Until October 1, 2005, proper shipping names that did not
identify specific isomers by numbers or letters preceding the chemical
name prior to the final rule published on July 31, 2003 and effective on
October 1, 2003, may continue to be marked on packagings and are
authorized on shipping papers in place of the proper shipping names
revised in the July 31, 2003 final rule.
(e) A Division 6.2 label conforming to specifications in Sec.
172.432 of this subchapter in effect on September 30, 2002, may be used
until October 1, 2005.
(f) 49 CFR 175.33 sets out requirements regarding the availability
of information for hazardous materials transported by aircraft. Until
April 1, 2005, a person may elect to comply with either the applicable
requirements of 49 CFR 175.33 in effect on September 30, 2003, and
contained in 49 CFR Part 175 revised as of October 1, 2002, or the
requirements of that section contained in 49 CFR Part 175 revised as of
October 1, 2003. On April 1, 2005, all applicable regulatory
requirements in 49 CFR 175.33 in effect on October 1, 2003 must be met.
[Amdt. 171-131, 59 FR 67406, Dec. 29, 1994]
Editorial Note: For Federal Register citations affecting Sec.
171.14, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 171.15 Immediate notice of certain hazardous materials incidents.
(a) General. As soon as practical but no later than 12 hours after
the occurrence of any incident described in paragraph (b) of this
section, each person in physical possession of the hazardous material
must provide notice by telephone to the National Response Center (NRC)
on 800-424-8802 (toll free) or 202-267-2675 (toll call). Notice
involving an infectious substance (etiologic agent) may be given to the
Director, Centers for Disease Control and Prevention, U.S. Public Health
Service, Atlanta, GA, 800-232-0124 (toll free), in place of notice to
the NRC. Each notice must include the following information:
(1) Name of reporter;
(2) Name and address of person represented by reporter;
(3) Phone number where reporter can be contacted;
(4) Date, time, and location of incident;
(5) The extent of injury, if any;
(6) Class or division, proper shipping name, and quantity of
hazardous materials involved, if such information is available; and
(7) Type of incident and nature of hazardous material involvement
and whether a continuing danger to life exists at the scene.
(b) Reportable incident. A telephone report is required whenever any
of the following occurs during the course of transportation in commerce
(including loading, unloading, and temporary storage):
(1) As a direct result of a hazardous material--
(i) A person is killed;
(ii) A person receives an injury requiring admittance to a hospital;
(iii) The general public is evacuated for one hour or more;
(iv) A major transportation artery or facility is closed or shut
down for one hour or more; or
(v) The operational flight pattern or routine of an aircraft is
altered;
(2) Fire, breakage, spillage, or suspected radioactive contamination
occurs involving a radioactive material (see also Sec. 176.48 of this
subchapter);
[[Page 113]]
(3) Fire, breakage, spillage, or suspected contamination occurs
involving an infectious substance other than a diagnostic specimen or
regulated medical waste;
(4) A release of a marine pollutant occurs in a quantity exceeding
450 L (119 gallons) for a liquid or 400 kg (882 pounds) for a solid; or
(5) A situation exists of such a nature (e.g., a continuing danger
to life exists at the scene of the incident) that, in the judgment of
the person in possession of the hazardous material, it should be
reported to the NRC even though it does not meet the criteria of
paragraph (b) (1), (2), (3) or (4) of this section.
(c) Written report. Each person making a report under this section
must also make the report required by Sec. 171.16 of this subpart.
Note to Sec. 171.15: Under 40 CFR 302.6, EPA requires persons in
charge of facilities (including transport vehicles, vessels, and
aircraft) to report any release of a hazardous substance in a quantity
equal to or greater than its reportable quantity, as soon as that person
has knowledge of the release, to DOT's National Response Center at (toll
free) 800-424-8802 or (toll) 202-267-2675.
[68 FR 67759, Dec. 3, 2003]
Sec. 171.16 Detailed hazardous materials incident reports.
(a) General. Each person in physical possession of a hazardous
material at the time that any of the following incidents occurs during
transportation (including loading, unloading, and temporary storage)
must submit a Hazardous Materials Incident Report on DOT Form F 5800.1
(01/2004) within 30 days of discovery of the incident:
(1) Any of the circumstances set forth in Sec. 171.15(b);
(2) An unintentional release of a hazardous material or the
discharge of any quantity of hazardous waste;
(3) A specification cargo tank with a capacity of 1,000 gallons or
greater containing any hazardous material suffers structural damage to
the lading retention system or damage that requires repair to a system
intended to protect the lading retention system, even if there is no
release of hazardous material; or
(4) An undeclared hazardous material is discovered.
(b) Providing and retaining copies of the report. Each person
reporting under this section must--
(1) Submit a written Hazardous Materials Incident Report to the
Information Systems Manager, PHH-63, Pipeline and Hazardous Materials
Safety Administration, Department of Transportation, Washington, DC
20590-0001, or an electronic Hazardous Material Incident Report to the
Information System Manager, DHM-63, Research and Special Programs
Administration, Department of Transportation, Washington, DC 20590-0001
at http://hazmat.dot.gov;
(2) For an incident involving transportation by aircraft, submit a
written or electronic copy of the Hazardous Materials Incident Report to
the FAA Security Field Office nearest the location of the incident; and
(3) Retain a written or electronic copy of the Hazardous Materials
Incident Report for a period of two years at the reporting person's
principal place of business. If the written or electronic Hazardous
Materials Incident Report is maintained at other than the reporting
person's principal place of business, the report must be made available
at the reporting person's principal place of business within 24 hours of
a request for the report by an authorized representative or special
agent of the Department of Transportation.
(c) Updating the incident report. A Hazardous Materials Incident
Report must be updated within one year of the date of occurrence of the
incident whenever:
(1) A death results from injury caused by a hazardous material;
(2) There was a misidentification of the hazardous material or
package information on a prior incident report;
(3) Damage, loss or related cost that was not known when the initial
incident report was filed becomes known; or
(4) Damage, loss, or related cost changes by $25,000 or more, or 10%
of the prior total estimate, whichever is greater.
(d) Exceptions. Unless a telephone report is required under the
provisions of Sec. 171.15 of this part, the requirements of
[[Page 114]]
paragraphs (a), (b), and (c) of this section do not apply to the
following incidents:
(1) A release of a minimal amount of material from--
(i) A vent, for materials for which venting is authorized;
(ii) The routine operation of a seal, pump, compressor, or valve; or
(iii) Connection or disconnection of loading or unloading lines,
provided that the release does not result in property damage.
(2) An unintentional release of hazardous material when:
(i) The material is properly classed as--
(A) ORM-D; or
(B) a Packing Group III material in Class or Division 3, 4, 5, 6.1,
8, or 9;
(ii) Each package has a capacity of less than 20 liters (5.2
gallons) for liquids or less than 30 kg (66 pounds) for solids;
(iii) The total aggregate release is less than 20 liters (5.2
gallons) for liquids or less than 30 kg (66 pounds) for solids; and
(iv) The material is not--
(A) Offered for transportation or transported by aircraft,
(B) A hazardous waste, or
(C) An undeclared hazardous material.
(3) An undeclared hazardous material discovered in an air
passenger's checked or carry-on baggage during the airport screening
process. (For discrepancy reporting by carriers, see Sec. 175.31 of
this subchapter.)
[68 FR 67759, Dec. 3, 2003; 69 FR 30119, May 26, 2004, as amended at 70
FR 56091, Sept. 23, 2005]
Sec. Sec. 171.17-171.18 [Reserved]
Sec. 171.19 Approvals or authorizations issued by the Bureau of
Explosives.
Effective December 31, 1998, approvals or authorizations issued by
the Bureau of Explosives (BOE), other than those issued under part 179
of this subchapter, are no longer valid.
[63 FR 37459, July 10, 1998]
Sec. 171.20 Submission of Examination Reports.
(a) When it is required in this subchapter that the issuance of an
approval by the Associate Administrator be based on an examination by
the Bureau of Explosives (or any other test facility recognized by
PHMSA), it is the responsibility of the applicant to submit the results
of the examination to the Associate Administrator.
(b) Applications for approval submitted under paragraph (a) of this
section, must be submitted to the Associate Administrator for Hazardous
Materials Safety, Pipeline and Hazardous Materials Safety
Administration, Washington, DC 20590-0001.
(c) Any applicant for an approval aggrieved by an action taken by
the Associate Administrator, under this subpart may file an appeal with
the Administrator, PHMSA within 30 days of service of notification of a
denial.
[Amdt. 171-54, 45 FR 32692, May 19, 1980, as amended by Amdt. 171-66, 47
FR 43064, Sept. 30, 1982; Amdt. 171-109, 55 FR 39978, Oct. 1, 1990;
Amdt. 171-111, 56 FR 66162, Dec. 20, 1991; 66 FR 45378, Aug. 28, 2001]
Sec. 171.21 Assistance in investigations and special studies.
(a) A shipper, carrier, package owner, package manufacturer or
certifier, repair facility, or person reporting an incident under the
provisions of Sec. 171.16 must:
(1) Make all records and information pertaining to the incident
available to an authorized representative or special agent of the
Department of Transportation upon request; and
(2) Give an authorized representative or special agent of the
Department of Transportation reasonable assistance in the investigation
of the incident.
(b) If an authorized representative or special agent of the
Department of Transportation makes an inquiry of a person required to
complete an incident report in connection with a study of incidents, the
person shall:
(1) Respond to the inquiry within 30 days after its receipt or
within such other time as the inquiry may specify; and
(2) Provide true and complete answers to any questions included in
the inquiry.
[68 FR 67760, Dec. 3, 2003]
[[Page 115]]
PART 172_HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS
MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, AND TRAINING
REQUIREMENTS--Table of Contents
Subpart A_General
Sec.
172.1 Purpose and scope.
172.3 Applicability.
Subpart B_Table of Hazardous Materials and Special Provisions
172.101 Purpose and use of hazardous materials table.
172.102 Special provisions.
Subpart C_Shipping Papers
172.200 Applicability.
172.201 Preparation and retention of shipping papers.
172.202 Description of hazardous material on shipping papers.
172.203 Additional description requirements.
172.204 Shipper's certification.
172.205 Hazardous waste manifest.
Subpart D_Marking
172.300 Applicability.
172.301 General marking requirements for non-bulk packagings.
172.302 General marking requirements for bulk packagings.
172.303 Prohibited marking.
172.304 Marking requirements.
172.306 [Reserved]
172.308 Authorized abbreviations.
172.310 Class 7 (radioactive) materials.
172.312 Liquid hazardous materials in non-bulk packagings.
172.313 Poisonous hazardous materials.
172.315 Packages containing limited quantities.
172.316 Packagings containing materials classed as ORM-D.
172.317 KEEP AWAY FROM HEAT handling mark.
172.320 Explosive hazardous materials.
172.322 Marine pollutants.
172.323 Infectious substances.
172.324 Hazardous substances in non-bulk packagings.
172.325 Elevated temperature materials.
172.326 Portable tanks.
172.328 Cargo tanks.
172.330 Tank cars and multi-unit tank car tanks.
172.331 Bulk packagings other than portable tanks, cargo tanks, tank
cars and multi-unit tank car tanks.
172.332 Identification number markings.
172.334 Identification numbers; prohibited display.
172.336 Identification numbers; special provisions.
172.338 Replacement of identification numbers.
Subpart E_Labeling
172.400 General labeling requirements.
172.400a Exceptions from labeling.
172.401 Prohibited labeling.
172.402 Additional labeling requirements.
172.403 Class 7 (radioactive) material.
172.404 Labels for mixed and consolidated packaging.
172.405 Authorized label modifications.
172.406 Placement of labels.
172.407 Label specifications.
172.411 EXPLOSIVE 1.1, 1.2, 1.3, 1.4, 1.5 and 1.6 labels, and EXPLOSIVE
Subsidiary label.
172.415 NON-FLAMMABLE GAS label.
172.416 POISON GAS label.
172.417 FLAMMABLE GAS label.
172.419 FLAMMABLE LIQUID label.
172.420 FLAMMABLE SOLID label.
172.422 SPONTANEOUSLY COMBUSTIBLE label.
172.423 DANGEROUS WHEN WET label.
172.426 OXIDIZER label.
172.427 ORGANIC PEROXIDE label.
172.429 POISON INHALATION HAZARD label.
172.430 POISON label.
172.431 [Reserved]
172.432 INFECTIOUS SUBSTANCE label.
172.436 RADIOACTIVE WHITE-I label.
172.438 RADIOACTIVE YELLOW-II label.
172.440 RADIOACTIVE YELLOW-III label.
172.441 FISSILE label.
172.442 CORROSIVE label.
172.444 [Reserved]
172.446 CLASS 9 label.
172.448 CARGO AIRCRAFT ONLY label.
172.450 EMPTY label.
Subpart F_Placarding
172.500 Applicability of placarding requirements.
172.502 Prohibited and permissive placarding.
172.503 Identification number display on placards.
172.504 General placarding requirements.
172.505 Placarding for subsidiary hazards.
172.506 Providing and affixing placards: Highway.
172.507 Special placarding provisions: Highway.
172.508 Placarding and affixing placarding: Rail.
172.510 Special placarding provisions: Rail.
172.512 Freight containers and aircraft unit load devices.
172.514 Bulk packagings.
[[Page 116]]
172.516 Visibility and display of placards.
172.519 General specifications for placards.
172.521 DANGEROUS placard.
172.522 EXPLOSIVES 1.1, EXPLOSIVES 1.2 and EXPLOSIVES 1.3 placards.
172.523 EXPLOSIVES 1.4 placard.
172.524 EXPLOSIVES 1.5 placard.
172.525 EXPLOSIVES 1.6 placard.
172.526 [Reserved]
172.527 Background requirements for certain placards.
172.528 NON-FLAMMABLE GAS placard.
172.530 OXYGEN placard.
172.532 FLAMMABLE GAS placard.
172.536 [Reserved]
172.540 POISON GAS placard.
172.542 FLAMMABLE placard.
172.544 COMBUSTIBLE placard.
172.546 FLAMMABLE SOLID placard.
172.547 SPONTANEOUSLY COMBUSTIBLE placard.
172.548 DANGEROUS WHEN WET placard.
172.550 OXIDIZER placard.
172.552 ORGANIC PEROXIDE placard.
172.553 [Reserved]
172.554 POISON placard.
172.555 POISON INHALATION HAZARD placard.
172.556 RADIOACTIVE placard.
172.558 CORROSIVE placard.
172.560 CLASS 9 placard.
Subpart G_Emergency Response Information
172.600 Applicability and general requirements.
172.602 Emergency response information.
172.604 Emergency response telephone number.
172.606 Carrier information contact.
Subpart H_Training
172.700 Purpose and scope.
172.701 Federal-State relationship.
172.702 Applicability and responsibility for training and testing.
172.704 Training requirements.
Subpart I_Security Plans
172.800 Purpose and applicability.
172.802 Components of a security plan.
172.804 Relationship to other Federal requirements.
Appendix A to Part 172--Office of Hazardous Materials Transportation
Color Tolerance Charts and Tables
Appendix B to Part 172--Trefoil Symbol
Appendix C to Part 172--Dimensional Specifications for Recommended
Placard Holder
Authority: 49 U.S.C. 5101-5127, 44701; 49 CFR 1.53.
Source: Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, unless otherwise
noted.
Subpart A_General
Sec. 172.1 Purpose and scope.
This part lists and classifies those materials which the Department
has designated as hazardous materials for purposes of transportation and
prescribes the requirements for shipping papers, package marking,
labeling, and transport vehicle placarding applicable to the shipment
and transportation of those hazardous materials.
[Amdt. 172-29, 41 FR 15997, Apr. 15, 1976, as amended by 66 FR 45379,
Aug. 28, 2001]
Sec. 172.3 Applicability.
(a) This part applies to--
(1) Each person who offers a hazardous material for transportation,
and
(2) Each carrier by air, highway, rail, or water who transports a
hazardous material.
(b) When a person, other than one of those provided for in paragraph
(a) of this section, performs a packaging labeling or marking function
required by this part, that person shall perform the function in
accordance with this part.
[Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 172-32,
41 FR 38179, Sept. 9, 1976]
Subpart B_Table of Hazardous Materials and Special Provisions
Sec. 172.101 Purpose and use of hazardous materials table.
(a) The Hazardous Materials Table (Table) in this section designates
the materials listed therein as hazardous materials for the purpose of
transportation of those materials. For each listed material, the Table
identifies the hazard class or specifies that the material is forbidden
in transportation, and gives the proper shipping name or directs the
user to the preferred proper shipping name. In addition, the Table
specifies or references requirements in this subchapter pertaining to
labeling, packaging, quantity limits aboard aircraft and stowage of
hazardous materials aboard vessels.
(b) Column 1: Symbols. Column 1 of the Table contains six symbols
(``+'', ``A'', ``D'', ``G'', ``I'' and ``W'') as follows:
[[Page 117]]
(1) The plus (+) sign fixes the proper shipping name, hazard class
and packing group for that entry without regard to whether the material
meets the definition of that class, packing group or any other hazard
class definition. When the plus sign is assigned to a proper shipping
name in Column (1) of the Sec. 172.101 Table, it means that the
material is known to pose a risk to humans. When a plus sign is assigned
to mixtures or solutions containing a material where the hazard to
humans is significantly different from that of the pure material or
where no hazard to humans is posed, the material may be described using
an alternative shipping name that represents the hazards posed by the
material. An appropriate alternate proper shipping name and hazard class
may be authorized by the Associate Administrator.
(2) The letter ``A'' denotes a material that is subject to the
requirements of this subchapter only when offered or intended for
transportation by aircraft, unless the material is a hazardous substance
or a hazardous waste. A shipping description entry preceded by an ``A''
may be used to describe a material for other modes of transportation
provided all applicable requirements for the entry are met.
(3) The letter ``D'' identifies proper shipping names which are
appropriate for describing materials for domestic transportation but may
be inappropriate for international transportation under the provisions
of international regulations (e.g., IMO, ICAO). An alternate proper
shipping name may be selected when either domestic or international
transportation is involved.
(4) The letter ``G'' identifies proper shipping names for which one
or more technical names of the hazardous material must be entered in
parentheses, in association with the basic description. (See Sec.
172.203(k).)
(5) The letter ``I'' identifies proper shipping names which are
appropriate for describing materials in international transportation. An
alternate proper shipping name may be selected when only domestic
transportation is involved.
(6) The letter ``W'' denotes a material that is subject to the
requirements of this subchapter only when offered or intended for
transportation by vessel, unless the material is a hazardous substance
or a hazardous waste. A shipping description entry preceded by a ``W''
may be used to describe a material for other modes of transportation
provided all applicable requirements for the entry are met.
(c) Column 2: Hazardous materials descriptions and proper shipping
names. Column 2 lists the hazardous materials descriptions and proper
shipping names of materials designated as hazardous materials.
Modification of a proper shipping name may otherwise be required or
authorized by this section. Proper shipping names are limited to those
shown in Roman type (not italics).
(1) Proper shipping names may be used in the singular or plural and
in either capital or lower case letters. Words may be alternatively
spelled in the same manner as they appear in the ICAO Technical
Instructions or the IMDG Code. For example ``aluminum'' may be spelled
``aluminium'' and ``sulfur'' may be spelled ``sulphur''. However, the
word ``inflammable'' may not be used in place of the word ``flammable''.
(2) Punctuation marks and words in italics are not part of the
proper shipping name, but may be used in addition to the proper shipping
name. The word ``or'' in italics indicates that terms in the sequence
may be used as the proper shipping name, as appropriate.
(3) The word ``poison'' or ``poisonous'' may be used interchangeably
with the word ``toxic'' when only domestic transportation is involved.
The abbreviation ``n.o.i.'' or ``n.o.i.b.n.'' may be used
interchangeably with ``n.o.s.''.
(4) Except for hazardous wastes, when qualifying words are used as
part of the proper shipping name, their sequence in the package markings
and shipping paper description is optional. However, the entry in the
Table reflects the preferred sequence.
(5) When one entry references another entry by use of the word
``see'', if both names are in Roman type, either name may be used as the
proper shipping name (e.g., Ethyl alcohol, see Ethanol).
(6) When a proper shipping name includes a concentration range as
part of
[[Page 118]]
the shipping description, the actual concentration, if it is within the
range stated, may be used in place of the concentration range. For
example, an aqueous solution of hydrogen peroxide containing 30 percent
peroxide may be described as ``Hydrogen peroxide, aqueous solution with
not less than 20 percent but not more than 40 percent hydrogen
peroxide'' or ``Hydrogen peroxide, aqueous solution with 30 percent
hydrogen peroxide''.
(7) Use of the prefix ``mono'' is optional in any shipping name,
when appropriate. Thus, Iodine monochloride may be used interchangeably
with Iodine chloride. In ``Glycerol alpha-monochlorohydrin'' the term
``mono'' is considered a prefix to the term ``chlorohydrin'' and may be
deleted.
(8) Use of the word ``liquid'' or ``solid''. The word ``liquid'' or
``solid'' may be added to a proper shipping name when a hazardous
material specifically listed by name may, due to differing physical
states, be a liquid or solid. When the packaging specified in Column 8
is inappropriate for the physical state of the material, the table
provided in paragraph (i)(4) of this section should be used to determine
the appropriate packaging section.
(9) Hazardous wastes. If the word ``waste'' is not included in the
hazardous material description in Column 2 of the Table, the proper
shipping name for a hazardous waste (as defined in Sec. 171.8 of this
subchapter), shall include the word ``Waste'' preceding the proper
shipping name of the material. For example: Waste acetone.
(10) Mixtures and solutions. (i) A mixture or solution not
identified specifically by name, comprised of a hazardous material
identified in the Table by technical name and non-hazardous material,
shall be described using the proper shipping name of the hazardous
material and the qualifying word ``mixture'' or ``solution'', as
appropriate, unless--
(A) Except as provided in Sec. 172.101(i)(4) the packaging
specified in Column 8 is inappropriate to the physical state of the
material;
(B) The shipping description indicates that the proper shipping name
applies only to the pure or technically pure hazardous material;
(C) The hazard class, packing group, or subsidiary hazard of the
mixture or solution is different from that specified for the entry;
(D) There is a significant change in the measures to be taken in
emergencies;
(E) The material is identified by special provision in Column 7 of
the Sec. 172.101 Table as a material poisonous by inhalation; however,
it no longer meets the definition of poisonous by inhalation or it falls
within a different hazard zone than that specified in the special
provision; or
(F) The material can be appropriately described by a shipping name
that describes its intended application, such as ``Coating solution'',
``Extracts, flavoring'' or ``Compound, cleaning liquid''.
(ii) If one or more of the conditions specified in paragraph
(c)(10)(i) of this section is satisfied, then a proper shipping name
shall be selected as prescribed in paragraph (c)(12)(ii) of this
section.
(iii) A mixture or solution not identified in the Table specifically
by name, comprised of two or more hazardous materials in the same hazard
class, shall be described using an appropriate shipping description
(e.g., ``Flammable liquid, n.o.s.''). The name that most appropriately
describes the material shall be used; e.g., an alcohol not listed by its
technical name in the Table shall be described as ``Alcohol, n.o.s.''
rather than ``Flammable liquid, n.o.s.''. Some mixtures may be more
appropriately described according to their application, such as
``Coating solution'' or ``Extracts, flavoring liquid'' rather than by an
n.o.s. entry. Under the provisions of subparts C and D of this part, the
technical names of at least two components most predominately
contributing to the hazards of the mixture or solution may be required
in association with the proper shipping name.
(11) Except for a material subject to or prohibited by Sec. 173.21,
173.54, 173.56(d), 173.56(e), 173.224(c) or 173.225(b) of this
subchapter, a material that is considered to be a hazardous waste or a
sample of a material for which the hazard class is uncertain and must be
determined by testing may be assigned a tentative proper shipping name,
hazard
[[Page 119]]
class, identification number and packing group, if applicable, based on
the shipper's tentative determination according to:
(i) Defining criteria in this subchapter;
(ii) The hazard precedence prescribed in Sec. 173.2a of this
subchapter;
(iii) The shipper's knowledge of the material;
(iv) In addition to paragraphs (c)(11)(i) through (iii) of this
section, for a sample of a material other than a waste, the following
must be met:
(A) Except when the word ``Sample'' already appears in the proper
shipping name, the word ``Sample'' must appear as part of the proper
shipping name or in association with the basic description on the
shipping paper.
(B) When the proper shipping description for a sample is assigned a
``G'' in Column (1) of the Sec. 172.101 Table, and the primary
constituent(s) for which the tentative classification is based are not
known, the provisions requiring a technical name for the constituent(s)
do not apply; and
(C) A sample must be transported in a combination packaging that
conforms to the requirements of this subchapter that are applicable to
the tentative packing group assigned, and may not exceed a net mass of
2.5 kg (5.5 pounds) per package.
Note to paragraph (c)(11): For the transportation of self-reactive,
organic peroxide and explosive samples, see Sec. Sec. 173.224(c)(3),
173.225(b)(2) and 173.56(d) of this subchapter, respectively.
(12) Except when the proper shipping name in the Table is preceded
by a plus (+)--
(i) If it is specifically determined that a material meets the
definition of a hazard class, packing group or hazard zone, other than
the class, packing group or hazard zone shown in association with the
proper shipping name, or does not meet the defining criteria for a
subsidiary hazard shown in Column 6 of the Table, the material shall be
described by an appropriate proper shipping name listed in association
with the correct hazard class, packing group, hazard zone, or subsidiary
hazard for the material.
(ii) Generic or n.o.s. descriptions. If an appropriate technical
name is not shown in the Table, selection of a proper shipping name
shall be made from the generic or n.o.s. descriptions corresponding to
the specific hazard class, packing group, hazard zone, or subsidiary
hazard, if any, for the material. The name that most appropriately
describes the material shall be used; e.g., an alcohol not listed by its
technical name in the Table shall be described as ``Alcohol, n.o.s.''
rather than ``Flammable liquid, n.o.s.''. Some mixtures may be more
appropriately described according to their application, such as
``Coating solution'' or ``Extracts, flavoring, liquid'', rather than by
an n.o.s. entry, such as ``Flammable liquid, n.o.s.'' It should be
noted, however, that an n.o.s. description as a proper shipping name may
not provide sufficient information for shipping papers and package
markings. Under the provisions of subparts C and D of this part, the
technical name of one or more constituents which makes the product a
hazardous material may be required in association with the proper
shipping name.
(iii) Multiple hazard materials. If a material meets the definition
of more than one hazard class, and is not identified in the Table
specifically by name (e.g., acetyl chloride), the hazard class of the
material shall be determined by using the precedence specified in Sec.
173.2a of this subchapter, and an appropriate shipping description
(e.g., ``Flammable liquid, corrosive n.o.s.'') shall be selected as
described in paragraph (c)(12)(ii) of this section.
(iv) If it is specifically determined that a material is not a
forbidden material and does not meet the definition of any hazard class,
the material is not a hazardous material.
(13) Self-reactive materials and organic peroxides. A generic proper
shipping name for a self-reactive material or an organic peroxide, as
listed in Column 2 of the Table, must be selected based on the
material's technical name and concentration, in accordance with the
provisions of Sec. Sec. 173.224 or 173.225 of this subchapter,
respectively.
(14) A proper shipping name that describes all isomers of a material
may be used to identify any isomer of that material if the isomer meets
criteria for the same hazard class or division,
[[Page 120]]
subsidiary risk(s) and packing group, unless the isomer is specifically
identified in the Table.
(15) Unless a hydrate is specifically listed in the Table, a proper
shipping name for the equivalent anhydrous substance may be used, if the
hydrate meets the same hazard class or division, subsidiary risk(s) and
packing group.
(16) Unless it is already included in the proper shipping name in
the Sec. 172.101 Table, the qualifying words ``liquid'' or ``solid''
may be added in association with the proper shipping name when a
hazardous material specifically listed by name in the Sec. 172.101
Table may, due to the differing physical states of the various isomers
of the material, be either a liquid or a solid (for example
``Dinitrotoluenes, liquid'' and ``Dinitrotoluenes, solid''). Use of the
words ``liquid'' or ``solid'' is subject to the limitations specified
for the use of the words ``mixture'' or ``solution'' in paragraph
(c)(10) of this section. The qualifying word ``molten'' may be added in
association with the proper shipping name when a hazardous material,
which is a solid in accordance with the definition in Sec. 171.8 of
this subchapter, is offered for transportation in the molten state (for
example, ``Alkylphenols, solid, n.o.s., molten'').
(d) Column 3: Hazard class or Division. Column 3 contains a
designation of the hazard class or division corresponding to each proper
shipping name, or the word ``Forbidden''.
(1) A material for which the entry in this column is ``Forbidden''
may not be offered for transportation or transported. This prohibition
does not apply if the material is diluted, stabilized or incorporated in
a device and it is classed in accordance with the definitions of
hazardous materials contained in part 173 of this subchapter.
(2) When a reevaluation of test data or new data indicates a need to
modify the ``Forbidden'' designation or the hazard class or packing
group specified for a material specifically identified in the Table,
this data should be submitted to the Associate Administrator.
(3) A basic description of each hazard class and the section
reference for class definitions appear in Sec. 173.2 of this
subchapter.
(4) When an entry in this column reads ``Comb liq'', the material is
assigned to the hazard class ``Combustible liquid.'' Additionally, each
reference to a Class 3 material is modified to read ``Combustible
liquid'' when that material is reclassified in accordance with Sec.
173.150 (e) or (f) of this subchapter or has a flash point above 60.5
[deg]C (141 [deg]F) but below 93 [deg]C (200 [deg]F).
(e) Column 4: Identification number. Column 4 lists the
identification number assigned to each proper shipping name. Those
preceded by the letters ``UN'' are associated with proper shipping names
considered appropriate for international transportation as well as
domestic transportation. Those preceded by the letters ``NA'' are
associated with proper shipping names not recognized for international
transportation, except to and from Canada. Identification numbers in the
``NA9000'' series are associated with proper shipping names not
appropriately covered by international hazardous materials (dangerous
goods) transportation standards, or not appropriately addressed by
international transportation standards for emergency response
information purposes, except for transportation between the United
States and Canada.
(f) Column 5: Packing group. Column 5 specifies one or more packing
groups assigned to a material corresponding to the proper shipping name
and hazard class for that material. Class 2, Class 7, Division 6.2
(other than regulated medical wastes), and ORM-D materials, do not have
packing groups. Packing Groups I, II and III indicate the degree of
danger presented by the material is either great, medium or minor,
respectively. If more than one packing group is indicated for an entry,
the packing group for the hazardous material is determined using the
criteria for assignment of packing groups specified in subpart D of part
173. When a reevaluation of test data or new data indicates a need to
modify the specified packing group(s), the data should be submitted to
the Associate Administrator. Each reference in this column to a material
which is a hazardous waste or a hazardous substance, and whose proper
shipping name is preceded in Column 1 of the Table by the letter ``A''
or ``W'',
[[Page 121]]
is modified to read ``III'' on those occasions when the material is
offered for transportation or transported by a mode in which its
transportation is not otherwise subject to requirements of this
subchapter.
(g) Column 6: Labels. Column 6 specifies codes which represent the
hazard warning labels required for a package filled with a material
conforming to the associated hazard class and proper shipping name,
unless the package is otherwise excepted from labeling by a provision in
subpart E of this part, or part 173 of this subchapter. The first code
is indicative of the primary hazard of the material. Additional label
codes are indicative of subsidiary hazards. Provisions in Sec. 172.402
may require that a label other than that specified in Column 6 be
affixed to the package in addition to that specified in Column 6. No
label is required for a material classed as a combustible liquid or for
a Class 3 material that is reclassed as a combustible liquid. For
``Empty'' label requirements, see Sec. 173.428 of this subchapter. The
codes contained in Column 6 are defined according to the following
table:
Label Substitution Table
------------------------------------------------------------------------
Label code Label name
------------------------------------------------------------------------
1......................................... Explosive
1.1 \1\................................... Explosive 1.1\1\
1.2 \1\................................... Explosive 1.2\1\
1.3 \1\................................... Explosive 1.3\1\
1.4 \1\................................... Explosive 1.4\1\
1.5 \1\................................... Explosive 1.5\1\
1.6 \1\................................... Explosive 1.6\1\
2.1....................................... Flammable Gas
2.2....................................... Non-Flammable Gas
2.3....................................... Poison Gas
3......................................... Flammable Liquid
4.1....................................... Flammable Solid
4.2....................................... Spontaneously Combustible
4.3....................................... Dangerous When Wet
5.1....................................... Oxidizer
5.2....................................... Organic Peroxide
6.1 (inhalation hazard, Zone A or B)...... Poison Inhalation Hazard
6.1 (other than inhalation hazard, Zone A Poison
or B) \2\.
6.2....................................... Infectious substance
7......................................... Radioactive
8......................................... Corrosive
9......................................... Class 9
------------------------------------------------------------------------
\1\ Refers to the appropriate compatibility group letter.
\2\ The packing group for a material is indicated in column 5 of the
table.
(h) Column 7: Special provisions. Column 7 specifies codes for
special provisions applicable to hazardous materials. When Column 7
refers to a special provision for a hazardous material, the meaning and
requirements of that special provision are as set forth in Sec. 172.102
of this subpart.
(i) Column 8: Packaging authorizations. Columns 8A, 8B and 8C
specify the applicable sections for exceptions, non-bulk packaging
requirements and bulk packaging requirements, respectively, in part 173
of this subchapter. Columns 8A, 8B and 8C are completed in a manner
which indicates that ``Sec. 173.'' precedes the designated numerical
entry. For example, the entry ``202'' in Column 8B associated with the
proper shipping name ``Gasoline'' indicates that for this material
conformance to non-bulk packaging requirements prescribed in Sec.
173.202 of this subchapter is required. When packaging requirements are
specified, they are in addition to the standard requirements for all
packagings prescribed in Sec. 173.24 of this subchapter and any other
applicable requirements in subparts A and B of part 173 of this
subchapter.
(1) Exceptions. Column 8A contains exceptions from some of the
requirements of this subchapter. The referenced exceptions are in
addition to those specified in subpart A of part 173 and elsewhere in
this subchapter. A ``None'' in this column means no packaging exceptions
are authorized, except as may be provided by special provisions in
Column 7.
(2) Non-bulk packaging. Column 8B references the section in part 173
of this subchapter which prescribes packaging requirements for non-bulk
packagings. A ``None'' in this column means non-bulk packagings are not
authorized, except as may be provided by special provisions in Column 7.
Each reference in this column to a material which is a hazardous waste
or a hazardous substance, and whose proper shipping name is preceded in
Column 1 of the Table by the letter ``A'' or ``W'', is modified to
include ``Sec. 173.203'' or ``Sec. 173.213'', as appropriate for
liquids and solids, respectively, on those occasions when the material
is offered for transportation or transported by a mode in which its
transportation is not otherwise subject to the requirements of this
subchapter.
[[Page 122]]
(3) Bulk packaging. Column (8C) specifies the section in part 173 of
this subchapter that prescribes packaging requirements for bulk
packagings, subject to the limitations, requirements, and additional
authorizations of Columns (7) and (8B). A ``None'' in Column (8C) means
bulk packagings are not authorized, except as may be provided by special
provisions in Column (7) and in packaging authorizations Column (8B).
Additional authorizations and limitations for use of UN portable tanks
are set forth in Column 7. For each reference in this column to a
material that is a hazardous waste or a hazardous substance, and whose
proper shipping name is preceded in Column 1 of the Table by the letter
``A'' or ``W'' and that is offered for transportation or transported by
a mode in which its transportation is not otherwise subject to the
requirements of this subchapter:
(4) For a hazardous material which is specifically named in the
Table and whose packaging sections specify packagings not applicable to
the form of the material (e.g., packaging specified is for solid
material and the material is being offered for transportation in a
liquid form) the following table should be used to determine the
appropriate packaging section:
------------------------------------------------------------------------
Corresponding packaging
Packaging section reference for solid materials section for liquid
materials
------------------------------------------------------------------------
Sec. 173.187................................. Sec. 173.181
Sec. 173.211................................. Sec. 173.201
Sec. 173.212................................. Sec. 173.202
Sec. 173.213................................. Sec. 173.203
Sec. 173.240................................. Sec. 173.241
Sec. 173.242................................. Sec. 173.243
------------------------------------------------------------------------
(5) Cylinders. For cylinders, both non-bulk and bulk packaging
authorizations are set forth in Column (8B). Notwithstanding a
designation of ``None'' in Column (8C), a bulk cylinder may be used when
specified through the section reference in Column (8B).
(j) Column 9: Quantity limitations. Columns 9A and 9B specify the
maximum quantities that may be offered for transportation in one package
by passenger-carrying aircraft or passenger-carrying rail car (Column
9A) or by cargo aircraft only (Column 9B), subject to the following:
(1) ``Forbidden'' means the material may not be offered for
transportation or transported in the applicable mode of transport.
(2) The quantity limitation is ``net'' except where otherwise
specified, such as for ``Consumer commodity'' which specifies ``30 kg
gross.''
(3) When articles or devices are specifically listed by name, the
net quantity limitation applies to the entire article or device (less
packaging and packaging materials) rather than only to its hazardous
components.
(4) A package offered or intended for transportation by aircraft and
which is filled with a material forbidden on passenger-carrying aircraft
but permitted on cargo aircraft only, or which exceeds the maximum net
quantity authorized on passenger-carrying aircraft, shall be labelled
with the CARGO AIRCRAFT ONLY label specified in Sec. 172.448 of this
part.
(5) The total net quantity of hazardous material for an outer non-
bulk packaging that contains more than one hazardous material may not
exceed the lowest permitted maximum net quantity per package as shown in
Column 9A or 9B, as appropriate. If one material is a liquid and one is
a solid, the maximum net quantity must be calculated in kilograms. See
Sec. 173.24a(c)(1)(iv).
(k) Column 10: Vessel stowage requirements. Column 10A [Vessel
stowage] specifies the authorized stowage locations on board cargo and
passenger vessels. Column 10B [Other provisions] specifies codes for
stowage requirements for specific hazardous materials. The meaning of
each code in Column 10B is set forth in Sec. 176.84 of this subchapter.
Section 176.63 of this subchapter sets forth the physical requirements
for each of the authorized locations listed in Column 10A. (For bulk
transportation by vessel, see 46 CFR parts 30 to 40, 70, 98, 148, 151,
153 and 154.) The authorized stowage locations specified in Column 10A
are defined as follows:
(1) Stowage category ``A'' means the material may be stowed ``on
deck'' or ``under deck'' on a cargo vessel and on a passenger vessel.
(2) Stowage category ``B'' means--
(i) The material may be stowed ``on deck'' or ``under deck'' on a
cargo vessel and on a passenger vessel carrying
[[Page 123]]
a number of passengers limited to not more than the larger of 25
passengers, or one passenger per each 3 m of overall vessel length; and
(ii) ``On deck only'' on passenger vessels in which the number of
passengers specified in paragraph (k)(2)(i) of this section is exceeded.
(3) Stowage category ``C'' means the material must be stowed ``on
deck only'' on a cargo vessel and on a passenger vessel.
(4) Stowage category ``D'' means the material must be stowed ``on
deck only'' on a cargo vessel and on a passenger vessel carrying a
number of passengers limited to not more than the larger of 25
passengers or one passenger per each 3 m of overall vessel length, but
the material is prohibited on passenger vessels in which the limiting
number of passengers is exceeded.
(5) Stowage category ``E'' means the material may be stowed ``on
deck'' or ``under deck'' on a cargo vessel and on a passenger vessel
carrying a number of passengers limited to not more than the larger of
25 passengers, or one passenger per each 3 m of overall vessel length,
but is prohibited from carriage on passenger vessels in which the
limiting number of passengers is exceeded.
(6) Stowage category ``01'' means the material may be stowed ``on
deck'' or ``under deck'' on a cargo vessel (up to 12 passengers) and on
a passenger vessel.
(7) Stowage category ``02'' means the material may be stowed ``on
deck'' or ``under deck'' on a cargo vessel (up to 12 passengers) and
``on deck'' in closed cargo transport units or ``under deck'' in closed
cargo transport units on a passenger vessel.
(8) Stowage category ``03'' means the material may be stowed ``on
deck'' or ``under deck'' on a cargo vessel (up to 12 passengers) and
``on deck'' in closed cargo transport units on a passenger vessel.
(9) Stowage category ``04'' means the material may be stowed ``on
deck'' or ``under deck'' on a cargo vessel (up to 12 passengers) but the
material is prohibited on a passenger vessel.
(10) Stowage category ``05'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' on a cargo
vessel (up to 12 passengers) and on a passenger vessel.
(11) Stowage category ``06'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' on a cargo
vessel (up to 12 passengers) and ``on deck'' in closed cargo transport
units or ``under deck'' in closed cargo transport units on a passenger
vessel.
(12) Stowage category ``07'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' on a cargo
vessel (up to 12 passengers) and ``on deck'' only in closed cargo
transport units on a passenger vessel.
(13) Stowage category ``08'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' on a cargo
vessel (up to 12 passengers) but the material is prohibited on a
passenger vessel.
(14) Stowage category ``09'' means the material may be stowed ``on
deck only'' in closed cargo transport units or ``under deck'' in closed
cargo transport units on a cargo vessel (up to 12 passengers) and on a
passenger vessel.
(15) Stowage category ``10'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' in closed cargo
transport units on a cargo vessel (up to 12 passengers) and ``on deck''
only in closed cargo transport units on a passenger vessel.
(16) Stowage category ``11'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' in magazine
stowage type ``c'' on a cargo vessel (up to 12 passengers) and ``on
deck'' only in closed cargo transport units on a passenger vessel.
(17) Stowage category ``12'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' in magazine
stowage type ``c'' on a cargo vessel (up to 12 passengers) but the
material is prohibited on a passenger vessel.
(18) Stowage category ``13'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' in magazine
stowage type ``A'' on a cargo vessel (up to 12 passengers) and ``on
deck'' only in closed cargo transport units on a passenger vessel.
(19) Stowage category ``14'' means the material may be stowed ``on
deck'' in
[[Page 124]]
closed cargo transport units on a cargo vessel (up to 12 passengers) but
the material is prohibited on a passenger vessel.
(20) Stowage category ``15'' means the material may be stowed ``on
deck'' in closed cargo transport units or ``under deck'' in closed cargo
transport units on a cargo vessel (up to 12 passengers) but the material
is prohibited on a passenger vessel.
(l) Changes to the Table. (1) Unless specifically stated otherwise
in a rule document published in the Federal Register amending the
Table--
(i) Such a change does not apply to the shipment of any package
filled prior to the effective date of the amendment; and
(ii) Stocks of preprinted shipping papers and package markings may
be continued in use, in the manner previously authorized, until depleted
or for a one-year period, subsequent to the effective date of the
amendment, whichever is less.
(2) Except as otherwise provided in this section, any alteration of
a shipping description or associated entry which is listed in the Sec.
172.101 Table must receive prior written approval from the Associate
Administrator.
(3) The proper shipping name of a hazardous material changed in the
May 6, 1997 final rule, in effect on October 1, 1997, only by the
addition or omission of the word ``compressed,'' ``inhibited,''
``liquefied'' or ``solution'' may continue to be used to comply with
package marking requirements, until January 1, 2003.
[[Page 125]]
Sec. 172.101 Hazardous Materials Table
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
(8) Packaging (Sec. 173.***) (9) Quantity (10) Vessel stowage
Hazardous materials ------------------------------------------ limitations ----------------------
descriptions and Hazard Identification Label Special --------------------------
Symbols proper shipping class or Numbers PG Codes provisions (Sec. Passenger
names Division 172.102) Exceptions Non-bulk Bulk aircraft/ Cargo air- Location Other
rail craft only
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
(1) (2)................. (3) (4) (5) (6)....... (7) (8A).......... (8B)....... (8C)....... (9A) (9B) (10A) (10B)
--------
Accellerene, see p- ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrosodimethylanil
ine.
Accumulators, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
electric, see
Batteries, wet etc.
Accumulators, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
pressurized,
pneumatic or
hydraulic
(containing non-
flamable gas), see
Articles
pressurized,
pneumatic or
hydraulic
(containing non-
flamable gas).
Acetal.............. 3 UN1088 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
Acetaldehyde........ 3 UN1089 I 3......... A3, B16, T11, None.......... 201........ 243........ Forbidden 30 L E .......
TP2, TP7
A Acetaldehyde ammonia 9 UN1841 III 9......... IB8, IP3, IP7, 155........... 204........ 240........ 200 kg 200 kg A 34
T1, TP33
Acetaldehyde oxime.. 3 UN2332 III 3......... B1, IB3, T4, TP1 150........... 203........ 242........ 60 L 220 L A .......
Acetic acid, glacial 8 UN2789 II 8, 3...... A3, A6, A7, A10, 154........... 202........ 243........ 1 L 30 L A .......
or Acetic acid B2, IB2, T7, TP2
solution, with more
than 80 percent
acid, by mass.
Acetic acid 8 UN2790 II 8......... A3, A6, A7, A10, 154........... 202........ 242........ 1 L 30 L A .......
solution, not less B2, IB2, T7, TP2
than 50 percent but
not more than 80
percent acid, by
mass.
Acetic acid 8 UN2790 III 8......... IB3, T4, TP1 154........... 203........ 242........ 5 L 60 L A .......
solution, with more
than 10 percent and
less than 50
percent acid, by
mass.
Acetic anhydride.... 8 UN1715 II 8, 3...... A3, A6, A7, A10, 154........... 202........ 243........ 1 L 30 L A 40
B2, IB2, T7, TP2
Acetone............. 3 UN1090 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Acetone cyanohydrin, 6.1 UN1541 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 25, 40,
stabilized. B76, B77, N34, 52, 53
T20, TP2, TP13,
TP38, TP45
Acetone oils........ 3 UN1091 II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8
Acetonitrile........ 3 UN1648 II 3......... IB2, T7, TP2 150........... 202........ 242........ 5 L 60 L B 40
Acetyl acetone Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxide with more
than 9 percent by
mass active oxygen.
[[Page 126]]
Acetyl benzoyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxide, solid, or
with more than 40
percent in solution.
Acetyl bromide...... 8 UN1716 II 8......... B2, IB2, T8, 154........... 202........ 242........ 1 L 30 L C 40
TP2, TP12
Acetyl chloride..... 3 UN1717 II 3, 8...... A3, A6, A7, IB1, 150........... 202........ 243........ 1 L 5 L B 40
N34, T8, TP2,
TP12
Acetyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
cyclohexanesulfonyl
peroxide, with more
than 82 percent
wetted with less
than 12 percent
water.
Acetyl iodide....... 8 UN1898 II 8......... B2, IB2, T7, 154........... 202........ 242........ 1 L 30 L C 40
TP2, TP13
Acetyl methyl 3 UN2621 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
carbinol.
Acetyl peroxide, Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solid, or with more
than 25 percent in
solution.
Acetylene, dissolved 2.1 UN1001 ....... 2.1....... ................ None.......... 303........ None....... Forbidden 15 kg D 25, 40,
57
Acetylene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(liquefied).
Acetylene silver Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrate.
Acetylene ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetrabromide, see
Tetrabromoethane.
Acid butyl ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
phosphate, see
Butyl acid
phosphate.
Acid, sludge, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Sludge acid.
Acridine............ 6.1 UN2713 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Acrolein dimer, 3 UN2607 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A 40
stabilized.
Acrolein, stabilized 6.1 UN1092 I 6.1, 3.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
B42, B72, B77,
T22, TP2, TP7,
TP13, TP38, TP44
Acrylamide, solid... 6.1 UN2074 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 12
TP33
Acrylamide solution. 6.1 UN3426 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 12
Acrylic acid, 8 UN2218 II 8, 3...... B2, IB2, T7, TP2 154........... 202........ 243........ 1 L 30 L C 25, 40
stabilized.
[[Page 127]]
Acrylonitrile, 3 UN1093 I 3, 6.1.... B9, T14, TP2, None.......... 201........ 243........ Forbidden 30 L E 40
stabilized. TP13
Actuating cartridge, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
explosive, see
Cartridges, power
device.
Adhesives, 3 UN1133 I 3......... B42, T11, TP1, 150........... 201........ 243........ 1 L 30 L B .......
containing a TP8, TP27
flammable liquid.
........... .................. II 3......... 149, B52, IB2, 150........... 173........ 242........ 5 L 60 L B .......
T4, TP1, TP8
........... .................. III 3......... B1, B52, IB3, 150........... 173........ 242........ 60 L 220 L A .......
T2, TP1
Adiponitrile........ 6.1 UN2205 III 6.1....... IB3, T3, TP1 153........... 203........ 241........ 60 L 220 L A .......
Aerosols, corrosive, 2.2 UN1950 ....... 2.2, 8.... A34 306........... None....... None....... 75 kg 150 kg A 48, 87,
Packing Group II or 126
III, (each not
exceeding 1 L
capacity).
Aerosols, flammable, 2.1 UN1950 ....... 2.1....... N82 306........... None....... None....... 75 kg 150 kg A 48, 87,
(each not exceeding 126
1 L capacity).
Aerosols, flammable, 2.1 UN1950 ....... 2.1....... N82 306........... 304........ None....... Forbidden 150 kg A 48, 87,
n.o.s. (engine 126
starting fluid)
(each not exceeding
1 L capacity).
Aerosols, non- 2.2 UN1950 ....... 2.2....... ................ 306........... None....... None....... 75 kg 150 kg 48, 87,
flammable, (each 126
not exceeding 1 L
capacity).
Aerosols, poison, 2.2 UN1950 ....... 2.2, 6.1.. ................ 306........... None....... None....... Forbidden Forbidden A 48, 87,
(each not exceeding 126
1 L capacity).
I Air bag inflators, 1.4G UN0503 II 1.4G...... 161 None.......... 62......... None....... Forbidden 75 kg 02 .......
or Air bag modules,
or Seat-belt
pretensioners..
Air bag inflators, 9 UN3268 III 9......... 160 166........... 166........ 166........ 25 kg 100 kg A .......
or Air bag modules,
or Seat-belt
pretensioners..
Air, compressed..... 2.2 UN1002 ....... 2.2....... 78 306........... 302........ 302........ 75 kg 150 kg A .......
Air, refrigerated 2.2 UN1003 ....... 2.2, 5.1.. T75, TP5, TP22 320........... 316........ 318, 319... Forbidden 150 kg D 51
liquid, (cryogenic
liquid).
Air, refrigerated 2.2 UN1003 ....... 2.2, 5.1.. T75, TP5, TP22 320........... 316........ 318, 319... Forbidden Forbidden D 51
liquid, (cryogenic
liquid) non-
pressurized.
Aircraft engines ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(including
turbines), see
Engines, internal
combustion.
Aircraft evacuation ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
slides, see Life
saving appliances
etc.
Aircraft hydraulic 3 UN3165 I 3, 6.1, 8. ................ None.......... 172........ None....... Forbidden 42 L E .......
power unit fuel
tank (containing a
mixture of
anhydrous hydrazine
and monomethyl
hydrazine) (M86
fuel).
Aircraft survival ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
kits, see Life
saving appliances
etc.
G Alcoholates 3 UN3274 II 3, 8...... IB2 150........... 202........ 243........ 1 L 5 L B .......
solution, n.o.s.,
in alcohol.
Alcoholic beverages. 3 UN3065 II 3......... 24, 149, B1, 150........... 202........ 242........ 5 L 60 L A .......
IB2, T4, TP1
[[Page 128]]
.................... ........... .................. III 3......... 24, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
N11, T2, TP1
Alcohols, n.o.s..... 3 UN1987 I 3......... 172, T11, TP1, None.......... 201........ 243........ 1 L 30 L E
TP8, TP27
II 3......... 172, 1B2, T7, 150........... 202........ 242........ 5 L 60 L B
TP1, TP8, TP28
III 3......... 172, B1, IB3, 150........... 203........ 242........ 60 L 220 L A
T4, TP1, TP29
G Alcohols, flammable, 3 UN1986 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L E 40
toxic n.o.s. TP27
II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP27
III 3, 6.1.... B1, IB3, T7, 150........... 203........ 242........ 60 L 220 L A .......
TP1, TP28
Aldehydes, n.o.s.... 3 UN1989 I 3......... T11, TP1, TP27 None.......... 201........ 243........ 1 L 30 L E .......
.................... ........... .................. II 3......... IB2, T7, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8, TP28
.................... ........... .................. III 3......... B1, IB3, T4, 150........... 203........ 242........ 60 L 220 L A .......
TP1, TP29
G Aldehydes, 3 UN1988 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L E 40
flammable, toxic, TP27
n.o.s..
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP27
.................... ........... .................. III 3, 6.1.... B1, IB3, T7, 150........... 203........ 242........ 60 L 220 L A .......
TP1, TP28
Aldol............... 6.1 UN2839 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 12
G Alkali metal 4.2 UN3206 II 4.2, 8.... 64, A7, IB5, None.......... 212........ 242........ 15 kg 50 kg B .......
alcoholates, self- IP2, T3, TP33
heating, corrosive,
n.o.s..
.................... ........... .................. III 4.2, 8.... 64, A7, IB8, None.......... 213........ 242........ 25 kg 100 kg B .......
IP3, T1, TP33
Alkali metal alloys, 4.3 UN1421 I 4.3....... A2, A3, A7, B48, None.......... 201........ 244........ Forbidden 1 L D 52
liquid, n.o.s.. N34
Alkali metal 4.3 UN1389 I 4.3....... A2, A3, A7, N34 None.......... 201........ 244........ Forbidden 1 L D 40, 52
amalgam, liquid.
Alkali metal 4.3 UN3401 I 4.3....... IB4, IP1, N40, None.......... 211........ 242........ Forbidden 15 kg D 52
amalgam, solid. T9, TP7, TP33
Alkali metal amides. 4.3 UN1390 II 4.3....... A6, A7, A8, A19, 151........... 212........ 241........ 15 kg 50 kg E 40, 52
A20, IB7, IP2,
T3, TP33
[[Page 129]]
Alkali metal 4.3 UN1391 I 4.3....... A2, A3, A7 None.......... 201........ 244........ Forbidden 1 L D 52
dispersions, or
Alkaline earth
metal dispersions.
Alkaline corrosive ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
liquids, n.o.s.,
see Caustic alkali
liquids, n.o.s..
G Alkaline earth metal 4.2 UN3205 II 4.2....... 65, A7, IB6, None.......... 212........ 241........ 15 kg 50 kg B .......
alcoholates, n.o.s.. IP2, T3, TP33
.................... ........... .................. III 4.2....... 65, A7, IB8, None.......... 213........ 241........ 25 kg 100 kg B .......
IP3, T1, TP33
Alkaline earth metal 4.3 UN1393 II 4.3....... A19, IB7, IP2, 151........... 212........ 241........ 15 kg 50 kg E 52
alloys, n.o.s.. T3, TP33
Alkaline earth metal 4.3 UN1392 I 4.3....... A19, N34, N40 None.......... 201........ 244........ Forbidden 1 L E 40, 52
amalgams, liquid.
Alkaline earth metal 4.3 UN3402 I 4.3....... A19, N34, N40, None.......... 211........ 242........ Forbidden 15 kg D 52
amalgams, solid. T9, TP7, TP33
G Alkaloids, liquid, 6.1 UN3140 I 6.1....... A4, T14, TP2, None.......... 201........ 243........ 1 L 30 L A .......
n.o.s., or Alkaloid TP27
salts, liquid,
n.o.s..
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L A .......
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A .......
TP28
G Alkaloids, solid, 6.1 UN1544 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A .......
n.o.s. or Alkaloid TP33
salts, solid,
n.o.s. poisonous.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Alkyl sulfonic 8 UN2584 II 8......... B2, IB2, T8, 154........... 202........ 242........ 1 L 30 L B .......
acids, liquid or TP2, TP12, TP13
Aryl sulfonic
acids, liquid with
more than 5 percent
free sulfuric acid.
Alkyl sulfonic 8 UN2586 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L B .......
acids, liquid or
Aryl sulfonic
acids, liquid with
not more than 5
percent free
sulfuric acid.
Alkyl sulfonic 8 UN2583 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A .......
acids, solid or T3, TP33
Aryl sulfonic
acids, solid, with
more than 5 percent
free sulfuric acid.
Alkyl sulfonic 8 UN2585 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
acids, solid or TP33
Aryl sulfonic
acids, solid with
not more than 5
percent free
sulfuric acid.
Alkylphenols, 8 UN3145 I 8......... A6, T14, TP2 None.......... 201........ 243........ 0.5 L 2.5 L B .......
liquid, n.o.s.
(including C2-C12
homologues).
.................... ........... .................. II 8......... IB2, T11, TP2, 154........... 202........ 242........ 1 L 30 L B .......
TP27
.................... ........... .................. III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A .......
TP28
[[Page 130]]
Alkylphenols, solid, 8 UN2430 I 8......... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 25 kg B .......
n.o.s. (including TP33
C2-C12 homologues).
.................... ........... .................. II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg B .......
T3, TP33
.................... ........... .................. III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
TP33
Alkylsulfuric acids. 8 UN2571 II 8......... B2, IB2, T8, 154........... 202........ 242........ 1 L 30 L C 14
TP2, TP12, TP13,
TP28
Allethrin, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Pesticides, liquid,
toxic, n.o.s..
Allyl acetate....... 3 UN2333 II 3, 6.1.... IB2, T7, TP1, 150........... 202........ 243........ 1 L 60 L E 40
TP13
Allyl alcohol....... 6.1 UN1098 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, B77, T20,
TP2, TP13, TP38,
TP45
Allyl bromide....... 3 UN1099 I 3, 6.1.... T14, TP2, TP13 None.......... 201........ 243........ Forbidden 30 L B 40
Allyl chloride...... 3 UN1100 I 3, 6.1.... T14, TP2, TP13 None.......... 201........ 243........ Forbidden 30 L E 40
Allyl ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
chlorocarbonate,
see Allyl
chloroformate.
Allyl chloroformate. 6.1 UN1722 I 6.1, 3, 8. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, N41, T20,
TP2, TP13, TP38,
TP45
Allyl ethyl ether... 3 UN2335 II 3, 6.1.... IB2, T7, TP1, 150........... 202........ 243........ 1 L 60 L E 40
TP13
Allyl formate....... 3 UN2336 I 3, 6.1.... T14, TP2, TP13 None.......... 201........ 243........ Forbidden 30 L E 40
Allyl glycidyl ether 3 UN2219 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Allyl iodide........ 3 UN1723 II 3, 8...... A3, A6, IB1, 150........... 202........ 243........ 1 L 5 L B 40
N34, T7, TP2,
TP13
Allyl 6.1 UN1545 II 6.1, 3.... A3, A7, IB2, T7, None.......... 202........ 243........ Forbidden 60 L D 40
isothiocyanate, TP2
stabilized.
Allylamine.......... 6.1 UN2334 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, T20, TP2,
TP13, TP38, TP45
[[Page 131]]
Allyltrichlorosilane 8 UN1724 II 8, 3...... A7, B2, B6, IB2, None.......... 202........ 243........ Forbidden 30 L C 40
, stabilized. N34, T7, TP2,
TP13
Aluminum alkyl 4.2 UN3052 I 4.2, 4.3.. 173, B9, B11, None.......... 181........ 244........ Forbidden Forbidden D 134
halides, liquid. T21, TP2, TP7
Aluminum alkyl 4.2 UN3461 I 4.2, 4.3.. 173, T21, TP7, None.......... 181........ 244........ Forbidden Forbidden D 134
halides, solid. TP33
Aluminum alkyl 4.2 UN3076 I 4.2, 4.3.. 173, B9, B11, None.......... 181........ 244........ Forbidden Forbidden D .......
hydrides. T21, TP2, TP7
Aluminum alkyls..... 4.2 UN3051 I 4.2, 4.3.. 173, B9, B11, None.......... 181........ 244........ Forbidden Forbidden D .......
T21, TP2, TP7
Aluminum borohydride 4.2 UN2870 I 4.2, 4.3.. B11, T21, TP7, None.......... 181........ 244........ Forbidden Forbidden D .......
or Aluminum TP33
borohydride in
devices.
Aluminum bromide, 8 UN1725 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 40
anhydrous. T3, TP33
Aluminum bromide, 8 UN2580 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
solution.
Aluminum carbide.... 4.3 UN1394 II 4.3....... A20, IB7, IP2, 151........... 212........ 242........ 15 kg 50 kg A 52
N41, T3, TP33
Aluminum chloride, 8 UN1726 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 40
anhydrous. T3, TP33
Aluminum chloride, 8 UN2581 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
solution.
Aluminum dross, wet Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
or hot.
Aluminum 4.3 UN1395 II 4.3, 6.1.. A19, IB5, IP2, 151........... 212........ 242........ 15 kg 50 kg A 39, 40,
ferrosilicon powder. T3, TP33 52, 53,
85, 103
.................... ........... .................. III 4.3, 6.1.. A19, A20, IB4 151........... 213........ 241........ 25 kg 100 kg A 39, 40,
52, 53,
85, 103
Aluminum hydride.... 4.3 UN2463 I 4.3....... A19, N40 None.......... 211........ 242........ Forbidden 15 kg E .......
D Aluminum, molten.... 9 NA9260 III 9......... IB3, T1, TP3 None.......... None....... 247........ Forbidden Forbidden D .......
Aluminum nitrate.... 5.1 UN1438 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
IP3, T1, TP33
Aluminum phosphate ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Corrosive liquids,
etc.
Aluminum phosphide.. 4.3 UN1397 I 4.3, 6.1.. A8, A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 40, 52,
85
Aluminum phosphide 6.1 UN3048 I 6.1....... A8, IB7, IP1, None.......... 211........ 242........ Forbidden 15 kg E 40, 85
pesticides. T6, TP33
Aluminum powder, 4.1 UN1309 II 4.1....... IB8, IP2, IP4, 151........... 212........ 240........ 15 kg 50 kg A 13, 39,
coated. T3, TP33 52, 53,
74, 101
.................... ........... .................. III 4.1....... IB8, IP3, T1, 151........... 213........ 240........ 25 kg 100 kg A 13, 39,
TP33 52, 53,
74, 101
Aluminum powder, 4.3 UN1396 II 4.3....... A19, A20, IB7, 151........... 212........ 242........ 15 kg 50 kg A 39, 52,
uncoated. IP2, T3, TP33 53
.................... ........... .................. III 4.3....... A19, A20, IB8, 151........... 213........ 241........ 25 kg 100 kg A 39, 52,
IP4, T1, TP33 53
Aluminum resinate... 4.1 UN2715 III 4.1....... IB6, T1, TP33 151........... 213........ 240........ 25 kg 100 kg A .......
[[Page 132]]
Aluminum silicon 4.3 UN1398 III 4.3....... A1, A19, IB8, 151........... 213........ 241........ 25 kg 100 kg A 39, 40,
powder, uncoated. IP4, T1, TP33 52, 53,
85, 103
Aluminum smelting by- 4.3 UN3170 II 4.3....... 128, B115, IB7, None.......... 212........ 242........ 15 kg 50 kg B 85, 103
products or IP2, T3, TP33
Aluminum remelting
by-products.
.................... ........... .................. III 4.3....... 128, B115, IB8, None.......... 213........ 241........ 25 kg 100 kg B 85, 103
IP4, T1, TP33
Amatols, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Explosives,
blasting, type B.
G Amines, flammable, 3 UN2733 I 3, 8...... T14, TP1, TP27 None.......... 201........ 243........ 0.5 L 2.5 L D 40
corrosive, n.o.s.
or Polyamines,
flammable,
corrosive, n.o.s..
.................... ........... .................. II 3, 8...... IB2, T11, TP1, 150........... 202........ 243........ 1 L 5 L B 40
TP27
.................... ........... .................. III 3, 8...... B1, IB3, T7, 150........... 203........ 242........ 5 L 60 L A 40
TP1, TP28
G Amines, liquid, 8 UN2734 I 8, 3...... A3, A6, N34, None.......... 201........ 243........ 0.5 L 2.5 L A 52
corrosive, T14, TP2, TP27
flammable, n.o.s.
or Polyamines,
liquid, corrosive,
flammable, n.o.s..
.................... ........... .................. II 8, 3...... IB2, T11, TP2, None.......... 202........ 243........ 1 L 30 L A 52
TP27
G Amines, liquid, 8 UN2735 I 8......... A3, A6, B10, None.......... 201........ 243........ 0.5 L 2.5 L A 52
corrosive, n.o.s., N34, T14, TP2,
or Polyamines, TP27
liquid, corrosive,
n.o.s..
.................... ........... .................. II 8......... B2, IB2, T11, 154........... 202........ 242........ 1 L 30 L A 52
TP1, TP27
.................... ........... .................. III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A 52
TP28
G Amines, solid, 8 UN3259 I 8......... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 25 kg A 52
corrosive, n.o.s., TP33
or Polyamines,
solid, corrosive
n.o.s..
.................... ........... .................. II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 52
T3, TP33
.................... ........... .................. III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 52
TP33
2-Amino-4- 6.1 UN2673 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
chlorophenol. T3, TP33
[[Page 133]]
2-Amino-5- 6.1 UN2946 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
diethylaminopentane.
2-Amino-4,6- 4.1 UN3317 I 4.1....... 23, A8, A19, None.......... 211........ None....... 1 kg 15 kg E 28, 36
Dinitrophenol, A20, N41
wetted with not
less than 20
percent water by
mass.
2-(2-Aminoethoxy) 8 UN3055 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
ethanol.
N- 8 UN2815 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A 12
Aminoethylpiperazin
e.
+ Aminophenols (o-; m- 6.1 UN2512 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
; p-). TP33
Aminopropyldiethanol ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
amine, see Amines,
etc.
n- ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Aminopropylmorpholi
ne, see Amines, etc.
Aminopyridines (o-; 6.1 UN2671 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 12, 40
m-; p-). T3, TP33
I Ammonia, anhydrous.. 2.3 UN1005 ....... 2.3, 8.... 4, T50 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 57
D Ammonia, anhydrous.. 2.2 UN1005 ....... 2.2....... 13, T50 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 57
D Ammonia solution, 2.2 UN3318 ....... 2.2....... 13, T50 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 57
relative density
less than 0.880 at
15 degrees C in
water, with more
than 50 percent
ammonia.
I Ammonia solution, 2.3 UN3318 ....... 2.3, 8.... 4, T50 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 57
relative density
less than 0.880 at
15 degrees C in
water, with more
than 50 percent
ammonia.
Ammonia solutions, 8 UN2672 III 8......... IB3, IP8, T7, 154........... 203........ 241........ 5 L 60 L A 40, 85
relative density TP1
between 0.880 and
0.957 at 15 degrees
C in water, with
more than 10
percent but not
more than 35
percent ammonia.
Ammonia solutions, 2.2 UN2073 ....... 2.2....... ................ 306........... 304........ 314, 315... Forbidden 150 kg E 40, 57
relative density
less than 0.880 at
15 degrees C in
water, with more
than 35 percent but
not more than 50
percent ammonia.
Ammonium arsenate... 6.1 UN1546 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 53
T3, TP33
Ammonium azide...... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ammonium bifluoride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solid, see Ammonium
hydrogen
difluoride, solid.
Ammonium bifluoride ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Ammonium hydrogen
difluoride,
solution.
Ammonium bromate.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ammonium chlorate... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ammonium dichromate. 5.1 UN1439 II 5.1....... IB8, IP2, IP4, 152........... 212........ 242........ 5 kg 25 kg A 52
T3, TP33
[[Page 134]]
Ammonium dinitro-o- 6.1 UN1843 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 36, 65,
cresolate, solid. T3, TP33 66, 77
Ammonium dinitro-o- 6.1 UN3424 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L B 36, 66,
cresolate solution. 78, 91
.................... ........... .................. III 6.1....... IB2, T7, TP2 153........... 203........ 241........ 60 L 220 L A 36, 66,
78, 91
Ammonium fluoride... 6.1 UN2505 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
TP33
Ammonium 6.1 UN2854 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
fluorosilicate. TP33
Ammonium fulminate.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ammonium hydrogen 8 UN2506 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 40
sulfate. T3, TP33
Ammonium 8 UN1727 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 25, 40,
hydrogendifluoride, N34, T3, TP33 52
solid.
Ammonium 8 UN2817 II 8, 6.1.... IB2, N34, T8, 154........... 202........ 243........ 1 L 30 L B 40
hydrogendifluoride, TP2, TP12, TP13
solution.
.................... ........... .................. III 8, 6.1.... IB3, N3, T4, 154........... 203........ 241........ 5 L 60 L B 40, 95
TP1, TP12, TP13
Ammonium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrosulfide,
solution, see
Ammonium sulfide
solution.
D Ammonium hydroxide, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ammonia
solutions, etc.
Ammonium 6.1 UN2859 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 44, 89,
metavanadate. T3, TP33 100,
141
Ammonium nitrate 5.1 UN2067 III 5.1....... 52, 150, IB8, 152........... 213........ 240........ 25 kg 100 kg B 48, 59,
based fertilizer. IP3, T1, TP33 60, 66,
117
A W Ammonium nitrate 9 UN2071 III 9......... 132, IB8, IP3 155........... 213........ 240........ 200 kg 200 kg A .......
based fertilizer.
Ammonium nitrate 5.1 UN3375 II 5.1....... 147, 163 None.......... 214........ 214........ Forbidden Forbidden D 48, 59,
emulsion or 60, 66,
Ammonium nitrate 124
suspension or
Ammonium nitrate
gel, intermediate
for blasting
explosives.
[[Page 135]]
D Ammonium nitrate- 1.5D NA0331 II 1.5D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 19E
fuel oil mixture
containing only
prilled ammonium
nitrate and fuel
oil.
Ammonium nitrate, 5.1 UN2426 ....... 5.1....... B5, T7 None.......... None....... 243........ Forbidden Forbidden D 59, 60
liquid (hot
concentrated
solution).
Ammonium nitrate, 1.1D UN0222 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 19E
with more than 0.2
percent combustible
substances,
including any
organic substance
calculated as
carbon, to the
exclusion of any
other added
substance.
Ammonium nitrate, 5.1 UN1942 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A 48, 59,
with not more than IP3, T1, TP33 60, 116
0.2% total
combustible
material, including
any organic
substance,
calculated as
carbon to the
exclusion of any
other added
substance.
Ammonium nitrite.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ammonium perchlorate 1.1D UN0402 II 1.1D...... 107 None.......... 62......... None....... Forbidden Forbidden 10 19E
Ammonium perchlorate 5.1 UN1442 II 5.1....... 107, A9, IB6, 152........... 212........ 242........ 5 kg 25 kg E 58, 69
IP2, T3, TP33
Ammonium Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
permanganate.
Ammonium persulfate. 5.1 UN1444 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
IP3, T1, TP33
Ammonium picrate, 1.1D UN0004 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E, 19E
dry or wetted with
less than 10
percent water, by
mass.
Ammonium picrate, 4.1 UN1310 I 4.1....... 23, A2, N41 None.......... 211........ None....... 0.5 kg 0.5 kg D 28, 36
wetted with not
less than 10
percent water, by
mass.
Ammonium 8 UN2818 II 8, 6.1.... IB2, T7, TP2, 154........... 202........ 243........ 1 L 30 L B 12, 40,
polysulfide, TP13 52
solution.
.................... ........... .................. III 8, 6.1.... IB3, T4, TP1, 154........... 203........ 241........ 5 L 60 L B 12, 40,
TP13 52
Ammonium 6.1 UN2861 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 44, 89,
polyvanadate. T3, TP33 100,
141
Ammonium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
silicofluoride, see
Ammonium
fluorosilicate.
Ammonium sulfide 8 UN2683 II 8, 6.1, 3. IB1, T7, TP2, 154........... 202........ 243........ 1 L 30 L B 12, 22,
solution. TP13 52, 100
Ammunition, blank, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Cartridges for
weapons, blank.
Ammunition, 1.2G UN0171 II 1.2G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
illuminating with
or without burster,
expelling charge or
propelling charge.
Ammunition, 1.3G UN0254 II 1.3G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
illuminating with
or without burster,
expelling charge or
propelling charge.
[[Page 136]]
Ammunition, 1.4G UN0297 II 1.4G...... ................ .............. 62......... None....... Forbidden 75 kg 02 .......
illuminating with
or without burster,
expelling charge or
propelling charge.
Ammunition, 1.3J UN0247 II 1.3J...... ................ .............. 62......... None....... Forbidden Forbidden 04 23E
incendiary liquid
or gel, with
burster, expelling
charge or
propelling charge.
Ammunition, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
incendiary (water-
activated
contrivances) with
burster, expelling
charge or
propelling charge,
see Contrivances,
water-activated,
etc..
Ammunition, 1.2H UN0243 II 1.2H...... ................ .............. 62......... None....... Forbidden Forbidden 08 8E,
incendiary, white 14E,
phosphorus, with 15E,
burster, expelling 17E
charge or
propelling charge.
Ammunition, 1.3H UN0244 II 1.3H...... ................ .............. 62......... None....... Forbidden Forbidden 08 8E,
incendiary, white 14E,
phosphorus, with 15E,
burster, expelling 17E
charge or
propelling charge.
Ammunition, 1.2G UN0009 II 1.2G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
incendiary with or
without burster,
expelling charge,
or propelling
charge.
Ammunition, 1.3G UN0010 II 1.3G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
incendiary with or
without burster,
expelling charge,
or propelling
charge.
Ammunition, 1.4G UN0300 II 1.4G...... ................ .............. 62......... None....... Forbidden 75 kg 02 .......
incendiary with or
without burster,
expelling charge or
propelling charge.
Ammunition, practice 1.4G UN0362 II 1.4G...... ................ .............. 62......... None....... Forbidden 75 kg 02 .......
Ammunition, practice 1.3G UN0488 II 1.3G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
Ammunition, proof... 1.4G UN0363 II 1.4G...... ................ .............. 62......... None....... Forbidden 75 kg 02 .......
Ammunition, rocket, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Warheads,
rocket etc.
Ammunition, SA ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(small arms), see
Cartridges for
weapons, etc.
[[Page 137]]
Ammunition, smoke ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(water-activated
contrivances),
white phosphorus,
with burster,
expelling charge or
propelling charge,
see Contrivances,
water-activated,
etc. (UN 0248).
Ammunition, smoke ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(water-activated
contrivances),
without white
phosphorus or
phosphides, with
burster, expelling
charge or
propelling charge,
see Contrivances,
water-activated,
etc. (UN 0249).
Ammunition smoke, 1.2H UN0245 II 1.2H...... ................ .............. 62......... None....... Forbidden Forbidden 08 8E,
white phosphorus 14E,
with 15E,
burster,expelling 17E
charge, or
propelling charge.
Ammunition, smoke, 1.3H UN0246 II 1.3H...... ................ .............. 62......... None....... Forbidden Forbidden 08 8E,
white phosphorus 14E,
with burster, 15E,
expelling charge, 17E
or propelling
charge.
Ammunition, smoke 1.2G UN0015 II 1.2G...... ................ .............. 62......... None....... Forbidden Forbidden ............ 8E,
with or without 17E,
burster, expelling 20E
charge or
propelling charge.
Ammunition, smoke 1.3G UN0016 II 1.3G...... ................ .............. 62......... None....... Forbidden Forbidden ............ 8E,
with or without 17E,
burster, expelling 20E
charge or
propelling charge.
Ammunition, smoke 1.4G UN0303 II 1.4G...... ................ .............. 62......... None....... Forbidden 75 kg ............ 7E, 8E,
with or without 14E,
burster, expelling 15E,
charge or 17E
propelling charge.
Ammunition, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
sporting, see
Cartridges for
weapons, etc. (UN
0012; UN 0328; UN
0339).
Ammunition, tear- 6.1 UN2017 II 6.1, 8.... ................ None.......... 212........ None....... Forbidden 50 kg E 13, 40
producing, non-
explosive, without
burster or
expelling charge,
non-fuzed.
Ammunition, tear- 1.2G UN0018 II 1.2G, 8, ................ .............. 62......... None....... Forbidden Forbidden ............ 8E,
producing with 6.1. 17E,
burster, expelling 20E
charge or
propelling charge.
Ammunition, tear- 1.3G UN0019 II 1.3G, 8, ................ .............. 62......... None....... Forbidden Forbidden ............ 8E,
producing with 6.1. 17E,
burster, expelling 20E
charge or
propelling charge.
Ammunition, tear- 1.4G UN0301 II 1.4G, 8, ................ .............. 62......... None....... Forbidden 75 kg ............ 7E, 8E,
producing with 6.1. 14E,
burster, expelling 15E,
charge or 17E
propelling charge.
[[Page 138]]
Ammunition, toxic, 6.1 UN2016 II 6.1....... ................ None.......... 212........ None....... Forbidden 100 kg E 13, 40
non-explosive,
without burster or
expelling charge,
non-fuzed.
Ammunition, toxic ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(water-activated
contrivances), with
burster, expelling
charge or
propelling charge,
see Contrivances,
water-activated,
etc.
G Ammunition, toxic 1.2K UN0020 II 1.2K, 6.1. ................ .............. 62......... None....... Forbidden Forbidden 08 8E,
with burster, 14E,
expelling charge, 15E,
or propelling 17E
charge.
G Ammunition, toxic 1.3K UN0021 II 1.3K, 6.1. ................ .............. 62......... None....... Forbidden Forbidden 08 8E,
with burster, 14E,
expelling charge, 15E,
or propelling 17E
charge.
Amyl acetates....... 3 UN1104 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Amyl acid phosphate. 8 UN2819 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Amyl butyrates...... 3 UN2620 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Amyl chlorides...... 3 UN1107 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Amyl formates....... 3 UN1109 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Amyl mercaptans..... 3 UN1111 II 3......... A3, A6, IB2, T4, None.......... 202........ 242........ 5 L 60 L B 95, 102
TP1
n-Amyl methyl ketone 3 UN1110 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Amyl nitrate........ 3 UN1112 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A 40
Amyl nitrites....... 3 UN1113 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E 40
Amylamines.......... 3 UN1106 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B .......
.................... ........... .................. III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A .......
Amyltrichlorosilane. 8 UN1728 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
N34, T7, TP2,
TP13
Anhydrous ammonia, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ammonia,
anhydrous.
Anhydrous ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrofluoric acid,
see Hydrogen
fluoride, anhydrous.
+ Aniline............. 6.1 UN1547 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40, 52
Aniline 6.1 UN1548 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
hydrochloride. TP33
Aniline oil, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Aniline.
[[Page 139]]
Anisidines.......... 6.1 UN2431 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Anisole............. 3 UN2222 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Anisoyl chloride.... 8 UN1729 II 8......... B2, B4, IB8, 154........... 212........ 240........ 15 kg 50 kg A .......
IP2, IP4, T3,
TP33
Anti-freeze, liquid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Flammable
liquids, n.o.s..
Antimonous chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Antimony
trichloride.
Antimony compounds, 6.1 UN3141 III 6.1....... 35, IB3, T7, 153........... 203........ 241........ 60 L 220 L A .......
inorganic, liquid, TP1, TP28
n.o.s..
Antimony compounds, 6.1 UN1549 III 6.1....... 35, IB8, IP3, 153........... 213........ 240........ 100 kg 200 kg A .......
inorganic, solid, T1, TP33
n.o.s..
Antimony lactate.... 6.1 UN1550 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Antimony 8 UN1730 II 8......... B2, IB2, T7, TP2 None.......... 202........ 242........ 1 L 30 L C 40
pentachloride,
liquid.
Antimony 8 UN1731 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L C 40
pentachloride,
solutions.
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L C 40
Antimony 8 UN1732 II 8, 6.1.... A3, A6, A7, A10, None.......... 202........ 243........ Forbidden 30 L D 44, 89,
pentafluoride. IB2, N3, N36, 100,
T7, TP2 141
Antimony potassium 6.1 UN1551 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
tartrate. TP33
Antimony powder..... 6.1 UN2871 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Antimony sulfide and Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
a chlorate,
mixtures of.
Antimony sulfide, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solid, see Antimony
compounds,
inorganic, n.o.s..
Antimony 8 UN1733 II 8......... B2, IB2 154........... 202........ 242........ 1 L 30 L C 40
trichloride, liquid.
Antimony 8 UN1733 II 8......... IB8, IP2, IP4 154........... 212........ 240........ 15 kg 50 kg A 40
trichloride, solid.
Aqua ammonia, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ammonia solution,
etc.
Argon, compressed... 2.2 UN1006 ....... 2.2....... ................ 306........... 302........ 314, 315... 75 kg 150 kg A .......
Argon, refrigerated 2.2 UN1951 ....... 2.2....... T75, TP5 320........... 316........ 318........ 50 kg 500 kg B .......
liquid (cryogenic
liquid).
Arsenic............. 6.1 UN1558 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Arsenic acid, liquid 6.1 UN1553 I 6.1....... T20, TP2, TP7, None.......... 201........ 243........ 1 L 30 L B 46
TP13
Arsenic acid, solid. 6.1 UN1554 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Arsenic bromide..... 6.1 UN1555 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 12, 40
T3, TP33
Arsenic chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Arsenic
trichloride.
[[Page 140]]
Arsenic compounds, 6.1 UN1556 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40, 137
liquid, n.o.s. TP27
inorganic,
including
arsenates, n.o.s.;
arsenites, n.o.s.;
arsenic sulfides,
n.o.s.; and organic
compounds of
arsenic, n.o.s..
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40, 137
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L B 40, 137
TP28
Arsenic compounds, 6.1 UN1557 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 137
solid, n.o.s. TP33
inorganic,
including
arsenates, n.o.s.;
arsenites, n.o.s.;
arsenic sulfides,
n.o.s.; and organic
compounds of
arsenic, n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 137
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 137
TP33
Arsenic pentoxide... 6.1 UN1559 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Arsenic sulfide and Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
a chlorate,
mixtures of.
Arsenic trichloride. 6.1 UN1560 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden B 40
B74, T20, TP2,
TP13, TP38, TP45
Arsenic trioxide.... 6.1 UN1561 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Arsenic, white, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solid, see Arsenic
trioxide.
Arsenical dust...... 6.1 UN1562 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Arsenical 3 UN2760 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticides, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
[[Page 141]]
Arsenical 6.1 UN2994 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Arsenical 6.1 UN2993 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, 153........... 203........ 242........ 60 L 220 L A 40
TP2, TP28
Arsenical 6.1 UN2759 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Arsenious acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solid, see Arsenic
trioxide.
Arsenious and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mercuric iodide
solution, see
Arsenic compounds,
liquid, n.o.s..
Arsine.............. 2.3 UN2188 ....... 2.3, 2.1.. 1 None.......... 192........ 245........ Forbidden Forbidden D 40
Articles, explosive, 1.6N UN0486 II 1.6N...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
extremely
insensitive or
Articles, EEI.
G Articles, explosive, 1.4S UN0349 II 1.4S...... 101 None.......... 62......... None....... 25 kg 100 kg 05 .......
n.o.s..
G Articles, explosive, 1.4B UN0350 II 1.4B...... 101 None.......... 62......... None....... Forbidden Forbidden 06 .......
n.o.s..
G Articles, explosive, 1.4C UN0351 II 1.4C...... 101 None.......... 62......... None....... Forbidden 75 kg 06 .......
n.o.s..
G Articles, explosive, 1.4D UN0352 II 1.4D...... 101 None.......... 62......... None....... Forbidden 75 kg 06 .......
n.o.s..
G Articles, explosive, 1.4G UN0353 II 1.4G...... 101 None.......... 62......... None....... Forbidden 75 kg 06 .......
n.o.s..
G Articles, explosive, 1.1L UN0354 II 1.1L...... 101 None.......... 62......... None....... Forbidden Forbidden 08 8E,
n.o.s.. 14E,
15E,
17E
G Articles, explosive, 1.2L UN0355 II 1.2L...... 101 None.......... 62......... None....... Forbidden Forbidden 08 8E,
n.o.s.. 14E,
15E,
17E
G Articles, explosive, 1.3L UN0356 II 1.3L...... 101 None.......... 62......... None....... Forbidden Forbidden 08 8E,
n.o.s.. 14E,
15E,
17E
G Articles, explosive, 1.1C UN0462 II 1.1C...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
n.o.s..
G Articles, explosive, 1.1D UN0463 II 1.1D...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
n.o.s..
G Articles, explosive, 1.1E UN0464 II 1.1E...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
n.o.s..
G Articles, explosive, 1.1F UN0465 II 1.1F...... 101 None.......... 62......... None....... Forbidden Forbidden 08 .......
n.o.s..
G Articles, explosive, 1.2C UN0466 II 1.2C...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
n.o.s..
[[Page 142]]
G Articles, explosive, 1.2D UN0467 II 1.2D...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
n.o.s..
G Articles, explosive, 1.2E UN0468 II 1.2E...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
n.o.s..
G Articles, explosive, 1.2F UN0469 II 1.2F...... 101 None.......... 62......... None....... Forbidden Forbidden 08 .......
n.o.s..
G Articles, explosive, 1.3C UN0470 II 1.3C...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
n.o.s..
G Articles, explosive, 1.4E UN0471 II 1.4E...... 101 None.......... 62......... None....... Forbidden 75 kg 06 .......
n.o.s..
G Articles, explosive, 1.4F UN0472 II 1.4F...... 101 None.......... 62......... None....... Forbidden Forbidden 08 .......
n.o.s..
Articles, 2.2 UN3164 ....... 2.2....... ................ 306........... 302, 304... None....... No limit No limit A .......
pressurized
pneumatic or
hydraulic
containing non-
flammable gas.
Articles, pyrophoric 1.2L UN0380 II 1.2L...... ................ None.......... 62......... None....... Forbidden Forbidden 08 8E,
14E,
15E,
17E
Articles, 1.1G UN0428 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
pyrotechnic for
technical purposes.
Articles, 1.2G UN0429 II 1.2G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
pyrotechnic for
technical purposes.
Articles, 1.3G UN0430 II 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
pyrotechnic for
technical purposes.
Articles, 1.4G UN0431 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
pyrotechnic for
technical purposes.
Articles, 1.4S UN0432 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
pyrotechnic for
technical purposes.
D Asbestos............ 9 NA2212 III 9......... 156, IB8, IP2, 155........... 216........ 240........ 200 kg 200 kg A 34, 40
IP4
Ascaridole (organic Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxide).
D Asphalt, at or above 3 NA1999 III 3......... IB3, T1, TP3 150........... 203........ 247........ Forbidden Forbidden D .......
its flash point.
D Asphalt, cut back, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Tars, liquid,
etc.
Automobile, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
motorcycle,
tractor, other self-
propelled vehicle,
engine, or other
mechanical
apparatus, see
Vehicles or Battery
etc.
A G Aviation regulated 9 UN3334 ....... 9......... A35 155........... 204........ ........... No limit No limit A .......
liquid, n.o.s..
A G Aviation regulated 9 UN3335 ....... 9......... A35 155........... 204........ ........... No limit No limit A .......
solid, n.o.s..
Azaurolic acid (salt Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
of) (dry).
Azido guanidine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
picrate (dry).
[[Page 143]]
5-Azido-1-hydroxy Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetrazole.
Azido hydroxy Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetrazole (mercury
and silver salts).
3-Azido-1,2- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Propylene glycol
dinitrate.
Azidodithiocarbonic Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid.
Azidoethyl nitrate.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1- ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Aziridinylphosphine
oxide-(tris), see
Tris-(1-aziridinyl)
phosphine oxide,
solution.
Azodicarbonamide.... 4.1 UN3242 II 4.1....... 38, IB8, T3, 151........... 212........ 240........ Forbidden Forbidden D 12, 52,
TP33 53, 74
Azotetrazole (dry).. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Barium.............. 4.3 UN1400 II 4.3....... A19, IB7, IP2, 151........... 212........ 241........ 15 kg 50 kg E 52
T3, TP33
Barium alloys, 4.2 UN1854 I 4.2....... T21, TP7, TP33 None.......... 181........ None....... Forbidden Forbidden D .......
pyrophoric.
Barium azide, dry or 1.1A UN0224 II 1.1A, 6.1. 111, 117 None.......... 62......... None....... Forbidden Forbidden 12 .......
wetted with less
than 50 percent
water, by mass.
Barium azide, wetted 4.1 UN1571 I 4.1, 6.1.. 162, A2 None.......... 182........ None....... Forbidden 0.5 kg D 28
with not less than
50 percent water,
by mass.
Barium bromate...... 5.1 UN2719 II 5.1, 6.1.. IB8, IP2, IP4, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
T3, TP33
Barium chlorate, 5.1 UN1445 II 5.1, 6.1.. A9, IB6, IP2, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
solid. N34, T3, TP33
Barium chlorate, 5.1 UN3405 II 5.1, 6.1.. A9, IB2, N34, 152........... 202........ 243........ 1 L 5 L A 56, 58,
solution. T4, TP1 133
.................... ........... .................. III 5.1, 6.1.. A9, IB2, N34, 152........... 203........ 242........ 2.5 L 30 L A 56, 58,
T4, TP1 133
Barium compounds, 6.1 UN1564 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
n.o.s.. T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Barium cyanide...... 6.1 UN1565 I 6.1....... IB7, IP1, N74, None.......... 211........ 242........ 5 kg 50 kg A 40, 52
N75, T6, TP33
Barium hypochlorite 5.1 UN2741 II 5.1, 6.1.. A7, A9, IB8, 152........... 212........ None....... 5 kg 25 kg B 4, 52,
with more than 22 IP2, IP4, N34, 56, 58,
percent available T3, TP33 106
chlorine.
Barium nitrate...... 5.1 UN1446 II 5.1, 6.1.. IB8, IP2, IP4, 152........... 212........ 242........ 5 kg 25 kg A .......
T3, TP33
Barium oxide........ 6.1 UN1884 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Barium perchlorate, 5.1 UN1447 II 5.1, 6.1.. IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
solid. TP33
Barium perchlorate, 5.1 UN3406 II 5.1, 6.1.. IB2, T4, TP1 152........... 202........ 243........ 1 L 5 L A 56, 58,
solution. 133
.................... ........... .................. III 5.1, 6.1.. IB2, T4, TP1 152........... 203........ 242........ 2.5 L 30 L A 56, 58,
133
[[Page 144]]
Barium permanganate. 5.1 UN1448 II 5.1, 6.1.. IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg D 56, 58,
TP33 138
Barium peroxide..... 5.1 UN1449 II 5.1, 6.1.. A9, IB6, IP2, 152........... 212........ 242........ 5 kg 25 kg A 13, 52,
T3, TP33 56, 75
Barium selenate, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Selenates or
Selenites.
Barium selenite, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Selenates or
Selenites.
Batteries, 4.3 UN3292 II 4.3....... ................ 189........... 189........ 189........ Forbidden No limit A .......
containing sodium.
Batteries, dry, 8 UN3028 III 8......... ................ None.......... 213........ None....... 25 kg gross 230 kg A .......
containing gross
potassium hydroxide
solid, electric,
storage.
Batteries, wet, 8 UN2794 III 8......... ................ 159........... 159........ 159........ 30 kg gross No limit A .......
filled with acid,
electric storage.
Batteries, wet, 8 UN2795 III 8......... ................ 159........... 159........ 159........ 30 kg gross No limit A .......
filled with alkali,
electric storage.
Batteries, wet, non- 8 UN2800 III 8......... ................ 159........... 159........ 159........ No Limit No Limit A .......
spillable, electric
storage.
Batteries, dry, not ........... .................. ....... .......... 130 .............. ........... ........... ........... ........... ............ .......
subject to the
requirements of
this subchapter.
Battery fluid, acid. 8 UN2796 II 8......... A3, A7, B2, B15, 154........... 202........ 242........ 1 L 30 L B .......
IB2, N6, N34,
T8, TP2, TP12
Battery fluid, 8 UN2797 II 8......... B2, IB2, N6, T7, 154........... 202........ 242........ 1 L 30 L A 29
alkali. TP2, TP28
Battery lithium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
type, see Lithium
batteries etc.
Battery-powered 9 UN3171 ....... 9......... 134 220........... 220........ None....... No limit No limit ............ .......
vehicle or Battery-
powered equipment.
Battery, wet, filled ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
with acid or alkali
with vehicle or
mechanical
equipment
containing an
internal combustion
engine, see
Vehicle, etc. or
Engines, internal
combustion, etc.
+ Benzaldehyde........ 9 UN1990 III 9......... IB3, T2, TP1 155........... 203........ 241........ 100 L 220 L A .......
Benzene............. 3 UN1114 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
[[Page 145]]
Benzene diazonium Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
chloride (dry).
Benzene diazonium Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrate (dry).
Benzene phosphorus ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dichloride, see
Phenyl phosphorus
dichloride.
Benzene phosphorus ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
thiodichloride, see
Phenyl phosphorus
thiodichloride.
Benzene sulfonyl 8 UN2225 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A 40
chloride.
Benzene triozonide.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Benzenethiol, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Phenyl mercaptan.
Benzidine........... 6.1 UN1885 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Benzol, see Benzene. ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Benzonitrile........ 6.1 UN2224 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40, 52
Benzoquinone........ 6.1 UN2587 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Benzotrichloride.... 8 UN2226 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A 40
Benzotrifluoride.... 3 UN2338 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
Benzoxidiazoles Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Benzoyl azide....... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Benzoyl chloride.... 8 UN1736 II 8......... B2, IB2, T8, 154........... 202........ 242........ 1 L 30 L C 40
TP2, TP12, TP13
Benzyl bromide...... 6.1 UN1737 II 6.1, 8.... A3, A7, IB2, 153........... 202........ 243........ 1 L 30 L D 13, 40
N33, N34, T8,
TP2, TP12, TP13
Benzyl chloride..... 6.1 UN1738 II 6.1, 8.... A3, A7, B70, 153........... 202........ 243........ 1 L 30 L D 13, 40
IB2, N33, N42,
T8, TP2, TP12,
TP13
Benzyl chloride 6.1 UN1738 II 6.1, 8.... A3, A7, B8, B11, 153........... 202........ 243........ 1 L 30 L D 13, 40
unstabilized. IB2, N33, N34,
N43, T8, TP2,
TP12, TP13
Benzyl chloroformate 8 UN1739 I 8......... A3, A6, B4, N41, None.......... 201........ 243........ Forbidden 2.5 L D 40
T10, TP2, TP12,
TP13
Benzyl iodide....... 6.1 UN2653 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L B 12, 40
Benzyldimethylamine. 8 UN2619 II 8, 3...... B2, IB2, T7, TP2 154........... 202........ 243........ 1 L 30 L A 40, 48
Benzylidene chloride 6.1 UN1886 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L D 40
Beryllium compounds, 6.1 UN1566 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
n.o.s.. T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Beryllium nitrate... 5.1 UN2464 II 5.1, 6.1.. IB8, IP2, IP4, 152........... 212........ 242........ 5 kg 25 kg A .......
T3, TP33
Beryllium, powder... 6.1 UN1567 II 6.1, 4.1.. IB8, IP2, IP4, 153........... 212........ 242........ 15 kg 50 kg A .......
T3, TP33
[[Page 146]]
Bicyclo [2,2,1] 3 UN2251 II 3......... IB2, T7, TP2 150........... 202........ 242........ 5 L 60 L D .......
hepta-2,5-diene,
stabilized or 2,5-
Norbornadiene,
stabilized.
Biphenyl triozonide. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Bipyridilium 3 UN2782 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L E .......
pesticides, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Bipyridilium 6.1 UN3016 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Bipyridilium 6.1 UN3015 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 21, 40
pesticides, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 21, 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, 153........... 203........ 242........ 60 L 220 L A 21, 40
TP2, TP28
Bipyridilium 6.1 UN2781 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Bis (Aminopropyl) ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
piperazine, see
Corrosive liquid,
n.o.s..
Bisulfate, aqueous 8 UN2837 II 8......... A7, B2, IB2, 154........... 202........ 242........ 1 L 30 L A .......
solution. N34, T7, TP2
.................... ........... .................. III 8......... A7, IB3, N34, 154........... 203........ 241........ 5 L 60 L A .......
T4, TP1
Bisulfites, aqueous 8 UN2693 III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A 40, 52
solutions, n.o.s.. TP28
[[Page 147]]
Black powder, 1.1D UN0028 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
compressed or
Gunpowder,
compressed or Black
powder, in pellets
or Gunpowder, in
pellets.
Black powder or 1.1D UN0027 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Gunpowder, granular
or as a meal.
D Black powder for 4.1 NA0027 I 4.1....... 70 None.......... 170........ None....... Forbidden Forbidden E .......
small arms.
Blasting agent, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
n.o.s., see
Explosives,
blasting etc.
Blasting cap ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
assemblies, see
Detonator
assemblies, non-
electric, for
blasting.
Blasting caps, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
electric, see
Detonators,
electric for
blasting.
Blasting caps, non- ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
electric, see
Detonators, non-
electric, for
blasting.
Bleaching powder, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Calcium
hypochlorite
mixtures, etc.
I Blue asbestos 9 UN2212 II 9......... 156, IB8, IP2, 155........... 216........ 240........ Forbidden Forbidden A 34, 40
(Crocidolite) or IP4, T3, TP33
Brown asbestos
(amosite, mysorite).
Bombs, photo-flash.. 1.1F UN0037 II 1.1F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
Bombs, photo-flash.. 1.1D UN0038 II 1.1D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
Bombs, photo-flash.. 1.2G UN0039 II 1.2G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
Bombs, photo-flash.. 1.3G UN0299 II 1.3G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
Bombs, smoke, non- 8 UN2028 II 8......... ................ None.......... 160........ None....... Forbidden 50 kg E 40
explosive, with
corrosive liquid,
without initiating
device.
Bombs, with bursting 1.1F UN0033 II 1.1F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
charge.
Bombs, with bursting 1.1D UN0034 II 1.1D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
charge.
Bombs, with bursting 1.2D UN0035 II 1.2D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
charge.
Bombs, with bursting 1.2F UN0291 II 1.2F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
charge.
Bombs with flammable 1.1J UN0399 II 1.1J...... ................ .............. 62......... None....... Forbidden Forbidden 04 23E
liquid, with
bursting charge.
Bombs with flammable 1.2J UN0400 II 1.2J...... ................ .............. 62......... None....... Forbidden Forbidden 04 23E
liquid, with
bursting charge.
Boosters with 1.1B UN0225 II 1.1B...... ................ None.......... 62......... None....... Forbidden Forbidden 11 .......
detonator.
Boosters with 1.2B UN0268 II 1.2B...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
detonator.
Boosters, without 1.1D UN0042 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
detonator.
Boosters, without 1.2D UN0283 II 1.2D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
detonator.
Borate and chlorate ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixtures, see
Chlorate and borate
mixtures.
Borneol............. 4.1 UN1312 III 4.1....... A1, IB8, IP3, None.......... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
[[Page 148]]
+ Boron tribromide.... 8 UN2692 I 8, 6.1.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden C 12
B74, N34, T20,
TP2, TP12, TP13,
TP38, TP45
Boron trichloride... 2.3 UN1741 ....... 2.3, 8.... 3, B9, B14 None.......... 304........ 314........ Forbidden Forbidden D 25, 40
Boron trifluoride... 2.3 UN1008 ....... 2.3....... 2, B9, B14 None.......... 302........ 314, 315... Forbidden Forbidden D 40
Boron trifluoride 8 UN1742 II 8......... B2, B6, IB2, T8, 154........... 202........ 242........ 1 L 30 L A .......
acetic acid TP2, TP12
complex, liquid.
Boron trifluoride 8 UN3419 II 8......... B2, B6, IB8, 154........... 212........ 240........ 15 kg 50 kg A .......
acetic acid IP2, IP4, T3,
complex, solid. TP33
Boron trifluoride 8 UN2604 I 8, 3...... A3, A19, T10, None.......... 201........ 243........ 0.5 L 2.5 L D 40
diethyl etherate. TP2
Boron trifluoride 8 UN2851 II 8......... IB2, T7, TP2 154........... 212........ 240........ 15 kg 50 kg B 12, 40,
dihydrate.
Boron trifluoride 4.3 UN2965 I 4.3, 8, 3. A19, T10, TP2, None.......... 201........ 243........ Forbidden 1 L D 21, 28,
dimethyl etherate. TP7 40, 49,
100
Boron trifluoride 8 UN1743 II 8......... B2, IB2, T8, 154........... 202........ 242........ 1 L 30 L A .......
propionic acid TP2, TP12
complex, liquid.
Boron trifluoride 8 UN3420 II 8......... B2, IB8, IP2, 154........... 212........ 240........ 15 kg 50 kg A .......
propionic acid IP4, T3, TP33
complex, solid.
Box toe gum, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrocellulose etc.
Bromates, inorganic, 5.1 UN3213 II 5.1....... IB2, T4, TP1 152........... 202........ 242........ 1 L 5 L B 56, 58,
aqueous solution, 133
n.o.s..
.................... ........... .................. III 5.1....... IB2, T4, TP1 152........... 203........ 241........ 2.5 L 30 L B 56, 58,
133
Bromates, inorganic, 5.1 UN1450 II 5.1....... IB8, IP2, IP4, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
n.o.s.. T3, TP33
+ Bromine............. 8 UN1744 I 8, 6.1.... 1, B9, B64, B85, None.......... 226........ 249........ Forbidden Forbidden D 12, 40,
N34, N43, T22, 66, 74,
TP2, TP10, TP12, 89, 90
TP13
Bromine azide....... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Bromine chloride.... 2.3 UN2901 ....... 2.3, 8, 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 89,
5.1. 90
[[Page 149]]
+ Bromine 5.1 UN1745 I 5.1, 6.1, 1, B9, B14, B30, None.......... 228........ 244........ Forbidden Forbidden D 25, 40,
pentafluoride. 8. B72, T22, TP2, 66, 90
TP12, TP13,
TP38, TP44
+ Bromine solutions... 8 UN1744 I 8, 6.1.... 1, B9, B64, B85, None.......... 226........ 249........ Forbidden Forbidden D 12, 40,
N34, N43, T22, 66, 74,
TP2, TP10, TP12, 89, 90
TP13
+ Bromine solutions... 8 UN1744 I 8, 6.1.... 2, B9, B64, B85, None.......... 227........ 249........ Forbidden Forbidden D 12, 40,
N34, N43, T22, 66, 74,
TP2, TP10, TP12, 89, 90
TP13
+ Bromine trifluoride. 5.1 UN1746 I 5.1, 6.1, 2, B9, B14, B32, None.......... 228........ 244........ Forbidden Forbidden D 25, 40,
8. B74, T22, TP2, 66, 90
TP12, TP13,
TP38, TP45
4-Bromo-1,2- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitrobenzene.
4-Bromo-1,2- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitrobenzene
(unstable at 59
degrees C).
1-Bromo-3- 6.1 UN2688 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
chloropropane.
1-Bromo-3- 3 UN2341 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
methylbutane.
1-Bromo-3- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrobenzene
(unstable at 56
degrees C).
2-Bromo-2- 4.1 UN3241 III 4.1....... 46, IB8, IP3 151........... 213........ None....... 25 kg 50 kg C 12, 25,
nitropropane-1,3- 40
diol.
Bromoacetic acid, 8 UN3425 II 8......... A7, IB8, IP2, 154........... 212........ 240........ 15 kg 50 kg A .......
solid. IP4, N34, T3,
TP33
Bromoacetic acid 8 UN1938 II 8......... A7, B2, IB2, T7, 154........... 202........ 242........ 1 L 30 L A 40
solution. TP2
.................... ........... .................. III 8......... B2, IB3, T7, TP2 154........... 203........ 241........ 5 L 60 L A 40
+ Bromoacetone........ 6.1 UN1569 II 6.1, 3.... 2, T20, TP2, None.......... 193........ 245........ Forbidden Forbidden D 40
TP13
Bromoacetyl bromide. 8 UN2513 II 8......... B2, IB2, T8, 154........... 202........ 242........ 1 L 30 L C 40, 53
TP2, TP12
Bromobenzene........ 3 UN2514 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Bromobenzyl 6.1 UN1694 I 6.1....... T14, TP2, TP13 None.......... 201........ 243........ Forbidden 30 L D 12, 40,
cyanides, liquid. 52
Bromobenzyl 6.1 UN3449 I 6.1....... T6, TP33 None.......... 211........ 242........ 5 kg 50 kg D 12, 40,
cyanides, solid. 52
1-Bromobutane....... 3 UN1126 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
2-Bromobutane....... 3 UN2339 II 3......... B1, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
Bromochloromethane.. 6.1 UN1887 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
2-Bromoethyl ethyl 3 UN2340 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
ether.
Bromoform........... 6.1 UN2515 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 12, 40
Bromomethylpropanes. 3 UN2342 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
2-Bromopentane...... 3 UN2343 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Bromopropanes....... 3 UN2344 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
.................... ........... .................. III 3......... IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
3-Bromopropyne...... 3 UN2345 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L D 40
Bromosilane......... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
[[Page 150]]
Bromotoluene-alpha, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Benzyl bromide.
Bromotrifluoroethyle 2.1 UN2419 ....... 2.1....... ................ None.......... 304........ 314, 315... Forbidden 150 kg B 40
ne.
Bromotrifluoromethan 2.2 UN1009 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
e or Refrigerant
gas, R 13B1..
Brucine............. 6.1 UN1570 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A .......
TP33
Bursters, explosive. 1.1D UN0043 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Butadienes, 2.1 UN1010 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
stabilized or
Butadienes and
Hydrocarbon
mixture, stabilized
containing more
than 40% butadienes.
Butane see also 2.1 UN1011 ....... 2.1....... 19, T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
Petroleum gases,
liquefied.
Butane, butane ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixtures and
mixtures having
similar properties
in cartridges each
not exceeding 500
grams, see
Receptacles, etc.
Butanedione......... 3 UN2346 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
1,2,4-Butanetriol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
trinitrate.
Butanols............ 3 UN1120 II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP29
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
tert-Butoxycarbonyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
azide.
Butyl acetates...... 3 UN1123 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Butyl acid phosphate 8 UN1718 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Butyl acrylates, 3 UN2348 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
stabilized.
Butyl alcohols, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Butanols.
Butyl benzenes...... 3 UN2709 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
n-Butyl bromide, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1-Bromobutane.
n-Butyl chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Chlorobutanes.
[[Page 151]]
D sec-Butyl 6.1 NA2742 I 6.1, 3, 8. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A 12, 13,
chloroformate. B74, T20, TP4, 22, 25,
TP12, TP13, 40, 48,
TP38, TP45 100
n-Butyl 6.1 UN2743 I 6.1, 8, 3. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A 12, 13,
chloroformate. B74, T20, TP2, 21, 25,
TP13, TP38, TP45 40, 100
Butyl ethers, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dibutyl ethers.
Butyl ethyl ether, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ethyl butyl
ether.
n-Butyl formate..... 3 UN1128 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
tert-Butyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydroperoxide, with
more than 90
percent with water.
tert-Butyl 4.2 UN3255 I 4.2, 8.... ................ None.......... 211........ 243........ Forbidden Forbidden D .......
hypochlorite.
N-n-Butyl imidazole. 6.1 UN2690 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
tert-Butyl 6.1 UN2484 I 6.1, 3.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
isocyanate. B72, T22, TP2,
TP13, TP38, TP44
n-Butyl isocyanate.. 6.1 UN2485 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, B77, T20,
TP2, TP13, TP38,
TP45
Butyl mercaptans.... 3 UN2347 II 3......... A3, A6, IB2, T4, 150........... 202........ 242........ 5 L 60 L D 52, 95
TP1
n-Butyl 3 UN2227 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
methacrylate,
stabilized.
Butyl methyl ether.. 3 UN2350 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Butyl nitrites...... 3 UN2351 I 3......... T11, TP1, TP8, 150........... 201........ 243........ 1 L 30 L E 40
TP27
.................... ........... .................. II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A 40
tert-Butyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxyacetate, with
more than 76
percent in solution.
n-Butyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxydicarbonate,
with more than 52
percent in solution.
tert-Butyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxyisobutyrate,
with more than 77
percent in solution.
Butyl phosphoric ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid, see Butyl
acid phosphate.
Butyl propionates... 3 UN1914 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
5-tert-Butyl-2,4,6- 4.1 UN2956 III 4.1....... 159 None.......... 223........ None....... Forbidden Forbidden D 12, 25,
trinitro-m-xylene 48, 127
or Musk xylene.
Butyl vinyl ether, 3 UN2352 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
stabilized.
n-Butylamine........ 3 UN1125 II 3, 8...... IB2, T7, TP1 150........... 202........ 242........ 1 L 5 L B 40
N-Butylaniline...... 6.1 UN2738 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 74
[[Page 152]]
tert- 6.1 UN2747 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 12, 13,
Butylcyclohexylchlo 25
roformate.
Butylene see also 2.1 UN1012 ....... 2.1....... 19, T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
Petroleum gases,
liquefied.
1,2-Butylene oxide, 3 UN3022 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 27, 49
stabilized.
Butyltoluenes....... 6.1 UN2667 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Butyltrichlorosilane 8 UN1747 II 8, 3...... A7, B2, B6, IB2, None.......... 202........ 243........ Forbidden 30 L C 40
N34, T7, TP2,
TP13
1,4-Butynediol...... 6.1 UN2716 III 6.1....... A1, IB8, IP3, None.......... 213........ 240........ 100 kg 200 kg A 52, 53,
T1, TP33 70,
139,
140
Butyraldehyde....... 3 UN1129 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Butyraldoxime....... 3 UN2840 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Butyric acid........ 8 UN2820 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A 12
Butyric anhydride... 8 UN2739 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Butyronitrile....... 3 UN2411 II 3, 6.1.... IB2, T7, TP1, 150........... 202........ 243........ 1 L 60 L E 40
TP13
Butyryl chloride.... 3 UN2353 II 3, 8...... IB2, T8, TP2, 150........... 202........ 243........ 1 L 5 L C 40
TP12, TP13
Cacodylic acid...... 6.1 UN1572 II 6.1....... IB8, IP2, 153........... 212........ 242........ 25 kg 100 kg E 52
IP4,T3, TP33
Cadmium compounds... 6.1 UN2570 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A .......
TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Caesium hydroxide... 8 UN2682 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 29
T3, TP33
Caesium hydroxide 8 UN2681 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A 29
solution.
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A 29
Calcium............. 4.3 UN1401 II 4.3....... IB7, IP2, T3, 151........... 212........ 241........ 15 kg 50 kg E 52
TP33
Calcium arsenate.... 6.1 UN1573 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Calcium arsenate and 6.1 UN1574 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
calcium arsenite, T3, TP33
mixtures, solid.
[[Page 153]]
Calcium bisulfite ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Bisulfites, aqueous
solutions, n.o.s..
Calcium carbide..... 4.3 UN1402 I 4.3....... A1, A8, B55, None.......... 211........ 242........ Forbidden 15 kg B 52
B59, IB4, IP1,
N34, T9, TP7,
TP33
.................... ........... .................. II 4.3....... A1, A8, B55, 151........... 212........ 241........ 15 kg 50 kg B 52
B59, IB7, IP2,
N34, T3, TP33
Calcium chlorate.... 5.1 UN1452 II 5.1....... A9, IB8, IP2, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
IP4, N34, T3,
TP33
Calcium chlorate 5.1 UN2429 II 5.1....... A2, IB2, N41, 152........... 202........ 242........ 1 L 5 L B 56, 58,
aqueous solution. T4, TP1 133
.................... ........... .................. III 5.1....... A2, IB2, N41, 152........... 203........ 241........ 2.5 L 30 L B 56, 68,
T4, TP1 133
Calcium chlorite.... 5.1 UN1453 II 5.1....... A9, IB8, IP2, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
IP4, N34, T3,
TP33
Calcium cyanamide 4.3 UN1403 III 4.3....... A1, A19, IB8, 151........... 213........ 241........ 25 kg 100 kg A 52
with more than 0.1 IP4, T1, TP33
percent of calcium
carbide.
Calcium cyanide..... 6.1 UN1575 I 6.1....... IB7, IP1, N79, None.......... 211........ 242........ 5 kg 50 kg A 40, 52
N80, T6, TP33
Calcium dithionite 4.2 UN1923 II 4.2....... A19, A20, IB6, None.......... 212........ 241........ 15 kg 50 kg E 13
or Calcium IP2, T3, TP33
hydrosulfite.
Calcium hydride..... 4.3 UN1404 I 4.3....... A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 52
Calcium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrosulfite, see
Calcium dithionite.
Calcium 5.1 UN1748 II 5.1....... 165, 166, A7, 152........... 212........ None....... 5 kg 25 kg D 4, 25,
hypochlorite, dry A9, IB8, IP2, 48, 52,
or Calcium IP4, IP13, N34, 56, 58,
hypochlorite W9 69, 142
mixtures dry with
more than 39
percent available
chlorine (8.8
percent available
oxygen).
.................... ........... .................. III 5.1....... 165, 171, A7, 152........... 213........ 240........ 25 kg 100 kg D 4, 25,
A9, IB8, IP4, 48, 52,
IP13, N34, W9 56, 58,
69, 142
Calcium 5.1 UN2880 II 5.1....... 165, 166, IB8, 152........... 212........ 240........ 5 kg 25 kg D 4, 25,
hypochlorite, IP2, IP4, IP13, 48, 52,
hydrated or Calcium W9 56, 58,
hypochlorite, 69, 142
hydrated mixtures,
with not less than
5.5 percent but not
more than 16
percent water.
.................... ........... .................. III 5.1....... 165, 171, IB8, 152........... 213........ 240........ 25 kg 100 kg D 4, 25,
IP4, IP13, W9 48, 52,
56, 58,
69, 142
Calcium hypochlorite 5.1 UN2208 III 5.1....... 165, A1, A29, 152........... 213........ 240........ 25 kg 100 kg D 4, 25,
mixtures, dry, with IB8, IP3, IP13, 48, 52,
more than 10 N34, W9 56, 58,
percent but not 69, 142
more than 39
percent available
chlorine.
[[Page 154]]
Calcium manganese 4.3 UN2844 III 4.3....... A1, A19, IB8, 151........... 213........ 241........ 25 kg 100 kg A 52, 85,
silicon. IP2, IP4, T1, 103
TP33
Calcium nitrate..... 5.1 UN1454 III 5.1....... 34, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
A Calcium oxide....... 8 UN1910 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
TP33
Calcium perchlorate. 5.1 UN1455 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
TP33
Calcium permanganate 5.1 UN1456 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg D 56, 58,
TP33 138
Calcium peroxide.... 5.1 UN1457 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 13, 52,
TP33 56, 75
Calcium phosphide... 4.3 UN1360 I 4.3, 6.1.. A8, A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 40, 52,
85
Calcium, pyrophoric 4.2 UN1855 I 4.2....... ................ None.......... 187........ None....... Forbidden Forbidden D .......
or Calcium alloys,
pyrophoric.
Calcium resinate.... 4.1 UN1313 III 4.1....... A1, A19, IB6, None.......... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
Calcium resinate, 4.1 UN1314 III 4.1....... A1, A19, IB4, None.......... 213........ 240........ 25 kg 100 kg A .......
fused. T1, TP33
Calcium selenate, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Selenates or
Selenites.
Calcium silicide.... 4.3 UN1405 II 4.3....... A19, IB7, IP2, 151........... 212........ 241........ 15 kg 50 kg B 52, 85,
T3, TP33 103
.................... ........... .................. III 4.3....... A1, A19, IB8, 151........... 213........ 241........ 25 kg 100 kg B 52, 85,
IP4, T1, TP33 103
Camphor oil......... 3 UN1130 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Camphor, synthetic.. 4.1 UN2717 III 4.1....... A1, IB8, IP3, None.......... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
Cannon primers, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Primers, tubular.
Caproic acid........ 8 UN2829 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Caps, blasting, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Detonators, etc.
Carbamate 3 UN2758 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticides, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
[[Page 155]]
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Carbamate 6.1 UN2992 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Carbamate 6.1 UN2991 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, 153........... 203........ 242........ 60 L 220 L A 40
TP2, TP28
Carbamate 6.1 UN2757 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Carbolic acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Phenol, solid or
Phenol, molten.
Carbolic acid ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solutions, see
Phenol solutions.
I Carbon, activated... 4.2 UN1362 III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 0.5 kg 0.5 kg A 12
TP33
I Carbon, animal or 4.2 UN1361 II 4.2....... IB6, T3, TP33 None.......... 212........ 242........ Forbidden Forbidden A 12
vegetable origin.
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ Forbidden Forbidden A 12
TP33
Carbon bisulfide, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Carbon
disulfide.
Carbon dioxide...... 2.2 UN1013 ....... 2.2....... ................ 306........... 302, 304... 302, 314, 75 kg 150 kg A .......
315.
Carbon dioxide and 2.2 UN1015 ....... 2.2....... ................ 306........... None....... 314, 315... 75 kg 150 kg A .......
nitrous oxide
mixtures.
Carbon dioxide and 2.2 UN1014 ....... 2.2, 5.1.. 77, A14 306........... 304........ 314, 315... 75 kg 150 kg A .......
oxygen mixtures,
compressed.
Carbon dioxide, 2.2 UN2187 ....... 2.2....... T75, TP5 306........... 304........ 314, 315... 50 kg 500 kg B .......
refrigerated liquid.
A W Carbon dioxide, 9 UN1845 III None...... ................ 217........... 217........ 240........ 200 kg 200 kg C 40
solid or Dry ice.
Carbon disulfide.... 3 UN1131 I 3, 6.1.... B16, T14, TP2, None.......... 201........ 243........ Forbidden Forbidden D 18, 40,
TP7, TP13 115
Carbon monoxide, 2.3 UN1016 ....... 2.3, 2.1.. 4 None.......... 302........ 314, 315... Forbidden 25 kg D 40
compressed.
Carbon monoxide and 2.3 UN2600 ....... 2.3, 2.1.. 6 None.......... 302........ 302........ Forbidden Forbidden D 40, 57
hydrogen mixture,
compressed.
[[Page 156]]
D Carbon monoxide, 2.3 NA9202 ....... 2.3, 2.1.. 4, T75, TP5 None.......... 316........ 318........ Forbidden Forbidden D .......
refrigerated liquid
(cryogenic liquid).
Carbon tetrabromide. 6.1 UN2516 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 25
TP33
Carbon tetrachloride 6.1 UN1846 II 6.1....... IB2, N36, T7, 153........... 202........ 243........ 5 L 60 L A 40
TP2
Carbonyl chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Phosgene.
Carbonyl fluoride... 2.3 UN2417 ....... 2.3, 8.... 2 None.......... 302........ None....... Forbidden Forbidden D 40
Carbonyl sulfide.... 2.3 UN2204 ....... 2.3, 2.1.. 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
Cartridge cases, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
empty primed, see
Cases, cartridge,
empty, with primer.
Cartridges, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
actuating, for
aircraft ejector
seat catapult, fire
extinguisher,
canopy removal or
apparatus, see
Cartridges, power
device.
Cartridges, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
explosive, see
Charges, demolition.
Cartridges, flash... 1.1G UN0049 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Cartridges, flash... 1.3G UN0050 II 1.3G...... ................ None.......... 62......... None....... Forbidden 75 kg 07 .......
Cartridges for 1.1C UN0326 II 1.1C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
weapons, blank.
Cartridges for 1.2C UN0413 II 1.2C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
weapons, blank.
Cartridges for 1.4S UN0014 II None...... ................ 63............ 62......... None....... 25 kg 100 kg 05 .......
weapons, blank or
Cartridges, small
arms, blank.
Cartridges for 1.3C UN0327 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
weapons, blank or
Cartridges, small
arms, blank.
Cartridges for 1.4C UN0338 II 1.4C...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
weapons, blank or
Cartridges, small
arms, blank.
Cartridges for 1.2C UN0328 II 1.2C...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
weapons, inert
projectile.
Cartridges for 1.4S UN0012 II None...... ................ 63............ 62......... None....... 25 kg 100 kg 05 .......
weapons, inert
projectile or
Cartridges, small
arms.
Cartridges for 1.4C UN0339 II 1.4C...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
weapons, inert
projectile or
Cartridges, small
arms.
[[Page 157]]
Cartridges for 1.3C UN0417 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 06 .......
weapons, inert
projectile or
Cartridges, small
arms.
Cartridges for 1.1F UN0005 II 1.1F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
weapons, with
bursting charge.
Cartridges for 1.1E UN0006 II 1.1E...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
weapons, with
bursting charge.
Cartridges for 1.2F UN0007 II 1.2F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
weapons, with
bursting charge.
Cartridges for 1.2E UN0321 II 1.2E...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
weapons, with
bursting charge.
Cartridges for 1.4F UN0348 II 1.4F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
weapons, with
bursting charge.
Cartridges for 1.4E UN0412 II 1.4E...... ................ None.......... 62......... None....... Forbidden 75 kg 02 .......
weapons, with
bursting charge.
Cartridges, oil well 1.3C UN0277 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Cartridges, oil well 1.4C UN0278 II 1.4C...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Cartridges, power 1.3C UN0275 II 1.3C...... ................ None.......... 62......... None....... Forbidden 75 kg 07 .......
device.
Cartridges, power 1.4C UN0276 II 1.4C...... 110 None.......... 62......... None....... Forbidden 75 kg 06 .......
device.
Cartridges, power 1.4S UN0323 II 1.4S...... 110 63............ 62......... None....... 25 kg 100 kg 05 .......
device.
Cartridges, power 1.2C UN0381 II 1.2C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
device.
Cartridges, safety, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
blank, see
Cartridges for
weapons, blank (UN
0014).
Cartridges, safety, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Cartriges for
weapons, inert
projectile, or
Cartridges, small
arms or Cartridges,
power device (UN
0323).
Cartridges, signal.. 1.3G UN0054 II 1.3G...... ................ None.......... 62......... None....... Forbidden 75 kg 07 .......
Cartridges, signal.. 1.4G UN0312 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Cartridges, signal.. 1.4S UN0405 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
D Cartridges, small ORM-D .................. ....... None...... ................ 63............ None....... None....... 30 kg gross 30 kg gross A .......
arms.
D Cartridges power ORM-D ....... None...... 63............ None....... None....... 30 kg gross 30 kg gross A .......
device (used to
project fastening
devices).
Cartridges, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
sporting, see
Cartridges for
weapons, inert
porjectile, or
Cartridges, small
arms.
Cartridges, starter, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
jet engine, see
Cartridges, power
device.
Cases, cartridge, 1.4S UN0055 II 1.4S...... 50 None.......... 62......... None....... 25 kg 100 kg 05 .......
empty with primer.
Cases, cartridges, 1.4C UN0379 II 1.4C...... 50 None.......... 62......... None....... Forbidden 75 kg 06 .......
empty with primer.
Cases, combustible, 1.4C UN0446 II 1.4C...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
empty, without
primer.
Cases, combustible, 1.3C UN0447 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
empty, without
primer.
[[Page 158]]
Casinghead gasoline ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Gasoline.
A W Castor beans or 9 UN2969 II None...... IB8, IP2, IP4, 155........... 204........ 240........ No limit No limit E 34, 40
Castor meal or T3, TP33
Castor pomace or
Castor flake.
G Caustic alkali 8 UN1719 II 8......... B2, IB2, T11, 154........... 202........ 242........ 1 L 30 L A 29
liquids, n.o.s.. TP2, TP27
.................... ........... .................. III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A 29
TP28
Caustic potash, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Potassium hydroxide
etc.
Caustic soda, (etc.) ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sodium
hydroxide etc.
Cells, containing 4.3 UN3292 II 4.3....... ................ 189........... 189........ 189........ 25 kg gross No limit A .......
sodium.
Celluloid, in block, 4.1 UN2000 III 4.1....... ................ None.......... 213........ 240........ 25 kg 100 kg A .......
rods, rolls,
sheets, tubes,
etc., except scrap.
Celluloid, scrap.... 4.2 UN2002 III 4.2....... IB8, IP3 None.......... 213........ 241........ Forbidden Forbidden D .......
Cement, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Adhesives
containing
flammable liquid.
Cerium, slabs, 4.1 UN1333 II 4.1....... IB8, IP2, IP4, None.......... 212........ 240........ 15 kg 50 kg A 74, 91
ingots, or rods. N34
Cerium, turnings or 4.3 UN3078 II 4.3....... A1, IB7, IP2, 151........... 212........ 242........ 15 kg 50 kg E 52
gritty powder. T3, TP33
Cesium or Caesium... 4.3 UN1407 I 4.3....... A7, A19, IB4, None.......... 211........ 242........ Forbidden 15 kg D 52
IP1, N34, N40
Cesium nitrate or 5.1 UN1451 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
Caesium nitrate. IP3, T1, TP33
D Charcoal briquettes, 4.2 NA1361 III 4.2....... IB8, T1, TP33 151........... 213........ 240........ 25 kg 100 kg A 12
shell, screenings,
wood, etc..
Charges, bursting, 1.1D UN0457 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
plastics bonded.
Charges, bursting, 1.2D UN0458 II 1.2D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
plastics bonded.
Charges, bursting, 1.4D UN0459 II 1.4D...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
plastics bonded.
Charges, bursting, 1.4S UN0460 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
plastics bonded.
Charges, demolition. 1.1D UN0048 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
[[Page 159]]
Charges, depth...... 1.1D UN0056 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
Charges, expelling, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
explosive, for fire
extinguishers, see
Cartridges, power
device.
Charges, explosive, 1.1D UN0442 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
commercial without
detonator.
Charges, explosive, 1.2D UN0443 II 1.2D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
commercial without
detonator.
Charges, explosive, 1.4D UN0444 II 1.4D...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
commercial without
detonator.
Charges, explosive, 1.4S UN0445 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
commercial without
detonator.
Charges, propelling. 1.1C UN0271 II 1.1C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Charges, propelling. 1.3C UN0272 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Charges, propelling. 1.2C UN0415 II 1.2C...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Charges, propelling. 1.4C UN0491 II 1.4C...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Charges, propelling, 1.3C UN0242 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
for cannon.
Charges, propelling, 1.1C UN0279 II 1.1C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
for cannon.
Charges, propelling, 1.2C UN0414 II 1.2C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
for cannon.
Charges, shaped, 1.4D UN0237 II 1.4D...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
flexible, linear.
Charges, shaped, 1.1D UN0288 II 1.1D...... 101 None.......... 62......... None....... Forbidden Forbidden 07 .......
flexible, linear.
Charges, shaped, 1.1D UN0059 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
without detonator.
Charges, shaped, 1.2D UN0439 II 1.2D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
without detonator.
Charges, shaped, 1.4D UN0440 II 1.4D...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
without detonator.
Charges, shaped, 1.4S UN0441 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
without detonator.
Charges, 1.1D UN0060 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
supplementary
explosive.
D Chemical kit........ 8 NA1760 II 8......... ................ 154........... 161........ None....... 1 L 30 L B 40
Chemical kits....... 9 UN3316 ....... 9......... 15 161........... 161........ None....... 10 kg 10 kg A .......
Chloral, anhydrous, 6.1 UN2075 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L D 40
stabilized.
Chlorate and borate 5.1 UN1458 II 5.1....... A9, IB8, IP2, 152........... 212........ 240........ 5 kg 25 kg A 56, 58
mixtures. IP4, N34, T3,
TP33
.................... ........... .................. III 5.1....... A9, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
N34, T1, TP33
Chlorate and 5.1 UN1459 II 5.1....... A9, IB8, IP2, 152........... 212........ 240........ 5 kg 25 kg A 56, 58
magnesium chloride IP4, N34, T3,
mixture solid. TP33
III 5.1....... A9, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
N34, T1, TP33
Chlorate and 5.1 UN3407 II 5.1....... A9, IB2, N34, 152........... 202........ 242........ 1 L 5 L A 56, 58,
magnesium chloride T4, TP1 133
mixture solution.
.................... ........... .................. III 5.1....... A9, IB2, N34, 152........... 203........ 241........ 2.5 L 30 L A 56, 58,
T4, TP1 133
Chlorate of potash, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Potassium
chlorate.
Chlorate of soda, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sodium chlorate.
[[Page 160]]
Chlorates, 5.1 UN3210 II 5.1....... IB2, T4, TP1 152........... 202........ 242........ 1 L 5 L B 56, 58,
inorganic, aqueous 133
solution, n.o.s..
.................... ........... .................. III 5.1....... IB2, T4, TP1 152........... 203........ 241........ 2.5 L 30 L B 56, 58,
133
Chlorates, 5.1 UN1461 II 5.1....... A9, IB6, IP2, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
inorganic, n.o.s.. N34, T3, TP33
Chloric acid aqueous 5.1 UN2626 II 5.1....... IB2, T4, TP1 None.......... 229........ None....... Forbidden Forbidden D 56, 58
solution, with not
more than 10
percent chloric
acid.
Chloride of ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
phosphorus, see
Phosphorus
trichloride.
Chloride of sulfur, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sulfur chloride.
Chlorinated lime, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Calcium
hypochlorite
mixtures, etc.
Chlorine............ 2.3 UN1017 ....... 2.3, 8.... 2, B9, B14, T50, None.......... 304........ 314, 315... Forbidden Forbidden D 40, 51,
TP19 55, 62,
68, 89,
90
Chlorine azide...... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
D Chlorine dioxide, 5.1 NA9191 II 5.1, 6.1.. ................ None.......... 229........ None....... Forbidden Forbidden E .......
hydrate, frozen.
Chlorine dioxide Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(not hydrate).
Chlorine 2.3 UN2548 ....... 2.3, 5.1, 1, B7, B9, B14 None.......... 304........ 314........ Forbidden Forbidden D 40, 89,
pentafluoride. 8. 90
Chlorine trifluoride 2.3 UN1749 ....... 2.3, 5.1, 2, B7, B9, B14 None.......... 304........ 314........ Forbidden Forbidden D 40, 89,
8. 90
Chlorite solution... 8 UN1908 II 8......... A3, A6, A7, B2, 154........... 202........ 242........ 1 L 30 L B 26, 44,
IB2, N34, T7, 89,
TP2, TP24 100,
141
.................... ........... .................. III 8......... A3, A6, A7, B2, 154........... 203........ 241........ 5 L 60 L B 26, 44,
IB3, N34, T4, 89,
TP2, TP24 100,
141
Chlorites, 5.1 UN1462 II 5.1....... A7, IB6, IP2, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
inorganic, n.o.s.. N34, T3, TP33
[[Page 161]]
1-Chloro-1,1- 2.1 UN2517 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
difluoroethane or
Refrigerant gas R
142b.
3-Chloro-4- 6.1 UN2236 II 6.1....... IB2 153........... 202........ 243........ 5 L 60 L B 40
methylphenyl
isocyanate, liquid.
3-Chloro-4- 6.1 UN3428 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 40
methylphenyl T3, TP33
isocyanate, solid.
1-Chloro-1,2,2,2- 2.2 UN1021 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
tetrafluoroethaneor
Refrigerant gas R
124.
4-Chloro-o-toluidine 6.1 UN1579 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
hydrochloride, TP33
solid.
4-Chloro-o-toluidine 6.1 UN3410 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
hydrochloride,
solution.
1-Chloro-2,2,2- 2.2 UN1983 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
trifluoroethane or
Refrigerant gas R
133a.
Chloroacetic acid, 6.1 UN3250 II 6.1, 8.... IB1, T7, TP3, None.......... 202........ 243........ Forbidden Forbidden C 40
molten. TP28
Chloroacetic acid, 6.1 UN1751 II 6.1, 8.... A3, A7, IB8, 153........... 212........ 242........ 15 kg 50 kg A 40
solid. IP4, N34, T3,
TP33
Chloroacetic acid, 6.1 UN1750 II 6.1, 8.... A7, IB2, N34, 153........... 202........ 243........ 1 L 30 L C 40
solution. T7, TP2
Chloroacetone, 6.1 UN1695 I 6.1, 3, 8. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 21, 40,
stabilized. B74, N12, N32, 100
N34, T20, TP2,
TP13, TP38, TP45
Chloroacetone Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(unstabilized).
+ Chloroacetonitrile.. 6.1 UN2668 II 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A 12, 40,
B74, IB9, T20, 52
TP2, TP38, TP45
Chloroacetophenone, 6.1 UN3416 II 6.1....... A3, IB2, N12, None.......... 202........ 243........ Forbidden 60 L D 12, 40
liquid, (CN). N32, N33, T7,
TP2, TP13
Chloroacetophenone, 6.1 UN1697 II 6.1....... A3, IB8, IP2, None.......... 212........ None....... Forbidden 100 kg D 12, 40
solid, (CN). IP4, N12, N32,
N33, N34, T3,
TP2, TP13, TP33
Chloroacetyl 6.1 UN1752 I 6.1, 8.... 2, B3, B8, B9, None.......... 227........ 244........ Forbidden Forbidden D 40
chloride. B14, B32, B74,
B77, N34, N43,
T20, TP2, TP13,
TP38, TP45
Chloroanilines, 6.1 UN2019 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 52
liquid.
Chloroanilines, 6.1 UN2018 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
solid. T3, TP33
Chloroanisidines.... 6.1 UN2233 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Chlorobenzene....... 3 UN1134 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Chlorobenzol, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chlorobenzene.
[[Page 162]]
Chlorobenzotrifluori 3 UN2234 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A 40
des.
Chlorobenzyl 6.1 UN2235 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
chlorides, liquid.
Chlorobenzyl 6.1 UN3427 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
chlorides, solid. TP33
Chlorobutanes....... 3 UN1127 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Chlorocresols 6.1 UN2669 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 12
solution.
.................... ........... .................. III 6.1....... IB3, T7, TP2 153........... 203........ 241........ 60 L 220 L A 12
Chlorocresols, solid 6.1 UN3437 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 12
T3, TP33
Chlorodifluorobromom 2.2 UN1974 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
ethane or
Refrigerant gas R
12B1.
Chlorodifluoromethan 2.2 UN1973 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
e and
chloropentafluoroet
hane mixture or
Refrigerant gas R
502 with fixed
boiling point, with
approximately 49
percent
chlorodifluorometha
ne.
Chlorodifluoromethan 2.2 UN1018 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
e or Refrigerant
gas R 22.
+ Chlorodinitrobenzene 6.1 UN1577 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L B 91
s, liquid..
+ Chlorodinitrobenzene 6.1 UN3441 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 91
s, solid. T3, TP33
2-Chloroethanal..... 6.1 UN2232 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, T20, TP2,
TP13, TP38, TP45
Chloroform.......... 6.1 UN1888 III 6.1....... IB3, N36, T7, 153........... 203........ 241........ 60 L 220 L A 40
TP2
G Chloroformates, 6.1 UN2742 II 6.1, 8, 3. 5, IB1, T7, TP2 153........... 202........ 243........ 1 L 30 L A 12, 13,
toxic, corrosive, 21, 25,
flammable, n.o.s.. 40, 100
G Chloroformates, 6.1 UN3277 II 6.1, 8.... IB2, T8, TP2, 153........... 202........ 243........ 1 L 30 L A 12, 13,
toxic, corrosive, TP13, TP28 25, 40
n.o.s..
Chloromethyl 6.1 UN2745 II 6.1, 8.... IB2, T7, TP2, 153........... 202........ 243........ 1 L 30 L A 12, 13,
chloroformate. TP13 21, 25,
40, 100
Chloromethyl ethyl 3 UN2354 II 3, 6.1.... IB2, T7, TP1, 150........... 202........ 243........ 1 L 60 L E 40
ether. TP13
[[Page 163]]
Chloronitroanilines. 6.1 UN2237 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
+ Chloronitrobenzene, 6.1 UN3409 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
liquid ortho.
+ Chloronitrobenzenes, 6.1 UN1578 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
solid meta or para. T3, TP33
Chloronitrotoluenes, 6.1 UN2433 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 44, 89,
liquid. 100,
141
Chloronitrotoluenes, 6.1 UN3457 III 6.1....... IB8, IP3,T1, 153........... 213........ 240........ 25 kg 200 kg A .......
solid. TP33
Chloropentafluoroeth 2.2 UN1020 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
ane or Refrigerant
gas R 115.
Chlorophenolates, 8 UN2904 III 8......... IB3 154........... 203........ 241........ 5 L 60 L A .......
liquid or
Phenolates, liquid.
Chlorophenolates, 8 UN2905 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
solid or TP33
Phenolates, solid.
Chlorophenols, 6.1 UN2021 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
liquid.
Chlorophenols, solid 6.1 UN2020 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP1, TP33
Chlorophenyltrichlor 8 UN1753 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
osilane. N34, T7, TP2
+ Chloropicrin........ 6.1 UN1580 I 6.1....... 2, B7, B9, B14, None.......... 227........ 244........ Forbidden Forbidden D 40
B32, B46, B74,
T20, TP2, TP13,
TP38, TP45
Chloropicrin and 2.3 UN1581 ....... 2.3....... 2, B9, B14, T50 None.......... 193........ 314, 315... Forbidden Forbidden D 25, 40
methyl bromide
mixtures.
Chloropicrin and 2.3 UN1582 ....... 2.3....... 2, T50 None.......... 193........ 245........ Forbidden Forbidden D 25, 40
methyl chloride
mixtures.
Chloropicrin ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixture, flammable
(pressure not
exceeding 14.7 psia
at 115 degrees F
flash point below
100 degrees F) see
Toxic liquids,
flammable, etc.
Chloropicrin 6.1 UN1583 I 6.1....... 5 None.......... 201........ 243........ Forbidden Forbidden C 40
mixtures, n.o.s..
.................... ........... .................. II 6.1....... IB2 153........... 202........ 243........ Forbidden Forbidden C 40
.................... ........... .................. III 6.1....... IB3 153........... 203........ 241........ Forbidden Forbidden C 40
D Chloropivaloyl 6.1 NA9263 I 6.1, 8.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden B 40
chloride. B74, T20, TP4,
TP12, TP13,
TP38, TP45
Chloroplatinic acid, 8 UN2507 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
solid. TP33
Chloroprene, 3 UN1991 I 3, 6.1.... B57, T14, TP2, None.......... 201........ 243........ Forbidden 30 L D 40
stabilized. TP13
Chloroprene, Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
uninhibited.
1-Chloropropane..... 3 UN1278 II 3......... IB2, IP8, N34, None.......... 202........ 242........ Forbidden 60 L E .......
T7, TP2
[[Page 164]]
2-Chloropropane..... 3 UN2356 I 3......... N36, T11, TP2, 150........... 201........ 243........ 1 L 30 L E .......
TP13
3-Chloropropanol-1.. 6.1 UN2849 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
2-Chloropropene..... 3 UN2456 I 3......... A3, N36, T11, 150........... 201........ 243........ 1 L 30 L E .......
TP2
2-Chloropropionic 8 UN2511 III 8......... IB3, T4, TP2 154........... 203........ 241........ 5 L 60 L A 8
acid.
2-Chloropyridine.... 6.1 UN2822 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40
Chlorosilanes, 8 UN2986 II 8, 3...... IB2, T11, TP2, None.......... 202........ 243........ 1 L 30 L C 40
corrosive, TP27
flammable, n.o.s..
Chlorosilanes, 8 UN2987 II 8......... B2, IB2, T14, 154........... 202........ 242........ 1 L 30 L C 40
corrosive, n.o.s.. TP2, TP27
Chlorosilanes, 3 UN2985 II 3, 8...... IB1, T11, TP2, 150........... 201........ 243........ 1 L 5 L B 40
flammable, TP13, TP27
corrosive, n.o.s..
Chlorosilanes, 6.1 UN3361 II 6.1, 8.... IB1, T11, TP2, 153........... 202........ 243........ 1 L 30 L C 40
toxic, corrosive, TP13
n.o.s..
Chlorosilanes, 6.1 UN3362 II 6.1, 3, 8. IB1, T11, TP2, 153........... 202........ 243........ 1 L 30 L C 40, 125
toxic, corrosive, TP13
flammable, n.o.s..
Chlorosilanes, water- 4.3 UN2988 I 4.3, 3, 8. A2, T10, TP2, None.......... 201........ 244........ Forbidden 1 L D 21, 28,
reactive, TP7, TP13 40, 49,
flammable, 100
corrosive, n.o.s..
+ Chlorosulfonic acid 8 UN1754 I 8, 6.1.... 2, B9, B10, B14, None.......... 227........ 244........ Forbidden Forbidden C 40
(with or without B32, B74, T20,
sulfur trioxide). TP2, TP12, TP38,
TP45
Chlorotoluenes...... 3 UN2238 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Chlorotoluidines, 6.1 UN3429 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
liquid.
Chlorotoluidines, 6.1 UN2239 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
solid. TP33
Chlorotrifluorometha 2.2 UN2599 ....... 2.2....... ................ 306........... 304........ 314, 315... 75 kg 150 kg A .......
ne and
trifluoromethane
azeotropic mixture
or Refrigerant gas
R 503 with
approximately 60
percent
chlorotrifluorometh
ane.
Chlorotrifluorometha 2.2 UN1022 ....... 2.2....... ................ 306........... 304........ 314, 315... 75 kg 150 kg A .......
ne or Refrigerant
gas R 13.
Chromic acid 8 UN1755 II 8......... B2, IB2, T8, 154........... 202........ 242........ 1 L 30 L C 40, 44,
solution. TP2, TP12 89,
100,
141
[[Page 165]]
.................... ........... .................. III 8......... IB3, T4, TP1, 154........... 203........ 241........ 5 L 60 L C 40, 44,
TP12 89,
100,
141
Chromic anhydride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Chromium
trioxide, anhydrous.
Chromic fluoride, 8 UN1756 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 52
solid. T3, TP33
Chromic fluoride, 8 UN1757 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A .......
solution.
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Chromium nitrate.... 5.1 UN2720 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
IP3, T1, TP33
Chromium oxychloride 8 UN1758 I 8......... A3, A6, A7, B10, None.......... 201........ 243........ 0.5 L 2.5 L C 40, 66,
N34, T10, TP2, 74, 89,
TP12 90
Chromium trioxide, 5.1 UN1463 II 5.1, 8.... IB8, IP4, T3, None.......... 212........ 242........ 5 kg 25 kg A .......
anhydrous. TP33
Chromosulfuric acid. 8 UN2240 I 8......... A3, A6, A7, B4, None.......... 201........ 243........ 0.5 L 2.5 L B 40, 66,
B6, N34, T10, 74, 89,
TP2, TP12, TP13 90
Chromyl chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Chromium
oxychloride.
Cigar and cigarette ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
lighters, charged
with fuel, see
Lighters or Lighter
refills containing
flammable gas..
Coal briquettes, hot Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Coal gas, compressed 2.3 UN1023 ....... 2.3, 2.1.. 3 None.......... 302........ 314, 315... Forbidden Forbidden D 40
Coal tar 3 UN1136 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
distillates,
flammable.
.................... ........... .................. III 3......... B1, IB3, T4, 150........... 203........ 242........ 60 L 220 L A .......
TP1, TP29
Coal tar dye, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
corrosive, liquid,
n.o.s, see Dyes,
liquid or solid,
n.o.s. or Dye
intermediates,
liquid or solid,
corrosive, n.o.s..
Coating solution 3 UN1139 I 3......... T11, TP1, TP8, 150........... 201........ 243........ 1 L 30 L E .......
(includes surface TP27
treatments or
coatings used for
industrial or other
purposes such as
vehicle
undercoating, drum
or barrel lining).
.................... ........... .................. II 3......... 149, IB2, T4, 150........... 202........ 242........ 5 L 60 L B .......
TP1, TP8
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Cobalt naphthenates, 4.1 UN2001 III 4.1....... A19, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg A .......
powder. T1, TP33
Cobalt resinate, 4.1 UN1318 III 4.1....... A1, A19, IB6, 151........... 213........ 240........ 25 kg 100 kg A .......
precipitated. T1, TP33
[[Page 166]]
Coke, hot........... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Collodion, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrocellulose etc.
D G Combustible liquid, Comb liq NA1993 III None...... IB3, T1, T4, TP1 150........... 203........ 241........ 60 L 220 L A .......
n.o.s..
G Components, 1.2B UN0382 II 1.2B...... 101 None.......... 62......... None....... Forbidden Forbidden 11 .......
explosive train,
n.o.s..
G Components, 1.4B UN0383 II 1.4B...... 101 None.......... 62......... None....... Forbidden 75 kg 06 .......
explosive train,
n.o.s..
G Components, 1.4S UN0384 II 1.4S...... 101 None.......... 62......... None....... 25 kg 100 kg 05 .......
explosive train,
n.o.s..
G Components, 1.1B UN0461 II 1.1B...... 101 None.......... 62......... None....... Forbidden Forbidden 11 .......
explosive train,
n.o.s..
Composition B, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexolite, etc.
D G Compounds, cleaning 8 NA1760 I 8......... A7, B10, T14, None.......... 201........ 243........ 0.5 L 2.5 L B 40
liquid. TP2, TP27
.................... ........... .................. II 8......... B2, IB2, N37, 154........... 202........ 242........ 1 L 30 L B 40
T11, TP2, TP27
.................... ........... .................. III 8......... IB3, N37, T7, 154........... 203........ 241........ 5 L 60 L A 40
TP1, TP28
D G Compounds, cleaning 3 NA1993 I 3......... T11, TP1 150........... 201........ 243........ 1 L 30 L E .......
liquid.
.................... ........... .................. II 3......... IB2, T7, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8, TP28
.................... ........... .................. III 3......... B1, B52, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T4, TP1, TP29
D G Compounds, tree 8 NA1760 I 8......... A7, B10, T14, None.......... 201........ 243........ 0.5 L 2.5 L B 40
killing, liquid or TP2, TP27
Compounds, weed
killing, liquid.
.................... ........... .................. II 8......... B2, IB2, N37, 154........... 202........ 242........ 1 L 30 L B 40
T11, TP2, TP27
.................... ........... .................. III 8......... IB3, N37, T7, 154........... 203........ 241........ 5 L 60 L A 40
TP1, TP28
D G Compounds, tree 3 NA1993 I 3......... T11, TP1 150........... 201........ 243........ 1 L 30 L E .......
killing, liquid or
Compounds, weed
killing, liquid.
.................... ........... .................. II 3......... IB2, T7, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8, TP28
.................... ........... .................. III 3......... B1, B52, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T4, TP1, TP29
[[Page 167]]
D G Compounds, tree 6.1 NA2810 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
killing, liquid or TP27
Compounds, weed
killing, liquid.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A 40
TP28
G Compressed gas, 2.1 UN1954 ....... 2.1....... ................ 306........... 302, 305... 314, 315... Forbidden 150 kg D 40
flammable, n.o.s..
G Compressed gas, 2.2 UN1956 ....... 2.2....... ................ 306, 307...... 302, 305... 314, 315... 75 kg 150 kg A .......
n.o.s..
G Compressed gas, 2.2 UN3156 ....... 2.2, 5.1.. A14 306........... 302........ 314, 315... 75 kg 150 kg D .......
oxidizing, n.o.s..
G I Compressed gas, 2.3 UN3304 ....... 2.3, 8.... 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, corrosive,
n.o.s. Inhalation
Hazard Zone A.
G I Compressed gas, 2.3 UN3304 ....... 2.3, 8.... 2, B9, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, corrosive,
n.o.s. Inhalation
Hazard Zone B.
G I Compressed gas, 2.3 UN3304 ....... 2.3, 8.... 3, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, corrosive,
n.o.s. Inhalation
Hazard Zone C.
G I Compressed gas, 2.3 UN3304 ....... 2.3, 8.... 4 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, corrosive,
n.o.s. Inhalation
Hazard Zone D.
G I Compressed gas, 2.3 UN3305 ....... 2.3, 2.1, 1 None.......... 192........ 245........ Forbidden Forbidden D 17, 40
toxic, flammable, 8.
corrosive, n.o.s.
Inhalation Hazard
Zone A.
G I Compressed gas, 2.3 UN3305 ....... 2.3, 2.1, 2, B9, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 17, 40
toxic, flammable, 8.
corrosive, n.o.s.
Inhalation Hazard
Zone B.
G I Compressed gas, 2.3 UN3305 ....... 2.3, 2.1, 3, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 17, 40
toxic, flammable, 8.
corrosive, n.o.s.
Inhalation Hazard
Zone C.
G I Compressed gas, 2.3 UN3305 ....... 2.3, 2.1, 4 None.......... 302, 305... 314, 315... Forbidden Forbidden D 17, 40
toxic, flammable, 8.
corrosive, n.o.s.
Inhalation Hazard
Zone D.
G Compressed gas, 2.3 UN1953 ....... 2.3, 2.1.. 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
hazard Zone A.
G Compressed gas, 2.3 UN1953 ....... 2.3, 2.1.. 2, B9, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
hazard Zone B.
G Compressed gas, 2.3 UN1953 ....... 2.3, 2.1.. 3, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
Hazard Zone C.
G Compressed gas, 2.3 UN1953 ....... 2.3, 2.1.. 4 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
Hazard Zone D.
[[Page 168]]
G Compressed gas, 2.3 UN1955 ....... 2.3....... 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, n.o.s.
Inhalation Hazard
Zone A.
G Compressed gas, 2.3 UN1955 ....... 2.3....... 2, B9, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, n.o.s.
Inhalation Hazard
Zone B.
G Compressed gas, 2.3 UN1955 ....... 2.3....... 3, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, n.o.s.
Inhalation Hazard
Zone C.
G Compressed gas, 2.3 UN1955 ....... 2.3....... 4 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, n.o.s.
Inhalation Hazard
Zone D.
G I Compressed gas, 2.3 UN3306 ....... 2.3, 5.1, 1 None.......... 192........ 244........ Forbidden Forbidden D 40, 89,
toxic, oxdizing, 8. 90
corrosive, n.o.s.
Inhalation Hazard
Zone A.
G I Compressed gas, 2.3 UN3306 ....... 2.3, 5.1, 2, B9, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40, 89,
toxic, oxidizing, 8. 90
corrosive, n.o.s.
Inhalation Hazard
Zone B.
G I Compressed gas, 2.3 UN3306 ....... 2.3, 5.1, 3, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40, 89,
toxic, oxidizing, 8. 90
corrosive, n.o.s.
Inhalation Hazard
Zone C.
G I Compressed gas, 2.3 UN3306 ....... 2.3, 5.1, 4 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40, 89,
toxic, oxidizing, 8. 90
corrosive, n.o.s.
Inhalation Hazard
Zone D.
G Compressed gas, 2.3 UN3303 ....... 2.3, 5.1.. 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, oxidizing,
n.o.s. Inhalation
Hazard Zone A.
G Compressed gas, 2.3 UN3303 ....... 2.3, 5.1.. 2, B9, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, oxidizing,
n.o.s. Inhalation
Hazard Zone B.
G Compressed gas, 2.3 UN3303 ....... 2.3, 5.1.. 3, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, oxidizing,
n.o.s. Inhalation
Hazard Zone C.
G Compressed gas, 2.3 UN3303 ....... 2.3, 5.1.. 4 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, oxidizing,
n.o.s. Inhalation
Hazard Zone D.
D Consumer commodity.. ORM-D .................. ....... None...... ................ 156, 306...... 156, 306... None....... 30 kg gross 30 kg gross A .......
Contrivances, water- 1.2L UN0248 II 1.2L...... 101 None.......... 62......... None....... Forbidden Forbidden 08 8E,
activated, with 14E,
burster, expelling 15E,
charge or 17E
propelling charge.
[[Page 169]]
Contrivances, water- 1.3L UN0249 II 1.3L...... 101 None.......... 62......... None....... Forbidden Forbidden 08 8E,
activated, with 14E,
burster, expelling 15E,
charge or 17E
propelling charge.
Copper acetoarsenite 6.1 UN1585 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Copper acetylide.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Copper amine azide.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Copper arsenite..... 6.1 UN1586 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Copper based 3 UN2776 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticides, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Copper based 6.1 UN3010 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Copper based 6.1 UN3009 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, 153........... 203........ 242........ 60 L 220 L A 40
TP2, TP28
Copper based 6.1 UN2775 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Copper chlorate..... 5.1 UN2721 II 5.1....... A1, IB8, IP2, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
IP4, T3, TP33
Copper chloride..... 8 UN2802 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
TP33
Copper cyanide...... 6.1 UN1587 II 6.1....... IB8, IP2, IP4, 153........... 204........ 242........ 25 kg 100 kg A 52
T3, TP33
Copper selenate, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Selenates or
Selenites.
Copper selenite, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Selenates or
Selenites.
Copper tetramine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrate.
A W Copra............... 4.2 UN1363 III 4.2....... IB8, IP3, IP7 None.......... 213........ 241........ Forbidden Forbidden A 13, 19,
48, 119
Cord, detonating, 1.1D UN0065 II 1.1D...... 102 63(a)......... 62......... None....... Forbidden Forbidden 07 .......
flexible.
Cord, detonating, 1.4D UN0289 II 1.4D...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
flexible.
[[Page 170]]
Cord detonating or 1.2D UN0102 II 1.2D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Fuse detonating
metal clad.
Cord, detonating or 1.1D UN0290 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Fuse, detonating
metal clad.
Cord, detonating, 1.4D UN0104 II 1.4D...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
mild effect or
Fuse, detonating,
mild effect metal
clad.
Cord, igniter....... 1.4G UN0066 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Cordeau detonant ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
fuse, see Cord,
detonating, etc;
Cord, detonating,
flexible.
Cordite, see Powder, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
smokeless.
G Corrosive liquid, 8 UN3264 I 8......... A6, B10, T14, None.......... 201........ 243........ 0.5 L 2.5 L B 40
acidic, inorganic, TP2, TP27
n.o.s..
.................... ........... .................. II 8......... A6, B2, IB2, 154........... 202........ 242........ 1 L 30 L B 40
T11, TP2, TP27
.................... ........... .................. III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A 40
TP28
G Corrosive liquid, 8 UN3265 I 8......... A6, B10, T14, None.......... 201........ 243........ 0.5 L 2.5 L B 40
acidic, organic, TP2, TP27
n.o.s..
.................... ........... .................. II 8......... B2, IB2, T11, 154........... 202........ 242........ 1 L 30 L B 40
TP2, TP27
.................... ........... .................. III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A 40
TP28
G Corrosive liquid, 8 UN3266 I 8......... A6, T14, TP2, None.......... 201........ 243........ 0.5 L 2.5 L B 40, 52
basic, inorganic, TP27
n.o.s..
.................... ........... .................. II 8......... B2, IB2, T11, 154........... 202........ 242........ 1 L 30 L B 40, 52
TP2, TP27
.................... ........... .................. III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A 40, 52
TP28
G Corrosive liquid, 8 UN3267 I 8......... A6, B10, T14, None.......... 201........ 243........ 0.5 L 2.5 L B 40, 52
basic, organic, TP2, TP27
n.o.s..
.................... ........... .................. II 8......... B2, IB2, T11, 154........... 202........ 242........ 1 L 30 L B 40, 52
TP2, TP27
.................... ........... .................. III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A 40, 52
TP28
G Corrosive liquid, 8 UN3301 I 8, 4.2.... A6, B10 None.......... 201........ 243........ 0.5 L 2.5 L D .......
self-heating,
n.o.s..
.................... ........... .................. II 8, 4.2.... B2, IB1 154........... 202........ 242........ 1 L 30 L D .......
[[Page 171]]
G Corrosive liquids, 8 UN2920 I 8, 3...... A6, B10, T14, None.......... 201........ 243........ 0.5 L 2.5 L C 25, 40
flammable, n.o.s.. TP2, TP27
.................... ........... .................. II 8, 3...... B2, IB2, T11, None.......... 202........ 243........ 1 L 30 L C 25, 40
TP2, TP27
G Corrosive liquids, 8 UN1760 I 8......... A6, A7, B10, None.......... 201........ 243........ 0.5 L 2.5 L B 40
n.o.s.. T14, TP2, TP27
.................... ........... .................. II 8......... B2, IB2, T11, 154........... 202........ 242........ 1 L 30 L B 40
TP2, TP27
.................... ........... .................. III 8......... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L A 40
TP28
G Corrosive liquids, 8 UN3093 I 8, 5.1.... A6, A7 None.......... 201........ 243........ Forbidden 2.5 L C 89
oxidizing, n.o.s..
.................... ........... .................. II 8, 5.1.... A6, A7, IB2 None.......... 202........ 243........ 1 L 30 L C 89
G Corrosive liquids, 8 UN2922 I 8, 6.1.... A6, A7, B10, None.......... 201........ 243........ 0.5 L 2.5 L B 40
toxic, n.o.s.. T14, TP2, TP13,
TP27
II 8, 6.1.... B3, IB2, T7, TP2 154........... 202........ 243........ 1 L 30 L B 40
III 8, 6.1.... IB3, T7, TP1, 154........... 203........ 241........ 5 L 60 L B 40
TP28
G Corrosive liquids, 8 UN3094 I 8, 4.3.... A6, A7 None.......... 201........ 243........ Forbidden 1 L E .......
water-reactive,
n.o.s..
.................... ........... .................. II 8, 4.3.... A6, A7 None.......... 202........ 243........ 1 L 5 L E .......
G Corrosive solid, 8 UN3260 I 8......... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 25 kg B .......
acidic, inorganic, TP33
n.o.s..
.................... ........... .................. II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg B .......
T3, TP33
.................... ........... .................. III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
TP33
G Corrosive solid, 8 UN3261 I 8......... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 25 kg B .......
acidic, organic, TP33
n.o.s..
.................... ........... .................. II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg B .......
T3, TP33
.................... ........... .................. III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
TP33
G Corrosive solid, 8 UN3262 I 8......... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 25 kg B 52
basic, inorganic, TP33
n.o.s..
.................... ........... .................. II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg B 52
T3, TP33
.................... ........... .................. III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 52
TP33
G Corrosive solid, 8 UN3263 I 8......... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 25 kg B 52
basic, organic, TP33
n.o.s..
.................... ........... .................. II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg B 52
T3, TP33
.................... ........... .................. III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 52
TP33
G Corrosive solids, 8 UN2921 I 8, 4.1.... IB6, T6, TP33 None.......... 211........ 242........ 1 kg 25 kg B 12, 25
flammable, n.o.s..
.................... ........... .................. II 8, 4.1.... IB8, IP2, IP4, None.......... 212........ 242........ 15 kg 50 kg B 12, 25
T3, TP33
[[Page 172]]
G Corrosive solids, 8 UN1759 I 8......... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 25 kg B .......
n.o.s.. TP33
.................... ........... .................. II 8......... 128, IB8, IP2, 154........... 212........ 240........ 15 kg 50 kg A .......
IP4, T3, TP33
.................... ........... .................. III 8......... 128, IB8, IP3, 154........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
G Corrosive solids, 8 UN3084 I 8, 5.1.... T6, TP33 None.......... 211........ 242........ 1 kg 25 kg C .......
oxidizing, n.o.s..
.................... ........... .................. II 8, 5.1.... IB6, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg C .......
TP33
G Corrosive solids, 8 UN3095 I 8, 4.2.... T6, TP33 None.......... 211........ 243........ 1 kg 25 kg C .......
self-heating,
n.o.s..
.................... ........... .................. II 8, 4.2.... IB6, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg C .......
TP33
G Corrosive solids, 8 UN2923 I 8, 6.1.... IB7, T6, TP33 None.......... 211........ 242........ 1 kg 25 kg B 40
toxic, n.o.s..
.................... ........... .................. II 8, 6.1.... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg B 40
T3, TP33
.................... ........... .................. III 8, 6.1.... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg B 40, 95
TP33
G Corrosive solids, 8 UN3096 I 8, 4.3.... IB4, IP1, T6, None.......... 211........ 243........ 1 kg 25 kg D .......
water-reactive, TP33
n.o.s..
.................... ........... .................. II 8, 4.3.... IB6, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg D .......
TP33
D W Cotton.............. 9 NA1365 ....... 9......... 137, IB8, IP2, None.......... None....... None....... No limit No limit A .......
IP4, W41
A W Cotton waste, oily.. 4.2 UN1364 III 4.2....... IB8, IP3, IP7 None.......... 213........ None....... Forbidden Forbidden A 54
A I W Cotton, wet......... 4.2 UN1365 III 4.2....... IB8, IP3, IP7 None.......... 204........ 241........ Forbidden Forbidden A .......
Coumarin derivative 3 UN3024 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticides, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Coumarin derivative 6.1 UN3026 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A 40
TP28
[[Page 173]]
Coumarin derivative 6.1 UN3025 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, 153........... 203........ 242........ 60 L 220 L A 40
TP1, TP28
Coumarin derivative 6.1 UN3027 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Cresols, liquid..... 6.1 UN2076 II 6.1, 8.... IB2, IP2, IP4, 153........... 202........ 243........ 1 L 30 L B .......
T7, TP2
Cresols, solid...... 6.1 UN3455 II 6.1, 8.... IB8, IP2, IP4, 153........... 212........ 242........ 15 kg 50 kg B .......
T3, TP33
Cresylic acid....... 6.1 UN2022 II 6.1, 8.... IB2, T7, TP2, 153........... 202........ 243........ 1 L 30 L B .......
TP13
Crotonaldehyde, 6.1 UN1143 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden B 40
stabilized. B74, B77, T20,
TP2, TP13, TP38,
TP45
Crotonic acid liquid 8 UN2823 III 8......... IB8, T1 154........... 203........ 241........ 5 L 60 L A 12
Crotonic acid, solid 8 UN2823 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 12
TP33
Crotonylene......... 3 UN1144 I 3......... T11, TP2 150........... 201........ 243........ 1 L 30 L E .......
Cupriethylenediamine 8 UN1761 II 8, 6.1.... IB2, T7, TP2 154........... 202........ 243........ 1 L 30 L A .......
solution.
.................... ........... .................. III 8, 6.1.... IB3, T7, TP1, 154........... 203........ 242........ 5 L 60 L A 95
TP28
Cutters, cable, 1.4S UN0070 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
explosive.
Cyanide or cyanide ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixtures, dry, see
Cyanides,
inorganic, solid,
n.o.s..
Cyanide solutions, 6.1 UN1935 I 6.1....... B37, T14, TP2, None.......... 201........ 243........ 1 L 30 L B 40, 52
n.o.s.. TP13, TP27
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L A 40, 52
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40, 52
TP13, TP28
Cyanides, inorganic, 6.1 UN1588 I 6.1....... IB7, IP1, N74, None.......... 211........ 242........ 5 kg 50 kg A 52
solid, n.o.s.. N75, T6, TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 52
N74, N75, T3,
TP33
.................... ........... .................. III 6.1....... IB8, IP3, N74, 153........... 213........ 240........ 100 kg 200 kg A 52
N75, T1, TP33
Cyanogen............ 2.3 UN1026 ....... 2.3, 2.1.. 2 None.......... 304........ 245........ Forbidden Forbidden D 40
[[Page 174]]
Cyanogen bromide.... 6.1 UN1889 I 6.1, 8.... A6, A8, T6, TP33 None.......... 211........ 242........ 1 kg 15 kg D 40
Cyanogen chloride, 2.3 UN1589 ....... 2.3, 8.... 1 None.......... 192........ 245........ Forbidden Forbidden D 40
stabilized.
Cyanuric chloride... 8 UN2670 II 8......... IB8, IP2, IP4, None.......... 212........ 240........ 15 kg 50 kg A 12, 40
T3, TP33
Cyanuric triazide... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Cyclobutane......... 2.1 UN2601 ....... 2.1....... ................ 306........... 304........ 314, 315... Forbidden 150 kg B 40
Cyclobutyl 6.1 UN2744 II 6.1, 8, 3. IB1, T7, TP2, 153........... 202........ 243........ 1 L 30 L A 12, 13,
chloroformate. TP13 21, 25,
40, 100
1,5,9- 6.1 UN2518 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 40
Cyclododecatriene.
Cycloheptane........ 3 UN2241 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
Cycloheptatriene.... 3 UN2603 II 3, 6.1.... IB2, T7, TP1, 150........... 202........ 243........ 1 L 60 L E 40
TP13
Cycloheptene........ 3 UN2242 II 3......... B1, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Cyclohexane......... 3 UN1145 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
Cyclohexanone....... 3 UN1915 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Cyclohexene......... 3 UN2256 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
Cyclohexenyltrichlor 8 UN1762 II 8......... A7, B2, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
osilane. N34, T7, TP2,
TP13
Cyclohexyl acetate.. 3 UN2243 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Cyclohexyl 6.1 UN2488 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
isocyanate. B74, B77, T20,
TP2, TP13, TP38,
TP45
Cyclohexyl mercaptan 3 UN3054 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A 40, 95
Cyclohexylamine..... 8 UN2357 II 8, 3...... IB2, T7, TP2 None.......... 202........ 243........ 1 L 30 L A 40
Cyclohexyltrichloros 8 UN1763 II 8......... A7, B2, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
ilane. N34, T7, TP2,
TP13
Cyclonite and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
cyclotetramethylene
tetranitramine
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
[[Page 175]]
Cyclonite and HMX ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
Cyclonite and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
octogen mixtures,
wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
Cyclonite, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Cyclotrimethylenetr
initramine, etc.
Cyclooctadiene ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
phosphines, see 9-
Phosphabicyclononan
es.
Cyclooctadienes..... 3 UN2520 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Cyclooctatetraene... 3 UN2358 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Cyclopentane........ 3 UN1146 II 3......... IB2, T7, TP1 150........... 202........ 242........ 5 L 60 L E .......
Cyclopentane, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
methyl, see
Methylcyclopentane.
Cyclopentanol....... 3 UN2244 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Cyclopentanone...... 3 UN2245 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Cyclopentene........ 3 UN2246 II 3......... IB2, IP8, T7, 150........... 202........ 242........ 5 L 60 L E .......
TP2
Cyclopropane........ 2.1 UN1027 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
Cyclotetramethylene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetranitramine (dry
or unphlegmatized)
(HMX).
Cyclotetramethylenet 1.1D UN0484 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
etranitramine,
desensitized or
Octogen,
desensitized or
HMX, desensitized.
Cyclotetramethylenet 1.1D UN0226 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
etranitramine,
wetted or HMX,
wetted or Octogen,
wetted with not
less than 15
percent water, by
mass.
Cyclotrimethylenenit ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
ramine and octogen,
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized, etc.
Cyclotrimethylenetri ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitramine and
cyclotetramethylene
tetranitramine
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
[[Page 176]]
Cyclotrimethylenetri ........... .......... .............. ........... ........... ........... ........... .......
nitramine and HMX
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
Cyclotrimethylenetri 1.1D UN0483 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
nitramine,
desensitized or
Cyclonite,
desensitized or
Hexogen,
desensitized or
RDX, desensitized.
Cyclotrimethylenetri 1.1D UN0072 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
nitramine, wetted
or Cyclonite,
wetted or Hexogen,
wetted or RDX,
wetted with not
less than 15
percent water by
mass.
Cymenes............. 3 UN2046 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Dangerous Goods in 9 UN3363 ....... .......... 136 None.......... 222........ None....... No limit No limit A .......
Machinery or
Dangerous Goods in
Apparatus.
Decaborane.......... 4.1 UN1868 II 4.1, 6.1.. A19, A20, IB6, None.......... 212........ None....... Forbidden 50 kg A 74
IP2, T3, TP33
Decahydronaphthalene 3 UN1147 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
n-Decane............ 3 UN2247 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Deflagrating metal 1.3C UN0132 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
salts of aromatic
nitroderivatives,
n.o.s..
Delay electric ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
igniter, see
Igniters.
D Denatured alcohol... 3 NA1987 II 3......... 172, T8 150........... 202........ 242........ 5 L 60 L B .......
........... .................. III 3......... 172, B1, T7 150........... 203........ 242........ 60 L 220 L A .......
Depth charges, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Charges, depth.
G Desensitized 3 UN3379 I 3......... 164 None.......... 201........ None....... Forbidden Forbidden D 36
explosive, liquid,
n.o.s..
G Desensitized 4.1 UN3380 I 4.1....... 164 None.......... 211........ None....... Forbidden Forbidden D 28, 36
explosive, solid,
n.o.s..
Detonating relays, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Detonators, etc.
Detonator 1.1B UN0360 II 1.1B...... ................ None.......... 62......... None....... Forbidden Forbidden 11 .......
assemblies, non-
electric for
blasting.
[[Page 177]]
Detonator 1.4B UN0361 II 1.4B...... 103 63(f), 63(g).. 62......... None....... Forbidden 75 kg 06 .......
assemblies, non-
electric, for
blasting.
Detonator, 1.4S UN0500 II 1.4S...... ................ 63(f), 63(g).. 62......... None....... 25 kg 100 kg 05 .......
assemblies, non-
electric for
blasting.
Detonators, 1.1B UN0030 II 1.1B...... ................ 63(f), 63(g).. 62......... None....... Forbidden Forbidden 11 .......
electric, for
blasting.
Detonators, 1.4B UN0255 II 1.4B...... 103 63(f), 63(g).. 62......... None....... Forbidden 75 kg 06 .......
electric, for
blasting.
Detonators, electric 1.4S UN0456 II 1.4S...... ................ 63(f), 63(g).. 62......... None....... 25 kg 100 kg 05 .......
for blasting.
Detonators for 1.1B UN0073 II 1.1B...... ................ None.......... 62......... None....... Forbidden Forbidden 11 .......
ammunition.
Detonators for 1.2B UN0364 II 1.2B...... ................ None.......... 62......... None....... Forbidden Forbidden 11 .......
ammunition.
Detonators for 1.4B UN0365 II 1.4B...... 103 None.......... 62......... None....... Forbidden 75 kg 06 .......
ammunition.
Detonators for 1.4S UN0366 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
ammunition.
Detonators, non- 1.1B UN0029 II 1.1B...... ................ None.......... 62......... None....... Forbidden Forbidden 11 .......
electric, for
blasting.
Detonators, non- 1.4B UN0267 II 1.4B...... 103 63(f), 63(g).. 62......... None....... Forbidden 75 kg 06 .......
electric, for
blasting.
Detonators, non- 1.4S UN0455 II 1.4S...... ................ 63(f), 63(g), 62......... None....... 25 kg 100 kg 05 .......
electric, for
blasting.
Deuterium, 2.1 UN1957 ....... 2.1....... ................ 306........... 302........ None....... Forbidden 150 kg E 40
compressed.
Devices, small, 2.1 UN3150 ....... 2.1....... ................ 306........... 304........ None....... 1 kg 15 kg B 40
hydrocarbon gas
powered or
Hydrocarbon gas
refills for small
devices with
release device.
Di-n-amylamine...... 3 UN2841 III 3, 6.1.... B1, IB3, T4, TP1 150........... 203........ 242........ 60 L 220 L A .......
Di-n-butyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxydicarbonate,
with more than 52
percent in solution.
Di-n-butylamine..... 8 UN2248 II 8, 3...... IB2, T7, TP2 None.......... 202........ 243........ 1 L 30 L A .......
2,2-Di-(tert- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
butylperoxy)
butane, with more
than 55 percent in
solution.
Di-(tert- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
butylperoxy)
phthalate, with
more than 55
percent in solution.
2,2-Di-(4,4-di-tert- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
butylperoxycyclohex
yl) propane, with
more than 42
percent with inert
solid.
Di-2,4- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dichlorobenzoyl
peroxide, with more
than 75 percent
with water.
1,2-Di- 3 UN2372 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
(dimethylamino)etha
ne.
Di-2-ethylhexyl ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
phosphoric acid,
see Diisooctyl acid
phosphate.
Di-(1- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydroxytetrazole)
(dry).
Di-(1-naphthoyl) Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxide.
a,a'-Di-(nitroxy) Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
methylether.
[[Page 178]]
Di-(beta- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitroxyethyl)
ammonium nitrate.
Diacetone alcohol... 3 UN1148 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Diacetone alcohol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxides, with
more than 57
percent in solution
with more than 9
percent hydrogen
peroxide, less than
26 percent
diacetone alcohol
and less than 9
percent water;
total active oxygen
content more than 9
percent by mass.
Diacetyl, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Butanedione.
Diacetyl peroxide, Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solid, or with more
than 25 percent in
solution.
Diagnostic specimen. 6.2 .................. ....... .......... A82 134........... 199........ None....... 4 L or 4 kg 4 L or 4 kg A 40
Diallylamine........ 3 UN2359 II 3, 6.1, 8. IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 21, 40,
100
Diallylether........ 3 UN2360 II 3, 6.1.... IB2, N12, T7, 150........... 202........ 243........ 1 L 60 L E 40
TP1, TP13
4,4'-Diaminodiphenyl 6.1 UN2651 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
methane. TP33
p-Diazidobenzene.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1,2-Diazidoethane... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1,1'- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Diazoaminonaphthale
ne.
Diazoaminotetrazole Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Diazodinitrophenol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Diazodinitrophenol, 1.1A UN0074 II 1.1A...... 111, 117 None.......... 62......... None....... Forbidden Forbidden 12 .......
wetted with not
less than 40
percent water or
mixture of alcohol
and water, by mass.
Diazodiphenylmethane Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Diazonium nitrates Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Diazonium Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
perchlorates (dry).
1,3-Diazopropane.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
[[Page 179]]
Dibenzyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxydicarbonate,
with more than 87
percent with water.
Dibenzyldichlorosila 8 UN2434 II 8......... B2, IB2, T7, 154........... 202........ 242........ 1 L 30 L C 40
ne. TP2, TP13
Diborane............ 2.3 UN1911 ....... 2.3, 2.1.. 1 None.......... 302........ None....... Forbidden Forbidden D 40, 57
D Diborane mixtures... 2.1 NA1911 ....... 2.1....... 5 None.......... 302........ 245........ Forbidden Forbidden D 40, 57
Dibromoacetylene.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1,2-Dibromobutan-3- 6.1 UN2648 II 6.1....... IB2 153........... 202........ 243........ 5 L 60 L B 40
one.
Dibromochloropropane 6.1 UN2872 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
.................... ........... .................. III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
A Dibromodifluorometha 9 UN1941 III None...... T11, TP2 155........... 203........ 241........ 100 L 220 L A 25
ne, R12B2.
1,2-Dibromoethane, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ethylene
dibromide.
Dibromomethane...... 6.1 UN2664 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Dibutyl ethers...... 3 UN1149 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Dibutylaminoethanol. 6.1 UN2873 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
N,N'- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dichlorazodicarbona
midine (salts of)
(dry).
1,1-Dichloro-1- 6.1 UN2650 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 12, 40,
nitroethane. 74
D 3,5-Dichloro-2,4,6- 6.1 NA9264 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A 40
trifluoropyridine. B74, T20, TP4,
TP12, TP13,
TP38, TP45
Dichloroacetic acid. 8 UN1764 II 8......... A3, A6, A7, B2, 154........... 202........ 242........ 1 L 30 L A .......
IB2, N34, T8,
TP2, TP12
1,3-Dichloroacetone. 6.1 UN2649 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 12, 40
T3, TP33
Dichloroacetyl 8 UN1765 II 8......... A3, A6, A7, B2, 154........... 202........ 242........ 1 L 30 L D 40
chloride. B6, IB2, N34,
T7, TP2
Dichloroacetylene... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
+ Dichloroanilines, 6.1 UN1590 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40
liquid.
Dichloroanilines, 6.1 UN3442 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
solid. T3, TP33
+ o-Dichlorobenzene... 6.1 UN1591 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
2,2'-Dichlorodiethyl 6.1 UN1916 II 6.1, 3.... IB2, N33, N34, 153........... 202........ 243........ 5 L 60 L A .......
ether. T7, TP2
Dichlorodifluorometh 2.2 UN2602 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
ane and
difluoroethane
azeotropic mixture
or Refrigerant gas
R 500 with
approximately 74
percent
dichlorodifluoromet
hane.
Dichlorodifluorometh 2.2 UN1028 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
ane or Refrigerant
gas R 12.
Dichlorodimethyl 6.1 UN2249 I 6.1, 3.... ................ None.......... 201........ 243........ Forbidden Forbidden ............ 40
ether, symmetrical.
[[Page 180]]
1,1-Dichloroethane.. 3 UN2362 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
1,2-Dichloroethane, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ethylene
dichloride.
Dichloroethyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
sulfide.
1,2-Dichloroethylene 3 UN1150 II 3......... IB2, T7, TP2 150........... 202........ 242........ 5 L 60 L B .......
Dichlorofluoromethan 2.2 UN1029 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
e or Refrigerant
gas R21.
Dichloroisocyanuric 5.1 UN2465 II 5.1....... 28, IB8, IP4, 152........... 212........ 240........ 5 kg 25 kg A 13
acid, dry or T3, TP33
Dichloroisocyanuric
acid salts.
Dichloroisopropyl 6.1 UN2490 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L B .......
ether.
Dichloromethane..... 6.1 UN1593 III 6.1....... IB3, IP8, N36, 153........... 203........ 241........ 60 L 220 L A .......
T7, TP2
Dichloropentanes.... 3 UN1152 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Dichlorophenyl 6.1 UN2250 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 25, 40,
isocyanates. T3, TP33 48
Dichlorophenyltrichl 8 UN1766 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
orosilane. N34, T7, TP2,
TP13
1,2-Dichloropropane. 3 UN1279 II 3......... IB2, N36, T4, 150........... 202........ 242........ 5 L 60 L B .......
TP1
1,3-Dichloropropanol- 6.1 UN2750 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 12, 40
2.
Dichloropropene and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
propylene
dichloride mixture,
see 1,2-
Dichloropropane.
Dichloropropenes.... 3 UN2047 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Dichlorosilane...... 2.3 UN2189 ....... 2.3, 2.1, 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 17, 40
8.
1,2-Dichloro-1,1,2,2- 2.2 UN1958 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
tetrafluoroethane
or Refrigerant gas
R 114.
Dichlorovinylchloroa Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
rsine.
Dicycloheptadiene, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Bicyclo [2,2,1]
hepta-2,5-diene,
stabilized.
Dicyclohexylamine... 8 UN2565 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Dicyclohexylammonium 4.1 UN2687 III 4.1....... IB8, IP3, T1, 151........... 213........ 240........ 25 kg 100 kg A 48
nitrite. TP33
[[Page 181]]
Dicyclopentadiene... 3 UN2048 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Didymium nitrate.... 5.1 UN1465 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
D Diesel fuel......... 3 NA1993 III None...... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T4, TP1, TP29
I Diesel fuel......... 3 UN1202 III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T2, TP1
Diethanol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrosamine
dinitrate (dry).
Diethoxymethane..... 3 UN2373 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
3,3-Diethoxypropene. 3 UN2374 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Diethyl carbonate... 3 UN2366 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Diethyl cellosolve, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ethylene glycol
diethyl ether.
Diethyl ether or 3 UN1155 I 3......... T11, TP2 150........... 201........ 243........ 1 L 30 L E 40
Ethyl ether.
Diethyl ketone...... 3 UN1156 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Diethyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxydicarbonate,
with more than 27
percent in solution.
Diethyl sulfate..... 6.1 UN1594 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L C .......
Diethyl sulfide..... 3 UN2375 II 3......... IB2, T7, TP1, None.......... 202........ 243........ 5 L 60 L E .......
TP13
Diethylamine........ 3 UN1154 II 3, 8...... A3, IB2, N34, 150........... 202........ 243........ 1 L 5 L E 40
T7, TP1
2- 8 UN2686 II 8, 3...... B2, IB2, T7, TP2 None.......... 202........ 243........ 1 L 30 L A .......
Diethylaminoethanol.
3-Diethyamino- 3 UN2684 III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A .......
propylamine..
+ N, N-Diethylaniline. 6.1 UN2432 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Diethylbenzene...... 3 UN2049 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Diethyldichlorosilan 8 UN1767 II 8, 3...... A7, B6, IB2, None.......... 202........ 243........ Forbidden 30 L C 40
e. N34, T7, TP2,
TP13
Diethylene glycol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitrate.
Diethyleneglycol 1.1D UN0075 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 13 21E
dinitrate,
desensitized with
not less than 25
percent non-
volatile water-
insoluble
phlegmatizer, by
mass.
Diethylenetriamine.. 8 UN2079 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A 40, 52
N,N- 8 UN2685 II 8, 3...... IB2, T7, TP2 None.......... 202........ 243........ 1 L 30 L A .......
Diethylethylenediam
ine.
Diethylgold bromide. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Diethylthiophosphory 8 UN2751 II 8......... B2, IB2, T7, TP2 None.......... 212........ 240........ 15 kg 50 kg D 12, 40
l chloride.
Diethylzinc......... 4.2 UN1366 I 4.2, 4.3.. 173, B11, T21, None.......... 181........ 244........ Forbidden Forbidden D 18
TP2, TP7
Difluorochloroethane ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
s, see 1-Chloro-1,1-
difluoroethanes.
1,1-Difluoroethane 2.1 UN1030 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
or Refrigerant gas
R 152a.
1,1-Difluoroethylene 2.1 UN1959 ....... 2.1....... ................ 306........... 304........ None....... Forbidden 150 kg E 40
or Refrigerant gas
R 1132a.
[[Page 182]]
Difluoromethane or 2.1 UN3252 ....... 2.1....... T50 306........... 302........ 314, 315... Forbidden 150 kg D 40
Refrigerant gas R
32.
Difluorophosphoric 8 UN1768 II 8......... A6, A7, B2, IB2, None.......... 202........ 242........ 1 L 30 L A 40
acid, anhydrous. N5, N34, T8,
TP2, TP12
2,3-Dihydropyran.... 3 UN2376 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
1,8-Dihydroxy- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
2,4,5,7-
tetranitroanthraqui
none (chrysamminic
acid).
Diiodoacetylene..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Diisobutyl ketone... 3 UN1157 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Diisobutylamine..... 3 UN2361 III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A .......
Diisobutylene, 3 UN2050 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
isomeric compounds.
Diisooctyl acid 8 UN1902 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
phosphate.
Diisopropyl ether... 3 UN1159 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E 40
Diisopropylamine.... 3 UN1158 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B .......
Diisopropylbenzene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydroperoxide, with
more than 72
percent in solution.
Diketene, stabilized 6.1 UN2521 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 26, 27,
B74, T20, TP2, 40
TP13, TP38, TP45
1,2-Dimethoxyethane. 3 UN2252 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
1,1-Dimethoxyethane. 3 UN2377 II 3......... IB2, T7, TP1 150........... 202........ 242........ 5 L 60 L B .......
Dimethyl carbonate.. 3 UN1161 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Dimethyl ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
chlorothiophosphate
, see Dimethyl
thiophosphoryl
chloride.
2,5-Dimethyl-2,5- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dihydroperoxy
hexane, with more
than 82 percent
with water.
Dimethyl disulfide.. 3 UN2381 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
Dimethyl ether...... 2.1 UN1033 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
Dimethyl-N- 3 UN2266 II 3, 8...... IB2, T7, TP2, 150........... 202........ 243........ 1 L 5 L B 40
propylamine. TP13
[[Page 183]]
Dimethyl sulfate.... 6.1 UN1595 I 6.1, 8.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, B77, T20,
TP2, TP13, TP38,
TP45
Dimethyl sulfide.... 3 UN1164 II 3......... IB2, IP8, T7, 150........... 202........ 242........ 5 L 60 L E 40
TP2
Dimethyl 6.1 UN2267 II 6.1, 8.... IB2, T7, TP2 153........... 202........ 243........ 1 L 30 L B 25
thiophosphoryl
chloride.
Dimethylamine, 2.1 UN1032 ....... 2.1....... T50 None.......... 304........ 314, 315... Forbidden 150 kg D 40
anhydrous.
Dimethylamine 3 UN1160 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B .......
solution.
2- 3 UN2378 II 3, 6.1.... IB2, T7, TP1 150........... 202........ 243........ 1 L 60 L A 40, 52
Dimethylaminoaceton
itrile.
2- 8 UN2051 II 8, 3...... B2, IB2, T7, TP2 154........... 202........ 243........ 1 L 30 L A .......
Dimethylaminoethano
l.
2-Dimethylaminoethyl 6.1 UN3302 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L D 25
acrylate.
2-Dimethylaminoethyl 6.1 UN2522 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L B 40
methacrylate.
N,N-Dimethylaniline. 6.1 UN2253 II 6.1....... IB1, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
2,3-Dimethylbutane.. 3 UN2457 II 3......... IB2, T7, TP1 150........... 202........ 242........ 5 L 60 L E .......
1,3- 3 UN2379 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B .......
Dimethylbutylamine.
Dimethylcarbamoyl 8 UN2262 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A 40
chloride.
Dimethylcyclohexanes 3 UN2263 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
N,N- 8 UN2264 II 8, 3...... B2, IB2, T7, TP2 154........... 202........ 243........ 1 L 30 L A 40
Dimethylcyclohexyla
mine.
Dimethyldichlorosila 3 UN1162 II 3, 8...... B77, IB2, T7, None.......... 202........ 243........ Forbidden Forbidden B 40
ne. TP2, TP13
Dimethyldiethoxysila 3 UN2380 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
ne.
Dimethyldioxanes.... 3 UN2707 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
N,N- 3 UN2265 III 3......... B1, IB3, T2, TP2 150........... 203........ 242........ 60 L 220 L A .......
Dimethylformamide.
Dimethylhexane Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dihydroperoxide
(dry).
Dimethylhydrazine, 6.1 UN2382 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40, 74
symmetrical. B74, B77, T20,
TP2, TP13, TP38,
TP45
Dimethylhydrazine, 6.1 UN1163 I 6.1, 3, 8. 2, B7, B9, B14, None.......... 227........ 244........ Forbidden Forbidden D 21, 38,
unsymmetrical. B32, B74, T20, 40, 100
TP2, TP13, TP38,
TP45
2,2-Dimethylpropane. 2.1 UN2044 ....... 2.1....... ................ 306........... 304........ 314, 315... Forbidden 150 kg E 40
Dimethylzinc........ 4.2 UN1370 I 4.2, 4.3.. 173, B11, B16, None.......... 181........ 244........ Forbidden Forbidden D 18
T21, TP2, TP7
Dinitro-o-cresol.... 6.1 UN1598 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
1,3-Dinitro-5,5- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dimethyl hydantoin.
Dinitro-7,8- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dimethylglycoluril
(dry).
1,3-Dinitro-4,5- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitrosobenzene.
1,4-Dinitro-1,1,4,4- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetramethylolbutane
tetranitrate (dry).
[[Page 184]]
2,4-Dinitro-1,3,5- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
trimethylbenzene.
Dinitroanilines..... 6.1 UN1596 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 91
T3, TP33
Dinitrobenzenes, 6.1 UN1597 II 6.1....... 11, IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 91
liquid.
.................... ........... .................. III 6.1....... 11, IB3, T7, TP2 153........... 203........ 241........ 60 L 220 L A 91
Dinitrobenzenes, 6.1 UN3443 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 91
solid. T3, TP33
Dinitrochlorobenzene ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
, see
Chlorodinitrobenzen
e.
1,2-Dinitroethane... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1,1-Dinitroethane Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Dinitrogen tetroxide 2.3 UN1067 ....... 2.3, 5.1, 1, B7, B14, B45, None.......... 336........ 314........ Forbidden Forbidden D 40, 89,
8. B46, B61, B66, 90
B67, B77, T50,
TP21
Dinitroglycoluril or 1.1D UN0489 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Dingu.
Dinitromethane...... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dinitrophenol, dry 1.1D UN0076 II 1.1D, 6.1. ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
or wetted with less
than 15 percent
water, by mass.
Dinitrophenol 6.1 UN1599 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 36
solutions.
.................... ........... .................. III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 36
Dinitrophenol, 4.1 UN1320 I 4.1, 6.1.. 23, A8, A19, None.......... 211........ None....... 1 kg 15 kg E 28, 36
wetted with not A20, N41
less than 15
percent water, by
mass.
Dinitrophenolates 1.3C UN0077 II 1.3C, 6.1. ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
alkali metals, dry
or wetted with less
than 15 percent
water, by mass.
Dinitrophenolates, 4.1 UN1321 I 4.1, 6.1.. 23, A8, A19, None.......... 211........ None....... 1 kg 15 kg E 28, 36
wetted with not A20, N41
less than 15
percent water, by
mass.
Dinitropropylene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
glycol.
Dinitroresorcinol, 1.1D UN0078 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
dry or wetted with
less than 15
percent water, by
mass.
2,4- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dinitroresorcinol
(heavy metal salts
of) (dry).
[[Page 185]]
4,6- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dinitroresorcinol
(heavy metal salts
of) (dry).
Dinitroresorcinol, 4.1 UN1322 I 4.1....... 23, A8, A19, None.......... 211........ None....... 1 kg 15 kg E 28, 36
wetted with not A20, N41
less than 15
percent water, by
mass.
3,5-Dinitrosalicylic Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid (lead salt)
(dry).
Dinitrosobenzene.... 1.3C UN0406 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Dinitrosobenzylamidi Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
ne and salts of
(dry).
2,2-Dinitrostilbene. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dinitrotoluenes, 6.1 UN2038 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
liquid.
Dinitrotoluenes, 6.1 UN1600 II 6.1....... T7, TP3 None.......... 202........ 243........ Forbidden Forbidden C .......
molten.
Dinitrotoluenes, 6.1 UN3454 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
solid. T3, TP33
1,9-Dinitroxy Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
pentamethylene-2,4,
6,8-tetramine (dry).
Dioxane............. 3 UN1165 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Dioxolane........... 3 UN1166 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
Dipentene........... 3 UN2052 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Diphenylamine 6.1 UN1698 I 6.1....... T6, TP33 None.......... 201........ None....... Forbidden Forbidden D 40
chloroarsine.
Diphenylchloroarsine 6.1 UN1699 I 6.1....... A8, B14, B32, None.......... 201........ 243........ Forbidden 30 L D 40
, liquid. N33, N34, T14,
TP2, TP13, TP27
Diphenylchloroarsine 6.1 UN3450 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg D 40
, solid. TP33
Diphenyldichlorosila 8 UN1769 II 8......... A7, B2, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
ne. N34, T7, TP2,
TP13
Diphenylmethyl 8 UN1770 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg D 40
bromide. T3, TP33
Dipicryl sulfide, 1.1D UN0401 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
dry or wetted with
less than 10
percent water, by
mass.
Dipicryl sulfide, 4.1 UN2852 I 4.1....... 162, A2, N41, None.......... 211........ None....... Forbidden 0.5 kg D 28
wetted with not N84
less than 10
percent water, by
mass.
Dipicrylamine, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanitrodiphenylam
ine.
Dipropionyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxide, with more
than 28 percent in
solution.
Di-n-propyl ether... 3 UN2384 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Dipropyl ketone..... 3 UN2710 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Dipropylamine....... 3 UN2383 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B .......
G Disinfectant, 8 UN1903 I 8......... A6, A7, B10, None.......... 201........ 243........ 0.5 L 2.5 L B .......
liquid, corrosive, T14, TP2, TP27
n.o.s..
G Disinfectants, 8 UN1903 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L B .......
liquid, corrosive
n.o.s..
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
[[Page 186]]
G Disinfectants, 6.1 UN3142 I 6.1....... A4, T14, TP2, None.......... 201........ 243........ 1 L 30 L A 40
liquid, toxic, TP27
n.o.s..
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L A 40
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A 40
TP28
G Disinfectants, 6.1 UN1601 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
solid, toxic, TP33
n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Disodium 8 UN3253 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
trioxosilicate. TP33
G Dispersant gases, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
n.o.s. see
Refrigerant gases,
n.o.s..
Divinyl ether, 3 UN1167 I 3......... A7, T11, TP2 None.......... 201........ 243........ 1 L 30 L E 40
stabilized.
Dodecyltrichlorosila 8 UN1771 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
ne. N34, T7, TP2,
TP13
Dry ice, see Carbon ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dioxide, solid.
G Dyes, liquid, 8 UN2801 I 8......... 11, A6, B10, None.......... 201........ 243........ 0.5 L 2.5 L A .......
corrosive, n.o.s. T14, TP2, TP27
or Dye
intermediates,
liquid, corrosive,
n.o.s..
.................... ........... .................. II 8......... 11, B2, IB2, 154........... 202........ 242........ 1 L 30 L A .......
T11, TP2, TP27
.................... ........... .................. III 8......... 11, IB3, T7, 154........... 203........ 241........ 5 L 60 L A .......
TP1, TP28
G Dyes, liquid, toxic, 6.1 UN1602 I 6.1....... ................ None.......... 201........ 243........ 1 L 30 L A .......
n.o.s. or Dye
intermediates,
liquid, toxic,
n.o.s..
.................... ........... .................. II 6.1....... IB2 153........... 202........ 243........ 5 L 60 L A .......
.................... ........... .................. III 6.1....... IB3 153........... 203........ 241........ 60 L 220 L A .......
G Dyes, solid, 8 UN3147 I 8......... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 25 kg A .......
corrosive, n.o.s. TP33
or Dye
intermediates,
solid, corrosive,
n.o.s..
.................... ........... .................. II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A .......
T3, TP33
[[Page 187]]
.................... ........... .................. III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
TP33
G Dyes, solid, toxic, 6.1 UN3143 I 6.1....... A5, IB7, IP1, None.......... 211........ 242........ 5 kg 50 kg A .......
n.o.s. or Dye T6, TP33
intermediates,
solid, toxic,
n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Dynamite, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Explosive,
blasting, type A.
Electrolyte (acid or ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
alkali) for
batteries, see
Battery fluid, acid
or Battery fluid,
alkali.
Elevated temperature 3 UN3256 III 3......... IB1, T3, TP3, None.......... None....... 247........ Forbidden Forbidden A .......
liquid, flammable, TP29
n.o.s., with flash
point above 37.8 C,
at or above its
flash point.
Elevated temperature 9 UN3257 III 9......... IB1, T3, TP3, None.......... None....... 247........ Forbidden Forbidden A 85
liquid, n.o.s., at TP29
or above 100 C and
below its flash
point (including
molten metals,
molten salts, etc.).
Elevated temperature 9 UN3258 III 9......... ................ 247(h) (4).... None....... 247........ Forbidden Forbidden A 85
solid, n.o.s., at
or above 240 C, see
Sec.
173.247(h)(4).
Engines, internal 9 UN3166 ....... 9......... 135 220........... 220........ 220........ Forbidden No limit A .......
combustion,
flammable gas
powered.
Engines, internal 9 UN3166 ....... 9......... 135 220........... 220........ 220........ No limit No limit A .......
combustion,
flammable liquid
powered.
G Environmentally 9 UN3082 III 9......... 8, 146, IB3, T4, 155........... 203........ 241........ No limit No limit A .......
hazardous TP1, TP29
substances, liquid,
n.o.s..
G Environmentally 9 UN3077 III 9......... 8, 146, B54, 155........... 213........ 240........ No limit No limit A .......
hazardous IB8, IP3, N20,
substances, solid, T1, TP33
n.o.s..
Epibromohydrin...... 6.1 UN2558 I 6.1, 3.... T14, TP2, TP13 None.......... 201........ 243........ Forbidden Forbidden D 40
+ Epichlorohydrin..... 6.1 UN2023 II 6.1, 3.... IB2, T7, TP2, 153........... 202........ 243........ 5 L 60 L A 40
TP13
1,2-Epoxy-3- 3 UN2752 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
ethoxypropane.
Esters, n.o.s....... 3 UN3272 II 3......... IB2, T7, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8, TP28
.................... ........... .................. III 3......... B1, IB3, T4, 150........... 203........ 242........ 60 L 220 L A .......
TP1, TP29
Etching acid,
liquid, n.o.s., see
Hydrofluoric acid,
etc.
Ethane.............. 2.1 UN1035 ....... 2.1....... ................ 306........... 304........ 302........ Forbidden 150 kg E 40
D Ethane-Propane 2.1 NA1961 ....... 2.1....... T75, TP5 None.......... 316........ 314, 315... Forbidden Forbidden D 40
mixture,
refrigerated liquid.
Ethane, refrigerated 2.1 UN1961 ....... 2.1....... T75, TP5 None.......... None....... 315........ Forbidden Forbidden D 40
liquid.
Ethanol amine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitrate.
[[Page 188]]
Ethanol or Ethyl 3 UN1170 II 3......... 24, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L A .......
alcohol or Ethanol
solutions or Ethyl
alcohol solutions.
.................... ........... .................. III 3......... 24, B1, IB3, T2, 150........... 203........ 242........ 60 L 220 L A .......
TP1
Ethanolamine or 8 UN2491 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Ethanolamine
solutions.
Ether, see Diethyl ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
ether.
Ethers, n.o.s....... 3 UN3271 II 3......... IB2, T7, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8, TP28
.................... ........... .................. III 3......... B1, IB3, T4, 150........... 203........ 242........ 60 L 220 L A .......
TP1, TP29
Ethyl acetate....... 3 UN1173 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Ethyl acrylate, 3 UN1917 II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L B 40
stabilized. TP13
Ethyl alcohol, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ethanol.
Ethyl aldehyde, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Acetaldehyde.
Ethyl amyl ketone... 3 UN2271 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
N- 6.1 UN3460 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
Ethylbenzyltoluidin TP33
es, solid.
N-Ethyl-N- 6.1 UN2274 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
benzylaniline.
Ethyl borate........ 3 UN1176 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Ethyl bromide....... 6.1 UN1891 II 6.1....... IB2, IP8, T7, 153........... 202........ 243........ 5 L 60 L B 40, 85
TP2, TP13
Ethyl bromoacetate.. 6.1 UN1603 II 6.1, 3.... IB2, T7, TP2 None.......... 202........ 243........ Forbidden Forbidden D 40
Ethyl butyl ether... 3 UN1179 II 3......... B1, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Ethyl butyrate...... 3 UN1180 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Ethyl chloride...... 2.1 UN1037 ....... 2.1....... B77, T50 None.......... 322........ 314, 315... Forbidden 150 kg B 40
Ethyl chloroacetate. 6.1 UN1181 II 6.1, 3.... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Ethyl chloroformate. 6.1 UN1182 I 6.1, 3, 8. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 21, 40,
B74, N34, T20, 100
TP2, TP13, TP38,
TP45
Ethyl 2- 3 UN2935 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
chloropropionate.
+ Ethyl 8 UN2826 II 8, 6.1, 3. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A 40
chlorothioformate. B74, T20, TP2,
TP38, TP45
[[Page 189]]
Ethyl crotonate..... 3 UN1862 II 3......... IB2, T4, TP2 150........... 202........ 242........ 5 L 60 L B .......
Ethyl ether, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Diethyl ether.
Ethyl fluoride or 2.1 UN2453 ....... 2.1....... ................ 306........... 304........ 314, 315... Forbidden 150 kg E 40
Refrigerant gas
R161.
Ethyl formate....... 3 UN1190 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
Ethyl hydroperoxide. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ethyl isobutyrate... 3 UN2385 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
+ Ethyl isocyanate.... 3 UN2481 I 3, 6.1.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40, 52
B72, T22, TP2,
TP13, TP38, TP44
Ethyl lactate....... 3 UN1192 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Ethyl mercaptan..... 3 UN2363 I 3......... A6, T11, TP2, None.......... 201........ 243........ Forbidden 30 L E 95, 102
TP13
Ethyl methacrylate, 3 UN2277 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
stabilized.
Ethyl methyl ether.. 2.1 UN1039 ....... 2.1....... ................ None.......... 201........ 314, 315... Forbidden 150 kg B 40
Ethyl methyl ketone 3 UN1193 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
or Methyl ethyl
ketone.
Ethyl nitrite 3 UN1194 I 3, 6.1.... ................ None.......... 201........ None....... Forbidden Forbidden E 40, 105
solutions.
Ethyl orthoformate.. 3 UN2524 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Ethyl oxalate....... 6.1 UN2525 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Ethyl perchlorate... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
D Ethyl 6.1 NA2927 I 6.1, 8.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
phosphonothioic B74, T20, TP4,
dichloride, TP12, TP13,
anhydrous. TP38, TP45
D Ethyl phosphonous 6.1 NA2845 I 6.1, 4.2.. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 18
dichloride, B74, T20, TP4,
anhydrous TP12, TP13,
pyrophoric liquid. TP38, TP45
D Ethyl 6.1 NA2927 I 6.1, 8.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
phosphorodichlorida B74, T20, TP4,
te. TP12, TP13,
TP38, TP45
Ethyl propionate.... 3 UN1195 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Ethyl propyl ether.. 3 UN2615 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
Ethyl silicate, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Tetraethyl silicate.
Ethylacetylene, 2.1 UN2452 ....... 2.1....... ................ None.......... 304........ 314, 315... Forbidden 150 kg B 40
stabilized.
Ethylamine.......... 2.1 UN1036 ....... 2.1....... B77, T50 None.......... 321........ 314, 315... Forbidden 150 kg D 40
Ethylamine, aqueous 3 UN2270 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40
solution with not
less than 50
percent but not
more than 70
percent ethylamine.
N-Ethylaniline...... 6.1 UN2272 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 52, 74
2-Ethylaniline...... 6.1 UN2273 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 52, 74
Ethylbenzene........ 3 UN1175 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
[[Page 190]]
N- 6.1 UN2753 III 6.1....... IB3, T7, TP1 153........... 203........ 241........ 60 L 220 L A .......
Ethylbenzyltoluidin
es liquid.
2-Ethylbutanol...... 3 UN2275 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
2-Ethylbutyl acetate 3 UN1177 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
2-Ethylbutyraldehyde 3 UN1178 II 3......... B1, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Ethyldichloroarsine. 6.1 UN1892 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, T20, TP2,
TP13, TP38, TP45
Ethyldichlorosilane. 4.3 UN1183 I 4.3, 8, 3. A2, A3, A7, N34, None.......... 201........ 244........ Forbidden 1 L D 21, 28,
T10, TP2, TP7, 40, 49,
TP13 100
Ethylene, acetylene 2.1 UN3138 ....... 2.1....... T75, TP5 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 57
and propylene in
mixture,
refrigerated liquid
with at least 71.5
percent ethylene
with not more than
22.5 percent
acetylene and not
more than 6 percent
propylene.
Ethylene 6.1 UN1135 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
chlorohydrin. B74, T20, TP2,
TP13, TP38, TP45
Ethylene............ 2.1 UN1962 ....... 2.1....... ................ 306........... 304........ 302........ Forbidden 150 kg E 40
Ethylene diamine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diperchlorate.
Ethylene dibromide.. 6.1 UN1605 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, B77, T20,
TP2, TP13, TP38,
TP45
Ethylene dibromide ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
and methyl bromide
liquid mixtures,
see Methyl bromide
and ethylene
dibromide, liquid
mixtures.
Ethylene dichloride. 3 UN1184 II 3, 6.1.... IB2, N36, T7, 150........... 202........ 243........ 1 L 60 L B 40
TP1
Ethylene glycol 3 UN1153 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L A .......
diethyl ether.
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Ethylene glycol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitrate.
Ethylene glycol 3 UN1171 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
monoethyl ether.
[[Page 191]]
Ethylene glycol 3 UN1172 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
monoethyl ether
acetate.
Ethylene glycol 3 UN1188 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
monomethyl ether.
Ethylene glycol 3 UN1189 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
monomethyl ether
acetate.
Ethylene oxide and 2.3 UN3300 ....... 2.3, 2.1.. 4 None.......... 304........ 314, 315... Forbidden Forbidden D 40
carbon dioxide
mixture with more
than 87 percent
ethylene oxide.
Ethylene oxide and 2.1 UN1041 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 25 kg B 40
carbon dioxide
mixtures with more
than 9 percent but
not more than 87
percent ethylene
oxide.
Ethylene oxide and 2.2 UN1952 ....... 2.2....... ................ 306........... 304........ 314, 315... 75 kg 150 kg A .......
carbon dioxide
mixtures with not
more than 9 percent
ethylene oxide.
Ethylene oxide and 2.2 UN3297 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
chlorotetrafluoroet
hane mixture with
not more than 8.8
percent ethylene
oxide.
Ethylene oxide and 2.2 UN3070 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
dichlorodifluoromet
hane mixture, with
not more than 12.5
percent ethylene
oxide.
Ethylene oxide and 2.2 UN3298 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
pentafluoroethane
mixture with not
more than 7.9
percent ethylene
oxide.
Ethylene oxide and 3 UN2983 I 3, 6.1.... 5, A11, N4, N34, None.......... 201........ 243........ Forbidden 30 L E 40
propylene oxide T14, TP2, TP7,
mixtures, with not TP13
more than 30
percent ethylene
oxide.
Ethylene oxide and 2.2 UN3299 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
tetrafluoroethane
mixture with not
more than 5.6
percent ethylene
oxide.
Ethylene oxide or 2.3 UN1040 ....... 2.3, 2.1.. 4, T50, TP20 None.......... 323........ 323........ Forbidden Forbidden D 40
Ethylene oxide with
nitrogen up to a
total pressure of
1MPa (10 bar) at 50
degrees C.
Ethylene, 2.1 UN1038 ....... 2.1....... T75, TP5 None.......... 316........ 318, 319... Forbidden Forbidden D 40
refrigerated liquid
(cryogenic liquid).
Ethylenediamine..... 8 UN1604 II 8, 3...... IB2, T7, TP2 154........... 202........ 243........ 1 L 30 L A 40
Ethyleneimine, 6.1 UN1185 I 6.1, 3.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
stabilized. B72, B77, N25,
N32, T22, TP2,
TP13, TP38, TP44
Ethylhexaldehyde, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Octyl aldehydes
etc.
[[Page 192]]
2-Ethylhexyl 6.1 UN2748 II 6.1, 8.... IB2, T7, TP2, 153........... 202........ 243........ 1 L 30 L A 12, 13,
chloroformate. TP13 21, 25,
40, 100
2-Ethylhexylamine... 3 UN2276 III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A 40
Ethylphenyldichloros 8 UN2435 II 8......... A7, B2, IB2, None.......... 202........ 242........ Forbidden 30 L C .......
ilane. N34, T7, TP2,
TP13
1-Ethylpiperidine... 3 UN2386 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B .......
N-Ethyltoluidines... 6.1 UN2754 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Ethyltrichlorosilane 3 UN1196 II 3, 8...... A7, IB1, N34, 150........... 202........ 243........ 1 L 5 L B 40
T7, TP2, TP13
Etiologic agent, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Infectious
substances, etc.
Explosive articles, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Articles,
explosive , n.o.s.
etc.
Explosive, blasting, 1.1D UN0081 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 19E,
type A. 21E
Explosive, blasting, 1.1D UN0082 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 19E
type B.
Explosive, blasting, 1.5D UN0331 II 1.5D...... 105,106 None.......... 62......... None....... Forbidden Forbidden 10 19E
type B or Agent
blasting, Type B.
Explosive, blasting, 1.1D UN0083 II 1.1D...... 123 None.......... 62......... None....... Forbidden Forbidden 10 22E
type C.
Explosive, blasting, 1.1D UN0084 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
type D.
Explosive, blasting, 1.1D UN0241 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 19E
type E.
Explosive, blasting, 1.5D UN0332 II 1.5D...... 105, 106 None.......... 62......... None....... Forbidden Forbidden 10 19E
type E or Agent
blasting, Type E.
Explosive, Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
forbidden. See Sec.
173.54.
Explosive ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
substances, see
Substances,
explosive, n.o.s.
etc.
Explosives, slurry, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Explosive,
blasting, type E.
Explosives, water ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
gels, see
Explosive,
blasting, type E.
Extracts, aromatic, 3 UN1169 II 3......... 149, IB2, T4, 150........... 202........ 242........ 5 L 60 L B .......
liquid. TP1, TP8
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Extracts, flavoring, 3 UN1197 II 3......... 149, IB2, T4, 150........... 202........ 242........ 5 L 60 L B .......
liquid. TP1, TP8
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
[[Page 193]]
Fabric with animal ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
or vegetable oil,
see Fibers or
fabrics, etc.
Ferric arsenate..... 6.1 UN1606 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Ferric arsenite..... 6.1 UN1607 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Ferric chloride, 8 UN1773 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
anhydrous. TP33
Ferric chloride, 8 UN2582 III 8......... B15, IB3, T4, 154........... 203........ 241........ 5 L 60 L A .......
solution. TP1
Ferric nitrate...... 5.1 UN1466 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
IP3, T1, TP33
Ferrocerium......... 4.1 UN1323 II 4.1....... 59, A19, IB8, 151........... 212........ 240........ 15 kg 50 kg A .......
IP2, IP4, T3,
TP33
Ferrosilicon with 30 4.3 UN1408 III 4.3, 6.1.. A1, A19, B6, 151........... 213........ 240........ 25 kg 100 kg A 13, 40,
percent or more but IB8, IP4, IP7, 52, 53,
less than 90 T1, TP33 85, 103
percent silicon.
Ferrous arsenate.... 6.1 UN1608 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
D Ferrous chloride, 8 NA1759 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A .......
solid. T3, TP33
D Ferrous chloride, 8 NA1760 II 8......... B3, IB2, T11, 154........... 202........ 242........ 1 L 30 L B 40
solution. TP2, TP27
Ferrous metal 4.2 UN2793 III 4.2....... A1, A19, IB8, None.......... 213........ 241........ 25 kg 100 kg A .......
borings or Ferrous IP3, IP7
metal shavings or
Ferrous metal
turnings or Ferrous
metal cuttings in a
form liable to self-
heating.
Fertilizer 2.2 UN1043 ....... 2.2....... ................ 306........... 304........ 314, 315... Forbidden 150 kg E 40
ammoniating
solution with free
ammonia.
A I W Fibers, animal or 4.2 UN1372 III 4.2....... ................ 151........... 213........ 240........ Forbidden Forbidden A .......
Fibers, vegetable
burnt, wet or damp.
IW Fibers, vegetable, 4.1 UN3360 III 4.1....... 137 151........... 213........ 240........ No Limit No Limit A .......
dry.
A W Fibers or Fabrics, 4.2 UN1373 III 4.2....... 137, IB8, IP3, None.......... 213........ 241........ Forbidden Forbidden A .......
animal or vegetable T1, TP33
or Synthetic,
n.o.s. with animal
or vegetable oil.
Fibers or Fabrics 4.1 UN1353 III 4.1....... A1, IB8, IP3 None.......... 213........ 240........ 25 kg 100 kg D .......
impregnated with
weakly nitrated
nitrocellulose,
n.o.s..
Films, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrocellulose
base, from which
gelatine has been
removed; film
scrap, see
Celluloid scrap.
Films, 4.1 UN1324 III 4.1....... ................ None.......... 183........ None....... 25 kg 100 kg D 28
nitrocellulose
base, gelatine
coated (except
scrap).
Fire extinguisher 8 UN1774 II 8......... N41 154........... 202........ None....... 1 L 30 L A .......
charges, corrosive
liquid.
[[Page 194]]
Fire extinguisher ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
charges, expelling,
explosive, see
Cartridges, power
device.
Fire extinguishers 2.2 UN1044 ....... 2.2....... 18, 110 309........... 309........ None....... 75 kg 150 kg A .......
containing
compressed or
liquefied gas.
Firelighters, solid 4.1 UN2623 III 4.1....... A1, A19 None.......... 213........ None....... 25 kg 100 kg A 52
with flammable
liquid.
Fireworks........... 1.1G UN0333 II 1.1G...... 108 None.......... 62......... None....... Forbidden Forbidden 07 .......
Fireworks........... 1.2G UN0334 II 1.2G...... 108 None.......... 62......... None....... Forbidden Forbidden 07 .......
Fireworks........... 1.3G UN0335 II 1.3G...... 108 None.......... 62......... None....... Forbidden Forbidden 07 .......
Fireworks........... 1.4G UN0336 II 1.4G...... 108 None.......... 62......... None....... Forbidden 75 kg 06 .......
Fireworks........... 1.4S UN0337 II 1.4S...... 108 None.......... 62......... None....... 25 kg 100 kg 05 .......
First aid kits...... 9 UN3316 ....... 9......... 15 161........... 161........ None....... 10 kg 10 kg A .......
W Fish meal, 9 UN2216 III None...... 155, IB8, IP3, 155........... 218........ 218........ No limit No limit B 88,
stabilized or Fish T1, TP33 122,
scrap, stabilized. 128
Fish meal, 4.2 UN1374 II 4.2....... 155, A1, A19, None.......... 212........ 241........ 15 kg 50 kg B 18, 128
unstablized or Fish IB8, IP2, IP4,
scrap, unstabilized. T3, TP33
Flammable compressed ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
gas, see Compressed
or Liquefied gas,
flammable, etc.
Flammable compressed ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
gas (small
receptacles not
fitted with a
dispersion device,
not refillable),
see Receptacles,
etc.
Flammable gas in ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
lighters, see
Lighters or lighter
refills,
cigarettes,
containing
flammable gas.
G Flammable liquid, 3 UN3286 I 3, 6.1, 8. T14, TP2, TP13, None.......... 201........ 243........ Forbidden 2.5 L E 21, 40,
toxic, corrosive, TP27 100
n.o.s..
.................... ........... .................. II 3, 6.1, 8. IB2, T11, TP2, 150........... 202........ 243........ 1 L 5 L B 21, 40,
TP13, TP27 100
G Flammable liquids, 3 UN2924 I 3, 8...... T14, TP2 None.......... 201........ 243........ 0.5 L 2.5 L E 40
corrosive, n.o.s..
.................... ........... .................. II 3, 8...... IB2, T11, TP2, 150........... 202........ 243........ 1 L 5 L B 40
TP27
[[Page 195]]
.................... ........... .................. III 3, 8...... B1, IB3, T7, 150........... 203........ 242........ 5 L 60 L A 40
TP1, TP28
G Flammable liquids, 3 UN1993 I 3......... T11, TP1, TP27 150........... 201........ 243........ 1 L 30 L E .......
n.o.s..
.................... ........... .................. II 3......... IB2, T7, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8, TP28
.................... ........... .................. III 3......... B1, B52, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T4, TP1, TP29
G Flammable liquids, 3 UN1992 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L E 40
toxic, n.o.s.. TP27
.................... ........... .................. II 3, 6.1.... IB2, T7, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13
.................... ........... .................. III 3, 6.1.... B1, IB3, T7, 150........... 203........ 242........ 60 L 220 L A .......
TP1, TP28
G Flammable solid, 4.1 UN3180 II 4.1, 8.... A1, IB6, IP2, 151........... 212........ 242........ 15 kg 50 kg D 40
corrosive, T3, TP33
inorganic, n.o.s..
.................... ........... .................. III 4.1, 8.... A1, IB6, T1, 151........... 213........ 242........ 25 kg 100 kg D 40
TP33
G Flammable solid, 4.1 UN3178 II 4.1....... A1, IB8, IP2, 151........... 212........ 240........ 15 kg 50 kg B .......
inorganic, n.o.s.. IP4, T3, TP33
.................... ........... .................. III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg B .......
T1, TP33
G Flammable solid, 4.1 UN3176 II 4.1....... IB1, T3, TP3, 151........... 212........ 240........ Forbidden Forbidden C .......
organic, molten, TP26
n.o.s..
.................... ........... .................. III 4.1....... IB1, T1, TP3, 151........... 213........ 240........ Forbidden Forbidden C .......
TP26
G Flammable solid, 4.1 UN3097 II 4.1, 5.1.. 131 None.......... 214........ 214........ Forbidden Forbidden E 40
oxidizing, n.o.s..
.................... ........... .................. III 4.1, 5.1.. 131, T1, TP33 None.......... 214........ 214........ Forbidden Forbidden D 40
G Flammable solid, 4.1 UN3179 II 4.1, 6.1.. A1, IB6, IP2, 151........... 212........ 242........ 15 kg 50 kg B 40
toxic, inorganic, T3, TP33
n.o.s..
.................... ........... .................. III 4.1, 6.1.. A1, IB6, T1, 151........... 213........ 242........ 25 kg 100 kg B 40
TP33
G Flammable solids, 4.1 UN2925 II 4.1, 8.... A1, IB6, IP2, None.......... 212........ 242........ 15 kg 50 kg D 40
corrosive, organic, T3, TP33
n.o.s..
.................... ........... .................. III 4.1, 8.... A1, IB6, T1, 151........... 213........ 242........ 25 kg 100 kg D 40
TP33
G Flammable solids, 4.1 UN1325 II 4.1....... A1, IB8, IP2, 151........... 212........ 240........ 15 kg 50 kg B .......
organic, n.o.s.. IP4, T3, TP33
.................... ........... .................. III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg B .......
T1, TP33
G Flammable solids, 4.1 UN2926 II 4.1, 6.1.. A1, IB6, IP2, 151........... 212........ 242........ 15 kg 50 kg B 40
toxic, organic, T3, TP33
n.o.s..
.................... ........... .................. III 4.1, 6.1.. A1, IB6, T1, 151........... 213........ 242........ 25 kg 100 kg B 40
TP33
Flares, aerial...... 1.3G UN0093 II 1.3G...... ................ None.......... 62......... None....... Forbidden 75 kg 07 .......
Flares, aerial...... 1.4G UN0403 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Flares, aerial...... 1.4S UN0404 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
Flares, aerial...... 1.1G UN0420 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Flares, aerial...... 1.2G UN0421 II 1.2G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
[[Page 196]]
Flares, airplane, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Flares, aerial.
Flares, signal, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Cartridges, signal.
Flares, surface..... 1.3G UN0092 II 1.3G...... ................ None.......... 62......... None....... Forbidden 75 kg 07 .......
Flares, surface..... 1.1G UN0418 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Flares, surface..... 1.2G UN0419 II 1.2G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Flares, water- ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
activated, see
Contrivances, water-
activated, etc.
Flash powder........ 1.1G UN0094 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 15 .......
Flash powder........ 1.3G UN0305 II 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 15 .......
Flue dusts, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
poisonous, see
Arsenical dust.
Fluoric acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hydrofluoric acid,
etc.
Fluorine, compressed 2.3 UN1045 ....... 2.3, 5.1, 1 None.......... 302........ None....... Forbidden Forbidden D 40, 89,
8. 90
Fluoroacetic acid... 6.1 UN2642 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 1 kg 15 kg E .......
TP33
Fluoroanilines...... 6.1 UN2941 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Fluorobenzene....... 3 UN2387 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Fluoroboric acid.... 8 UN1775 II 8......... A6, A7, B2, B15, 154........... 202........ 242........ 1 L 30 L A .......
IB2, N3, N34,
T7, TP2
Fluorophosphoric 8 UN1776 II 8......... A6, A7, B2, IB2, None.......... 202........ 242........ 1 L 30 L A .......
acid anhydrous. N3, N34, T8,
TP2, TP12
Fluorosilicates, 6.1 UN2856 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
n.o.s.. TP33
Fluorosilicic acid.. 8 UN1778 II 8......... A6, A7, B2, B15, None.......... 202........ 242........ 1 L 30 L A .......
IB2, N3, N34,
T8, TP2, TP12
Fluorosulfonic acid. 8 UN1777 I 8......... A3, A6, A7, A10, None.......... 201........ 243........ 0.5 L 2.5 L D 40
B6, B10, N3,
N36, T10, TP2,
TP12
Fluorotoluenes...... 3 UN2388 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
[[Page 197]]
Forbidden materials. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
See Sec. 173.21.
Formaldehyde, 3 UN1198 III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A 40
solutions,
flammable.
Formaldehyde, 8 UN2209 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
solutions, with not
less than 25
percent
formaldehyde.
Formalin, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Formaldehyde,
solutions.
Formic acid......... 8 UN1779 II 8......... B2, B28, IB2, 154........... 202........ 242........ 1 L 30 L A 40
T7, TP2
Fracturing devices, 1.1D UN0099 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
explosive, without
detonators for oil
wells.
Fuel, aviation, 3 UN1863 I 3......... 144, T11, TP1, 150........... 201........ 243........ 1 L 30 L E .......
turbine engine. TP8, TP28
.................... ........... .................. II 3......... 144, IB2, T4, 150........... 202........ 242........ 5 L 60 L B .......
TP1, TP8
.................... ........... .................. III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T2, TP1
D Fuel oil (No. 1, 2, 3 NA1993 III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
4, 5, or 6). T4, TP1, TP29
Fuel system ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
components
(including fuel
control units
(FCU), carburetors,
fuel lines, fuel
pumps) see
Dangerous Goods in
Apparatus or
Dangerous Goods in
Machinery.
Fulminate of mercury Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Fulminate of ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mercury, wet, see
Mercury fulminate,
etc.
Fulminating gold.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Fulminating mercury. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Fulminating platinum Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Fulminating silver.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Fulminic acid....... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Fumaryl chloride.... 8 UN1780 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L C 8, 40
Fumigated lading, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sec. Sec.
172.302(g), 173.9
and 176.76(h).
Fumigated transport ........... .......... .............. ........... ........... ........... ........... .......
vehicle or freight
container see Sec.
173.9.
Furaldehydes........ 6.1 UN1199 II 6.1, 3.... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Furan............... 3 UN2389 I 3......... T12, TP2, TP13 None.......... 201........ 243........ 1 L 30 L E 40
Furfuryl alcohol.... 6.1 UN2874 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 52, 74
Furfurylamine....... 3 UN2526 III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A 40
Fuse, detonating, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
metal clad, see
Cord, detonating,
metal clad.
[[Page 198]]
Fuse, detonating, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mild effect, metal
clad, see Cord,
detonating, mild
effect, metal clad.
Fuse, igniter 1.4G UN0103 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
tubular metal clad.
Fuse, non-detonating 1.3G UN0101 II 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
instantaneous or
quickmatch.
Fuse, safety........ 1.4S UN0105 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
D Fusee (railway or 4.1 NA1325 II 4.1....... ................ None.......... 184........ None....... 15 kg 50 kg B .......
highway).
Fusel oil........... 3 UN1201 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Fuses, tracer, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Tracers for
ammunition.
Fuzes, combination, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
percussion and
time, see Fuzes,
detonating (UN0257,
UN0367); Fuzes,
igniting (UN0317,
UN0368).
Fuzes, detonating... 1.1B UN0106 II 1.1B...... ................ None.......... 62......... None....... Forbidden Forbidden 11 .......
Fuzes, detonating... 1.2B UN0107 II 1.2B...... ................ None.......... 62......... None....... Forbidden Forbidden 11 .......
Fuzes, detonating... 1.4B UN0257 II 1.4B...... 116 None.......... 62......... None....... Forbidden 75 kg 06 .......
Fuzes, detonating... 1.4S UN0367 II 1.4S...... 116 None.......... 62......... None....... 25 kg 100 kg 05 .......
Fuzes, detonating, 1.1D UN0408 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
with protective
features.
Fuzes, detonating, 1.2D UN0409 II 1.2D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
with protective
features.
Fuzes, detonating, 1.4D UN0410 II 1.4D...... 116 None.......... 62......... None....... Forbidden 75 kg 06 .......
with protective
features.
Fuzes, igniting..... 1.3G UN0316 II 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Fuzes, igniting..... 1.4G UN0317 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Fuzes, igniting..... 1.4S UN0368 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
Galactsan trinitrate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Gallium............. 8 UN2803 III 8......... T1, TP33 None.......... 162........ 240........ 20 kg 20 kg B 48
Gas cartridges, 2.1 UN2037 ....... 2.1....... ................ 306........... 304........ None....... 1 kg 15 kg B 40
(flammable) without
a release device,
non-refillable.
Gas generator 2.2 .................. ....... 2.2....... ................ None.......... 335........ None....... 75 kg 150 kg A .......
assemblies
(aircraft),
containing a non-
flammable non-toxic
gas and a
propellant
cartridge.
[[Page 199]]
D Gas identification 2.3 NA9035 ....... 2.3....... 6 None.......... 194........ None....... Forbidden Forbidden D .......
set.
Gas oil............. 3 UN1202 III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T2, TP1
G Gas, refrigerated 2.1 UN3312 ....... 2.1....... T75, TP5 None.......... 316........ 318........ Forbidden Forbidden D 40
liquid, flammable,
n.o.s. (cryogenic
liquid).
G Gas, refrigerated 2.2 UN3158 ....... 2.2....... T75, TP5 320........... 316........ 318........ 50 kg 500 kg D .......
liquid, n.o.s.
(cryogenic liquid).
G Gas, refrigerated 2.2 UN3311 ....... 2.2, 5.1.. T75, TP5, TP22 320........... 316........ 318........ Forbidden Forbidden D .......
liquid, oxidizing,
n.o.s. (cryogenic
liquid).
Gas sample, non- 2.1 UN3167 ....... 2.1....... ................ 306........... 302, 304... None....... 1 L 5 L D .......
pressurized,
flammable, n.o.s.,
not refrigerated
liquid.
Gas sample, non- 2.3 UN3168 ....... 2.3, 2.1.. 6 306........... 302........ None....... Forbidden 1 L D .......
pressurized, toxic,
flammable, n.o.s.,
not refrigerated
liquid.
Gas sample, non- 2.3 UN3169 ....... 2.3....... 6 306........... 302, 304... None....... Forbidden 1 L D .......
pressurized, toxic,
n.o.s., not
refrigerated liquid.
D Gasohol gasoline 3 NA1203 II 3......... 144 150........... 202........ 242........ 5 L 60 L E .......
mixed with ethyl
alcohol, with not
more than 20
percent alcohol.
Gasoline............ 3 UN1203 II 3......... 144, B1, B33, T8 150........... 202........ 242........ 5 L 60 L E .......
Gasoline, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
casinghead, see
Gasoline.
Gelatine, blasting, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Explosive,
blasting, type A.
Gelatine dynamites, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Explosive,
blasting, type A.
Germane............. 2.3 UN2192 ....... 2.3, 2.1.. 2 None.......... 302........ 245........ Forbidden Forbidden D 40
Glycerol-1,3- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitrate.
Glycerol gluconate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
trinitrate.
Glycerol lactate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
trinitrate.
Glycerol alpha- 6.1 UN2689 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
monochlorohydrin.
Glyceryl trinitrate, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Nitroglycerin,
etc.
Glycidaldehyde...... 3 UN2622 II 3, 6.1.... IB2, IP8, T7, 150........... 202........ 243........ 1 L 60 L A 40
TP1
Grenades, hand or 1.1D UN0284 II 1.1D...... ................ .............. 62......... None....... Forbidden Forbidden 07 .......
rifle, with
bursting charge.
Grenades, hand or 1.2D UN0285 II 1.2D...... ................ .............. 62......... None....... Forbidden Forbidden 07 .......
rifle, with
bursting charge.
Grenades, hand or 1.1F UN0292 II 1.1F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
rifle, with
bursting charge.
Grenades, hand or 1.2F UN0293 II 1.2F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
rifle, with
bursting charge.
Grenades, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
illuminating, see
Ammunition,
illuminating, etc.
Grenades, practice, 1.4S UN0110 II 1.4S...... ................ .............. 62......... None....... 25 kg 100 kg 05 .......
hand or rifle.
Grenades, practice, 1.3G UN0318 II 1.3G...... ................ .............. 62......... None....... Forbidden Forbidden 07 .......
hand or rifle.
Grenades, practice, 1.2G UN0372 II 1.2G...... ................ .............. 62......... None....... Forbidden Forbidden 07 .......
hand or rifle.
[[Page 200]]
Grenades practice 1.4G UN0452 II 1.4G...... ................ .............. 62......... None....... Forbidden 75 kg 06 .......
Hand or rifle.
Grenades, smoke, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ammunition, smoke,
etc.
Guanidine nitrate... 5.1 UN1467 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A 73
T1, TP33
Guanyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrosaminoguanylid
ene hydrazine (dry).
Guanyl 1.1A UN0113 II 1.1A...... 111, 117 None.......... 62......... None....... Forbidden Forbidden 12 .......
nitrosaminoguanylid
ene hydrazine,
wetted with not
less than 30
percent water, by
mass.
Guanyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrosaminoguanylte
trazene (dry).
Guanyl 1.1A UN0114 II 1.1A...... 111, 117 None.......... 62......... None....... Forbidden Forbidden 12 .......
nitrosaminoguanylte
trazene, wetted or
Tetrazene, wetted
with not less than
30 percent water or
mixture of alcohol
and water, by mass.
Gunpowder, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
compressed or
Gunpowder in
pellets, see Black
powder (UN 0028).
Gunpowder, granular ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
or as a meal, see
Black powder (UN
0027).
Hafnium powder, dry. 4.2 UN2545 I 4.2....... ................ None.......... 211........ 242........ Forbidden Forbidden D .......
.................... ........... .................. II 4.2....... A19, A20, IB6, None.......... 212........ 241........ 15 kg 50 kg D .......
IP2, N34, T3,
TP33
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg D .......
TP33
[[Page 201]]
Hafnium powder, 4.1 UN1326 II 4.1....... A6, A19, A20, None.......... 212........ 241........ 15 kg 50 kg E 74
wetted with not IB6, IP2, N34,
less than 25 T3, TP33
percent water (a
visible excess of
water must be
present) (a)
mechanically
produced, particle
size less than 53
microns; (b)
chemically
produced, particle
size less than 840
microns.
Hand signal device, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Signal devices,
hand.
Hazardous ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
substances, liquid
or solid, n.o.s.,
see Environmentally
hazardous
substances, etc.
D G Hazardous waste, 9 NA3082 III 9......... IB3, T2, TP1 155........... 203........ 241........ No limit No limit A .......
liquid, n.o.s..
D G Hazardous waste, 9 NA3077 III 9......... B54, IB8, IP2, 155........... 213........ 240........ No limit No limit A .......
solid, n.o.s.. T1, TP33
Heating oil, light.. 3 UN1202 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Helium, compressed.. 2.2 UN1046 ....... 2.2....... ................ 306........... 302........ 302, 314... 75 kg 150 kg A 85
Helium-oxygen ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixture, see Rare
gases and oxygen
mixtures.
Helium, refrigerated 2.2 UN1963 ....... 2.2....... T75, TP5 320........... 316........ 318........ 50 kg 500 kg B .......
liquid (cryogenic
liquid).
Heptafluoropropane 2.2 UN3296 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
or Refrigerant gas
R 227.
n-Heptaldehyde...... 3 UN3056 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Heptanes............ 3 UN1206 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
n-Heptene........... 3 UN2278 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Hexachloroacetone... 6.1 UN2661 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L B 12, 40
Hexachlorobenzene... 6.1 UN2729 III 6.1....... B3, IB8, IP3, 153........... 203........ 241........ 60 L 220 L A .......
T1, TP33
Hexachlorobutadiene. 6.1 UN2279 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Hexachlorocyclopenta 6.1 UN2646 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
diene. B74, B77, T20,
TP2, TP13, TP38,
TP45
Hexachlorophene..... 6.1 UN2875 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Hexadecyltrichlorosi 8 UN1781 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
lane. N34, T7, TP2
Hexadienes.......... 3 UN2458 II 3......... IB2, T4, TP1 None.......... 202........ 242........ 5 L 60 L B .......
Hexaethyl 2.3 UN1612 ....... 2.3....... 3 None.......... 334........ None....... Forbidden Forbidden D 40
tetraphosphate and
compressed gas
mixtures.
Hexaethyl 6.1 UN1611 II 6.1....... IB2, N76, T7, 153........... 202........ 243........ 5 L 60 L E 40
tetraphosphate, TP2
liquid.
Hexaethyl 6.1 UN1611 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg E 40
tetraphosphate, N76
solid.
[[Page 202]]
Hexafluoroacetone... 2.3 UN2420 ....... 2.3, 8.... 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
Hexafluoroacetone 6.1 UN2552 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L B 40
hydrate, liquid.
Hexafluoroacetone 6.1 UN3436 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 40
hydrate, solid. T3, TP33
Hexafluoroethane, or 2.2 UN2193 ....... 2.2....... ................ 306........... 304........ 314, 315... 75 kg 150 kg A .......
Refrigerant gas R
116.
Hexafluorophosphoric 8 UN1782 II 8......... A6, A7, B2, IB2, None.......... 202........ 242........ 1 L 30 L A .......
acid. N3, N34, T8,
TP2, TP12
Hexafluoropropylene 2.2 UN1858 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
compressed or
Refrigerant gas R
1216.
Hexaldehyde......... 3 UN1207 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Hexamethylene 6.1 UN2281 II 6.1....... IB2, T7, TP2, 153........... 202........ 243........ 5 L 60 L C 13, 40
diisocyanate. TP13
Hexamethylene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
triperoxide diamine
(dry).
Hexamethylenediamine 8 UN2280 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 12
, solid. TP33
Hexamethylenediamine 8 UN1783 II 8......... IB2, T7, TP2 None.......... 202........ 242........ 1 L 30 L A .......
solution.
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Hexamethyleneimine.. 3 UN2493 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40
Hexamethylenetetrami 4.1 UN1328 III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg A .......
ne. T1, TP33
Hexamethylol benzene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hexanitrate.
Hexanes............. 3 UN1208 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
2,2',4,4',6,6'- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanitro-3,3'-
dihydroxyazobenzene
(dry).
Hexanitroazoxy Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
benzene.
N,N'- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(hexanitrodiphenyl)
ethylene
dinitramine (dry).
Hexanitrodiphenyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
urea.
2,2',3',4,4',6- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanitrodiphenylam
ine.
Hexanitrodiphenylami 1.1D UN0079 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
ne or Dipicrylamine
or Hexyl.
[[Page 203]]
2,3',4,4',6,6'- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanitrodiphenylet
her.
Hexanitroethane..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanitrooxanilide.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanitrostilbene... 1.1D UN0392 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Hexanoic acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Corrosive liquids,
n.o.s..
Hexanols............ 3 UN2282 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A 74
1-Hexene............ 3 UN2370 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
Hexogen and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
cyclotetramethylene
tetranitramine
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
Hexogen and HMX ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
Hexogen and octogen ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
Hexogen, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Cyclotrimethylenetr
initramine, etc.
Hexolite, or Hexotol 1.1D UN0118 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
dry or wetted with
less than 15
percent water, by
mass.
Hexotonal........... 1.1D UN0393 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Hexyl, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanitrodiphenylam
ine.
Hexyltrichlorosilane 8 UN1784 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
N34, T7, TP2,
TP13
High explosives, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
individual
explosives' entries.
HMX, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Cyclotetramethylene
te tranitramine,
etc.
Hydrazine, anhydrous 8 UN2029 I 8, 3, 6.1. A3, A6, A7, A10, None.......... 201........ 243........ Forbidden 2.5 L D 40, 125
B7, B16, B53
Hydrazine, aqueous 6.1 UN3293 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
solution with not
more than 37
percent hydrazine,
by mass.
Hydrazine azide..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hydrazine chlorate.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hydrazine dicarbonic Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid diazide.
[[Page 204]]
Hydrazine aqueous 8 UN2030 I 8, 6.1.... 151, B16, B53, None.......... 201........ 243........ Forbidden 2.5 L D 40
solution, with more T10, TP2, TP13
than 37% hydrazine,
by mass.
.................... ........... .................. II 8, 6.1.... B16, B53, IB2, None.......... 202........ 243........ Forbidden 30 L D 40
T7, TP2, TP13
.................... ........... .................. III 8, 6.1.... B16, B53, IB3, 154........... 203........ 241........ 5 L 60 L D 40
T4, TP1
Hydrazine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
perchlorate.
Hydrazine selenate.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hydriodic acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
anhydrous, see
Hydrogen iodide,
anhydrous.
Hydriodic acid...... 8 UN1787 II 8......... A3, A6, B2, IB2, 154........... 202........ 242........ 1 L 30 L C .......
N41, T7, TP2
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L C 8
Hydrobromic acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
anhydrous, see
Hydrogen bromide,
anhydrous.
Hydrobromic acid, 8 UN1788 II 8......... B2, B15, IB2, 154........... 202........ 242........ Forbidden Forbidden C .......
with more than 49 N41, T7, TP2
percent hydrobromic
acid.
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ Forbidden Forbidden C 8
Hydrobromic acid, 8 UN1788 II 8......... A3, A6, B2, B15, 154........... 202........ 242........ 1 L 30 L C .......
with not more than IB2, N41, T7,
49 percent TP2
hydrobromic acid.
.................... ........... .................. III 8......... A3, IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L C 8
Hydrocarbon gas 2.1 UN1964 ....... 2.1....... ................ 306........... 302........ 314, 315... Forbidden 150 kg E 40
mixture,
compressed, n.o.s..
Hydrocarbon gas 2.1 UN1965 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
mixture, liquefied,
n.o.s..
Hydrocarbons, 3 UN3295 I 3......... 144, T11, TP1, 150........... 201........ 243........ 1 L 30 L E .......
liquid, n.o.s.. TP8, TP28
.................... ........... .................. II 3......... 144, IB2, T7, 150........... 202........ 242........ 5 L 60 L B .......
TP1, TP8, TP28
.................... ........... .................. III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T4, TP1, TP29
Hydrochloric acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
anhydrous, see
Hydrogen chloride,
anhydrous.
[[Page 205]]
Hydrochloric acid... 8 UN1789 II 8......... A3, A6, B3, B15, 154........... 202........ 242........ 1 L 30 L C .......
IB2, N41, T8,
TP2, TP12
.................... ........... .................. III 8......... A3, IB3, T4, 154........... 203........ 241........ 5 L 60 L C 8
TP1, TP12
Hydrocyanic acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
anhydrous, see
Hydrogen cyanide
etc.
Hydrocyanic acid, 6.1 UN1613 I 6.1....... 2, B61, B65, None.......... 195........ 244........ Forbidden Forbidden D 40
aqueous solutions B77, B82, T20,
or Hydrogen TP2, TP13
cyanide, aqueous
solutions with not
more than 20
percent hydrogen
cyanide.
D Hydrocyanic acid, 6.1 NA1613 II 6.1....... IB1, T14, TP2, None.......... 195........ 243........ Forbidden 5 L D 40
aqueous solutions TP13, TP27
with less than 5
percent hydrogen
cyanide.
Hydrocyanic acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
liquefied, see
Hydrogen cyanide,
etc.
Hydrocyanic acid Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(prussic),
unstabilized.
Hydrofluoric acid 8 UN1786 I 8, 6.1.... A6, A7, B15, None.......... 201........ 243........ Forbidden 2.5 L D 40
and Sulfuric acid B23, N5, N34,
mixtures. T10, TP2, TP12,
TP13
Hydrofluoric acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
anhydrous, see
Hydrogen fluoride,
anhydrous.
Hydrofluoric acid, 8 UN1790 I 8, 6.1.... A6, A7, B4, B15, None.......... 201........ 243........ 0.5 L 2.5 L D 12, 40
with more than 60 B23, N5, N34,
percent strength. T10, TP2, TP12,
TP13
Hydrofluoric acid, 8 UN1790 II 8, 6.1.... A6, A7, B15, 154........... 202........ 243........ 1 L 30 L D 12, 40
with not more than IB2, N5, N34,
60 percent strength. T8, TP2, TP12
Hydrofluoroboric ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid, see
Fluoroboric acid.
Hydrofluorosilicic ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid, see
Fluorosilicic acid.
Hydrogen and Methane 2.1 UN2034 ....... 2.1....... ................ 306........... 302........ 302, 314, Forbidden 150 kg E 40, 57
mixtures, 315.
compressed.
Hydrogen bromide, 2.3 UN1048 ....... 2.3, 8.... 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
anhydrous.
Hydrogen chloride, 2.3 UN1050 ....... 2.3, 8.... 3 None.......... 304........ None....... Forbidden Forbidden D 40
anhydrous.
Hydrogen chloride, 2.3 UN2186 ....... 2.3, 8.... 3, B6 None.......... None....... 314, 315... Forbidden Forbidden B 40
refrigerated liquid.
Hydrogen, compressed 2.1 UN1049 ....... 2.1....... ................ 306........... 302........ 302, 314... Forbidden 150 kg E 40, 57
[[Page 206]]
Hydrogen cyanide, 6.1 UN3294 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
solution in alcohol B74, T20, TP2,
with not more than TP13, TP38, TP45
45 percent hydrogen
cyanide.
Hydrogen cyanide, 6.1 UN1051 I 6.1, 3.... 1, B35, B61, None.......... 195........ 244........ Forbidden Forbidden D 40
stabilized with B65, B77, B82
less than 3 percent
water.
Hydrogen cyanide, 6.1 UN1614 I 6.1....... 5 None.......... 195........ None....... Forbidden Forbidden D 25, 40
stabilized, with
less than 3 percent
water and absorbed
in a porous inert
material.
Hydrogen fluoride, 8 UN1052 I 8, 6.1.... 3, B7, B46, B71, None.......... 163........ 243........ Forbidden Forbidden D 40
anhydrous. B77, T10, TP2
Hydrogen in a metal 2.1 UN3468 ....... 2.1....... 167 None.......... 214........ None....... Forbidden Forbidden D .......
hydride storage
system.
Hydrogen iodide, 2.3 UN2197 ....... 2.3....... 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
anhydrous.
Hydrogen iodide ........... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Hydriodic acid.
Hydrogen peroxide 5.1 UN3149 II 5.1, 8.... 145, A2, A3, A6, None.......... 202........ 243........ 1 L 5 L D 25, 66,
and peroxyacetic B53, IB2, T7, 75
acid mixtures, TP2, TP6, TP24
stabilized with
acids, water and
not more than 5
percent
peroxyacetic acid.
Hydrogen peroxide, 5.1 UN2014 II 5.1, 8.... 12, B53, B80, None.......... 202........ 243........ Forbidden Forbidden D 25, 66,
aqueous solutions B81, B85, IB2, 75
with more than 40 T7, TP2, TP6,
percent but not TP24, TP37
more than 60
percent hydrogen
peroxide
(stabilized as
necessary).
Hydrogen peroxide, 5.1 UN2014 II 5.1, 8.... A2, A3, A6, B53, None.......... 202........ 243........ 1 L 5 L D 25, 66,
aqueous solutions IB2, T7, TP2, 75
with not less than TP6, TP24, TP37
20 percent but not
more than 40
percent hydrogen
peroxide
(stabilized as
necessary).
Hydrogen peroxide, 5.1 UN2984 III 5.1....... A1, IB2, T4, 152........... 203........ 241........ 2.5 L 30 L B 25, 66,
aqueous solutions TP1, TP6, TP24, 75
with not less than TP37
8 percent but less
than 20 percent
hydrogen peroxide
(stabilized as
necessary).
[[Page 207]]
Hydrogen peroxide, 5.1 UN2015 I 5.1, 8.... 12, B53, B80, None.......... 201........ 243........ Forbidden Forbidden D 25, 66,
stabilized or B81, B85, T10, 75
Hydrogen peroxide TP2, TP6, TP24,
aqueous solutions, TP37
stabilized with
more than 60
percent hydrogen
peroxide.
Hydrogen, 2.1 UN1966 ....... 2.1....... T75, TP5 None.......... 316........ 318, 319... Forbidden Forbidden D 40
refrigerated liquid
)cryogenic liquid).
Hydrogen selenide, 2.3 UN2202 ....... 2.3, 2.1.. 1 None.......... 192........ 245........ Forbidden Forbidden D 40
anhydrous.
Hydrogen sulfate, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sulfuric acid.
Hydrogen sulfide.... 2.3 UN1053 ....... 2.3, 2.1.. 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
Hydrogendifluorides, 8 UN1740 II 8......... IB8, IP2, IP4, None.......... 212........ 240........ 15 kg 50 kg A 25, 40,
n.o.s.. N3, N34, T3, 52
TP33
.................... ........... .................. III 8......... IB8, IP3, N3, 154........... 213........ 240........ 25 kg 100 kg A 25, 40,
N34, T1, TP33 52
Hydroquinone, solid. 6.1 UN2662 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Hydroquinone 6.1 UN3435 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
solution.
Hydrosilicofluoric ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid, see
Fluorosilicic acid.
Hydroxyl amine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
iodide.
Hydroxylamine 8 UN2865 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
sulfate. TP33
Hypochlorite 8 UN1791 II 8......... A7, B2, B15, 154........... 202........ 242........ 1 L 30 L B 26
solutions. IB2, N34, T7,
TP2, TP24
III 8......... IB3, N34, T4, 154........... 203........ 241........ 5 L 60 L B 26
TP2, TP24
Hypochlorites, 5.1 UN3212 II 5.1....... A9, IB8, IP2, 152........... 212........ 240........ 5 kg 25 kg D 4, 48,
inorganic, n.o.s.. IP4, T3, TP33 52, 56,
58, 69,
106,
116 118
Hyponitrous acid.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Igniter fuse, metal ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
clad, see Fuse,
igniter, tubular,
metal clad.
Igniters............ 1.1G UN0121 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Igniters............ 1.2G UN0314 II 1.2G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Igniters............ 1.3G UN0315 II 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Igniters............ 1.4G UN0325 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Igniters............ 1.4S UN0454 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
3,3'- 8 UN2269 III 8......... IB3, T4, TP2 154........... 203........ 241........ 5 L 60 L A .......
Iminodipropylamine.
G Infectious 6.2 UN2900 ....... 6.2....... A81, A82 134........... 196........ None....... 50 mL or 50 4 L or 4 kg B 40
substances, g
affecting animals
only.
[[Page 208]]
G Infectious 6.2 UN2814 ....... 6.2....... A81, A82 134........... 196........ None....... 50 mL or 50 4 L or 4 kg B 40
substances, g
affecting humans.
Inflammable, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Flammable.
Initiating Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
explosives (dry).
Inositol hexanitrate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
G Insecticide gases, 2.2 UN1968 ....... 2.2....... ................ 306........... 304........ 314, 315... 75 kg 150 kg A .......
n.o.s..
G Insecticide gases, 2.1 UN3354 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg D 40
flammable, n.o.s..
G Insecticide gases, 2.3 UN3355 ....... 2.3, 2.1.. 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
hazard Zone A.
G Insecticide gases, 2.3 UN3355 ....... 2.3, 2.1.. 2, B9, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
hazard Zone B.
G Insecticide gases, 2.3 UN3355 ....... 2.3, 2.1.. 3, B14 None.......... 302, 305... 314, 315... Forbidden Forbidden D .......
toxic, flammable,
n.o.s. Inhalation
hazard Zone C.
G Insecticide gases, 2.3 UN3355 ....... 2.3, 2.1.. 4 None.......... 302, 305... 314, 315... Forbidden Forbidden D .......
toxic, flammable,
n.o.s. Inhalation
hazard Zone D.
G Insecticide gases, 2.3 UN1967 ....... 2.3....... 3 None.......... 193, 334... 245........ Forbidden Forbidden D 40
toxic, n.o.s..
Inulin trinitrate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Iodine azide (dry).. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Iodine monochloride. 8 UN1792 II 8......... B6, IB8, IP2, None.......... 212........ 240........ Forbidden 50 kg D 40, 66,
IP4, N41, T7, 74, 89,
TP2 90
Iodine pentafluoride 5.1 UN2495 I 5.1, 6.1, ................ None.......... 205........ 243........ Forbidden Forbidden D 25, 40,
8. 52, 66,
90
2-Iodobutane........ 3 UN2390 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Iodomethylpropanes.. 3 UN2391 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Iodopropanes........ 3 UN2392 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Iodoxy compounds Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Iridium Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitratopentamine
iridium nitrate.
Iron chloride, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ferric chloride.
[[Page 209]]
Iron oxide, spent, 4.2 UN1376 III 4.2....... B18, IB8, IP3, None.......... 213........ 240........ Forbidden Forbidden E .......
or Iron sponge, T1, TP33
spent obtained from
coal gas
purification.
Iron pentacarbonyl.. 6.1 UN1994 I 6.1, 3.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
B72, B77, T22,
TP2, TP13, TP38,
TP44
Iron sesquichloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ferric chloride.
Irritating material, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Tear gas
substances, etc.
Isobutane see also 2.1 UN1969 ....... 2.1....... 19, T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
Petroleum gases,
liquefied.
Isobutanol or 3 UN1212 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Isobutyl alcohol.
Isobutyl acetate.... 3 UN1213 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Isobutyl acrylate, 3 UN2527 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
stabilized.
Isobutyl alcohol, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Isobutanol.
Isobutyl aldehyde, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see
Isobutyraldehyde.
D Isobutyl 6.1 NA2742 I 6.1, 3, 8. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A 12, 13,
chloroformate. B74, T20, TP4, 22, 25,
TP12, TP13, 40, 48,
TP38, TP45 100
Isobutyl formate.... 3 UN2393 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Isobutyl isobutyrate 3 UN2528 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
+ Isobutyl isocyanate. 3 UN2486 I 3, 6.1.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
B72, T22, TP2,
TP13, TP27
Isobutyl 3 UN2283 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
methacrylate,
stabilized.
Isobutyl propionate. 3 UN2394 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L B .......
Isobutylamine....... 3 UN1214 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40
Isobutylene see also 2.1 UN1055 ....... 2.1....... 19, T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
Petroleum gases,
liquefied.
Isobutyraldehyde or 3 UN2045 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E 40
Isobutyl aldehyde.
Isobutyric acid..... 3 UN2529 III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A .......
Isobutyronitrile.... 3 UN2284 II 3, 6.1.... IB2, T7, TP2, 150........... 202........ 243........ 1 L 60 L E 40
TP13
Isobutyryl chloride. 3 UN2395 II 3, 8...... IB1, T7, TP2 150........... 202........ 243........ 1 L 5 L C 40
G Isocyanates, 3 UN2478 II 3, 6.1.... 5, A3, A7, IB2, 150........... 202........ 243........ 1 L 60 L D 40
flammable, toxic, T11, TP2, TP13,
n.o.s. or TP27
Isocyanate
solutions,
flammable, toxic,
n.o.s. flash point
less than 23
degrees C.
.................... ........... .................. III 3, 6.1.... 5, A3, A7, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T7, TP1, TP13,
TP28
[[Page 210]]
G Isocyanates, toxic, 6.1 UN3080 II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 25, 40,
flammable, n.o.s. TP13, TP27 48
or Isocyanate
solutions, toxic,
flammable, n.o.s.,
flash point not
less than 23
degrees C but not
more than 61
degrees C and
boiling point less
than 300 degrees C.
G Isocyanates, toxic, 6.1 UN2206 II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L E 25, 40,
n.o.s. or TP13, TP27 48
Isocyanate
solutions, toxic,
n.o.s., flash point
more than 61
degrees C and
boiling point less
than 300 degrees C.
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L E 25, 40,
TP13, TP28 48
Isocyanatobenzotrifl 6.1 UN2285 II 6.1, 3.... 5, IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L D 25, 40,
uorides. 48
Isoheptenes......... 3 UN2287 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Isohexenes.......... 3 UN2288 II 3......... IB2, IP8, T11, 150........... 202........ 242........ 5 L 60 L E .......
TP1
Isooctane, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Octanes.
Isooctenes.......... 3 UN1216 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Isopentane, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Pentane.
Isopentanoic acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Corrosive
liquids, n.o.s..
Isopentenes......... 3 UN2371 I 3......... T11, TP2 150........... 201........ 243........ 1 L 30 L E .......
Isophorone 6.1 UN2290 III 6.1....... IB3, T4, TP2 153........... 203........ 241........ 60 L 220 L B 40
diisocyanate.
Isophoronediamine... 8 UN2289 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Isoprene, stabilized 3 UN1218 I 3......... T11, TP2 150........... 201........ 243........ 1 L 30 L E .......
Isopropanol or 3 UN1219 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Isopropyl alcohol.
Isopropenyl acetate. 3 UN2403 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Isopropenylbenzene.. 3 UN2303 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Isopropyl acetate... 3 UN1220 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Isopropyl acid 8 UN1793 III 8......... IB2, T4, TP1 154........... 213........ 240........ 25 kg 100 kg A .......
phosphate.
Isopropyl alcohol, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Isopropanol.
Isopropyl butyrate.. 3 UN2405 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Isopropyl 3 UN2947 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
chloroacetate.
[[Page 211]]
Isopropyl 6.1 UN2407 I 6.1, 3, 8. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden B 40
chloroformate. B74, B77, T20,
TP2, TP13, TP38,
TP44
Isopropyl 2- 3 UN2934 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
chloropropionate.
Isopropyl 3 UN2406 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
isobutyrate.
+ Isopropyl isocyanate 3 UN2483 I 3, 6.1.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
B72, T22, TP2,
TP13, TP38, TP44
Isopropyl mercaptan, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Propanethiols.
Isopropyl nitrate... 3 UN1222 II 3......... IB9 150........... 202........ None....... 5 L 60 L D .......
Isopropyl phosphoric ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid, see Isopropyl
acid phosphate.
Isopropyl propionate 3 UN2409 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Isopropylamine...... 3 UN1221 I 3, 8...... T11, TP2 None.......... 201........ 243........ 0.5 L 2.5 L E .......
Isopropylbenzene.... 3 UN1918 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Isopropylcumyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydroperoxide, with
more than 72
percent in solution.
Isosorbide dinitrate 4.1 UN2907 II 4.1....... IB6, IP2, N85 None.......... 212........ None....... 15 kg 50 kg E 28, 36
mixture with not
less than 60
percent lactose,
mannose, starch or
calcium hydrogen
phosphate.
Isosorbide-5- 4.1 UN3251 III 4.1....... 66, IB8 151........... 213........ 240........ Forbidden Forbidden D 12
mononitrate.
Isothiocyanic acid.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Jet fuel, see Fuel ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
aviation, turbine
engine.
D Jet perforating 1.1D NA0124 II 1.1D...... 55, 56 None.......... 62......... None....... Forbidden Forbidden 07 .......
guns, charged oil
well, with
detonator.
D Jet perforating 1.4D NA0494 II 1.4D...... 55, 56 None.......... 62......... None....... Forbidden Forbidden 06 .......
guns, charged oil
well, with
detonator.
Jet perforating 1.1D UN0124 II 1.1D...... 55 None.......... 62......... None....... Forbidden Forbidden 07 .......
guns, charged oil
well, without
detonator.
Jet perforating 1.4D UN0494 II 1.4D...... 55, 114 None.......... 62......... None....... Forbidden 300 kg 06 .......
guns, charged, oil
well, without
detonator.
Jet perforators, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Charges, shaped,
etc.
Jet tappers, without ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
detonator, see
Charges, shaped,
etc.
Jet thrust igniters, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
for rocket motors
or Jato, see
Igniters.
Jet thrust unit ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(Jato), see Rocket
motors.
Kerosene............ 3 UN1223 III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T2, TP2
G Ketones, liquid, 3 UN1224 I 3......... T11, TP1, TP8, None.......... 201........ 243........ 1 L 30 L E .......
n.o.s.. TP27
[[Page 212]]
.................... ........... .................. II 3......... IB2, T7, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8, TP28
.................... ........... .................. III 3......... B1, IB3, T4, 150........... 203........ 242........ 60 L 220 L A .......
TP1, TP29
Krypton, compressed. 2.2 UN1056 ....... 2.2....... ................ 306........... 302........ None....... 75 kg 150 kg A .......
Krypton, 2.2 UN1970 ....... 2.2....... T75, TP5 320........... None....... None....... 50 kg 500 kg B .......
refrigerated liquid
(cryogenic liquid).
Lacquer base or ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
lacquer chips,
nitrocellulose,
dry, see
Nitrocellulose,
etc. (UN 2557).
Lacquer base or ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
lacquer chips,
plastic, wet with
alcohol or solvent,
see Nitrocellulose
(UN2059, UN2555,
UN2556, UN2557) or
Paint etc.(UN1263).
Lead acetate........ 6.1 UN1616 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Lead arsenates...... 6.1 UN1617 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Lead arsenites...... 6.1 UN1618 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Lead azide (dry).... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Lead azide, wetted 1.1A UN0129 II 1.1A...... 111, 117 None.......... 62......... None....... Forbidden Forbidden 12 .......
with not less than
20 percent water or
mixture of alcohol
and water, by mass.
Lead compounds, 6.1 UN2291 III 6.1....... 138, IB8, IP3, 153........... 213........ 240........ 100 kg 200 kg A .......
soluble, n.o.s.. T1, TP33
Lead cyanide........ 6.1 UN1620 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 52
T3, TP33
Lead dioxide........ 5.1 UN1872 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
Lead dross, see Lead ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
sulfate, with more
than 3 percent free
acid.
Lead nitrate........ 5.1 UN1469 II 5.1, 6.1.. IB8, IP2, IP4, 152........... 212........ 242........ 5 kg 25 kg A .......
T3, TP33
Lead Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitroresorcinate
(dry).
[[Page 213]]
Lead perchlorate, 5.1 UN1470 II 5.1, 6.1.. IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
solid. TP33
Lead perchlorate, 5.1 UN3408 II 5.1, 6.1.. IB2, T4, TP1 152........... 202........ 243........ 1 L 5 L A 56, 58
solution.
III 5.1, 6.1.. IB2, T4, TP1 152........... 203........ 242........ 2.5 L 30 L A 56, 58
Lead peroxide, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Lead dioxide.
Lead phosphite, 4.1 UN2989 II 4.1....... IB8, IP2, IP4, None.......... 212........ 240........ 5 kg 25 kg B 34
dibasic. T3, TP33
.................... ........... .................. III 4.1....... IB8, IP3, T1, 151........... 213........ 240........ 15 kg 50 kg B 34
TP33
Lead picrate (dry).. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Lead styphnate (dry) Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Lead styphnate, 1.1A UN0130 II 1.1A...... 111, 117 None.......... 62......... None....... Forbidden Forbidden 12 .......
wetted or Lead
trinitroresorcinate
, wetted with not
less than 20
percent water or
mixture of alcohol
and water, by mass.
Lead sulfate with 8 UN1794 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A .......
more than 3 percent T3, TP33
free acid.
Lead ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
trinitroresorcinate
, see Lead
styphnate, etc.
Life-saving 9 UN3072 ....... None...... ................ None.......... 219........ None....... No limit No limit A .......
appliances, not
self inflating
containing
dangerous goods as
equipment.
Life-saving 9 UN2990 ....... None...... ................ None.......... 219........ None....... No limit No limit A .......
appliances, self
inflating.
Lighter replacement ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
cartridges
containing
liquefied petroleum
gases (and similar
devices, each not
exceeding 65
grams), see
Lighters or lighter
refills etc.
containing
flammable gas.
Lighters, fuse...... 1.4S UN0131 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
Lighters or Lighter 2.1 UN1057 ....... 2.1....... N10 None.......... 21, 308.... None....... 1 kg 15 kg B 40
refills containing
flammable gas.
Lime, unslaked, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Calcium oxide.
G Liquefied gas, 2.1 UN3161 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg D 40
flammable, n.o.s..
G Liquefied gas, 2.2 UN3163 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
n.o.s..
G Liquefied gas, 2.2 UN3157 ....... 2.2, 5.1.. A14 306........... 304........ 314, 315... 75 kg 150 kg D .......
oxidizing, n.o.s..
G I Liquefied gas, 2.3 UN3308 ....... 2.3, 8.... 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, corrosive,
n.o.s. Inhalation
Hazard Zone A.
[[Page 214]]
G I Liquefied gas, 2.3 UN3308 ....... 2.3, 8.... 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, corrosive,
n.o.s. Inhalation
Hazard Zone B.
G I Liquefied gas, 2.3 UN3308 ....... 2.3, 8.... 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, corrosive,
n.o.s. Inhalation
Hazard Zone C.
G I Liquefied gas, 2.3 UN3308 ....... 2.3, 8.... 4 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, corrosive,
n.o.s. Inhalation
Hazard Zone D.
G I Liquefied gas, 2.3 UN3309 ....... 2.3, 2.1, 1 None.......... 192........ 245........ Forbidden Forbidden D 17, 40
toxic, flammable, 8.
corrosive, n.o.s.
Inhalation Hazard
Zone A.
G I Liquefied gas toxic, 2.3 UN3309 ....... 2.3, 2.1, 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 17, 40
flammable, 8.
corrosive, n.o.s.
Inhalation Hazard
Zone B.
G I Liquefied gas, 2.3 UN3309 ....... 2.3, 2.1, 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 17, 40
toxic, flammable, 8.
corrosive, n.o.s.
Inhalation Hazard
Zone C.
G I Liquefied gas, 2.3 UN3309 ....... 2.3, 2.1, 4 None.......... 304........ 314, 315... Forbidden Forbidden D 17, 40
toxic, flammable, 8.
corrosive, n.o.s.
Inhalation Hazard
Zone D.
G Liquefied gas, 2.3 UN3160 ....... 2.3, 2.1.. 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
Hazard Zone A.
G Liquefied gas, 2.3 UN3160 ....... 2.3, 2.1.. 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
Hazard Zone B.
G Liquefied gas, 2.3 UN3160 ....... 2.3, 2.1.. 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
Hazard Zone C.
G Liquefied gas, 2.3 UN3160 ....... 2.3, 2.1.. 4 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, flammable,
n.o.s. Inhalation
Hazard Zone D.
G Liquefied gas, 2.3 UN3162 ....... 2.3....... 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, n.o.s.
Inhalation Hazard
Zone A.
G Liquefied gas, 2.3 UN3162 ....... 2.3....... 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, n.o.s.
Inhalation Hazard
Zone B.
G Liquefied gas, 2.3 UN3162 ....... 2.3....... 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, n.o.s.
Inhalation Hazard
Zone C.
[[Page 215]]
G Liquefied gas, 2.3 UN3162 ....... 2.3....... 4 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, n.o.s.
Inhalation Hazard
Zone D.
G I Liquefied gas, 2.3 UN3310 ....... 2.3, 5.1, 1 None.......... 192........ 245........ Forbidden Forbidden D 40, 89,
toxic, oxidizing, 8. 90
corrosive, n.o.s.
Inhalation Hazard
Zone A.
G I Liquefied gas, 2.3 UN3310 ....... 2.3, 5.1, 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 89,
toxic, oxidizing, 8. 90
corrosive, n.o.s.
Inhalation Hazard
Zone B.
G I Liquefied gas, 2.3 UN3310 ....... 2.3, 5.1, 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 89,
toxic, oxidizing, 8. 90
corrosive, n.o.s.
Inhalation Hazard
Zone C.
G I Liquefied gas, 2.3 UN3310 ....... 2.3, 5.1, 4 None.......... 304........ 314, 315... Forbidden Forbidden D 40, 89,
toxic, oxidizing, 8. 90
corrosive, n.o.s.
Inhalation Hazard
Zone D.
G Liquefied gas, 2.3 UN3307 ....... 2.3, 5.1.. 1 None.......... 192........ 245........ Forbidden Forbidden D 40
toxic, oxidizing,
n.o.s. Inhalation
Hazard Zone A.
G Liquefied gas, 2.3 UN3307 ....... 2.3, 5.1.. 2, B9, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, oxidizing,
n.o.s. Inhalation
Hazard Zone B.
G Liquefied gas, 2.3 UN3307 ....... 2.3, 5.1.. 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, oxidizing,
n.o.s. Inhalation
Hazard Zone C.
G Liquefied gas, 2.3 UN3307 ....... 2.3, 5.1.. 4 None.......... 304........ 314, 315... Forbidden Forbidden D 40
toxic, oxidizing,
n.o.s. Inhalation
Hazard Zone D.
Liquefied gases, non- 2.2 UN1058 ....... 2.2....... ................ 306........... 304........ None....... 75 kg 150 kg A .......
flammable charged
with nitrogen,
carbon dioxide or
air.
Liquefied ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrocarbon gas,
see Hydrocarbon gas
mixture, liquefied,
n.o.s..
Liquefied natural ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
gas, see Methane,
etc. (UN 1972).
Liquefied petroleum ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
gas see Petroleum
gases, liquefied.
Lithium............. 4.3 UN1415 I 4.3....... A7, A19, IB4, None.......... 211........ 244........ Forbidden 15 kg E 52
IP1, N45
Lithium acetylide ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
ethylenediamine
complex, see Water
reactive solid etc.
Lithium alkyls, 4.2 UN2445 I 4.2, 4.3.. 173, B11, T21, None.......... 181........ 244........ Forbidden Forbidden D .......
liquid. TP2, TP7
Lithium alkyls, 4.2 UN3433 I 4.2, 4.3.. 173, B11, T21, None.......... 181........ 244........ Forbidden Forbidden D .......
solid. TP7, TP33
Lithium aluminum 4.3 UN1410 I 4.3....... A19 None.......... 211........ 242........ Forbidden 15 kg E 52
hydride.
Lithium aluminum 4.3 UN1411 I 4.3, 3.... A2, A3, A11, N34 None.......... 201........ 244........ Forbidden 1 L D 40
hydride, ethereal.
Lithium batteries, 9 UN3091 II 9......... 29, A54, A55, 185........... 185........ None....... See A102, 35 kg A .......
contained in A102, A104 A104
equipment.
[[Page 216]]
Lithium batteries 9 UN3091 II 9......... 29, A54, A55, 185........... 185........ None....... See A101, 35 kg gross A .......
packed with A101, A103 A103
equipment.
Lithium battery..... 9 UN3090 II 9......... 29, A54, A55, 185........... 185........ None....... See A100 35 kg gross A .......
A100
Lithium borohydride. 4.3 UN1413 I 4.3....... A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 52
Lithium ferrosilicon 4.3 UN2830 II 4.3....... A19, IB7, IP2, 151........... 212........ 241........ 15 kg 50 kg E 40, 85,
T3, TP33 103
Lithium hydride..... 4.3 UN1414 I 4.3....... A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 52
Lithium hydride, 4.3 UN2805 II 4.3....... A8, A19, A20, 151........... 212........ 241........ 15 kg 50 kg E 52
fused solid. IB4, T3, TP33
Lithium hydroxide... 8 UN2680 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A .......
T3, TP33
Lithium hydroxide, 8 UN2679 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A 29
solution.
.................... ........... .................. III 8......... IB3, T4, TP2 154........... 203........ 241........ 5 L 60 L A 29, 96
Lithium 5.1 UN1471 II 5.1....... A9, IB8, IP2, 152........... 212........ 240........ 5 kg 25 kg A 4, 48,
hypochlorite, dry IP4, N34 52, 56,
with more than 39% 58, 69,
available chlorine 106,
(8.8% available 116
oxygen) or Lithium
hypochlorite
mixtures, dry with
more than 39%
available chlorine
(8.8% available
oxygen).
Lithium in ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
cartridges, see
Lithium.
Lithium nitrate..... 5.1 UN2722 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
Lithium nitride..... 4.3 UN2806 I 4.3....... A19, IB4, IP1, None.......... 211........ 242........ Forbidden 15 kg E .......
N40
Lithium peroxide.... 5.1 UN1472 II 5.1....... A9, IB6, IP2, 152........... 212........ None....... 5 kg 25 kg A 13, 52,
N34, T3, TP33 66, 75
Lithium silicon..... 4.3 UN1417 II 4.3....... A19, A20, IB7, 151........... 212........ 241........ 15 kg 50 kg A 85, 103
IP2, T3, TP33
LNG, see Methane ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
etc. (UN 1972).
London purple....... 6.1 UN1621 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
LPG, see Petroleum ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
gases, liquefied.
Lye, see Sodium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydroxide,
solutions.
[[Page 217]]
Magnesium alkyls.... 4.2 UN3053 I 4.2, 4.3.. B11, T21, TP2, None.......... 181........ 244........ Forbidden Forbidden D 18
TP7
Magnesium aluminum 4.3 UN1419 I 4.3, 6.1.. A19, N34, N40 None.......... 211........ 242........ Forbidden 15 kg E 40, 52,
phosphide. 85
+ Magnesium arsenate.. 6.1 UN1622 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Magnesium bisulfite ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Bisulfites, aqueous
solutions, n.o.s..
Magnesium bromate... 5.1 UN1473 II 5.1....... A1, IB8, IP4, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
T3, TP33
Magnesium chlorate.. 5.1 UN2723 II 5.1....... IB8, IP2, IP4, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
T3, TP33
Magnesium diamide... 4.2 UN2004 II 4.2....... A8, A19, A20, None.......... 212........ 241........ 15 kg 50 kg C .......
IB6, T3, TP33
Magnesium diphenyl.. 4.2 UN2005 I 4.2....... 173, T21, TP7, None.......... 187........ 244........ Forbidden Forbidden C .......
TP33
Magnesium dross, wet Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
or hot.
Magnesium 6.1 UN2853 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
fluorosilicate. TP33
Magnesium granules, 4.3 UN2950 III 4.3....... A1, A19, IB8, 151........... 213........ 240........ 25 kg 100 kg A 52
coated, particle IP4, T1, TP33
size not less than
149 microns.
Magnesium hydride... 4.3 UN2010 I 4.3....... A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 52
Magnesium or 4.1 UN1869 III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg A 39, 52,
Magnesium alloys T1, TP33 53, 74,
with more than 50 101
percent magnesium
in pellets,
turnings or ribbons.
Magnesium nitrate... 5.1 UN1474 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
Magnesium 5.1 UN1475 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
perchlorate. TP33
Magnesium peroxide.. 5.1 UN1476 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 13, 52,
TP33 66, 75
Magnesium phosphide. 4.3 UN2011 I 4.3, 6.1.. A19, N40 None.......... 211........ None....... Forbidden 15 kg E 40, 52,
85
Magnesium, powder or 4.3 UN1418 I 4.3, 4.2.. A19, B56 None.......... 211........ 244........ Forbidden 15 kg A 39, 52
Magnesium alloys,
powder.
.................... ........... .................. II 4.3, 4.2.. A19, B56, IB5, None.......... 212........ 241........ 15 kg 50 kg A 39, 52
IP2, T3, TP33
.................... ........... .................. III 4.3, 4.2.. A19, B56, IB8, None.......... 213........ 241........ 25 kg 100 kg A 39, 52
IP4, T1, TP33
Magnesium scrap, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Magnesium, etc. (UN
1869).
Magnesium silicide.. 4.3 UN2624 II 4.3....... A19, A20, IB7, 151........... 212........ 241........ 15 kg 50 kg B 85, 103
IP2, T3, TP33
Magnetized material, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sec. 173.21.
Maleic anhydride.... 8 UN2215 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
TP33
[[Page 218]]
Maleic anhydride, 8 UN2215 III 8......... T4, TP3 None.......... 213........ 240........ Forbidden Forbidden A .......
molten.
Malononitrile....... 6.1 UN2647 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 12
T3, TP33
Mancozeb (manganese ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
ethylenebisdithioca
rbamate complex
with zinc) see
Maneb.
Maneb or Maneb 4.2 UN2210 III 4.2, 4.3.. 57, A1, A19, None.......... 213........ 242........ 25 kg 100 kg A 34
preparations with IB6, T1, TP33
not less than 60
percent maneb.
Maneb stabilized or 4.3 UN2968 III 4.3....... 54, A1, A19, 151........... 213........ 242........ 25 kg 100 kg B 34, 52
Maneb preparations, IB8, IP4, T1,
stabilized against TP33
self-heating.
Manganese nitrate... 5.1 UN2724 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
Manganese resinate.. 4.1 UN1330 III 4.1....... A1, IB6, T1, 151........... 213........ 240........ 25 kg 100 kg A .......
TP33
Mannitan Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetranitrate.
Mannitol hexanitrate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Mannitol 1.1D UN0133 II 1.1D...... 121 None.......... 62......... None....... Forbidden Forbidden 10 .......
hexanitrate, wetted
or Nitromannite,
wetted with not
less than 40
percent water, or
mixture of alcohol
and water, by mass.
Marine pollutants, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
liquid or solid,
n.o.s., see
Environmentally
hazardous
substances, liquid
or solid, n.o.s..
Matches, block, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Matches, 'strike
anywhere'.
Matches, fusee...... 4.1 UN2254 III 4.1....... ................ 186........... 186........ None....... Forbidden Forbidden A .......
Matches, safety 4.1 UN1944 III 4.1....... ................ 186........... 186........ None....... 25 kg 100 kg A .......
(book, card or
strike on box).
Matches, strike 4.1 UN1331 III 4.1....... ................ 186........... 186........ None....... Forbidden Forbidden B .......
anywhere.
Matches, wax, Vesta. 4.1 UN1945 III 4.1....... ................ 186........... 186........ None....... 25 kg 100 kg B .......
Matting acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Sulfuric acid.
Medicine, liquid, 3 UN3248 II 3, 6.1.... 36, IB2 150........... 202........ None....... 1 L 5 L B 40
flammable, toxic,
n.o.s..
.................... ........... .................. III 3, 6.1.... 36, IB3 150........... 203........ None....... 5 L 5 L A .......
Medicine, liquid, 6.1 UN1851 II 6.1....... 36 153........... 202........ 243........ 5 L 5 L C 40
toxic, n.o.s..
[[Page 219]]
.................... ........... .................. III 6.1....... 36 153........... 203........ 241........ 5 L 5 L C 40
Medicine, solid, 6.1 UN3249 II 6.1....... 36, T3, TP33 153........... 212........ None....... 5 kg 5 kg C 40
toxic, n.o.s..
.................... ........... .................. III 6.1....... 36, T1, TP33 153........... 213........ None....... 5 kg 5 kg C 40
Memtetrahydrophthali ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
c anhydride, see
Corrosive liquids,
n.o.s..
Mercaptans, liquid, 3 UN3336 I 3......... T11, TP2 150........... 201........ 243........ 1 L 30 L E 95
flammable, n.o.s.
or Mercaptan
mixture, liquid,
flammable, n.o.s..
.................... ........... .................. II 3......... IB2, T7, TP1, 150........... 202........ 242........ 5 L 60 L B 95
TP8, TP28
.................... ........... .................. III 3......... B1, B52, IB3, 150........... 203........ 241........ 60 L 220 L B 95
T4, TP1, TP29
Mercaptans, liquid, 3 UN1228 II 3, 6.1.... IB2, T11, TP2, None.......... 202........ 243........ Forbidden 60 L B 40, 95
flammable, toxic, TP27
n.o.s. or Mercaptan
mixtures, liquid,
flammable, toxic,
n.o.s..
.................... ........... .................. III 3, 6.1.... A6, B1, IB3, T7, 150........... 203........ 242........ 5 L 220 L A 40, 95
TP1, TP28
Mercaptans, liquid, 6.1 UN3071 II 6.1, 3.... A6, IB2, T11, 153........... 202........ 243........ 5 L 60 L C 40, 121
toxic, flammable, TP2, TP13, TP27
n.o.s. or Mercaptan
mixtures, liquid,
toxic, flammable,
n.o.s., flash point
not less than 23
degrees C.
5-Mercaptotetrazol-1- 1.4C UN0448 II 1.4C...... ................ None.......... 62......... None....... Forbidden 75 kg 09 .......
acetic acid.
Mercuric arsenate... 6.1 UN1623 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercuric chloride... 6.1 UN1624 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercuric compounds, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Mercury
compounds, etc.
Mercuric nitrate.... 6.1 UN1625 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
N73, T3, TP33
+ Mercuric potassium 6.1 UN1626 I 6.1....... IB7, IP1, N74, None.......... 211........ 242........ 5 kg 50 kg A 52
cyanide. N75, T6, TP33
Mercuric ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
sulfocyanate, see
Mercury thiocyanate.
Mercurol, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Mercury nucleate.
Mercurous azide..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Mercurous compounds, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Mercury
compounds, etc.
Mercurous nitrate... 6.1 UN1627 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
A W Mercury............. 8 UN2809 III 8......... ................ 164........... 164........ 240........ 35 kg 35 kg B 40, 97
Mercury acetate..... 6.1 UN1629 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury acetylide... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Mercury ammonium 6.1 UN1630 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
chloride. T3, TP33
[[Page 220]]
Mercury based 3 UN2778 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticides, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Mercury based 6.1 UN3012 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Mercury based 6.1 UN3011 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... IB3, T7, TP2, 153........... 203........ 242........ 60 L 220 L A 40
TP28
Mercury based 6.1 UN2777 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Mercury benzoate.... 6.1 UN1631 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury bromides.... 6.1 UN1634 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury compounds, 6.1 UN2024 I 6.1....... ................ None.......... 201........ 243........ 1 L 30 L B 40
liquid, n.o.s..
.................... ........... .................. II 6.1....... IB2 153........... 202........ 243........ 5 L 60 L B 40
.................... ........... .................. III 6.1....... IB3 153........... 203........ 241........ 60 L 220 L B 40
Mercury compounds, 6.1 UN2025 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A .......
solid, n.o.s.. TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
[[Page 221]]
A Mercury contained in 8 UN2809 III 8......... ................ None.......... 164........ None....... No limit No limit B 40, 97
manufactured
articles.
Mercury cyanide..... 6.1 UN1636 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 52
N74, N75, T3,
TP33
Mercury fulminate, 1.1A UN0135 II 1.1A...... 111, 117 None.......... 62......... None....... Forbidden Forbidden 12 .......
wetted with not
less than 20
percent water, or
mixture of alcohol
and water, by mass.
Mercury gluconate... 6.1 UN1637 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury iodide...... 6.1 UN1638 II 6.1....... IB2, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury iodide Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
aquabasic
ammonobasic (Iodide
of Millon's base).
Mercury nitride..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Mercury nucleate.... 6.1 UN1639 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury oleate...... 6.1 UN1640 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury oxide....... 6.1 UN1641 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury oxycyanide.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Mercury oxycyanide, 6.1 UN1642 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 52, 91
desensitized. T3, TP33
Mercury potassium 6.1 UN1643 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
iodide. T3, TP33
Mercury salicylate.. 6.1 UN1644 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
+ Mercury sulfates.... 6.1 UN1645 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mercury thiocyanate. 6.1 UN1646 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Mesityl oxide....... 3 UN1229 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
G Metal carbonyls, 6.1 UN3281 I 6.1....... 5, T14, TP2, None.......... 201........ 243........ 1 L 30 L B 40
liquid, n.o.s.. TP13, TP27
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A 40
TP28
G Metal carbonyls, 6.1 UN3466 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg D 40
solid, n.o.s.. TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg B 40
TP33
Metal catalyst, dry. 4.2 UN2881 I 4.2....... N34, T21, TP7, None.......... 187........ None....... Forbidden Forbidden C .......
TP33
[[Page 222]]
.................... ........... .................. II 4.2....... IB6, IP2, N34, None.......... 187........ 242........ Forbidden 50 kg C .......
T3, TP33
.................... ........... .................. III 4.2....... IB8, IP3, N34, None.......... 187........ 241........ 25 kg 100 kg C .......
T1, TP33
Metal catalyst, 4.2 UN1378 II 4.2....... A2, A8, IB1, None.......... 212........ None....... Forbidden 50 kg C .......
wetted with a N34, T3, TP33
visible excess of
liquid.
Metal hydrides, 4.1 UN3182 II 4.1....... A1, IB4, T3, 151........... 212........ 240........ 15 kg 50 kg E .......
flammable, n.o.s.. TP33
.................... ........... .................. III 4.1....... A1, IB4, T1, 151........... 213........ 240........ 25 kg 100 kg E .......
TP33
Metal hydrides, 4.3 UN1409 I 4.3....... A19, N34, N40 None.......... 211........ 242........ Forbidden 15 kg D 52
water reactive,
n.o.s..
.................... ........... .................. II 4.3....... A19, IB4, N34, 151........... 212........ 242........ 15 kg 50 kg D 52
N40, T3, TP33
Metal powder, self- 4.2 UN3189 II 4.2....... IB6, IP2, T3, None.......... 212........ 241........ 15 kg 50 kg C .......
heating, n.o.s.. TP33
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg C .......
TP33
Metal powders, 4.1 UN3089 II 4.1....... IB8, IP2, IP4, 151........... 212........ 240........ 15 kg 50 kg B .......
flammable, n.o.s.. T3, TP33
.................... ........... .................. III 4.1....... IB6, T1, TP33 151........... 213........ 240........ 25 kg 100 kg B .......
Metal salts of Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
methyl nitramine
(dry).
G Metal salts of 4.1 UN3181 II 4.1....... A1, IB8, IP2, 151........... 212........ 240........ 15 kg 50 kg B 40
organic compounds, IP4, T3, TP33
flammable, n.o.s..
.................... ........... .................. III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg B 40
T1, TP33
Metaldehyde......... 4.1 UN1332 III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
G Metallic substance, 4.3 UN3208 I 4.3....... A7, IB4 None.......... 211........ 242........ Forbidden 15 kg E 40
water-reactive,
n.o.s..
.................... ........... .................. II 4.3....... A7, IB7, IP2, 151........... 212........ 242........ 15 kg 50 kg E 40
T3, TP33
.................... ........... .................. III 4.3....... A7, IB8, IP4, 151........... 213........ 241........ 25 kg 100 kg E 40
T1, TP33
G Metallic substance, 4.3 UN3209 I 4.3, 4.2.. A7 None.......... 211........ 242........ Forbidden 15 kg E 40
water-reactive,
self-heating,
n.o.s..
.................... ........... .................. II 4.3, 4.2.. A7, IB5, IP2, None.......... 212........ 242........ 15 kg 50 kg E 40
T3, TP33
[[Page 223]]
.................... ........... .................. III 4.3, 4.2.. A7, IB8, IP4, None.......... 213........ 242........ 25 kg 100 kg E 40
T1, TP33
Methacrylaldehyde, 3 UN2396 II 3, 6.1.... 45, IB2, T7, 150........... 202........ 243........ 1 L 60 L E 40
stabilized. TP1, TP13
Methacrylic acid, 8 UN2531 II 8......... IB2, T7, TP1, 154........... 202........ 242........ 1 L 30 L C 40
stabilized. TP18, TP30
+ Methacrylonitrile, 3 UN3079 I 3, 6.1.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 12, 40,
stabilized. B74, T20, TP2, 48
TP13, TP38, TP45
Methallyl alcohol... 3 UN2614 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Methane and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrogen, mixtures,
see Hydrogen and
methane, mixtures,
etc.
Methane, compressed 2.1 UN1971 ....... 2.1....... ................ 306........... 302........ 302........ Forbidden 150 kg E 40
or Natural gas,
compressed (with
high methane
content).
Methane, 2.1 UN1972 ....... 2.1....... T75, TP5 None.......... None....... 318........ Forbidden Forbidden D 40
refrigerated liquid
(cryogenic liquid)
or Natural gas,
refrigerated liquid
(cryogenic liquid),
with high methane
content).
Methanesulfonyl 6.1 UN3246 I 6.1, 8.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
chloride. B74, T20, TP2,
TP12, TP13,
TP38, TP45
+ I Methanol............ 3 UN1230 II 3, 6.1.... IB2, T7, TP2 150........... 202........ 242........ 1 L 60 L B 40
D Methanol............ 3 UN1230 II 3......... IB2, T7, TP2 150........... 202........ 242........ 1 L 60 L B 40
Methazoic acid...... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
4-Methoxy-4- 3 UN2293 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
methylpentan-2-one.
1-Methoxy-2-propanol 3 UN3092 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
+ Methoxymethyl 3 UN2605 I 3, 6.1.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
isocyanate. B72, T22, TP2,
TP13, TP38, TP44
Methyl acetate...... 3 UN1231 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Methyl acetylene and 2.1 UN1060 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
propadiene
mixtures,
stabilized.
Methyl acrylate, 3 UN1919 II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L B .......
stabilized. TP13
Methyl alcohol, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Methanol.
Methyl allyl 3 UN2554 II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L E .......
chloride. TP13
Methyl amyl ketone, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Amyl methyl
ketone.
Methyl bromide...... 2.3 UN1062 ....... 2.3....... 3, B14, T50 None.......... 193........ 314, 315... Forbidden Forbidden D 40
[[Page 224]]
Methyl bromide and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
chloropicrin
mixtures with more
than 2 percent
chloropicrin, see
Chloropicrin and
methyl bromide
mixtures.
Methyl bromide and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
chloropicrin
mixtures with not
more than 2 percent
chloropicrin, see
Methyl bromide.
Methyl bromide and 6.1 UN1647 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden C 40
ethylene dibromide B74, N65, T20,
mixtures, liquid. TP2, TP13, TP38,
TP44
Methyl bromoacetate. 6.1 UN2643 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L D 40
2-Methylbutanal..... 3 UN3371 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
2-Methyl-1-butene... 3 UN2459 I 3......... T11, TP2 None.......... 201........ 243........ 1 L 30 L E .......
2-Methyl-2-butene... 3 UN2460 II 3......... IB2, IP8, T7, None.......... 202........ 242........ 5 L 60 L E .......
TP1
3-Methyl-1-butene... 3 UN2561 I 3......... T11, TP2 None.......... 201........ 243........ 1 L 30 L E .......
Methyl tert-butyl 3 UN2398 II 3......... IB2, T7, TP1 150........... 202........ 242........ 5 L 60 L E .......
ether.
Methyl butyrate..... 3 UN1237 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Methyl chloride, or 2.1 UN1063 ....... 2.1....... T50 306........... 304........ 314, 315... 5 kg 100 kg D 40
Refrigerant gas R
40.
Methyl chloride and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
chloropicrin
mixtures, see
Chloropicrin and
methyl chloride
mixtures.
Methyl chloride and 2.1 UN1912 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg D 40
methylene chloride
mixtures.
Methyl chloroacetate 6.1 UN2295 I 6.1, 3.... T14, TP2, TP13 None.......... 201........ 243........ 1 L 30 L D .......
Methyl ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
chlorocarbonate,
see Methyl
chloroformate.
Methyl chloroform, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see 1,1,1-
Trichloroethane.
Methyl chloroformate 6.1 UN1238 I 6.1, 3, 8. 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 21, 40,
B72, N34, T22, 100
TP2, TP13, TP38,
TP44
Methyl chloromethyl 6.1 UN1239 I 6.1, 3.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
ether. B72, T22, TP2,
TP38, TP44
[[Page 225]]
Methyl 2- 3 UN2933 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
chloropropionate.
Methyl 6.1 UN2299 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
dichloroacetate.
Methyl ethyl ether, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ethyl methyl
ether.
Methyl ethyl ketone, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ethyl methyl
ketone.
Methyl ethyl ketone Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxide, in
solution with more
than 9 percent by
mass active oxygen.
2-Methyl-5- 6.1 UN2300 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
ethylpyridine.
Methyl fluoride, or 2.1 UN2454 ....... 2.1....... ................ 306........... 304........ 314, 315... Forbidden 150 kg E 40
Refrigerant gas R
41.
Methyl formate...... 3 UN1243 I 3......... T11, TP2 150........... 201........ 243........ 1 L 30 L E .......
2-Methyl-2- 6.1 UN3023 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40, 102
heptanethiol. B74, T20, TP2,
TP13, TP38, TP45
Methyl iodide....... 6.1 UN2644 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A 12, 40
B74, T20, TP2,
TP13, TP38, TP45
Methyl isobutyl 3 UN2053 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
carbinol.
Methyl isobutyl 3 UN1245 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
ketone.
Methyl isobutyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
ketone peroxide, in
solution with more
than 9 percent by
mass active oxygen.
Methyl isocyanate... 6.1 UN2480 I 6.1, 3.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40, 52
B72, T22, TP2,
TP13, TP38, TP44
Methyl isopropenyl 3 UN1246 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
ketone, stabilized.
Methyl 6.1 UN2477 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A .......
isothiocyanate. B74, T20, TP2,
TP13, TP38, TP45
Methyl isovalerate.. 3 UN2400 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Methyl magnesium 4.3 UN1928 I 4.3, 3.... ................ None.......... 201........ 243........ Forbidden 1 L D .......
bromide, in ethyl
ether.
Methyl mercaptan.... 2.3 UN1064 ....... 2.3, 2.1.. 3, B7, B9, B14, None.......... 304........ 314, 315... Forbidden Forbidden D 40
T50
Methyl ........... .......... .............. ........... ........... ........... ........... .......
mercaptopropionalde
hyde, see 4-
Thiapentanal.
Methyl methacrylate 3 UN1247 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
monomer, stabilized.
Methyl nitramine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Methyl nitrate...... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Methyl nitrite...... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
[[Page 226]]
Methyl norbornene ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dicarboxylic
anhydride, see
Corrosive liquids,
n.o.s..
Methyl orthosilicate 6.1 UN2606 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden E 40
B74, T20, TP2,
TP13, TP38, TP45
D Methyl phosphonic 6.1 NA9206 I 6.1, 8.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden C .......
dichloride. B74, N34, N43,
T20, TP4, TP12,
TP13, TP38, TP45
Methyl ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
phosphonothioic
dichloride,
anhydrous, see
Corrosive liquid,
n.o.s..
D Methyl phosphonous 6.1 NA2845 I 6.1, 4.2.. 2, B9, B14, B16, None.......... 227........ 244........ Forbidden Forbidden D 18
dichloride, B32, B74, T20,
pyrophoric liquid. TP4, TP12, TP13,
TP38, TP45
Methyl picric acid Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(heavy metal salts
of).
Methyl propionate... 3 UN1248 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Methyl propyl ether. 3 UN2612 II 3......... IB2, IP8, T7, 150........... 202........ 242........ 5 L 60 L E 40
TP2
Methyl propyl ketone 3 UN1249 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Methyl sulfate, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dimethyl sulfate.
Methyl sulfide, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dimethyl sulfide.
Methyl 6.1 UN2533 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
trichloroacetate.
Methyl trimethylol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
methane trinitrate.
Methyl vinyl ketone, 6.1 UN1251 I 6.1, 3, 8. 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden B 40
stabilized. B72, T22, TP2,
TP13, TP38, TP44
Methylal............ 3 UN1234 II 3......... IB2, IP8, T7, None.......... 202........ 242........ 5 L 60 L E .......
TP2
Methylamine, 2.1 UN1061 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
anhydrous.
[[Page 227]]
Methylamine, aqueous 3 UN1235 II 3, 8...... B1, IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L E 135
solution.
Methylamine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitramine and dry
salts thereof.
Methylamine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitroform.
Methylamine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
perchlorate (dry).
Methylamyl acetate.. 3 UN1233 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
N-Methylaniline..... 6.1 UN2294 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
alpha-Methylbenzyl 6.1 UN2937 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
alcohol, liquid.
alpha-Methylbenzyl 6.1 UN3438 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
alcohol, solid. TP33
3-Methylbutan-2-one. 3 UN2397 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
N-Methylbutylamine.. 3 UN2945 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40
Methylchlorosilane.. 2.3 UN2534 ....... 2.3, 2.1, 2, B9, B14, N34 None.......... 226........ 314, 315... Forbidden Forbidden D 17, 40
8.
Methylcyclohexane... 3 UN2296 II 3......... B1, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Methylcyclohexanols, 3 UN2617 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
flammable.
Methylcyclohexanone. 3 UN2297 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Methylcyclopentane.. 3 UN2298 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
D Methyldichloroarsine 6.1 NA1556 I 6.1....... 2, T20, TP4, None.......... 192........ None....... Forbidden Forbidden D 40
TP12, TP13,
TP38, TP45
Methyldichlorosilane 4.3 UN1242 I 4.3, 8, 3. A2, A3, A7, B6, None.......... 201........ 243........ Forbidden 1 L D 21, 28,
B77, N34, T10, 40, 49,
TP2, TP7, TP13 100
Methylene chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Dichloromethane.
Methylene glycol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dinitrate.
2-Methylfuran....... 3 UN2301 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
a-Methylglucoside Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetranitrate.
a-Methylglycerol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
trinitrate.
5-Methylhexan-2-one. 3 UN2302 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Methylhydrazine..... 6.1 UN1244 I 6.1, 3, 8. 1, B7, B9, B14, None.......... 226........ 244........ Forbidden Forbidden D 21, 40,
B30, B72, B77, 49, 100
N34, T22, TP2,
TP13, TP38, TP44
4-Methylmorpholine 3 UN2535 II 3, 8...... B6, IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40
or n-
methylmorpholine.
Methylpentadienes... 3 UN2461 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L E .......
2-Methylpentan-2-ol. 3 UN2560 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Methylpentanes, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanes.
Methylphenyldichloro 8 UN2437 II 8......... IB2, T7, TP2, 154........... 202........ 242........ 1 L 30 L C 40
silane. TP13
1-Methylpiperidine.. 3 UN2399 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B .......
Methyltetrahydrofura 3 UN2536 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
n.
Methyltrichlorosilan 3 UN1250 I 3, 8...... A7, B6, B77, None.......... 201........ 243........ Forbidden 2.5 L B 40
e. N34, T11, TP2,
TP13
[[Page 228]]
alpha- 3 UN2367 II 3......... B1, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Methylvaleraldehyde.
Mine rescue ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
equipment
containing carbon
dioxide, see Carbon
dioxide.
Mines with bursting 1.1F UN0136 II 1.1F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
charge.
Mines with bursting 1.1D UN0137 II 1.1D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
charge.
Mines with bursting 1.2D UN0138 II 1.2D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
charge.
Mines with bursting 1.2F UN0294 II 1.2F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
charge.
Mixed acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrating acid,
mixtures etc.
Mobility aids, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Battery powered
equipment or
Battery powered
vehicle'.
D Model rocket motor.. 1.4C NA0276 II 1.4C...... 51 None.......... 62......... None....... Forbidden 75 kg 06 .......
D Model rocket motor.. 1.4S NA0323 II 1.4S...... 51 None.......... 62......... None....... 25 kg 100 kg 05 .......
Molybdenum 8 UN2508 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg C 40
pentachloride. TP33
Monochloroacetone Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(unstabilized).
Monochloroethylene, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Vinyl chloride,
stabilized.
Monoethanolamine, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ethanolamine,
solutions.
Monoethylamine, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ethylamine.
Morpholine.......... 8 UN2054 I 8, 3...... A6, T10, TP2 None.......... 201........ 243........ 0.5 L 2.5 L A .......
Morpholine, aqueous, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixture, see
Corrosive liquids,
n.o.s..
Motor fuel anti- ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
knock compounds see
Motor fuel anti-
knock mixtures.
+ Motor fuel anti- 6.1 UN1649 I 6.1, 3.... 14, 151, B9, None.......... 201........ 244........ Forbidden 30 L D 25, 40
knock mixtures. B90, T14, TP2,
TP13
Motor spirit, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Gasoline.
Muriatic acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hydrochloric acid.
Musk xylene, see 5- ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tert-Butyl-2,4,6-
trinitro-m-xylene.
[[Page 229]]
Naphtha see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Petroleum
distillates n.o.s..
Naphthalene, crude 4.1 UN1334 III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg A .......
or Naphthalene, T1, TP33
refined.
Naphthalene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diozonide.
beta-Naphthylamine, 6.1 UN1650 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
solid. T3, TP33
beta-Naphthylamine 6.1 UN3411 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
solution.
.................... ........... .................. III 6.1....... IB2, T7, TP2 153........... 203........ 241........ 60 L 220 L A .......
alpha-Naphthylamine. 6.1 UN2077 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Naphthalene, molten. 4.1 UN2304 III 4.1....... IB1, T1, TP3 151........... 213........ 241........ Forbidden Forbidden C .......
Naphthylamineperchlo Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
rate.
Naphthylthiourea.... 6.1 UN1651 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Naphthylurea........ 6.1 UN1652 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Natural gases (with ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
high methane
content), see
Methane, etc. (UN
1971, UN 1972).
Neohexane, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexanes.
Neon, compressed.... 2.2 UN1065 ....... 2.2....... ................ 306........... 302........ 302........ 75 kg 150 kg A .......
Neon, refrigerated 2.2 UN1913 ....... 2.2....... T75, TP5 320........... 316........ None....... 50 kg 500 kg B .......
liquid (cryogenic
liquid).
New explosive or ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
explosive device,
see Sec. Sec.
173.51 and 173.56.
Nickel carbonyl..... 6.1 UN1259 I 6.1, 3.... 1 None.......... 198........ None....... Forbidden Forbidden D 18, 40
Nickel cyanide...... 6.1 UN1653 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 52
N74, N75, T3,
TP33
Nickel nitrate...... 5.1 UN2725 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
Nickel nitrite...... 5.1 UN2726 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
T1, TP33
Nickel picrate...... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nicotine............ 6.1 UN1654 II 6.1....... IB2 153........... 202........ 243........ 5 L 60 L A .......
Nicotine compounds, 6.1 UN3144 I 6.1....... A4 None.......... 201........ 243........ 1 L 30 L B 40
liquid, n.o.s. or
Nicotine
preparations,
liquid, n.o.s..
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L B 40
TP28
Nicotine compounds, 6.1 UN1655 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg B .......
solid, n.o.s. or TP33
Nicotine
preparations,
solid, n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
[[Page 230]]
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Nicotine 6.1 UN1656 II 6.1....... IB2 153........... 202........ 243........ 5 L 60 L A .......
hydrochloride
liquid or solution.
.................... ........... .................. III 6.1....... IB3 153........... 203........ 241........ 60 L 220 L A .......
Nicotine 6.1 UN3444 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
hydrochloride, T3, TP33
solid.
Nicotine salicylate. 6.1 UN1657 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Nicotine sulfate 6.1 UN1658 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
solution.
.................... ........... .................. III 6.1....... IB3, T7, TP2 153........... 203........ 241........ 60 L 220 L A .......
Nicotine sulphate, 6.1 UN3445 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
solid. T3, TP33
Nicotine tartrate... 6.1 UN1659 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Nitrated paper Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(unstable).
Nitrates, inorganic, 5.1 UN3218 II 5.1....... 58, IB2, T4, TP1 152........... 202........ 242........ 1 L 5 L B 56, 58,
aqueous solution, 133
n.o.s..
.................... ........... .................. III 5.1....... 58, IB2, T4, TP1 152........... 203........ 241........ 2.5 L 30 L B 56, 58,
133
Nitrates, inorganic, 5.1 UN1477 II 5.1....... IB8, IP2, IP4, 152........... 212........ 240........ 5 kg 25 kg A 56, 58
n.o.s.. T3, TP33
.................... ........... .................. III 5.1....... IB8, IP3, T1, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
TP33
Nitrates of Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diazonium compounds.
Nitrating acid 8 UN1826 I 8, 5.1.... A7, T10, TP2, None.......... 158........ 243........ Forbidden 2.5 L D 40, 66
mixtures, spent TP12, TP13
with more than 50
percent nitric acid.
Nitrating acid 8 UN1826 II 8......... A7, B2, IB2, T8, None.......... 158........ 242........ Forbidden 30 L D 40
mixtures spent with TP2, TP12
not more than 50
percent nitric acid.
Nitrating acid 8 UN1796 I 8, 5.1.... A7, T10, TP2, None.......... 158........ 243........ Forbidden 2.5 L D 40, 66
mixtures with more TP12, TP13
than 50 percent
nitric acid.
Nitrating acid 8 UN1796 II 8......... A7, B2, IB2, T8, None.......... 158........ 242........ Forbidden 30 L D 40
mixtures with not TP2, TP12, TP13
more than 50
percent nitric acid.
[[Page 231]]
Nitric acid other 8 UN2031 I 8, 5.1.... A3, B47, B53, None.......... 158........ 243........ Forbidden 2.5 L D 44, 66,
than red fuming, T10, TP2, TP12, 89, 90,
with more than 70 TP13 110,
percent nitric acid. 111
Nitric acid other 8 UN2031 II 8......... A6, B2, B47, None.......... 158........ 242........ Forbidden 30 L D 44, 66,
than red fuming, B53, IB2, T8, 89, 90,
with not more than TP2, TP12 110,
70 percent nitric 111
acid.
+ Nitric acid, red 8 UN2032 I 8, 5.1, 2, B9, B32, B74, None.......... 227........ 244........ Forbidden Forbidden D 40, 66,
fuming. 6.1. T20, TP2, TP12, 74, 89,
TP13, TP38, TP45 90
Nitric oxide, 2.3 UN1660 ....... 2.3, 5.1, 1, B37, B46, None.......... 337........ None....... Forbidden Forbidden D 40, 89,
compressed. 8. B50, B60, B77 90
Nitric oxide and 2.3 UN1975 ....... 2.3, 5.1, 1, B7, B9, B14, None.......... 337........ None....... Forbidden Forbidden D 40, 89,
dinitrogen 8. B45, B46, B61, 90
tetroxide mixtures B66, B67, B77
or Nitric oxide and
nitrogen dioxide
mixtures.
G Nitriles, flammable, 3 UN3273 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L E 40, 52
toxic, n.o.s.. TP27
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40, 52
TP13, TP27
G Nitriles, toxic, 6.1 UN3275 I 6.1, 3.... 5, T14, TP2, None.......... 201........ 243........ 1 L 30 L B 40, 52
flammable, n.o.s.. TP13, TP27
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40, 52
TP13, TP27
G Nitriles, toxic, 6.1 UN3276 I 6.1....... 5, T14, TP2, None.......... 201........ 243........ 1 L 30 L B 52
liquid, n.o.s.. TP13, TP27
II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 52
TP27
III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A 52
TP28
G Nitriles, toxic, 6.1 UN3439 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg D 52
solid, n.o.s.. TP33
II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 52
T3, TP33
III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
TP33
Nitrites, inorganic, 5.1 UN3219 II 5.1....... IB1, T4, TP1 152........... 202........ 242........ 1 L 5 L B 46, 56,
aqueous solution, 58, 133
n.o.s..
.................... ........... .................. III 5.1....... IB2, T4, TP1 152........... 203........ 241........ 2.5 L 30 L B 46, 56,
58, 133
Nitrites, inorganic, 5.1 UN2627 II 5.1....... 33, IB8, IP4, 152........... 212........ None....... 5 kg 25 kg A 46, 56,
n.o.s.. T3, TP33 58, 133
3-Nitro-4- 6.1 UN2307 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40
chlorobenzotrifluor
ide.
6-Nitro-4- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diazotoluene-3-
sulfonic acid (dry).
Nitro isobutane Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
triol trinitrate.
N-Nitro-N- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
methylglycolamide
nitrate.
[[Page 232]]
2-Nitro-2- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
methylpropanol
nitrate.
Nitro urea.......... 1.1D UN0147 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
N-Nitroaniline...... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
+ Nitroanilines (o-; m- 6.1 UN1661 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
; p-;). T3, TP33
Nitroanisole, liquid 6.1 UN2730 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Nitroanisoles, solid 6.1 UN3458 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
+ Nitrobenzene........ 6.1 UN1662 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40
m-Nitrobenzene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diazonium
perchlorate.
Nitrobenzenesulfonic 8 UN2305 II 8......... B2, B4, IB8, 154........... 202........ 242........ 1 L 30 L A .......
acid. IP2, IP4, T3,
TP33
Nitrobenzol, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrobenzene.
5-Nitrobenzotriazol. 1.1D UN0385 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Nitrobenzotrifluorid 6.1 UN2306 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40
es, liquid.
Nitrobenzotrifluorid 6.1 UN3431 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
es, solid. T3, TP33
Nitrobromobenzenes, 6.1 UN2732 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
liquid.
Nitrobromobenzenes, 6.1 UN3459 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
solid. TP33
Nitrocellulose, dry 1.1D UN0340 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 13 27E
or wetted with less
than 25 percent
water (or alcohol),
by mass.
Nitrocellulose 4.1 UN3270 II 4.1....... 43, A1 151........... 212........ 240........ 1 kg 15 kg D .......
membrane filters,
with not more than
12.6% nitrogen, by
dry mass.
Nitrocellulose, 1.3C UN0343 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
plasticized with
not less than 18
percent
plasticizing
substance, by mass.
Nitrocellulose, 3 UN2059 I 3......... T11, TP1, TP8, None.......... 201........ 243........ 1 L 30 L E .......
solution, flammable TP27
with not more than
12.6 percent
nitrogen, by mass,
and not more than
55 percent
nitrocellulose.
.................... ........... .................. II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
[[Page 233]]
Nitrocellulose, 1.1D UN0341 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 13 27E
unmodified or
plasticized with
less than 18
percent
plasticizing
substance, by mass.
Nitrocellulose, 1.3C UN0342 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
wetted with not
less than 25
percent alcohol, by
mass.
Nitrocellulose with 4.1 UN2556 II 4.1....... ................ 151........... 212........ None....... 1 kg 15 kg D 28
alcohol with not
less than 25
percent alcohol by
mass, and with not
more than 12.6
percent nitrogen,
by dry mass.
Nitrocellulose, with 4.1 UN2557 II 4.1....... 44 151........... 212........ None....... 1 kg 15 kg D 28
not more than 12.6
percent nitrogen,
by dry mass, or
Nitrocellulose
mixture with
pigment or
Nitrocellulose
mixture with
plasticizer or
Nitrocellulose
mixture with
pigment and
plasticizer.
Nitrocellulose with 4.1 UN2555 II 4.1....... ................ 151........... 212........ None....... 15 kg 50 kg E 28
water with not less
than 25 percent
water, by mass.
Nitrochlorobenzene, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see
Chloronitrobenzenes
etc.
Nitrocresols, liquid 6.1 UN3434 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Nitrocresols, solid. 6.1 UN2446 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Nitroethane......... 3 UN2842 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Nitroethyl nitrate.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitroethylene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
polymer.
Nitrogen, compressed 2.2 UN1066 ....... 2.2....... ................ 306........... 302........ 314, 315... 75 kg 150 kg A .......
Nitrogen dioxide, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Dinitrogen
tetroxide.
Nitrogen fertilizer ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Fertilizer
ammoniating
solution etc.
Nitrogen, mixtures ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
with rare gases,
see Rare gases and
nitrogen mixtures.
Nitrogen peroxide, ........... .......... .............. ........... ........... ........... ........... .......
see Dinitrogen
tetroxide.
Nitrogen, 2.2 UN1977 ....... 2.2....... T75, TP5 320........... 316........ 318........ 50 kg 500 kg D .......
refrigerated liquid
cryogenic liquid.
Nitrogen tetroxide ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
and nitric oxide
mixtures, see
Nitric oxide and
nitrogen tetroxide
mixtures.
Nitrogen tetroxide, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Dinitrogen
tetroxide.
[[Page 234]]
Nitrogen trichloride Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrogen trifluoride 2.2 UN2451 ....... 2.2, 5.1.. ................ None.......... 302........ None....... 75 kg 150 kg D 40
Nitrogen triiodide.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrogen triiodide Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
monoamine.
Nitrogen trioxide... 2.3 UN2421 ....... 2.3, 5.1, 1 None.......... 336........ 245........ Forbidden Forbidden D 40, 89,
8. 90
Nitroglycerin, 1.1D UN0143 II 1.1D, 6.1. 125 None.......... 62......... None....... Forbidden Forbidden 13 21E
desensitized with
not less than 40
percent non-
volatile water
insoluble
phlegmatizer, by
mass.
Nitroglycerin, Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
liquid, not
desensitized.
Nitroglycerin 3 UN3343 ....... 3......... 129 None.......... 214........ None....... Forbidden Forbidden D .......
mixture,
desensitized,
liquid, flammable,
n.o.s. with not
more than 30
percent
nitroglycerin, by
mass.
Nitroglycerin 3 UN3357 II 3......... 142 None.......... 202........ 243........ 5 L 60 L E .......
mixture,
desensitized,
liquid, n.o.s. with
not more than 30%
nitroglycerin, by
mass.
Nitroglycerin 4.1 UN3319 II 4.1....... 118 None.......... None....... None....... Forbidden 0.5 kg E .......
mixture,
desensitized,
solid, n.o.s. with
more than 2 percent
but not more than
10 percent
nitroglycerin, by
mass.
Nitroglycerin, 3 UN3064 II 3......... N8 None.......... 202........ None....... Forbidden 5 L E .......
solution in
alcohol, with more
than 1 percent but
not more than 5
percent
nitroglycerin.
Nitroglycerin, 1.1D UN0144 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 21E
solution in
alcohol, with more
than 1 percent but
not more than 10
percent
nitrogylcerin.
Nitroglycerin 3 UN1204 II 3......... IB2, N34 150........... 202........ None....... 5 L 60 L B .......
solution in alcohol
with not more than
1 percent
nitroglycerin.
Nitroguanidine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrate.
[[Page 235]]
Nitroguanidine or 1.1D UN0282 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Picrite, dry or
wetted with less
than 20 percent
water, by mass.
Nitroguanidine, 4.1 UN1336 I 4.1....... 23, A8, A19, None.......... 211........ None....... 1 kg 15 kg E 28
wetted or Picrite, A20, N41
wetted with not
less than 20
percent water, by
mass.
1-Nitrohydantoin.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrohydrochloric 8 UN1798 I 8......... A3, B10, N41, None.......... 201........ 243........ Forbidden 2.5 L D 40, 66,
acid. T10, TP2, TP12, 74, 89,
TP13 90
Nitromannite (dry).. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitromannite, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
wetted, see
Mannitol
hexanitrate, etc.
Nitromethane........ 3 UN1261 II 3......... ................ 150........... 202........ None....... Forbidden 60 L A .......
Nitromuriatic acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see
Nitrohydrochloric
acid.
Nitronaphthalene.... 4.1 UN2538 III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
4- 4.1 UN3376 I 4.1....... 164, A8, A19, None.......... 211........ None....... Forbidden 15 kg E 36
Nitrophenylhydrazin A20, N41
e, with not less
than 30% water, by
mass.
+ Nitrophenols (o-; m- 6.1 UN1663 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
; p-;). TP33
m-Nitrophenyldinitro Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
methane.
Nitropropanes....... 3 UN2608 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
p- 4.2 UN1369 II 4.2....... A19, A20, IB6, None.......... 212........ 241........ 15 kg 50 kg D 34
Nitrosodimethylanil IP2, N34, T3,
ine. TP33
Nitrostarch, dry or 1.1D UN0146 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
wetted with less
than 20 percent
water, by mass.
Nitrostarch, wetted 4.1 UN1337 I 4.1....... 23, A8, A19, None.......... 211........ None....... 1 kg 15 kg D 28
with not less than A20, N41
20 percent water,
by mass.
Nitrosugars (dry)... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitrosyl chloride... 2.3 UN1069 ....... 2.3, 8.... 3, B14 None.......... 304........ 314, 315... Forbidden Forbidden D 40
Nitrosylsulfuric 8 UN2308 II 8......... A3, A6, A7, B2, 154........... 202........ 242........ 1 L 30 L D 40, 66,
acid, liquid. IB2, N34, T8, 74, 89,
TP2, TP12 90
Nitrosylsulphuric 8 UN3456 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg D 40, 66,
acid, solid. T3, TP33 74, 89,
90
Nitrotoluenes, 6.1 UN1664 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
liquid.
Nitrotoluenes, solid 6.1 UN3446 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Nitrotoluidines 6.1 UN2660 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
(mono). TP33
Nitrotriazolone or 1.1D UN0490 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
NTO.
[[Page 236]]
Nitrous oxide and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
carbon dioxide
mixtures, see
Carbon dioxide and
nitrous oxide
mixtures.
Nitrous oxide....... 2.2 UN1070 ....... 2.2, 5.1.. A14 306........... 304........ 314, 315... 75 kg 150 kg A 40
Nitrous oxide, 2.2 UN2201 ....... 2.2, 5.1.. B6, T75, TP5, None.......... 304........ 314, 315... Forbidden Forbidden B 40
refrigerated liquid. TP22
Nitroxylenes, liquid 6.1 UN1665 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Nitroxylenes, solid. 6.1 UN3447 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Nitroxylol, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitroxylenes.
Nonanes............. 3 UN1920 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Non-flammable gas, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
n.o.s., see
Compressed gas,
etc. or Liquefied
gas, etc.
Nonliquefied gases, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Compressed
gases, etc.
Nonliquefied ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrocarbon gas,
see Hydrocarbon gas
mixture,
compressed, n.o.s..
Nonyltrichlorosilane 8 UN1799 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
N34, T7, TP2,
TP13
Nordhausen acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Sulfuric acid,
fuming etc.
2,5-Norbornadiene, ........... .......... .............. ........... ........... ........... ........... .......
stabilized, see
Bicyclo 2,2,1 hepta-
2,5-diene,
stabilized.
Octadecyltrichlorosi 8 UN1800 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
lane. N34, T7, TP2,
TP13
Octadiene........... 3 UN2309 II 3......... B1, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
1,7-Octadine-3,5- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diyne-1,8-dimethoxy-
9-octadecynoic acid.
Octafluorobut-2-ene 2.2 UN2422 ....... 2.2....... ................ None.......... 304........ 314, 315... 75 kg 150 kg A .......
or Refrigerant gas
R 1318.
[[Page 237]]
Octafluorocyclobutan 2.2 UN1976 ....... 2.2....... T50 None.......... 304........ 314, 315... 75 kg 150 kg A .......
e, or Refrigerant
gas RC 318.
Octafluoropropaneor 2.2 UN2424 ....... 2.2....... T50 None.......... 304........ 314, 315... 75 kg 150 kg A .......
Refrigerant gas R
218.
Octanes............. 3 UN1262 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Octogen, etc. see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Cyclotetramethylene
tetranitramine,
etc..
Octolite or Octol, 1.1D UN0266 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
dry or wetted with
less than 15
percent water, by
mass.
Octonal............. 1.1D UN0496 ....... 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Octyl aldehydes..... 3 UN1191 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Octyltrichlorosilane 8 UN1801 II 8......... A7, B2, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
N34, T7, TP2,
TP13
Oil gas, compressed. 2.3 UN1071 ....... 2.3, 2.1.. 6 None.......... 304........ 314, 315... Forbidden 25 kg D 40
Oleum, see Sulfuric ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid, fuming.
Organic peroxide Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
type A, liquid or
solid.
G Organic peroxide 5.2 UN3101 II 5.2, 1.... 53 152........... 225........ None....... Forbidden Forbidden D 12, 40,
type B, liquid. 52, 53
G Organic peroxide 5.2 UN3111 II 5.2, 1.... 53 None.......... 225........ None....... Forbidden Forbidden D 2, 40,
type B, liquid, 52, 53
temperature
controlled.
G Organic peroxide 5.2 UN3102 II 5.2, 1.... 53 152........... 225........ None....... Forbidden Forbidden D 12, 40,
type B, solid. 52, 53
G Organic peroxide 5.2 UN3112 II 5.2, 1.... 53 None.......... 225........ None....... Forbidden Forbidden D 2, 40,
type B, solid, 52, 53
temperature
controlled.
G Organic peroxide 5.2 UN3103 II 5.2....... ................ 152........... 225........ None....... 5 L 10 L D 12, 40,
type C, liquid. 52, 53
G Organic peroxide 5.2 UN3113 II 5.2....... ................ None.......... 225........ None....... Forbidden Forbidden D 2, 40,
type C, liquid, 52, 53
temperature
controlled.
G Organic peroxide 5.2 UN3104 II 5.2....... ................ 152........... 225........ None....... 5 kg 10 kg D 12, 40,
type C, solid. 52, 53
G Organic peroxide 5.2 UN3114 II 5.2....... ................ None.......... 225........ None....... Forbidden Forbidden D 2, 40,
type C, solid, 52, 53
temperature
controlled.
G Organic peroxide 5.2 UN3105 II 5.2....... ................ 152........... 225........ None....... 5 L 10 L D 12, 40,
type D, liquid. 52, 53
G Organic peroxide 5.2 UN3115 II 5.2....... ................ None.......... 225........ None....... Forbidden Forbidden D 2, 40,
type D, liquid, 52, 53
temperature
controlled.
G Organic peroxide 5.2 UN3106 II 5.2....... ................ 152........... 225........ None....... 5 kg 10 kg D 12, 40,
type D, solid. 52, 53
G Organic peroxide 5.2 UN3116 II 5.2....... ................ None.......... 225........ None....... Forbidden Forbidden D 2, 40,
type D, solid, 52, 53
temperature
controlled.
G Organic peroxide 5.2 UN3107 II 5.2....... ................ 152........... 225........ None....... 10 L 25 L D 12, 40,
type E, liquid. 52, 53
G Organic peroxide 5.2 UN3117 II 5.2....... ................ None.......... 225........ None....... Forbidden Forbidden D 2, 40,
type E, liquid, 52, 53
temperature
controlled.
[[Page 238]]
G Organic peroxide 5.2 UN3108 II 5.2....... ................ 152........... 225........ None....... 10 kg 25 kg D 12, 40,
type E, solid. 52, 53
G Organic peroxide 5.2 UN3118 II 5.2....... ................ None.......... 225........ None....... Forbidden Forbidden D 2, 40,
type E, solid, 52, 53
temperature
controlled.
G Organic peroxide 5.2 UN3109 II 5.2....... IP5 152........... 225........ 225........ 10 L 25 L D 12, 40,
type F, liquid. 52, 53
G Organic peroxide 5.2 UN3119 II 5.2....... IP5 None.......... 225........ 225........ Forbidden Forbidden D 2, 40,
type F, liquid, 52, 53
temperature
controlled.
G Organic peroxide 5.2 UN3110 II 5.2....... TP33 152........... 225........ 225........ 10 kg 25 kg D 12, 40,
type F, solid. 52, 53
G Organic peroxide 5.2 UN3120 II 5.2....... TP33 None.......... 225........ 225........ Forbidden Forbidden D 2, 52,
type F, solid, 53
temperature
controlled.
D Organic phosphate, 2.3 NA1955 ....... 2.3....... 3 None.......... 334........ None....... Forbidden Forbidden D 40
mixed with
compressed gas or
Organic phosphate
compound, mixed
with compressed gas
or Organic
phosphorus
compound, mixed
with compressed gas.
Organic pigments, 4.2 UN3313 II 4.2....... IB8, IP2, IP4, None.......... 212........ 241........ 15 kg 50 kg C .......
self-heating. T3, TP33
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg C .......
TP33
G Organoarsenic 6.1 UN3280 I 6.1....... 5, T14, TP2, None.......... 211........ 242........ 1 L 30 L B .......
compound, liquid, TP13, TP27
n.o.s.
II 6.1....... IB2, T11, TP2, 153........... 212........ 242........ 5 L 60 L B .......
TP27
III 6.1....... IB3, T7, TP1, 153........... 213........ 240........ 60 L 220 L A .......
TP28
G Organoarsenic 6.1 UN3465 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg B .......
compound, solid, TP33
n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Organochlorine 3 UN2762 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticides liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
[[Page 239]]
Organochlorine 6.1 UN2996 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Organochlorine 6.1 UN2995 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, 153........... 203........ 242........ 60 L 220 L A 40
TP2, TP28
Organochlorine 6.1 UN2761 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
G Organometallic 6.1 UN3282 I 6.1....... T14, TP2, TP13, None.......... 211........ 242........ 1 L 30 L B .......
compound, toxic, TP27
liquid, n.o.s.
II 6.1....... IB2, T11, TP2, 153........... 212........ 242........ 5 L 60 L B .......
TP27
III 6.1....... IB3, T7, TP1, 153........... 213........ 240........ 60 L 220 L A .......
TP28
G Organometallic 6.1 UN3467 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg B .......
compound, toxic, TP33
solid, n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
G Organometallic 4.2 UN3392 I 4.2....... B11, T21, TP2, None.......... 181........ 244........ Forbidden Forbidden D 143
substance, liquid, TP7
pyrophoric.
G Organometallic 4.2 UN3394 I 4.2, 4.3.. B11, T21, TP2, None.......... 181........ 244........ Forbidden Forbidden D .......
substance, liquid, TP7
pyrophoric, water-
reactive.
G Organometallic 4.3 UN3398 I 4.3....... T13, TP2, TP7 None.......... 201........ 244........ Forbidden 1 L E 40, 52
substance, liquid,
water-reactive.
II 4.3....... IB1, T7, TP2, None.......... 202........ 243........ 1 L 5 L E 40, 52
TP7
III 4.3....... IB2, T7, TP2, None.......... 203........ 242........ 5 L 60 L E 40, 52
TP7
G Organometallic 4.3 UN3399 I 4.3, 3.... T13, TP2, TP7 None.......... 201........ 244........ Forbidden 1 L E 40, 52
substance, liquid,
water-reactive,
flammable.
II 4.3, 3.... IB1, IP2, T7, None.......... 202........ 243........ 1 L 5 L E 40, 52
TP2, TP7
III 4.3, 3.... IB2, IP4, T7, None.......... 203........ 242........ 5 L 60 L E 40, 52
TP2, TP7
G Organometallic 4.2 UN3391 I 4.2....... T21, TP7, TP33 None.......... 181........ 244........ Forbidden Forbidden D .......
substance, solid,
pyrophoric.
[[Page 240]]
G Organometallic 4.2 UN3393 I 4.2, 4.3.. B11, T21, TP7, None.......... 181........ 244........ Forbidden Forbidden D 52
substance, solid, TP33
pyrophoric, water-
reactive.
G Organometallic 4.2 UN3400 II 4.2....... IB6, T3, TP33 None.......... 212........ 242........ 15 kg 50 kg C .......
substance, solid,
self-heating.
.................... ........... .................. III 4.2....... IB8, T1, TP33 None.......... 203........ 242........ 25 kg 100 kg C .......
G Organometallic 4.3 UN3395 I 4.3....... N40, T9, TP7, None.......... 211........ 242........ Forbidden Forbidden E 40, 52
substance, solid, TP33
water-reactive.
.................... ........... .................. II 4.3....... IB4, T3, TP33 151........... 212........ 242........ 15 kg 50 kg E 40, 52
.................... ........... .................. III 4.3....... IB6, T1, TP33 151........... 213........ 241........ 25 kg 100 kg E 40, 52
G Organometallic 4.3 UN3396 I 4.3, 4.1.. N40, T9, TP7, None.......... 211........ 242........ Forbidden Forbidden E 40, 52
substance, solid, TP33
water-reactive,
flammable.
.................... ........... .................. II 4.3, 4.1.. IB4, T3, TP33 151........... 212........ 242........ 15 kg 50 kg E 40, 52
.................... ........... .................. III 4.3, 4.1.. IB6, T1, TP33 151........... 213........ 241........ 25 kg 100 kg E 40, 52
G Organometallic 4.3 UN3397 I 4.3, 4.2.. N40, T9, TP7, None.......... 211........ 242........ Forbidden Forbidden E 40, 52
substance, solid, TP33
water-reactive,
self-heating.
.................... ........... .................. II 4.3, 4.2.. IB4, T3, TP33 None.......... 212........ 242........ 15 kg 50 kg E 40, 52
.................... ........... .................. III 4.3, 4.2.. IB6, T1, TP33 None.......... 213........ 241........ 25 kg 100 kg E 40, 52
Organophosphorus 6.1 UN3279 I 6.1, 3.... 5, T14, TP2, None.......... 201........ 243........ 1 L 30 L B 40
compound, toxic, TP13, TP27
flammable, n.o.s..
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
G Organophosphorus 6.1 UN3278 I 6.1....... 5, T14, TP2, None.......... 201........ 243........ 1 L 30 L B .......
compound, toxic, TP13, TP27
liquid, n.o.s..
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B .......
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A .......
TP28
G Organophosphorus 6.1 UN3464 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg B .......
compound, toxic, TP33
solid, n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
[[Page 241]]
Organophosphorus 3 UN2784 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticides, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Organophosphorus 6.1 UN3018 I 6.1....... N76, T14, TP2, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP13, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, N76, T11, 153........... 202........ 243........ 5 L 60 L B 40
TP2, TP13, TP27
.................... ........... .................. III 6.1....... IB3, N76, T7, 153........... 203........ 241........ 60 L 220 L A 40
TP2, TP28
Organophosphorus 6.1 UN3017 I 6.1, 3.... N76, T14, TP2, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP13, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, N76, T11, 153........... 202........ 243........ 5 L 60 L B 40
TP2, TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, N76, 153........... 203........ 242........ 60 L 220 L A 40
T7, TP2, TP28
Organophosphorus 6.1 UN2783 I 6.1....... IB7, IP1, N77, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, T6, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
N77, T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, N77, 153........... 213........ 240........ 100 kg 200 kg A 40
T1, TP33
Organotin compounds, 6.1 UN2788 I 6.1....... A3, N33, N34, None.......... 201........ 243........ 1 L 30 L B 40
liquid, n.o.s.. T14, TP2, TP13,
TP27
.................... ........... .................. II 6.1....... A3, IB2, N33, 153........... 202........ 243........ 5 L 60 L A 40
N34, T11, TP2,
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Organotin compounds, 6.1 UN3146 I 6.1....... A5, IB7, IP1, None.......... 211........ 242........ 5 kg 50 kg B 40
solid, n.o.s.. T6, TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Organotin 3 UN2787 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticides, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Organotin 6.1 UN3020 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
[[Page 242]]
Organotin 6.1 UN3019 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, 153........... 203........ 242........ 60 L 220 L A 40
TP2, TP28
Organotin 6.1 UN2786 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Orthonitroaniline, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Nitroanilines
etc.
Osmium tetroxide.... 6.1 UN2471 I 6.1....... A8, IB7, IP1, None.......... 211........ 242........ 5 kg 50 kg B 40
N33, N34, T6,
TP33
D G Other regulated 9 NA3082 III 9......... IB3, T2, TP1 155........... 203........ 241........ No limit No limit A .......
substances, liquid,
n.o.s..
D G Other regulated 9 NA3077 III 9......... B54, IB8, IP2, 155........... 213........ 240........ No limit No limit A .......
substances, solid, T1, TP33
n.o.s..
G Oxidizing liquid, 5.1 UN3098 I 5.1, 8.... A6 None.......... 201........ 244........ Forbidden 2.5 L D 13, 56,
corrosive, n.o.s.. 58,
106,
138
.................... ........... .................. II 5.1, 8.... IB1 None.......... 202........ 243........ 1 L 5 L B 34, 56,
58,
106,
138
.................... ........... .................. III 5.1, 8.... IB2 152........... 203........ 242........ 2.5 L 30 L B 34, 56,
58,
106,
138
G Oxidizing liquid, 5.1 UN3139 I 5.1....... 127, A2, A6 None.......... 201........ 243........ Forbidden 2.5 L D 56, 58,
n.o.s.. 106,
138
[[Page 243]]
.................... ........... .................. II 5.1....... 127, A2, IB2 152........... 202........ 242........ 1 L 5 L B 56, 58,
106,
138
.................... ........... .................. III 5.1....... 127, A2, IB2 152........... 203........ 241........ 2.5 L 30 L B 56, 58,
106,
138
G Oxidizing liquid, 5.1 UN3099 I 5.1, 6.1.. A6 None.......... 201........ 244........ Forbidden 2.5 L D 56, 58,
toxic, n.o.s.. 106,
138
.................... ........... .................. II 5.1, 6.1.. IB1 152........... 202........ 243........ 1 L 5 L B 56, 58,
95,
106,
138
.................... ........... .................. III 5.1, 6.1.. IB2 152........... 203........ 242........ 2.5 L 30 L B 56, 58,
95,
106,
138
G Oxidizing solid, 5.1 UN3085 I 5.1, 8.... ................ None.......... 211........ 242........ 1 kg 15 kg D 13, 56,
corrosive, n.o.s.. 58,
106,
138
.................... ........... .................. II 5.1, 8.... IB6, IP2, T3, None.......... 212........ 242........ 5 kg 25 kg B 13, 34,
TP33 56, 58,
106,
138
.................... ........... .................. III 5.1, 8.... IB8, IP3, T1, 152........... 213........ 240........ 25 kg 100 kg B 13, 34,
TP33 56, 58,
106,
138
G Oxidizing solid, 5.1 UN3137 I 5.1, 4.1.. ................ None.......... 214........ 214........ Forbidden Forbidden ............ .......
flammable, n.o.s..
G Oxidizing solid, 5.1 UN1479 I 5.1....... IB5, IP1 None.......... 211........ 242........ 1 kg 15 kg D 56, 58,
n.o.s.. 106,
138
.................... ........... .................. II 5.1....... IB8, IP2, IP4, 152........... 212........ 240........ 5 kg 25 kg B 56, 58,
T3, TP33 106,
138
.................... ........... .................. III 5.1....... IB8, IP3, T1, 152........... 213........ 240........ 25 kg 100 kg B 56, 58,
TP33 106,
138
G Oxidizing solid, 5.1 UN3100 I 5.1, 4.2.. ................ None.......... 214........ 214........ Forbidden Forbidden ............ .......
self-heating,
n.o.s..
.................... ........... .................. II 5.1, 4.2.. ................ None.......... 214........ 214........ Forbidden Forbidden ............ .......
G Oxidizing solid, 5.1 UN3087 I 5.1, 6.1.. ................ None.......... 211........ 242........ 1 kg 15 kg D 56, 58,
toxic, n.o.s.. 106,
138
[[Page 244]]
.................... ........... .................. II 5.1, 6.1.. IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg B 56, 58,
TP33 95,
106,
138
.................... ........... .................. III 5.1, 6.1.. IB8, IP3, T1, 152........... 213........ 240........ 25 kg 100 kg B 56, 58,
TP33 95,
106,
138
G Oxidizing solid, 5.1 UN3121 ....... 5.1, 4.3.. ................ None.......... 214........ 214........ Forbidden Forbidden ............ .......
water-reactive,
n.o.s..
Oxygen and carbon ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dioxide mixtures,
see Carbon dioxide
and oxygen mixtures.
Oxygen, compressed.. 2.2 UN1072 ....... 2.2, 5.1.. A14, A52 306........... 302........ 314, 315... 75 kg 150 kg A .......
Oxygen difluoride, 2.3 UN2190 ....... 2.3, 5.1, 1 None.......... 304........ None....... Forbidden Forbidden D 13, 40,
compressed. 8. 89, 90
Oxygen generator, 5.1 UN3356 II 5.1....... 60, A51 None.......... 212........ None....... Forbidden 25 kg gross D 56, 58,
chemical (including 69, 106
when contained in
associated
equipment, e.g.,
passenger service
units (PSUs),
portable breathing
equipment (PBE),
etc)..
+ Oxygen generator, 9 NA3356 III 9......... 61 None.......... 213........ None....... Forbidden Forbidden A .......
chemical, spent.
Oxygen, mixtures ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
with rare gases,
see Rare gases and
oxygen mixtures.
Oxygen, refrigerated 2.2 UN1073 ....... 2.2, 5.1.. T75, TP5, TP22 320........... 316........ 318........ Forbidden Forbidden D .......
liquid (cryogenic
liquid).
Paint including 3 UN1263 I 3......... T11, TP1, TP8 150........... 201........ 243........ 1 L 30 L E .......
paint, lacquer,
enamel, stain,
shellac solutions,
varnish, polish,
liquid filler, and
liquid lacquer base.
.................... ........... .................. II 3......... 149, B52, IB2, 150........... 173........ 242........ 5 L 60 L B .......
T4, TP1, TP8
.................... ........... .................. III 3......... B1, B52, IB3, 150........... 173........ 242........ 60 L 220 L A .......
T2, TP1
[[Page 245]]
Paint or Paint 8 UN3066 II 8......... B2, IB2, T7, TP2 154........... 173........ 242........ 1 L 30 L A .......
related material.
.................... ........... .................. III 8......... B52, IB3, T4, 154........... 173........ 241........ 5 L 60 L A .......
TP1
Paint related 3 UN1263 I 3......... T11, TP1, TP8 150........... 201........ 243........ 1 L 30 L E .......
material including
paint thinning,
drying, removing,
or reducing
compound.
.................... ........... .................. II 3......... 149, B52, IB2, 150........... 173........ 242........ 5 L 60 L B .......
T4, TP1, TP8
.................... ........... .................. III 3......... B1, B52, IB3, 150........... 173........ 242........ 60 L 220 L A .......
T2, TP1
Paper, unsaturated 4.2 UN1379 III 4.2....... IB8, IP3 None.......... 213........ 241........ Forbidden Forbidden A .......
oil treated
incompletely dried
(including carbon
paper).
Paraformaldehyde.... 4.1 UN2213 III 4.1....... A1, IB8, IP3, 151........... 213........ 240........ 25 kg 100 kg A .......
T1, TP33
Paraldehyde......... 3 UN1264 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Paranitroaniline, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solid, see
Nitroanilines etc.
D Parathion and 2.3 NA1967 ....... 2.3....... 3 None.......... 334........ 245........ Forbidden Forbidden E 40
compressed gas
mixture.
Paris green, solid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Copper
acetoarsenite.
A W PCB, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Polychlorinated
biphenyls.
+ Pentaborane......... 4.2 UN1380 I 4.2, 6.1.. 1 None.......... 205........ 245........ Forbidden Forbidden D .......
Pentachloroethane... 6.1 UN1669 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40
Pentachlorophenol... 6.1 UN3155 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Pentaerythrite Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetranitrate (dry).
Pentaerythrite 4.1 UN3344 II 4.1....... 118, N85 None.......... 214........ None....... Forbidden Forbidden E .......
tetranitrate
mixture,
desensitized,
solid, n.o.s. with
more than 10
percent but not
more than 20
percent PETN, by
mass.
Pentaerythrite 1.1D UN0411 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
tetranitrate or
Pentaerythritol
tetranitrate or
PETN, with not less
than 7 percent wax
by mass.
Pentaerythrite 1.1D UN0150 II 1.1D...... 121 None.......... 62......... None....... Forbidden Forbidden 10 .......
tetranitrate,
wetted or
Pentaerythritol
tetranitrate,
wetted, or PETN,
wetted with not
less than 25
percent water, by
mass, or
Pentaerythrite
tetranitrate, or
Pentaerythritol
tetranitrate or
PETN, desensitized
with not less than
15 percent
phlegmatizer by
mass.
[[Page 246]]
Pentaerythritol ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
tetranitrate, see
Pentaerythrite
tetranitrate, etc.
Pentafluoroethane or 2.2 UN3220 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
Refrigerant gas R
125.
Pentamethylheptane.. 3 UN2286 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Pentane-2,4-dione... 3 UN2310 III 3, 6.1.... B1, IB3, T4, TP1 150........... 203........ 242........ 60 L 220 L A .......
Pentanes............ 3 UN1265 I 3......... T11, TP2 150........... 201........ 243........ 1 L 30 L E .......
.................... ........... .................. II 3......... IB2, IP8, T4, 150........... 202........ 242........ 5 L 60 L E .......
TP1
Pentanitroaniline Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Pentanols........... 3 UN1105 II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP29
.................... ........... .................. III 3......... B1, B3, IB3, T2, 150........... 203........ 242........ 60 L 220 L A .......
TP1
1-Pentene (n- 3 UN1108 I 3......... T11, TP2 150........... 201........ 243........ 1 L 30 L E .......
amylene).
1-Pentol............ 8 UN2705 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L B 26, 27
Pentolite, dry or 1.1D UN0151 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
wetted with less
than 15 percent
water, by mass.
Pepper spray, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Aerosols, etc. or
Self-defense spray,
non-pressurized.
Perchlorates, 5.1 UN3211 II 5.1....... IB2, T4, TP1 152........... 202........ 242........ 1 L 5 L B 56, 58,
inorganic, aqueous 133
solution, n.o.s..
.................... ........... .................. III 5.1....... IB2, T4, TP1 152........... 202........ 241........ 2.5 L 30 L B 56, 58,
69, 133
Perchlorates, 5.1 UN1481 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
inorganic, n.o.s.. TP33
.................... ........... .................. III 5.1....... IB8, IP3, T1, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
TP33
Perchloric acid, Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
with more than 72
percent acid by
mass.
Perchloric acid with 5.1 UN1873 I 5.1, 8.... A2, A3, N41, None.......... 201........ 243........ Forbidden 2.5 L D 66
more than 50 T10, TP1, TP12
percent but not
more than 72
percent acid, by
mass.
Perchloric acid with 8 UN1802 II 8, 5.1.... IB2, N41, T7, None.......... 202........ 243........ Forbidden 30 L C 66
not more than 50 TP2
percent acid by
mass.
Perchloroethylene, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see
Tetrachloroethylene.
[[Page 247]]
Perchloromethyl 6.1 UN1670 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
mercaptan. B74, N34, T20,
TP2, TP13, TP38,
TP45
Perchloryl fluoride. 2.3 UN3083 ....... 2.3, 5.1.. 2, B9, B14 None.......... 302........ 314, 315... Forbidden Forbidden D 40
Percussion caps, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Primers, cap type.
Perfluoro-2-butene, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Octafluorobut-2-
ene.
Perfluoro(ethyl 2.1 UN3154 ....... 2.1....... ................ 306........... 302, 304, 314, 315... Forbidden 150 kg E 40
vinyl ether). 305.
Perfluoro(methyl 2.1 UN3153 ....... 2.1....... T50 306........... 302, 304, 314, 315... Forbidden 150 kg E 40
vinyl ether). 305.
Perfumery products 3 UN1266 II 3......... 149, IB2, T4, 150........... 202........ 242........ 15 L 60 L B .......
with flammable TP1, TP8
solvents.
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Permanganates, 5.1 UN3214 II 5.1....... 26, IB2, T4, TP1 152........... 202........ 242........ 1 L 5 L D 56, 58,
inorganic, aqueous 133,
solution, n.o.s.. 138
Permanganates, 5.1 UN1482 II 5.1....... 26, A30, IB6, 152........... 212........ 242........ 5 kg 25 kg D 56, 58,
inorganic, n.o.s.. IP2, T3, TP33 138
.................... ........... .................. III 5.1....... 26, A30, IB8, 152........... 213........ 240........ 25 kg 100 kg D 56, 58,
IP3, T1, TP33 138
Peroxides, 5.1 UN1483 II 5.1....... A7, A20, IB6, None.......... 212........ 242........ 5 kg 25 kg A 13, 52,
inorganic, n.o.s.. IP2, N34, T3, 66, 75
TP33
.................... ........... .................. III 5.1....... A7, A20, IB8, 152........... 213........ 240........ 25 kg 100 kg A 13, 52,
IP3, N34, T1, 66, 75
TP33
Peroxyacetic acid, Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
with more than 43
percent and with
more than 6 percent
hydrogen peroxide.
Persulfates, 5.1 UN3216 III 5.1....... IB2, T4, TP1, 152........... 203........ 241........ 2.5 L 30 L A 56, 133
inorganic, aqueous TP29
solution, n.o.s..
Persulfates, 5.1 UN3215 III 5.1....... IB8, IP3, T1, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
inorganic, n.o.s.. TP33
G Pesticides, liquid, 3 UN3021 I 3, 6.1.... B5, T14, TP2, None.......... 201........ 243........ Forbidden 30 L B .......
flammable, toxic, TP13, TP27
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B .......
TP13, TP27
G Pesticides, liquid, 6.1 UN2903 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
toxic, flammable, TP27
n.o.s. flash point
not less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
[[Page 248]]
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, TP2 153........... 203........ 242........ 60 L 220 L A 40
G Pesticides, liquid, 6.1 UN2902 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
toxic, n.o.s.. TP27
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
G Pesticides, solid, 6.1 UN2588 I 6.1....... IB7, T6, TP33 None.......... 211........ 242........ 5 kg 50 kg A 40
toxic, n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
PETN, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Pentaerythrite
tetranitrate.
PETN/TNT, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Pentolite, etc.
Petrol, see Gasoline ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Petroleum crude oil. 3 UN1267 I 3......... 144, T11, TP1, 150........... 201........ 243........ 1 L 30 L E .......
TP8
.................... ........... .................. II 3......... 144, IB2, T4, 150........... 202........ 242........ 5 L 60 L B .......
TP1, TP8
.................... ........... .................. III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T2, TP1
Petroleum 3 UN1268 I 3......... 144, T11, TP1, 150........... 201........ 243........ 1 L 30 L E .......
distillates, n.o.s. TP8
or Petroleum
products, n.o.s..
.................... ........... .................. II 3......... 144, IB2, T7, 150........... 202........ 242........ 5 L 60 L B .......
TP1, TP8, TP28
.................... ........... .................. III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T4, TP1, TP29
Petroleum gases, 2.1 UN1075 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
liquefied or
Liquefied petroleum
gas.
D Petroleum oil....... 3 NA1270 I 3......... 144, T11, TP1 None.......... 201........ 243........ 1 L 30 L E .......
.................... ........... .................. II 3......... 144, IB2, T7, 150........... 202........ 242........ 5 L 60 L B .......
TP1, TP8, TP28
.................... ........... .................. III 3......... 144, B1, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T4, TP1, TP29
Phenacyl bromide.... 6.1 UN2645 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B 40
T3, TP33
+ Phenetidines........ 6.1 UN2311 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Phenol, molten...... 6.1 UN2312 II 6.1....... B14, T7, TP3 None.......... 202........ 243........ Forbidden Forbidden B 40
[[Page 249]]
+ Phenol, solid....... 6.1 UN1671 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
N78, T3, TP33
Phenol solutions.... 6.1 UN2821 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
.................... ........... .................. III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Phenolsulfonic acid, 8 UN1803 II 8......... B2, IB2, N41, 154........... 202........ 242........ 1 L 30 L C 14
liquid. T7, TP2
Phenoxyacetic acid 3 UN3346 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
derivative TP27
pesticide, liquid,
flammable, toxic
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Phenoxyacetic acid 6.1 UN3348 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
derivative TP27
pesticide, liquid,
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Phenoxyacetic acid 6.1 UN3347 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
derivative TP27
pesticide, liquid,
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Phenoxyacetic acid 6.1 UN3345 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
derivative TP33
pesticide, solid,
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Phenyl chloroformate 6.1 UN2746 II 6.1, 8.... IB2, T7, TP2, 153........... 202........ 243........ 1 L 30 L A 12, 13,
TP13 21, 25,
40, 100
Phenyl isocyanate... 6.1 UN2487 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
B74, B77, N33,
N34, T20, TP2,
TP13, TP38, TP45
Phenyl mercaptan.... 6.1 UN2337 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden B 40, 52
B74, B77, T20,
TP2, TP13, TP38,
TP45
Phenyl phosphorus 8 UN2798 II 8......... B2, B15, IB2, 154........... 202........ 242........ Forbidden 30 L B 40
dichloride. T7, TP2
Phenyl phosphorus 8 UN2799 II 8......... B2, B15, IB2, 154........... 202........ 242........ Forbidden 30 L B 40
thiodichloride. T7, TP2
Phenyl urea 6.1 UN3002 I 6.1....... T14, TP2 TP27 None.......... 201........ 243........ 1 L 30 L B 40
pesticides, liquid,
toxic.
[[Page 250]]
II 6.1....... T7, TP2 None.......... 202........ 243........ 5 L 60 L B 40
III 6.1....... T4, TP1 153........... 203........ 241........ 60 L 220 L A 40
Phenylacetonitrile, 6.1 UN2470 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 52
liquid.
Phenylacetyl 8 UN2577 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L C 40
chloride.
Phenylcarbylamine 6.1 UN1672 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
chloride. B74, T20, TP2,
TP13, TP38, TP45
m-Phenylene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diaminediperchlorat
e (dry).
+ Phenylenediamines (o- 6.1 UN1673 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
; m-; p-;). TP33
Phenylhydrazine..... 6.1 UN2572 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40
Phenylmercuric 6.1 UN1674 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
acetate. T3, TP33
Phenylmercuric 6.1 UN2026 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A .......
compounds, n.o.s.. TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Phenylmercuric 6.1 UN1894 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
hydroxide. T3, TP33
Phenylmercuric 6.1 UN1895 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
nitrate. T3, TP33
Phenyltrichlorosilan 8 UN1804 II 8......... A7, B6, IB2, None.......... 202........ 242........ Forbidden 30 L C 40
e. N34, T7, TP2
Phosgene............ 2.3 UN1076 ....... 2.3, 8.... 1, B7, B46 None.......... 192........ 314........ Forbidden Forbidden D 40
9- 4.2 UN2940 II 4.2....... A19, IB6, IP2, None.......... 212........ 241........ 15 kg 50 kg A .......
Phosphabicyclononan T3, TP33
es or
Cyclooctadiene
phosphines.
Phosphine........... 2.3 UN2199 ....... 2.3, 2.1.. 1 None.......... 192........ 245........ Forbidden Forbidden D 40
Phosphoric acid 8 UN1805 III 8......... A7, IB3, N34, 154........... 203........ 241........ 5 L 60 L A .......
solution. T4, TP1
Phosphoric acid, 8 UN3453 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
solid. TP33
[[Page 251]]
Phosphoric acid ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
triethyleneimine,
see Tris-(1-
aziridiyl)phosphine
oxide, solution.
Phosphoric ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
anhydride, see
Phosphorus
pentoxide.
Phosphorous acid.... 8 UN2834 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 48
TP33
Phosphorus, 4.1 UN1338 III 4.1....... A1, A19, B1, B9, None.......... 213........ 243........ 25 kg 100 kg A 74
amorphous. B26, IB8, IP3,
T1, TP33
Phosphorus bromide, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Phosphorus
tribromide.
Phosphorus chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Phosphorus
trichloride.
Phosphorus 4.1 UN1339 II 4.1....... A20, IB4, N34, None.......... 212........ 240........ 15 kg 50 kg B 74
heptasulfide, free T3, TP33
from yellow or
white phosphorus.
Phosphorus 8 UN1939 II 8......... B8, IB8, IP2, None.......... 212........ 240........ Forbidden 50 kg C 12, 40
oxybromide. IP4, N41, N43,
T3, TP33
Phosphorus 8 UN2576 II 8......... B2, B8, IB1, None.......... 202........ 242........ Forbidden Forbidden C 40
oxybromide, molten. N41, N43, T7,
TP3, TP13
+ Phosphorus 8 UN1810 II 8, 6.1.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden C 40
oxychloride. B74, B77, N34,
T20, TP2, TP38,
TP45
Phosphorus 8 UN2691 II 8......... A7, IB8, IP2, 154........... 212........ 240........ Forbidden 50 kg B 12, 40,
pentabromide. IP4, N34, T3, 53, 55
TP33
Phosphorus 8 UN1806 II 8......... A7, IB8, IP2, None.......... 212........ 240........ Forbidden 50 kg C 40, 44,
pentachloride. IP4, N34, T3, 89,
TP33 100,
141
Phosphorus 2.3 UN2198 ....... 2.3, 8.... 2, B9, B14 None.......... 302, 304... 314, 315... Forbidden Forbidden D 40
Pentafluoride.
Phosphorus 4.3 UN1340 II 4.3, 4.1.. A20, B59, IB4, 151........... 212........ 242........ 15 kg 50 kg B 74
pentasulfide, free T3, TP33
from yellow or
white phosphorus.
Phosphorus pentoxide 8 UN1807 II 8......... A7, IB8, IP2, 154........... 212........ 240........ 15 kg 50 kg A .......
IP4, N34, T3,
TP33
Phosphorus 4.1 UN1341 II 4.1....... A20, IB4, N34, None.......... 212........ 240........ 15 kg 50 kg B 74
sesquisulfide, free T3, TP33
from yellow or
white phosphorus.
Phosphorus 8 UN1808 II 8......... A3, A6, A7, B2, None.......... 202........ 242........ Forbidden 30 L C 40
tribromide. B25, IB2, N34,
N43, T7, TP2
[[Page 252]]
Phosphorus 6.1 UN1809 I 6.1, 8.... 2, B9, B14, B15, None.......... 227........ 244........ Forbidden Forbidden C 40
trichloride. B32, B74, B77,
N34, T20, TP2,
TP13, TP38, TP45
Phosphorus trioxide. 8 UN2578 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 12
TP33
Phosphorus 4.1 UN1343 II 4.1....... A20, IB4, N34, None.......... 212........ 240........ 15 kg 50 kg B 74
trisulfide, free T3, TP33
from yellow or
white phosphorus.
Phosphorus, white 4.2 UN1381 I 4.2, 6.1.. B9, B26, N34, None.......... 188........ 243........ Forbidden Forbidden E .......
dry or Phosphorus, T9, TP3, TP31
white, under water
or Phosphorus
white, in solution
or Phosphorus,
yellow dry or
Phosphorus, yellow,
under water or
Phosphorus, yellow,
in solution.
Phosphorus white, 4.2 UN2447 I 4.2, 6.1.. B9, B26, N34, None.......... 188........ 243........ Forbidden Forbidden D .......
molten. T21, TP3, TP7,
TP26
Phosphorus (white or Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
red) and a
chlorate, mixtures
of.
Phosphoryl chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Phosphorus
oxychloride.
Phthalic anhydride 8 UN2214 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
with more than .05 TP33
percent maleic
anhydride.
Picolines........... 3 UN2313 III 3......... B1, IB3, T4, TP1 150........... 203........ 242........ 60 L 220 L A 40
Picric acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitrophenol, etc.
Picrite, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Nitroguanidine, etc.
Picryl chloride, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitrochlorobenze
ne.
Pine oil............ 3 UN1272 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
alpha-Pinene........ 3 UN2368 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Piperazine.......... 8 UN2579 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 12, 52
TP33
Piperidine.......... 8 UN2401 I 8, 3...... A10, T10, TP2 None.......... 201........ 243........ 0.5 L 2.5 L B 52
Pivaloyl chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Trimethylacetyl
chloride.
[[Page 253]]
Plastic molding 9 UN3314 III 9......... 32, IB8, IP3, 155........... 221........ 221........ 100 kg 200 kg A 85, 87
compound in dough, IP7
sheet or extruded
rope form evolving
flammable vapor.
Plastic solvent, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
n.o.s., see
Flammable liquids,
n.o.s..
Plastics, 4.2 UN2006 III 4.2....... ................ None.......... 213........ None....... Forbidden Forbidden C .......
nitrocellulose-
based, self-
heating, n.o.s..
Poisonous gases, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
n.o.s., see
Compressed or
liquefied gases,
flammable or toxic,
n.o.s..
Polyalkylamines, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
n.o.s., see Amines,
etc.
Polychlorinated 9 UN2315 II 9......... 9, 81, 140, IB3, 155........... 202........ 241........ 100 L 220 L A 95
biphenyls, liquid. T4, TP1
Polychlorinated 9 UN3432 II 9......... 9, 81, 140, IB8, 155........... 212........ 240........ 100 kg 200 kg A 95
biphenyls, solid. T3, TP33
Polyester resin kit. 3 UN3269 ....... 3......... 40, 149 152........... 225........ None....... 5 kg 5 kg B .......
Polyhalogenated 9 UN3151 II 9......... IB2 155........... 204........ 241........ 100 L 220 L A 95
biphenyls, liquid
or Polyhalogenated
terphenyls liquid.
Polyhalogenated 9 UN3152 II 9......... IB8, IP2, IP4, 155........... 204........ 241........ 100 kg 200 kg A 95
biphenyls, solid or T3, TP33
Polyhalogenated
terphenyls, solid.
Polymeric beads, 9 UN2211 III 9......... 32, IB8, IP3, 155........... 221........ 221........ 100 kg 200 kg A 85, 87
expandable, IP7, T1, TP33
evolving flammable
vapor.
Potassium........... 4.3 UN2257 I 4.3....... A7, A19, A20, None.......... 211........ 244........ Forbidden 15 kg D 52
B27, IB4, IP1,
N6, N34, T9,
TP7, TP33
Potassium arsenate.. 6.1 UN1677 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Potassium arsenite.. 6.1 UN1678 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Potassium bisulfite ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Bisulfites, aqueous
solutions, n.o.s..
Potassium 4.3 UN1870 I 4.3....... A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 52
borohydride.
Potassium bromate... 5.1 UN1484 II 5.1....... IB8, IP4, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
TP33
Potassium carbonyl.. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Potassium chlorate.. 5.1 UN1485 II 5.1....... A9, IB8, IP4, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
N34, T3, TP33
Potassium chlorate, 5.1 UN2427 II 5.1....... A2, IB2, T4, TP1 152........... 202........ 241........ 1 L 5 L B 56, 58,
aqueous solution. 133
.................... ........... .................. III 5.1....... A2, IB2, T4, TP1 152........... 203........ 241........ 2.5 L 30 L B 56, 58,
69, 133
[[Page 254]]
Potassium chlorate ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixed with mineral
oil, see Explosive,
blasting, type C.
Potassium 6.1 UN1679 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 52
cuprocyanide. T3, TP33
Potassium cyanide, 6.1 UN1680 I 6.1....... B69, B77, IB7, None.......... 211........ 242........ 5 kg 50 kg B 52
solid. IP1, N74, N75,
T6, TP33
Potassium cyanide 6.1 UN3413 I 6.1....... B69, B77, N74, None.......... 201........ 243........ 1 L 30 L B 52
solution. N75, T14, TP2,
TP13
.................... ........... .................. II 6.1....... B69, B77, IB2, 153........... 202........ 243........ 5 L 60 L B 52
N74, N75, T11,
TP2, TP13, TP27
.................... ........... .................. III 6.1....... B69, B77, IB3, 153........... 203........ 241........ 60 L 220 L A 52
N74, N75, T7,
TP2, TP13, TP28
Potassium dichloro ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
isocyanurate or
Potassium dichloro-
s-triazinetrione,
see
Dichloroisocyanuric
acid, dry or
Dichloroisocyanuric
acid salts etc.
Potassium dithionite 4.2 UN1929 II 4.2....... A8, A19, A20, None.......... 212........ 241........ 15 kg 50 kg E 13
or Potassium IB6, IP2, T3,
hydrosulfite. TP33
Potassium fluoride, 6.1 UN1812 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
solid. TP33
Potassium fluoride 6.1 UN3422 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 52
solution.
Potassium 6.1 UN2628 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg E .......
fluoroacetate. TP33
Potassium 6.1 UN2655 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
fluorosilicate. TP33
Potassium hydrate, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Potassium
hydroxide, solid.
Potassium hydrogen ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
fluoride, see
Potassium hydrogen
difluoride.
[[Page 255]]
Potassium hydrogen ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
fluoride solution,
see Corrosive
liquid, n.o.s..
Potassium hydrogen 8 UN2509 II 8......... A7, IB8, IP2, 154........... 212........ 240........ 15 kg 50 kg A .......
sulfate. IP4, N34, T3,
TP33
Potassium 8 UN1811 II 8, 6.1.... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 25, 40,
hydrogendifluoride N3, N34, T3, 52
solid. TP33
Potassium 8 UN3421 II 8, 6.1.... IB2, N3, N34, 154........... 202........ 243........ 1 L 30 L A 25, 40,
hydrogendifluoride T7, TP2 52
solution.
.................... ........... .................. III 8, 6.1.... IB3, N3, N34, 154........... 203........ 241........ 5 L 60 L A 40, 52
T4, TP1
Potassium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrosulfite, see
Potassium
dithionite.
Potassium hydroxide, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
liquid, see
Potassium hydroxide
solution.
Potassium hydroxide, 8 UN1813 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A .......
solid. T3, TP33
Potassium hydroxide, 8 UN1814 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A .......
solution.
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Potassium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hypochlorite,
solution, see
Hypochlorite
solutions, etc.
Potassium, metal 4.3 UN1420 I 4.3....... A7, A19, A20, None.......... 201........ 244........ Forbidden 1 L E 40, 52
alloys, liquid. B27
Potassium, metal 4.3 UN3403 I 4.3....... A19, A20, B27, None.......... 211........ 244........ Forbidden 15 kg D .......
alloys, solid. IB4, IP1, T9,
TP7, TP33
Potassium 6.1 UN2864 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
metavanadate. T3, TP33
Potassium monoxide.. 8 UN2033 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 29
T3, TP33
Potassium nitrate... 5.1 UN1486 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
IP3, T1, TP33
Potassium nitrate 5.1 UN1487 II 5.1....... B78, IB8, IP4, 152........... 212........ 240........ 5 kg 25 kg A 56, 58
and sodium nitrite T3, TP33
mixtures.
Potassium nitrite... 5.1 UN1488 II 5.1....... IB8, IP4, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
TP33
Potassium 5.1 UN1489 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
perchlorate. TP33
Potassium 5.1 UN1490 II 5.1....... IB8, IP4, T3, 152........... 212........ 240........ 5 kg 25 kg D 56, 58,
permanganate. TP33 138
Potassium peroxide.. 5.1 UN1491 I 5.1....... A20, IB6, IP1, None.......... 211........ None....... Forbidden 15 kg B 13, 52,
N34 66, 75
Potassium persulfate 5.1 UN1492 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
IP3, T1, TP33
Potassium phosphide. 4.3 UN2012 I 4.3, 6.1.. A19, N40 None.......... 211........ None....... Forbidden 15 kg E 40, 52,
85
Potassium selenate, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Selenates or
Selenites.
[[Page 256]]
Potassium selenite, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Selenates or
Selenites.
Potassium solium 4.3 UN1422 I 4.3....... A7, A19, B27, None.......... 201........ 244........ Forbidden 1 L E 40, 52
alloys, liquid. N34, N40, T9,
TP3, TP7, TP31
Potassium sodium 4.3 UN3404 I 4.3....... A19, B27, N34, None.......... 211........ 244........ Forbidden 15 kg D 52
alloys, solid. N40, T9, TP7,
TP33
Potassium sulfide, 4.2 UN1382 II 4.2....... A19, A20, B16, None.......... 212........ 241........ 15 kg 50 kg A 52
anhydrous or IB6, IP2, N34,
Potassium sulfide T3, TP33
with less than 30
percent water of
crystallization.
Potassium sulfide, 8 UN1847 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 52
hydrated with not T3, TP33
less than 30
percent water of
crystallization.
Potassium superoxide 5.1 UN2466 I 5.1....... A20, IB6, IP1 None.......... 211........ None....... Forbidden 15 kg B 13, 52,
66, 75
Powder cake, wetted 1.1C UN0433 II 1.1C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
or Powder paste,
wetted with not
less than 17
percent alcohol by
mass.
Powder cake, wetted 1.3C UN0159 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
or Powder paste,
wetted with not
less than 25
percent water, by
mass.
Powder paste, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Powder cake, etc.
Powder, smokeless... 1.1C UN0160 II 1.1C...... ................ None.......... 62......... None....... Forbidden Forbidden ............ 26E
Powder, smokeless... 1.3C UN0161 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden ............ 26E
Power device, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
explosive, see
Cartridges, power
device.
Primers, cap type... 1.4S UN0044 II None...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
Primers, cap type... 1.1B UN0377 II 1.1B...... ................ None.......... 62......... None....... Forbidden Forbidden 11 .......
Primers, cap type... 1.4B UN0378 II 1.4B...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Primers, small arms, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Primers, cap
type.
Primers, tubular.... 1.3G UN0319 II 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Primers, tubular.... 1.4G UN0320 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Primers, tubular.... 1.4S UN0376 II None...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
[[Page 257]]
Printing ink, 3 UN1210 I 3......... T11, TP1, TP8 150........... 173........ 243........ 1 L 30 L E .......
flammable or
Printing ink
related material
(including printing
ink thinning or
reducing compound),
flammable.
.................... ........... .................. II 3......... 149, IB2, T4, 150........... 173........ 242........ 5 L 60 L B .......
TP1, TP8
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 173........ 242........ 60 L 220 L A .......
Projectiles, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
illuminating, see
Ammunition,
illuminating, etc.
Projectiles, inert 1.4S UN0345 II 1.4S...... ................ .............. 62......... None....... 25 kg 100 kg 01 .......
with tracer.
Projectiles, inert, 1.3G UN0424 II 1.3G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
with tracer.
Projectiles, inert, 1.4G UN0425 II 1.4G...... ................ .............. 62......... None....... Forbidden 75 kg 02 .......
with tracer.
Projectiles, with 1.2D UN0346 II 1.2D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
burster or
expelling charge.
Projectiles, with 1.4D UN0347 II 1.4D...... ................ .............. 62......... None....... Forbidden 75 kg 02 .......
burster or
expelling charge.
Projectiles, with 1.2F UN0426 II 1.2F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
burster or
expelling charge.
Projectiles, with 1.4F UN0427 II 1.4F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
burster or
expelling charge.
Projectiles, with 1.2G UN0434 II 1.2G...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
burster or
expelling charge.
Projectiles, with 1.4G UN0435 II 1.4G...... ................ .............. 62......... None....... Forbidden 75 kg 02 .......
burster or
expelling charge.
Projectiles, with 1.1F UN0167 II 1.1F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
bursting charge.
Projectiles, with 1.1D UN0168 II 1.1D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
bursting charge.
Projectiles, with 1.2D UN0169 II 1.2D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
bursting charge.
Projectiles, with 1.2F UN0324 II 1.2F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
bursting charge.
Projectiles, with 1.4D UN0344 II 1.4D...... ................ .............. 62......... None....... Forbidden 75 kg 02 .......
bursting charge.
Propadiene, 2.1 UN2200 ....... 2.1....... ................ None.......... 304........ 314, 315... Forbidden 150 kg B 40
stabilized.
Propadiene mixed ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
with methyl
acetylene, see
Methyl acetylene
and propadiene
mixtures,
stabilized.
Propane see also 2.1 UN1978 ....... 2.1....... 19, T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
Petroleum gases,
liquefied.
Propanethiols....... 3 UN2402 II 3......... A6, IB2, T4, 150........... 202........ 242........ 5 L 60 L E 95, 102
TP1, TP13
n-Propanol or Propyl 3 UN1274 II 3......... B1, IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
alcohol, normal.
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Propellant, liquid.. 1.3C UN0495 II 1.3C...... 37 None.......... 62......... None....... Forbidden Forbidden 10 .......
Propellant, liquid.. 1.1C UN0497 II 1.1C...... 37 None.......... 62......... None....... Forbidden Forbidden 10 .......
Propellant, solid... 1.1C UN0498 II 1.1C...... ................ None.......... 62......... None....... Forbidden Forbidden ............ 26E
Propellant, solid... 1.3C UN0499 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden ............ 26E
Propellant, solid... 1.4C UN0501 ....... 1.4C...... ................ None.......... 62......... None....... Forbidden Forbidden A 24E
Propionaldehyde..... 3 UN1275 II 3......... IB2, T7, TP1 150........... 202........ 242........ 5 L 60 L E .......
Propionic acid...... 8 UN1848 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
[[Page 258]]
Propionic anhydride. 8 UN2496 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Propionitrile....... 3 UN2404 II 3, 6.1.... IB2, T7, TP1, None.......... 202........ 243........ Forbidden 60 L E 40
TP13
Propionyl chloride.. 3 UN1815 II 3, 8...... IB1, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40
n-Propyl acetate.... 3 UN1276 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Propyl alcohol, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Propanol.
n-Propyl benzene.... 3 UN2364 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
n-Propyl 6.1 UN2740 I 6.1, 3, 8. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden B 21, 40,
chloroformate. B74, B77, N34, 100
T20, TP2, TP13,
TP38, TP44
Propyl chloride see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1-Chloropropane.
Propyl formates..... 3 UN1281 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
n-Propyl isocyanate. 6.1 UN2482 I 6.1, 3.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
B72, T22, TP2,
TP13, TP38, TP44
Propyl mercaptan, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Propanethiols.
n-Propyl nitrate.... 3 UN1865 II 3......... IB9 150........... 202........ None....... 5 L 60 L D 44, 89,
90, 100
Propylamine......... 3 UN1277 II 3, 8...... A7, IB2, N34, 150........... 202........ 243........ 1 L 5 L E 40
T7, TP1
Propylene see also 2.1 UN1077 ....... 2.1....... 19, T50 306........... 304........ 314, 315... Forbidden 150 kg E 40
Petroleum gases,
liquefied.
Propylene 6.1 UN2611 II 6.1, 3.... IB2, T7, TP2, 153........... 202........ 243........ 5 L 60 L A 12, 40,
chlorohydrin. TP13 48
Propylene oxide..... 3 UN1280 I 3......... A3, N34, T11, None.......... 201........ 243........ 1 L 30 L E 40
TP2, TP7
Propylene tetramer.. 3 UN2850 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
1,2-Propylenediamine 8 UN2258 II 8, 3...... A3, A6, IB2, None.......... 202........ 243........ 1 L 30 L A 40
N34, T7, TP2
Propyleneimine, 3 UN1921 I 3, 6.1.... A3, N34, T14, None.......... 201........ 243........ 1 L 30 L B 40
stabilized. TP2, TP13
Propyltrichlorosilan 8 UN1816 II 8, 3...... A7, B2, B6, IB2, None.......... 202........ 243........ Forbidden 30 L C 40
e. N34, T7, TP2,
TP13
[[Page 259]]
Prussic acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hydrogen cyanide.
Pyrethroid 3 UN3350 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticide, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Pyrethroid 6.1 UN3352 I 6.1....... T14, TP2, TP13, None.......... 211........ 242........ 1 L 30 L A 40
pesticide, liquid TP27
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 212........ 242........ 5 L 60 L A 40
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 213........ 240........ 60 L 220 L A 40
TP28
Pyrethroid 6.1 UN3351 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
pesticide, liquid, TP27
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L B 40
TP28
Pyrethroid 6.1 UN3349 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticide, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Pyridine............ 3 UN1282 II 3......... IB2, T4, TP2 None.......... 202........ 242........ 5 L 60 L B 21, 100
Pyridine perchlorate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
G Pyrophoric liquid, 4.2 UN3194 I 4.2....... ................ None.......... 181........ 244........ Forbidden Forbidden D 18
inorganic, n.o.s..
G Pyrophoric liquids, 4.2 UN2845 I 4.2....... B11, T22, TP2, None.......... 181........ 244........ Forbidden Forbidden D 18
organic, n.o.s.. TP7
G Pyrophoric metals, 4.2 UN1383 I 4.2....... B11, T21, TP7, None.......... 187........ 242........ Forbidden Forbidden D .......
n.o.s., or TP33
Pyrophoric alloys,
n.o.s..
G Pyrophoric solid, 4.2 UN3200 I 4.2....... T21, TP7, TP33 None.......... 187........ 242........ Forbidden Forbidden D .......
inorganic, n.o.s..
G Pyrophoric solids, 4.2 UN2846 I 4.2....... ................ None.......... 187........ 242........ Forbidden Forbidden D .......
organic, n.o.s..
Pyrosulfuryl 8 UN1817 II 8......... B2, IB2, T8, 154........... 202........ 242........ 1 L 30 L C 40
chloride. TP2, TP12
Pyroxylin solution ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
or solvent, see
Nitrocellulose.
Pyrrolidine......... 3 UN1922 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40
Quebrachitol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
pentanitrate.
Quicklime, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Calcium oxide.
Quinoline........... 6.1 UN2656 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 12
R 12, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dichlorodifluoromet
hane.
R 12B1, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chlorodifluorobromo
methane.
[[Page 260]]
R 13, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chlorotrifluorometh
ane.
R 13B1, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Bromotrifluorometha
ne.
R 14, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Tetrafluoromethane.
R 21, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dichlorofluorometha
ne.
R 22, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chlorodifluorometha
ne.
R 114, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dichlorotetrafluoro
ethane.
R 115, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chloropentafluoroet
hane.
R 116, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hexafluoroethane.
R 124, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chlorotetrafluoroet
hane.
R 133a, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chlorotrifluoroetha
ne.
R 152a, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Difluoroethane.
R 500, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Dichlorodifluoromet
hane and
difluorethane, etc.
R 502, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chlorodifluorometha
ne and
chloropentafluoroet
hane mixture, etc.
R 503, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Chlorotrifluorometh
ane and
trifluoromethane,
etc.
Radioactive 7 UN2909 ....... None...... ................ 422, 426...... 422, 426... 422, 426... ........... ........... A .......
material, excepted
package-articles
manufactured from
natural uranium or
depleted uranium or
natural thorium.
Radioactive 7 UN2908 ....... Empty..... ................ 422, 428...... 422, 428... 422, 428... ........... ........... A .......
material, excepted
package-empty
packaging.
Radioactive 7 UN2911 ....... None...... ................ 422, 424...... 422, 424... ........... ........... ........... A .......
material, excepted
package-instruments
or articles.
[[Page 261]]
Radioactive 7 UN2910 ....... None...... ................ 421, 422...... 421, 422... 421, 422... ........... ........... A .......
material, excepted
package-limited
quantity of
material.
Radioactive 7 UN2912 ....... 7......... A56, T5, TP4, W7 421, 422, 428. 427........ 427........ ........... ........... A 95, 129
material, low
specific activity
(LSA-I) non fissile
or fissile-excepted.
Radioactive 7 UN3321 ....... 7......... A56, T5, TP4, W7 421, 422, 428. 427........ 427........ ........... ........... A 95, 129
material, low
specific activity
(LSA-II) non
fissile or fissile-
excepted.
Radioactive 7 UN3322 ....... 7......... A56, T5, TP4, W7 421, 422, 428. 427........ 427........ ........... ........... A 95, 129
material, low
specific activity
(LSA-III) non
fissile or fissile
excepted.
Radioactive 7 UN2913 ....... 7......... A56 421, 422, 428. 427........ 427........ ........... ........... A 95
material, surface
contaminated
objects (SCO-I or
SCO-II) non fissile
or fissile-excepted.
Radioactive 7 UN2919 ....... 7......... A56, 139 .............. ........... ........... ........... ........... A 95, 105
material,
transported under
special
arrangement, non
fissile or fissile
excepted.
Radioactive 7 UN3331 ....... 7......... A56, 139 .............. ........... ........... ........... ........... A 95, 105
material,
transported under
special
arrangement,
fissile.
Radioactive 7 UN3327 ....... 7......... A56, W7, W8 453........... 417........ 417........ ........... ........... A 95,
material, Type A 105,
package, fissile 131
non-special form.
Radioactive 7 UN2915 ....... 7......... A56, W7, W8 .............. 415, 418... 415, 419... ........... ........... A 95, 130
material, Type A
package non-special
form, non fissile
or fissile-excepted.
Radioactive 7 UN3332 ....... 7......... A56, W7, W8 .............. 415, 476... 415, 476... ........... ........... A 95
material, Type A
package, special
form non fissile or
fissile-excepted.
Radioactive 7 UN3333 ....... 7......... A56, W7, W8 453........... 417, 476... 417, 476... ........... ........... A 95, 105
material, Type A
package, special
form, fissile.
Radioactive 7 UN3329 ....... 7......... A56 453........... 417........ 417........ ........... ........... A 95, 105
material, Type B(M)
package, fissile.
Radioactive 7 UN2917 ....... 7......... A56 .............. 416........ 416........ ........... ........... A 95, 105
material, Type B(M)
package non fissile
or fissile-excepted.
Radioactive 7 UN3328 ....... 7......... A56 453........... 417........ 417........ ........... ........... A 95, 105
material, Type B(U)
package, fissile.
Radioactive 7 UN2916 ....... 7......... A56 .............. 416........ 416........ ........... ........... A 95, 105
material, Type B(U)
package non fissile
or fissile-excepted.
Radioactive 7 UN2978 ....... 7, 8...... ................ 423........... 420, 427... 420, 427... ........... ........... A 95, 132
material, uranium
hexafluoride non
fissile or fissile-
excepted.
I Radioactive 7 UN2977 ....... 7, 8...... ................ 453........... 417, 420... 417, 420... ........... ........... A 95, 132
material, uranium
hexafluoride,
fissile.
A W Rags, oily.......... 4.2 UN1856 III 4.2....... ................ 151........... 213........ 240........ Forbidden Forbidden A .......
[[Page 262]]
Railway torpedo, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Signals, railway
track, explosive.
Rare gases and 2.2 UN1981 ....... 2.2....... ................ 306........... 302........ None....... 75 kg 150 kg A .......
nitrogen mixtures,
compressed.
Rare gases and 2.2 UN1980 ....... 2.2....... 79 306........... 302........ None....... 75 kg 150 kg A .......
oxygen mixtures,
compressed.
Rare gases mixtures, 2.2 UN1979 ....... 2.2....... ................ 306........... 302........ None....... 75 kg 150 kg A .......
compressed.
RC 318, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Octafluorocyclobuta
ne.
RDX and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
cyclotetramethylene
tetranitramine,
wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized.
RDX and HMX 1.1D UN0391 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
mixtures, wetted
with not less than
15 percent water by
mass or RDX and HMX
mixtures,
desensitized with
not less than 10
percent
phlegmatizer by
mass.
RDX and Octogen ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixtures, wetted or
desensitized see
RDX and HMX
mixtures, wetted or
desensitized etc.
RDX, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Cyclotrimethylene
trinitramine, etc.
Receptacles, small, 2.2 UN2037 ....... 2.2, 5.1.. A14 306........... 304........ None....... 1 kg 15 kg B 40
containing agas
(gas cartridges)
non-flammable,
without release
device, not
refillable and not
exceeding 1 L
capacity.
Receptacles, small, 2.1 UN2037 ....... 2.1....... ................ 306........... 304........ None....... 1 kg 15 kg B 40
containing gas (gas
cartridges)
flammable, without
release device, not
refillable and not
exceeding 1 L
capacity.
[[Page 263]]
Receptacles, small, 2.2 UN2037 ....... 2.2....... 306........... 304........ None....... 1 kg 15 kg B 40
containing gas (gas
cartridges) non-
flammable, without
release device, not
refillable and not
exceeding 1 L
capacity.
Red phosphorus, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Phosphorus,
amorphous.
Refrigerant gas R 2.2 UN3337 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
404A.
Refrigerant gas R 2.2 UN3338 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
407A.
Refrigerant gas R 2.2 UN3339 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
407B.
Refrigerant gas R 2.2 UN3340 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
407C.
G Refrigerant gases, 2.2 UN1078 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
n.o.s..
D Refrigerant gases, 2.1 NA1954 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg D 40
n.o.s. or
Dispersant gases,
n.o.s..
Refrigerating 2.1 UN3358 ....... 2.1....... ................ 306, 307...... 306........ 306........ Forbidden Forbidden D 40
machines,
containing
flammable, non-
toxic, liquefied
gas.
Refrigerating 2.2 UN2857 ....... 2.2....... A53 306, 307...... 306........ 306, 307... 450 kg 450 kg A .......
machines,
containing non-
flammable, non-
toxic gases, or
ammonia solutions
(UN2672).
Regulated medical 6.2 UN3291 II 6.2....... A13 134........... 197........ 197........ No limit No limit A 40
waste.
Release devices, 1.4S UN0173 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
explosive.
Resin solution, 3 UN1866 I 3......... B52, T11, TP1, 150........... 201........ 243........ 1 L 30 L E .......
flammable. TP8, TP28
.................... ........... .................. II 3......... 149, B52, IB2, 150........... 173........ 242........ 5 L 60 L B .......
T4, TP1, TP8
.................... ........... .................. III 3......... B1, B52, IB3, 150........... 173........ 242........ 60 L 220 L A .......
T2, TP1
Resorcinol.......... 6.1 UN2876 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Rifle grenade, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Grenades, hand or
rifle, etc.
Rifle powder, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Powder, smokeless
(UN 0160).
Rivets, explosive... 1.4S UN0174 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
Road asphalt or tar ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
liquid, see Tars,
liquid, etc.
Rocket motors....... 1.3C UN0186 II 1.3C...... 109 None.......... 62......... None....... Forbidden 220 kg 03 .......
Rocket motors....... 1.1C UN0280 II 1.1C...... 109 None.......... 62......... None....... Forbidden Forbidden 03 .......
Rocket motors....... 1.2C UN0281 II 1.2C...... 109 None.......... 62......... None....... Forbidden Forbidden 03 .......
Rocket motors, 1.2J UN0395 II 1.2J...... 109 None.......... 62......... None....... Forbidden Forbidden 04 23E
liquid fueled.
Rocket motors, 1.3J UN0396 II 1.3J...... 109 None.......... 62......... None....... Forbidden Forbidden 04 23E
liquid fueled.
[[Page 264]]
Rocket motors with 1.3L UN0250 II 1.3L...... 109 None.......... 62......... None....... Forbidden Forbidden 08 8E,
hypergolic liquids 14E,
with or without an 15E
expelling charge.
Rocket motors with 1.2L UN0322 II 1.2L...... 109 None.......... 62......... None....... Forbidden Forbidden 08 8E,
hypergolic liquids 14E,
with or without an 15E
expelling charge.
Rockets, line- 1.2G UN0238 II 1.2G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
throwing.
Rockets, line- 1.3G UN0240 II 1.3G...... ................ None.......... 62......... None....... Forbidden 75 kg 07 .......
throwing.
Rockets, line- 1.4G UN0453 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
throwing.
Rockets, liquid 1.1J UN0397 II 1.1J...... ................ None.......... 62......... None....... Forbidden Forbidden 04 23E
fueled with
bursting charge.
Rockets, liquid 1.2J UN0398 II 1.2J...... ................ None.......... 62......... None....... Forbidden Forbidden 04 23E
fueled with
bursting charge.
Rockets, with 1.1F UN0180 II 1.1F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
bursting charge.
Rockets, with 1.1E UN0181 II 1.1E...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
bursting charge.
Rockets, with 1.2E UN0182 II 1.2E...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
bursting charge.
Rockets, with 1.2F UN0295 II 1.2F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
bursting charge.
Rockets, with 1.2C UN0436 II 1.2C...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
expelling charge.
Rockets, with 1.3C UN0437 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
expelling charge.
Rockets, with 1.4C UN0438 II 1.4C...... ................ None.......... 62......... None....... Forbidden 75 kg 02 .......
expelling charge.
Rockets, with inert 1.3C UN0183 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
head.
Rockets, with inert 1.2C UN0502 ....... 1.2C...... ................ None.......... 62......... None....... Forbidden Forbidden B 1E, 5E
head.
Rosin oil........... 3 UN1286 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Rubber solution..... 3 UN1287 II 3......... 149, IB2, T4, 150........... 202........ 242........ 5 L 60 L B .......
TP1, TP8
III B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Rubber scrap or 4.1 UN1345 II 4.1....... IB8, IP2, IP4, 151........... 212........ 240........ 15 kg 50 kg A .......
shoddy, powdered or T3, TP33
granulated, not
exceeding 840
microns and rubber
contend exceeding
45%.
Rubidium............ 4.3 UN1423 I 4.3....... 22, A7, A19, None.......... 211........ 242........ Forbidden 15 kg D 52
IB4, IP1, N34,
N40, N45
Rubidium hydroxide.. 8 UN2678 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 29
T3, TP33
Rubidium hydroxide 8 UN2677 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A 29
solution.
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A 29
Safety fuse, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Fuse, safety.
[[Page 265]]
G Samples, explosive, ........... UN0190 II .......... 113 None.......... 62......... None....... Forbidden Forbidden 14 .......
other than
initiating
explosives.
Sand acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Fluorosilicic acid.
Seed cake, 4.2 UN1386 III None...... IB8, IP3, IP7, None.......... 213........ 241........ Forbidden Forbidden A 13
containing N7
vegetable oil
solvent extractions
and expelled seeds,
with not more than
10 percent of oil
and when the amount
of moisture is
higher than 11
percent, with not
more than 20
percent of oil and
moisture combined.
I Seed cake with more 4.2 UN1386 III None...... IB8, IP3, IP7, None.......... 213........ 241........ Forbidden Forbidden E 13
than 1.5 percent N7
oil and not more
than 11 percent
moisture.
I Seed cake with not 4.2 UN2217 III None...... IB8, IP3, IP7, None.......... 213........ 241........ Forbidden Forbidden A 13
more than 1.5 N7
percent oil and not
more than 11
percent moisture.
Selenates or 6.1 UN2630 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg E .......
Selenites. TP33
Selenic acid........ 8 UN1905 I 8......... IB7, IP1, N34, None.......... 211........ 242........ Forbidden 25 kg A .......
T6, TP33
+ Selenium compound, 6.1 UN3440 I 6.1....... T14, TP2, TP27 None.......... 201........ 243........ 1L 30L B .......
liquid, n.o.s.
II 6.1....... IIB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B .......
TP27
III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A .......
TP28
Selenium compound, 6.1 UN3283 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg B .......
solid, n.o.s.. TP33
II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B .......
T3, TP33
III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Selenium disulfide.. 6.1 UN2657 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Selenium 2.3 UN2194 ....... 2.3, 8.... 1 None.......... 302........ None....... Forbidden Forbidden D 40
hexafluoride.
Selenium nitride.... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Selenium oxychloride 8 UN2879 I 8, 6.1.... A3, A6, A7, N34, None.......... 201........ 243........ 0.5 L 2.5 L E 40
T10, TP2, TP12,
TP13
Self-defense spray, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
aerosol, see
Aerosols, etc.
+ A D Self-defense spray, 9 NA3334 III 9......... A37 155........... 203........ None....... No limit No limit A .......
non-pressurized.
G Self-heating liquid, 4.2 UN3188 II 4.2, 8.... IB2 None.......... 202........ 243........ 1 L 5 L C .......
corrosive,
inorganic, n.o.s..
.................... ........... .................. III 4.2, 8.... IB2 None.......... 203........ 241........ 5 L 60 L C .......
G Self-heating liquid, 4.2 UN3185 II 4.2, 8.... IB2 None.......... 202........ 243........ 1 L 5 L C .......
corrosive, organic,
n.o.s..
.................... ........... .................. III 4.2, 8.... IB2 None.......... 203........ 241........ 5 L 60 L C .......
[[Page 266]]
G Self-heating liquid, 4.2 UN3186 II 4.2....... IB2 None.......... 202........ 242........ 1 L 5 L C .......
inorganic, n.o.s..
.................... ........... .................. III 4.2....... IB2 None.......... 203........ 241........ 5 L 60 L C .......
G Self-heating liquid, 4.2 UN3183 II 4.2....... IB2 None.......... 202........ 242........ 1 L 5 L C .......
organic, n.o.s..
.................... ........... .................. III 4.2....... IB2 None.......... 203........ 241........ 5 L 60 L C .......
G Self-heating liquid, 4.2 UN3187 II 4.2, 6.1.. IB2 None.......... 202........ 243........ 1 L 5 L C .......
toxic, inorganic,
n.o.s..
.................... ........... .................. III 4.2, 6.1.. IB2 None.......... 203........ 241........ 5 L 60 L C .......
G Self-heating liquid, 4.2 UN3184 II 4.2, 6.1.. IB2 None.......... 202........ 243........ 1 L 5 L C .......
toxic, organic,
n.o.s..
.................... ........... .................. III 4.2, 6.1.. IB2 None.......... 203........ 241........ 5 L 60 L C .......
G Self-heating solid, 4.2 UN3192 II 4.2, 8.... IB5, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg C .......
corrosive, TP33
inorganic, n.o.s..
.................... ........... .................. III 4.2, 8.... IB8, IP3, T1, None.......... 213........ 242........ 25 kg 100 kg C .......
TP33
G Self-heating, solid, 4.2 UN3126 II 4.2, 8.... IB5, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg C .......
corrosive, organic, TP33
n.o.s..
.................... ........... .................. III 4.2, 8.... IB8, IP3, T1, None.......... 213........ 242........ 25 kg 100 kg C .......
TP33
G Self-heating solid, 4.2 UN3190 II 4.2....... IB6, IP2, T3, None.......... 212........ 241........ 15 kg 50 kg C .......
inorganic, n.o.s.. TP33
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg C .......
TP33
G Self-heating, solid, 4.2 UN3088 II 4.2....... IB6, IP2, T3, None.......... 212........ 241........ 15 kg 50 kg C .......
organic, n.o.s.. TP33
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg C .......
TP33
G Self-heating, solid, 4.2 UN3127 ....... 4.2, 5.1.. ................ None.......... 214........ 214........ Forbidden Forbidden ............ .......
oxidizing, n.o.s..
G Self-heating solid, 4.2 UN3191 II 4.2, 6.1.. IB5, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg C .......
toxic, inorganic, TP33
n.o.s..
.................... ........... .................. III 4.2, 6.1.. IB8, IP3, T1, None.......... 213........ 242........ 25 kg 100 kg C .......
TP33
G Self-heating, solid, 4.2 UN3128 II 4.2, 6.1.. IB5, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg C .......
toxic, organic, TP33
n.o.s..
[[Page 267]]
.................... ........... .................. III 4.2, 6.1.. IB8, IP3, T1, None.......... 213........ 242........ 25 kg 100 kg C .......
TP33
Self-propelled ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
vehicle, see
Engines or
Batteries etc.
G Self-reactive liquid 4.1 UN3221 II 4.1....... 53 None.......... 224........ None....... Forbidden Forbidden D 52, 53
type B.
G Self-reactive liquid 4.1 UN3231 II 4.1....... 53 None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type B, temperature 53
controlled.
G Self-reactive liquid 4.1 UN3223 II 4.1....... ................ None.......... 224........ None....... 5 L 10 L D 52, 53
type C.
G Self-reactive liquid 4.1 UN3233 II 4.1....... ................ None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type C, temperature 53
controlled.
G Self-reactive liquid 4.1 UN3225 II 4.1....... ................ None.......... 224........ None....... 5 L 10 L D 52, 53
type D.
G Self-reactive liquid 4.1 UN3235 II 4.1....... ................ None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type D, temperature 53
controlled.
G Self-reactive liquid 4.1 UN3227 II 4.1....... ................ None.......... 224........ None....... 10 L 25 L D 52, 53
type E.
G Self-reactive liquid 4.1 UN3237 II 4.1....... ................ None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type E, temperature 53
controlled.
G Self-reactive liquid 4.1 UN3229 II 4.1....... None.......... 224........ None....... 10 L 25 L D 52, 53
type F.
G Self-reactive liquid 4.1 UN3239 II 4.1....... ................ None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type F, temperature 53
controlled.
G Self-reactive solid 4.1 UN3222 II 4.1....... 53 None.......... 224........ None....... Forbidden Forbidden D 52, 53
type B.
G Self-reactive solid 4.1 UN3232 II 4.1....... 53 None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type B, temperature 53
controlled.
G Self-reactive solid 4.1 UN3224 II 4.1....... ................ None.......... 224........ None....... 5 kg 10 kg D 52, 53
type C.
G Self-reactive solid 4.1 UN3234 II 4.1....... ................ None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type C, temperature 53
controlled.
G Self-reactive solid 4.1 UN3226 II 4.1....... ................ None.......... 224........ None....... 5 kg 10 kg D 52, 53
type D.
G Self-reactive solid 4.1 UN3236 II 4.1....... ................ None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type D, temperature 53
controlled.
G Self-reactive solid 4.1 UN3228 II 4.1....... ................ None.......... 224........ None....... 10 kg 25 kg D 52, 53
type E.
G Self-reactive solid 4.1 UN3238 II 4.1....... ................ None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type E, temperature 53
controlled.
G Self-reactive solid 4.1 UN3230 II 4.1....... ................ None.......... 224........ None....... 10 kg 25 kg D 52, 53
type F.
G Self-reactive solid 4.1 UN3240 II 4.1....... ................ None.......... 224........ None....... Forbidden Forbidden D 2, 52,
type F, temperature 53
controlled.
Shale oil........... 3 UN1288 I 3......... T11, TP1, TP8, None.......... 201........ 243........ 1 L 30 L B .......
TP27
.................... ........... .................. II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Shaped charges, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Charges, shaped,
etc.
Signal devices, hand 1.4G UN0191 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Signal devices, hand 1.4S UN0373 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
Signals, distress, 1.1G UN0194 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
ship.
Signals, distress, 1.3G UN0195 II 1.3G...... ................ None.......... 62......... None....... Forbidden 75 kg 07 .......
ship.
Signals, highway, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Signal devices,
hand.
Signals, railway 1.1G UN0192 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
track, explosive.
Signals, railway 1.4S UN0193 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
track, explosive.
Signals, railway 1.3G UN0492 ....... 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
track, explosive.
[[Page 268]]
Signals, railway 1.4G UN0493 ....... 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
track, explosive.
Signals, ship ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
distress, water-
activated, see
Contrivances, water-
activated, etc.
Signals, smoke...... 1.1G UN0196 II 1.1G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Signals, smoke...... 1.4G UN0197 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
Signals, smoke...... 1.2G UN0313 II 1.2G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Signals, smoke...... 1.3G UN0487 II 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
Silane.............. 2.1 UN2203 ....... 2.1....... ................ None.......... 302........ None....... Forbidden Forbidden E 40, 57,
104
Silicofluoric acid, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Fluorosilicic
acid.
Silicon chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Silicon
tetrachloride.
Silicon powder, 4.1 UN1346 III 4.1....... A1, IB8, IP3, None.......... 213........ 240........ 25 kg 100 kg A 74
amorphous. T1, TP33
Silicon 8 UN1818 II 8......... A3, A6, B2, B6, 154........... 202........ 242........ 1 L 30 L C 40
tetrachloride. IB2, T7, TP2,
TP7
Silicon 2.3 UN1859 ....... 2.3, 8.... 2 None.......... 302........ None....... Forbidden Forbidden D 40
tetrafluoride.
Silver acetylide Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Silver arsenite..... 6.1 UN1683 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Silver azide (dry).. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Silver chlorite Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Silver cyanide...... 6.1 UN1684 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40, 52
T3, TP33
Silver fulminate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Silver nitrate...... 5.1 UN1493 II 5.1....... IB8, IP4, T3, 152........... 212........ 242........ 5 kg 25 kg A .......
TP33
Silver oxalate (dry) Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Silver picrate (dry) Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Silver picrate, 4.1 UN1347 I 4.1....... 23 None.......... 211........ None....... Forbidden Forbidden D 28, 36
wetted with not
less than 30
percent water, by
mass.
Sludge, acid........ 8 UN1906 II 8......... A3, A7, B2, IB2, None.......... 202........ 242........ Forbidden 30 L C 14
N34, T8, TP2,
TP12, TP28
[[Page 269]]
D Smokeless powder for 4.1 NA3178 I 4.1....... 16 None.......... 171........ None....... Forbidden 7.3 kg A .......
small arms (100
pounds or less).
Soda lime with more 8 UN1907 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
than 4 percent TP33
sodium hydroxide.
Sodium.............. 4.3 UN1428 I 4.3....... A7, A8, A19, None.......... 211........ 244........ Forbidden 15 kg D 52
A20, B9, B48,
B68, IB4, IP1,
N34, T9, TP7,
TP33, TP46
Sodium aluminate, 8 UN2812 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
solid. TP33
Sodium aluminate, 8 UN1819 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A .......
solution.
.................... ........... .................. III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
Sodium aluminum 4.3 UN2835 II 4.3....... A8, A19, A20, 151........... 212........ 242........ Forbidden 50 kg E 52
hydride. IB4, T3, TP33
Sodium ammonium 6.1 UN2863 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
vanadate. T3, TP33
Sodium arsanilate... 6.1 UN2473 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Sodium arsenate..... 6.1 UN1685 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Sodium arsenite, 6.1 UN1686 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
aqueous solutions.
.................... ........... .................. III 6.1....... IB3, T4, TP2 153........... 203........ 241........ 60 L 220 L A .......
Sodium arsenite, 6.1 UN2027 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
solid. T3, TP33
Sodium azide........ 6.1 UN1687 II 6.1....... IB8, IP2, IP4 153........... 212........ 242........ 25 kg 100 kg A 36, 52,
91
Sodium bifluoride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sodium
hydrogendifluoride.
Sodium bisulfite, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Bisulfites, aqueous
solutions, n.o.s..
Sodium borohydride.. 4.3 UN1426 I 4.3....... N40 None.......... 211........ 242........ Forbidden 15 kg E 52
Sodium borohydride 8 UN3320 II 8......... B2, IB2, N34, 154........... 202........ 242........ 1 L 30 L A 52
and sodium T7, TP2
hydroxide solution,
with not more than
12 percent sodium
borohydride and not
more than 40
percent sodium
hydroxide by mass.
.................... ........... .................. III 8......... B2, IB3, N34, 154........... 203........ 241........ 5 L 60 L A 52
T4, TP2
Sodium bromate...... 5.1 UN1494 II 5.1....... IB8, IP4, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
TP33
Sodium cacodylate... 6.1 UN1688 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 52
T3, TP33
Sodium carbonate 5.1 UN3378 II 5.1....... IB8, IP2, IP4, 152........... 212........ 240........ 5 kg 25 kg A 13, 48,
peroxyhydrate. T3, TP33 75
.................... ........... .................. III 5.1....... IB8, IP3, T1, 152........... 213........ 240........ 25 kg 100 kg A 13, 48,
TP33 75
[[Page 270]]
Sodium chlorate..... 5.1 UN1495 II 5.1....... A9, IB8, IP4, 152........... 212........ 240........ 5 kg 25 kg A 56, 58
N34, T3, TP33
Sodium chlorate, 5.1 UN2428 II 5.1....... A2, IB2, T4, TP1 152........... 202........ 241........ 1 L 5 L B 56, 58,
aqueous solution. 133
.................... ........... .................. III 5.1....... A2, IB2, T4, TP1 152........... 203........ 241........ 2.5 L 30 L B 56, 58,
69, 133
Sodium chlorate ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
mixed with
dinitrotoluene, see
Explosive blasting,
type C.
Sodium chlorite..... 5.1 UN1496 II 5.1....... A9, IB8, IP2, None.......... 212........ 242........ 5 kg 25 kg A 56, 58
IP4, N34, T3,
TP33
Sodium chloroacetate 6.1 UN2659 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Sodium cuprocyanide, 6.1 UN2316 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 52
solid. TP33
Sodium cuprocyanide, 6.1 UN2317 I 6.1....... T14, TP2, TP13 None.......... 201........ 243........ 1 L 30 L B 40, 52
solution.
Sodium cyanide, 6.1 UN1689 I 6.1....... B69, B77, IB7, None.......... 211........ 242........ 5 kg 50 kg B 52
solid. N74, N75, T6,
TP33
Sodium cyanide 6.1 UN3414 I 6.1....... B69, B77, N74, None.......... 201........ 243........ 1 L 30 L B 52
solution. N75, T14, TP2,
TP13
.................... ........... .................. II 6.1....... B69, B77, IB2, 153........... 202........ 243........ 5 L 60 L B 52
N74, N75, T11,
TP2, TP13, TP27
.................... ........... .................. III 6.1....... B69, B77, IB3, 153........... 203........ 241........ 60 L 220 L A 52
N74, N75, T7,
TP2, TP13, TP28
Sodium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
dichloroisocyanurat
e or Sodium
dichloro-s-
triazinetrione, see
Dichloroisocyanuric
acid etc.
Sodium dinitro-o- 1.3C UN0234 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
cresolate, dry or
wetted with less
than 15 percent
water, by mass.
Sodium dinitro-o- 4.1 UN3369 I 4.1....... 162, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 36
cresolate, wetted N41, N84
with not less than
10% water, by mass.
[[Page 271]]
Sodium dinitro-o- 4.1 UN1348 I 4.1, 6.1.. 23, A8, A19, None.......... 211........ None....... 1 kg 15 kg E 28, 36
cresolate, wetted A20, N41
with not less than
15 percent water,
by mass.
Sodium dithionite or 4.2 UN1384 II 4.2....... A19, A20, IB6, None.......... 212........ 241........ 15 kg 50 kg E 13
Sodium hydrosulfite. IP2, T3, TP33
Sodium fluoride, 6.1 UN1690 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
solid. TP33
Sodium fluoride 6.1 UN3415 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A 52
solution.
Sodium fluoroacetate 6.1 UN2629 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg E .......
TP33
Sodium 6.1 UN2674 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
fluorosilicate. TP33
Sodium hydrate, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Sodium hydroxide,
solid.
Sodium hydride...... 4.3 UN1427 I 4.3....... A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 52
Sodium 8 UN2439 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 12, 25,
hydrogendifluoride. N3, N34, T3, 40, 52
TP33
Sodium hydrosulfide, 4.2 UN2318 II 4.2....... A7, A19, A20, None.......... 212........ 241........ 15 kg 50 kg A .......
with less than 25 IB6, IP2, T3,
percent water of TP33
crystallization.
Sodium hydrosulfide 8 UN2949 II 8......... A7, IB8, IP2, 154........... 212........ 240........ 15 kg 50 kg A 52
with not less than IP4, T7, TP2
25 percent water of
crystallization.
Sodium hydrosulfite, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sodium
dithionite.
Sodium hydroxide, 8 UN1823 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A .......
solid. T3, TP33
Sodium hydroxide 8 UN1824 II 8......... B2, IB2, N34, 154........... 202........ 242........ 1 L 30 L A .......
solution. T7, TP2
.................... ........... .................. III 8......... IB3, N34, T4, 154........... 203........ 241........ 5 L 60 L A .......
TP1
Sodium hypochlorite, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Hypochlorite
solutions etc.
Sodium metal, liquid ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
alloy, see Alkali
metal alloys,
liquid, n.o.s..
Sodium methylate.... 4.2 UN1431 II 4.2, 8.... A7, A19, IB5, None.......... 212........ 242........ 15 kg 50 kg B .......
IP2, T3, TP33
Sodium methylate 3 UN1289 II 3, 8...... IB2, T7, TP1, 150........... 202........ 243........ 1 L 5 L B .......
solutions in TP8
alcohol.
.................... ........... .................. III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A .......
Sodium monoxide..... 8 UN1825 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A .......
T3, TP33
Sodium nitrate...... 5.1 UN1498 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
IP3, T1, TP33
Sodium nitrate and 5.1 UN1499 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
potassium nitrate IP3, T1, TP33
mixtures.
Sodium nitrite...... 5.1 UN1500 III 5.1, 6.1.. A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
IP3, T1, TP33
[[Page 272]]
Sodium 6.1 UN2567 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
pentachlorophenate. T3, TP33
Sodium perborate 5.1 UN3377 III 5.1....... IB8, IP3, T1, 152........... 213........ 240........ 25 kg 100 kg A 13, 48,
monohydrate. TP33 75
Sodium perchlorate.. 5.1 UN1502 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
TP33
Sodium permanganate. 5.1 UN1503 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg D 56, 58,
TP33 138
Sodium peroxide..... 5.1 UN1504 I 5.1....... A20, IB5, IP1, None.......... 211........ None....... Forbidden 15 kg B 13, 52,
N34 66, 75
Sodium peroxoborate, 5.1 UN3247 II 5.1....... IB8, IP4, T3, 152........... 212........ 240........ 5 kg 25 kg A 13, 25
anhydrous. TP33
Sodium persulfate... 5.1 UN1505 III 5.1....... A1, IB8, IP3, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
T1, TP33
Sodium phosphide.... 4.3 UN1432 I 4.3, 6.1.. A19, N40 None.......... 211........ None....... Forbidden 15 kg E 40, 52,
85
Sodium picramate, 1.3C UN0235 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
dry or wetted with
less than 20
percent water, by
mass.
Sodium picramate, 4.1 UN1349 I 4.1....... 23, A8, A19, N41 None.......... 211........ None....... Forbidden 15 kg E 28, 36
wetted with not
less than 20
percent water, by
mass.
Sodium picryl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
peroxide.
Sodium potassium ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
alloys, see
Potassium sodium
alloys.
Sodium selenate, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Selenates or
Selenites.
Sodium sulfide, 4.2 UN1385 II 4.2....... A19, A20, IB6, None.......... 212........ 241........ 15 kg 50 kg A 52
anhydrous or Sodium IP2, N34, T3,
sulfide with less TP33
than 30 percent
water of
crystallization.
Sodium sulfide, 8 UN1849 II 8......... IB8, IP2, IP4, 154........... 212........ 240........ 15 kg 50 kg A 26
hydrated with not T3, TP33
less than 30
percent water.
Sodium superoxide... 5.1 UN2547 I 5.1....... A20, IB6, IP1, None.......... 211........ None....... Forbidden 15 kg E 13, 52,
N34 66, 75
Sodium tetranitride. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
G Solids containing 8 UN3244 II 8......... 49, IB5, T3, 154........... 212........ 240........ 15 kg 50 kg B 40
corrosive liquid, TP33
n.o.s..
[[Page 273]]
G Solids containing 4.1 UN3175 II 4.1....... 47, IB6, IP2, 151........... 212........ 240........ 15 kg 50 kg B .......
flammable liquid, T3, TP33
n.o.s..
G Solids containing 6.1 UN3243 II 6.1....... 48, IB2, T2, 153........... 212........ 240........ 25 kg 100 kg B 40
toxic liquid, TP33
n.o.s..
Sounding devices, 1.2F UN0204 II 1.2F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
explosive.
Sounding devices, 1.1F UN0296 II 1.1F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
explosive.
Sounding devices, 1.1D UN0374 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
explosive.
Sounding devices, 1.2D UN0375 II 1.2D...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
explosive.
Spirits of salt, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hydrochloric acid.
Squibs, see Igniters ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
etc.
Stannic chloride, 8 UN1827 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L C .......
anhydrous.
Stannic chloride 8 UN2440 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
pentahydrate. TP33
Stannic phosphide... 4.3 UN1433 I 4.3, 6.1.. A19, N40 None.......... 211........ 242........ Forbidden 15 kg E 40, 52,
85
Steel swarf, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Ferrous metal
borings, etc.
Stibine............. 2.3 UN2676 ....... 2.3, 2.1.. 1 None.......... 304........ None....... Forbidden Forbidden D 40
Storage batteries, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
wet, see Batteries,
wet etc.
Strontium arsenite.. 6.1 UN1691 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Strontium chlorate.. 5.1 UN1506 II 5.1....... A1, A9, IB8, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
IP2, IP4, N34,
T3, TP33
Strontium nitrate... 5.1 UN1507 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
IP3, T1, TP33
Strontium 5.1 UN1508 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
perchlorate. TP33
Strontium peroxide.. 5.1 UN1509 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 13, 52,
TP33 66, 75
Strontium phosphide. 4.3 UN2013 I 4.3, 6.1.. A19, N40 None.......... 211........ None....... Forbidden 15 kg E 40, 52,
85
Strychnine or 6.1 UN1692 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
Strychnine salts. TP33
Styphnic acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitroresorcinol,
etc.
Styrene monomer, 3 UN2055 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
stabilized.
G Substances, 1.1L UN0357 II 1.1L...... 101 None.......... 62......... None....... Forbidden Forbidden ............ 8E,
explosive, n.o.s.. 14E,
15E,
17E
G Substances, 1.2L UN0358 II 1.2L...... 101 None.......... 62......... None....... Forbidden Forbidden ............ 8E,
explosive, n.o.s.. 14E,
15E,
17E
[[Page 274]]
G Substances, 1.3L UN0359 II 1.3L...... 101 None.......... 62......... None....... Forbidden Forbidden ............ 8E,
explosive, n.o.s.. 14E,
15E,
17E
G Substances, 1.1A UN0473 II 1.1A...... 101, 111 None.......... 62......... None....... Forbidden Forbidden 12 .......
explosive, n.o.s..
G Substances, 1.1C UN0474 II 1.1C...... 101 None.......... 62......... None....... Forbidden Forbidden 10 .......
explosive, n.o.s..
G Substances, 1.1D UN0475 II 1.1D...... 101 None.......... 62......... None....... Forbidden Forbidden 10 .......
explosive, n.o.s..
G Substances, 1.1G UN0476 II 1.1G...... 101 None.......... 62......... None....... Forbidden Forbidden 08 .......
explosive, n.o.s..
G Substances, 1.3C UN0477 II 1.3C...... 101 None.......... 62......... None....... Forbidden Forbidden 10 .......
explosive, n.o.s..
G Substances, 1.3G UN0478 II 1.3G...... 101 None.......... 62......... None....... Forbidden Forbidden 08 .......
explosive, n.o.s..
G Substances, 1.4C UN0479 II 1.4C...... 101 None.......... 62......... None....... Forbidden 75 kg 09 .......
explosive, n.o.s..
G Substances, 1.4D UN0480 II 1.4D...... 101 None.......... 62......... None....... Forbidden 75 kg 09 .......
explosive, n.o.s..
G Substances, 1.4S UN0481 II 1.4S...... 101 None.......... 62......... None....... 25 kg 75 kg 05 .......
explosive, n.o.s..
G Substances, 1.4G UN0485 II 1.4G...... 101 None.......... 62......... None....... Forbidden 75 kg 08 .......
explosive, n.o.s..
G Substances, 1.5D UN0482 II 1.5D...... 101 None.......... 62......... None....... Forbidden Forbidden 10 .......
explosive, very
insensitive,
n.o.s., or
Substances, EVI,
n.o.s..
Substituted 3 UN2780 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
nitrophenol TP27
pesticides, liquid,
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Substituted 6.1 UN3014 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
nitrophenol TP27
pesticides, liquid,
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Substituted 6.1 UN3013 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
nitrophenol TP27
pesticides, liquid,
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... B1, IB3, T7, 153........... 203........ 242........ 60 L 220 L A 40
TP2, TP28
Substituted 6.1 UN2779 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
nitrophenol TP33
pesticides, solid,
toxic.
[[Page 275]]
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Sucrose octanitrate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Sulfamic acid....... 8 UN2967 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
TP33
D Sulfur.............. 9 NA1350 III 9......... 30, IB8, IP2 None.......... None....... 240........ No Limit No Limit A 19, 74
I Sulfur.............. 4.1 UN1350 III 4.1....... 30, IB8, IP3, None.......... None....... 240........ No limit No limit A 19, 74
T1, TP33
Sulfur and chlorate, Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
loose mixtures of.
Sulfur chlorides.... 8 UN1828 I 8......... 5, A3, A7, A10, None.......... 201........ 243........ Forbidden 2.5 L C 40
B10, B77, N34,
T20, TP2, TP12
Sulfur dichloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sulfur
chlorides.
Sulfur dioxide...... 2.3 UN1079 ....... 2.3, 8.... 3, B14, T50, None.......... 304........ 314, 315... Forbidden Forbidden D 40
TP19
Sulfur dioxide ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Sulfurous acid.
Sulfur hexafluoride. 2.2 UN1080 ....... 2.2....... ................ 306........... 304........ 314, 315... 75 kg 150 kg A .......
D Sulfur, molten...... 9 NA2448 III 9......... 30, IB3, T1, TP3 None.......... 213........ 247........ Forbidden Forbidden C 61
I Sulfur, molten...... 4.1 UN2448 III 4.1....... 30, IB1, T1, TP3 None.......... 213........ 247........ Forbidden Forbidden C 74
Sulfur tetrafluoride 2.3 UN2418 ....... 2.3, 8.... 1 None.......... 302........ 245........ Forbidden Forbidden D 40, 52
+ Sulfur trioxide, 8 UN1829 I 8, 6.1.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden A 40
stabilized. B49, B74, B77,
N34, T20, TP4,
TP12, TP13,
TP25, TP26,
TP38, TP45
Sulfuretted ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrogen, see
Hydrogen sulfide.
Sulfuric acid, 8 UN1831 I 8......... A3, A7, B84, None.......... 201........ 243........ Forbidden 2.5 L C 14, 40
fuming with less N34, T20, TP2,
than 30 percent TP12, TP13
free sulfur
trioxide.
+ Sulfuric acid, 8 UN1831 I 8, 6.1.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden C 14, 40
fuming with 30 B74, B77, B84,
percent or more N34, T20, TP2,
free sulfur TP12, TP13
trioxide.
Sulfuric acid, spent 8 UN1832 II 8......... A3, A7, B2, B83, None.......... 202........ 242........ Forbidden 30 L C 14
B84, IB2, N34,
T8, TP2, TP12
Sulfuric acid with 8 UN1830 II 8......... A3, A7, B3, B83, 154........... 202........ 242........ 1 L 30 L C 14
more than 51 B84, IB2, N34,
percent acid. T8, TP2, TP12
Sulfuric acid with 8 UN2796 II 8......... A3, A7, B2, B15, 154........... 202........ 242........ 1 L 30 L B .......
not more than 51% IB2, N6, N34,
acid. T8, TP2, TP12
[[Page 276]]
Sulfuric and ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
hydrofluoric acid
mixtures, see
Hydrofluoric and
sulfuric acid
mixtures.
Sulfuric anhydride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Sulfur
trioxide,
stabilized.
Sulfurous acid...... 8 UN1833 II 8......... B3, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L B 40
+ Sulfuryl chloride... 8 UN1834 I 8, 6.1.... 1, B6, B9, B10, None.......... 226........ 244........ Forbidden Forbidden C 40
B14, B30, B74,
B77, N34, T22,
TP2, TP12, TP38,
TP44
Sulfuryl fluoride... 2.3 UN2191 ....... 2.3....... 4 None.......... 304........ 314, 315... Forbidden Forbidden D 40
Tars, liquid 3 UN1999 II 3......... 149, B13, IB2, 150........... 202........ 242........ 5 L 60 L B .......
including road T3, TP3, TP29
asphalt and oils,
bitumen and cut
backs.
.................... ........... .................. III 3......... B1, B13, IB3, 150........... 203........ 242........ 60 L 220 L A .......
T1, TP3
Tear gas candles.... 6.1 UN1700 II 6.1, 4.1.. ................ None.......... 340........ None....... Forbidden 50 kg D 40
Tear gas cartridges, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Ammunition,
tear-producing, etc.
D Tear gas devices 6.1 NA1693 I 6.1....... ................ None.......... 340........ None....... Forbidden Forbidden D 40
with more than 2
percent tear gas
substances, by mass.
.................... ........... .................. II 6.1....... ................ None.......... 340........ None....... Forbidden Forbidden D 40
Tear gas devices, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
with not more than
2 percent tear gas
substances, by
mass, see Aerosols,
etc.
Tear gas grenades, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Tear gas
candles.
G Tear gas substances, 6.1 UN1693 I 6.1....... ................ None.......... 201........ None....... Forbidden Forbidden D 40
liquid, n.o.s..
.................... ........... .................. II 6.1....... IB2 None.......... 202........ None....... Forbidden 5 L D 40
G Tear gas substance, 6.1 UN3448 I 6.1....... T6, TP33 None.......... 211........ 242........ Forbidden Forbidden D 40
solid, n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, None.......... 212........ 242........ Forbidden 25 kg D 40
T3, TP33
[[Page 277]]
Tellurium compound, 6.1 UN3284 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg B .......
n.o.s.. TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Tellurium 2.3 UN2195 ....... 2.3, 8.... 1 None.......... 302........ None....... Forbidden Forbidden D 40
hexafluoride.
Terpene 3 UN2319 III 3......... B1, IB3, T4, 150........... 203........ 242........ 60 L 220 L A .......
hydrocarbons, TP1, TP29
n.o.s..
Terpinolene......... 3 UN2541 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Tetraazido benzene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
quinone.
Tetrabromoethane.... 6.1 UN2504 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
1,1,2,2- 6.1 UN1702 II 6.1....... IB2, N36, T7, 153........... 202........ 243........ 5 L 60 L A 40
Tetrachloroethane. TP2
Tetrachloroethylene. 6.1 UN1897 III 6.1....... IB3, N36, T4, 153........... 203........ 241........ 60 L 220 L A 40
TP1
Tetraethyl 6.1 UN1704 II 6.1....... IB2, T7, TP2 153........... 212........ 242........ 25 kg 100 kg D 40
dithiopyrophosphate.
Tetraethyl silicate. 3 UN1292 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Tetraethylammonium Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
perchlorate (dry).
Tetraethylenepentami 8 UN2320 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
ne.
1,1,1,2- 2.2 UN3159 ....... 2.2....... T50 306........... 304........ 314, 315... 75 kg 150 kg A .......
Tetrafluoroethane
or Refrigerant gas
R 134a.
Tetrafluoroethylene, 2.1 UN1081 ....... 2.1....... ................ 306........... 304........ None....... Forbidden 150 kg E 40
stabilized.
Tetrafluoromethane 2.2 UN1982 ....... 2.2....... ................ None.......... 302........ None....... 75 kg 150 kg A .......
or Refrigerant gas
R 14.
1,2,3,6- 3 UN2498 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Tetrahydrobenzaldeh
yde.
Tetrahydrofuran..... 3 UN2056 II 3......... IB2, T4, TP1 None.......... 202........ 242........ 5 L 60 L B .......
Tetrahydrofurfurylam 3 UN2943 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
ine.
Tetrahydrophthalic 8 UN2698 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
anhydrides with TP33
more than 0.05
percent of maleic
anhydride.
1,2,3,6- 3 UN2410 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Tetrahydropyridine.
Tetrahydrothiophene. 3 UN2412 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Tetramethylammonium 8 UN3423 II 8......... B2, IB8, IP2, 154........... 213........ 240........ 15 kg 50 kg A 52
hydroxide, solid. IP4, T3, TP33
Tetramethylammonium 8 UN1835 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L A 52
hydroxide solution.
.................... ........... .................. III 8......... B2, IB3, T7, TP2 154........... 203........ 241........ 5 L 60 L A 52
Tetramethylene Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diperoxide
dicarbamide.
Tetramethylsilane... 3 UN2749 I 3......... A7, T14, TP2 None.......... 201........ 243........ Forbidden 30 L D .......
Tetranitro Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diglycerin.
Tetranitroaniline... 1.1D UN0207 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
+ Tetranitromethane... 5.1 UN1510 I 5.1, 6.1.. 2, B9, B14, B32, None.......... 227........ None....... Forbidden Forbidden D 40, 66
B74, T20, TP2,
TP13, TP38, TP44
2,3,4,6- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Tetranitrophenol.
[[Page 278]]
2,3,4,6- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Tetranitrophenyl
methyl nitramine.
2,3,4,6- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Tetranitrophenylnit
ramine.
Tetranitroresorcinol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
2,3,5,6-Tetranitroso- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1,4-dinitrobenzene.
2,3,5,6-Tetranitroso Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitrobenzene (dry).
Tetrapropylorthotita 3 UN2413 III 3......... B1, IB3, T4, TP1 150........... 203........ 242........ 60 L 220 L A .......
nate.
Tetrazene, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Guanyl
nitrosaminoguanylte
trazene.
Tetrazine (dry)..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Tetrazol-1-acetic 1.4C UN0407 II 1.4C...... ................ None.......... 62......... None....... Forbidden 75 kg 09 .......
acid.
1H-Tetrazole........ 1.1D UN0504 ....... 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden B 1E, 5E
Tetrazolyl azide Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
(dry).
Tetryl, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitrophenylmethy
lnitramine.
A I W Textile waste, wet.. 4.2 UN1857 III 4.2....... ................ 151........... 213........ 240........ Forbidden Forbidden A .......
Thallium chlorate... 5.1 UN2573 II 5.1, 6.1.. IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
TP33
Thallium compounds, 6.1 UN1707 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
n.o.s.. T3, TP33
Thallium nitrate.... 6.1 UN2727 II 6.1, 5.1.. IB6, IP2, T3, 153........... 212........ 242........ 5 kg 25 kg A .......
TP33
4-Thiapentanal...... 6.1 UN2785 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L D 25, 49
Thioacetic acid..... 3 UN2436 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Thiocarbamate 3 UN2772 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
pesticide, liquid, TP27
flammable, toxic,
flash point less
than 23 degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP13, 150........... 202........ 243........ 1 L 60 L B 40
TP27
Thiocarbamate 6.1 UN3005 I 6.1, 3.... T14, TP2, TP13 None.......... 201........ 243........ 1 L 30 L B 40
pesticide, liquid,
toxic, flammable,
flash point not
less than 23
degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1, 3.... IB3, T7, TP2, 153........... 203........ 242........ 60 L 220 L A 40
TP28
[[Page 279]]
Thiocarbamate 6.1 UN3006 I 6.1....... T14, TP2, TP13 None.......... 201........ 243........ 1 L 30 L B 40
pesticide, liquid,
toxic.
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Thiocarbamate 6.1 UN2771 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
pesticides, solid, TP33
toxic.
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Thiocarbonylchloride ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
, see Thiophosgene.
Thioglycol.......... 6.1 UN2966 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Thioglycolic acid... 8 UN1940 II 8......... A7, B2, IB2, 154........... 202........ 242........ 1 L 30 L A .......
N34, T7, TP2
Thiolactic acid..... 6.1 UN2936 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Thionyl chloride.... 8 UN1836 I 8......... B6, B10, N34, None.......... 201........ 243........ Forbidden Forbidden C 40
T10, TP2, TP12,
TP13
Thiophene........... 3 UN2414 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B 40
+ Thiophosgene........ 6.1 UN2474 II 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden B 40, 52
B74, N33, N34,
T20, TP2, TP38,
TP45
Thiophosphoryl 8 UN1837 II 8......... A3, A7, B2, B8, None.......... 202........ 242........ Forbidden 30 L C 40
chloride. B25, IB2, N34,
T7, TP2
Thiourea dioxide.... 4.2 UN3341 II 4.2....... IB6, IP2, T3, None.......... 212........ 241........ 15 kg 50 kg D .......
TP33
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg D .......
TP33
Tin chloride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
fuming, see Stannic
chloride, anhydrous.
Tin perchloride or ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Tin tetrachloride,
see Stannic
chloride, anhydrous.
Tinctures, medicinal 3 UN1293 II 3......... IB2, T4, TP1, 150........... 202........ 242........ 5 L 60 L B .......
TP8
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Tinning flux, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Zinc chloride.
Titanium disulphide. 4.2 UN3174 III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg A .......
TP33
Titanium hydride.... 4.1 UN1871 II 4.1....... A19, A20, IB4, None.......... 212........ 241........ 15 kg 50 kg E .......
N34, T3, TP33
Titanium powder, dry 4.2 UN2546 I 4.2....... ................ None.......... 211........ 242........ Forbidden Forbidden D .......
.................... ........... .................. II 4.2....... A19, A20, IB6, None.......... 212........ 241........ 15 kg 50 kg D .......
IP2, N5, N34,
T3, TP33
[[Page 280]]
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg D .......
TP33
Titanium powder, 4.1 UN1352 II 4.1....... A19, A20, IB6, None.......... 212........ 240........ 15 kg 50 kg E 74
wetted with not IP2, N34, T3,
less than 25 TP33
percent water (a
visible excess of
water must be
present) (a)
mechanically
produced, particle
size less than 53
microns; (b)
chemically
produced, particle
size less than 840
microns.
Titanium sponge 4.1 UN2878 III 4.1....... A1, IB8, IP3, None.......... 213........ 240........ 25 kg 100 kg D 74
granules or T1, TP33
Titanium sponge
powders.
+ Titanium 8 UN1838 II 8, 6.1.... 2, B7, B9, B14, None.......... 227........ 244........ Forbidden Forbidden C 40
tetrachloride. B32, B74, B77,
T20, TP2, TP13,
TP38, TP45
Titanium trichloride 8 UN2869 II 8......... A7, IB8, IP2, 154........... 212........ 240........ 15 kg 50 kg A 40
mixtures. IP4, N34, T3,
TP33
.................... ........... .................. III 8......... A7, IB8, IP3, 154........... 213........ 240........ 25 kg 100 kg A 40
N34, T1, TP33
Titanium 4.2 UN2441 I 4.2, 8.... N34 None.......... 181........ 244........ Forbidden Forbidden D 40
trichloride,
pyrophoric or
Titanium
trichloride
mixtures,
pyrophoric.
TNT mixed with ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
aluminum, see
Tritonal.
TNT, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitrotoluene,
etc.
Toluene............. 3 UN1294 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
+ Toluene diisocyanate 6.1 UN2078 II 6.1....... IB2, T7, TP2, 153........... 202........ 243........ 5 L 60 L D 25, 40
TP13
Toluene sulfonic ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
acid, see Alkyl, or
Aryl sulfonic acid
etc.
+ Toluidines, liquid.. 6.1 UN1708 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Toluidines, solid... 6.1 UN3451 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
2,4- 6.1 UN1709 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
Toluylenediamine, TP33
solid or 2,4-
Toluenediamine,
solid.
2,4-Toluylenediamine 6.1 UN3418 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
solution or 2,4-
Toluenediamine
solution.
[[Page 281]]
Torpedoes, liquid 1.3J UN0450 II 1.3J...... ................ .............. 62......... None....... Forbidden Forbidden 04 23E
fueled, with inert
head.
Torpedoes, liquid 1.1J UN0449 II 1.1J...... ................ .............. 62......... None....... Forbidden Forbidden 04 23E
fueled, with or
without bursting
charge.
Torpedoes with 1.1E UN0329 II 1.1E...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
bursting charge.
Torpedoes with 1.1F UN0330 II 1.1F...... ................ .............. 62......... None....... Forbidden Forbidden 08 .......
bursting charge.
Torpedoes with 1.1D UN0451 II 1.1D...... ................ .............. 62......... None....... Forbidden Forbidden 03 .......
bursting charge.
G Toxic by inhalation 6.1 UN3381 I 6.1....... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
liquid, n.o.s. with B72, T22, TP2,
an inhalation TP13, TP27,
toxicity lower than TP38, TP44
or equal to 200 ml/
m3 and saturated
vapor concentration
greater than or
equal to 500 LC50.
G Toxic by inhalation 6.1 UN3382 I 6.1....... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
liquid, n.o.s. with B74, T20, TP2,
an inhalation TP13, TP27,
toxicity lower than TP38, TP45
or equal to 1000ml/
m3 and saturated
vapor concentration
greater than or
equal to 10 LC50.
G Toxic by inhalation 6.1 UN3383 I 6.1, 3.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
liquid, flammable, B72, T22, TP2,
n.o.s. with an TP13, TP27,
inhalation toxicity TP38, TP44
lower than or equal
to 200 ml/m3 and
saturated vapor
concentration
greater than or
equal to 500 LC50.
G Toxic by inhalation 6.1 UN3384 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
liquid, flammable, B74, T20, TP2,
n.o.s. with an TP13, TP27,
inhalation toxicity TP38, TP45
lower than or equal
to 1000 ml/m3 and
saturated vapor
concentration
greater than or
equal to 10 LC50.
G Toxic by inhalation 6.1 UN3385 I 6.1, 4.3.. 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
liquid, water- B72, T22, TP2,
reactive, n.o.s. TP13, TP38, TP44
with an inhalation
toxicity lower than
or equal to 200 ml/
m3 and saturated
vapor concentration
greater than or
equal to 500 LC50.
G Toxic by inhalation 6.1 UN3386 I 6.1, 4.3.. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
liquid, water- B74, T20, TP2,
reactive, n.o.s. TP13, TP38, TP44
with an inhalation
toxicity lower than
or equal to 1000 ml/
m3 and saturated
vapor concentration
greater than or
equal to 10 LC50.
[[Page 282]]
G Toxic by inhalation 6.1 UN3387 I 6.1, 5.1.. 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
liquid, oxidizing, B72, T22, TP2,
n.o.s. with an TP13, TP38, TP44
inhalation toxicity
lower than or equal
to 200 ml/m3 and
saturated vapor
concentration
greater than or
equal to 500 LC50.
G Toxic by inhalation 6.1 UN3388 I 6.1, 5.1.. 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
liquid, oxidizing, T20, TP2, TP13,
n.o.s. with an TP38, TP44
inhalation toxicity
lower than or equal
to 1000 ml/m3 and
saturated vapor
concentration
greater than or
equal to 10 LC50.
G Toxic by inhalation 6.1 UN3389 I 6.1, 8.... 1, B9, B14, B30, None.......... 226........ 244........ Forbidden Forbidden D 40
liquid, corrosive, B72, T22, TP2,
n.o.s. with an TP13, TP27,
inhalation toxicity TP38, TP44
lower than or equal
to 200 ml/m3 and
saturated vapor
concentration
greater than or
equal to 500 LC50.
G Toxic by inhalation 6.1 UN3390 I 6.1, 8.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
liquid, corrosive, B74, T20, TP2,
n.o.s. with an TP13, TP27,
inhalation toxicity TP38, TP45
lower than or equal
to 1000 ml/m3 and
saturated vapor
concentration
greater than or
equal to 10 LC50.
G Toxic liquid, 6.1 UN3289 I 6.1, 8.... T14, TP2, TP13, None.......... 201........ 243........ 0.5 L 2.5 L A .......
corrosive, TP27
inorganic, n.o.s..
.................... ........... .................. II 6.1, 8.... IB2, T11, TP2, 153........... 202........ 243........ 1 L 30 L A .......
TP27
G Toxic liquid, 6.1 UN3287 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L A .......
inorganic, n.o.s.. TP27
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L A .......
TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A .......
TP28
G Toxic liquids, 6.1 UN2927 I 6.1, 8.... T14, TP2, TP13, None.......... 201........ 243........ 0.5 L 2.5 L B 40
corrosive, organic, TP27
n.o.s..
[[Page 283]]
.................... ........... .................. II 6.1, 8.... IB2, T11, TP2, 153........... 202........ 243........ 1 L 30 L B 40
TP27
G Toxic liquids, 6.1 UN2929 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
flammable, organic, TP27
n.o.s..
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
G Toxic, liquids, 6.1 UN2810 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
organic, n.o.s.. TP27
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP1, 153........... 203........ 241........ 60 L 220 L A 40
TP28
G Toxic liquids, 6.1 UN3122 I 6.1, 5.1.. A4 None.......... 201........ 243........ Forbidden 2.5 L C .......
oxidizing, n.o.s..
.................... ........... .................. II 6.1, 5.1.. IB2 153........... 202........ 243........ 1 L 5 L C .......
G Toxic liquids, water- 6.1 UN3123 I 6.1, 4.3.. A4 None.......... 201........ 243........ Forbidden 1 L E 40
reactive, n.o.s..
.................... ........... .................. II 6.1, 4.3.. IB2 None.......... 202........ 243........ 1 L 5 L E 40
G Toxic solid, 6.1 UN3290 I 6.1, 8.... IB7, T6, TP33 None.......... 211........ 242........ 1 kg 25 kg A .......
corrosive,
inorganic, n.o.s..
.................... ........... .................. II 6.1, 8.... IB6, IP2, T3, 153........... 212........ 242........ 15 kg 50 kg A .......
TP33
G Toxic solid, 6.1 UN3288 I 6.1....... IB7, T6, TP33 None.......... 211........ 242........ 5 kg 50 kg A .......
inorganic, n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
G Toxic solids, 6.1 UN2928 I 6.1, 8.... IB7, T6, TP33 None.......... 211........ 242........ 1 kg 25 kg B 40
corrosive, organic,
n.o.s..
.................... ........... .................. II 6.1, 8.... IB6, IP2, T3, 153........... 212........ 242........ 15 kg 50 kg B 40
TP33
G Toxic solids, 6.1 UN2930 I 6.1, 4.1.. IB6, T6, TP33 None.......... 211........ 242........ 1 kg 15 kg B .......
flammable, organic,
n.o.s..
.................... ........... .................. II 6.1, 4.1.. IB8, IP2, IP4, 153........... 212........ 242........ 15 kg 50 kg B .......
T3, TP33
G Toxic solids, 6.1 UN2811 I 6.1....... IB7, T6, TP33 None.......... 211........ 242........ 5 kg 50 kg B .......
organic, n.o.s..
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
G Toxic solids, 6.1 UN3086 I 6.1, 5.1.. T6, TP33 None.......... 211........ 242........ 1 kg 15 kg C .......
oxidizing, n.o.s..
.................... ........... .................. II 6.1, 5.1.. IB6, IP2, T3, 153........... 212........ 242........ 15 kg 50 kg C .......
TP33
G Toxic solids, self- 6.1 UN3124 I 6.1, 4.2.. A5, T6, TP33 None.......... 211........ 242........ 5 kg 15 kg D 40
heating, n.o.s..
.................... ........... .................. II 6.1, 4.2.. IB6, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg D 40
TP33
[[Page 284]]
G Toxic solids, water- 6.1 UN3125 I 6.1, 4.3.. A5, T6, TP33 None.......... 211........ 242........ 5 kg 15 kg D 40
reactive, n.o.s..
.................... ........... .................. II 6.1, 4.3.. IB6, IP2, T3, 153........... 212........ 242........ 15 kg 50 kg D 40
TP33
G Toxins, extracted 6.1 UN3172 I 6.1....... 141 None.......... 201........ 243........ 1 L 30 L B 40
from living
sources, liquid,
n.o.s..
.................... ........... .................. II 6.1....... 141, IB2 None.......... 202........ 243........ 5 L 60 L B 40
.................... ........... .................. III 6.1....... 141, IB3 153........... 203........ 241........ 60 L 220 L B 40
G Toxins, extracted 6.1 UN3462 I 6.1....... 141, IB7, IP1, None.......... 211........ 243........ 5 kg 50 kg B .......
from living T6, TP33
sources, solid,
n.o.s..
II 6.1....... 141, IB8, IP2, None.......... 212........ 243........ 25 kg 100 kg B .......
IP4, T3 TP33
III 6.1....... 141, IB8, IP3, 153........... 213........ 241........ 100 kg 200 kg A .......
T1 TP33
D Toy Caps............ 1.4S NA0337 II 1.4S...... ................ None.......... 62......... None....... 25 kg 100 kg 05 .......
Tracers for 1.3G UN0212 II 1.3G...... ................ None.......... 62......... None....... Forbidden Forbidden 07 .......
ammunition.
Tracers for 1.4G UN0306 II 1.4G...... ................ None.......... 62......... None....... Forbidden 75 kg 06 .......
ammunition.
Tractors, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Vehicle, etc.
Tri-(b-nitroxyethyl) Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
ammonium nitrate.
Triallyl borate..... 6.1 UN2609 III 6.1....... IB3 153........... 203........ 241........ 60 L 220 L A 13
Triallylamine....... 3 UN2610 III 3, 8...... B1, IB3, T4, TP1 None.......... 203........ 242........ 5 L 60 L A 40
Triazine pesticides, 3 UN2764 I 3, 6.1.... T14, TP2, TP13, None.......... 201........ 243........ Forbidden 30 L B 40
liquid, flammable, TP27
toxic, flash point
less than 23
degrees C.
.................... ........... .................. II 3, 6.1.... IB2, T11, TP2, 150........... 202........ 243........ 1 L 60 L B 40
TP13, TP27
Triazine pesticides, 6.1 UN2998 I 6.1....... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
liquid, toxic. TP27
.................... ........... .................. II 6.1....... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
.................... ........... .................. III 6.1....... IB3, T7, TP2, 153........... 203........ 241........ 60 L 220 L A 40
TP28
Triazine pesticides, 6.1 UN2997 I 6.1, 3.... T14, TP2, TP13, None.......... 201........ 243........ 1 L 30 L B 40
liquid, toxic, TP27
flammable, flash
point not less than
23 degrees C.
.................... ........... .................. II 6.1, 3.... IB2, T11, TP2, 153........... 202........ 243........ 5 L 60 L B 40
TP13, TP27
[[Page 285]]
.................... ........... .................. III 6.1, 3.... IB3, T7, TP2, 153........... 203........ 242........ 60 L 220 L A 40
TP28
Triazine pesticides, 6.1 UN2763 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 40
solid, toxic. TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A 40
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
TP33
Tributylamine....... 6.1 UN2542 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Tributylphosphane... 4.2 UN3254 I 4.2....... T21, TP7, TP33 None.......... 211........ 242........ Forbidden Forbidden D 136
Trichloro-s- ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
triazinetrione dry,
with more than 39
percent available
chlorine, see
Trichloroisocyanuri
c acid, dry.
Trichloroacetic acid 8 UN1839 II 8......... A7, IB8, IP2, 154........... 212........ 240........ 15 kg 50 kg A .......
IP4, N34, T3,
TP33
Trichloroacetic 8 UN2564 II 8......... A3, A6, A7, B2, 154........... 202........ 242........ 1 L 30 L B .......
acid, solution. IB2, N34, T7,
TP2
.................... ........... .................. III 8......... A3, A6, A7, IB3, 154........... 203........ 241........ 5 L 60 L B 8
N34, T4, TP1
+ Trichloroacetyl 8 UN2442 II 8, 6.1.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden D 40
chloride. B74, N34, T20,
TP2, TP38, TP45
Trichlorobenzenes, 6.1 UN2321 III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
liquid.
Trichlorobutene..... 6.1 UN2322 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 25, 40
1,1,1- 6.1 UN2831 III 6.1....... IB3, N36, T4, 153........... 203........ 241........ 60 L 220 L A 40
Trichloroethane. TP1
Trichloroethylene... 6.1 UN1710 III 6.1....... IB3, N36, T4, 153........... 203........ 241........ 60 L 220 L A 40
TP1
Trichloroisocyanuric 5.1 UN2468 II 5.1....... IB8, IP4, T3, 152........... 212........ 240........ 5 kg 25 kg A 13
acid, dry. TP33
Trichloromethyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
perchlorate.
Trichlorosilane..... 4.3 UN1295 I 4.3, 3, 8. N34, T14, TP2, None.......... 201........ 244........ Forbidden Forbidden D 21, 28,
TP7, TP13 40, 49,
100
Tricresyl phosphate 6.1 UN2574 II 6.1....... A3, IB2, N33, 153........... 202........ 243........ 5 L 60 L A .......
with more than 3 N34, T7, TP2
percent ortho
isomer.
Triethyl phosphite.. 3 UN2323 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Triethylamine....... 3 UN1296 II 3, 8...... IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40
Triethylenetetramine 8 UN2259 II 8......... B2, IB2, T7, TP2 154........... 202........ 242........ 1 L 30 L B 40, 52
Trifluoroacetic acid 8 UN2699 I 8......... A3, A6, A7, B4, None.......... 201........ 243........ 0.5 L 2.5 L B 12, 40
N3, N34, N36,
T10, TP2, TP12
Trifluoroacetyl 2.3 UN3057 ....... 2.3, 8.... 2, B7, B9, B14, None.......... 304........ 314, 315... Forbidden Forbidden D 40
chloride. T50, TP21
Trifluorochloroethyl 2.3 UN1082 ....... 2.3, 2.1.. 3, B14, T50 None.......... 304........ 314, 315... Forbidden Forbidden D 40
ene, stabilized.
Trifluoromethane or 2.2 UN1984 ....... 2.2....... ................ 306........... 304........ 314, 315... 75 kg 150 kg A .......
Refrigerant gas R
23.
[[Page 286]]
Trifluoromethane, 2.2 UN3136 ....... 2.2....... T75, TP5 306........... None....... 314, 315... 50 kg 500 kg D .......
refrigerated liquid.
1,1,1- 2.1 UN2035 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
Trifluoroethane or
Refrigerant gas, R
143a.
2- 6.1 UN2942 III 6.1....... IB3 153........... 203........ 241........ 60 L 220 L A .......
Trifluoromethylanil
ine.
3- 6.1 UN2948 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A 40
Trifluoromethylanil
ine.
Triformoxime Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
trinitrate.
Triisobutylene...... 3 UN2324 III 3......... B1, IB3, T4, TP1 150........... 203........ 242........ 60 L 220 L A .......
Triisopropyl borate. 3 UN2616 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L A .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
D Trimethoxysilane.... 6.1 NA9269 I 6.1, 3.... 2, B9, B14, B32, None.......... 227........ 244........ Forbidden Forbidden E 40
B74, T20, TP4,
TP12, TP13,
TP38, TP45
Trimethyl borate.... 3 UN2416 II 3......... IB2, T7, TP1 150........... 202........ 242........ 5 L 60 L B .......
Trimethyl phosphite. 3 UN2329 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
1,3,5-Trimethyl- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
2,4,6-
trinitrobenzene.
Trimethylacetyl 6.1 UN2438 I 6.1, 8, 3. 2, B3, B9, B14, None.......... 227........ 244........ Forbidden Forbidden D 25, 40
chloride. B32, B74, N34,
T20, TP2, TP13,
TP38, TP45
Trimethylamine, 2.1 UN1083 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
anhydrous.
Trimethylamine, 3 UN1297 I 3, 8...... T11, TP1 None.......... 201........ 243........ 0.5 L 2.5 L D 40, 135
aqueous solutions
with not more than
50 percent
trimethylamine by
mass.
.................... ........... .................. II 3, 8...... B1, IB2, T7, TP1 150........... 202........ 243........ 1 L 5 L B 40, 41
.................... ........... .................. III 3, 8...... B1, IB3, T7, TP1 150........... 203........ 242........ 5 L 60 L A 40, 41
1,3,5- 3 UN2325 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Trimethylbenzene.
Trimethylchlorosilan 3 UN1298 II 3, 8...... A3, A7, B77, 150........... 202........ 243........ 1 L 5 L E 40
e. IB2, N34, T7,
TP2, TP13
Trimethylcyclohexyla 8 UN2326 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
mine.
Trimethylene glycol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diperchlorate.
Trimethylhexamethyle 6.1 UN2328 III 6.1....... IB3, T4, TP2, 153........... 203........ 241........ 60 L 220 L B .......
ne diisocyanate. TP13
[[Page 287]]
Trimethylhexamethyle 8 UN2327 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
nediamines.
Trimethylol Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitromethane
trinitrate.
Trinitro-meta-cresol 1.1D UN0216 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
2,4,6-Trinitro-1,3- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
diazobenzene.
2,4,6-Trinitro-1,3,5- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
triazido benzene
(dry).
Trinitroacetic acid. Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitroacetonitrile Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitroamine cobalt Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitroaniline or 1.1D UN0153 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Picramide.
Trinitroanisole..... 1.1D UN0213 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Trinitrobenzene, 4.1 UN3367 I 4.1....... 162, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 36
wetted, with not N41, N84
less than 10%
water, by mass.
Trinitrobenzene, dry 1.1D UN0214 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
or wetted with less
than 30 percent
water, by mass.
Trinitrobenzene, 4.1 UN1354 I 4.1....... 23, A2, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 28
wetted with not N41
less than 30
percent water, by
mass.
Trinitrobenzenesulfo 1.1D UN0386 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
nic acid.
Trinitrobenzoic 1.1D UN0215 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
acid, dry or wetted
with less than 30
percent water, by
mass.
Trinitrobenzoic 4.1 UN3368 I 4.1....... 162, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 36
acid, wetted with N41, N84
not less than 10%
water by mass.
Trinitrobenzoic 4.1 UN1355 I 4.1....... 23, A2, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 28
acid, wetted with N41
not less than 30
percent water, by
mass.
Trinitrochlorobenzen 1.1D UN0155 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
e or Picryl
chloride.
Trinitrochlorobenzen 4.1 UN3365 I 4.1....... 162, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 36
e (picryl N41, N84
chloride), wetted,
with not less than
10% water by mass.
Trinitroethanol..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitroethylnitrate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitrofluorenone.. 1.1D UN0387 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Trinitromethane..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
1,3,5- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Trinitronaphthalene.
Trinitronaphthalene. 1.1D UN0217 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Trinitrophenetole... 1.1D UN0218 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Trinitrophenol 4.1 UN3364 I 4.1....... 162, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 36
(picric acid), N41, N84
wetted, with not
less than 10
percent water by
mass.
Trinitrophenol or 1.1D UN0154 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
Picric acid, dry or
wetted with less
than 30 percent
water, by mass.
[[Page 288]]
Trinitrophenol, 4.1 UN1344 I 4.1....... 23, A8, A19, N41 None.......... 211........ None....... 1 kg 15 kg E 28, 36
wetted with not
less than 30
percent water, by
mass.
2,4,6-Trinitrophenyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
guanidine (dry).
2,4,6-Trinitrophenyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
nitramine.
2,4,6-Trinitrophenyl Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
trimethylol methyl
nitramine
trinitrate (dry).
Trinitrophenylmethyl 1.1D UN0208 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
nitramine or Tetryl.
Trinitroresorcinol 1.1D UN0219 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
or Styphnic acid,
dry or wetted with
less than 20
percent water, or
mixture of alcohol
and water, by mass.
Trinitroresorcinol, 1.1D UN0394 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
wetted or Styphnic
acid, wetted with
not less than 20
percent water, or
mixture of alcohol
and water by mass.
2,4,6-Trinitroso-3- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
methyl
nitraminoanisole.
Trinitrotetramine Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
cobalt nitrate.
Trinitrotoluene and 1.1D UN0388 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Trinitrobenzene
mixtures or TNT and
trinitrobenzene
mixtures or TNT and
hexanitrostilbene
mixtures or
Trinitrotoluene and
hexanitrostilnene
mixtures.
Trinitrotoluene 1.1D UN0389 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
mixtures containing
Trinitrobenzene and
Hexanitrostilbene
or TNT mixtures
containing
trinitrobenzene and
hexanitrostilbene.
Trinitrotoluene or 1.1D UN0209 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
TNT, dry or wetted
with less than 30
percent water, by
mass.
[[Page 289]]
Trinitrotoluene 4.1 UN3366 I 4.1....... 162, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 36
(TNT), wetted, with N41, N84
not less than 10
percent water by
mass.
Trinitrotoluene, 4.1 UN1356 I 4.1....... 23, A2, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 28
wetted with not N41
less than 30
percent water, by
mass.
Tripropylamine...... 3 UN2260 III 3, 8...... B1, IB3, T4, TP1 150........... 203........ 242........ 5 L 60 L A 40
Tripropylene........ 3 UN2057 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Tris-(1- 6.1 UN2501 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
aziridinyl)phosphin
e oxide, solution.
.................... ........... .................. III 6.1....... IB3, T4, TP1 153........... 203........ 241........ 60 L 220 L A .......
Tris, bis- Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
bifluoroamino
diethoxy propane
(TVOPA).
Tritonal............ 1.1D UN0390 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 10 .......
Tungsten 2.3 UN2196 ....... 2.3, 8.... 2 None.......... 338........ None....... Forbidden Forbidden D 40
hexafluoride.
Turpentine.......... 3 UN1299 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Turpentine 3 UN1300 I 3......... T11, TP1, TP8, None.......... 201........ 243........ 1 L 30 L B .......
substitute. TP27
.................... ........... .................. II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Undecane............ 3 UN2330 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Urea hydrogen 5.1 UN1511 III 5.1, 8.... A1, A7, A29, 152........... 213........ 240........ 25 kg 100 kg A 13
peroxide. IB8, IP3, T1,
TP33
Urea nitrate, dry or 1.1D UN0220 II 1.1D...... 119 None.......... 62......... None....... Forbidden Forbidden 10 .......
wetted with less
than 20 percent
water, by mass.
Urea nitrate, 4.1 UN3370 I 4.1....... 162, A8, A19, None.......... 211........ None....... 0.5 kg 0.5 kg E 36
wetted, with not N41, N84
less than 10
percent water by
mass.
Urea nitrate, wetted 4.1 UN1357 I 4.1....... 23, 39, A8, A19, None.......... 211........ None....... 1 kg 15 kg E 28, 36
with not less than N41
20 percent water,
by mass.
Urea peroxide, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Urea hydrogen
peroxide.
Valeraldehyde....... 3 UN2058 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
Valeric acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Corrosive liquids,
n.o.s..
Valeryl chloride.... 8 UN2502 II 8, 3...... A3, A6, A7, B2, 154........... 202........ 243........ 1 L 30 L C 40
IB2, N34, T7,
TP2
Vanadium compound, 6.1 UN3285 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg B .......
n.o.s.. TP33
.................... ........... .................. II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg B .......
T3, TP33
.................... ........... .................. III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A .......
TP33
Vanadium 8 UN2443 II 8......... A3, A6, A7, B2, 154........... 202........ 242........ Forbidden 30 L C 40
oxytrichloride. B16, IB2, N34,
T7, TP2
[[Page 290]]
Vanadium pentoxide, 6.1 UN2862 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 40
non-fused form. TP33
Vanadium 8 UN2444 I 8......... A3, A6, A7, B4, None.......... 201........ 243........ Forbidden 2.5 L C 40
tetrachloride. N34, T10, TP2
Vanadium trichloride 8 UN2475 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A 40
TP33
Vanadyl sulfate..... 6.1 UN2931 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Vehicle, flammable 9 UN3166 ....... 9......... 135, 157 220........... 220........ 220........ Forbidden No limit A .......
gas powered.
Vehicle, flammable 9 UN3166 ....... 9......... 135, 157 220........... 220........ 220........ No limit No limit A .......
liquid powered.
Very signal ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
cartridge, see
Cartridges, signal.
Vinyl acetate, 3 UN1301 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
stabilized.
Vinyl bromide, 2.1 UN1085 ....... 2.1....... T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
stabilized.
Vinyl butyrate, 3 UN2838 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
stabilized.
Vinyl chloride, 2.1 UN1086 ....... 2.1....... 21, B44, T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
stabilized.
Vinyl chloroacetate. 6.1 UN2589 II 6.1, 3.... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Vinyl ethyl ether, 3 UN1302 I 3......... A3, T11, TP2 None.......... 201........ 243........ 1 L 30 L D .......
stabilized.
Vinyl fluoride, 2.1 UN1860 ....... 2.1....... ................ 306........... 304........ 314, 315... Forbidden 150 kg E 40
stabilized.
Vinyl isobutyl 3 UN1304 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
ether, stabilized.
Vinyl methyl ether, 2.1 UN1087 ....... 2.1....... B44, T50 306........... 304........ 314, 315... Forbidden 150 kg B 40
stabilized.
Vinyl nitrate Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
polymer.
Vinylidene chloride, 3 UN1303 I 3......... T12, TP2, TP7 150........... 201........ 243........ 1 L 30 L E 40
stabilized.
Vinylpyridines, 6.1 UN3073 II 6.1, 3, 8. IB1, T7, TP2, 153........... 202........ 243........ 1 L 30 L B 40
stabilized. TP13
Vinyltoluenes, 3 UN2618 III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
stabilized.
Vinyltrichlorosilane 3 UN1305 I 3, 8...... A3, A7, B6, N34, None.......... 201........ 243........ Forbidden 2.5 L B 40
, stabilized. T11, TP2, TP13
Warheads, rocket 1.4D UN0370 II 1.4D...... ................ None.......... 62......... None....... Forbidden 75 kg 02 .......
with burster or
expelling charge.
Warheads, rocket 1.4F UN0371 II 1.4F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
with burster or
expelling charge.
Warheads, rocket 1.1D UN0286 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
with bursting
charge.
[[Page 291]]
Warheads, rocket 1.2D UN0287 II 1.2D...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
with bursting
charge.
Warheads, rocket 1.1F UN0369 II 1.1F...... ................ None.......... 62......... None....... Forbidden Forbidden 08 .......
with bursting
charge.
Warheads, torpedo 1.1D UN0221 II 1.1D...... ................ None.......... 62......... None....... Forbidden Forbidden 03 .......
with bursting
charge.
G Water-reactive 4.3 UN3129 I 4.3, 8.... ................ None.......... 201........ 243........ Forbidden 1 L D .......
liquid, corrosive,
n.o.s..
.................... ........... .................. II 4.3, 8.... IB1 None.......... 202........ 243........ 1 L 5 L E 85
.................... ........... .................. III 4.3, 8.... IB2 None.......... 203........ 242........ 5 L 60 L E .......
G Water-reactive 4.3 UN3148 I 4.3....... ................ None.......... 201........ 244........ Forbidden 1 L E 40
liquid, n.o.s..
.................... ........... .................. II 4.3....... IB1 None.......... 202........ 243........ 1 L 5 L E 40
.................... ........... .................. III 4.3....... IB2 None.......... 203........ 242........ 5 L 60 L E 40
G Water-reactive 4.3 UN3130 I 4.3, 6.1.. A4 None.......... 201........ 243........ Forbidden 1 L D .......
liquid, toxic,
n.o.s..
.................... ........... .................. II 4.3, 6.1.. IB1 None.......... 202........ 243........ 1 L 5 L E 85
.................... ........... .................. III 4.3, 6.1.. IB2 None.......... 203........ 242........ 5 L 60 L E 85
G Water-reactive 4.3 UN3131 I 4.3, 8.... IB4, IP1, N40 None.......... 211........ 242........ Forbidden 15 kg D .......
solid, corrosive,
n.o.s..
.................... ........... .................. II 4.3, 8.... IB6, IP2, T3, 151........... 212........ 242........ 15 kg 50 kg E 85
TP33
.................... ........... .................. III 4.3, 8.... IB8, IP4, T1, 151........... 213........ 241........ 25 kg 100 kg E 85
TP33
G Water-reactive 4.3 UN3132 I 4.3, 4.1.. IB4, N40 None.......... 211........ 242........ Forbidden 15 kg D .......
solid, flammable,
n.o.s..
.................... ........... .................. II 4.3, 4.1.. IB4, T3, TP33 151........... 212........ 242........ 15 kg 50 kg E .......
.................... ........... .................. III 4.3, 4.1.. IB6, T1, TP33 151........... 213........ 241........ 25 kg 100 kg E .......
G Water-reactive 4.3 UN2813 I 4.3....... IB4, N40 None.......... 211........ 242........ Forbidden 15 kg E 40
solid, n.o.s..
.................... ........... .................. II 4.3....... IB7, IP2, T3, 151........... 212........ 242........ 15 kg 50 kg E 40
TP33
.................... ........... .................. III 4.3....... IB8, IP4, T1, 151........... 213........ 241........ 25 kg 100 kg E 40
TP33
G Water-reactive, 4.3 UN3133 II 4.3, 5.1.. ................ None.......... 214........ 214........ Forbidden Forbidden E 40
solid, oxidizing,
n.o.s..
.................... ........... .................. III 4.3, 5.1.. ................ None.......... 214........ 214........ Forbidden Forbidden E 40
G Water-reactive 4.3 UN3135 I 4.3, 4.2.. N40 None.......... 211........ 242........ Forbidden 15 kg E .......
solid, self-
heating, n.o.s..
.................... ........... .................. II 4.3, 4.2.. IB5, IP2, T3, None.......... 212........ 242........ 15 kg 50 kg E .......
TP33
.................... ........... .................. III 4.3, 4.2.. IB8, IP4, T1, None.......... 213........ 241........ 25 kg 100 kg E .......
TP33
G Water-reactive 4.3 UN3134 I 4.3, 6.1.. A8, IB4, IP1, None.......... 211........ 242........ Forbidden 15 kg D .......
solid, toxic, N40
n.o.s..
.................... ........... .................. II 4.3, 6.1.. IB5, IP2, T3, 151........... 212........ 242........ 15 kg 50 kg E 85
TP33
[[Page 292]]
.................... ........... .................. III 4.3, 6.1.. IB8, IP4, T1, 151........... 213........ 241........ 25 kg 100 kg E 85
TP33
Wheel chair, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
electric, see
Battery powered
vehicle or Battery
powered equipment.
White acid, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Hydrofluoric acid.
I White asbestos 9 UN2590 III 9......... 156, IB8, IP2, 155........... 216........ 240........ 200 kg 200 kg A 34, 40
(chrysotile, IP3, T1, TP33
actinolite,
anthophyllite,
tremolite).
Wood preservatives, 3 UN1306 II 3......... 149, IB2, T4, 150........... 202........ 242........ 5 L 60 L B .......
liquid. TP1, TP8
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A 40
A I W Wool waste, wet..... 4.2 UN1387 III 4.2....... ................ 151........... 213........ 240........ Forbidden Forbidden A .......
Xanthates........... 4.2 UN3342 II 4.2....... IB6, IP2, T3, None.......... 212........ 241........ 15 kg 50 kg D 40
TP33
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg D 40
TP33
Xenon............... 2.2 UN2036 ....... 2.2....... ................ 306........... 302........ None....... 75 kg 150 kg A .......
Xenon, refrigerated 2.2 UN2591 ....... 2.2....... T75, TP5 320........... None....... None....... 50 kg 500 kg B .......
liquid (cryogenic
liquids).
Xylenes............. 3 UN1307 II 3......... IB2, T4, TP1 150........... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB3, T2, TP1 150........... 203........ 242........ 60 L 220 L A .......
Xylenols, solid..... 6.1 UN2261 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Xylenols, liquid.... 6.1 UN3430 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Xylidines, liquid... 6.1 UN1711 II 6.1....... IB2, T7, TP2 153........... 202........ 243........ 5 L 60 L A .......
Xylidines, solid.... 6.1 UN3452 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
T3, TP33
Xylyl bromide, 6.1 UN1701 II 6.1....... A3, A6, A7, IB2, None.......... 340........ None....... Forbidden 60 L D 40
liquid. N33, T7, TP2,
TP13
Xylyl bromide, solid 6.1 UN3417 II 6.1....... A3, A6, A7, IB8, None.......... 340........ None....... 25 kg 100 kg B 40
IP2, IP4, N33,
T3, TP33
p-Xylyl diazide..... Forbidden .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Zinc ammonium 5.1 UN1512 II 5.1....... IB8, IP4, T3, None.......... 212........ 242........ 5 kg 25 kg E .......
nitrite. TP33
[[Page 293]]
Zinc arsenate or 6.1 UN1712 II 6.1....... IB8, IP2, IP4, 153........... 212........ 242........ 25 kg 100 kg A .......
Zinc arsenite or T3, TP33
Zinc arsenate and
zinc arsenite
mixtures.
Zinc ashes.......... 4.3 UN1435 III 4.3....... A1, A19, IB8, 151........... 213........ 241........ 25 kg 100 kg A .......
IP4, T1, TP33
Zinc bisulfite ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see
Bisulfites, aqueous
solutions, n.o.s..
Zinc bromate........ 5.1 UN2469 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A 56, 58
IP3, T1, TP33
Zinc chlorate....... 5.1 UN1513 II 5.1....... A9, IB8, IP2, 152........... 212........ 242........ 5 kg 25 kg A 56, 58
IP4, N34, T3,
TP33
Zinc chloride, 8 UN2331 III 8......... IB8, IP3, T1, None.......... 213........ 240........ 25 kg 100 kg A .......
anhydrous. TP33
Zinc chloride, 8 UN1840 III 8......... IB3, T4, TP1 154........... 203........ 241........ 5 L 60 L A .......
solution.
Zinc cyanide........ 6.1 UN1713 I 6.1....... IB7, IP1, T6, None.......... 211........ 242........ 5 kg 50 kg A 52
TP33
Zinc dithionite or 9 UN1931 III None...... IB8, IP3, T1, 155........... 204........ 240........ 100 kg 200 kg A 49
Zinc hydrosulfite. TP33
Zinc ethyl, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Diethylzinc.
Zinc fluorosilicate. 6.1 UN2855 III 6.1....... IB8, IP3, T1, 153........... 213........ 240........ 100 kg 200 kg A 52
TP33
Zinc hydrosulfite, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Zinc dithionite.
Zinc muriate ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
solution, see Zinc
chloride, solution.
Zinc nitrate........ 5.1 UN1514 II 5.1....... IB8, IP4, T3, 152........... 212........ 240........ 5 kg 25 kg A .......
TP33
Zinc permanganate... 5.1 UN1515 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg D 56, 58,
TP33 138
Zinc peroxide....... 5.1 UN1516 II 5.1....... IB6, IP2, T3, 152........... 212........ 242........ 5 kg 25 kg A 13, 52,
TP33 66, 75
Zinc phosphide...... 4.3 UN1714 I 4.3, 6.1.. A19, N40 None.......... 211........ None....... Forbidden 15 kg E 40, 52,
85
Zinc powder or Zinc 4.3 UN1436 I 4.3, 4.2.. A19, IB4, IP1, None.......... 211........ 242........ Forbidden 15 kg A 52, 53
dust. N40
.................... ........... .................. II 4.3, 4.2.. A19, IB7, IP2, None.......... 212........ 242........ 15 kg 50 kg A 52, 53
T3, TP33
.................... ........... .................. III 4.3, 4.2.. IB8, IP4, T1, None.......... 213........ 242........ 25 kg 100 kg A 52, 53
TP33
Zinc resinate....... 4.1 UN2714 III 4.1....... A1, IB6, T1, 151........... 213........ 240........ 25 kg 100 kg A .......
TP33
Zinc selenate, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Selenates or
Selenites.
Zinc selenite, see ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
Selenates or
Selenites.
Zinc silicofluoride, ........... .................. ....... .......... ................ .............. ........... ........... ........... ........... ............ .......
see Zinc
fluorosilicate.
[[Page 294]]
Zirconium, dry, 4.1 UN2858 III 4.1....... A1 151........... 213........ 240........ 25 kg 100 kg A .......
coiled wire,
finished metal
sheets, strip
(thinner than 254
microns but not
thinner than 18
microns).
Zirconium, dry, 4.2 UN2009 III 4.2....... A1, A19 None.......... 213........ 240........ 25 kg 100 kg D .......
finished sheets,
strip or coiled
wire.
Zirconium hydride... 4.1 UN1437 II 4.1....... A19, A20, IB4, None.......... 212........ 240........ 15 kg 50 kg E .......
N34, T3, TP33
Zirconium nitrate... 5.1 UN2728 III 5.1....... A1, A29, IB8, 152........... 213........ 240........ 25 kg 100 kg A .......
IP3, T1, TP33
Zirconium picramate, 1.3C UN0236 II 1.3C...... ................ None.......... 62......... None....... Forbidden Forbidden 10 5E
dry or wetted with
less than 20
percent water, by
mass.
Zirconium picramate, 4.1 UN1517 I 4.1....... 23, N41 None.......... 211........ None....... 1 kg 15 kg D 28, 36
wetted with not
less than 20
percent water, by
mass.
Zirconium powder, 4.2 UN2008 I 4.2....... T21, TP7, TP33 None.......... 211........ 242........ Forbidden Forbidden D .......
dry.
.................... ........... .................. II 4.2....... A19, A20, IB6, None.......... 212........ 241........ 15 kg 50 kg D .......
IP2, N5, N34,
T3, TP33
.................... ........... .................. III 4.2....... IB8, IP3, T1, None.......... 213........ 241........ 25 kg 100 kg D .......
TP33
Zirconium powder, 4.1 UN1358 II 4.1....... A19, A20, IB6, None.......... 212........ 241........ 15 kg 50 kg E 74
wetted with not IP2, N34, T3,
less than 25 TP33
percent water (a
visible excess of
water must be
present) (a)
mechanically
produced, particle
size less than 53
microns; (b)
chemically
produced, particle
size less than 840
microns.
Zirconium scrap..... 4.2 UN1932 III 4.2....... IB8, IP3, N34, None.......... 213........ 240........ Forbidden Forbidden D .......
T1, TP33
Zirconium suspended 3 UN1308 I 3......... ................ None.......... 201........ 243........ Forbidden Forbidden B .......
in a liquid.
.................... ........... .................. II 3......... IB2 None.......... 202........ 242........ 5 L 60 L B .......
.................... ........... .................. III 3......... B1, IB2 150........... 203........ 242........ 60 L 220 L B .......
Zirconium 8 UN2503 III 8......... IB8, IP3, T1, 154........... 213........ 240........ 25 kg 100 kg A .......
tetrachloride. TP33
[[Page 295]]
Appendix A to Sec. 172.101--List of Hazardous Substances and Reportable
Quantities
1. This appendix lists materials and their corresponding reportable
quantities (RQ's) that are listed or designated as ``hazardous
substances'' under section 101(14) of the Comprehensive Environmental
Response, Compensation, and Liability Act, 42 U.S.C. 9601(14) (CERCLA;
42 U.S.C. 9601 et seq). This listing fulfills the requirement of CERCLA,
42 U.S.C. 9656(a), that all ``hazardous substances,'' as defined in 42
U.S.C. 9601(14), be listed and regulated as hazardous materials under 49
U.S.C. 5101-5127. That definition includes substances listed under
sections 311(b)(2)(A) and 307(a) of the Federal Water Pollution Control
Act, 33 U.S.C. 1321(b)(2)(A) and 1317(a), section 3001 of the Solid
Waste Disposal Act, 42 U.S.C. 6921, and section 112 of the Clean Air
Act, 42 U.S.C. 7412. In addition, this list contains materials that the
Administrator of the Environmental Protection Agency has determined to
be hazardous substances in accordance with section 102 of CERCLA, 42
U.S.C. 9602. It should be noted that 42 U.S.C. 9656(b) provides that
common and contract carriers may be held liable under laws other than
CERCLA for the release of a hazardous substance as defined in that Act,
during transportation that commenced before the effective date of the
listing and regulating of that substance as a hazardous material under
49 U.S.C. 5101-5127.
2. This appendix is divided into two TABLES which are entitled
``TABLE 1--HAZARDOUS SUBSTANCES OTHER THAN RADIONUCLIDES'' and ``TABLE
2--RADIONUCLIDES.'' A material listed in this appendix is regulated as a
hazardous material and a hazardous substance under this subchapter if it
meets the definition of a hazardous substance in Sec. 171.8 of this
subchapter.
3. The procedure for selecting a proper shipping name for a
hazardous substance is set forth in Sec. 172.101(c).
4. Column 1 of TABLE 1, entitled ``Hazardous substance'', contains
the names of those elements and compounds that are hazardous substances.
Following the listing of elements and compounds is a listing of waste
streams. These waste streams appear on the list in numerical sequence
and are referenced by the appropriate ``D'', ``F'', or ``K'' numbers.
Column 2 of TABLE 1, entitled ``Reportable quantity (RQ)'', contains the
reportable quantity (RQ), in pounds and kilograms, for each hazardous
substance listed in Column 1 of TABLE 1.
5. A series of notes is used throughout TABLE 1 and TABLE 2 to
provide additional information concerning certain hazardous substances.
These notes are explained at the end of each TABLE.
6. TABLE 2 lists radionuclides that are hazardous substances and
their corresponding RQ's. The RQ's in table 2 for radionuclides are
expressed in units of curies and terabecquerels, whereas those in table
1 are expressed in units of pounds and kilograms. If a material is
listed in both table 1 and table 2, the lower RQ shall apply.
Radionuclides are listed in alphabetical order. The RQ's for
radionuclides are given in the radiological unit of measure of curie,
abbreviated ``Ci'', followed, in parentheses, by an equivalent unit
measured in terabecquerels, abbreviated ``TBq''.
7. For mixtures of radionuclides, the following requirements shall
be used in determining if a package contains an RQ of a hazardous
substance: (i) if the identity and quantity (in curies or
terabecquerels) of each radionuclide in a mixture or solution is known,
the ratio between the quantity per package (in curies or terabecquerels)
and the RQ for the radionuclide must be determined for each
radionuclide. A package contains an RQ of a hazardous substance when the
sum of the ratios for the radionuclides in the mixture or solution is
equal to or greater than one; (ii) if the identity of each radionuclide
in a mixture or solution is known but the quantity per package (in
curies or terabecquerels) of one or more of the radionuclides is
unknown, an RQ of a hazardous substance is present in a package when the
total quantity (in curies or terabecquerels) of the mixture or solution
is equal to or greater than the lowest RQ of any individual radionuclide
in the mixture or solution; and (iii) if the identity of one or more
radionuclides in a mixture or solution is unknown (or if the identity of
a radionuclide by itself is unknown), an RQ of a hazardous substance is
present when the total quantity (in curies or terabecquerels) in a
package is equal to or greater than either one curie or the lowest RQ of
any known individual radionuclide in the mixture or solution, whichever
is lower.
Table 1 to Appendix A--Hazardous Substances Other Than Radionuclides
------------------------------------------------------------------------
Reportable
quantity (RQ)
Hazardous substance pounds
(kilograms)
------------------------------------------------------------------------
Acenaphthene............................................ 100 (45.4)
Acenaphthylene.......................................... 5000 (2270)
Acetaldehyde............................................ 1000 (454)
Acetaldehyde, chloro-................................... 1000 (454)
Acetaldehyde, trichloro-................................ 5000 (2270)
[[Page 296]]
Acetamide............................................... 100 (45.4)
Acetamide, N-(aminothioxomethyl)-....................... 1000 (454)
Acetamide, N-(4-ethoxyphenyl)-.......................... 100 (45.4)
Acetamide, N-fluoren-2-yl-.............................. 1 (0.454)
Acetamide, 2-fluoro-.................................... 100 (45.4)
Acetic acid............................................. 5000 (2270)
Acetic acid (2,4-dichlorophenoxy)-...................... 100 (45.4)
Acetic acid, ethyl ester................................ 5000 (2270)
Acetic acid, fluoro-, sodium salt....................... 10 (4.54)
Acetic acid, lead (2+) salt............................. 10 (4.54)
Acetic acid, thallium(I+) salt.......................... 1000 (454)
Acetic anhydride........................................ 5000 (2270)
Acetone................................................. 5000 (2270)
Acetone cyanohydrin..................................... 10 (4.54)
Acetonitrile............................................ 5000 (2270)
Acetophenone............................................ 5000 (2270)
2-Acetylaminofluorene................................... 1 (0.454)
Acetyl bromide.......................................... 5000 (2270)
Acetyl chloride......................................... 5000 (2270)
1-Acetyl-2-thiourea..................................... 1 (0.454)
Acrolein................................................ 1(0.454)
Acrylamide.............................................. 5000 (2270)
Acrylic acid............................................ 5000 (2270)
Acrylonitrile........................................... 100 (45.4)
Adipic acid............................................. 5000 (2270)
AldicarbD1 (0.454)......................................
Aldrin.................................................. 1 (0.454)
Allyl alcohol........................................... 100 (45.4)
Allyl chloride.......................................... 1000 (454)
Aluminum phosphide...................................... 100 (45.4)
Aluminum sulfate........................................ 5000 (2270)
4-Aminobiphenyl......................................... 1 (0.454)
5-(Aminomethyl)-3-isoxazolol............................ 1000 (454)
4-Aminopyridine......................................... 1000 (454)
Amitrole................................................ 10 (4.54)
Ammonia................................................. 100 (45.4)
Ammonium acetate........................................ 5000 (2270)
Ammonium benzoate....................................... 5000 (2270)
Ammonium bicarbonate.................................... 5000 (2270)
Ammonium bichromate..................................... 10 (4.54)
Ammonium bifluoride..................................... 100 (45.4)
Ammonium bisulfite...................................... 5000 (2270)
Ammonium carbamate...................................... 5000 (2270)
Ammonium carbonate...................................... 5000 (2270)
Ammonium chloride....................................... 5000 (2270)
Ammonium chromate....................................... 10 (4.54)
Ammonium citrate, dibasic............................... 5000 (2270)
Ammonium dichromate @................................... 10 (4.54)
Ammonium fluoborate..................................... 5000 (2270)
Ammonium fluoride....................................... 100 (45.4)
Ammonium hydroxide...................................... 1000 (454)
Ammonium oxalate........................................ 5000 (2270)
Ammonium picrate........................................ 10 (4.54)
Ammonium silicofluoride................................. 1000 (454)
Ammonium sulfamate...................................... 5000 (2270)
Ammonium sulfide........................................ 100 (45.4)
Ammonium sulfite........................................ 5000 (2270)
Ammonium tartrate....................................... 5000 (2270)
Ammonium thiocyanate.................................... 5000 (2270)
Ammonium vanadate....................................... 1000 (454)
Amyl acetate............................................ 5000 (2270)
iso-Amyl acetate.................................... ..............
sec-Amyl acetate.................................... ..............
tert-Amyl acetate................................... ..............
Aniline................................................. 5000 (2270)
o-Anisidine............................................. 100 (45.4)
Anthracene.............................................. 5000 (2270)
Antimony [cent]......................................... 5000 (2270)
Antimony pentachloride.................................. 1000 (454)
Antimony potassium tartrate............................. 100 (45.4)
[[Page 297]]
Antimony tribromide..................................... 1000 (454)
Antimony trichloride.................................... 1000 (454)
Antimony trifluoride.................................... 1000 (454)
Antimony trioxide....................................... 1000 (454)
Argentate(1-), bis(cyano-C)-, potassium................. 1 (0.454)
Aroclor 1016............................................ 1 (0.454)
Aroclor 1221............................................ 1 (0.454)
Aroclor 1232............................................ 1 (0.454)
Aroclor 1242............................................ 1 (0.454)
Aroclor 1248............................................ 1 (0.454)
Aroclor 1254............................................ 1 (0.454)
Aroclor 1260............................................ 1 (0.454)
Arsenic [cent].......................................... 1 (0.454)
Arsenic acid............................................ 1 (0.454)
Arsenic acid H3AsO4..................................... 1 (0.454)
Arsenic disulfide....................................... 1 (0.454)
Arsenic oxide As203..................................... 1 (0.454)
Arsenic oxide As205..................................... 1 (0.454)
Arsenic pentoxide....................................... 1 (0.454)
Arsenic trichloride..................................... 1 (0.454)
Arsenic trioxide........................................ 1 (0.454)
Arsenic trisulfide...................................... 1 (0.454)
Arsine, diethyl-........................................ 1 (0.454)
Arsinic acid, dimethyl-................................. 1 (0.454)
Arsonous dichloride, phenyl-............................ 1 (0.454)
Asbestos [cent][cent]................................... 1 (0.454)
Auramine100 (45.4)......................................
Azaserine............................................... 1 (0.454)
Aziridine............................................... 1 (0.454)
Aziridine, 2-methyl-.................................... 1 (0.454)
Azirino[2',3':3,4]pyrrolo(1,2-a)indole-4,7-dione,6- 10 (4.54)
amino-8-[[(aminocarbonyl)oxy] methyl]-1,1a,2,8,8a, 8b-
hexahydro-8a-methoxy-5-methyl-, [1aS-
[aalpha,8beta,8aalpha,8balpha)]-.......................
Barium cyanide.......................................... 10 (4.54)
Benz[j]aceanthrylene, 1,2-dihydro-3-methyl-............. 10 (4.54)
Benz[c]acridine......................................... 100 (45.4)
3,4-Benzacridine........................................ 100 (45.4)
Benzal chloride......................................... 5000 (2270)
Benzamide, 3,5-dichloro-N-(1,1-dimethyl-2-propynyl)..... 5000 (2270)
Benz[a]anthracene....................................... 10 (4.54)
1,2-Benzanthracene...................................... 10 (4.54)
Benz[a]anthracene, 7,12-dimethyl-....................... 1 (0.454)
Benzenamine............................................. 5000 (2270)
Benzenamine, 4,4'-carbonimidoylbis (N,N-dimethyl-....... 100 (45.4)
Benzenamine, 4-chloro-.................................. 1000 (454)
Benzenamine, 4-chloro-2-methyl-, hydrochloride.......... 100 (45.4)
Benzenamine, N,N-dimethyl-4-(phenylazo)-................ 10 (4.54)
Benzenamine, 2-methyl-.................................. 100 (45.4)
Benzenamine, 4-methyl-.................................. 100 (45.4)
Benzenamine, 4,4'-methylenebis(2-chloro-................ 10 (4.54)
Benzenamine, 2-methyl-, hydrochloride................... 100 (45.4)
Benzenamine, 2-methyl-5-nitro-.......................... 100 (45.4)
Benzenamine, 4-nitro-................................... 5000 (2270)
Benzene................................................. 10 (4.54)
Benzene, 1-bromo-4-phenoxy-............................. 100 (45.4)
Benzene, chloro-........................................ 100 (45.4)
Benzene, chloromethyl-.................................. 100 (45.4)
Benzene, 1,2-dichloro-.................................. 100 (45.4)
Benzene, 1,3-dichloro-.................................. 100 (45.4)
Benzene, 1,4-dichloro-.................................. 100 (45.4)
Benzene, 1,1'-(2,2-dichloroethylidene)bis[4-chloro...... 1 (0.454)
Benzene, dichloromethyl-................................ 5000 (2270)
Benzene, 1,3-diisocyanatomethyl......................... 100 (45.4)
Benzene, dimethyl-...................................... 100 (45.4)
Benzene, m-dimethyl-.................................... 1000 (454)
Benzene, o-dimethyl-.................................... 1000 (454)
Benzene, p-dimethyl-.................................... 100 (45.4)
Benzene, hexachloro-.................................... 10 (4.54)
Benzene, hexahydro-..................................... 1000 (454)
Benzene, hydroxy-....................................... 1000 (454)
Benzene, methyl-........................................ 1000 (454)
[[Page 298]]
Benzene, 1-methyl-2,4-dinitro-.......................... 10 (4.54)
Benzene, 2-methyl-1,3-dinitro-.......................... 100 (45.4)
Benzene, 1-methylethyl-................................. 5000 (2270)
Benzene, nitro-......................................... 1000 (454)
Benzene, pentachloro-................................... 10 (4.54)
Benzene, pentachloronitro-.............................. 100 (45.4)
Benzene, 1,2,4,5-tetrachloro-........................... 5000 (2270)
Benzene, 1,1'-(2,2,2-trichloroethylidene)bis[4-chloro-.. 1 (0.454)
Benzene, 1,1'-(2,2,2-trichloroethylidene)bis[4-methoxy)- 1 (0.454)
Benzene, (trichloromethyl).............................. 10 (4.54)
Benzene, 1,3,5-trinitro-................................ 10 (4.54)
Benzeneacetic acid, 4-chloro-alpha-(4-chlorophenyl)- 10 (4.54)
alpha-hydroxy-, ethyl ester............................
Benzenebutanoic acid, 4-[bis(2-chloroethyl)amino]-...... 10 (4.54)
Benzenediamine, ar-methyl-.............................. 10 (4.54)
1,2-Benzenedicarboxylic acid, [bis(2-ethylhexyl)] ester. 100 (45.4)
1,2-Benzenedicarboxylic acid, dibutyl ester............. 10 (4.54)
1,2-Benzenedicarboxylic acid, diethyl ester............. 1000 (454)
1,2-Benzenedicarboxylic acid, dimethyl ester............ 5000 (2270)
1,2-Benzenedicarboxylic acid, dioctyl ester............. 5000 (2270)
1,3-Benzenediol......................................... 5000 (2270)
1,2-Benzenediol,4-[1-hydroxy-2-(methylamino)ethyl]-..... 1000 (454)
Benzeneethanamine, alpha,alpha-dimethyl-................ 5000 (2270)
Benzenesulfonic acid chloride........................... 100 (45.4)
Benzenesulfonyl chloride................................ 100 (45.4)
Benzenethiol............................................ 100 (45.4)
Benzidine............................................... 1 (0.454)
1,2-Benzisothiazol-3(2H)-one,1,1-dioxide................ 100 (45.4)
Benzo[a]anthracene...................................... 10 (4.54)
1,3-Benzodioxole, 5-(2-propenyl)-....................... 100 (45.4)
1,3-Benzodioxole, 5-(1-propenyl)-....................... 100 (45.4)
1,3-Benzodioxole, 5-propyl-............................. 10 (4.54)
Benzo[b]fluoranthene.................................... 1 (0.454)
Benzo[k]fluoranthene.................................... 5000 (2270)
Benzo[j,k]fluorene...................................... 100 (45.4)
Benzoic acid............................................ 5000 (2270)
Benzonitrile............................................ 5000 (2270)
Benzo[g,h,i]perylene.................................... 5000 (2270)
2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenyl- 100 (45.4)
butyl)-, & salts, when present at concentrations
greater than 0.3%......................................
Benzo[a]pyrene.......................................... 1 (0.454)
3,4-Benzopyrene......................................... 1 (0.454)
p-Benzoquinone.......................................... 10 (4.54)
Benzo [rst]pentaphene................................... 10 (4.54)
Benzotrichloride........................................ 10 (4.54)
Benzoyl chloride........................................ 1000 (454)
1,2-Benzphenanthrene.................................... 100 (45.4)
Benzyl chloride......................................... 100 (45.4)
Beryllium [cent]........................................ 10 (4.54)
Beryllium chloride...................................... 1 (0.454)
Beryllium dust [cent]................................... 10 (4.54)
Beryllium fluoride...................................... 1 (0.454)
Beryllium nitrate....................................... 1 (0.454)
alpha - BHC............................................. 10 (4.54)
beta - BHC.............................................. 1 (0.454)
delta - BHC............................................. 1 (0.454)
gamma - BHC............................................. 1 (0.454)
2,2'Bioxirane........................................... 10 (4.54)
Biphenyl................................................ 100 (45.4)
(1,1'-Biphenyl)-4,4'-diamine............................ 1 (0.454)
(1,1'-Biphenyl)-4,4'-diamine,3,3'-dichloro-............. 1 (0.454)
(1,1'-Biphenyl)-4,4'-diamine,3,3'-dimethoxy-............ 10 (4.54)
(1,1'-Biphenyl)-4,4'-diamine,3,3'-dimethyl-............. 10 (4.54)
Bis(2-chloroethoxy) methane............................. 1000 (454)
Bis(2-chloroethyl) ether................................ 10 (4.54)
Bis(2-ethylhexyl)phthalate.............................. 100 (45.4)
Bromoacetone............................................ 1000 (454)
Bromoform............................................... 100 (45.4)
4-Bromophenyl phenyl ether.............................. 100 (45.4)
Brucine................................................. 100 (45.4)
1,3-Butadiene........................................... 10 (4.54)
[[Page 299]]
1,3-Butadiene, 1,1,2,3,4,4-hexachloro-.................. 1 (0.454)
1-Butanamine, N-butyl-N-nitroso-........................ 10 (4.54)
1-Butanol............................................... 5000 (2270)
2-Butanone.............................................. 5000 (2270)
2-Butanone, 3,3-dimethyl-1-(methylthio)-,O- 100 (45.4)
[(methylamino)carbonyl] oxime..........................
2-Butanone peroxide..................................... 10 (4.54)
2-Butenal............................................... 100 (45.4)
2-Butene, 1,4-dichloro-................................. 1 (0.454)
2-Butenoic acid, 2-methyl-,7[[2,3-dihydroxy-2-(1- 10 (4.54)
methoxyethyl)-3-methyl-1-oxobutoxy]methyl]-2,3,5,7a-
tetrahydro-1H-pyrrolizin-1-yl ester, [1S-
[1alpha(Z),7(2S*, 3R*), 7alpha]]-......................
Butyl acetate........................................... 5000 (2270)
iso-Butyl acetate................................... ..............
sec-Butyl acetate................................... ..............
tert-Butyl acetate.................................. ..............
n-Butyl alcohol......................................... 5000 (2270)
Butylamine.............................................. 1000 (454)
iso-Butylamine...................................... ..............
sec-Butylamine...................................... ..............
tert-Butylamine..................................... ..............
Butyl benzyl phthalate.................................. 100 (45.4)
n-Butyl phthalate....................................... 10 (4.54)
Butyric acid............................................ 5000 (2270)
iso-Butyric acid.................................... ..............
Cacodylic acid.......................................... 1 (0.454)
Cadmium [cent].......................................... 10 (4.54)
Cadmium acetate......................................... 10 (4.54)
Cadmium bromide......................................... 10 (4.54)
Cadmium chloride........................................ 10 (4.54)
Calcium arsenate........................................ 1 (0.454)
Calcium arsenite........................................ 1 (0.454)
Calcium carbide......................................... 10 (4.54)
Calcium chromate........................................ 10 (4.54)
Calcium cyanamide....................................... 1000 (454)
Calcium cyanide......................................... 10 (4.54)
Calcium cyanide Ca(CN)2................................. 10 (4.54)
Calcium dodecylbenzene sulfonate........................ 1000 (454)
Calcium hypochlorite.................................... 10 (4.54)
Camphene, octachloro-................................... 1 (0.454)
Captan.................................................. 10 (4.54)
Carbamic acid, ethyl ester.............................. 100 (45.4)
Carbamic acid, methylnitroso-, ethyl ester.............. 1 (0.454)
Carbamic chloride, dimethyl-............................ 1 (0.454)
Carbamide, thio-........................................ 10 (4.54)
Carbamimidoselenoic acid................................ 1000 (454)
Carbamothioic acid, bis (1-methylethyl)-, S-(2,3- 100 (45.4)
dichloro-2-propenyl) ester.............................
Carbaryl................................................ 100 (45.4)
Carbofuran.............................................. 10 (4.54)
Carbon bisulfide........................................ 100 (45.4)
Carbon disulfide........................................ 100 (45.4)
Carbonic acid, dithallium (I+).......................... 100 (45.4)
Carbonic dichloride..................................... 10 (4.54)
Carbonic difluoride..................................... 1000 (454)
Carbonochloridic acid, methyl ester..................... 1000 (454)
Carbon oxyfluoride...................................... 1000 (454)
Carbon tetrachloride.................................... 10 (4.54)
Carbonyl sulfide........................................ 100 (45.4)
Catechol................................................ 100 (45.4)
Chloral................................................. 5000(2270)
Chloramben.............................................. 100 (45.4)
Chlorambucil............................................ 10 (4.54)
Chlordane............................................... 1 (0.454)
Chlordane, alpha & gamma isomers........................ 1 (0.454)
Chlordane, technical.................................... 1 (0.454)
Chlorine................................................ 10 (4.54)
Chlornaphazine.......................................... 100 (45.4)
Chloroacetaldehyde...................................... 1000 (454)
Chloroacetic acid....................................... 100 (45.4)
2-Chloroacetophenone.................................... 100 (45.4)
p-Chloroaniline......................................... 1000 (454)
Chlorobenzene........................................... 100 (45.4)
[[Page 300]]
Chlorobenzilate......................................... 10 (4.54)
4-Chloro-m-cresol....................................... 5000 (2270)
p-Chloro-m-cresol....................................... 5000 (2270)
Chlorodibromomethane.................................... 100 (45.4)
Chloroethane............................................ 100 (45.4)
2-Chloroethyl vinyl ether............................... 1000 (454)
Chloroform.............................................. 10 (4.54)
Chloromethane........................................... 100 (45.4)
Chloromethyl methyl ether............................... 10 (4.54)
beta-Chloronaphthalene.................................. 5000 (2270)
2-Chloronaphthalene..................................... 5000 (2270)
2-Chlorophenol.......................................... 100 (45.4)
o-Chlorophenol.......................................... 100 (45.4)
4-Chlorophenyl phenyl ether............................. 5000 (2270)
1-(o-Chlorophenyl)thiourea.............................. 100 (45.4)
Chloroprene............................................. 100 (45.4)
3-Chloropropionitrile................................... 1000 (454)
Chlorosulfonic acid..................................... 1000 (454)
4-Chloro-o-toluidine, hydrochloride..................... 100 (45.4)
Chlorpyrifos............................................ 1 (0.454)
Chromic acetate......................................... 1000 (454)
Chromic acid............................................ 10 (4.54)
Chromic acid H2CrO4, calcium salt....................... 10 (4.54)
Chromic sulfate......................................... 1000 (454)
Chromium [cent]......................................... 5000 (2270)
Chromous chloride....................................... 1000 (454)
Chrysene................................................ 100 (45.4)
Cobaltous bromide....................................... 1000 (454)
Cobaltous formate....................................... 1000 (454)
Cobaltous sulfamate..................................... 1000 (454)
Coke Oven Emissions..................................... 1 (0.454)
Copper [cent]........................................... 5000 (2270)
Copper chloride @....................................... 10 (4.54)
Copper cyanide.......................................... 10 (4.54)
Copper cyanide CuCN..................................... 10 (4.54)
Coumaphos............................................... 10 (4.54)
Creosote................................................ 1 (0.454)
Cresols (isomers and mixture)........................... 100 (45.4)
m-Cresol................................................ 100 (45.4)
o-Cresolo............................................... 100 (45.4)
p-Cresol................................................ 100 (45.4)
Cresylic acid (isomers and mixture)..................... 100 (45.4)
m-Cresylic acid......................................... 100 (45.4)
o-Cresylic acid......................................... 100 (45.4)
p-Cresylic acid......................................... 100 (45.4)
Crotonaldehyde.......................................... 100 (45.4)
Cumene.................................................. 5000 (2270)
Cupric acetate.......................................... 100 (45.4)
Cupric acetoarsenite.................................... 1 (0.454)
Cupric chloride......................................... 10 (4.54)
Cupric nitrate.......................................... 100 (45.4)
Cupric oxalate.......................................... 100 (45.4)
Cupric sulfate.......................................... 10 (4.54)
Cupric sulfate ammoniated............................... 100 (45.4)
Cupric tartrate......................................... 100 (45.4)
Cyanides (soluble salts and complexes) not otherwise 10 (4.54)
specified..............................................
Cyanogen................................................ 100 (45.4)
Cyanogen bromide........................................ 1000 (454)
Cyanogen bromide (CN)Br................................. 1000 (454)
Cyanogen chloride....................................... 10 (4.54)
Cyanogen chloride (CN)Cl................................ 10 (4.54)
2,5-Cyclohexadiene-1,4-dione............................ 10 (4.54)
Cyclohexane............................................. 1000 (454)
Cyclohexane, 1,2,3,4,5,6- hexachloro-, (1alpha, 1 (0.454)
2alpha,3beta ,4alpha, 5alpha,6beta)-...................
Cyclohexanone........................................... 5000 (2270)
2-Cyclohexyl-4,6-dinitrophenol.......................... 100 (45.4)
1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-............ 10 (4.54)
Cyclophosphamide........................................ 10 (4.54)
2,4-D Acid.............................................. 100 (45.4)
2,4-D Ester............................................. 100 (45.4)
[[Page 301]]
Daunomycin.............................................. 10 (4.54)
DDD..................................................... 1 (0.454)
4,4'-DDD................................................ 1 (0.454)
DDE..................................................... 1 (0.454)
4,4'-DDE................................................ 1 (0.454)
DDT..................................................... 1 (0.454)
4,4'-DDT................................................ 1 (0.454)
Diallate................................................ 100 (45.4)
Diamine................................................. 1 (0.454)
Diazinon................................................ 1 (0.454)
Diazomethane............................................ 100 (45.4)
Dibenz[a,h]anthracene................................... 1 (0.454)
1,2:5,6-Dibenzanthracene................................ 1 (0.454)
Dibenzo[a,h]anthracene.................................. 1 (0.454)
Dibenzofuran............................................ 100 (45.4)
Dibenz[a,i]pyrene....................................... 10 (4.54)
1,2-Dibromo-3-chloropropane............................. 1 (0.454)
Dibutyl phthalate....................................... 10 (4.54)
Di-n-butyl phthalate.................................... 10 (4.54)
Dicamba................................................. 1000 (454)
Dichlobenil............................................. 100 (45.4)
Dichlone................................................ 1 (0.454)
Dichlorobenzene......................................... 100 (45.4)
1,2-Dichlorobenzene..................................... 100 (45.4)
1,3-Dichlorobenzene..................................... 100 (45.4)
1,4-Dichlorobenzene..................................... 100 (45.4)
m-Dichlorobenzene....................................... 100 (45.4)
o-Dichlorobenzene....................................... 100 (45.4)
p-Dichlorobenzene....................................... 100 (45.4)
3,3'-Dichlorobenzidine.................................. 1 (0.454)
Dichlorobromomethane.................................... 5000 (2270)
1,4-Dichloro-2-butene................................... 1 (0.454)
Dichlorodifluoromethane................................. 5000 (2270)
1,1-Dichloroethane...................................... 1000 (454)
1,2-Dichloroethane...................................... 100 (45.4)
1,1-Dichloroethylene.................................... 100 (45.4)
1,2-Dichloroethylene.................................... 1000 (454)
Dichloroethyl ether..................................... 10 (4.54)
Dichloroisopropyl--ether................................ 1000 (454)
Dichloromethane @....................................... 1000 (454)
Dichloromethoxy ethane.................................. 1000 (454)
Dicholormethyl ether.................................... 10 (4.54)
2,4-Dichlorophenol...................................... 100 (45.4)
2,6-Dichlorophenol...................................... 100 (45.4)
Dichlorophenylarsine.................................... 1 (0.454)
Dichloropropane......................................... 1000 (454)
1,1-Dichloropropane................................. ..............
1,3-Dichloropropane................................. ..............
1,2-Dichloropropane..................................... 1000 (454)
Dichloropropane - Dichloropropene (mixture)............. 100 (45.4)
Dichloropropene......................................... 100 (45.4)
2,3-Dichloropropene................................. ..............
1,3-Dichloropropene..................................... 100 (45.4)
2,2-Dichloropropionic acid.............................. 5000 (2270)
Dichlorvos.............................................. 10 (4.54)
Dicofol................................................. 10 (4.54)
Dieldrin................................................ 1 (0.454)
1,2:3,4-Diepoxybutane................................... 10 (4.54)
Diethanolamine.......................................... 100 (45.4)
Diethylamine............................................ 1000 (454)
N,N-diethylaniline...................................... 1000 (454)
Diethylarsine........................................... 1 (0.454)
1,4-Diethylenedioxide................................... 100 (45.4)
Diethylhexyl phthalate.................................. 100 (45.4)
N,N'-Diethylhydrazine................................... 10 (4.54)
O,O-Diethyl S-methyl dithiophosphate.................... 5000 (2270)
Diethyl-p-nitrophenyl phosphate......................... 100 (45.4)
Diethyl phthalate....................................... 1000(454)
O,O-Diethyl O-pyrazinyl phosphorothioate................ 100 (45.4)
Diethylstilbestrol...................................... 1 (0.454)
[[Page 302]]
Diethyl sulfate......................................... 10 (4.54)
Dihydrosafrole.......................................... 10 (4.54)
Diisopropyl fluorophosphate............................. 100 (45.4)
1,4,5,8-Dimethanonaphthalene............................ 1 (0.454)
1,2,3,4,10,10-hexachloro-1,4,4a,5,8,8a-hexahydro,
(1alpha,4alpha,4abeta,5abeta,8beta,8abeta)-............
1,4,5,8-Dimethanonaphthalene,1,2,3,4,10,10-10-hexachloro- 1 (0.454)
1,4,4a,5,8,8a-hexahydro-
,(1alpha,4alpha,4abeta,5alpha,8alpha,8abeta)-..........
2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 3,4,5,6,9,9- 1 (0.454)
hexachloro-1a,2,2a,3,6,6a,7,7a-........................
octahydro-,(1aalpha,2beta,2abeta,3alpha,6alpha,6abeta,.
7beta,7aalpha)-........................................
2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 3,4,5,6,9,9- 1 (0.454)
hexachloro-1a,2,2a,3,6,6a,7,7a-........................
octahydro-,(1aalpha,2beta,2aalpha,3beta,6beta,6aalpha,.
7beta,7aalpha)-........................................
Dimethoate.............................................. 10 (4.54)
3,3'-Dimethoxybenzidine................................. 10 (4.54)
Dimethylamine........................................... 1000 (454)
p-Dimethylaminoazobenzene............................... 10 (4.54)
N,N-dimethylaniline..................................... 100 (45.4)
7,12-Dimethylbenz[a]anthracene.......................... 1 (0.454)
3,3'-Dimethylbenzidine.................................. 10 (4.54)
alpha,alpha-Dimethylbenzylhydroperoxide................. 10 (4.54)
Dimethylcarbamoyl chloride.............................. 1 (0.454)
Dimethylformamide....................................... 100 (45.4)
1,1-Dimethylhydrazine................................... 10 (4.54)
1,2-Dimethylhydrazine................................... 1 (0.454)
Dimethylhydrazine, unsymmetrical @...................... 10 (4.54)
alpha,alpha-Dimethylphenethylamine...................... 5000 (2270)
12,4-Dimethylphenol..................................... 100 (45.4)
Dimethyl phthalate...................................... 5000 (2270)
Dimethyl sulfate........................................ 100 (45.4)
Dinitrobenzene (mixed).................................. 100 (45.4)
m-Dinitrobenzene.................................... ..............
o-Dinitrobenzene.................................... ..............
p-Dinitrobenzene....................................
4,6-Dinitro-o-cresol and salts.......................... 10 (4.54)
Dinitrogen tetroxide @.................................. 10 (4.54)
Dinitrophenol........................................... 10 (4.54)
2,5-Dinitrophenol................................... ..............
2,4-Dinitrophenol....................................... 10 (4.54)
Dinitrotoluene.......................................... 10 (4.54)
3,4-Dinitrotoluene.................................. ..............
2,4-Dinitrotoluene...................................... 10 (4.54)
2,6-Dinitrotoluene...................................... 100 (45.4)
Dinoseb................................................. 1000 (454)
Di-n-octyl phthalate.................................... 5000 (2270)
1,4-Dioxane............................................. 100 (45.4)
1,2-Diphenylhydrazine................................... 10 (4.54)
Diphosphoramide, octamethyl-............................ 100 (45.4)
Diphosphoric acid, tetraethyl ester..................... 10 (4.54)
Dipropylamine........................................... 5000 (2270)
Di-n-propylnitrosamine.................................. 10 (4.54)
Diquat.................................................. 1000 (454)
Disulfoton.............................................. 1 (0.454)
Dithiobiuret............................................ 100 (45.4)
Diuron.................................................. 100 (45.4)
Dodecyl benzenesulfonic acid............................ 1000 (454)
2,4-D, salts and esters................................. 100 (45.4)
Endosulfan.............................................. 1 (0.454)
alpha-Endosulfan........................................ 1 (0.454)
beta-Endosulfan......................................... 1 (0.454)
Endosulfan sulfate...................................... 1 (0.454)
Endothall............................................... 1000 (454)
Endrin.................................................. 1 (0.454)
Endrin, & metabolites................................... 1 (0.454)
Endrin aldehyde......................................... 1 (0.454)
Epichlorohydrin......................................... 100 (45.4)
Epinephrine............................................. 1000 (454)
1,2-Epoxybutane......................................... 100 (45.4)
Ethanal................................................. 1000 (454)
Ethanamine, N-ethyl-N-nitroso-.......................... 1 (0.454)
[[Page 303]]
Ethane, 1,2-dibromo-.................................... 1 (0.454)
Ethane, 1,1-dichloro-................................... 1000 (454)
Ethane, 1,2-dichloro-................................... 100 (45.4)
Ethane, hexachloro-..................................... 100 (45.4)
Ethane, 1,1'-[methyl enebis (oxy)] bis(2-chloro-........ 1000 (454)
Ethane, 1,1'-oxybis-.................................... 100 (45.4)
Ethane, 1,1'-oxybis(2-chloro-........................... 10 (4.54)
Ethane, pentachloro-.................................... 10 (4.54)
Ethane, 1,1,1,2-tetrachloro-............................ 100 (45.4)
Ethane, 1,1,2,2-tetrachloro-............................ 100 (45.4)
Ethane, 1,1,2-trichloro-................................ 100 (45.4)
Ethane, 1,1,1-trichloro-................................ 1000 (454)
1,2-Ethanediamine, N,N- dime thyl-N'-2-pyri dinyl-N'-(2- 5000 (2270)
thie nyl -methyl)-.....................................
Ethanedinitrile......................................... 100 (45.4)
Ethanenitrile........................................... 5000 (2270)
Ethanethioamide......................................... 10 (4.54)
Ethanimidothioic acid, N-[[(methy lamino)carbonyl] oxy]- 100 (45.4)
, methyl ester.........................................
Ethanol, 2-ethoxy-...................................... 1000 (454)
Ethanol, 2,2'-(nitrosoimino)bis-........................ 1 (0.454)
Ethanone, 1-phenyl-..................................... 5000 (2270)
Ethanoyl chloride....................................... 5000 (2270)
Ethene, chloro-......................................... 1 (0.454)
Ethene, 2-chloroethoxy-................................. 1000 (454)
Ethene, 1,1-dichloro-................................... 100 (45.4)
Ethene, 1,2-dichloro- (E)............................... 1000 (454)
Ethene, tetrachloro-.................................... 100 (45.4)
Ethene, trichloro-...................................... 100 (45.4)
Ethion.................................................. 10 (4.54)
Ethyl acetate........................................... 5000 (2270)
Ethyl acrylate.......................................... 1000 (454)
Ethylbenzene............................................ 1000 (454)
Ethyl carbamate (Urethan)............................... 100 (45.4)
Ethyl chloride @........................................ 100 (45.4)
Ethyl cyanide........................................... 10 (4.54)
Ethylene dibromide...................................... 1 (0.454)
Ethylene dichloride..................................... 100 (45.4)
Ethylene glycol......................................... 5000 (2270)
Ethylene glycol monoethyl ether......................... 1000 (454)
Ethylene oxide.......................................... 10 (4.54)
Ethylenebisdithiocarbamic acid.......................... 5000 (2270)
Ethylene bisdithio carbamic acid, salts and esters...... 5000 (2270)
Ethylenediamine......................................... 5000 (2270)
Ethylenediamine tetraacetic acid (EDTA)................. 5000 (2270)
Ethylenethiourea........................................ 10 (4.54)
Ethylenimine............................................ 1 (0.454)
Ethyl ether............................................. 100 (45.4)
Ethylidene dichloride................................... 1000 (454)
Ethyl methacrylate...................................... 1000 (454)
Ethyl methanesulfonate.................................. 1 (0.454)
Ethyl methyl ketone @................................... 5000 (2270)
Famphurdimethylester.................................... 1000 (454)
Ferric ammonium citrate................................. 1000 (454)
Ferric ammonium oxalate................................. 1000 (454)
Ferric chloride......................................... 1000 (454)
Ferric fluoride......................................... 100 (45.4)
Ferric nitrate.......................................... 1000 (454)
Ferric sulfate.......................................... 1000 (454)
Ferrous ammonium sulfate................................ 1000 (454)
Ferrous chloride........................................ 100 (45.4)
Ferrous sulfate......................................... 1000 (454)
Fluoranthene............................................ 100 (45.4)
Fluorene................................................ 5000 (2270)
Fluorine................................................ 10 (4.54)
Fluoroacetamide......................................... 100 (45.4)
Fluoroacetic acid, sodium salt.......................... 10 (4.54)
Formaldehyde............................................ 100 (45.4)
Formic acid............................................. 5000 (2270)
Fulminic acid, mercury(2+)salt.......................... 10 (4.54)
Fumaric acid............................................ 5000 (2270)
Furan................................................... 100 (45.4)
[[Page 304]]
Furan, tetrahydro-...................................... 1000 (454)
2-Furan carbox aldehyde................................. 5000 (2270)
2,5-Furandione.......................................... 5000 (2270)
Furfural................................................ 5000 (2270)
Furfuran................................................ 100 (45.4)
Glucopyranose, 2-deoxy-2-(3-methyl-3-nitrosoureido)-.... 1 (0.454)
D-Glucose, 2-deoxy-2-[[methylnitrosoamino)- 1 (0.454)
carbonyl]amino]-.......................................
Glycidylaldehyde........................................ 10 (4.54)
Guanidine, N-methyl-N'-nitro-N-nitroso-................. 10 (4.54)
Guthion................................................. 1 (0.454)
Heptachlor.............................................. 1 (0.454)
Heptachlor epoxide...................................... 1 (0.454)
Hexachlorobenzene....................................... 10 (4.54)
Hexachlorobutadiene..................................... 1 (0.454)
Hexachlorocyclohexane (gamma isomer).................... 1 (0.454)
Hexachlorocyclopentadiene............................... 10 (4.54)
Hexachloroethane........................................ 100 (45.4)
1,2,3,4,10-10-Hexachloro-1,4,4a,5,8,8a-hexahydro-1,4:5,8- 1 (0.454)
endo,exo-dimethanonaphthalene..........................
Hexachlorophene......................................... 100 (45.4)
Hexachloropropene....................................... 1000 (454)
Hexaethyl tetraphosphate................................ 100 (45.4)
Hexamethylene-1,6-diisocyanate.......................... 100 (45.4)
Hexamethylphosphoramide................................. 1 (0.454)
Hexane.................................................. 5000 (2270)
Hydrazine............................................... 1 (0.454)
Hydrazine, 1,2-diethyl-................................. 10 (4.54)
Hydrazine, 1,1-dimethyl-................................ 10 (4.54)
Hydrazine, 1,2-dimethyl-................................ 1 (0.454)
Hydrazine, 1,2-diphenyl-................................ 10 (4.54)
Hydrazine, methyl-...................................... 10 (4.54)
Hydrazinecarbothioamide................................. 100 (45.4)
Hydrochloric acid....................................... 5000 (2270)
Hydrocyanic acid........................................ 10 (4.54)
Hydrofluoric acid....................................... 100 (45.4)
Hydrogen chloride....................................... 5000 (2270)
Hydrogen cyanide........................................ 10 (4.54)
Hydrogen fluoride....................................... 100 (45.4)
Hydrogen phosphide...................................... 100 (45.4)
Hydrogen sulfide........................................ 100 (45.4)
Hydrogen sulfide H2S.................................... 100 (45.4)
Hydroperoxide, 1-methyl-1-phenylethyl-.................. 10 (4.54)
Hydroquinone............................................ 100 (45.4)
2-Imidazolidinethione................................... 10 (4.54)
Indeno(1,2,3-cd)pyrene.................................. 100 (45.4)
1,3-Isobenzofurandione.................................. 5000 (2270)
Isobutyl alcohol........................................ 5000 (2270)
Isodrin................................................. 1 (0.454)
Isophorone.............................................. 5000 (2270)
Isoprene................................................ 100 (45.4)
Isopropanolamine dodecylbenzene sulfonate............... 1000 (454)
Isosafrole.............................................. 100 (45.4)
3(2H)-Isoxazolone, 5-(aminomethyl)-..................... 1000 (454)
Keponedecachloroc-tahydro-.............................. 1 (0.454)
Lasiocarpine............................................ 10 (4.54)
Lead [cent]............................................. 10 (4.54)
Lead acetate............................................ 10 (4.54)
Lead arsenate........................................... 1 (0.454)
Lead, bis(acetato-O)tetrahydroxytri..................... 10 (4.54)
Lead chloride........................................... 10 (4.54)
Lead fluoborate......................................... 10 (4.54)
Lead fluoride........................................... 10 (4.54)
Lead iodide............................................. 10 (4.54)
Lead nitrate............................................ 10 (4.54)
Lead phosphate.......................................... 10 (4.54)
Lead stearate........................................... 10 (4.54)
Lead subacetate......................................... 10 (4.54)
Lead sulfate............................................ 10 (4.54)
Lead sulfide............................................ 10 (4.54)
Lead thiocyanate........................................ 10 (4.54)
Lindane................................................. 1 (0.454)
[[Page 305]]
Lithium chromate........................................ 10 (4.54)
Malathion............................................... 100 (45.4)
Maleic acid............................................. 5000 (2270)
Maleic anhydride........................................ 5000 (2270)
Maleic hydrazide........................................ 5000 (2270)
Malononitrile........................................... 1000 (454)
MDI..................................................... 5000 (2270)
Melphalan............................................... 1 (0.454)
Mercaptodimethur........................................ 10 (4.54)
Mercuric cyanide........................................ 1 (0.454)
Mercuric nitrate........................................ 10 (4.54)
Mercuric sulfate........................................ 10 (4.54)
Mercuric thiocyanate.................................... 10 (4.54)
Mercurous nitrate....................................... 10 (4.54)
Mercury................................................. 1 (0.454)
Mercury, (acetato-O)phenyl-............................. 100 (45.4)
Mercury fulminate....................................... 10 (4.54)
Methacrylonitrile....................................... 1000 (454)
Methanamine, N-methyl-.................................. 1000 (454)
Methanamine, N-methyl-N-nitroso......................... 10 (4.54)
Methane, bromo-......................................... 1000 (454)
Methane, chloro-........................................ 100 (45.4)
Methane, chloromethoxy-................................. 10 (4.54)
Methane, dibromo-....................................... 1000 (454)
Methane, dichloro-...................................... 1000 (454)
Methane, dichlorodifluoro-.............................. 5000 (2270)
Methane, iodo-.......................................... 100 (45.4)
Methane, isocyanato-.................................... 10 (4.54)
Methane, oxybis(chloro-................................. 10 (4.54)
Methane, tetrachloro-................................... 10 (4.54)
Methane, tetranitro-.................................... 10 (4.54)
Methane, tribromo-...................................... 100 (45.4)
Methane, trichloro-..................................... 10 (4.54)
Methane, trichlorofluoro-............................... 5000 (2270)
Methanesulfenyl chloride, trichloro-.................... 100 (45.4)
Methanesulfonic acid, ethyl ester....................... 1 (0.454)
Methanethiol............................................ 100 (45.4)
6,9-Methano-2,4,3-benzodioxathiepin, 6,7,8,9,10,10- 1 (0.454)
hexachloro-1,5,5a,6,9,9a-hexahydro-, 3-oxide...........
Methanoic acid.......................................... 5000 (2270)
4,7-Methano-1H-indene, 1,4,5,6,7,8,8-heptachloro- 1 (0.454)
a,4,7,7a-tetrahydro-...................................
4,7-Methano-1H-indene, 1,4,5,6,7,8,8-octachloro- 1 (0.454)
2,3,3a,4,7,7a-hexahydro-...............................
Methanol................................................ 5000 (2270)
Methapyrilene........................................... 5000 (2270)
1,3,4-Metheno-2H-cyclobutal[cd]-pentalen-2-one, 1 (0.454)
1,1a,3,3a,4,5,5,5a,5b,6-decachloroctahydro-............
Methomyl................................................ 100 (45.4)
Methoxychlor............................................ 1 (0.454)
Methyl alcohol.......................................... 5000 (2270)
Methylamine @........................................... 100 (45.4)
Methyl bromide.......................................... 1000 (454)
1-Methylbutadiene....................................... 100 (45.4)
Methyl chloride......................................... 100 (45.4)
Methyl chlorocarbonate.................................. 1000 (454)
Methyl chloroform....................................... 1000 (454)
Methyl chloroformate.................................... 1000 (454)
Methylchloromethyl ether @.............................. 1 (0.454)
3-Methylcholanthrene.................................... 10 (4.54)
4,4'-Methylenebis(2-chloroaniline)...................... 10 (4.54)
Methylene bromide....................................... 1000 (454)
Methylene chloride...................................... 1000 (454)
4,4'-Methylenedianiline................................. 10 (4.54)
Methylene diphenyl diisocyanate......................... 5000 (2270)
Methylene oxide......................................... 100 (45.4)
Methyl ethyl ketone (MEK)............................... 5000 (2270)
Methyl ethyl ketone peroxide............................ 10 (4.54)
Methyl hydrazine........................................ 10 (4.54)
Methyl iodide........................................... 100 (45.4)
Methyl isobutyl ketone.................................. 5000 (2270)
Methyl isocyanate....................................... 10 (4.54)
2-Methyllactonitrile.................................... 10 (4.54)
Methyl mercaptan........................................ 100 (45.4)
[[Page 306]]
Methyl methacrylate..................................... 1000 (454)
Methyl parathion........................................ 100 (45.4)
4-Methyl-2-pentanone.................................... 5000 (2270)
Methyl tert-butyl ether................................. 1000 (454)
Methylthiouracil........................................ 10 (4.54)
Mevinphos............................................... 10 (4.54)
Mexacarbate............................................. 1000 (454)
Mitomycin C............................................. 10 (4.54)
MNNG.................................................... 10 (4.54)
Monoethylamine.......................................... 100 (45.4)
Monomethylamine......................................... 100 (45.4)
Muscimol................................................ 1000 (454)
Naled................................................... 10 (4.54)
5,12-Naphthacenedione, 8-acetyl-10-[3-amino-2,3,6- 10 (4.54)
trideoxy-alpha-L-lyxo-hexopyranosyl) oxy]-7,8,9,10-
tetrahydro-6,8,11-trihydroxy-1-methoxy-, (8S-cis)-.....
Naphthalenamine, N,N-bis(2-chloroethyl)-................ 100 (45.4)
Naphthalene............................................. 100 (45.4)
Naphthalene, 2-chloro-.................................. 5000 (2270)
1,4-Naphthalenedione.................................... 5000 (2270)
2,7-Naphthalenedisulfonic acid, 3,3'-[(3,3'- dimethyl- 10 (4.54)
(l,1'-biphenyl)-4,4'-diyl)-bis(azo)]bis(5-amino-4-
hydroxy)-tetrasodium salt..............................
Naphthenic acid......................................... 100 (45.4)
1,4-Naphthoquinone...................................... 5000 (2270)
alpha-Naphthylamine..................................... 100 (45.4)
beta-Naphthylamine...................................... 1 (0.454)
1-Naphthylamine......................................... 100 (45.4)
2-Naphthylamine......................................... 1 (0.454)
alpha-Naphthylthiourea.................................. 100 (45.4)
Nickel [cent]........................................... 100 (45.4)
Nickel ammonium sulfate................................. 100 (45.4)
Nickel carbonyl......................................... 10 (4.54)
Nickel carbonyl Ni(CO)4,(T-4)-.......................... 10 (4.54)
Nickel chloride......................................... 100 (45.4)
Nickel cyanide.......................................... 10 (4.54)
Nickel cyanide Ni(CN)2.................................. 10 (4.54)
Nickel hydroxide........................................ 10 (4.54)
Nickel nitrate.......................................... 100 (45.4)
Nickel sulfate.......................................... 100 (45.4)
Nicotine and salts...................................... 100 (45.4)
Nitric acid............................................. 1000 (454)
Nitric acid, thallium(1+) salt.......................... 100 (45.4)
Nitric oxide............................................ 10 (4.54)
p-Nitroaniline.......................................... 5000 (2270)
Nitrobenzene............................................ 1000 (454)
4-nitrobiphenyl......................................... 10 (4.54)
Nitrogen dioxide........................................ 10 (4.54)
Nitrogen oxide NO....................................... 10 (4.54)
Nitrogen oxide NO2...................................... 10 (4.54)
Nitroglycerine.......................................... 10 (4.54)
Nitrophenol (mixed)..................................... 100 (45.4)
m-.................................................. ..............
o-.................................................. ..............
p-.................................................. ..............
o-Nitrophenol........................................... 100 (45.4)
p-Nitrophenol........................................... 100 (45.4)
2-Nitrophenol........................................... 100 (45.4)
4-Nitrophenol........................................... 100 (45.4)
2-Nitropropane.......................................... 10 (4.54)
N-Nitrosodi-n-butylamine................................ 10 (4.54)
N-Nitrosodiethanolamine................................. 1 (0.454)
N-Nitrosodiethylamine................................... 1 (0.454)
N-Nitrosodimethylamine.................................. 10 (4.54)
N-Nitrosodiphenylamine.................................. 100 (45.4)
N-Nitroso-N-ethylurea................................... 1 (0.454)
N-Nitroso-N-methylurea.................................. 1 (0.454)
N-Nitroso-N-methylurethane.............................. 1 (0.454)
N-Nitrosomethylvinylamine............................... 10 (4.54)
n-Nitrosomorpholine..................................... 1 (0.454)
N-Nitrosopiperidine..................................... 10 (4.54)
N-Nitrosopyrrolidine.................................... 1 (0.454)
[[Page 307]]
Nitrotoluene............................................ 1000 (454)
m-Nitrotoluene...................................... ..............
o-Nitrotoluene...................................... ..............
p-Nitrotoluene...................................... ..............
5-Nitro-o-toluidine..................................... 100 (45.4)
Octamethylpyrophosphoramide............................. 100 (45.4)
Osmium oxide OsO4 (T-4)-................................ 1000 (454)
Osmium tetroxide........................................ 1000 (454)
7-Oxabicyclo[2.2.1]heptane-2,3-dicarboxylic acid........ 1000 (454)
1,2-Oxathiolane, 2,2-dioxide............................ 10 (4.54)
2H-1,3,2-Oxazaphosphorin-2-amine, N,N-bis(2- 10 (4.54)
chloroethyl)tetrahydro-, 2-oxide.......................
Oxirane................................................. 10 (4.54)
Oxiranecarboxyaldehyde.................................. 10 (4.54)
Oxirane, (chloromethyl)-................................ 100 (45.4)
Paraformaldehyde........................................ 1000 (454)
Paraldehyde............................................. 1000 (454)
Parathion............................................... 10 (4.54)
Pentachlorobenzene...................................... 10 (4.54)
Pentachloroethane....................................... 10 (4.54)
Pentachloronitrobenzene (PCNB).......................... 100 (45.4)
Pentachlorophenol....................................... 10 (4.54)
1,3-Pentadiene.......................................... 100 (45.4)
Perchloroethylene....................................... 100 (45.4)
Perchloromethyl mercaptan @............................. 100 (45.4)
Phenacetin.............................................. 100 (45.4)
Phenanthrene............................................ 5000 (2270)
Phenol.................................................. 1000 (454)
Phenol, 2-chloro-....................................... 100 (45.4)
Phenol, 4-chloro-3-methyl-.............................. 5000 (2270)
Phenol, 2-cyclohexyl-4,6-dinitro-....................... 100 (45.4)
Phenol, 2,4-dichloro-................................... 100 (45.4)
Phenol, 2,6-dichloro-................................... 100 (45.4)
Phenol, 4,4'-(1,2-diethyl-1,2-ethenediyl)bis-, (E)...... 1 (0.454)
Phenol, 2,4-dimethyl-................................... 100 (45.4)
Phenol, 2,4-dinitro-.................................... 10 (4.54)
Phenol, methyl-......................................... 100 (45.4)
Phenol, 2-methyl-4,6-dinitro-........................... 10 (4.54)
Phenol, 2,2'-methylenebis[3,4,6-trichloro-.............. 100 (45.4)
Phenol, 2-(1-methylpropyl)-4,6-dinitro.................. 1000 (454)
Phenol, 4-nitro-........................................ 100 (45.4)
Phenol, pentachloro-.................................... 10 (4.54)
Phenol, 2,3,4,6-tetrachloro-............................ 10 (4.54)
Phenol, 2,4,5-trichloro-................................ 10 (4.54)
Phenol, 2,4,6-trichloro-................................ 10 (4.54)
Phenol, 2,4,6-trinitro-, ammonium salt.................. 10 (4.54)
L-Phenylalanine, 4-[bis(2-chloroethyl)aminol]........... 1 (0.454)
p-Phenylenediamine...................................... 5000 (2270)
1,10-(1,2-Phenylene)pyrene.............................. 100 (45.4)
Phenyl mercaptan @...................................... 100 (45.4)
Phenylmercuric acetate.................................. 100 (45.4)
Phenylthiourea.......................................... 100 (45.4)
Phorate................................................. 10 (4.54)
Phosgene................................................ 10 (4.54)
Phosphine............................................... 100 (45.4)
Phosphoric acid......................................... 5000 (2270)
Phosphoric acid, diethyl 4-nitrophenyl ester............ 100 (45.4)
Phosphoric acid, lead(2+) salt (2:3).................... 10 (4.54)
Phosphorodithioic acid, O,O-diethyl S-[2- 1 (0.454)
(ethylthio)ethyl]ester.................................
Phosphorodithioic acid, O,O-diethyl S-(ethylthio), 10 (4.54)
methyl ester...........................................
Phosphorodithioic acid, O,O-diethyl S-methyl ester...... 5000 (2270)
Phosphorodithioic acid, O,O-dimethyl S-[2 (methylamino)- 10 (4.54)
2-oxoethyl] ester......................................
Phosphorofluoridic acid, bis(1-methylethyl) ester....... 100 (45.4)
Phosphorothioic acid, O,O-diethyl O-(4-nitrophenyl) 10 (4.54)
ester..................................................
Phosphorothioic acid, O,O-diethyl O-pyrazinyl ester..... 100 (45.4)
Phosphorothioic acid, O,O-dimethyl O-(4-nitrophenyl) 100 (45.4)
ester..................................................
Phosphorothioic acid, O,[4-[(dimethylamino)sulfonyl] 1000 (454)
phenyl] O,O-dimethyl ester.............................
Phosphorus.............................................. 1 (0.454)
Phosphorus oxychloride.................................. 1000 (454)
Phosphorus pentasulfide................................. 100 (45.4)
Phosphorus sulfide...................................... 100 (45.4)
[[Page 308]]
Phosphorus trichloride.................................. 1000 (454)
Phthalic anhydride...................................... 5000 (2270)
2-Picoline.............................................. 5000 (2270)
Piperidine, 1-nitroso-.................................. 10 (4.54)
Plumbane, tetraethyl-................................... 10 (4.54)
POLYCHLORINATED BIPHENYLS (PCBs)........................ 1 (0.454)
Potassium arsenate...................................... 1 (0.454)
Potassium arsenite...................................... 1 (0.454)
Potassium bichromate.................................... 10 (4.54)
Potassium chromate...................................... 10 (4.54)
Potassium cyanide....................................... 10 (4.54)
Potassium cyanide K(CN)................................. 10 (4.54)
Potassium hydroxide..................................... 1000 (454)
Potassium permanganate.................................. 100 (45.4)
Potassium silver cyanide................................ 1 (0.454)
Pronamide............................................... 5000 (2270)
Propanal, 2-methyl-2-(methylthio)-,O- 1 (0.454)
[(methylamino)carbonyl]oxime...........................
1-Propanamine........................................... 5000 (2270)
1-Propanamine, N-nitroso-N-propyl-...................... 10 (4.54)
1-Propanamine, N-propyl-................................ 5000 (2270)
Propane, 1,2-dibromo-3-chloro-.......................... 1 (0.454)
Propane, 1,2-dichloro-.................................. 1000 (454)
Propane, 2-nitro-....................................... 10 (4.54)
Propane, 2,2'-oxybis [2-chloro-......................... 1000 (454)
1,3-Propane sultone..................................... 10 (4.54)
Propanedinitrile........................................ 1000 (454)
Propanenitrile.......................................... 10 (4.54)
Propanenitrile, 3-chloro-............................... 1000 (454)
Propanenitrile, 2-hydroxy-2-methyl-..................... 10 (4.54)
1,2,3-Propanetriol, trinitrate-......................... 10 (4.54)
1-Propanol, 2,3-dibromo-, phosphate (3:1)............... 10 (4.54)
1-Propanol, 2-methyl-................................... 5000 (2270)
2-Propanone............................................. 5000 (2270)
2-Propanone, 1-bromo-................................... 1000 (454)
Propargite.............................................. 10 (4.54)
Propargyl alcohol....................................... 1000 (454)
2-Propenal.............................................. 1 (0.454)
2-Propenamide........................................... 5000 (2270)
1-Propene, 1,3-dichloro-................................ 100 (45.4)
1-Propene, 1,1,2,3,3,3-hexachloro-...................... 1000 (454)
2-Propenenitrile........................................ 100 (45.4)
2-Propenenitrile, 2-methyl-............................. 1000 (454)
2-Propenoic acid........................................ 5000 (2270)
2-Propenoic acid, ethyl ester........................... 1000 (454)
2-Propenoic acid, 2-methyl-, ethyl ester................ 1000 (454)
2-Propenoic acid, 2-methyl-, methyl ester............... 1000 (454)
2-Propen-1-ol........................................... 100 (45.4)
beta-Propioaldehyde..................................... 1000 (454)
Propionic acid.......................................... 5000 (2270)
Propionic acid, 2-(2,4,5-trichlorophenoxy)-............. 100 (45.4)
Propionic anhydride..................................... 5000 (2270)
Propoxur (baygon)....................................... 100 (45.4)
n-Propylamine........................................... 5000 (2270)
Propylene dichloride.................................... 1000 (454)
Propylene oxide......................................... 100 (45.4)
1,2-Propylenimine....................................... 1 (0.454)
2-Propyn-1-ol........................................... 1000 (454)
Pyrene.................................................. 5000 (2270)
Pyrethrins.............................................. 1 (0.454)
3,6-Pyridazinedione, 1,2-dihydro-....................... 5000 (2270)
4-Pyridinamine.......................................... 1000 (454)
Pyridine................................................ 1000 (454)
Pyridine, 2-methyl-..................................... 5000 (2270)
Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)............. 100 (45.4)
2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2-chloroethyl)amino]- 10 (4.54)
.......................................................
4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2-thioxo-...... 10 (4.54)
Pyrrolidine, 1-nitroso-................................. 1 (0.454)
Quinoline............................................... 5000 (2270)
RADIONUCLIDES........................................... See table 2
Reserpine............................................... 5000 (2270)
[[Page 309]]
Resorcinol.............................................. 5000 (2270)
Saccharin and salts..................................... 100 (45.4)
Safrole................................................. 100 (45.4)
Selenious acid.......................................... 10 (4.54)
Selenious acid, dithallium(1+) salt..................... 1000 (454)
Selenium [cent]......................................... 100 (45.4)
Selenium dioxide........................................ 10 (4.54)
Selenium oxide.......................................... 10 (4.54)
Selenium sulfide........................................ 10 (4.54)
Selenium sulfide SeS2................................... 10 (4.54)
Selenourea.............................................. 1000 (454)
L-Serine, diazoacetate (ester).......................... 1 (0.454)
Silver [cent]........................................... 1000 (454)
Silver cyanide.......................................... 1 (0.454)
Silver cyanide Ag(CN)................................... 1 (0.454)
Silver nitrate.......................................... 1 (0.454)
Silvex(2,4,5-TP)........................................ 100 (45.4)
Sodium.................................................. 10 (4.54)
Sodium arsenate......................................... 1 (0.454)
Sodium arsenite......................................... 1 (0.454)
Sodium azide............................................ 1000 (454)
Sodium bichromate....................................... 10 (4.54)
Sodium bifluoride....................................... 100 (45.4)
Sodium bisulfite........................................ 5000 (2270)
Sodium chromate......................................... 10 (4.54)
Sodium cyanide.......................................... 10 (4.54)
Sodium cyanide Na(CN)................................... 10 (4.54)
Sodium dodecylbenzene sulfonate......................... 1000 (454)
Sodium fluoride......................................... 1000 (454)
Sodium hydrosulfide..................................... 5000 (2270)
Sodium hydroxide........................................ 1000 (454)
Sodium hypochlorite..................................... 100 (45.4)
Sodium methylate........................................ 1000 (454)
Sodium nitrite.......................................... 100 (45.4)
Sodium phosphate, dibasic............................... 5000 (2270)
Sodium phosphate, tribasic.............................. 5000 (2270)
Sodium selenite......................................... 100 (45.4)
Streptozotocin.......................................... 1 (0.454)
Strontium chromate...................................... 10 (4.54)
Strychnidin-10-one...................................... 10 (4.54)
Strychnidin-10-one, 2,3-dimethoxy-...................... 100 (45.4)
Strychnine and salts.................................... 10 (4.54)
Styrene................................................. 1000 (454)
Styrene oxide........................................... 100 (45.4)
Sulfur chloride @....................................... 1000 (454)
Sulfur monochloride..................................... 1000 (454)
Sulfur phosphide........................................ 100 (45.4)
Sulfuric acid........................................... 1000 (454)
Sulfuric acid, dimethyl ester........................... 100 (45.4)
Sulfuric acid, dithallium(I+) salt...................... 100 (45.4)
2,4,5-T................................................. 1000 (454)
2,4,5-T acid............................................ 1000 (454)
2,4,5-T amines.......................................... 5000 (2270)
2,4,5-T esters.......................................... 1000 (454)
2,4,5-T salts........................................... 1000 (454)
TDE..................................................... 1 (0.454)
1,2,4,5-Tetrachlorobenzene.............................. 5000 (2270)
2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD).............. 1 (0.454)
1,1,1,2-Tetrachloroethane............................... 100 (45.4)
1,1,2,2-Tetrachloroethane............................... 100 (45.4)
Tetrachloroethane @..................................... 100 (45.4)
Tetrachloroethene....................................... 100 (45.4)
Tetrachloroethylene..................................... 100 (45.4)
2,3,4,6-Tetrachlorophenol............................... 10 (4.54)
Tetraethyl lead......................................... 10 (4.54)
Tetraethyl pyrophosphate................................ 10 (4.54)
Tetraethyldithiopyrophosphate........................... 100 (45.4)
Tetrahydrofuran......................................... 1000 (454)
Tetranitromethane....................................... 10 (4.54)
Tetraphosphoric acid, hexaethyl ester................... 100 (45.4)
[[Page 310]]
Thallic oxide........................................... 100 (45.4)
Thallium [cent]......................................... 1000 (454)
Thallium(I) acetate..................................... 100 (45.4)
Thallium(I) carbonate................................... 100 (45.4)
Thallium(I) chloride.................................... 100 (45.4)
Thallium chloride TlCl.................................. 100 (45.4)
Thallium(I) nitrate..................................... 100 (45.4)
Thallium oxide T1203.................................... 100 (45.4)
Thallium selenite....................................... 1000 (454)
Thallium(I) sulfate..................................... 100 (45.4)
Thioacetamide........................................... 10 (4.54)
Thiodiphosphoric acid, tetraethyl ester................. 100 (45.4)
Thiofanox............................................... 100 (45.4)
Thioimidodicarbonic diamide [(H2N)C(S)]2NH.............. 100 (45.4)
Thiomethanol............................................ 100 (45.4)
Thioperoxydicarbonic diamide [(H2N)C(S)]2S2, tetramethyl- 10 (4.54)
.......................................................
Thiophenol.............................................. 100 (45.4)
Thiosemicarbazide....................................... 100 (45.4)
Thiourea................................................ 10 (4.54)
Thiourea, (2-chlorophenyl)-............................. 100 (45.4)
Thiourea, 1-naphthalenyl-............................... 100 (45.4)
Thiourea, phenyl-....................................... 100 (45.4)
Thiram.................................................. 10 (4.54)
Titanium tetrachloride.................................. 1000 (454)
Toluene................................................. 1000 (454)
Toluenediamine.......................................... 10 (4.54)
Toluene diisocyanate.................................... 100 (45.4)
o-Toluidine............................................. 100 (45.4)
p-Toluidine............................................. 100 (45.4)
o-Toluidine hydrochloride............................... 100 (45.4)
Toxaphene............................................... 1 (0.454)
2,4,5-TP acid........................................... 100 (45.4)
2,4,5-TP acid esters.................................... 100 (45.4)
1H-1,2,4-Triazol-3-amine................................ 10 (4.54)
Trichlorfon............................................. 100 (45.4)
1,2,4-Trichlorobenzene.................................. 100 (45.4)
1,1,1-Trichloroethane................................... 1000 (454)
1,1,2-Trichloroethane................................... 100 (45.4)
Trichloroethene......................................... 100 (45.4)
Trichloroethylene....................................... 100 (45.4)
Trichloromethanesulfenyl chloride....................... 100 (45.4)
Trichloromonofluoromethane.............................. 5000 (2270)
Trichlorophenol......................................... 10 (4.54)
2,3,4-Trichlorophenol............................... ..............
2,3,5-Trichlorophenol...............................
2,3,6-Trichlorophenol............................... ..............
2,4,5-Trichlorophenol............................... ..............
2,4,6-Trichlorophenol............................... ..............
3,4,5-Trichlorophenol............................... ..............
2,4,5-Trichlorophenol................................... 10 (4.54)
2,4,6-Trichlorophenol................................... 10 (4.54)
Triethanolamine dodecylbenzene sulfonate................ 1000 (454)
Triethylamine........................................... 5000 (2270)
Trifluralin............................................. 10 (4.54)
Trimethylamine.......................................... 100 (45.4)
2,2,4-Trimethylpentane.................................. 1000 (454)
1,3,5-Trinitrobenzene................................... 10 (4.54)
1,3,5-Trioxane, 2,4,6-trimethyl-........................ 1000 (454)
Tris(2,3-dibromopropyl) phosphate....................... 10 (4.54)
Trypan blue............................................. 10 (4.54)
Uracil mustard.......................................... 10 (4.54)
Uranyl acetate.......................................... 100 (45.4)
Uranyl nitrate.......................................... 100 (45.4)
Urea, N-ethyl-N-nitroso-................................ 1 (0.454)
Urea, N-methyl-N-nitroso-............................... 1 (0.454)
Vanadic acid, ammonium salt............................. 1000 (454)
Vanadium oxide V205..................................... 1000 (454)
Vanadium pentoxide...................................... 1000 (454)
Vanadyl sulfate......................................... 1000 (454)
Vinyl acetate........................................... 5000 (2270)
[[Page 311]]
Vinyl acetate monomer................................... 5000 (2270)
Vinylamine, N-methyl-N-nitroso-......................... 10 (4.54)
Vinyl bromide........................................... 100 (45.4)
Vinyl chloride.......................................... 1 (0.454)
Vinylidene chloride..................................... 100 (45.4)
Warfarin, & salts, when present at concentrations 100 (45.4)
greater than 0.3%......................................
Xylene.................................................. 100 (45.4)
m-Xylene................................................ 1000 (454)
o-Xylene................................................ 1000 (454)
p-Xylene................................................ 100 (45.4)
Xylene (mixed).......................................... 100 (45.4)
Xylenes (isomers and mixture)........................... 100 (45.4)
Xylenol................................................. 1000 (454)
Yohimban-16-carboxylic acid,11,17-dimethoxy-18-[(3,4,5- 5000 (2270)
trimethoxybenzoyl)oxy]-,...............................
methyl ester (3beta,16beta,17alpha,18beta,20alpha)-.....
Zinc [cent]............................................. 1000 (454)
Zinc acetate............................................ 1000 (454)
Zinc ammonium chloride.................................. 1000 (454)
Zinc borate............................................. 1000 (454)
Zinc bromide............................................ 1000 (454)
Zinc carbonate.......................................... 1000 (454)
Zinc chloride........................................... 1000 (454)
Zinc cyanide............................................ 10 (4.54)
Zinc cyanide Zn(CN)2.................................... 10 (4.54)
Zinc fluoride........................................... 1000 (454)
Zinc formate............................................ 1000 (454)
Zinc hydrosulfite....................................... 1000 (454)
Zinc nitrate............................................ 1000 (454)
Zinc phenolsulfonate.................................... 5000 (2270)
Zinc phosphide.......................................... 100 (45.4)
Zinc phosphide Zn3P2, when present at concentrations 100 (45.4)
greater than 10%.......................................
Zinc silicofluoride..................................... 5000 (2270)
Zinc sulfate............................................ 1000 (454)
Zirconium nitrate....................................... 5000 (2270)
Zirconium potassium fluoride............................ 1000 (454)
Zirconium sulfate....................................... 5000 (2270)
Zirconium tetrachloride................................. 5000 (2270)
D001 Unlisted Hazardous Wastes Characteristic of 100 (45.4)
Ignitability...........................................
D002 Unlisted Hazardous Wastes Characteristic of 100 (45.4)
Corrosivity............................................
D003 Unlisted Hazardous Wastes Characteristic of 100 (45.4)
Reactivity.............................................
D004-D043 Unlisted Hazardous Wastes Characteristic of ..............
Toxicity...............................................
D004 Arsenic........................................ 1 (0.454)
D005 Barium......................................... 1000 (454)
D006 Cadmium........................................ 10 (4.54)
D007 Chromium....................................... 10 (4.54)
D008 Lead........................................... 10 (4.54)
D009 Mercury........................................ 1 (0.454)
D010 Selenium....................................... 10 (4.54)
D011 Silver......................................... 1 (0.454)
D012 Endrin......................................... 1 (0.454)
D013 Lindane........................................ 1 (0.454)
D014 Methoxychlor................................... 1 (0.454)
D015 Toxaphene...................................... 1 (0.454)
D016 2,4-D.......................................... 100 (45.4)
D017 2,4,5-TP....................................... 100 (45.4)
D018 Benzene........................................ 10 (4.54)
D019 Carbon tetrachloride........................... 10 (4.54)
D020 Chlordane...................................... 1 (0.454)
D021 Chlorobenzene.................................. 100 (45.4)
D022 Chloroform..................................... 10 (4.54)
D023 o-Cresol........................................... 100 (45.4)
D024 m-Cresol........................................... 100 (45.4)
D025 p-Cresol........................................... 100 (45.4)
D026 Cresol............................................. 100 (45.4)
D027 1,4-Dichlorobenzene............................ 100 (45.4)
D028 1,2-Dichloroethane............................. 100 (45.4)
D029 1,1-Dichloroethylene........................... 100 (45.4)
D030 2,4-Dinitrotoluene............................. 10 (4.54)
D031 Heptachlor (and hydroxide)..................... 1 (0.454)
D032 Hexachlorobenzene.............................. 10 (4.54)
[[Page 312]]
D033 Hexachlorobutadiene............................ 1 (0.454)
D034 Hexachloroethane............................... 100 (45.4)
D035 Methyl ethyl ketone............................ 5000 (2270)
D036 Nitrobenzene................................... 1000 (454)
D037 Pentachlorophenol.............................. 10 (4.54)
D038 Pyridine....................................... 1000 (454)
D039 Tetrachloroethylene............................ 100 (45.4)
D040 Tricholorethylene.............................. 100 (45.4)
D041 2,4,5-Trichlorophenol.......................... 10 (4.54)
D042 2,4,6-Trichlorophenol.......................... 10 (4.54)
D043 Vinyl chloride................................. 1 (0.454)
F001.................................................... 10 (4.54)
The following spent halogenated solvents used in
degreasing; all spent solvent mixtures/blends used in
degreasing containing, before use, a total of ten
percent or more (by volume) of one or more of the below
listed halogenated solvents or those solvents listed in
F002, F004 and F005; and still bottoms from the
recovery of these spent solvents and spent solvent
mixtures...............................................
(a) Tetrachloroethylene............................. 100 (45.4)
(b) Trichloroethylene............................... 100 (45.4)
(c) Methylene chloride.............................. 1000 (454)
(d) 1,1,1-Trichloroethane........................... 1000 (454)
(e) Carbon tetrachloride............................ 10 (4.54)
(f) Chlorinated fluorocarbons....................... 5000 (2270)
F002.................................................... 10 (4.54)
The following spent halogenated solvents; all spent
solvent mixtures/blends containing, before use, a total
of ten percent or more (by volume) of one or more of
the below listed halogenated solvents or those listed
in F001, F004, F005; and still bottoms from the
recovery of these spent solvents and spent solvent
mixtures...............................................
(a) Tetrachloroethylene............................. 100 (45.4)
(b) Methylene chloride.............................. 1000 (454)
(c) Trichloroethylene............................... 100 (45.4)
(d) 1,1,1-Trichloroethane........................... 1000 (454)
(e) Chlorobenzene................................... 100 (45.4)
(f) 1,1,2-Trichloro-1,2,2-trifluoroethane........... 5000 (2270)
(g) o-Dichlorobenzene............................... 100 (45.4)
(h) Trichlorofluoromethane.......................... 5000 (2270)
(i) 1,1,2 Trichloroethane........................... 100 (45.4)
F003.................................................... 100 (45.4)
The following spent non-halogenated solvents and
solvents:..............................................
(a) Xylene.......................................... 1000 (454)
(b) Acetone......................................... 5000 (2270)
(c) Ethyl acetate................................... 5000 (2270)
(d) Ethylbenzene.................................... 1000 (454)
(e) Ethyl ether..................................... 100 (45.4)
(f) Methyl isobutyl ketone.......................... 5000 (2270)
(g) n-Butyl alcohol................................. 5000 (2270)
(h) Cyclohexanone................................... 5000 (2270)
(i) Methanol........................................ 5000 (2270)
F004.................................................... 100 (45.4)
The following spent non-halogenated solvents and the
still bottoms from the recovery of these solvents:.....
(a) Cresols/Cresylic acid........................... 1000 (454)
(b) Nitrobenzene.................................... 100 (45.4)
F005.................................................... 100 (45.4)
The following spent non-halogenated solvents and the
still bottoms from the recovery of these solvents:.....
(a) Toluene......................................... 1000 (454)
(b) Methyl ethyl ketone............................. 5000 (2270)
(c) Carbon disulfide................................ 100 (45.4)
(d) Isobutanol...................................... 5000 (2270)
(e) Pyridine........................................ 1000 (454)
F006.................................................... 10 (4.54)
Wastewater treatment sludges from electroplating
operations except from the following processes: (1)
sulfuric acid anodizing of aluminum, (2) tin plating on
carbon steel, (3) zinc plating (segregated basis) on
carbonsteel, (4) aluminum or zinc-aluminum plating on
carbon steel, (5) cleaning/stripping associated with
tin, zinc and aluminum plating on carbon steel, and (6)
chemical etching and milling of aluminum...............
F007.................................................... 10 (4.54)
Spent cyanide plating bath solutions from electroplating
operations.............................................
F008.................................................... 10 (4.54)
Plating bath residues from the bottom of plating baths
from electroplating operations where cyanides are used
in the process.........................................
F009.................................................... 10 (4.54)
Spent stripping and cleaning bath solutions from
electroplating operations where cyanides are used in
the process............................................
[[Page 313]]
F010.................................................... 10 (4.54)
Quenching bath residues from oil baths from metal heat
treating operations where cyanides are used in the
process................................................
F011.................................................... 10 (4.54)
Spent cyanide solutions from salt bath pot cleaning from
metal heat treating operations (except for precious
metals heat treating spent cyanide solutions from salt
bath pot cleaning).....................................
F012.................................................... 10 (4.54)
Quenching wastewater treatment sludges from metal heat
treating operations where cyanides are used in the
process................................................
F019.................................................... 10 (4.54)
Wastewater treatment sludges from the chemical
conversion coating of aluminum--except from zirconium
phosphating in aluminum can washing when such
phosphating is an exclusive conversion coating process.
F020.................................................... 1 (0.454)
Wastes (except wastewater and spent carbon from hydrogen
chloride purification) from the production or
manufacturing use (as a reactant, chemical
intermediate, or component in a formulating process) of
tri- or tetrachlorophenol, or of intermediates used to
produce their pesticide derivatives. (This listing does
not include wastes from the production of
hexachlorophene from highly purified 2,4,5-
trichlorophenol.)......................................
F021.................................................... 1 (0.454)
Wastes (except wastewater and spent carbon from hydrogen
chloride purification) from the production or
manufacturing use (as a reactant, chemical
intermediate, or component in a formulating process) of
pentachlorophenol, or of intermediates used to produce
its derivatives........................................
F022.................................................... 1 (0.454)
Wastes (except wastewater and spent carbon from hydrogen
chloride purification) from the manufacturing use (as a
reactant, chemical intermediate, or component in a
formulating process) of tetra-, penta-, or
hexachlorobenzenes under alkaline conditions...........
F023.................................................... 1 (0.454)
Wastes (except wastewater and spent carbon from hydrogen
chloride purification) from the production of materials
on equipment previously used for the production or
manufacturing use (as a reactant, chemical
intermediate, or component in a formulating process) of
tri- and tetrachlorophenols. (This listing does not
include wastes from equipment used only for the
production or use of hexachlorophene from highly
purified 2,4,5-trichlorophenol.).......................
F024.................................................... 1 (0.454)
Wastes, including but not limited to distillation
residues, heavy ends, tars, and reactor cleanout
wastes, from the production of chlorinated
aliphatichydrocarbons, having carbon content from one
to five, utilizing free radical catalyzed processes.
(This listing does not include light ends, spent
filters and filter aids, spent dessicants(sic),
wastewater, wastewater treatment sludges, spent
catalysts, and wastes listed in 40 CFR 261.32.)........
F025.................................................... 1 (0.454)
Condensed light ends, spent filters and filter aids, and
spent desiccant wastes from the production of certain
chlorinated aliphatic hydrocarbons, by free radical
catalyzed processes. These chlorinated aliphatic
hydrocarbons are those having carbon chain lengths
ranging from one to and including five, with varying
amounts and positions of chlorine substitution.........
F026.................................................... 1 (0.454)
Wastes (except wastewater and spent carbon from hydrogen
chloride purification) from the production of materials
on equipment previously used for the manufacturing use
(as a reactant, chemical intermediate, or component in
a formulating process) of tetra-, penta-, or
hexachlorobenzene under alkaline conditions............
F027.................................................... 1 (0.454)
Discarded unused formulations containing tri-, tetra-,
or pentachlorophenol or discarded unused formulations
containing compounds derived from these chlorophenols.
(This listing does not include formulations containing
hexachlorophene synthesized from prepurified 2,4,5-
trichlorophenol as the sole component.)................
F028.................................................... 1 (0.454)
Residues resulting from the incineration or thermal
treatment of soil contaminated with EPA Hazardous Waste
Nos. F020, F021, F022, F023, F026, and F027............
F032.................................................... 1 (0.454)
F034.................................................... 1 (0.454)
F035.................................................... 1 (0.454)
F037.................................................... 1 (0.454)
F038.................................................... 1 (0.454)
F039.................................................... 1 (0.454)
Multi source leachate...................................
K001.................................................... 1 (0.454)
Bottom sediment sludge from the treatment of wastewaters
from wood preserving processes that use creosote and/or
pentachlorophenol......................................
K002.................................................... 10 (4.54)
Wastewater treatment sludge from the production of
chrome yellow and orange pigments......................
K003.................................................... 10 (4.54)
Wastewater treatment sludge from the production of
molybdate orange pigments..............................
K004.................................................... 10 (4.54)
Wastewater treatment sludge from the production of zinc
yellow pigments........................................
[[Page 314]]
K005.................................................... 10 (4.54)
Wastewater treatment sludge from the production of
chrome green pigments..................................
K006.................................................... 10 (4.54)
Wastewater treatment sludge from the production of
chrome oxide green pigments (anhydrous and hydrated)...
K007.................................................... 10 (4.54)
Wastewater treatment sludge from the production of iron
blue pigments..........................................
K008.................................................... 10 (4.54)
Oven residue from the production of chrome oxide green
pigments...............................................
K009.................................................... 10 (4.54)
Distillation bottoms from the production of acetaldehyde
from ethylene..........................................
K010.................................................... 10 (4.54)
Distillation side cuts from the production of
acetaldehyde from ethylene.............................
K011.................................................... 10 (4.54)
Bottom stream from the wastewater stripper in the
production of acrylonitrile............................
K013.................................................... 10 (4.54)
Bottom stream from the acetonitrile column in the
production of acrylonitrile............................
K014.................................................... 5000 (2270)
Bottoms from the acetonitrile purification column in the
production of acrylonitrile............................
K015.................................................... 10 (4.54)
Still bottoms from the distillation of benzyl chloride..
K016.................................................... 1 (0.454)
Heavy ends or distillation residues from the production
of carbon tetrachloride................................
K017.................................................... 10 (4.54)
Heavy ends (still bottoms) from the purification column
in the production of epichlorohydrin...................
K018.................................................... 1 (0.454)
Heavy ends from the fractionation column in ethyl
chloride production....................................
K019.................................................... 1 (0.454)
Heavy ends from the distillation of ethylene dichloride
in ethylene dichloride production......................
K020.................................................... 1 (0.454)
Heavy ends from the distillation of vinyl chloride in
vinyl chloride monomer production......................
K021.................................................... 10 (4.54)
Aqueous spent antimony catalyst waste from
fluoromethanes production..............................
K022.................................................... 1 (0.454)
Distillation bottom tars from the production of phenol/
acetone from cumene....................................
K023.................................................... 5000 (2270)
Distillation light ends from the production of phthalic
anhydride from naphthalene.............................
K024.................................................... 5000 (2270)
Distillation bottoms from the production of phthalic
anhydride from naphthalene.............................
K025.................................................... 10 (4.54)
Distillation bottoms from the production of nitrobenzene
by the nitration of benzene............................
K026.................................................... 1000 (454)
Stripping still tails from the production of methyl
ethyl pyridines........................................
K027.................................................... 10 (4.54)
Centrifuge and distillation residues from toluene
diisocyanate production................................
K028.................................................... 1 (0.454)
Spent catalyst from the hydrochlorinator reactor in the
production of 1,1,1-trichloroethane....................
K029.................................................... 1 (0.454)
Waste from the product steam stripper in the production
of 1,1,1-trichloroethane...............................
K030.................................................... 1 (0.454)
Column bottoms or heavy ends from the combined
production of trichloroethylene and perchloroethylene..
K031.................................................... 1 (0.454)
By-product salts generated in the production of MSMA and
cacodylic acid.........................................
K032.................................................... 10 (4.54)
Wastewater treatment sludge from the production of
chlordane..............................................
K033.................................................... 10 (4.54)
Wastewater and scrub water from the chlorination of
cyclopentadiene in the production of chlordane.........
K034.................................................... 10 (4.54)
Filter solids from the filtration of
hexachlorocyclopentadiene in the production of
chlordane..............................................
K035.................................................... 1 (0.454)
Wastewater treatment sludges generated in the production
of creosote............................................
K036.................................................... 1 (0.454)
Still bottoms from toluene reclamation distillation in
the production of disulfoton...........................
K037.................................................... 1 (0.454)
Wastewater treatment sludges from the production of
disulfoton.............................................
K038.................................................... 10 (4.54)
Wastewater from the washing and stripping of phorate
production.............................................
K039.................................................... 10 (4.54)
Filter cake from the filtration of
diethylphosphorodithioic acid in the production of
phorate................................................
K040.................................................... 10 (4.54)
Wastewater treatment sludge from the production of
phorate................................................
[[Page 315]]
K041.................................................... 1 (0.454)
Wastewater treatment sludge from the production of
toxaphene..............................................
K042.................................................... 10 (4.54)
Heavy ends or distillation residues from the
distillation of tetrachlorobenzene in the production of
2,4,5-T................................................
K043.................................................... 10 (4.54)
2,6-dichlorophenol waste from the production of 2,4-D...
K044.................................................... 10 (4.54)
Wastewater treatment sludges from the manufacturing and
processing of explosives...............................
K045.................................................... 10 (4.54)
Spent carbon from the treatment of wastewater containing
explosives.............................................
K046.................................................... 10 (4.54)
Wastewater treatment sludges from the manufacturing,
formulation and loading of lead-based initiating
compounds..............................................
K047.................................................... 10 (4.54)
Pink/red water from TNT operations......................
K048.................................................... 10 (4.54)
Dissolved air flotation (DAF) float from the petroleum
refining industry......................................
K049.................................................... 10 (4.54)
Slop oil emulsion solids from the petroleum refining
industry...............................................
K050.................................................... 10 (4.54)
Heat exchanger bundle cleaning sludge from the petroleum
refining industry......................................
K051.................................................... 10 (4.54)
API separator sludge from the petroleum refining
industry...............................................
K052.................................................... 10 (4.54)
Tank bottoms (leaded) from the petroleum refining
industry...............................................
K060.................................................... 1 (0.454)
Ammonia still lime sludge from coking operations........
K061.................................................... 10 (4.54)
Emission control dust/sludge from the primary production
of steel in electric furnaces..........................
K062.................................................... 10 (4.54)
Spent pickle liquor generated by steel finishing
operations of facilities within the iron and steel
industry...............................................
K064.................................................... 10 (4.54)
Acid plant blowdown slurry/sludge resulting from
thickening of blowdown slurry from primary copper
production.............................................
K065.................................................... 10 (4.54)
Surface impoundment solids contained in and dredged from
surface impoundments at primary lead smelting
facilities.............................................
K066.................................................... 10 (4.54)
Sludge from treatment of process wastewater and /or acid
plant blowdown from primary zinc production............
K069.................................................... 10 (4.54)
Emission control dust/sludge from secondary lead
smelting...............................................
K071.................................................... 1 (0.454)
Brine purification muds from the mercury cell process in
chlorine production, where separately prepurified brine
is not used............................................
K073.................................................... 10 (4.54)
Chlorinated hydrocarbon waste from the purification step
of the diaphragm cell process using graphite anodes in
chlorine production....................................
K083.................................................... 100 (45.4)
Distillation bottoms from aniline extraction............
K084.................................................... 1 (0.454)
Wastewater treatment sludges generated during the
production of veterinary pharmaceuticals from arsenic
or organo-arsenic compounds............................
K085.................................................... 10 (4.54)
Distillation or fractionation column bottoms from the
production of chlorobenzenes...........................
K086.................................................... 10 (4.54)
Solvent washes and sludges, caustic washes and sludges,
or water washes and sludges from cleaning tubs and
equipment used in the formulation of ink from pigments,
driers, soaps, and stabilizers containing chromium and
lead...................................................
K087.................................................... 100 (45.4)
Decanter tank tar sludge from coking operations.........
K088.................................................... 10 (4.54)
Spent potliners from primary aluminum reduction.........
K090.................................................... 10 (4.54)
Emission control dust or sludge from
ferrochromiumsilicon production........................
K091.................................................... 10 (4.54)
Emission control dust or sludge from ferrochromium
production.............................................
K093.................................................... 5000 (2270)
Distillation light ends from the production of phthalic
anhydride from ortho-xylene............................
K094.................................................... 5000 (2270)
Distillation bottoms from the production of phthalic
anhydride from ortho-xylene............................
[[Page 316]]
K095.................................................... 100 (45.4)
Distillation bottoms from the production of 1,1,1-
trichloroethane........................................
K096.................................................... 100 (45.4)
Heavy ends from the heavy ends column from the
production of 1,1,1-trichloroethane....................
K097.................................................... 1 (0.454)
Vacuum stripper discharge from the chlordane chlorinator
in the production of chlordane.........................
K098.................................................... 1 (0.454)
Untreated process wastewater from the production of
toxaphene..............................................
K099.................................................... 10 (4.54)
Untreated wastewater from the production of 2,4-D.......
K100.................................................... 10 (4.54)
Waste leaching solution from acid leaching of emission
control dust/sludge from secondary lead smelting.......
K101.................................................... 1 (0.454)
Distillation tar residues from the distillation of
aniline-based compounds in the production of veterinary
pharmaceuticals from arsenic or organo-arsenic
compounds..............................................
K102.................................................... 1 (0.454)
Residue from the use of activated carbon for
decolorization in the production of veterinary
pharmaceuticals from arsenic or organo-arsenic
compounds..............................................
K103.................................................... 100 (45.4)
Process residues from aniline extraction from the
production of aniline..................................
K104.................................................... 10 (4.54)
Combined wastewater streams generated from nitrobenzene/
aniline chlorobenzenes.................................
K105.................................................... 10 (4.54)
Separated aqueous stream from the reactor product
washing step in the production of chlorobenzenes.......
K106.................................................... 1 (0.454)
Wastewater treatment sludge from the mercury cell
process in chlorine production.........................
K107.................................................... 10 (4.54)
Column bottoms from product seperation from the
production of 1,1-dimethylhydrazine (UDMH) from
carboxylic acid hydrazines.............................
K108.................................................... 10 (4.54)
Condensed column overheads from product seperation and
condensed reactor vent gases from the production of 1,1-
dimethylhydrazine (UDMH) from carboxylic acid
hydrazides.............................................
K109.................................................... 10 (4.54)
Spent filter cartidges from product purification from
the production of 1,1-dimethylhydrazine (UDMH) from
carboxylic acid hydazides..............................
K110.................................................... 10 (4.54)
Condensed column overheads from intermediate separation
from the production of 1,1-dimethylhydrazines (UDMH)
from carboxylic acid hydrazides........................
K111.................................................... 10 (4.54)
Product washwaters from the production of dinitrotoluene
via nitration of toluene...............................
K112.................................................... 10 (4.54)
Reaction by-product water from the drying column in the
production of toluenediamine via hydrogenation of
dinitrotoluene.........................................
K113.................................................... 10 (4.54)
Condensed liquid light ends from the purification of
toluenediamine in the production of toluenediamine via
hydrogenation of dinitrotoluene........................
K114.................................................... 10 (4.54)
Vicinals from the purification of toluenediamine in the
production of toluenediamine via hydrogenation of
dinitrotoluene.........................................
K115.................................................... 10 (4.54)
Heavy ends from the purification of toluenediamine in
the production of toluenediamine via hydrogenation of
dinitrotoluene.........................................
K116.................................................... 10 (4.54)
Organic condensate from the solvent recovery column in
the production of toluene diisocyanate via phosgenation
of toluenediamine......................................
K117.................................................... 1 (0.454)
Wastewater from the reaction vent gas scrubber in the
production of ethylene bromide via bromination of
ethene.................................................
K118.................................................... 1 (0.454)
Spent absorbent solids from purification of ethylene
dibromide in the production of ethylene dibromide......
K123.................................................... 10 (4.54)
Process wastewater (including supernates, filtrates, and
washwaters) from the production of
ethylenebisdithiocarbamic acid and its salts...........
K124.................................................... 10 (4.54)
Reactor vent scrubber water from the production of
ethylenebisdithiocarbamic acid and its salts...........
K125.................................................... 10 (4.54)
Filtration, evaporation, and centrifugation solids from
the production of ethylenebisdithiocarbamic acid and
its salts..............................................
[[Page 317]]
K126.................................................... 10 (4.54)
Baghouse dust and floor sweepings in milling and
packaging operations from the production or formulation
of ethylenebisdithiocarbamic acid and its salts........
K131.................................................... 100 (45.4)
Waste water from the reactor and spent sulfuric acid
from the acid dryer in the production of methyl bromide
K132.................................................... 1000 (454)
Spent absorbent and wastewater solids from the
production of methyl bromide...........................
K136.................................................... 1 (0.454)
Still bottoms from the purification of ethylene
dibromide in the production of ethylene dibromide via
bromination of ethene..................................
K141.................................................... 1 (0.454)
K142.................................................... 1 (0.454)
K143.................................................... 1 (0.454)
K144.................................................... 1 (0.454)
K145.................................................... 1 (0.454)
K147.................................................... 1 (0.454)
K148.................................................... 1 (0.454)
K149.................................................... 10 (4.54)
K150.................................................... 10 (4.54)
K151.................................................... 10 (4.54)
K156.................................................... 1 (0.454)
K157.................................................... 1 (0.454)
K158.................................................... 1 (0.454)
K169.................................................... 10 (4.54)
K170.................................................... 1 (0.454)
K171.................................................... 1 (0.454)
K172.................................................... 1 (0.454)
K174.................................................... 1 (0.454)
K175.................................................... 1 (0.454)
K176.................................................... 1 (0.454)
K177.................................................... 5000 (2270)
K178.................................................... 1 (0.454)
------------------------------------------------------------------------
Footnotes:
[cent] The RQ for these hazardous substances is limited to those pieces
of the metal having a diameter smaller than 100 micrometers (0.004
inches)
[cent][cent] The RQ for asbestos is limited to friable forms only
@ Indicates that the name was added by PHMSA because (1) the name is a
synonym for a specific hazardous substance and (2) the name appears in
the Hazardous Materials Table as a proper shipping name.
List of Hazardous Substances and Reportable Quantities
Table 2 to Appendix A--Radionuclides
------------------------------------------------------------------------
(3)--Reportable
(1)--Radionuclide (2)--Atomic Quantity (RQ) Ci
Number (TBq)
------------------------------------------------------------------------
Actinium-224............................. 89 100 (3.7)
Actinium-225............................. 89 1 (.037)
Actinium-226............................. 89 10 (.37)
Actinium-227............................. 89 0.001 (.000037)
Actinium-228............................. 89 10 (.37)
Aluminum-26.............................. 13 10 (.37)
Americium-237............................ 95 1000 (37)
Americium-238............................ 95 100 (3.7)
Americium-239............................ 95 100 (3.7)
Americium-240............................ 95 10 (.37)
Americium-241............................ 95 0.01 (.00037)
Americium-242............................ 95 100 (3.7)
Americium-242m........................... 95 0.01 (.00037)
Americium-243............................ 95 0.01 (.00037)
Americium-244............................ 95 10 (.37)
Americium-244m........................... 95 1000 (37)
Americium-245............................ 95 1000 (37)
Americium-246............................ 95 1000 (37)
Americium-246m........................... 95 1000 (37)
Antimony-115............................. 51 1000 (37)
Antimony-116............................. 51 1000 (37)
Antimony-116m............................ 51 100 (3.7)
Antimony-117............................. 51 1000 (37)
Antimony-118m............................ 51 10 (.37)
Antimony-119............................. 51 1000 (37)
Antimony-120 (16 min).................... 51 1000 (37)
Antimony-120 (5.76 day).................. 51 10 (.37)
Antimony-122............................. 51 10 (.37)
Antimony-124............................. 51 10 (.37)
Antimony-124m............................ 51 1000 (37)
Antimony-125............................. 51 10 (.37)
Antimony-126............................. 51 10 (.37)
Antimony-126m............................ 51 1000 (37)
Antimony-127............................. 51 10 (.37)
Antimony-128 (10.4 min).................. 51 1000 (37)
Antimony-128 (9.01 hr)................... 51 10 (.37)
Antimony-129............................. 51 100 (3.7)
Antimony-130............................. 51 100 (3.7)
Antimony-131............................. 51 1000 (37)
[[Page 318]]
Argon-39................................. 18 1000 (37)
Argon-41................................. 18 10 (.37)
Arsenic-69............................... 33 1000 (37)
Arsenic-70............................... 33 100 (3.7)
Arsenic-71............................... 33 100 (3.7)
Arsenic-72............................... 33 10 (.37)
Arsenic-73............................... 33 100 (3.7)
Arsenic-74............................... 33 10 (.37)
Arsenic-76............................... 33 100 (3.7)
Arsenic-77............................... 33 1000 (37)
Arsenic-78............................... 33 100 (3.7)
Astatine-207............................. 85 100 (3.7)
Astatine-211............................. 85 100 (3.7)
Barium-126............................... 56 1000 (37)
Barium-128............................... 56 10 (.37)
Barium-131............................... 56 10 (.37)
Barium-131m.............................. 56 1000 (37)
Barium-133............................... 56 10 (.37)
Barium-133m.............................. 56 100 (3.7)
Barium-135m.............................. 56 1000 (37)
Barium-139............................... 56 1000 (37)
Barium-140............................... 56 10 (.37)
Barium-141............................... 56 1000 (37)
Barium-142............................... 56 1000 (37)
Berkelium-245............................ 97 100 (3.7)
Berkelium-246............................ 97 10 (.37)
Berkelium-247............................ 97 0.01 (.00037)
Berkelium-249............................ 97 1 (.037)
Berkelium-250............................ 97 100 (3.7)
Beryllium-10............................. 4 1 (.037)
Beryllium-7.............................. 4 100 (3.7)
Bismuth-200.............................. 83 100 (3.7)
Bismuth-201.............................. 83 100 (3.7)
Bismuth-202.............................. 83 1000 (37)
Bismuth-203.............................. 83 10 (.37)
Bismuth-205.............................. 83 10 (.37)
Bismuth-206.............................. 83 10 (.37)
Bismuth-207.............................. 83 10 (.37)
Bismuth-210.............................. 83 10 (.37)
Bismuth-210m............................. 83 0.1 (.0037)
Bismuth-212.............................. 83 100 (3.7)
Bismuth-213.............................. 83 100 (3.7)
Bismuth-214.............................. 83 100 (3.7)
Bromine-74............................... 35 100 (3.7)
Bromine-74m.............................. 35 100 (3.7)
Bromine-75............................... 35 100 (3.7)
Bromine-76............................... 35 10 (.37)
Bromine-77............................... 35 100 (3.7)
Bromine-80............................... 35 1000 (37)
Bromine-80m.............................. 35 1000 (37)
Bromine-82............................... 35 10 (.37)
Bromine-83............................... 35 1000 (37)
Bromine-84............................... 35 100 (3.7)
Cadmium-104.............................. 48 1000 (37)
Cadmium-107.............................. 48 1000 (37)
Cadmium-109.............................. 48 1 (.037)
Cadmium-113.............................. 48 0.1 (.0037)
Cadmium-113m............................. 48 0.1 (.0037)
Cadmium-115.............................. 48 100 (3.7)
Cadmium-115m............................. 48 10 (.37)
Cadmium-117.............................. 48 100 (3.7)
Cadmium-117m............................. 48 10 (.37)
Calcium-41............................... 20 10 (.37)
Calcium-45............................... 20 10 (.37)
Calcium-47............................... 20 10 (.37)
Californium-244.......................... 98 1000 (37)
Californium-246.......................... 98 10 (.37)
Californium-248.......................... 98 0.1 (.0037)
Californium-249.......................... 98 0.01 (.00037)
Californium-250.......................... 98 0.01 (.00037)
Californium-251.......................... 98 0.01 (.00037)
Californium-252.......................... 98 0.1 (.0037)
Californium-253.......................... 98 10 (.37)
Californium-254.......................... 98 0.1 (.0037)
Carbon-11................................ 6 1000 (37)
Carbon-14................................ 6 10 (.37)
Cerium-134............................... 58 10 (.37)
Cerium-135............................... 58 10 (.37)
Cerium-137............................... 58 1000 (37)
Cerium-137m.............................. 58 100 (3.7)
Cerium-139............................... 58 100 (3.7)
Cerium-141............................... 58 10 (.37)
Cerium-143............................... 58 100 (3.7)
Cerium-144............................... 58 1 (.037)
Cesium-125............................... 55 1000 (37)
Cesium-127............................... 55 100 (3.7)
Cesium-129............................... 55 100 (3.7)
Cesium-130............................... 55 1000 (37)
Cesium-131............................... 55 1000 (37)
Cesium-132............................... 55 10 (.37)
Cesium-134............................... 55 1 (.037)
Cesium-134m.............................. 55 1000 (37)
Cesium-135............................... 55 10 (.37)
Cesium-135m.............................. 55 100 (3.7)
Cesium-136............................... 55 10 (.37)
Cesium-137............................... 55 1 (.037)
Cesium-138............................... 55 100 (3.7)
Chlorine-36.............................. 17 10 (.37)
Chlorine-38.............................. 17 100 (3.7)
Chlorine-39.............................. 17 100 (3.7)
Chromium-48.............................. 24 100 (3.7)
Chromium-49.............................. 24 1000 (37)
Chromium-51.............................. 24 1000 (37)
Cobalt-55................................ 27 10 (.37)
Cobalt-56................................ 27 10 (.37)
Cobalt-57................................ 27 100 (3.7)
Cobalt-58................................ 27 10 (.37)
Cobalt-58m............................... 27 1000 (37)
Cobalt-60................................ 27 10 (.37)
Cobalt-60m............................... 27 1000 (37)
Cobalt-61................................ 27 1000 (37)
Cobalt-62m............................... 27 1000 (37)
Copper-60................................ 29 100 (3.7)
Copper-61................................ 29 100 (3.7)
Copper-64................................ 29 1000 (37)
Copper-67................................ 29 100 (3.7)
Curium-238............................... 96 1000 (37)
Curium-240............................... 96 1 (.037)
Curium-241............................... 96 10 (.37)
Curium-242............................... 96 1 (.037)
Curium-243............................... 96 0.01 (.00037)
Curium-244............................... 96 0.01 (.00037)
Curium-245............................... 96 0.01 (.00037)
Curium-246............................... 96 0.01 (.00037)
Curium-247............................... 96 0.01 (.00037)
Curium-248............................... 96 0.001 (.000037)
Curium-249............................... 96 1000 (37)
Dysprosium-155........................... 66 100 (3.7)
Dysprosium-157........................... 66 100 (3.7)
Dysprosium-159........................... 66 100 (3.7)
Dysprosium-165........................... 66 1000 (37)
Dysprosium-166........................... 66 10 (.37)
Einsteinium-250.......................... 99 10 (.37)
Einsteinium-251.......................... 99 1000 (37)
Einsteinium-253.......................... 99 10 (.37)
Einsteinium-254.......................... 99 0.1 (.0037)
[[Page 319]]
Einsteinium-254m......................... 99 1 (.037)
Erbium-161............................... 68 100 (3.7)
Erbium-165............................... 68 1000 (37)
Erbium-169............................... 68 100 (3.7)
Erbium-171............................... 68 100 (3.7)
Erbium-172............................... 68 10 (.37)
Europium-145............................. 63 10 (.37)
Europium-146............................. 63 10 (.37)
Europium-147............................. 63 10 (.37)
Europium-148............................. 63 10 (.37)
Europium-149............................. 63 100 (3.7)
Europium-150 (12.6 hr)................... 63 1000 (37)
Europium-150 (34.2 yr)................... 63 10 (.37)
Europium-152............................. 63 10 (.37)
Europium-152m............................ 63 100 (3.7)
Europium-154............................. 63 10 (.37)
Europium-155............................. 63 10 (.37)
Europium-156............................. 63 10 (.37)
Europium-157............................. 63 10 (.37)
Europium-158............................. 63 1000 (37)
Fermium-252.............................. 100 10 (.37)
Fermium-253.............................. 100 10 (.37)
Fermium-254.............................. 100 100 (3.7)
Fermium-255.............................. 100 100 (3.7)
Fermium-257.............................. 100 1 (.037)
Fluorine-18.............................. 9 1000 (37)
Francium-222............................. 87 100 (3.7)
Francium-223............................. 87 100 (3.7)
Gadolinium-145........................... 64 100 (3.7)
Gadolinium-146........................... 64 10 (.37)
Gadolinium-147........................... 64 10 (.37)
Gadolinium-148........................... 64 0.001 (.000037)
Gadolinium-149........................... 64 100 (3.7)
Gadolinium-151........................... 64 100 (3.7)
Gadolinium-152........................... 64 0.001 (.000037)
Gadolinium-153........................... 64 10 (.37)
Gadolinium-159........................... 64 1000 (37)
Gallium-65............................... 31 1000 (37)
Gallium-66............................... 31 10 (.37)
Gallium-67............................... 31 100 (3.7)
Gallium-68............................... 31 1000 (37)
Gallium-70............................... 31 1000 (37)
Gallium-72............................... 31 10 (.37)
Gallium-73............................... 31 100 (3.7)
Germanium-66............................. 32 100 (3.7)
Germanium-67............................. 32 1000 (37)
Germanium-68............................. 32 10 (.37)
Germanium-69............................. 32 10 (.37)
Germanium-71............................. 32 1000 (37)
Germanium-75............................. 32 1000 (37)
Germanium-77............................. 32 10 (.37)
Germanium-78............................. 32 1000 (37)
Gold-193................................. 79 100 (3.7)
Gold-194................................. 79 10 (.37)
Gold-195................................. 79 100 (3.7)
Gold-198................................. 79 100 (3.7)
Gold-198m................................ 79 10 (.37)
Gold-199................................. 79 100 (3.7)
Gold-200................................. 79 1000 (37)
Gold-200m................................ 79 10 (.37)
Gold-201................................. 79 1000 (37)
Hafnium-170.............................. 72 100 (3.7)
Hafnium-172.............................. 72 1 (.037)
Hafnium-173.............................. 72 100 (3.7)
Hafnium-175.............................. 72 100 (3.7)
Hafnium-177m............................. 72 1000 (37)
Hafnium-178m............................. 72 0.1 (.0037)
Hafnium-179m............................. 72 100 (3.7)
Hafnium-180m............................. 72 100 (3.7)
Hafnium-181.............................. 72 10 (.37)
Hafnium-182.............................. 72 0.1 (.0037)
Hafnium-182m............................. 72 100 (3.7)
Hafnium-183.............................. 72 100 (3.7)
Hafnium-184.............................. 72 100 (3.7)
Holmium-155.............................. 67 1000 (37)
Holmium-157.............................. 67 1000 (37)
Holmium-159.............................. 67 1000 (37)
Holmium-161.............................. 67 1000 (37)
Holmium-162.............................. 67 1000 (37)
Holmium-162m............................. 67 1000 (37)
Holmium-164.............................. 67 1000 (37)
Holmium-164m............................. 67 1000 (37)
Holmium-166.............................. 67 100 (3.7)
Holmium-166m............................. 67 1 (.037)
Holmium-167.............................. 67 100 (3.7)
Hydrogen-3............................... 1 100 (3.7)
Indium-109............................... 49 100 (3.7)
Indium-110 (4.9 hr)...................... 49 10 (.37)
Indium-110 (69.1 min).................... 49 100 (3.7)
Indium-111............................... 49 100 (3.7)
Indium-112............................... 49 1000 (37)
Indium-113m.............................. 49 1000 (37)
Indium-114m.............................. 49 10 (.37)
Indium-115............................... 49 0.1 (.0037)
Indium-115m.............................. 49 100 (3.7)
Indium-116m.............................. 49 100 (3.7)
Indium-117............................... 49 1000 (37)
Indium-117m.............................. 49 100 (3.7)
Indium-119m.............................. 49 1000 (37)
Iodine-120............................... 53 10 (.37)
Iodine-120m.............................. 53 100 (3.7)
Iodine-121............................... 53 100 (3.7)
Iodine-123............................... 53 10 (.37)
Iodine-124............................... 53 0.1 (.0037)
Iodine-125............................... 53 0.01 (.00037)
Iodine-126............................... 53 0.01 (.00037)
Iodine-128............................... 53 1000 (37)
Iodine-129............................... 53 0.001 (.000037)
Iodine-130............................... 53 1 (.037)
Iodine-131............................... 53 0.01 (.00037)
Iodine-132............................... 53 10 (.37)
Iodine-132m.............................. 53 10 (.37)
Iodine-133............................... 53 0.1 (.0037)
Iodine-134............................... 53 100 (3.7)
Iodine-135............................... 53 10 (.37)
Iridium-182.............................. 77 1000 (37)
Iridium-184.............................. 77 100 (3.7)
Iridium-185.............................. 77 100 (3.7)
Iridium-186.............................. 77 10 (.37)
Iridium-187.............................. 77 100 (3.7)
Iridium-188.............................. 77 10 (.37)
Iridium-189.............................. 77 100 (3.7)
Iridium-190.............................. 77 10 (.37)
Iridium-190m............................. 77 1000 (37)
Iridium-192.............................. 77 10 (.37)
Iridium-192m............................. 77 100 (3.7)
Iridium-194.............................. 77 100 (3.7)
Iridium-194m............................. 77 10 (.37)
Iridium-195.............................. 77 1000 (37)
Iridium-195m............................. 77 100 (3.7)
Iron-52.................................. 26 100 (3.7)
Iron-55.................................. 26 100 (3.7)
Iron-59.................................. 26 10 (.37)
Iron-60.................................. 26 0.1 (.0037)
Krypton-74............................... 36 10 (.37)
Krypton-76............................... 36 10 (.37)
[[Page 320]]
Krypton-77............................... 36 10 (.37)
Krypton-79............................... 36 100 (3.7)
Krypton-81............................... 36 1000 (37)
Krypton-83m.............................. 36 1000 (37)
Krypton-85............................... 36 1000 (37)
Krypton-85m.............................. 36 100 (3.7)
Krypton-87............................... 36 10 (.37)
Krypton-88............................... 36 10 (.37)
Lanthanum-131............................ 57 1000 (37)
Lanthanum-132............................ 57 100 (3.7)
Lanthanum-135............................ 57 1000 (37)
Lanthanum-137............................ 57 10 (.37)
Lanthanum-138............................ 57 1 (.037)
Lanthanum-140............................ 57 10 (.37)
Lanthanum-141............................ 57 1000 (37)
Lanthanum-142............................ 57 100 (3.7)
Lanthanum-143............................ 57 1000 (37)
Lead-195m................................ 82 1000 (37)
Lead-198................................. 82 100 (3.7)
Lead-199................................. 82 100 (3.7)
Lead-200................................. 82 100 (3.7)
Lead-201................................. 82 100 (3.7)
Lead-202................................. 82 1 (.037)
Lead-202m................................ 82 10 (.37)
Lead-203................................. 82 100 (3.7)
Lead-205................................. 82 100 (3.7)
Lead-209................................. 82 1000 (37)
Lead-210................................. 82 0.01 (.00037)
Lead-211................................. 82 100 (3.7)
Lead-212................................. 82 10 (.37)
Lead-214................................. 82 100 (3.7)
Lutetium-169............................. 71 10 (.37)
Lutetium-170............................. 71 10 (.37)
Lutetium-171............................. 71 10 (.37)
Lutetium-172............................. 71 10 (.37)
Lutetium-173............................. 71 100 (3.7)
Lutetium-174............................. 71 10 (.37)
Lutetium-174m............................ 71 10 (.37)
Lutetium-176............................. 71 1 (.037)
Lutetium-176m............................ 71 1000 (37)
Lutetium-177............................. 71 100 (3.7)
Lutetium-177m............................ 71 10 (.37)
Lutetium-178............................. 71 1000 (37)
Lutetium-178m............................ 71 1000 (37)
Lutetium-179............................. 71 1000 (37)
Magnesium-28............................. 12 10 (.37)
Manganese-51............................. 25 1000 (37)
Manganese-52............................. 25 10 (.37)
Manganese-52m............................ 25 1000 (37)
Manganese-53............................. 25 1000 (37)
Manganese-54............................. 25 10 (.37)
Manganese-56............................. 25 100 (3.7)
Mendelevium-257.......................... 101 100 (3.7)
Mendelevium-258.......................... 101 1 (.037)
Mercury-193.............................. 80 100 (3.7)
Mercury-193m............................. 80 10 (.37)
Mercury-194.............................. 80 0.1 (.0037)
Mercury-195.............................. 80 100 (3.7)
Mercury-195m............................. 80 100 (3.7)
Mercury-197.............................. 80 1000 (37)
Mercury-197m............................. 80 1000 (37)
Mercury-199m............................. 80 1000 (37)
Mercury-203.............................. 80 10 (.37)
Molybdenum-101........................... 42 1000 (37)
Molybdenum-90............................ 42 100 (3.7)
Molybdenum-93............................ 42 100 (3.7)
Molybdenum-93m........................... 42 10 (.37)
Molybdenum-99............................ 42 100 (3.7)
Neodymium-136............................ 60 1000 (37)
Neodymium-138............................ 60 1000 (37)
Neodymium-139............................ 60 1000 (37)
Neodymium-139m........................... 60 100 (3.7)
Neodymium-141............................ 60 1000 (37)
Neodymium-147............................ 60 10 (.37)
Neodymium-149............................ 60 100 (3.7)
Neodymium-151............................ 60 1000 (37)
Neptunium-232............................ 93 1000 (37)
Neptunium-233............................ 93 1000 (37)
Neptunium-234............................ 93 10 (.37)
Neptunium-235............................ 93 1000 (37)
Neptunium-236 (1.2 E 5 yr)............... 93 0.1 (.0037)
Neptunium-236 (22.5 hr).................. 93 100 (3.7)
Neptunium-237............................ 93 0.01 (.00037)
Neptunium-238............................ 93 10 (.37)
Neptunium-239............................ 93 100 (3.7)
Neptunium-240............................ 93 100 (3.7)
Nickel-56................................ 28 10 (.37)
Nickel-57................................ 28 10 (.37)
Nickel-59................................ 28 100 (3.7)
Nickel-63................................ 28 100 (3.7)
Nickel-65................................ 28 100 (3.7)
Nickel-66................................ 28 10 (.37)
Niobium-88............................... 41 100 (3.7)
Niobium-89 (122 min)..................... 41 100 (3.7)
Niobium-89 (66 min)...................... 41 100 (3.7)
Niobium-90............................... 41 10 (.37)
Niobium-93m.............................. 41 100 (3.7)
Niobium-94............................... 41 10 (.37)
Niobium-95............................... 41 10 (.37)
Niobium-95m.............................. 41 100 (3.7)
Niobium-96............................... 41 10 (.37)
Niobium-97............................... 41 100 (3.7)
Niobium-98............................... 41 1000 (37)
Osmium-180............................... 76 1000 (37)
Osmium-181............................... 76 100 (3.7)
Osmium-182............................... 76 100 (3.7)
Osmium-185............................... 76 10 (.37)
Osmium-189m.............................. 76 1000 (37)
Osmium-191............................... 76 100 (3.7)
Osmium-191m.............................. 76 1000 (37)
Osmium-193............................... 76 100 (3.7)
Osmium-194............................... 76 1 (.037)
Palladium-100............................ 46 100 (3.7)
Palladium-101............................ 46 100 (3.7)
Palladium-103............................ 46 100 (3.7)
Palladium-107............................ 46 100 (3.7)
Palladium-109............................ 46 1000 (37)
Phosphorus-32............................ 15 0.1 (.0037)
Phosphorus-33............................ 15 1 (.037)
Platinum-186............................. 78 100 (3.7)
Platinum-188............................. 78 100 (3.7)
Platinum-189............................. 78 100 (3.7)
Platinum-191............................. 78 100 (3.7)
Platinum-193............................. 78 1000 (37)
Platinum-193m............................ 78 100 (3.7)
Platinum-195m............................ 78 100 (3.7)
Platinum-197............................. 78 1000 (37)
Platinum-197m............................ 78 1000 (37)
Platinum-199............................. 78 1000 (37)
Platinum-200............................. 78 100 (3.7)
Plutonium-234............................ 94 1000 (37)
Plutonium-235............................ 94 1000 (37)
Plutonium-236............................ 94 0.1 (.0037)
Plutonium-237............................ 94 1000 (37)
Plutonium-238............................ 94 0.01 (.00037)
Plutonium-239............................ 94 0.01 (.00037)
[[Page 321]]
Plutonium-240............................ 94 0.01 (.00037)
Plutonium-241............................ 94 1 (.037)
Plutonium-242............................ 94 0.01 (.00037)
Plutonium-243............................ 94 1000 (37)
Plutonium-244............................ 94 0.01 (.00037)
Plutonium-245............................ 94 100 (3.7)
Polonium-203............................. 84 100 (3.7)
Polonium-205............................. 84 100 (3.7)
Polonium-207............................. 84 10 (.37)
Polonium-210............................. 84 0.01 (.00037)
Potassium-40............................. 19 1 (.037)
Potassium-42............................. 19 100 (3.7)
Potassium-43............................. 19 10 (.37)
Potassium-44............................. 19 100 (3.7)
Potassium-45............................. 19 1000 (37)
Praseodymium-136......................... 59 1000 (37)
Praseodymium-137......................... 59 1000 (37)
Praseodymium-138m........................ 59 100 (3.7)
Praseodymium-139......................... 59 1000 (37)
Praseodymium-142......................... 59 100 (3.7)
Praseodymium-142m........................ 59 1000 (37)
Praseodymium-143......................... 59 10 (.37)
Praseodymium-144......................... 59 1000 (37)
Praseodymium-145......................... 59 1000 (37)
Praseodymium-147......................... 59 1000 (37)
Promethium-141........................... 61 1000 (37)
Promethium-143........................... 61 100 (3.7)
Promethium-144........................... 61 10 (.37)
Promethium-145........................... 61 100 (3.7)
Promethium-146........................... 61 10 (.37)
Promethium-147........................... 61 10 (.37)
Promethium-148........................... 61 10 (.37)
Promethium-148m.......................... 61 10 (.37)
Promethium-149........................... 61 100 (3.7)
Promethium-150........................... 61 100 (3.7)
Promethium-151........................... 61 100 (3.7)
Protactinium-227......................... 91 100 (3.7)
Protactinium-228......................... 91 10 (.37)
Protactinium-230......................... 91 10 (.37)
Protactinium-231......................... 91 0.01 (.00037)
Protactinium-232......................... 91 10 (.37)
Protactinium-233......................... 91 100 (3.7)
Protactinium-234......................... 91 10 (.37)
RADIONUCLIDES $[dagger].................. ........... 1 (.037)
Radium-223............................... 88 1 (.037)
Radium-224............................... 88 10 (.37)
Radium-225............................... 88 1 (.037)
Radium-226 **............................ 88 0.1 (.0037)
Radium-227............................... 88 1000 (37)
Radium-228............................... 88 0.1 (.0037)
Radon-220................................ 86 0.1 (.0037)
Radon-222................................ 86 0.1 (.0037)
Rhenium-177.............................. 75 1000 (37)
Rhenium-178.............................. 75 1000 (37)
Rhenium-181.............................. 75 100 (3.7)
Rhenium-182 (12.7 hr).................... 75 10 (.37)
Rhenium-182 (64.0 hr).................... 75 10 (.37)
Rhenium-184.............................. 75 10 (.37)
Rhenium-184m............................. 75 10 (.37)
Rhenium-186.............................. 75 100 (3.7)
Rhenium-186m............................. 75 10 (.37)
Rhenium-187.............................. 75 1000 (37)
Rhenium-188.............................. 75 1000 (37)
Rhenium-188m............................. 75 1000 (37)
Rhenium-189.............................. 75 1000 (37)
Rhodium-100.............................. 45 10 (.37)
Rhodium-101.............................. 45 10 (.37)
Rhodium-101m............................. 45 100 (3.7)
Rhodium-102.............................. 45 10 (.37)
Rhodium-102m............................. 45 10 (.37)
Rhodium-103m............................. 45 1000 (37)
Rhodium-105.............................. 45 100 (3.7)
Rhodium-106m............................. 45 10 (.37)
Rhodium-107.............................. 45 1000 (37)
Rhodium-99............................... 45 10 (.37)
Rhodium-99m.............................. 45 100 (3.7)
Rubidium-79.............................. 37 1000 (37)
Rubidium-81.............................. 37 100 (3.7)
Rubidium-81m............................. 37 1000 (37)
Rubidium-82m............................. 37 10 (.37)
Rubidium-83.............................. 37 10 (.37)
Rubidium-84.............................. 37 10 (.37)
Rubidium-86.............................. 37 10 (.37)
Rubidium-87.............................. 37 10 (.37)
Rubidium-88.............................. 37 1000 (37)
Rubidium-89.............................. 37 1000 (37)
Ruthenium-103............................ 44 10 (.37)
Ruthenium-105............................ 44 100 (3.7)
Ruthenium-106............................ 44 1 (.037)
Ruthenium-94............................. 44 1000 (37)
Ruthenium-97............................. 44 100 (3.7)
Samarium-141............................. 62 1000 (37)
Samarium-141m............................ 62 1000 (37)
Samarium-142............................. 62 1000 (37)
Samarium-145............................. 62 100 (3.7)
Samarium-146............................. 62 0.01 (.00037)
Samarium-147............................. 62 0.01 (.00037)
Samarium-151............................. 62 10 (.37)
Samarium-153............................. 62 100 (3.7)
Samarium-155............................. 62 1000 (37)
Samarium-156............................. 62 100 (3.7)
Scandium-43.............................. 21 1000 (37)
Scandium-44.............................. 21 100 (3.7)
Scandium-44m............................. 21 10 (.37)
Scandium-46.............................. 21 10 (.37)
Scandium-47.............................. 21 100 (3.7)
Scandium-48.............................. 21 10 (.37)
Scandium-49.............................. 21 1000 (37)
Selenium-70.............................. 34 1000 (37)
Selenium-73.............................. 34 10 (.37)
Selenium-73m............................. 34 100 (3.7)
Selenium-75.............................. 34 10 (.37)
Selenium-79.............................. 34 10 (.37)
Selenium-81.............................. 34 1000 (37)
Selenium-81m............................. 34 1000 (37)
Selenium-83.............................. 34 1000 (37)
Silicon-31............................... 14 1000 (37)
Silicon-32............................... 14 1 (.037)
Silver-102............................... 47 100 (3.7)
Silver-103............................... 47 1000 (37)
Silver-104............................... 47 1000 (37)
Silver-104m.............................. 47 1000 (37)
Silver-105............................... 47 10 (.37)
Silver-106............................... 47 1000 (37)
Silver-106m.............................. 47 10 (.37)
Silver-108m.............................. 47 10 (.37)
Silver-110m.............................. 47 10 (.37)
Silver-111............................... 47 10 (.37)
Silver-112............................... 47 100 (3.7)
Silver-115............................... 47 1000 (37)
Sodium-22................................ 11 10 (.37)
Sodium-24................................ 11 10 (.37)
Strontium-80............................. 38 100 (3.7)
Strontium-81............................. 38 1000 (37)
Strontium-83............................. 38 100 (3.7)
Strontium-85............................. 38 10 (.37)
[[Page 322]]
Strontium-85m............................ 38 1000 (37)
Strontium-87m............................ 38 100 (3.7)
Strontium-89............................. 38 10 (.37)
Strontium-90............................. 38 0.1 (.0037)
Strontium-91............................. 38 10 (.37)
Strontium-92............................. 38 100 (3.7)
Sulfur-35................................ 16 1 (.037)
Tantalum-172............................. 73 100 (3.7)
Tantalum-173............................. 73 100 (3.7)
Tantalum-174............................. 73 100 (3.7)
Tantalum-175............................. 73 100 (3.7)
Tantalum-176............................. 73 10 (.37)
Tantalum-177............................. 73 1000 (37)
Tantalum-178............................. 73 1000 (37)
Tantalum-179............................. 73 1000 (37)
Tantalum-180............................. 73 100 (3.7)
Tantalum-180m............................ 73 1000 (37)
Tantalum-182............................. 73 10 (.37)
Tantalum-182m............................ 73 1000 (37)
Tantalum-183............................. 73 100 (3.7)
Tantalum-184............................. 73 10 (.37)
Tantalum-185............................. 73 1000 (37)
Tantalum-186............................. 73 1000 (37)
Technetium-101........................... 43 1000 (37)
Technetium-104........................... 43 1000 (37)
Technetium-93............................ 43 100 (3.7)
Technetium-93m........................... 43 1000 (37)
Technetium-94............................ 43 10 (.37)
Technetium-94m........................... 43 100 (3.7)
Technetium-96............................ 43 10 (.37)
Technetium-96m........................... 43 1000 (37)
Technetium-97............................ 43 100 (3.7)
Technetium-97m........................... 43 100 (3.7)
Technetium-98............................ 43 10 (.37)
Technetium-99............................ 43 10 (.37)
Technetium-99m........................... 43 100 (3.7)
Tellurium-116............................ 52 1000 (37)
Tellurium-121............................ 52 10 (.37)
Tellurium-121m........................... 52 10 (.37)
Tellurium-123............................ 52 10 (.37)
Tellurium-123m........................... 52 10 (.37)
Tellurium-125m........................... 52 10 (.37)
Tellurium-127............................ 52 1000 (37)
Tellurium-127m........................... 52 10 (.37)
Tellurium-129............................ 52 1000 (37)
Tellurium-129m........................... 52 10 (.37)
Tellurium-131............................ 52 1000 (37)
Tellurium-131m........................... 52 10 (.37)
Tellurium-132............................ 52 10 (.37)
Tellurium-133............................ 52 1000 (37)
Tellurium-133m........................... 52 1000 (37)
Tellurium-134............................ 52 1000 (37)
Terbium-147.............................. 65 100 (3.7)
Terbium-149.............................. 65 100 (3.7)
Terbium-150.............................. 65 100 (3.7)
Terbium-151.............................. 65 10 (.37)
Terbium-153.............................. 65 100 (3.7)
Terbium-154.............................. 65 10 (.37)
Terbium-155.............................. 65 100 (3.7)
Terbium-156.............................. 65 10 (.37)
Terbium-156m (24.4 hr)................... 65 1000 (37)
Terbium-156m (5.0 hr).................... 65 1000 (37)
Terbium-157.............................. 65 100 (3.7)
Terbium-158.............................. 65 10 (.37)
Terbium-160.............................. 65 10 (.37)
Terbium-161.............................. 65 100 (3.7)
Thallium-194............................. 81 1000 (37)
Thallium-194m............................ 81 100 (3.7)
Thallium-195............................. 81 100 (3.7)
Thallium-197............................. 81 100 (3.7)
Thallium-198............................. 81 10 (.37)
Thallium-198m............................ 81 100 (3.7)
Thallium-199............................. 81 100 (3.7)
Thallium-200............................. 81 10 (.37)
Thallium-201............................. 81 1000 (37)
Thallium-202............................. 81 10 (.37)
Thallium-204............................. 81 10 (.37)
Thorium (Irradiated)..................... 90 ***
Thorium (Natural)........................ 90 **
Thorium-226.............................. 90 100 (3.7)
Thorium-227.............................. 90 1 (.037)
Thorium-228.............................. 90 0.01 (.00037)
Thorium-229.............................. 90 0.001 (.000037)
Thorium-230.............................. 90 0.01 (.00037)
Thorium-231.............................. 90 100 (3.7)
Thorium-232 **........................... 90 0.001 (.000037)
Thorium-234.............................. 90 100 (3.7)
Thulium-162.............................. 69 1000 (37)
Thulium-166.............................. 69 10 (.37)
Thulium-167.............................. 69 100 (3.7)
Thulium-170.............................. 69 10 (.37)
Thulium-171.............................. 69 100 (3.7)
Thulium-172.............................. 69 100 (3.7)
Thulium-173.............................. 69 100 (3.7)
Thulium-175.............................. 69 1000 (37)
Tin-110.................................. 50 100 (3.7)
Tin-111.................................. 50 1000 (37)
Tin-113.................................. 50 10 (.37)
Tin-117m................................. 50 100 (3.7)
Tin-119m................................. 50 10 (.37)
Tin-121.................................. 50 1000 (37)
Tin-121m................................. 50 10 (.37)
Tin-123.................................. 50 10 (.37)
Tin-123m................................. 50 1000 (37)
Tin-125.................................. 50 10 (.37)
Tin-126.................................. 50 1 (.037)
Tin-127.................................. 50 100 (3.7)
Tin-128.................................. 50 1000 (37)
Titanium-44.............................. 22 1 (.037)
Titanium-45.............................. 22 1000 (37)
Tungsten-176............................. 74 1000 (37)
Tungsten-177............................. 74 100 (3.7)
Tungsten-178............................. 74 100 (3.7)
Tungsten-179............................. 74 1000 (37)
Tungsten-181............................. 74 100 (3.7)
Tungsten-185............................. 74 10 (.37)
Tungsten-187............................. 74 100 (3.7)
Tungsten-188............................. 74 10 (.37)
Uranium (Depleted)....................... 92 ***
Uranium (Irradiated)..................... 92 ***
Uranium (Natural)........................ 92 **
Uranium Enriched 20% or greater.......... 92 ***
Uranium Enriched less than 20%........... 92 ***
Uranium-230.............................. 92 1 (.037)
Uranium-231.............................. 92 1000 (37)
Uranium-232.............................. 92 0.01 (.00037)
Uranium-233.............................. 92 0.1 (.0037)
Uranium-234 **........................... 92 0.1 (.0037)
Uranium-235 **........................... 92 0.1 (.0037)
Uranium-236.............................. 92 0.1 (.0037)
Uranium-237.............................. 92 100 (3.7)
Uranium-238 **........................... 92 0.1 (.0037)
Uranium-239.............................. 92 1000 (37)
Uranium-240.............................. 92 1000 (37)
[[Page 323]]
Vanadium-47.............................. 23 1000 (37)
Vanadium-48.............................. 23 10 (.37)
Vanadium-49.............................. 23 1000 (37)
Xenon-120................................ 54 100 (3.7)
Xenon-121................................ 54 10 (.37)
Xenon-122................................ 54 100 (3.7)
Xenon-123................................ 54 10 (.37)
Xenon-125................................ 54 100 (3.7)
Xenon-127................................ 54 100 (3.7)
Xenon-129m............................... 54 1000 (37)
Xenon-131m............................... 54 1000 (37)
Xenon-133................................ 54 1000 (37)
Xenon-133m............................... 54 1000 (37)
Xenon-135................................ 54 100 (3.7)
Xenon-135m............................... 54 10 (.37)
Xenon-138................................ 54 10 (.37)
Ytterbium-162............................ 70 1000 (37)
Ytterbium-166............................ 70 10 (.37)
Ytterbium-167............................ 70 1000 (37)
Ytterbium-169............................ 70 10 (.37)
Ytterbium-175............................ 70 100 (3.7)
Ytterbium-177............................ 70 1000 (37)
Ytterbium-178............................ 70 1000 (37)
Yttrium-86............................... 39 10 (.37)
Yttrium-86m.............................. 39 1000 (37)
Yttrium-87............................... 39 10 (.37)
Yttrium-88............................... 39 10 (.37)
Yttrium-90............................... 39 10 (.37)
Yttrium-90m.............................. 39 100 (3.7)
Yttrium-91............................... 39 10 (.37)
Yttrium-91m.............................. 39 1000 (37)
Yttrium-92............................... 39 100 (3.7)
Yttrium-93............................... 39 100 (3.7)
Yttrium-94............................... 39 1000 (37)
Yttrium-95............................... 39 1000 (37)
Zinc-62.................................. 30 100 (3.7)
Zinc-63.................................. 30 1000 (37)
Zinc-65.................................. 30 10 (.37)
Zinc-69.................................. 30 1000 (37)
Zinc-69m................................. 30 100 (3.7)
Zinc-71m................................. 30 100 (3.7)
Zinc-72.................................. 30 100 (3.7)
Zirconium-86............................. 40 100 (3.7)
Zirconium-88............................. 40 10 (.37)
Zirconium-89............................. 40 100 (3.7)
Zirconium-93............................. 40 1 (.037)
Zirconium-95............................. 40 10 (.37)
Zirconium-97............................. 40 10 (.37)
------------------------------------------------------------------------
$ The RQs for all radionuclides apply to chemical compounds containing
the radionuclides and elemental forms regardless of the diameter of
pieces of solid material.
[dagger] The RQ of one curie applies to all radionuclides not otherwise
listed. Whenever the RQs in TABLE 1--HAZARDOUS SUBSTANCES OTHER THAN
RADIONUCLIDES and this table conflict, the lowest RQ shall apply. For
example, uranyl acetate and uranyl nitrate have RQs shown in TABLE 1
of 100 pounds, equivalent to about one-tenth the RQ level for uranium-
238 in this table.
** The method to determine the RQs for mixtures or solutions of
radionuclides can be found in paragraph 7 of the note preceding TABLE
1 of this appendix. RQs for the following four common radionuclide
mixtures are provided: radium-226 in secular equilibrium with its
daughters (0.053 curie); natural uranium (0.1 curie); natural uranium
in secular equilibrium with its daughters (0.052 curie); and natural
thorium in secular equilibrium with its daughters (0.011 curie).
*** Indicates that the name was added by PHMSA because it appears in the
list of radionuclides in 49 CFR 173.435. The reportable quantity (RQ),
if not specifically listed elsewhere in this appendix, shall be
determined in accordance with the procedures in paragraph 7 of this
appendix.
[Amdt. 172-122, 55 FR 46798, Nov. 7, 1990]
Editorial Note: For Federal Register citations affecting appendix A
to Sec. 172.101, see the List of CFR Sections Affected which appears in
the Finding Aids section of the printed volume and on GPO Access.
Appendix B to Sec. 172.101--List of Marine Pollutants
1. See Sec. 171.4 of this subchapter for applicability to marine
pollutants. This appendix lists potential marine pollutants as defined
in Sec. 171.8 of this subchapter.
2. Marine pollutants listed in this appendix are not necessarily
listed by name in the Sec. 172.101 Table. If a marine pollutant not
listed by name or by synonym in the Sec. 172.101 Table meets the
definition of any hazard Class 1 through 8, then you must determine the
class and division of the material in accordance with Sec. 173.2a of
this subchapter. You must also select the most appropriate hazardous
material description and proper shipping name. If a marine pollutant not
listed by name or by synonym in the Sec. 172.101 Table does not meet
the definition of any Class 1 through 8, then you must offer it for
transportation under the most appropriate of the following two Class 9
entries: ``Environmentally hazardous substances, liquid, n.o.s.,''
UN3082, or ``Environmentally hazardous substances, solid, n.o.s.''
UN3077.
3. This appendix contains two columns. The first column, entitled
``S.M.P.'' (for severe marine pollutants), identifies whether a material
is a severe marine pollutant. If the letters ``PP'' appear in this
column for a material, the material is a severe marine pollutant,
otherwise it is not. The second column, entitled ``Marine Pollutant'' ,
lists the marine pollutants.
4. If a material is not listed in this appendix and meets the
criteria for a marine pollutant as provided in Chapter 2.10 of the IMDG
Code, ``Guidelines for the Identification of Harmful Substances in
Packaged Form'' (incorporated by reference; see Sec. 171.7 of this
subchapter), the material may be transported as a marine pollutant in
accordance with the applicable requirements of this subchapter.
5. If a material listed in this appendix does not meet the criteria
for a marine pollutant as provided in Chapter 2.10 of the IMDG Code,
``Guidelines for the Identification of Harmful Substances in Packaged
Form'' (incorporated by reference; see Sec. 171.7 of this subchapter),
it may be excepted from the requirements of this subchapter as a marine
pollutant if that exception is approved by the Associate Administrator.
[[Page 324]]
List of Marine Pollutants
------------------------------------------------------------------------
S.M.P. (1) Marine pollutant (2)
------------------------------------------------------------------------
Acetone cyanohydrin, stabilized
Acetylene tetrabromide
Acetylene tetrachloride
Acraldehyde, inhibited
Acrolein, inhibited
Acrolein, stabilized
Acrylic aldehyde, inhibited
Alcohol C-12 - C-16 poly(1-6)
ethoxylate
Alcohol C-13 - C-15 poly(1-6)
ethoxylate
Alcohol C-6 - C-17 (secondary)poly(3-6)
ethoxylate
Aldicarb
PP Aldrin
Alkyl (c12-c14) dimethylamine
Alkyl (c7-c9) nitrates
Alkybenzenesulphonates, branched and
straight chain (excluding C11-C13
straight chain or branched chain
homologues)
Allyl bromide
ortho-Aminoanisole
Aminocarb
Ammonium dinitro-o-cresolate
n-Amylbenzene
PP Azinphos-ethyl
PP Azinphos-methyl
Barium cyanide
Bendiocarb
Benomyl
Benquinox
Benzyl chlorocarbonate
Benzyl chloroformate
PP Binapacryl
N,N-Bis (2-hydroxyethyl) oleamide (LOA)
PP Brodifacoum
Bromine cyanide
Bromoacetone
Bromoallylene
Bromobenzene
ortho-Bromobenzyl cyanide
Bromocyane
Bromoform
PP Bromophos-ethyl
3-Bromopropene
Bromoxynil
Butanedione
2-Butenal, stabilized
Butyl benzyl phthalate
N-tert-butyl-N-cyclopropyl-6-methylthio-
1,3,5-triazine-2,4-diamine
2,4-Di-tert-butylphenol
PP 2, 6-Di-tert-Butylphenol
para-tertiary-butyltoluene
PP Cadmium compounds
Cadmium sulphide
Calcium arsenate
Calcium arsenate and calcium arsenite,
mixtures, solid
Calcium cyanide
PP Camphechlor
Carbaryl
Carbendazim
Carbofuran
Carbon tetrabromide
Carbon tetrachloride
PP Carbophenothion
Cartap hydrochloride
PP Chlordane
Chlorfenvinphos
PP Chlorinated paraffins (C-10 - C-13)
PP Chlorinated paraffins (C14-C17), with
more than 1% shorter chain length
Chlorine
Chlorine cyanide, inhibited
Chlormephos
Chloroacetone, stabilized
1-Chloro-2,3-Epoxypropane
2-Chloro-6-nitrotoluene
4-Chloro-2-nitrotoluene
Chloro-ortho-nitrotoluene
2-Chloro-5-trifluoromethylnitrobenzene
para-Chlorobenzyl chloride, liquid or
solid
Chlorodinitrobenzenes, liquid or solid
1-Chloroheptane
1-Chlorohexane
Chloronitroanilines
Chloronitrotoluenes, liquid
Chloronitrotoluenes, solid
1-Chlorooctane
PP Chlorophenolates, liquid
PP Chlorophenolates, solid
Chlorophenyltrichlorosilane
Chloropicrin
alpha-Chloropropylene
Chlorotoluenes (meta-;para-)
PP Chlorpyriphos
PP Chlorthiophos
Cocculus
Coconitrile
Copper acetoarsenite
Copper arsenite
Copper chloride
PP Copper chloride solution
PP Copper cyanide
PP Copper metal powder
PP Copper sulphate, anhydrous, hydrates
Coumachlor
PP Coumaphos
PP Cresyl diphenyl phosphate
Crotonaldehyde, stabilized
Crotonic aldehyde, stabilized
Crotoxyphos
Cupric arsenite
PP Cupric chloride
PP Cupric cyanide
PP Cupric sulfate
Cupriethylenediamine solution
PP Cuprous chloride
Cyanide mixtures
Cyanide solutions
Cyanides, inorganic, n.o.s.
Cyanogen bromide
Cyanogen chloride, inhibited
Cyanogen chloride, stabilized
Cyanophos
PP 1,5,9-Cyclododecatriene
PP Cyhexatin
PP Cymenes (o-;m-;p-)
PP Cypermethrin
Decyl acrylate
PP DDT
Decycloxytetrahydrothiophene dioxide
DEF
Desmedipham
Di-allate
Di-n-Butyl phthalate
PP Dialifos
4,4'-Diaminodiphenylmethane
PP Diazinon
1,3-Dibromobenzene
PP Dichlofenthion
Dichloroanilines
1,3-Dichlorobenzene
1,2-Dichlorobenzene
[[Page 325]]
1,4-Dichlorobenzene
Dichlorobenzene (meta-; para-)
2,2-Dichlorodiethyl ether
Dichlorodimethyl ether, symmetrical
Di-(2-chloroethyl) ether
1,1-Dichloroethylene, inhibited
1,6-Dichlorohexane
Dichlorophenyltrichlorosilane
PP Dichlorvos
PP Diclofop-methyl
Dicrotophos
PP Dieldrin
Diisopropylbenzenes
Diisopropylnaphthalenes, mixed isomers
PP Dimethoate
PP N,N-Dimethyldodecylamine
Dimethylhydrazine, symmetrical
Dimethylhydrazine, unsymmetrical
Dinitro-o-cresol, solid
Dinitro-o-cresol, solution
Dinitrochlorobenzenes, liquid or solid
Dinitrophenol, dry or wetted with less
than 15 per cent water, by mass
Dinitrophenol solutions
Dinitrophenol, wetted with not less
than 15 per cent water, by mass
Dinitrophenolates alkali metals, dry or
wetted with less than 15 per cent
water, by mass
Dinitrophenolates, wetted with not less
than 15 per cent water, by mass
Dinobuton
Dinoseb
Dinoseb acetate
Dioxacarb
Dioxathion
Dipentene
Diphacinone
Diphenyl
PP Diphenylamine chloroarsine
PP Diphenylchloroarsine, solid or liquid
Disulfoton
1,4-Di-tert-butylbenzene
DNOC
DNOC (pesticide)
Dodecyl diphenyl oxide disulphonate
PP Dodecyl hydroxypropyl sulfide
1-Dodecylamine
PP Dodecylphenol
Drazoxolon
Edifenphos
PP Endosulfan
PP Endrin
Epibromohydrin
Epichlorohydrin
PP EPN
PP Esfenvalerate
PP Ethion
Ethoprophos
Ethyl fluid
Ethyl mercaptan
2-Ethylhexyl nitrate
5-Ethyl-2-picoline
Ethyl propenoate, inhibited
2-Ethyl-3-propylacrolein
Ethyl tetraphosphate
Ethyldichloroarsine
Ethylene dibromide and methyl bromide
mixtures, liquid
2-Ethylhexaldehyde
Fenamiphos
PP Fenbutatin oxide
PP Fenchlorazole-ethyl
PP Fenitrothion
PP Fenoxapro-ethyl
PP Fenoxaprop-P-ethyl
PP Fenpropathrin
Fensulfothion
PP Fenthion
PP Fentin acetate
PP Fentin hydroxide
Ferric arsenate
Ferric arsenite
Ferrous arsenate
PP Fonofos
Formetanate
PP Furathiocarb (ISO)
PP gamma-BHC
Gasoline, leaded
PP Heptachlor
Heptenophos
n-Heptaldehyde
n-Heptylbenzene
normal-Heptyl chloride
PP Hexachlorobutadiene
PP 1,3-Hexachlorobutadiene
Hexaethyl tetraphosphate liquid
Hexaethyl tetraphosphate, solid
normal-Hexyl chloride
n-Hexylbenzene
Hydrocyanic acid, anhydrous,
stabilized, containing less than 3%
water
Hydrocyanic acid, anhydrous,
stabilized, containing less than 3%
water and absorbed in a porous inert
material
Hydrocyanic acid, aqueous solutions not
more than 20% hydrocyanic acid
Hydrogen cyanide solution in alcohol,
with not more than 45% hydrogen
cyanide
Hydrogen cyanide, stabilized with less
than 3% water
Hydrogen cyanide, stabilized with less
than 3% water and absorbed in a porous
inert material
Hydroxydimethylbenzenes, liquid or
solid
Ioxynil
Isobenzan
Isobutyl butyrate
Isobutylbenzene
Isodecyl acrylate
Isodecyl diphenyl phosphate
Isofenphos
Isooctyl nitrate
Isoprocarb
Isopropenylbenzene
Isotetramethylbenzene
PP Isoxathion
Lead acetate
Lead arsenates
Lead arsenites
Lead compounds, soluble, n.o.s.
Lead cyanide
Lead nitrate
Lead perchlorate, solid or solution
Lead tetraethyl
Lead tetramethyl
PP Lindane
Linuron
London Purple
Magnesium arsenate
Malathion
Mancozeb (ISO)
Maneb
Maneb preparations with not less than
60% maneb
[[Page 326]]
Maneb preparation, stabilized against
self-heating
Maneb stabilized or Maneb preparations,
stabilized against self-heating
Manganese ethylene-1,2-bis
dithiocarbamate
Manganese ethylene-1,2-bis-
dithiocarbamate, stabilized against
self-heating
Mecarbam
Mephosfolan
Mercaptodimethur
PP Mercuric acetate
PP Mercuric ammonium chloride
PP Mercuric arsenate
PP Mercuric benzoate
PP Mercuric bisulphate
PP Mercuric bromide
PP Mercuric chloride
PP Mercuric cyanide
PP Mercuric gluconate
Mercuric iodide
PP Mercuric nitrate
PP Mercuric oleate
PP Mercuric oxide
PP Mercuric oxycyanide, desensitized
PP Mercuric potassium cyanide
PP Mercuric Sulphate
PP Mercuric thiocyanate
PP Mercurol
PP Mercurous acetate
PP Mercurous bisulphate
PP Mercurous bromide
PP Mercurous chloride
PP Mercurous nitrate
PP Mercurous salicylate
PP Mercurous sulphate
PP Mercury acetates
PP Mercury ammonium chloride
PP Mercury based pesticide, liquid,
flammable, toxic
PP Mercury based pesticides, liquid,
toxic, flammable
PP Mercury based pesticides, liquid, toxic
PP Mercury based pesticides, solid, toxic
PP Mercury benzoate
PP Mercury bichloride
PP Mercury bisulphates
PP Mercury bromides
PP Mercury compounds, liquid, n.o.s.
PP Mercury compounds, solid, n.o.s.
PP Mercury cyanide
PP Mercury gluconate
PP Mercury (I) (mercurous) compounds
(pesticides)
PP Mercury (II) (mercuric) compounds
(pesticides)
Mercury iodide
PP Mercury nucleate
PP Mercury oleate
PP Mercury oxide
PP Mercury oxycyanide, desensitized
PP Mercury potassium cyanide
PP Mercury potassium iodide
PP Mercury salicylate
PP Mercury sulfates
PP Mercury thiocyanate
Metam-sodium
Methamidophos
Methanethiol
Methidathion
Methomyl
ortho-Methoxyaniline
Methyl bromide and ethylene dibromide
mixtures, liquid
Methyl mercaptan
3-Methylacroleine, stabilized
Methylchlorobenzenes
Methylnitrophenols
3-Methylpyradine
Methyltrithion
Methylvinylbenzenes, inhibited
PP Mevinphos
Mexacarbate
Mirex
Monocrotophos
Motor fuel anti-knock mixtures
Motor fuel anti-knock mixtures or
compounds
Nabam
Naled
PP Nickel carbonyl
PP Nickel cyanide
PP Nickel tetracarbonyl
3-Nitro-4-chlorobenzotrifluoride
Nitrobenzene
Nitrobenzotrifluorides, liquid or solid
Nonylphenol
normal-Octaldehyde
Oleylamine
PP Organotin compounds, liquid, n.o.s.
PP Organotin compounds (pesticides)
PP Organotin compounds, solid, n.o.s.
PP Organotin pesticides, liquid,
flammable, toxic, n.o.s., flash point
less than 23deg C
PP Organotin pesticides, liquid, toxic,
flammable, n.o.s.
PP Organotin pesticides, liquid, toxic,
n.o.s.
PP Organotin pesticides, solid, toxic,
n.o.s.
Orthoarsenic acid
PP Osmium tetroxide
Oxamyl
Oxydisulfoton
Paraoxon
PP Parathion
PP Parathion-methyl
PP PCBs.
Pentachloroethane
PP Pentachlorophenol
Pentalin
n-Pentylbenzene
Perchloroethylene
Perchloromethylmercaptan
Petrol, leaded
PP Phenarsazine chloride
d-Phenothrin
PP Phenthoate
1-Phenylbutane
2-Phenylbutane
Phenylcyclohexane
PP Phenylmercuric acetate
PP Phenylmercuric compounds, n.o.s.
PP Phenylmercuric hydroxide
PP Phenylmercuric nitrate
2-Phenylpropene
PP Phorate
PP Phosalone
Phosmet
PP Phosphamidon
PP Phosphorus, white, molten
PP Phosphorus, white or yellow dry or
under water or in solution
PP Phosphorus white, or yellow, molten
PP Phosphorus, yellow, molten
Pindone (and salts of)
Pirimicarb
PP Pirimiphos-ethyl
PP Polychlorinated biphenyls
PP Polyhalogenated biphenyls, liquid or
Terphenyls liquid
PP Polyhalogenated biphenyls, solid or
Terphenyls, solid
[[Page 327]]
PP Potassium cuprocyanide
Potassium cyanide, solid
Potassium cyanide, solution
PP Potassium cyanocuprate (I)
PP Potassium cyanomercurate
PP Potassium mercuric iodide
Promecarb
Propachlor
Propaphos
Propenal, inhibited
Propoxur
Prothoate
Prussic acid, anhydrous, stabilized
Prussic acid, anhydrous, stabilized,
absorbed in a porous inert material
PP Pyrazophos
Quinalphos
PP Quizalofop
PP Quizalofop-p-ethyl
Rotenone
Salithion
PP Silafluofen
Silver arsenite
Silver cyanide
Silver orthoarsenite
PP Sodium copper cyanide, solid
PP Sodium copper cyanide solution
PP Sodium cuprocyanide, solid
PP Sodium cuprocyanide, solution
Sodium cyanide, solid
Sodium cyanide, solution
Sodium dinitro-o-cresolate, dry or
wetted with less than 15 per cent
water, by mass
Sodium dinitro-ortho-cresolate, wetted
with not less than 15 per cent water,
by mass
PP Sodium pentachlorophenate
Strychnine or Strychnine salts
Sulfotep
PP Sulprophos
Tallow nitrile
Temephos
TEPP
PP Terbufos
Tetrabromoethane
Tetrabromomethane
1,1,2,2-Tetrachloroethane
Tetrachloroethylene
Tetrachloromethane
Tetraethyl dithiopyrophosphate
PP Tetraethyl lead, liquid
Tetramethrin
Tetramethyllead
Thallium chlorate
Thallium compounds, n.o.s.
Thallium compounds (pesticides)
Thallium nitrate
Thallium sulfate
Thallous chlorate
Thiocarbonyl tetrachloride
Triaryl phosphates, isopropylated
PP Triaryl phosphates, n.o.s.
Triazophos
Tribromomethane
PP Tributyltin compounds
Trichlorfon
PP 1,2,3--Trichlorobenzene
Trichlorobenzenes, liquid
Trichlorobutene
Trichlorobutylene
Trichloromethane sulphuryl chloride
Trichloromethyl sulphochloride
Trichloronat
Tricresyl phosphate (less than 1% ortho-
isomer)
PP Tricresyl phosphate, not less than 1%
ortho-isomer but not more than 3%
orthoisomer
PP Tricresyl phosphate with more than 3
per cent ortho isomer
Triethylbenzene
Triisopropylated phenyl phosphates
Trimethylene dichloride
PP Triphenylphosphate
Triphenyl phosphate/tert-butylated
triphenyl phosphates mixtures
containing 5% to 10% triphenyl
phosphates
PP Triphenyl phosphate/tert-butylated
triphenyl phosphates mixtures
containing 10% to 48% triphenyl
phosphates
PP Triphenyltin compounds
Tritolyl phosphate (less than 1% ortho-
isomer)
PP Tritolyl phosphate (not less than 1%
ortho-isomer)
Trixylenyl phosphate
Vinylidene chloride, stabilized
Warfarin (and salts of)
PP White phosphorus, dry
PP White phosphorus, wet
White spirit, low (15-20%) aromatic
PP Yellow phosphorus, dry
PP Yellow phosphorus, wet
Zinc bromide
Zinc cyanide
------------------------------------------------------------------------
[Amdt. 172-127, 57 FR 52935, Nov. 5, 1992]
Editorial Note: For Federal Register citations affecting appendix B
to Sec. 172.101, see the List of CFR Sections Affected which appears in
the Finding Aids section of the printed volume and on GPO Access.
Editorial Note: At 70 FR 34388, June 14, 2005, Sec. 172.101 was
amended; however, two amendments could not be incorporated due to
inaccurate amendatory instruction.
Sec. 172.102 Special provisions.
(a) General. When column 7 of the Sec. 172.101 table refers to a
special provision for a hazardous material, the meaning and requirements
of that provision are as set forth in this section. When a special
provision specifies packaging or packaging requirements--
(1) The special provision is in addition to the standard
requirements for all packagings prescribed in Sec. 173.24 of this
subchapter and any other applicable packaging requirements in subparts A
and B of part 173 of this subchapter; and
(2) To the extent a special provision imposes limitations or
additional requirements on the packaging provisions set forth in column
8 of the
[[Page 328]]
Sec. 172.101 table, packagings must conform to the requirements of the
special provision.
(b) Description of codes for special provisions. Special provisions
contain packaging provisions, prohibitions, exceptions from requirements
for particular quantities or forms of materials and requirements or
prohibitions applicable to specific modes of transportation, as follows:
(1) A code consisting only of numbers (for example, ``11'') is
multi-modal in application and may apply to bulk and non-bulk
packagings.
(2) A code containing the letter ``A'' refers to a special provision
which applies only to transportation by aircraft.
(3) A code containing the letter ``B'' refers to a special provision
that applies only to bulk packaging requirements. Unless otherwise
provided in this subchapter, these special provisions do not apply to
UN, IM Specification portable tanks or IBCs.
(4) A code containing the letters ``IB'' or ``IP'' refers to a
special provision that applies only to transportation in IBCs.
(5) A code containing the letter ``N'' refers to a special provision
which applies only to non-bulk packaging requirements.
(6) A code containing the letter ``R'' refers to a special provision
which applies only to transportation by rail.
(7) A code containing the letter ``T'' refers to a special provision
which applies only to transportation in UN or IM Specification portable
tanks.
(8) A code containing the letters ``TP'' refers to a portable tank
special provision for UN or IM Specification portable tanks that is in
addition to those provided by the portable tank instructions or the
requirements in part 178 of this subchapter.
(9) A code containing the letter ``W'' refers to a special provision
that applies only to transportation by water.
(c) Tables of special provisions. The following tables list, and set
forth the requirements of, the special provisions referred to in column
7 of the Sec. 172.101 table.
(1) Numeric provisions. These provisions are multi-modal and apply
to bulk and non-bulk packagings:
Code/Special Provisions
1 This material is poisonous by inhalation (see Sec. 171.8 of this
subchapter) in Hazard Zone A (see Sec. 173.116(a) or Sec. 173.133(a)
of this subchapter), and must be described as an inhalation hazard under
the provisions of this subchapter.
2 This material is poisonous by inhalation (see Sec. 171.8 of this
subchapter) in Hazard Zone B (see Sec. 173.116(a) or Sec. 173.133(a)
of this subchapter), and must be described as an inhalation hazard under
the provisions of this subchapter.
3 This material is poisonous by inhalation (see Sec. 171.8 of this
subchapter) in Hazard Zone C (see Sec. 173.116(a) of this subchapter),
and must be described as an inhalation hazard under the provisions of
this subchapter.
4 This material is poisonous by inhalation (see Sec. 171.8 of this
subchapter) in Hazard Zone D (see Sec. 173.116(a) of this subchapter),
and must be described as an inhalation hazard under the provisions of
this subchapter.
5 If this material meets the definition for a material poisonous by
inhalation (see Sec. 171.8 of this subchapter), a shipping name must be
selected which identifies the inhalation hazard, in Division 2.3 or
Division 6.1, as appropriate.
6 This material is poisonous-by-inhalation and must be described as an
inhalation hazard under the provisions of this subchapter.
8 A hazardous substance that is not a hazardous waste may be shipped
under the shipping description ``Other regulated substances, liquid or
solid, n.o.s.'', as appropriate. In addition, for solid materials,
special provision B54 applies.
9 Packaging for certain PCBs for disposal and storage is prescribed by
EPA in 40 CFR 761.60 and 761.65.
11 The hazardous material must be packaged as either a liquid or a
solid, as appropriate, depending on its physical form at 55 [deg]C (131
[deg]F) at atmospheric pressure.
12 In concentrations greater than 40 percent, this material has strong
oxidizing properties and is capable of starting fires in contact with
combustible materials. If appropriate, a package containing this
material must conform to the additional labeling requirements of Sec.
172.402 of this subchapter.
13 The words ``Inhalation Hazard'' shall be entered on each shipping
paper in association with the shipping description, shall be marked on
each non-bulk package in association with the proper shipping name and
identification number, and shall be marked on two opposing sides of each
bulk package. Size of marking on bulk package must conform to Sec.
172.302(b) of this subchapter.
[[Page 329]]
The requirements of Sec. Sec. 172.203(m) and 172.505 of this subchapter
do not apply.
14 Motor fuel antiknock mixtures are:
a. Mixtures of one or more organic lead mixtures (such as tetraethyl
lead, triethylmethyl lead, diethyldimethyl lead, ethyltrimethyl lead,
and tetramethyl lead) with one or more halogen compounds (such as
ethylene dibromide and ethylene dichloride), hydrocarbon solvents or
other equally efficient stabilizers; or
b. tetraethyl lead.
15 This entry applies to ``Chemical kits'' and ``First aid kits''
containing one or more compatible items of hazardous materials in boxes,
cases, etc. that are used for medical, analytical, diagnostic or testing
purposes. For transportation by aircraft, materials forbidden for
transportation by passenger aircraft or cargo aircraft may not be
included in the kits. Chemical kits and first aid kits are excepted from
the specification packaging requirements of this subchapter when
packaged in combination packagings. Chemical kits and first aid kits are
also excepted from the labeling and placarding requirements of this
subchapter, except when offered for transportation or transported by
air. Chemical and first aid kits may be transported in accordance with
the consumer commodity and ORM exceptions in Sec. 173.156, provided
they meet all required conditions. Kits that are carried on board
transport vehicles for first aid or operating purposes are not subject
to the requirements of this subchapter.
16 This description applies to smokeless powder and other solid
propellants that are used as powder for small arms and have been classed
as Division 1.3 and 4.1 in accordance with Sec. 173.56 of this
subchapter.
18 This description is authorized only for fire extinguishers listed in
Sec. 173.309(b) of this subchapter meeting the following conditions:
a. Each fire extinguisher may only have extinguishing contents that
are nonflammable, non-poisonous, non-corrosive and commercially free
from corroding components.
b. Each fire extinguisher must be charged with a nonflammable, non-
poisonous, dry gas that has a dew-point at or below minus 46.7 [deg]C
(minus 52 [deg]F) at 101 kPa (1 atmosphere) and is free of corroding
components, to not more than the service pressure of the cylinder.
c. A fire extinguisher may not contain more than 30% carbon dioxide
by volume or any other corrosive extinguishing agent.
d. Each fire extinguisher must be protected externally by suitable
corrosion-resisting coating.
19 For domestic transportation only, the identification number
``UN1075'' may be used in place of the identification number specified
in column (4) of the Sec. 172.101 table. The identification number used
must be consistent on package markings, shipping papers and emergency
response information.
21 This material must be stabilized by appropriate means (e.g., addition
of chemical inhibitor, purging to remove oxygen) to prevent dangerous
polymerization (see Sec. 173.21(f) of this subchapter).
22 If the hazardous material is in dispersion in organic liquid, the
organic liquid must have a flash point above 50 [deg]C (122 [deg]F).
23 This material may be transported under the provisions of Division 4.1
only if it is so packed that the percentage of diluent will not fall
below that stated in the shipping description at any time during
transport. Quantities of not more than 500 g per package with not less
than 10 percent water by mass may also be classed in Division 4.1,
provided a negative test result is obtained when tested in accordance
with test series 6(c) of the UN Manual of Tests and Criteria (IBR, see
Sec. 171.7 of this subchapter).
24 Alcoholic beverages containing more than 70 percent alcohol by volume
must be transported as materials in Packing Group II. Alcoholic
beverages containing more than 24 percent but not more than 70 percent
alcohol by volume must be transported as materials in Packing Group III.
26 This entry does not include ammonium permanganate, the transport of
which is prohibited except when approved by the Associate Administrator.
28 The dihydrated sodium salt of dichloroisocyanuric acid is not subject
to the requirements of this subchapter.
29 Lithium cells and batteries and equipment containing or packed with
lithium cells and batteries which do not comply with the provisions of
Sec. 173.185 of this subchapter may be transported only if they are
approved by the Associate Administrator.
30 Sulfur is not subject to the requirements of this subchapter if
transported in a non-bulk packaging or if formed to a specific shape
(for example, prills, granules, pellets, pastilles, or flakes). A bulk
packaging containing sulfur is not subject to the placarding
requirements of subpart F of this part, if it is marked with the
appropriate identification number as required by subpart D of this part.
Molten sulfur must be marked as required by Sec. 172.325 of this
subchapter.
31 Materials which have undergone sufficient heat treatment to render
them non-hazardous are not subject to the requirements of this
subchapter.
32 Polymeric beads and molding compounds may be made from polystyrene,
[[Page 330]]
poly(methyl methacrylate) or other polymeric material.
33 Ammonium nitrites and mixtures of an inorganic nitrite with an
ammonium salt are prohibited.
34 The commercial grade of calcium nitrate fertilizer, when consisting
mainly of a double salt (calcium nitrate and ammonium nitrate)
containing not more than 10 percent ammonium nitrate and at least 12
percent water of crystallization, is not subject to the requirements of
this subchapter.
35 Antimony sulphides and oxides which do not contain more than 0.5
percent of arsenic calculated on the total mass do not meet the
definition of Division 6.1.
36 The maximum net quantity per package is 5 L (1 gallon) or 5 kg (11
pounds).
37 Unless it can be demonstrated by testing that the sensitivity of the
substance in its frozen state is no greater than in its liquid state,
the substance must remain liquid during normal transport conditions. It
must not freeze at temperatures above -15 [deg]C (5 [deg]F).
38 If this material shows a violent effect in laboratory tests involving
heating under confinement, the labeling requirements of Special
Provision 53 apply, and the material must be packaged in accordance with
packing method OP6 in Sec. 173.225 of this subchapter. If the SADT of
the technically pure substance is higher than 75 [deg]C, the technically
pure substance and formulations derived from it are not self-reactive
materials and, if not meeting any other hazard class, are not subject to
the requirements of this subchapter.
39 This substance may be carried under provisions other than those of
Class 1 only if it is so packed that the percentage of water will not
fall below that stated at any time during transport. When phlegmatized
with water and inorganic inert material, the content of urea nitrate
must not exceed 75 percent by mass and the mixture should not be capable
of being detonated by test 1(a)(i) or test 1(a)(ii) in the UN Manual of
Tests and Criteria (IBR, see Sec. 171.7 of this subchapter).
40 Polyester resin kits consist of two components: a base material
(Class 3, Packing Group II or III) and an activator (organic peroxide),
each separately packed in an inner packaging. The organic peroxide must
be type D, E, or F, not requiring temperature control, and be limited to
a quantity of 125 mL (4.22 ounces) per inner packaging if liquid, and
500 g (1 pound) if solid. The components may be placed in the same outer
packaging provided they will not interact dangerously in the event of
leakage. Packing group will be II or III, according to the criteria for
Class 3, applied to the base material.
43 The membrane filters, including paper separators and coating or
backing materials, that are present in transport, must not be able to
propagate a detonation as tested by one of the tests described in the UN
Manual of Tests and Criteria, Part I, Test series 1(a) (IBR, see Sec.
171.7 of this subchapter). On the basis of the results of suitable
burning rate tests, and taking into account the standard tests in the UN
Manual of Tests and Criteria, Part III, subsection 33.2.1 (IBR, see
Sec. 171.7 of this subchapter), nitrocellulose membrane filters in the
form in which they are to be transported that do not meet the criteria
for a Division 4.1 material are not subject to the requirements of this
subchapter. Packagings must be so constructed that explosion is not
possible by reason of increased internal pressure. Nitrocellulose
membrane filters covered by this entry, each with a mass not exceeding
0.5 g, are not subject to the requirements of this subchapter when
contained individually in an article or a sealed packet.
44 The formulation must be prepared so that it remains homogenous and
does not separate during transport. Formulations with low nitrocellulose
contents and neither showing dangerous properties when tested for their
ability to detonate, deflagrate or explode when heated under defined
confinement by the appropriate test methods and criteria in the UN
Manual of Tests and Criteria (IBR, see Sec. 171.7 of this subchapter),
nor classed as a Division 4.1 (flammable solid) when tested in
accordance with the procedures specified in Sec. 173.124 of this
subchapter (chips, if necessary, crushed and sieved to a particle size
of less than 1.25 mm), are not subject to the requirements of this
subchapter.
45 Temperature should be maintained between 18 [deg]C (64.4 [deg]F) and
40 [deg]C (104 [deg]F). Tanks containing solidified methacrylic acid
must not be reheated during transport.
46 This material must be packed in accordance with packing method OP6
(see Sec. 173.225 of this subchapter). During transport, it must be
protected from direct sunshine and stored (or kept) in a cool and well-
ventilated place, away from all sources of heat.
47 Mixtures of solids that are not subject to this subchapter and
flammable liquids may be transported under this entry without first
applying the classification criteria of Division 4.1, provided there is
no free liquid visible at the time the material is loaded or at the time
the packaging or transport unit is closed. Except when the liquids are
fully absorbed in solid material contained in sealed bags, each
packaging must correspond to a design type that has passed a
leakproofness test at the Packing Group II level. Small inner packagings
consisting of sealed packets containing less than 10 mL of a Class 3
liquid in Packing Group II or
[[Page 331]]
III absorbed into a solid material are not subject to this subchapter
provided there is no free liquid in the packet.
48 Mixtures of solids which are not subject to this subchapter and toxic
liquids may be transported under this entry without first applying the
classification criteria of Division 6.1, provided there is no free
liquid visible at the time the material is loaded or at the time the
packaging or transport unit is closed. Each packaging must correspond to
a design type that has passed a leakproofness test at the Packing Group
II level. This entry may not be used for solids containing a Packing
Group I liquid.
49 Mixtures of solids which are not subject to this subchapter and
corrosive liquids may be transported under this entry without first
applying the classification criteria of Class 8, provided there is no
free liquid visible at the time the material is loaded or at the time
the packaging or transport unit is closed. Each packaging must
correspond to a design type that has passed a leakproofness test at the
Packing Group II level.
50 Cases, cartridge, empty with primer which are made of metallic or
plastic casings and meeting the classification criteria of Division 1.4
are not regulated for domestic transportation.
51 This description applies to items previously described as ``Toy
propellant devices, Class C'' and includes reloadable kits. Model rocket
motors containing 30 grams or less propellant are classed as Division
1.4S and items containing more than 30 grams of propellant but not more
than 62.5 grams of propellant are classed as Division 1.4C.
52 This entry may only be used for substances that do not exhibit
explosive properties of Class 1 (explosive) when tested in accordance
with Test Series 1 and 2 of Class 1 (explosive) in the UN Manual of
Tests and Criteria, Part I (incorporated by reference; see Sec. 171.7
of this subchapter).
53 Packages of these materials must bear the subsidiary risk label,
``EXPLOSIVE'', and the subsidiary hazard class/division must be entered
in parentheses immediately following the primary hazard class in the
shipping description, unless otherwise provided in this subchapter or
through an approval issued by the Associate Administrator, or the
competent authority of the country of origin. A copy of the approval
shall accompany the shipping papers.
54 Maneb or maneb preparations not meeting the definition of Division
4.3 or any other hazard class are not subject to the requirements of
this subchapter when transported by motor vehicle, rail car, or
aircraft.
55 This device must be approved in accordance with Sec. 173.56 of this
subchapter by the Associate Administrator.
56 A means to interrupt and prevent detonation of the detonator from
initiating the detonating cord must be installed between each electric
detonator and the detonating cord ends of the jet perforating guns
before the charged jet perforating guns are offered for transportation.
57 Maneb or Maneb preparations stabilized against self-heating need not
be classified in Division 4.2 when it can be demonstrated by testing
that a volume of 1 m3 of substance does not self-ignite and
that the temperature at the center of the sample does not exceed 200
[deg]C, when the sample is maintained at a temperature of not less than
75 [deg]C 2 [deg]C for a period of 24 hours, in
accordance with procedures set forth for testing self-heating materials
in the UN Manual of Tests and Criteria (IBR, see Sec. 171.7 of this
subchapter).
58 Aqueous solutions of Division 5.1 inorganic solid nitrate substances
are considered as not meeting the criteria of Division 5.1 if the
concentration of the substances in solution at the minimum temperature
encountered in transport is not greater than 80% of the saturation
limit.
59 Ferrocerium, stabilized against corrosion, with a minimum iron
content of 10 percent is not subject to the requirements of this
subchapter.
60 After September 30, 1997, an oxygen generator, chemical, that is
shipped with its means of initiation attached must incorporate at least
two positive means of preventing unintentional actuation of the
generator, and be classed and approved by the Associate Administrator.
The procedures for approval of a chemical oxygen generator that contains
an explosive means of initiation (e.g., a primer or electric match) are
specified in Sec. 173.56 of this subchapter. Each person who offers a
chemical oxygen generator for transportation after September 30, 1997,
shall: (1) ensure that it is offered in conformance with the conditions
of the approval; (2) maintain a copy of the approval at each facility
where the chemical oxygen generator is packaged; and (3) mark the
approval number on the outside of the package.
61 A chemical oxygen generator is spent if its means of ignition and all
or a part of its chemical contents have been expended.
64 The group of alkali metals includes lithium, sodium, potassium,
rubidium, and caesium.
65 The group of alkaline earth metals includes magnesium, calcium,
strontium, and barium.
[[Page 332]]
66 Formulations of these substances containing not less than 30 percent
non-volatile, non-flammable phlegmatizer are not subject to this
subchapter.
70 Black powder that has been classed in accordance with the
requirements of Sec. 173.56 of this subchapter may be reclassed and
offered for domestic transportation as a Division 4.1 material if it is
offered for transportation and transported in accordance with the
limitations and packaging requirements of Sec. 173.170 of this
subchapter.
74 During transport, this material must be protected from direct
sunshine and stored or kept in a cool and well-ventilated place, away
from all sources of heat.
77 For domestic transportation, a Division 5.1 subsidiary risk label is
required only if a carbon dioxide and oxygen mixture contains more than
23.5% oxygen.
78 This entry may not be used to describe compressed air which contains
more than 23.5 percent oxygen. An oxidizer label is not required for any
oxygen concentration of 23.5 percent or less.
79 This entry may not be used for mixtures that meet the definition for
oxidizing gas.
81 Polychlorinated biphenyl items, as defined in 40 CFR 761.3, for which
specification packagings are impractical, may be packaged in non-
specification packagings meeting the general packaging requirements of
subparts A and B of part 173 of this subchapter. Alternatively, the item
itself may be used as a packaging if it meets the general packaging
requirements of subparts A and B of part 173 of this subchapter.
101 The name of the particular substance or article must be specified.
102 The ends of the detonating cord must be tied fast so that the
explosive cannot escape.The articles may be transported as in Division
1.4 Compatibility Group D (1.4D) if all of the conditions specified in
Sec. 173.63(a) of this subchapter are met.
103 Detonators which will not mass detonate and undergo only limited
propagation in the shipping package may be assigned to 1.4B
classification code. Mass detonate means that more than 90 percent of
the devices tested in a package explode practically simultaneously.
Limited propagation means that if one detonator near the center of a
shipping package is exploded, the aggregate weight of explosives,
excluding ignition and delay charges, in this and all additional
detonators in the outside packaging that explode may not exceed 25
grams.
105 The word ``Agents'' may be used instead of ``Explosives'' when
approved by the Associate Administrator.
106 The recognized name of the particular explosive may be specified in
addition to the type.
107 The classification of the substance is expected to vary especially
with the particle size and packaging but the border lines have not been
experimentally determined; appropriate classifications should be
verified following the test procedures in Sec. Sec. 173.57 and 173.58
of this subchapter.
108 Fireworks must be so constructed and packaged that loose pyrotechnic
composition will not be present in packages during transportation.
109 Rocket motors must be nonpropulsive in transportation unless
approved in accordance with Sec. 173.56 of this subchapter. A rocket
motor to be considered ``nonpropulsive'' must be capable of unrestrained
burning and must not appreciably move in any direction when ignited by
any means.
110 Fire extinguishers transported under UN1044 may include installed
actuating cartridges (cartridges, power device of Division 1.4C or
1.4S), without changing the classification of Division 2.2, provided the
aggregate quantity of deflagrating (propellant) explosives does not
exceed 3.2 grams per extinguishing unit.
111 Explosive substances of Division 1.1 Compatibility Group A (1.1A)
are forbidden for transportation if dry or not desensitized, unless
incorporated in a device.
113 The sample must be given a tentative approval by an agency or
laboratory in accordance with Sec. 173.56 of this subchapter.
114 Jet perforating guns, charged, oil well, without detonator may be
reclassed to Division 1.4 Compatibility Group D (1.4D) if the following
conditions are met:
a. The total weight of the explosive contents of the shaped charges
assembled in the guns does not exceed 90.5 kg (200 pounds) per vehicle;
and
b. The guns are packaged in accordance with Packing Method US 1 as
specified in Sec. 173.62 of this subchapter.
115 Boosters with detonator, detonator assemblies and boosters with
detonators in which the total explosive charge per unit does not exceed
25 g, and which will not mass detonate and undergo only limited
propagation in the shipping package may be assigned to 1.4B
classification code. Mass detonate means more than 90 percent of the
devices tested in a package explode practically simultaneously. Limited
propagation means that if one booster near the center of the package is
exploded, the aggregate weight of explosives, excluding ignition and
delay charges, in this and all additional boosters in the outside
packaging that explode may not exceed 25 g.
116 Fuzes, detonating may be classed in Division 1.4 if the fuzes do not
contain more than 25 g of explosive per fuze and are made and packaged
so that they will not cause functioning of other fuzes, explosives or
other explosive devices if one of the
[[Page 333]]
fuzes detonates in a shipping packaging or in adjacent packages.
117 If shipment of the explosive substance is to take place at a time
that freezing weather is anticipated, the water contained in the
explosive substance must be mixed with denatured alcohol so that
freezing will not occur.
118 This substance may not be transported under the provisions of
Division 4.1 unless specifically authorized by the Associate
Administrator.
119 This substance, when in quantities of not more than 11.5 kg (25.3
pounds), with not less than 10 percent water, by mass, also may be
classed as Division 4.1, provided a negative test result is obtained
when tested in accordance with test series 6(c) of the UN Manual of
Tests and Criteria (IBR, see Sec. 171.7 of this subchapter).
120 The phlegmatized substance must be significantly less sensitive than
dry PETN.
121 This substance, when containing less alcohol, water or phlegmatizer
than specified, may not be transported unless approved by the Associate
Administrator.
123 Any explosives, blasting, type C containing chlorates must be
segregated from explosives containing ammonium nitrate or other ammonium
salts.
125 Lactose or glucose or similar materials may be used as a
phlegmatizer provided that the substance contains not less than 90%, by
mass, of phlegmatizer. These mixtures may be classified in Division 4.1
when tested in accordance with test series 6(c) of the UN Manual of
Tests and Criteria (IBR, see Sec. 171.7 of this subchapter) and
approved by the Associate Administrator. Testing must be conducted on at
least three packages as prepared for transport. Mixtures containing at
least 98%, by mass, of phlegmatizer are not subject to the requirements
of this subchapter. Packages containing mixtures with not less than 90%
by mass, of phlegmatizer need not bear a POISON subsidiary risk label.
127 Mixtures containing oxidizing and organic materials transported
under this entry may not meet the definition and criteria of a Class 1
material. (See Sec. 173.50 of this subchapter.)
128 Regardless of the provisions of Sec. 172.101(c)(12), aluminum
smelting by-products and aluminum remelting by-products described under
this entry, meeting the definition of Class 8, Packing Group II and III
may be classed as a Division 4.3 material and transported under this
entry. The presence of a Class 8 hazard must be communicated as required
by this Part for subsidiary hazards.
129 These materials may not be classified and transported unless
authorized by the Associate Administrator on the basis of results from
Series 2 Test and a Series 6(c) Test from the UN Manual of Tests and
Criteria (IBR, see Sec. 171.7 of this subchapter) on packages as
prepared for transport. The packing group assignment and packaging must
be approved by the Associate Administrator for Hazardous Materials
Safety on the basis of the criteria in Sec. 173.21 of this subchapter
and the package type used for the Series 6(c) test.
130 For other than a dry battery specifically covered by another entry
in the Sec. 172.101 Table, ``Batteries, dry'' are not subject to the
requirements of this subchapter when they are securely packaged and
offered for transportation in a manner that prevents the dangerous
evolution of heat (for example, by the effective insulation of exposed
terminals) and protects against short circuits.
131 This material may not be offered for transportation unless approved
by the Associate Administrator.
132 This entry may only be used for uniform, ammonium nitrate based
fertilizer mixtures, containing nitrogen, phosphate or potash, meeting
the following criteria: (1) Contains not more than 70% ammonium nitrate
and not more than 0.4% total combustible, organic material calculated as
carbon or (2) Contains not more than 45% ammonium nitrate and
unrestricted combustible material.
134 This entry only applies to vehicles, machinery and equipment powered
by wet batteries, sodium batteries, or lithium batteries that are
transported with these batteries installed. Examples of such items are
electrically-powered cars, lawn mowers, wheelchairs, and other mobility
aids. Self-propelled vehicles that also contain an internal combustion
engine must be consigned under the entry ``Vehicle, flammable gas
powered'' or ``Vehicle, flammable liquid powered'', as appropriate.
Except as provided in Special Provision A102, vehicles, machinery and
equipment powered by primary lithium batteries that are transported with
these batteries installed are forbidden aboard passenger-carrying
aircraft.
135 The entries ``Vehicle, flammable gas powered'' or ``Vehicle,
flammable liquid powered,'' as appropriate, must be used when internal
combustion engines are installed in a vehicle. These entries include
hybrid electric vehicles powered by both an internal combustion engine
and batteries.
136 This entry only applies to machinery and apparatus containing
hazardous materials as in integral element of the machinery or
apparatus. It may not be used to describe machinery or apparatus for
which a proper shipping name exists in the Sec. 172.101 Table. Except
when approved by the Associate Administrator, machinery or apparatus may
only contain hazardous materials for which exceptions are referenced in
Column (8) of the Sec. 172.101 Table and are
[[Page 334]]
provided in part 173, subpart D, of this subchapter. Hazardous materials
shipped under this entry are excepted from the labeling requirements of
this subchapter unless offered for transportation or transported by
aircraft and are not subject to the placarding requirements of part 172,
subpart F, of this subchapter. Orientation markings as described in
Sec. 172.312 (a)(2) are required when liquid hazardous materials may
escape due to incorrect orientation. The machinery or apparatus, if
unpackaged, or the packaging in which it is contained shall be marked
``Dangerous goods in machinery'' or ``Dangerous goods in apparatus'', as
appropriate, with the identification number UN3363. For transportation
by aircraft, machinery or apparatus may not contain any material
forbidden for transportation by passenger or cargo aircraft. The
Associate Administrator may except from the requirements of this
subchapter, equipment, machinery and apparatus provided:
a. It is shown that it does not pose a significant risk in
transportation;
b. The quantities of hazardous materials do not exceed those
specified in Sec. 173.4 of this subchapter; and
c. The equipment, machinery or apparatus conforms with Sec. 173.222
of this subchapter.
137 Cotton, dry; flax, dry; and sisal, dry are not subject to the
requirements of this subchapter when they are baled in accordance with
ISO 8115, ``Cotton Bales--Dimensions and Density'' (IBR, see Sec. 171.7
of this subchapter) to a density of not less than 360 kg/m\3\ (22.1 lb/
ft\3\) for cotton, 400 kg/m\3\ (24.97 lb/ft\3\) for flax and 620 kg/m\3\
(38.71 lb/ft\3\) for sisal and transported in a freight container or
closed transport vehicle.
138 Lead compounds which, when mixed in a ratio of 1:1000 with 0.07M
(Molar concentration) hydrochloric acid and stirred for one hour at a
temperature of 23 [deg]C 2 [deg]C, exhibit a
solubility of 5% or less are considered insoluble.
139 Use of the ``special arrangement'' proper shipping names for
international shipments must be made under an IAEA Certificate of
Competent Authority issued by the Associate Administrator in accordance
with the requirements in Sec. 173.471, Sec. 173.472, or Sec. 173.473
of this subchapter. Use of these proper shipping names for domestic
shipments may be made only under a DOT exemption, as defined in, and in
accordance with the requirements of subpart B of part 107 of this
subchapter.
140 This material is regulated only when it meets the defining criteria
for a hazardous substance or a marine pollutant. In addition, the column
5 reference is modified to read ``III'' on those occasions when this
material is offered for transportation or transported by highway or
rail.
141 A toxin obtained from a plant, animal, or bacterial source
containing an infectious substance, or a toxin contained in an
infectious substance, must be classed as Division 6.2, described as an
infectious substance, and assigned to UN 2814 or UN 2900, as
appropriate.
142 These hazardous materials may not be classified and transported
unless authorized by the Associate Administrator. The Associate
Administrator will base the authorization on results from Series 2 tests
and a Series 6(c) test from the UN Manual of Tests and Criteria (IBR,
see Sec. 171.7 of this subchapter) on packages as prepared for
transport in accordance with the requirements of this subchapter.
144 If transported as a residue in an underground storage tank (UST), as
defined in 40 CFR 280.12, that has been cleaned and purged or rendered
inert according to the American Petroleum Institute (API) Standard 1604
(IBR, see Sec. 171.7 of this subchapter), then the tank and this
material are not subject to any other requirements of this subchapter.
However, sediments remaining in the tank that meet the definition for a
hazardous material are subject to the applicable regulations of this
subchapter.
145 This entry applies to formulations that neither detonate in the
cavitated state nor deflagrate in laboratory testing, show no effect
when heated under confinement, exhibit no explosive power, and are
thermally stable (self-accelerating decomposition temperature (SADT) at
60 [deg]C (140 [deg]F) or higher for a 50 kg (110.2 lbs.) package).
Formulations not meeting these criteria must be transported under the
provisions applicable to the appropriate entry in the Organic Peroxide
Table in Sec. 173.225 of this subchapter.
146 This description may be used for a material that poses a hazard to
the environment but does not meet the definition for a hazardous waste
or a hazardous substance, as defined in Sec. 171.8 of this subchapter,
or any hazard class as defined in Part 173 of this subchapter, if it is
designated as environmentally hazardous by the Competent Authority of
the country of origin, transit or destination.
147 This entry applies to non-sensitized emulsions, suspensions and gels
consisting primarily of a mixture of ammonium nitrate and a fuel
intended to produce a Type E blasting explosive only after further
processing. The mixture typically has the following composition: 60--85%
ammonium nitrate; 5--30% water; 2--8% fuel; 0.5--4% emulsifier or
thickening agent; 0--10% soluble flame suppressants; and trace
additives. Other inorganic nitrate salts may replace part of the
ammonium nitrate. These
[[Page 335]]
substances may not be classified and transported unless approved by the
Associate Administrator.
149 When transported as a limited quantity or a consumer commodity, the
maximum net capacity specified in Sec. 173.150(b)(2) of this subchapter
for inner packagings may be increased to 5 L (1.3 gallons).
150 This description may be used only for uniform mixtures of
fertilizers containing ammonium nitrate as the main ingredient within
the following composition limits:
a. Not less than 90% ammonium nitrate with not more than 0.2% total
combustible, organic material calculated as carbon, and with added
matter, if any, that is inorganic and inert when in contact with
ammonium nitrate; or
b. Less than 90% but more than 70% ammonium nitrate with other
inorganic materials, or more than 80% but less than 90% ammonium nitrate
mixed with calcium carbonate and/or dolomite, and not more than 0.4%
total combustible, organic material calculated as carbon; or
c. Ammonium nitrate-based fertilizers containing mixtures of
ammonium nitrate and ammonium sulphate with more than 45% but less than
70% ammonium nitrate, and not more than 0.4% total combustible, organic
material calculated as carbon such that the sum of the percentage of
compositions of ammonium nitrate and ammonium sulphate exceeds 70%.
151 If this material meets the definition of a flammable liquid in Sec.
173.120 of this subchapter, a FLAMMABLE LIQUID label is also required
and the basic description on the shipping paper must indicate the Class
3 subsidiary hazard.
155 Fish meal or fish scrap may not be transported if the temperature at
the time of loading either exceeds 35 [deg]C (95 [deg]F), or exceeds 5
[deg]C (41 [deg]F) above the ambient temperature, whichever is higher.
156 Asbestos that is immersed or fixed in a natural or artificial binder
material, such as cement, plastic, asphalt, resins or mineral ore, or
contained in manufactured products is not subject to the requirements of
this subchapter.
157 This entry includes hybrid electric vehicles powered by both an
internal combustion engine and wet, sodium or lithium batteries
installed. Vehicles containing an internal combustion engine must be
consigned under the entry ``Vehicle, flammable gas powered'' or
``Vehicle, flammable liquid powered'', as appropriate. Except as
provided in Special Provision A102, vehicles powered by primary lithium
batteries, that are transported with these batteries installed are
forbidden aboard passenger-carrying aircraft.
159 This material must be protected from direct sunshine and kept in a
cool, well-ventilated place away from sources of heat.
160 This entry applies to articles that are used as life-saving vehicle
air bag inflators, air bag modules or seat-belt pretensioners containing
Class 1 (explosive) materials or materials of other hazard classes. Air
bag inflators and modules must be tested in accordance with Test series
6(c) of Part I of the UN Manual of Tests and Criteria (incorporated by
reference; see Sec. 171.7 of this subchapter), with no explosion of the
device, no fragmentation of device casing or pressure vessel, and no
projection hazard or thermal effect that would significantly hinder
fire-fighting or other emergency response efforts in the immediate
vicinity. If the air bag inflator unit satisfactorily passes the series
6(c) test, it is not necessary to repeat the test on the air bag module.
161 For domestic transport, air bag inflators, air bag modules or seat
belt pretensioners that meet the criteria for a Division 1.4G explosive
must be transported using the description, ``Articles, pyrotechnic for
technical purposes,'' UN0431.
162 This material may be transported under the provisions of Division
4.1 only if it is packed so that at no time during transport will the
percentage of diluent fall below the percentage that is stated in the
shipping description.
163 Substances must satisfactorily pass Test Series 8 of the UN Manual
of Tests and Criteria, Part I, Section 18 (IBR, see Sec. 171.7 of this
subchapter).
164 Substances must not be transported under this entry unless approved
by the Associate Administrator on the basis of the results of
appropriate tests according to Part I of the UN Manual of Tests and
Criteria (IBR, see Sec. 171.7 of this subchapter). The material must be
packaged so that the percentage of diluent does not fall below that
stated in the approval at any time during transportation.
165 These substances are susceptible to exothermic decomposition at
elevated temperatures. Decomposition can be initiated by heat, moisture
or by impurities (e.g., powdered metals (iron, manganese, cobalt,
magnesium)). During the course of transportation, these substances must
be shaded from direct sunlight and all sources of heat and be placed in
adequately ventilated areas.
166 When transported in non-friable tablet form calcium hypochlorite,
dry or hydrated, may be transported as a Packing Group III material.
167 These storage systems shall always be considered as containing
hydrogen.
170 Air must be eliminated from the vapor space by nitrogen or other
means.
[[Page 336]]
171 This entry may only be used when the material is transported in non-
friable tablet form or for granular or powered mixtures that have been
shown to meet the PG III criteria in Sec. 173.127.
172 This entry includes alcohol mixtures containing up to 5% petroleum
products.
173 An appropriate generic entry may be used for this material.
(2) ``A'' codes. These provisions apply only to transportation by
aircraft:
Code/Special Provisions
A1 Single packagings are not permitted on passenger aircraft.
A2 Single packagings are not permitted on aircraft.
A3 For combination packagings, if glass inner packagings (including
ampoules) are used, they must be packed with absorbent material in
tightly closed metal receptacles before packing in outer packagings.
A4 Liquids having an inhalation toxicity of Packing Group I are not
permitted on aircraft.
A5 Solids having an inhalation toxicity of Packing Group I are not
permitted on passenger aircraft and may not exceed a maximum net
quantity per package of 15 kg (33 pounds) on cargo aircraft.
A6 For combination packagings, if plastic inner packagings are used,
they must be packed in tightly closed metal receptacles before packing
in outer packagings.
A7 Steel packagings must be corrosion-resistant or have protection
against corrosion.
A8 For combination packagings, if glass inner packagings (including
ampoules) are used, they must be packed with cushioning material in
tightly closed metal receptacles before packing in outer packagings.
A9 For combination packagings, if plastic bags are used, they must be
packed in tightly closed metal receptacles before packing in outer
packagings.
A10 When aluminum or aluminum alloy construction materials are used,
they must be resistant to corrosion.
A11 For combination packagings, when metal inner packagings are
permitted, only specification cylinders constructed of metals which are
compatible with the hazardous material may be used.
A13 Bulk packagings are not authorized for transportation by aircraft.
A14 This material is not authorized to be transported as a limited
quantity or consumer commodity in accordance with Sec. 173.306 of this
subchapter when transported aboard an aircraft.
A19 Combination packagings consisting of outer fiber drums or plywood
drums, with inner plastic packagings, are not authorized for
transportation by aircraft.
A20 Plastic bags as inner receptacles of combination packagings are not
authorized for transportation by aircraft.
A29 Combination packagings consisting of outer expanded plastic boxes
with inner plastic bags are not authorized for transportation by
aircraft.
A30 Ammonium permanganate is not authorized for transportation on
aircraft.
A34 Aerosols containing a corrosive liquid in Packing Group II charged
with a gas are not permitted for transportation by aircraft.
A35 This includes any material which is not covered by any of the other
classes but which has an anesthetic, narcotic, noxious or other similar
properties such that, in the event of spillage or leakage on an
aircraft, extreme annoyance or discomfort could be caused to crew
members so as to prevent the correct performance of assigned duties.
A37 This entry applies only to a material meeting the definition in
Sec. 171.8 of this subchapter for self-defense spray.
A51 When transported by cargo-only aircraft, an oxygen generator must
conform to the provisions of an approval issued under Special Provision
60 and be contained in a packaging prepared and originally offered for
transportation by the approval holder.
A52 A cylinder containing Oxygen, compressed, may not be loaded into a
passenger-carrying aircraft or into an inaccessible cargo location on a
cargo-only aircraft unless it is placed in an overpack or outer
packaging that conforms to the performance criteria of Air Transport
Association (ATA) Specification No. 300 (IBR, see Sec. 171.7 of this
subchapter) for Category I shipping containers.
A53 Refrigerating machines and refrigerating machine components are not
subject to the requirements of this subchapter when containing less than
12 kg (26.4 pounds) of a non-flammable gas or when containing 12 L (3
gallons) or less of ammonia solution (UN2672) (see Sec. 173.307 of this
subchapter).
A54 Lithium batteries or lithium batteries contained or packed with
equipment that exceed the maximum gross weight allowed by Column (9B) of
the Sec. 172.101 Table may only be transported on cargo aircraft if
approved by the Associate Administrator.
A55 Prototype lithium batteries and cells that are packed with not more
than 24 cells or 12 batteries per packaging that have not completed the
test requirements in Sub-section 38.3 of the UN Manual of Tests and
Criteria (incorporated by reference; see Sec. 171.7 of this subchapter)
may be transported by cargo aircraft if approved by the Associate
Administrator and provided the following requirements are met:
[[Page 337]]
a. The cells and batteries must be transported in rigid outer
packagings that conform to the requirements of Part 178 of this
subchapter at the Packing Group I performance level; and
b. Each cell and battery must be protected against short circuiting,
must be surrounded by cushioning material that is non-combustible and
non-conductive, and must be individually packed in an inner packaging
that is placed inside an outer specification packaging.
A56 Radioactive material with a subsidiary hazard of Division 4.2,
Packing Group I, must be transported in Type B packages when offered for
transportation by aircraft. Radioactive material with a subsidiary
hazard of Division 2.1 is forbidden from transport on passenger
aircraft.
A81 The quantity limits in columns (9A) and (9B) do not apply to body
fluids known to contain or suspected of containing an infectious
substance when transported in primary receptacles not exceeding 1,000 mL
(34 ounces) and in outer packagings not exceeding 4 L (1 gallon) and
packaged in accordance with Sec. 173.196 of this subchapter.
A82 The quantity limits in columns (9A) and (9B) do not apply to human
or animal body parts, whole organs or whole bodies known to contain or
suspected of containing an infectious substance.
A100 Primary (non-rechargeable) lithium batteries and cells are
forbidden for transport aboard passenger carrying aircraft. Secondary
(rechargeable) lithium batteries and cells are authorized aboard
passenger carrying aircraft in packages that do not exceed a gross
weight of 5 kg.
A101 A primary (non-rechargeable) lithium battery or cell packed with
equipment is forbidden for transport aboard a passenger carrying
aircraft unless:
a. The battery or cell complies with the requirements and
limitations of Sec. 173.185(b)(1), (b)(2), (b)(3), (b)(4) and (b)(6) or
Sec. 173.185(c)(1), (c)(2), (c)(3) and (c)(5) of this subchapter;
b. The package contains no more than the number of lithium batteries
or cells necessary to power the intended piece of equipment;
c. The equipment and the battery or cell are packed in a strong
packaging;
d. The gross weight of the package does not exceed 5 kg. Packages
complying with the requirements of this special provision are excepted
from all other requirements of this subchapter.
A102 A primary (non-rechargeable) lithium battery or cell contained in
equipment is forbidden for transport aboard a passenger carrying
aircraft unless:
a. The battery or cell complies with the requirements and
limitations of Sec. 173.185(b)(1), (b)(2), (b)(3), (b)(4) and (b)(6) or
Sec. 173.185(c)(1), (c)(2), (c)(3) and (c)(5) of this subchapter;
b. The package contains no more than the number of lithium batteries
or cells necessary to power the intended piece of equipment;
c. The equipment containing the battery or cell is packed in strong
packagings; and
d. The net weight of the package does not exceed 5 kg. Packages
complying with the requirements of this special provision are excepted
from all other requirements of this subchapter.
A103 A secondary (rechargeable) lithium battery or cell packed with
equipment is authorized aboard passenger carrying aircraft in packages
that do not exceed a gross weight of 5 kg.
A104 A secondary (rechargeable) lithium battery or cell packed in
equipment is authorized aboard passenger carrying aircraft in packages
that do not exceed a net weight of 5 kg.
(3) ``B'' codes. These provisions apply only to bulk packagings.
Except as otherwise provided in this subchapter, these special
provisions do not apply to UN portable tanks or IBCs:
Code/Special Provisions
B1 If the material has a flash point at or above 38 [deg]C (100 [deg]F)
and below 93 [deg]C (200 [deg]F), then the bulk packaging requirements
of Sec. 173.241 of this subchapter are applicable. If the material has
a flash point of less than 38 [deg]C (100 [deg]F), then the bulk
packaging requirements of Sec. 173.242 of this subchapter are
applicable.
B2 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo
tanks are not authorized.
B3 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo
tanks and DOT 57 portable tanks are not authorized.
B4 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo
tanks are not authorized.
B5 Only ammonium nitrate solutions with 35 percent or less water that
will remain completely in solution under all conditions of transport at
a maximum lading temperature of 116 [deg]C (240 [deg]F) are authorized
for transport in the following bulk packagings: MC 307, MC 312, DOT 407
and DOT 412 cargo tanks with at least 172 kPa (25 psig) design pressure.
The packaging shall be designed for a working temperature of at least
121 [deg]C (250 [deg]F). Only Specifications MC 304, MC 307 or DOT 407
cargo tank motor vehicles are authorized for transportation by vessel.
B6 Packagings shall be made of steel.
B7 Safety relief devices are not authorized on multi-unit tank car
tanks. Openings for safety relief devices on multi-unit tank car tanks
shall be plugged or blank flanged.
[[Page 338]]
B8 Packagings shall be made of nickel, stainless steel, or steel with
nickel, stainless steel, lead or other suitable corrosion resistant
metallic lining.
B9 Bottom outlets are not authorized.
B10 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo
tanks, and DOT 57 portable tanks are not authorized.
B11 Tank car tanks must have a test pressure of at least 2,068.5 kPa
(300 psig). Cargo and portable tanks must have a design pressure of at
least 1,207 kPa (175 psig).
B13 A nonspecification cargo tank motor vehicle authorized in Sec.
173.247 of this subchapter must be at least equivalent in design and in
construction to a DOT 406 cargo tank or MC 306 cargo tank (if
constructed before August 31, 1995), except as follows:
a. Packagings equivalent to MC 306 cargo tanks are excepted from the
certification, venting, and emergency flow requirements of the MC 306
specification.
b. Packagings equivalent to DOT 406 cargo tanks are excepted from
Sec. Sec. 178.345-7(d)(5), circumferential reinforcements; 178.345-10,
pressure relief; 178.345-11, outlets; 178.345-14, marking, and 178.345-
15, certification.
c. Packagings are excepted from the design stress limits at elevated
temperatures, as described in Section VIII of the ASME Code (IBR, see
Sec. 171.7 of this subchapter). However, the design stress limits may
not exceed 25 percent of the stress for 0 temper at the maximum design
temperature of the cargo tank, as specified in the Aluminum
Association's ``Aluminum Standards and Data'' (IBR, see Sec. 171.7 of
this subchapter).
B14 Each bulk packaging, except a tank car or a multi-unit-tank car
tank, must be insulated with an insulating material so that the overall
thermal conductance at 15.5 [deg]C (60 [deg]F) is no more than 1.5333
kilojoules per hour per square meter per degree Celsius (0.075 Btu per
hour per square foot per degree Fahrenheit) temperature differential.
Insulating materials must not promote corrosion to steel when wet.
B15 Packagings must be protected with non-metallic linings impervious to
the lading or have a suitable corrosion allowance.
B16 The lading must be completely covered with nitrogen, inert gas or
other inert materials.
B18 Open steel hoppers or bins are authorized.
B23 Tanks must be made of steel that is rubber lined or unlined. Unlined
tanks must be passivated before being placed in service. If unlined
tanks are washed out with water, they must be repassivated prior to
return to service. Lading in unlined tanks must be inhibited so that the
corrosive effect on steel is not greater than that of hydrofluoric acid
of 65 percent concentration.
B25 Packagings must be made from monel or nickel or monel-lined or
nickel-lined steel.
B26 Tanks must be insulated. Insulation must be at least 100 mm (3.9
inches) except that the insulation thickness may be reduced to 51 mm (2
inches) over the exterior heater coils. Interior heating coils are not
authorized. The packaging may not be loaded with a material outside of
the packaging's design temperature range. In addition, the material also
must be covered with an inert gas or the container must be filled with
water to the tank's capacity. After unloading, the residual material
also must be covered with an inert gas or the container must be filled
with water to the tank's capacity.
B27 Tanks must have a service pressure of 1,034 kPa (150 psig). Tank car
tanks must have a test pressure rating of 1,379 kPa (200 psig). Lading
must be blanketed at all times with a dry inert gas at a pressure not to
exceed 103 kPa (15 psig).
B28 Packagings must be made of stainless steel.
B30 MC 312, MC 330, MC 331 and DOT 412 cargo tanks and DOT 51 portable
tanks must be made of stainless steel, except that steel other than
stainless steel may be used in accordance with the provisions of Sec.
173.24b(b) of this subchapter. Thickness of stainless steel for tank
shell and heads for cargo tanks and portable tanks must be the greater
of 7.62 mm (0.300 inch) or the thickness required for a tank with a
design pressure at least equal to 1.5 times the vapor pressure of the
lading at 46 [deg]C (115 [deg]F). In addition, MC 312 and DOT 412 cargo
tank motor vehicles must:
a. Be ASME Code (U) stamped for 100% radiography of all pressure-
retaining welds;
b. Have accident damage protection which conforms with Sec.
178.345-8 of this subchapter;
c. Have a MAWP or design pressure of at least 87 psig: and
d. Have a bolted manway cover.
B32 MC 312, MC 330, MC 331, DOT 412 cargo tanks and DOT 51 portable
tanks must be made of stainless steel, except that steel other than
stainless steel may be used in accordance with the provisions of Sec.
173.24b(b) of this subchapter. Thickness of stainless steel for tank
shell and heads for cargo tanks and portable tanks must be the greater
of 6.35 mm (0.250 inch) or the thickness required for a tank with a
design pressure at least equal to 1.3 times the vapor pressure of the
lading at 46 [deg]C (115 [deg]F). In addition, MC 312 and DOT 412 cargo
tank motor vehicles must:
a. Be ASME Code (U) stamped for 100% radiography of all pressure-
retaining welds;
[[Page 339]]
b. Have accident damage protection which conforms with Sec. 178.345-8
of this subchapter;
c. Have a MAWP or design pressure of at least 87 psig; and
d. Have a bolted manway cover.
B33 MC 300, MC 301, MC 302, MC 303, MC 305, MC 306, and DOT 406 cargo
tanks equipped with a 1 psig normal vent used to transport gasoline must
conform to Table I of this Special Provision. Based on the volatility
class determined by using ASTM D 439 and the Reid vapor pressure (RVP)
of the particular gasoline, the maximum lading pressure and maximum
ambient temperature permitted during the loading of gasoline may not
exceed that listed in Table I.
Table I--Maximum Ambient Temperature--Gasoline
------------------------------------------------------------------------
Maximum lading and ambient
ASTM D439 volatility class temperature (see note 1)
------------------------------------------------------------------------
A...................................... 131 [deg]F
(RVP<=9.0 psia)
B...................................... 124 [deg]F
(RVP<=10.0 psia)
C...................................... 116 [deg]F
(RVP<=11.5 psia)
D...................................... 107 [deg]F
(RVP<=13.5 psia)
E...................................... 100 [deg]F
(RVP<=15.0 psia)
------------------------------------------------------------------------
Note 1: Based on maximum lading pressure of 1 psig at top of cargo tank.
B35 Tank cars containing hydrogen cyanide may be alternatively marked
``Hydro cyanic acid, liquefied'' if otherwise conforming to marking
requirements in subpart D of this part. Tank cars marked ``HYDROCYANIC
ACID'' prior to October 1, 1991 do not need to be remarked.
B37 The amount of nitric oxide charged into any tank car tank may not
exceed 1,379 kPa (200 psig) at 21 [deg]C (70 [deg]F).
B42 Tank cars must have a test pressure of 34.47 Bar (500 psig) or
greater and conform to Class 105J. Each tank car must have a reclosing
pressure relief device having a start-to-discharge pressure of 10.34 Bar
(150 psig). The tank car specification may be marked to indicate a test
pressure of 13.79 Bar (200 psig).
B44 All parts of valves and safety relief devices in contact with lading
must be of a material which will not cause formation of acetylides.
B45 Each tank must have a reclosing combination pressure relief device
equipped with stainless steel or platinum rupture discs approved by the
AAR Tank Car Committee.
B46 The detachable protective housing for the loading and unloading
valves of multi-unit tank car tanks must withstand tank test pressure
and must be approved by the Associate Administrator.
B47 Each tank may have a reclosing pressure relief device having a
start-to-discharge pressure setting of 310 kPa (45 psig).
B48 Portable tanks in sodium metal service may be visually inspected at
least once every 5 years instead of being retested hydrostatically. Date
of the visual inspection must be stenciled on the tank near the other
required markings.
B49 Tanks equipped with interior heater coils are not authorized. Single
unit tank car tanks must have a reclosing pressure relief device having
a start-to-discharge pressure set at no more than 1551 kPa (225 psig).
B50 Each valve outlet of a multi-unit tank car tank must be sealed by a
threaded solid plug or a threaded cap with inert luting or gasket
material. Valves must be of stainless steel and the caps, plugs, and
valve seats must be of a material that will not deteriorate as a result
of contact with the lading.
B52 Notwithstanding the provisions of Sec. 173.24b of this subchapter,
non-reclosing pressure relief devices are authorized on DOT 57 portable
tanks.
B53 Packagings must be made of either aluminum or steel.
B54 Open-top, sift-proof rail cars are also authorized.
B55 Water-tight, sift-proof, closed-top, metal-covered hopper cars,
equipped with a venting arrangement (including flame arrestors) approved
by the Associate Administrator are also authorized.
B56 Water-tight, sift-proof, closed-top, metal-covered hopper cars are
also authorized if the particle size of the hazardous material is not
less than 149 microns.
B57 Class 115A tank car tanks used to transport chloroprene must be
equipped with a non-reclosing pressure relief device of a diameter not
less than 305 mm (12 inches) with a maximum rupture disc pressure of 310
kPa (45 psig).
B59 Water-tight, sift-proof, closed-top, metal-covered hopper cars are
also authorized provided that the lading is covered with a nitrogen
blanket.
B60 DOT Specification 106A500X multi-unit tank car tanks that are not
equipped with a pressure relief device of any type are authorized. For
the transportation of phosgene, the outage must be sufficient to prevent
tanks from becoming liquid full at 55 [deg]C (130 [deg]F).
B61 Written procedures covering details of tank car appurtenances, dome
fittings, safety devices, and marking, loading, handling, inspection,
and testing practices must be approved by the Associate Administrator
before any single unit tank car tank is offered for transportation.
[[Page 340]]
B64 Each single unit tank car tank built after December 31, 1990 must be
equipped with a tank head puncture resistance system that conforms to
Sec. 179.16 of this subchapter.
B65 Tank cars must have a test pressure of 34.47 Bar (500 psig) or
greater and conform to Class 105A. Each tank car must have a pressure
relief device having a start-to-discharge pressure of 15.51 Bar (225
psig). The tank car specification may be marked to indicate a test
pressure of 20.68 Bar (300 psig).
B66 Each tank must be equipped with gas tight valve protection caps.
Outage must be sufficient to prevent tanks from becoming liquid full at
55 [deg]C (130 [deg]F). Specification 110A500W tanks must be stainless
steel.
B67 All valves and fittings must be protected by a securely attached
cover made of metal not subject to deterioration by the lading, and all
valve openings, except safety valve, must be fitted with screw plugs or
caps to prevent leakage in the event of valve failure.
B68 Sodium must be in a molten condition when loaded and allowed to
solidify before shipment. Outage must be at least 5 percent at 98 [deg]C
(208 [deg]F). Bulk packagings must have exterior heating coils fusion
welded to the tank shell which have been properly stress relieved. The
only tank car tanks authorized are Class DOT 105 tank cars having a test
pressure of 2,069 kPa (300 psig) or greater.
B69 Dry sodium cyanide or potassium cyanide may be shipped in sift-proof
weather-resistant metal covered hopper car, covered motor vehicles,
portable tanks or non-specification bins. Bins must be approved by the
Associate Administrator.
B70 If DOT 103ANW tank car tank is used: All cast metal in contact with
the lading must have 96.7 percent nickel content; and the lading must be
anhydrous and free from any impurities.
B71 Tank cars must have a test pressure of 20.68 Bar (300 psig) or
greater and conform to Class 105, 112, 114 or 120.
B72 Tank cars must have a test pressure of 34.47 Bar (500 psig) or
greater and conform to Class 105J, 106, or 110.
B74 Tank cars must have a test pressure of 20.68 Bar (300 psig) or
greater and conform to Class 105S, 106, 110, 112J, 114J or 120S.
B76 Tank cars must have a test pressure of 20.68 Bar (300 psig) or
greater and conform to Class 105S, 112J, 114J or 120S. Each tank car
must have a reclosing pressure relief device having a start-to-discharge
pressure of 10.34 Bar (150 psig). The tank car specification may be
marked to indicate a test pressure of 13.79 Bar (200 psig).
B77 Other packaging are authorized when approved by the Associate
Administrator.
B78 Tank cars must have a test pressure of 4.14 Bar (60 psig) or greater
and conform to Class 103, 104, 105, 109, 111, 112, 114 or 120. Heater
pipes must be of welded construction designed for a test pressure of 500
psig. A 25 mm (1 inch) woven lining of asbestos or other approved
material must be placed between the bolster slabbing and the bottom of
the tank. If a tank car tank is equipped with a non-reclosing pressure
relief device, the rupture disc must be perforated with a 3.2 mm (0.13
inch) diameter hole. If a tank car tank is equipped with a reclosing
pressure relief valve, the tank must also be equipped with a vacuum
relief valve.
B80 Each cargo tank must have a minimum design pressure of 276 kPa (40
psig).
B81 Venting and pressure relief devices for tank car tanks and cargo
tanks must be approved by the Associate Administrator.
B82 Cargo tanks and portable tanks are not authorized.
B83 Bottom outlets are prohibited on tank car tanks transporting
sulfuric acid in concentrations over 65.25 percent.
B84 Packagings must be protected with non-metallic linings impervious to
the lading or have a suitable corrosion allowance for sulfuric acid or
spent sulfuric acid in concentration up to 65.25 percent.
B85 Cargo tanks must be marked with the name of the lading in accordance
with the requirements of Sec. 172.302(b).
B90 Steel tanks conforming or equivalent to ASME specifications which
contain solid or semisolid residual motor fuel antiknock mixture
(including rust, scale, or other contaminants) may be shipped by rail
freight or highway. The tank must have been designed and constructed to
be capable of withstanding full vacuum. All openings must be closed with
gasketed blank flanges or vapor tight threaded closures.
B115 Rail cars, highway trailers, roll-on/roll-off bins, or other non-
specification bulk packagings are authorized. Packagings must be sift-
proof, prevent liquid water from reaching the hazardous material, and be
provided with sufficient venting to preclude dangerous accumulation of
flammable, corrosive, or toxic gaseous emissions such as methane,
hydrogen, and ammonia. The material must be loaded dry.
(4) Table 1 and Table 2--IB Codes and IP Special IBC Packing
Provisions. These provisions apply only to transportation in IBCs. When
no IBC code is assigned in the Sec. 172.101 Table for a specific proper
shipping name, or in Sec. 173.225(e) for Type F organic peroxides, an
IBC may not be used unless authorized by the Associate Administrator.
The letter
[[Page 341]]
``Z'' shown in the marking code for composite IBCs must be replaced with
a capital code letter designation found in Sec. 178.702(a)(2) of this
subchapter to specify the material used for the outer packaging. Tables
1 and 2 follow:
Table 1.--IB Codes (IBC Codes)
------------------------------------------------------------------------
IBC Code Authorized IBCs
------------------------------------------------------------------------
IB1............................ Authorized IBCs: Metal (31A, 31B and
31N).
Additional Requirement: Only liquids
with a vapor pressure less than or
equal to 110 kPa at 50 [deg]C (1.1 bar
at 122 [deg]F), or 130 kPa at 55
[deg]C (1.3 bar at 131 [deg]F) are
authorized.
IB2............................ Authorized IBCs: Metal (31A, 31B and
31N); Rigid plastics (31H1 and 31H2);
Composite (31HZ1).
Additional Requirement: Only liquids
with a vapor pressure less than or
equal to 110 kPa at 50 [deg]C (1.1 bar
at 122 [deg]F), or 130 kPa at 55
[deg]C (1.3 bar at 131 [deg]F) are
authorized.
IB3............................ Authorized IBCs: Metal (31A, 31B and
31N); Rigid plastics (31H1 and 31H2);
Composite (31HZ1 and 31HA2, 31HB2,
31HN2, 31HD2 and 31HH2).
Additional Requirement: Only liquids
with a vapor pressure less than or
equal to 110 kPa at 50 [deg]C (1.1 bar
at 122 [deg]F), or 130 kPa at 55
[deg]C (1.3 bar at 131 [deg]F) are
authorized, except for UN2672 (also
see Special Provision IP8 in Table 2
for UN2672).
IB4............................ Authorized IBCs: Metal (11A, 11B, 11N,
21A, 21B, 21N, 31A, 31B and 31N).
IB5............................ Authorized IBCs: Metal (11A, 11B, 11N,
21A, 21B, 21N, 31A, 31B and 31N);
Rigid plastics (11H1, 11H2, 21H1,
21H2, 31H1 and 31H2); Composite
(11HZ1, 21HZ1 and 31HZ1).
IB6............................ Authorized IBCs: Metal (11A, 11B, 11N,
21A, 21B, 21N, 31A, 31B and 31N);
Rigid plastics (11H1, 11H2, 21H1,
21H2, 31H1 and 31H2); Composite
(11HZ1, 11HZ2, 21HZ1, 21HZ2, 31HZ1 and
31HZ2).
Additional Requirement: Composite IBCs
11HZ2 and 21HZ2 may not be used when
the hazardous materials being
transported may become liquid during
transport.
IB7............................ Authorized IBCs: Metal (11A, 11B, 11N,
21A, 21B, 21N, 31A, 31B and 31N);
Rigid plastics (11H1, 11H2, 21H1,
21H2, 31H1 and 31H2); Composite
(11HZ1, 11HZ2, 21HZ1, 21HZ2, 31HZ1 and
31HZ2); Wooden (11C, 11D and 11F).
Additional Requirement: Liners of
wooden IBCs must be sift- proof.
IB8............................ Authorized IBCs: Metal (11A, 11B, 11N,
21A, 21B, 21N, 31A, 31B and 31N);
Rigid plastics (11H1, 11H2, 21H1,
21H2, 31H1 and 31H2); Composite
(11HZ1, 11HZ2, 21HZ1, 21HZ2, 31HZ1 and
31HZ2); Fiberboard (11G); Wooden (11C,
11D and 11F); Flexible (13H1, 13H2,
13H3, 13H4, 13H5, 13L1, 13L2, 13L3,
13L4, 13M1 or 13M2).
IB9............................ IBCs are only authorized if approved by
the Associate Administrator.
------------------------------------------------------------------------
Table 2.--IP Codes
------------------------------------------------------------------------
IBC Code Authorized IBCs
------------------------------------------------------------------------
IP1............................ IBCs must be packed in closed freight
containers or a closed transport
vehicle.
IP2............................ When IBCs other than metal or rigid
plastics IBCs are used, they must be
offered for transportation in a closed
freight container or a closed
transport vehicle.
IP3............................ Flexible IBCs must be sift-proof and
water-resistant or must be fitted with
a sift-proof and water-resistant
liner.
IP4............................ Flexible, fiberboard or wooden IBCs
must be sift-proof and water-resistant
or be fitted with a sift-proof and
water-resistant liner.
IP5............................ IBCs must have a device to allow
venting. The inlet to the venting
device must be located in the vapor
space of the IBC under maximum filling
conditions.
IP6............................ Non-specification bulk bins are
authorized.
IP7............................ For UN identification numbers 1327,
1363, 1364, 1365, 1386, 1841, 2211,
2217, 2793 and 3314, IBCs are not
required to meet the IBC performance
tests specified in part 178, subpart N
of this subchapter.
IP8............................ Ammonia solutions may be transported in
rigid or composite plastic IBCs (31H1,
31H2 and 31HZ1) that have successfully
passed, without leakage or permanent
deformation, the hydrostatic test
specified in Sec. 178.814 of this
subchapter at a test pressure that is
not less than 1.5 times the vapor
pressure of the contents at 55 [deg]C
(131 [deg]F).
IP13........................... Transportation by vessel in IBCs is
prohibited.
IP14........................... Air shall be eliminated from the vapor
space by nitrogen or other means.
IP20........................... Dry sodium cyanide or potassium cyanide
is also permitted in siftproof, water-
resistant, fiberboard IBCs when
transported in closed freight
containers or transport vehicles.
------------------------------------------------------------------------
(5) ``N'' codes. These provisions apply only to non-bulk packagings:
Code/Special Provisions
N3 Glass inner packagings are permitted in combination or composite
packagings only if the hazardous material is free from hydrofluoric
acid.
N4 For combination or composite packagings, glass inner packagings,
other than ampoules, are not permitted.
N5 Glass materials of construction are not authorized for any part of a
packaging which is normally in contact with the hazardous material.
[[Page 342]]
N6 Battery fluid packaged with electric storage batteries, wet or dry,
must conform to the packaging provisions of Sec. 173.159 (g) or (h) of
this subchapter.
N7 The hazard class or division number of the material must be marked on
the package in accordance with Sec. 172.302 of this subchapter.
However, the hazard label corresponding to the hazard class or division
may be substituted for the marking.
N8 Nitroglycerin solution in alcohol may be transported under this entry
only when the solution is packed in metal cans of not more than 1 L
capacity each, overpacked in a wooden box containing not more than 5 L.
Metal cans must be completely surrounded with absorbent cushioning
material. Wooden boxes must be completely lined with a suitable material
impervious to water and nitroglycerin.
N10 Lighters and their inner packagings, which have been approved by the
Associate Administrator (see Sec. 173.21(i) of this subchapter), must
be packaged in one of the following outer packagings at the Packing
Group II level: 4C1 or 4C2 wooden boxes; 4D plywood boxes; 4F
reconstituted wood boxes; 4G fiberboard boxes; or 4H1 or 4H2 plastic
boxes. The approval number (e.g., T-* * *) must be marked on each outer
package and on the shipping paper.
N11 This material is excepted for the specification packaging
requirements of this subchapter if the material is packaged in strong,
tight non-bulk packaging meeting the requirements of subparts A and B of
part 173 of this subchapter.
N12 Plastic packagings are not authorized.
N20 A 5M1 multi-wall paper bag is authorized if transported in a closed
transport vehicle.
N25 Steel single packagings are not authorized.
N32 Aluminum materials of construction are not authorized for single
packagings.
N33 Aluminum drums are not authorized.
N34 Aluminum construction materials are not authorized for any part of a
packaging which is normally in contact with the hazardous material.
N36 Aluminum or aluminum alloy construction materials are permitted only
for halogenated hydrocarbons that will not react with aluminum.
N37 This material may be shipped in an integrally-lined fiber drum (1G)
which meets the general packaging requirements of subpart B of part 173
of this subchapter, the requirements of part 178 of this subchapter at
the packing group assigned for the material and to any other special
provisions of column 7 of the Sec. 172.101 table.
N40 This material is not authorized in the following packagings:
a. A combination packaging consisting of a 4G fiberboard box with
inner receptacles of glass or earthenware;
b. A single packaging of a 4C2 sift-proof, natural wood box; or
c. A composite packaging 6PG2 (glass, porcelain or stoneware
receptacles within a fiberboard box).
N41 Metal construction materials are not authorized for any part of a
packaging which is normally in contact with the hazardous material.
N42 1A1 drums made of carbon steel with thickness of body and heads of
not less than 1.3 mm (0.050 inch) and with a corrosion-resistant
phenolic lining are authorized for stabilized benzyl chloride if tested
and certified to the Packing Group I performance level at a specific
gravity of not less than 1.8.
N43 Metal drums are permitted as single packagings only if constructed
of nickel or monel.
N45 Copper cartridges are authorized as inner packagings if the
hazardous material is not in dispersion.
N65 Outage must be sufficient to prevent cylinders or spheres from
becoming liquid full at 55 [deg]C (130 [deg]F). The vacant space
(outage) may be charged with a nonflammable nonliquefied compressed gas
if the pressure in the cylinder or sphere at 55 [deg]C (130 [deg]F) does
not exceed 125 percent of the marked service pressure.
N72 Packagings must be examined by the Bureau of Explosives and approved
by the Associate Administrator.
N73 Packagings consisting of outer wooden or fiberboard boxes with inner
glass, metal or other strong containers; metal or fiber drums; kegs or
barrels; or strong metal cans are authorized and need not conform to the
requirements of part 178 of this subchapter.
N74 Packages consisting of tightly closed inner containers of glass,
earthenware, metal or polyethylene, capacity not over 0.5 kg (1.1
pounds) securely cushioned and packed in outer wooden barrels or wooden
or fiberboard boxes, not over 15 kg (33 pounds) net weight, are
authorized and need not conform to the requirements of part 178 of this
subchapter.
N75 Packages consisting of tightly closed inner packagings of glass,
earthenware or metal, securely cushioned and packed in outer wooden
barrels or wooden or fiberboard boxes, capacity not over 2.5 kg (5.5
pounds) net weight, are authorized and need not conform to the
requirements of part 178 of this subchapter.
N76 For materials of not more than 25 percent active ingredient by
weight, packages consisting of inner metal packagings not greater than
250 mL (8 ounces) capacity each, packed in strong outer packagings
together with sufficient absorbent material to completely absorb the
liquid contents are authorized and need not conform
[[Page 343]]
to the requirements of part 178 of this subchapter.
N77 For materials of not more than two percent active ingredients by
weight, packagings need not conform to the requirements of part 178 of
this subchapter, if liquid contents are absorbed in an inert material.
N78 Packages consisting of inner glass, earthenware, or polyethylene or
other nonfragile plastic bottles or jars not over 0.5 kg (1.1 pounds)
capacity each, or metal cans not over five pounds capacity each, packed
in outer wooden boxes, barrels or kegs, or fiberboard boxes are
authorized and need not conform to the requirements of part 178 of this
subchapter. Net weight of contents in fiberboard boxes may not exceed 29
kg (64 pounds). Net weight of contents in wooden boxes, barrels or kegs
may not exceed 45 kg (99 pounds).
N79 Packages consisting of tightly closed metal inner packagings not
over 0.5 kg (1.1 pounds) capacity each, packed in outer wooden or
fiberboard boxes, or wooden barrels, are authorized and need not conform
to the requirements of part 178 of this subchapter. Net weight of
contents may not exceed 15 kg (33 pounds).
N80 Packages consisting of one inner metal can, not over 2.5 kg (5.5
pounds) capacity, packed in an outer wooden or fiberboard box, or a
wooden barrel, are authorized and need not conform to the requirements
of part 178 of this subchapter.
N82 See Sec. 173.306 of this subchapter for classification criteria for
flammable aerosols.
N83 This material may not be transported in quantities of more than 11.5
kg (25.4 lbs) per package.
N84 The maximum quantity per package is 500 g (1.1 lbs.).
N85 Packagings certified at the Packing Group I performance level may
not be used.
(6) ``R'' codes. These provisions apply only to transportation by
rail. [Reserved]
(7) ``T'' codes. (i) These provisions apply to the transportation of
hazardous materials in UN portable tanks. Portable tank instructions
specify the requirements applicable to a portable tank when used for the
transportation of a specific hazardous material. These requirements must
be met in addition to the design and construction specifications in part
178 of this subchapter. Portable tank instructions T1 through T22
specify the applicable minimum test pressure, the minimum shell
thickness (in reference steel), bottom opening requirements and pressure
relief requirements. Liquefied compressed gases are assigned to portable
tank instruction T50. Refrigerated liquefied gases that are authorized
to be transported in portable tanks are specified in tank instruction
T75.
(ii) The following table specifies the portable tank requirements
applicable to ``T'' Codes T1 through T22. Column 1 specifies the ``T''
Code. Column 2 specifies the minimum test pressure, in bar (1 bar = 14.5
psig), at which the periodic hydrostatic testing required by Sec.
180.605 of this subchapter must be conducted. Column 3 specifies the
section reference for minimum shell thickness or, alternatively, the
minimum shell thickness value. Column 4 specifies the applicability of
Sec. 178.275(g)(3) of this subchapter for the pressure relief devices.
When the word ``Normal'' is indicated, Sec. 178.275(g)(3) of this
subchapter does not apply. Column 5 references the applicable
requirements for bottom openings in part 178 of this subchapter or
references ``Prohibited'' which means bottom openings are prohibited.
The table follows:
[[Page 344]]
Table of Portable Tank T Codes T1-T22
[Portable tank codes T1-T22 apply to liquid and solid hazardous materials of Classes 3 through 9 which are transported in portable tanks.]
--------------------------------------------------------------------------------------------------------------------------------------------------------
Pressure-relief
Portable tank instruction Minimum test Minimum shell thickness (in mm-reference requirements (See Sec. Bottom opening requirements (See
(1) pressure (bar) (2) steel) (See Sec. 178.274(d)) (3) 178.275(g)) (4) Sec. 178.275(d)) (5)
--------------------------------------------------------------------------------------------------------------------------------------------------------
T1.......................... 1.5 Sec. 178.274(d)(2) Normal................. Sec. 178.275(d)(2)
T2.......................... 1.5 Sec. 178.274(d)(2) Normal................. Sec. 178.275(d)(3)
T3.......................... 2.65 Sec. 178.274(d)(2) Normal................. Sec. 178.275(d)(2)
T4.......................... 2.65 Sec. 178.274(d)(2) Normal................. Sec. 178.275(d)(3)
T5.......................... 2.65 Sec. 178.274(d)(2) Sec. 178.275(g)(3)... Prohibited
T6.......................... 4 Sec. 178.274(d)(2) Normal................. Sec. 178.275(d)(2)
T7.......................... 4 Sec. 178.274(d)(2) Normal................. Sec. 178.275(d)(3)
T8.......................... 4 Sec. 178.274(d)(2) Normal................. Prohibited
T9.......................... 4 6 mm Normal................. Prohibited
T10......................... 4 6 mm Sec. 178.275(g)(3)... Prohibited
T11......................... 6 Sec. 178.274(d)(2) Normal................. Sec. 178.275(d)(3)
T12......................... 6 Sec. 178.274(d)(2) Sec. 178.275(g)(3)... Sec. 178.275(d)(3)
T13......................... 6 6 mm Normal................. Prohibited
T14......................... 6 6 mm Sec. 178.275(g)(3)... Prohibited
T15......................... 10 Sec. 178.274(d)(2) Normal................. Sec. 178.275(d)(3)
T16......................... 10 Sec. 178.274(d)(2) Sec. 178.275(g)(3)... Sec. 178.275(d)(3)
T17......................... 10 6 mm Normal................. Sec. 178.275(d)(3)
T18......................... 10 6 mm Sec. 178.275(g)(3)... Sec. 178.275(d)(3)
T19......................... 10 6 mm Sec. 178.275(g)(3)... Prohibited
T20......................... 10 8 mm Sec. 178.275(g)(3)... Prohibited
T21......................... 10 10 mm Normal................. Prohibited
T22......................... 10 10 mm Sec. 178.275(g)(3)... Prohibited
--------------------------------------------------------------------------------------------------------------------------------------------------------
[[Page 345]]
(iii) T50. When portable tank instruction T50 is referenced in
Column (7) of the Sec. 172.101 Table, the applicable liquefied
compressed gases are authorized to be transported in portable tanks in
accordance with the requirements of Sec. 173.313 of this subchapter.
(iv) T75. When portable tank instruction T75 is referenced in Column
(7) of the Sec. 172.101 Table, the applicable refrigerated liquefied
gases are authorized to be transported in portable tanks in accordance
with the requirements of Sec. 178.277 of this subchapter.
(v) UN and IM portable tank codes/special provisions. When a
specific portable tank instruction is specified by a ``T'' Code in
Column (7) of the Sec. 172.101 Table for a specific hazardous material,
a specification portable tank conforming to an alternative tank
instruction may be used if:
(A) The alternative portable tank has a higher or equivalent test
pressure (for example, 4 bar when 2.65 bar is specified);
(B) The alternative portable tank has greater or equivalent wall
thickness (for example, 10 mm when 6 mm is specified);
(C) The alternative portable tank has a pressure relief device as
specified in the ``T'' Code. If a frangible disc is required in series
with the reclosing pressure relief device for the specified portable
tank, the alternative portable tank must be fitted with a frangible disc
in series with the reclosing pressure relief device; and
(D) With regard to bottom openings--
(1) When two effective means are specified, the alternative portable
tank is fitted with bottom openings having two or three effective means
of closure or no bottom openings; or
(2) When three effective means are specified, the portable tank has
no bottom openings or three effective means of closure; or
(3) When no bottom openings are authorized, the alternative portable
tank must not have bottom openings.
(vi) Except when an organic peroxide is authorized under Sec.
173.225(g), if a hazardous material is not assigned a portable tank
``T'' Code, the hazardous material may not be transported in a portable
tank unless approved by the Associate Administrator.
(8) ``TP'' codes. (i) These provisions apply to the transportation
of hazardous materials in IM and UN Specification portable tanks.
Portable tank special provisions are assigned to certain hazardous
materials to specify requirements that are in addition to those provided
by the portable tank instructions or the requirements in part 178 of
this subchapter. Portable tank special provisions are designated with
the abbreviation TP (tank provision) and are assigned to specific
hazardous materials in Column (7) of the Sec. 172.101 Table.
(ii) The following is a list of the portable tank special
provisions:
Code/Special Provisions
TP1 The maximum degree of filling must not exceed the degree of
filling determined by the following:
[GRAPHIC] [TIFF OMITTED] TN21JN01.000
Where:
tr is the maximum mean bulk temperature during transport, and
tf is the temperature in degrees celsius of the liquid during
filling.
TP2 a. The maximum degree of filling must not exceed the degree of
filling determined by the following:
[GRAPHIC] [TIFF OMITTED] TN21JN01.001
Where:
tr is the maximum mean bulk temperature during transport,
tf is the temperature in degrees celsius of the liquid during
filling, and
[alpha] is the mean coefficient of cubical expansion of the liquid
between the mean temperature of the liquid during filling
(tf) and the maximum mean bulk temperature during
transportation (tr) both in degrees celsius.
b. For liquids transported under ambient conditions [alpha] may be
calculated using the formula:
[GRAPHIC] [TIFF OMITTED] TN21JN01.009
Where:
d15 and d50 are the densities (in units of mass
per unit volume) of the liquid at 15 [deg]C (59 [deg]F) and 50 [deg]C
(122 [deg]F), respectively.
[[Page 346]]
TP3 The maximum degree of filling (in %) for solids transported
above their melting points and for elevated temperature liquids shall be
determined by the following:
[GRAPHIC] [TIFF OMITTED] TR14JN05.003
Where: df and dr are the mean densities of the
liquid at the mean temperature of the liquid during filling and the
maximum mean bulk temperature during transport respectively.
TP4 The maximum degree of filling for portable tanks must not exceed
90%.
TP5 For a portable tank used for the transport of flammable
refrigerated liquefied gases or refrigerated liquefied oxygen, the
maximum rate at which the portable tank may be filled must not exceed
the liquid flow capacity of the primary pressure relief system rated at
a pressure not exceeding 120 percent of the portable tank's design
pressure. For portable tanks used for the transport of refrigerated
liquefied helium and refrigerated liquefied atmospheric gas (except
oxygen), the maximum rate at which the tank is filled must not exceed
the liquid flow capacity of the pressure relief device rated at 130
percent of the portable tank's design pressure. Except for a portable
tank containing refrigerated liquefied helium, a portable tank shall
have an outage of at least two percent below the inlet of the pressure
relief device or pressure control valve, under conditions of incipient
opening, with the portable tank in a level attitude. No outage is
required for helium.
TP6 The tank must be equipped with a pressure release device which
prevent a tank from bursting under fire engulfment conditions (the
conditions prescribed in CGA pamphlet S-1.2 (see Sec. 171.7 of this
subchapter) or alternative conditions approved by the Associate
Administrator may be used to consider the fire engulfment condition),
taking into account the properties of the hazardous material to be
transported.
TP7 The vapor space must be purged of air by nitrogen or other
means.
TP8 A portable tank having a minimum test pressure of 1.5 bar (150
kPa) may be used when the flash point of the hazardous material
transported is greater than 0 [deg]C (32 [deg]F).
TP9 A hazardous material assigned to special provision TP9 in Column
(7) of the Sec. 172.101 Table may only be transported in a portable
tank if approved by the Associate Administrator.
TP10 The portable tank must be fitted with a lead lining at least 5
mm (0.2 inches) thick. The lead lining must be tested annually to ensure
that it is intact and functional. Another suitable lining material may
be used if approved by the Associate Administrator.
TP12 This material is considered highly corrosive to steel.
TP13 Self-contained breathing apparatus must be provided when this
hazardous material is transported by sea.
TP16 The portable tank must be protected against over and under
pressurization which may be experienced during transportation. The means
of protection must be approved by the approval agency designated to
approve the portable tank in accordance with the procedures in part 107,
subpart E, of this subchapter. The pressure relief device must be
preceded by a frangible disk in accordance with the requirements in
Sec. 178.275(g)(3) of this subchapter to prevent crystallization of the
product in the pressure relief device.
TP17 Only inorganic non-combustible materials may be used for
thermal insulation of the tank.
TP18 The temperature of this material must be maintained between 18
[deg]C (64.4 [deg]F) and 40 [deg]C (104 [deg]F) while in transportation.
Portable tanks containing solidified methacrylic acid must not be
reheated during transportation.
TP19 The calculated wall thickness must be increased by 3 mm at the
time of construction. Wall thickness must be verified ultrasonically at
intervals midway between periodic hydraulic tests (every 2.5 years). The
portable tank must not be used if the wall thickness is less than that
prescribed by the applicable T code in Column (7) of the Table for this
material.
TP20 This hazardous material must only be transported in insulated
tanks under a nitrogen blanket.
TP21 The wall thickness must not be less than 8 mm. Portable tanks
must be hydraulically tested and internally inspected at intervals not
exceeding 2.5 years.
TP22 Lubricants for portable tank fittings (for example, gaskets,
shut-off valves, flanges) must be oxygen compatible.
TP24 The portable tank may be fitted with a device to prevent the
build up of excess pressure due to the slow decomposition of the
hazardous material being transported. The device must be in the vapor
space when the tank is filled under maximum filling conditions. This
device must also prevent an unacceptable amount of leakage of liquid in
the case of overturning.
TP25 Sulphur trioxide 99.95% pure and above may be transported in
tanks without an inhibitor provided that it is maintained at a
temperature equal to or above 32.5 [deg]C (90.5 [deg]F).
TP26 The heating device must be exterior to the shell. For UN 3176,
this requirement only applies when the hazardous material reacts
dangerously with water.
TP27 A portable tank having a minimum test pressure of 4 bar (400
kPa) may be used provided the calculated test pressure is 4 bar
[[Page 347]]
or less based on the MAWP of the hazardous material, as defined in Sec.
178.275 of this subchapter, where the test pressure is 1.5 times the
MAWP.
TP28 A portable tank having a minimum test pressure of 2.65 bar (265
kPa) may be used provided the calculated test pressure is 2.65 bar or
less based on the MAWP of the hazardous material, as defined in Sec.
178.275 of this subchapter, where the test pressure is 1.5 times the
MAWP.
TP29 A portable tank having a minimum test pressure of 1.5 bar
(150.0 kPa) may be used provided the calculated test pressure is 1.5 bar
or less based on the MAWP of the hazardous materials, as defined in
Sec. 178.275 of this subchapter, where the test pressure is 1.5 times
the MAWP.
TP30 This hazardous material may only be transported in insulated
tanks.
TP31 This hazardous material may only be transported in tanks in the
solid state.
TP32 Portable tanks may be used subject to the following conditions:
a. Each portable tank constructed of metal must be fitted with a
pressure-relief device consisting of a reclosing spring loaded type, a
frangible disc or a fusible element. The set to discharge for the spring
loaded pressure relief device and the burst pressure for the frangible
disc, as applicable, must not be greater than 2.65 bar for portable
tanks with minimum test pressures greater than 4 bar;
b. The suitability for transport in tanks must be demonstrated using
test 8(d) in Test Series 8 (see UN Manual of Tests and Criteria, Part 1,
Sub-section 18.7) (IBR, see Sec. 171.7 of this subchapter) or an
alternative means approved by the Associate Administrator.
TP33 The portable tank instruction assigned for this substance
applies for granular and powdered solids and for solids which are filled
and discharged at temperatures above their melting point which are
cooled and transported as a solid mass. Solid substances transported or
offered for transport above their melting point are authorized for
transportation in portable tanks conforming to the provisions of
portable tank instruction T4 for solid substances of packing group III
or T7 for solid substances of packing group II, unless a tank with more
stringent requirements for minimum shell thickness, maximum allowable
working pressure, pressure-relief devices or bottom outlets are assigned
in which case the more stringent tank instruction and special provisions
shall apply. Filling limits must be in accordance with portable tank
special provision TP3. Solids meeting the definition of an elevated
temperature material must be transported in accordance with the
applicable requirements of this subchapter.
TP37 IM portable tanks are only authorized for the shipment of
hydrogen peroxide solutions in water containing 72% or less hydrogen
peroxide by weight. Pressure relief devices shall be designed to prevent
the entry of foreign matter, the leakage of liquid and the development
of any dangerous excess pressure. In addition, the portable tank must be
designed so that internal surfaces may be effectively cleaned and
passivated. Each tank must be equipped with pressure relief devices
conforming to the following requirements:
------------------------------------------------------------------------
Total
Concentration of hydrogen per peroxide solution \1\
------------------------------------------------------------------------
52% or less................................................... 11
Over 52%, but not greater than 60%............................ 22
Over 60%, but not greater than 72%............................ 32
------------------------------------------------------------------------
\1\ Total venting capacity in standard cubic feet hour (S.C.F.H.) per
pound of hydrogen peroxide solution.
TP38 Each portable tank must be insulated with an insulating
material so that the overall thermal conductance at 15.5 [deg]C (60
[deg]F) is no more than 1.5333 kilojoules per hour per square meter per
degree Celsius (0.075 Btu per hour per square foot per degree
Fahrenheit) temperature differential. Insulating materials may not
promote corrosion to steel when wet.
TP44 Each portable tank must be made of stainless steel, except that
steel other than stainless steel may be used in accordance with the
provisions of Sec. 173.24b(b) of this subchapter. Thickness of
stainless steel for tank shell and heads must be the greater of 7.62 mm
(0.300 inch) or the thickness required for a portable tank with a design
pressure at least equal to 1.5 times the vapor pressure of the hazardous
material at 46 [deg]C (115 [deg]F).
TP45 Each portable tank must be made of stainless steel, except that
steel other than stainless steel may be used in accordance with the
provisions of 173.24b(b) of this subchapter. Thickness of stainless
steel for portable tank shells and heads must be the greater of 6.35 mm
(0.250 inch) or the thickness required for a portable tank with a design
pressure at least equal to 1.3 times the vapor pressure of the hazardous
material at 46 [deg]C (115 [deg]F).
TP46 Portable tanks in sodium metal service are not required to be
hydrostatically retested.
(9) ``W'' codes. These provisions apply only to transportation by
water:
Code/Special Provisions
W7 Vessel stowage category for uranyl nitrate hexahydrate solution is
``D'' as defined in Sec. 172.101(k)(4).
W8 Vessel stowage category for pyrophoric thorium metal or pyrophoric
uranium metal is ``D'' as defined in Sec. 172.101(k)(4).
W9 When offered for transportation by water, the following Specification
packagings are not authorized unless approved by the Associate
Administrator: woven
[[Page 348]]
plastic bags, plastic film bags, textile bags, paper bags, IBCs and bulk
packagings.
W41 When offered for transportation by water, this material must be
packaged in bales and be securely and tightly bound with rope, wire or
similar means.
[Amdt. 172-123, 55 FR 52582, Dec. 21, 1990]
Editorial Note: For Federal Register citations affecting Sec.
172.102, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Subpart C_Shipping Papers
Sec. 172.200 Applicability.
(a) Description of hazardous materials required. Except as otherwise
provided in this subpart, each person who offers a hazardous material
for transportation shall describe the hazardous material on the shipping
paper in the manner required by this subpart.
(b) This subpart does not apply to any material, other than a
hazardous substance, hazardous waste or marine pollutant, that is--
(1) Identified by the letter ``A'' in column 1 of the Sec. 172.101
table, except when the material is offered or intended for
transportation by air; or
(2) Identified by the letter ``W'' in column 1 of the Sec. 172.101
table, except when the material is offered or intended for
transportation by water; or
(3) An ORM-D, except when the material is offered or intended for
transportation by air.
[Amdt. 172-29A, 41 FR 40677, Sept. 20, 1976, as amended by Amdt. 172-58,
45 FR 34697, May 22, 1980; Amdt. 172-74, 47 FR 43065, Sept. 30, 1982;
Amdt. 172-112, 53 FR 17160, May 13, 1988; Amdt. 172-127, 57 FR 52938,
Nov. 5, 1992]
Sec. 172.201 Preparation and retention of shipping papers.
(a) Contents. When a description of hazardous material is required
to be included on a shipping paper, that description must conform to the
following requirements:
(1) When a hazardous material and a material not subject to the
requirements of this subchapter are described on the same shipping
paper, the hazardous material description entries required by Sec.
172.202 and those additional entries that may be required by Sec.
172.203:
(i) Must be entered first, or
(ii) Must be entered in a color that clearly contrasts with any
description on the shipping paper of a material not subject to the
requirements of this subchapter, except that a description on a
reproduction of a shipping paper may be highlighted, rather than
printed, in a contrasting color (the provisions of this paragraph apply
only to the basic description required by Sec. 172.202(a)(1), (2), (3),
and (4)), or
(iii) Must be identified by the entry of an ``X'' placed before the
proper shipping name in a column captioned ``HM.'' (The ``X'' may be
replaced by ``RQ,'' if appropriate.)
(2) The required shipping description on a shipping paper and all
copies thereof used for transportation purposes, must be legible and
printed (manually or mechanically) in English.
(3) Unless it is specifically authorized or required in this
subchapter, the required shipping description may not contain any code
or abbreviation.
(4) A shipping paper may contain additional information concerning
the material provided the information is not inconsistent with the
required description. Unless otherwise permitted or required by this
subpart, additional information must be placed after the basic
description required by Sec. 172.202(a).
(b) [Reserved]
(c) Continuation page. A shipping paper may consist of more than one
page, if each page is consecutively numbered and the first page bears a
notation specifying the total number of pages included in the shipping
paper. For example, ``Page 1 of 4 pages.''
(d) Emergency response telephone number. Except as provided in Sec.
172.604(c), a shipping paper must contain an emergency response
telephone number, as prescribed in subpart G of this part.
(e) Each person who provides a shipping paper must retain a copy of
the shipping paper required by Sec. 172.200(a), or an electronic image
thereof, that is accessible at or through its principal place of
business and must make the shipping paper available, upon request, to an
authorized official of a Federal, State, or local government agency at
reasonable times and locations. For a hazardous waste, the shipping
paper
[[Page 349]]
copy must be retained for three years after the material is accepted by
the initial carrier. For all other hazardous materials, the shipping
paper copy must be retained for 375 days after the material is accepted
by the initial carrier. Each shipping paper copy must include the date
of acceptance by the initial carrier, except that, for rail, vessel, or
air shipments, the date on the shipment waybill, airbill, or bill of
lading may be used in place of the date of acceptance by the initial
carrier. A motor carrier (as defined in Sec. 390.5 of subchapter B of
chapter III of subtitle B) using a shipping paper without change for
multiple shipments of one or more hazardous materials having the same
shipping name and identification number may retain a single copy of the
shipping paper, instead of a copy for each shipment made, if the carrier
also retains a record of each shipment made, to include shipping name,
identification number, quantity transported, and date of shipment.
[Amdt. 172-29A, 41 FR 40677, Sept. 20, 1976]
Editorial Note: For Federal Register citations affecting Sec.
172.201, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 172.202 Description of hazardous material on shipping papers.
(a) The shipping description of a hazardous material on the shipping
paper must include:
(1) The proper shipping name prescribed for the material in column 2
of the Sec. 172.101 table;
(2) The hazard class or division number prescribed for the material,
as shown in Column (3) of the Sec. 172.101 Table. Except for
combustible liquids, the subsidiary hazard class(es) or subsidiary
division number(s) must be entered in parentheses immediately following
the primary hazard class or division number.
In addition--
(i) The words ``Class'' or ``Division'' may be included preceding
the primary and subsidiary hazard class or division numbers.
(ii) The hazard class need not be included for the entry
``Combustible liquid, n.o.s.''.
(iii) For domestic shipments, primary and subsidiary hazard class or
division names may be entered following the numerical hazard class or
division, or following the basic description.
(3) The identification number prescribed for the material as shown
in column 4 of the Sec. 172.101 table;
(4) The packing group in Roman numerals, as designated for the
hazardous material in Column 5 of the Sec. 172.101 Table. Class 1
(explosives) materials, self-reactive substances, organic peroxides and
entries that are not assigned a packing group are excepted from this
requirement. The packing group may be preceded by the letters ``PG''
(for example, ``PG II''); and
(5) The total quantity of hazardous materials covered by the
description must be indicated (by mass or volume, or by activity for
Class 7 materials) and must include an indication of the applicable unit
of measurement. For example, ``200 kgs.'' or ``50 L.'' The following
provisions also apply:
(i) For Class 1 materials, the quantity must be the net explosive
mass. For an explosive that is an article, such as Cartridges, small
arms, the net explosive mass may be expressed in terms of the net mass
of either the article or the explosive materials contained in the
article.
(ii) For hazardous materials in salvage packaging, an estimate of
the total quantity is acceptable.
(iii) The following are excepted from the requirements of paragraph
(a)(5) of this section:
(A) Bulk packages, provided some indication of the total quantity is
shown, for example, ``1 cargo tank'' or ``2 IBCs.''
(B) Cylinders, provided some indication of the total quantity is
shown, for example, ``10 cylinders''.
(C) Packages containing only residue.
(6) The number and type of packages must be indicated. The type of
packages must be indicated by description of the package (for example,
``12 drums''). Indication of the packaging specification number
(``1H1'') may be included in the description of the package (for
example, ``12 1H1 drums'' or ``12 drums (UN 1A1).'' Abbreviations may be
used for indicating packaging types (for example, ``cyl.'' for
``cylinder'')
[[Page 350]]
provided the abbreviations are commonly accepted and recognizable.
(b) Except as provided in this subpart, the basic description
specified in paragraphs (a)(1), (2), (3) and (4) of this section must be
shown in sequence with no additional information interspersed. For
example, ``Cyclobutyl chloroformate, 6.1, (8,3), UN2744, PG II''.
Alternatively, the basic description may be shown with the
identification (ID) number listed first. For example, ``UN2744,
Cyclobutyl chloroformate, 6.1, (8, 3), PG II.''
(c) The total quantity of the material covered by one description
must appear before or after, or both before and after, the description
required and authorized by this subpart. The type of packaging and
destination marks may be entered in any appropriate manner before or
after the basic description. Abbreviations may be used to express units
of measurement and types of packagings.
(d) Technical and chemical group names may be entered in parentheses
between the proper shipping name and hazard class or following the basic
description. An appropriate modifier, such as ``contains'' or
``containing,'' and/or the percentage of the technical constituent may
also be used. For example: ``Flammable liquids, n.o.s. (contains Xylene
and Benzene), 3, UN 1993, II''.
(e) Except for those materials in the UN Recommendations, the ICAO
Technical Instructions, or the IMDG Code (IBR, see Sec. 171.7 of this
subchapter), a material that is not a hazardous material according to
this subchapter may not be offered for transportation or transported
when its description on a shipping paper includes a hazard class or an
identification number specified in the Sec. 172.101 Table.
[Amdt. 172-101, 45 FR 74665, Nov. 10, 1980, as amended by Amdt. 172-103,
51 FR 5970, Feb. 18, 1986; Amdt. 172-123, 55 FR 52589, Dec. 21, 1990; 56
FR 66252, Dec. 20, 1991; Amdt. 172-127, 57 FR 52938, Nov. 5, 1992; Amdt.
172-130, 58 FR 51531, Oct. 1, 1993; 66 FR 33425, June 21, 2001; 68 FR
45030, July 31, 2003; 68 FR 75741, Dec. 31, 2003; 69 FR 34611, June 22,
2004; 69 FR 54046, Sept. 7, 2004; 69 FR 76153, Dec. 20, 2004; 70 FR
34397, June 14, 2005]
Sec. 172.203 Additional description requirements.
(a) Exemptions. Each shipping paper issued in connection with a
shipment made under an exemption must bear the notation ``DOT-E''
followed by the exemption number assigned and so located that the
notation is clearly associated with the description to which the
exemption applies.
(b) Limited quantities. The description for a material offered for
transportation as ``limited quantity,'' as authorized by this
subchapter, must include the words ``Limited Quantity'' or ``Ltd Qty''
following the basic description.
(c) Hazardous substances. (1) Except for Class 7 (radioactive)
materials described in accordance with paragraph (d) of this section, if
the proper shipping name for a material that is a hazardous substance
does not identify the hazardous substance by name, the name of the
hazardous substance must be entered in parentheses in association with
the basic description. If the material contains two or more hazardous
substances, at least two hazardous substances, including the two with
the lowest reportable quantities (RQs), must be identified. For a
hazardous waste, the waste code (e.g., D001), if appropriate, may be
used to identify the hazardous substance.
(2) The letters ``RQ'' shall be entered on the shipping paper either
before or after, the basic description required by Sec. 172.202 for
each hazardous substance (see definition in Sec. 171.8 of this
subchapter). For example: ``RQ, Allyl alcohol, 6.1, UN 1098, I''; or
``Environmentally hazardous substance, solid, n.o.s., 9, UN 3077, III,
RQ (Adipic acid)''.
(d) Radioactive material. The description for a shipment of a Class
7 (radioactive) material must include the following additional entries
as appropriate:
(1) The name of each radionuclide in the Class 7 (radioactive)
material that is listed in Sec. 173.435 of this subchapter. For
mixtures of radionuclides, the radionulides that must be shown must be
determined in accordance with Sec. 173.433(g) of this subchapter.
Abbreviations, e.g., ``\99\Mo,'' are authorized.
(2) A description of the physical and chemical form of the material,
if the
[[Page 351]]
material is not in special form (generic chemical description is
acceptable for chemical form).
(3) The activity contained in each package of the shipment in terms
of the appropriate SI units (e.g., Becquerels (Bq), Terabecquerels
(TBq), etc.). The activity may also be stated in appropriate customary
units (Curies (Ci), milliCuries (mCi), microCuries (uCi), etc.) in
parentheses following the SI units. Abbreviations are authorized. Except
for plutonium-239 and plutonium-241, the weight in grams or kilograms of
fissile radionuclides may be inserted instead of activity units. For
plutonium-239 and plutonium-241, the weight in grams of fissile
radionuclides may be inserted in addition to the activity units.
(4) The category of label applied to each package in the shipment.
For example: ``RADIOACTIVE WHITE-I.''
(5) The transport index assigned to each package in the shipment
bearing RADIOACTIVE YELLOW-II or RADIOACTIVE YELLOW-III labels.
(6) For a package containing fissile Class 7 (radioactive) material:
(i) The words ``Fissile Excepted'' if the package is excepted
pursuant to Sec. 173.453 of this subchapter; or otherwise
(ii) The criticality safety index for that package.
(7) For a package approved by the U.S. Department of Energy (DOE) or
U.S. Nuclear Regulatory Commission (NRC), a notation of the package
identification marking as prescribed in the applicable DOE or NRC
approval (see Sec. 173.471 of the subchapter).
(8) For an export shipment or a shipment in a foreign made package,
a notation of the package identification marking as prescribed in the
applicable International Atomic Energy Agency (IAEA) Certificate of
Competent Authority which has been issued for the package (see Sec.
173.473 of the subchapter).
(9) For a shipment required by this subchapter to be consigned as
exclusive use:
(i) An indication that the shipment is consigned as exclusive use;
or
(ii) If all the descriptions on the shipping paper are consigned as
exclusive use, then the statement ``Exclusive Use Shipment'' may be
entered only once on the shipping paper in a clearly visible location.
(10) For the shipment of a package containing a highway route
controlled quantity of Class 7 (radioactive) materials (see Sec.
173.403 of this subchapter) the words ``Highway route controlled
quantity'' or ``HRCQ'' must be entered in association with the basic
description.
(e) Empty packagings. (1) The description on the shipping paper for
a packaging containing the residue of a hazardous material may include
the words ``RESIDUE: Last Contained * * *'' in association with the
basic description of the hazardous material last contained in the
packaging.
(2) The description on the shipping paper for a tank car containing
the residue of a hazardous material must include the phrase, ``RESIDUE:
LAST CONTAINED * * *'' before the basic description.
(f) Transportation by air. A statement indicating that the shipment
is within the limitations prescribed for either passenger and cargo
aircraft or cargo aircraft only must be entered on the shipping paper.
(g) Transportation by rail. (1) A shipping paper prepared by a rail
carrier for a rail car, freight container, transport vehicle or portable
tank that contains hazardous materials must include the reporting mark
and number when displayed on the rail car, freight container, transport
vehicle or portable tank.
(2) The shipping paper for each DOT-113 tank car containing a
Division 2.1 material or its residue must contain an appropriate
notation, such as ``DOT 113'', and the statement ``Do not hump or cut
off car while in motion.''
(3) When shipments of elevated temperature materials are transported
under the exception permitted in Sec. 173.247(h)(3) of this subchapter,
the shipping paper must contain an appropriate notation, such as
``Maximum operating speed 15 mph.''.
(h) Transportation by highway. Following the basic description for a
hazardous material in a Specification MC 330 or MC 331 cargo tank, there
must be entered for--
[[Page 352]]
(1) Anhydrous ammonia. (i) The words ``0.2 PERCENT WATER'' to
indicate the suitability for shipping anhydrous ammonia in a cargo tank
made of quenched and tempered steel as authorized by Sec. 173.315(a),
Note 14 of this subchapter, or
(ii) The words ``NOT FOR Q and T TANKS'' when the anhydrous ammonia
does not contain 0.2 percent or more water by weight.
(2) Liquefied petroleum gas. (i) The word ``NONCORROSIVE'' or
``NONCOR'' to indicate the suitability for shipping ``Noncorrosive''
liquefied petroleum gas in a cargo tank made of quenched and tempered
steel as authorized by Sec. 173.315(a), Note 15 of this subchapter, or
(ii) The words ``NOT FOR Q and T TANKS'' for grades of liquefied
petroleum gas other than ``Noncorrosive''.
(i) Transportation by water. Each shipment by water must have the
following additional shipping paper entries:
(1) The name of the shipper.
(2) Minimum flash point if 61 [deg]C or below (in [deg]C closed cup
(c.c.) in association with the basic description.
(3) For a hazardous material consigned under an ``n.o.s.'' entry not
included in the segregation groups listed in section 3.1.4 of the IMDG
Code but belonging, in the opinion of the consignor, to one of these
groups, the appropriate segregation group must be shown in association
with the basic description (for example, IMDG Code segregation group--1
Acids). When no segregation group is applicable, there is no requirement
to indicate that condition.
(j) [Reserved]
(k) Technical names for ``n.o.s.'' and other generic descriptions.
Unless otherwise excepted, if a material is described on a shipping
paper by one of the proper shipping names identified by the letter ``G''
in column (1) of the Sec. 172.101 Table, the technical name of the
hazardous material must be entered in parentheses in association with
the basic description. For example ``Corrosive liquid, n.o.s., (Octanoyl
chloride), 8, UN 1760, II'', or ``Corrosive liquid, n.o.s., 8, UN 1760,
II (contains Octanoyl chloride)''. The word ``contains'' may be used in
association with the technical name, if appropriate. For organic
peroxides which may qualify for more than one generic listing depending
on concentration, the technical name must include the actual
concentration being shipped or the concentration range for the
appropriate generic listing. For example, ``Organic peroxide type B,
solid, 5.2, UN 3102 (dibenzoyl peroxide, 52-100%)'' or ``Organic
peroxide type E, solid, 5.2, UN 3108 (dibenzoyl peroxide, paste,
<52%)''. Shipping descriptions for toxic materials that meet the
criteria of Division 6.1, PG I or II (as specified in Sec. 173.132(a)
of this subchapter) or Division 2.3 (as specified in Sec. 173.115(c) of
this subchapter) and are identified by the letter ``G'' in column (1) of
the Sec. 172.101 Table, must have the technical name of the toxic
constituent entered in parentheses in association with the basic
description.
(1) If a hazardous material is a mixture or solution of two or more
hazardous materials, the technical names of at least two components most
predominately contributing to the hazards of the mixture or solution
must be entered on the shipping paper as required by paragraph (k) of
this section. For example, ``Flammable liquid, corrosive, n.o.s., 3, UN
2924, II (contains Methanol, Potassium hydroxide)''.
(2) The provisions of this paragraph do not apply--
(i) To a material that is a hazardous waste and described using the
proper shipping name ``Hazardous waste, liquid or solid, n.o.s.'',
classed as a miscellaneous Class 9, provided the EPA hazardous waste
number is included on the shipping paper in association with the basic
description, or provided the material is described in accordance with
the provisions of Sec. 172.203(c) of this part.
(ii) To a material for which the hazard class is to be determined by
testing under the criteria in Sec. 172.101(c)(11).
(iii) If the n.o.s. description for the material (other than a
mixture of hazardous materials of different classes meeting the
definitions of more than one hazard class) contains the name of the
chemical element or group which is primarily responsible for the
material being included in the hazard class indicated.
[[Page 353]]
(iv) If the n.o.s. description for the material (which is a mixture
of hazardous materials of different classes meeting the definition of
more than one hazard class) contains the name of the chemical element or
group responsible for the material meeting the definition of one of
these classes. In such cases, only the technical name of the component
that is not appropriately identified in the n.o.s. description shall be
entered in parentheses.
(l) Marine pollutants. (1) If the proper shipping name for a
material which is a marine pollutant does not identify by name the
component which makes the material a marine pollutant, the name of that
component must appear in parentheses in association with the basic
description. Where two or more components which make a material a marine
pollutant are present, the names of at least two of the components most
predominantly contributing to the marine pollutant designation must
appear in parentheses in association with the basic description.
(2) The words ``Marine Pollutant'' shall be entered in association
with the basic description for a material which is a marine pollutant.
(3) Except for transportation by vessel, marine pollutants subject
to the provisions of 49 CFR 130.11 are excepted from the requirements of
paragraph (l) of this section if a phrase indicating the material is an
oil is placed in association with the basic description.
(4) Except when transported aboard vessel, marine pollutants in non-
bulk packagings are not subject to the requirements of this subchapter
(see Sec. 171.4 of this subchapter).
(m) Poisonous Materials. Notwithstanding the hazard class to which a
material is assigned, for materials that are poisonous by inhalation
(see Sec. 171.8 of this subchapter), the words ``Poison-Inhalation
Hazard'' or ``Toxic-Inhalation Hazard'' and the words ``Zone A'', ``Zone
B'', ``Zone C'', or ``Zone D'' for gases or ``Zone A'' or ``Zone B'' for
liquids, as appropriate, shall be entered on the shipping paper
immediately following the shipping description. The word ``Poison'' or
``Toxic'' need not be repeated if it otherwise appears in the shipping
description.
(n) Elevated temperature materials. If a liquid material in a
package meets the definition of an elevated temperature material in
Sec. 171.8 of this subchapter, and the fact that it is an elevated
temperature material is not disclosed in the proper shipping name (for
example, when the words ``Molten'' or ``Elevated temperature'' are part
of the proper shipping name), the word ``HOT'' must immediately precede
the proper shipping name of the material on the shipping paper.
(o) Organic peroxides and self-reactive materials. The description
on a shipping paper for a Division 4.1 (self-reactive) material or a
Division 5.2 (organic peroxide) material must include the following
additional information, as appropriate:
(1) If notification or competent authority approval is required, the
shipping paper must contain a statement of approval of the
classification and conditions of transport.
(2) For Division 4.1 (self-reactive) and Division 5.2 (organic
peroxide) materials that require temperature control during transport,
the control and emergency temperature must be included on the shipping
paper.
(3) The word ``SAMPLE'' must be included in association with the
basic description when a sample of a Division 4.1 (self-reactive)
material (see Sec. 173.224(c)(3) of this subchapter) or Division 5.2
(organic peroxide) material (see Sec. 173.225(b)(2) of this subchapter)
is offered for transportation.
[Amdt. 172-29A, 41 FR 40677, Sept. 20, 1976]
Editorial Note: For Federal Register citations affecting Sec.
172.203, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 172.204 Shipper's certification.
(a) General. Except as provided in paragraphs (b) and (c) of this
section, each person who offers a hazardous material for transportation
shall certify that the material is offered for transportation in
accordance with this subchapter by printing (manually or mechanically)
on the shipping paper containing the required shipping description the
certification contained in paragraph (a)(1) of this section or the
certification (declaration) containing
[[Page 354]]
the language contained in paragraph (a)(2) of this section.
(1) ``This is to certify that the above-named materials are properly
classified, described, packaged, marked and labeled, and are in proper
condition for transportation according to the applicable regulations of
the Department of Transportation.''
Note: In line one of the certification the words ``herein-named''
may be substituted for the words ``above-named''.
(2) ``I hereby declare that the contents of this consignment are
fully and accurately described above by the proper shipping name, and
are classified, packaged, marked and labelled/placarded, and are in all
respects in proper condition for transport according to applicable
international and national governmental regulations.''
(b) Exceptions. (1) Except for a hazardous waste, no certification
is required for a hazardous material offered for transportation by motor
vehicle and transported:
(i) In a cargo tank supplied by the carrier, or
(ii) By the shipper as a private carrier except for a hazardous
material that is to be reshipped or transferred from one carrier to
another.
(2) No certification is required for the return of an empty tank car
which previously contained a hazardous material and which has not been
cleaned or purged.
(c) Transportation by air--(1) General. Certification containing the
following language may be used in place of the certification required by
paragraph (a) of this section:
I hereby certify that the contents of this consignment are fully and
accurately described above by proper shipping name and are classified,
packaged, marked and labeled, and in proper condition for carriage by
air according to applicable national governmental regulations.
Note to paragraph (c)(1):
In the certification, the word ``packed'' may be used instead of the
word ``packaged'' until October 1, 2010.
(2) Certificate in duplicate. Each person who offers a hazardous
material to an aircraft operator for transportation by air shall provide
two copies of the certification required in this section. (See Sec.
175.30 of this subchapter.)
(3) Additional certification requirements. Effective October 1,
2006, each person who offers a hazardous material for transportation by
air must add to the certification required in this section the following
statement:
``I declare that all of the applicable air transport requirements
have been met.''
(i) Each person who offers any package or overpack of hazardous
materials for transport by air must ensure that:
(A) The articles or substances are not prohibited for transport by
air (see the Sec. 172.101 Table);
(B) The articles or substances are properly classed, marked and
labeled and otherwise in a condition for transport as required by this
subchapter;
(C) The articles or substances are packaged in accordance with all
the applicable air transport requirements, including appropriate types
of packaging that conform to the packing requirements and the ``A''
Special Provisions in Sec. 172.102; inner packaging and maximum
quantity per package limits; the compatibility requirements (see, for
example, Sec. 173.24 of this subchapter); and requirements for closure
for both inner and outer packagings, absorbent materials, and pressure
differential in Sec. 173.27 of this subchapter. Other requirements may
also apply. For example, single packagings may be prohibited, inner
packaging may need to be packed in intermediate packagings, and certain
materials may be required to be transported in packagings meeting a more
stringent performance level.
(ii) [Reserved]
(4) Radioactive material. Each person who offers any radioactive
material for transportation aboard a passenger-carrying aircraft shall
sign (mechanically or manually) a printed certificate stating that the
shipment contains radioactive material intended for use in, or incident
to, research, or medical diagnosis or treatment.
(d) Signature. The certifications required by paragraph (a) or (c)
of this section:
(1) Must be legibly signed by a principal, officer, partner, or
employee of the shipper or his agent; and
[[Page 355]]
(2) May be legibly signed manually, by typewriter, or by other
mechanical means.
[Amdt. 172-29A, 41 FR 40677, Sept. 20, 1976]
Editorial Note: For Federal Register citations affecting Sec.
172.204, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 172.205 Hazardous waste manifest.
(a) No person may offer, transport, transfer, or deliver a hazardous
waste (waste) unless an EPA Form 8700-22 and 8700-22A (when necessary)
hazardous waste manifest (manifest) is prepared in accordance with 40
CFR 262.20 and is signed, carried, and given as required of that person
by this section.
(b) The shipper (generator) shall prepare the manifest in accordance
with 40 CFR part 262.
(c) The original copy of the manifest must be dated by, and bear the
handwritten signature of, the person representing:
(1) The shipper (generator) of the waste at the time it is offered
for transportation, and
(2) The initial carrier accepting the waste for transportation.
(d) A copy of the manifest must be dated by, and bear the
handwritten signature of the person representing:
(1) Each subsequent carrier accepting the waste for transportation,
at the time of acceptance, and
(2) The designated facility receiving the waste, upon receipt.
(e) A copy of the manifest bearing all required dates and signatures
must be:
(1) Given to a person representing each carrier accepting the waste
for transportation,
(2) Carried during transportation in the same manner as required by
this subchapter for shipping papers,
(3) Given to a person representing the designated facility receiving
the waste,
(4) Returned to the shipper (generator) by the carrier that
transported the waste from the United States to a foreign destination
with a notation of the date of departure from the United States, and
(5) Retained by the shipper (generator) and by the initial and each
subsequent carrier for three years from the date the waste was accepted
by the initial carrier. Each retained copy must bear all required
signatures and dates up to and including those entered by the next
person who received the waste.
(f) Transportation by rail. Notwithstanding the requirements of
paragraphs (d) and (e) of this section, the following requirements
apply:
(1) When accepting hazardous waste from a non-rail transporter, the
initial rail transporter must:
(i) Sign and date the manifest acknowledging acceptance of the
hazardous waste;
(ii) Return a signed copy of the manifest to the non-rail
transporter;
(iii) Forward at least three copies of the manifest to:
(A) The next non-rail transporter, if any;
(B) The designated facility, if the shipment is delivered to that
facility by rail; or
(C) The last rail transporter designated to handle the waste in the
United States; and
(iv) Retain one copy of the manifest and rail shipping paper in
accordance with 40 CFR 263.22.
(2) Rail transporters must ensure that a shipping paper containing
all the information required on the manifest (excluding the EPA
identification numbers, generator certification and signatures) and, for
exports, an EPA Acknowledgment of Consent accompanies the hazardous
waste at all times. Intermediate rail transporters are not required to
sign either the manifest or shipping paper.
(3) When delivering hazardous waste to the designated facility, a
rail transporter must:
(i) Obtain the date of delivery and handwritten signature of the
owner or operator of the designated facility on the manifest or the
shipping paper (if the manifest has not been received by the facility);
and
(ii) Retain a copy of the manifest or signed shipping paper in
accordance with 40 CFR 263.22.
(4) When delivering hazardous waste to a non-rail transporter, a
rail transporter must:
(i) Obtain the date of delivery and the handwritten signature of the
next
[[Page 356]]
non-rail transporter on the manifest; and
(ii) Retain a copy of the manifest in accordance with 40 CFR 263.22.
(5) Before accepting hazardous waste from a rail transporter, a non-
rail transporter must sign and date the manifest and provide a copy to
the rail transporter.
(g) The person delivering a hazardous waste to an initial rail
carrier shall send a copy of the manifest, dated and signed by a
representative of the rail carrier, to the person representing the
designated facility.
(h) A hazardous waste manifest required by 40 CFR part 262,
containing all of the information required by this subpart, may be used
as the shipping paper required by this subpart.
(i) The shipping description for a hazardous waste must be modified
as required by Sec. 172.101(c)(9).
[Amdt. 172-58, 45 FR 34698, May 22, 1980, as amended by Amdt. 172-90, 49
FR 10510, Mar. 20, 1984; 49 FR 11184, Mar. 26, 1984; Amdt. 172-248, 61
FR 28675, June 5, 1996; 70 FR 34075, June 13, 2005]
Subpart D_Marking
Sec. 172.300 Applicability.
(a) Each person who offers a hazardous material for transportation
shall mark each package, freight container, and transport vehicle
containing the hazardous material in the manner required by this
subpart.
(b) When assigned the function by this subpart, each carrier that
transports a hazardous material shall mark each package, freight
container, and transport vehicle containing the hazardous material in
the manner required by this subpart.
[Amdt. 172-101, 45 FR 74666, Nov. 10, 1980]
Sec. 172.301 General marking requirements for non-bulk packagings.
(a) Proper shipping name and identification number. (1) Except as
otherwise provided by this subchapter, each person who offers a
hazardous material for transportation in a non-bulk packaging must mark
the package with the proper shipping name and identification number
(preceded by ``UN'' or ``NA,'' as appropriate) for the material as shown
in the Sec. 172.101 Table. Identification numbers are not required on
packagings that contain only ORM-D materials or limited quantities, as
defined in Sec. 171.8 of this subchapter, except for limited quantities
marked in accordance with the marking requirements in Sec. 172.315.
(2) The proper shipping name for a hazardous waste (as defined in
Sec. 171.8 of this subchapter) is not required to include the word
``waste'' if the package bears the EPA marking prescribed by 40 CFR
262.32.
(3) Large quantities of a single hazardous material in non-bulk
packages. A transport vehicle or freight container containing only a
single hazardous material in non-bulk packages must be marked, on each
side and each end as specified in the Sec. 172.332 or Sec. 172.336,
with the identification number specified for the hazardous material in
the Sec. 172.101 Table, subject to the following provisions and
limitations:
(i) Each package is marked with the same proper shipping name and
identification number;
(ii) The aggregate gross weight of the hazardous material is 4,000
kg (8,820 pounds) or more;
(iii) All of the hazardous material is loaded at one loading
facility;
(iv) The transport vehicle or freight container contains no other
material, hazardous or otherwise; and
(v) The identification number marking requirement of this paragraph
(a)(3) does not apply to Class 1, Class 7, or to non-bulk packagings for
which identification numbers are not required.
(b) Technical names. In addition to the marking required by
paragraph (a) of this section, each non-bulk packaging containing
hazardous materials subject to the provisions of Sec. 172.203(k) of
this part shall be marked with the technical name in parentheses in
association with the proper shipping name in accordance with the
requirements and exceptions specified for display of technical
descriptions on shipping papers in Sec. 172.203(k) of this part.
(c) Exemption packagings. The outside of each package authorized by
an exemption shall be plainly and durably marked ``DOT-E'' followed by
the exemption number assigned.
[[Page 357]]
(d) Consignee's or consignor's name and address. Each person who
offers for transportation a hazardous material in a non-bulk package
shall mark that package with the name and address of the consignor or
consignee except when the package is--
(1) Transported by highway only and will not be transferred from one
motor carrier to another; or
(2) Part of a carload lot, truckload lot or freight container load,
and the entire contents of the rail car, truck or freight container are
shipped from one consignor to one consignee.
(e) Previously marked packagings. A package which has been
previously marked as required for the material it contains and on which
the marking remains legible, need not be remarked. (For empty
packagings, see Sec. 173.29 of this subchapter.)
(f) NON-ODORIZED marking on cylinders containing LPG. After
September 30, 2006, no person may offer for transportation or transport
a specification cylinder, except a Specification 2P or 2Q container or a
Specification 39 cylinder, that contains an unodorized Liquefied
petroleum gas (LPG) unless it is legibly marked NON-ODORIZED or NOT
ODORIZED in letters not less than 6.3 mm (0.25 inches) in height near
the marked proper shipping name required by paragraph (a) of this
section.
[Amdt. 172-123, 55 FR 52590, Dec. 21, 1990, as amended by Amdt. 172-151,
62 FR 1227, Jan. 8, 1997; 62 FR 39404, July 22, 1997; 63 FR 16075, Apr.
1, 1998; 66 FR 45182, Aug. 28, 2001; 68 FR 45030, July 31, 2003; 69 FR
64471, Nov. 4, 2004]
Sec. 172.302 General marking requirements for bulk packagings.
(a) Identification numbers. Except as otherwise provided in this
subpart, no person may offer for transportation or transport a hazardous
material in a bulk packaging unless the packaging is marked as required
by Sec. 172.332 with the identification number specified for the
material in the Sec. 172.101 table--
(1) On each side and each end, if the packaging has a capacity of
3,785 L (1,000 gallons) or more;
(2) On two opposing sides, if the packaging has a capacity of less
than 3,785 L (1,000 gallons); or
(3) For cylinders permanently installed on a tube trailer motor
vehicle, on each side and each end of the motor vehicle.
(b) Size of markings. Except as otherwise provided, markings
required by this subpart on bulk packagings must--
(1) Have a width of at least 6.0 mm (0.24 inch) and a height of at
least 100 mm (3.9 inches) for rail cars;
(2) Have a width of at least 4.0 mm (0.16 inch) and a height of at
least 25 mm (one inch) for portable tanks with capacities of less than
3,785 L (1,000 gallons) and IBCs; and
(3) Have a width of at least 6.0 mm (0.24 inch) and a height of at
least 50 mm (2.0 inches) for cargo tanks and other bulk packagings.
(c) Exemption packagings. The outside of each bulk package used
under the terms of an exemption shall be plainly and durably marked
``DOT-E'' followed by the exemption number assigned.
(d) Each bulk packaging marked with a proper shipping name, common
name or identification number as required by this subpart must remain
marked when it is emptied unless it is--
(1) Sufficiently cleaned of residue and purged of vapors to remove
any potential hazard; or
(2) Refilled, with a material requiring different markings or no
markings, to such an extent that any residue remaining in the packaging
is no longer hazardous.
(e) Additional requirements for marking portable tanks, cargo tanks,
tank cars, multi-unit tank car tanks, and other bulk packagings are
prescribed in Sec. Sec. 172.326, 172.328, 172.330, and 172.331,
respectively, of this subpart.
(f) A bulk packaging marked prior to October 1, 1991, in conformance
to the regulations of this subchapter in effect on September 30, 1991,
need not be remarked if the key words of the proper shipping name are
identical to those currently specified in the Sec. 172.101 table. For
example, a tank car marked ``ANHYDROUS AMMONIA'' need not be remarked
``ANHYDROUS AMMONIA, LIQUEFIED''.
[[Page 358]]
(g) A rail car, freight container, truck body or trailer in which
the lading has been fumigated with any hazardous material, or is
undergoing fumigation, must be marked as specified in Sec. 173.9 of
this subchapter.
[Amdt. 172-123, 55 FR 52591, Dec. 21, 1990, as amended at 56 FR 66254,
Dec. 20, 1991; Amdt. 172-150, 61 FR 50624, Sept. 26, 1996; Amdt. 172-
151, 62 FR 1228, Jan. 8, 1997; 62 FR 39398, July 22, 1997; 66 FR 45379,
Aug. 28, 2001]
Sec. 172.303 Prohibited marking.
(a) No person may offer for transportation or transport a package
which is marked with the proper shipping name or identification number
of a hazardous material unless the package contains the identified
hazardous material or its residue.
(b) This section does not apply to--
(1) Transportation of a package in a transport vehicle or freight
container if the package is not visible during transportation and is
loaded by the shipper and unloaded by the shipper or consignee.
(2) Markings on a package which are securely covered in
transportation.
(3) The marking of a shipping name on a package when the name
describes a material not regulated under this subchapter.
[Amdt. 172-123, 55 FR 52591, Dec. 21, 1990, as amended at 56 FR 66254,
Dec. 20, 1991]
Sec. 172.304 Marking requirements.
(a) The marking required in this subpart--
(1) Must be durable, in English and printed on or affixed to the
surface of a package or on a label, tag, or sign.
(2) Must be displayed on a background of sharply contrasting color;
(3) Must be unobscured by labels or attachments; and
(4) Must be located away from any other marking (such as
advertising) that could substantially reduce its effectiveness.
(b) [Reserved]
[Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 172-29B,
41 FR 57067, Dec. 30, 1976]
Sec. 172.306 [Reserved]
Sec. 172.308 Authorized abbreviations.
(a) Abbreviations may not be used in a proper shipping name marking
except as authorized in this section.
(b) The abbreviation ``ORM'' may be used in place of the words
``Other Regulated Material.''
(c) Abbreviations which appear as authorized descriptions in column
2 of the Sec. 172.101 table (e.g., ``TNT'' and ``PCB'') are authorized.
[Amdt. 172-123, 55 FR 52591, Dec. 21, 1990, as amended by Amdt. 172-145,
60 FR 49110, Sept. 21, 1995]
Sec. 172.310 Class 7 (radioactive) materials.
In addition to any other markings required by this subpart, each
package containing Class 7 (radioactive) materials must be marked as
follows:
(a) Each package with a gross mass greater than 50 kg (110 lb) must
have its gross mass including the unit of measurement (which may be
abbreviated) marked on the outside of the package.
(b) Each industrial, Type A, Type B(U), or Type B(M) package must be
legibly and durably marked on the outside of the packaging, in letters
at least 13 mm (0.5 in) high, with the words ``TYPE IP-1,'' ``TYPE IP-
2,'' ``TYPE IP-3,'' ``TYPE A,'' ``TYPE B(U)'' or ``TYPE B(M),'' as
appropriate. A package which does not conform to Type IP-1, Type IP-2,
Type IP-3, Type A, Type B(U) or Type B(M) requirements may not be so
marked.
(c) Each package which conforms to an IP-1, IP-2, IP-3 or a Type A
package design must be legibly and durably marked on the outside of the
packaging with the international vehicle registration code of the
country of origin of the design. The international vehicle registration
code for packages designed by a United States company or agency is the
symbol ``USA.''
(d) Each package which conforms to a Type B(U) or Type B(M) package
design must have the outside of the outermost receptacle, which is
resistant to the effects of fire and water, plainly marked by embossing,
stamping or other means resistant to the effects of fire and water with
a radiation symbol
[[Page 359]]
that conforms to the requirements of Appendix B of this part.
(e) Each Type B(U), Type B(M) or fissile material package destined
for export shipment must also be marked ``USA'' in conjunction with the
specification marking, or other package certificate identification. (See
Sec. Sec. 173.471, 173.472, and 173.473 of this subchapter.)
[Docket No. RSPA-99-6283 (HM-230), 69 FR 3668, Jan. 26, 2004]
Sec. 172.312 Liquid hazardous materials in non-bulk packagings.
(a) Except as provided in this section, each non-bulk combination
package having inner packagings containing liquid hazardous materials
must be:
(1) Packed with closures upward, and
(2) Legibly marked, with package orientation markings that conform
pictorially to the illustration shown in this paragraph, on two opposite
vertical sides of the package with the arrows pointing in the correct
upright direction. Depicting a rectangular border around the arrows is
optional.
[GRAPHIC] [TIFF OMITTED] TC02MR91.011
(b) Arrows for purposes other than indicating proper package
orientation may not be displayed on a package containing a liquid
hazardous material.
(c) The requirements of paragraph (a) of this section do not apply
to--
(1) A non-bulk package with inner packagings which are cylinders.
(2) Except when offered or intended for transportation by aircraft,
packages containing flammable liquids in inner packagings of 1 L or less
prepared in accordance with Sec. 173.150 (b) or (c) of this subchapter.
(3) When offered or intended for transportation by aircraft,
packages containing flammable liquids in inner packagings of 120 mL (4
fluid oz.) or less prepared in accordance with Sec. 173.150 (b) or (c)
of this subchapter when packed with sufficient absorption material
between the inner and outer packagings to completely absorb the liquid
contents.
(4) Liquids contained in manufactured articles (e.g., alcohol or
mercury in thermometers) which are leak-tight in all orientations.
(5) A non-bulk package with hermetically-sealed inner packagings.
(6) Packages containing liquid infectious substances in primary
receptacles not exceeding 50 ml (1.7 oz.).
[Amdt. 172-123, 55 FR 52591, Dec. 21, 1990, as amended at 56 FR 66254,
Dec. 20, 1991; 57 FR 45458, Oct. 1, 1992; 64 FR 51918, Sept. 27, 1999;
66 FR 45379, Aug. 28, 2001; 68 FR 45030, July 31, 2003]
Sec. 172.313 Poisonous hazardous materials.
In addition to any other markings required by this subpart:
(a) A material poisonous by inhalation (see Sec. 171.8 of this
subchapter) shall be marked ``Inhalation Hazard'' in association with
the required labels or placards, as appropriate, and shipping name when
required. The marking must be on two opposing sides of a bulk packaging.
(See Sec. 172.302(b) of this subpart for size of markings on bulk
packages.) When the words ``Inhalation Hazard'' appear on the label, as
prescribed in Sec. Sec. 172.416 and 172.429, or placard, as prescribed
in Sec. Sec. 172.540 and 172.555, the ``Inhalation Hazard'' marking is
not required on the package.
(b) Each non-bulk plastic outer packaging used as a single or
composite packaging for materials meeting the definition of Division 6.1
(in Sec. 173.132 of this subchapter) shall be permanently marked, by
embossment or other durable means, with the word ``POISON'' in letters
at least 6.3 mm (0.25 inch) in height. Additional text or symbols
related to hazard warning may be included in the marking. The marking
[[Page 360]]
shall be located within 150 mm (6 inches) of the closure of the
packaging.
(c) A transport vehicle or freight container containing a material
poisonous by inhalation in non-bulk packages shall be marked, on each
side and each end as specified in Sec. 172.332 or Sec. 172.336, with
the identification number specified for the hazardous material in the
Sec. 172.101 table, subject to the following provisions and
limitations:
(1) The material is in Hazard Zone A or B;
(2) The transport vehicle or freight container is loaded at one
facility with 1,000 kg (2,205 pounds) or more aggregate gross weight of
the material in non-bulk packages marked with the same proper shipping
name and identification number; and
(3) If the transport vehicle or freight container contains more than
one material meeting the provisions of this paragraph (c), it shall be
marked with the identification number for one material, determined as
follows:
(i) For different materials in the same hazard zone, with the
identification number of the material having the greatest aggregate
gross weight; and
(ii) For different materials in both Hazard Zones A and B, with the
identification number for the Hazard Zone A material.
(d) For a packaging containing a Division 6.1 PG III material, ``PG
III'' may be marked adjacent to the POISON label. (See Sec.
172.405(c).)
[Amdt. 172-123, 55 FR 52592, Dec. 21, 1990, as amended at 57 FR 46624,
Oct. 9, 1992; Amdt. 172-151, 62 FR 1228, Jan. 8, 1997; 62 FR 39398,
39405, July 22, 1997; 63 FR 16075, Apr. 1, 1998; 64 FR 10776, Mar. 5,
1999]
Sec. 172.315 Packages containing limited quantities.
Except for transportation by aircraft or as otherwise provided in
this subchapter, a package containing a limited quantity of hazardous
materials is not required to be marked with the proper shipping name
provided it is marked with the identification (ID) number, preceded by
the letters ``UN'' or ``NA,'' as applicable, for the entry as shown in
the Sec. 172.101 Table, and placed within a square-on-point border in
accordance with the following:
(a) The ID number marking must be durable, legible and of such a
size relative to the package as to be readily visible. The width of line
forming the square-on-point must be at least 2 mm and the height of the
ID number must be at least 6 mm. The marking must be applied on at least
one side or one end of the outer packaging.
(b) When two or more hazardous materials with different ID numbers
are contained in the package, the packaging must be marked with either
individual square-on-points bearing a single ID number, or a single
square-on-point large enough to include each applicable ID number.
[68 FR 45030, July 31, 2003, as amended at 69 FR 76153, Dec. 20, 2004]
Sec. 172.316 Packagings containing materials classed as ORM-D.
(a) Each non-bulk packaging containing a material classed as ORM-D
must be marked on at least one side or end with the ORM-D designation
immediately following or below the proper shipping name of the material.
The ORM designation must be placed within a rectangle that is
approximately 6.3 mm (0.25 inches) larger on each side than the
designation. The designation for ORM-D must be:
(1) ORM-D-AIR for an ORM-D that is prepared for air shipment and
packaged in accordance with the provisions of Sec. 173.27 of this
subchapter.
(2) ORM-D for an ORM-D other than as described in paragraph (a)(1)
of this section.
(b) When the ORM-D marking including the proper shipping name can
not be affixed on the package surface, it may be on an attached tag.
(c) The marking ORM-D is the certification by the person offering
the packaging for transportation that the material is properly
described, classed, packaged, marked and labeled (when appropriate) and
in proper condition for transportation according to the applicable
regulations of this subchapter. This form of certification does not
preclude the requirement for a certificate on a shipping paper when
required by subpart C of this part.
[Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 172-123,
55 FR 52592, Dec. 21, 1990; 56 FR 66254, Dec. 20, 1991]
[[Page 361]]
Sec. 172.317 KEEP AWAY FROM HEAT handling mark.
(a) General. For transportation by aircraft, each package containing
self-reactive substances of Division 4.1 or organic peroxides of
Division 5.2 must be marked with the KEEP AWAY FROM HEAT handling mark
specified in this section.
(b) Location and design. The marking must be a rectangle measuring
at least 105 mm (4.1 inches) in height by 74 mm (2.9 inches) in width.
Markings with not less than half this dimension are permissible where
the dimensions of the package can only bear a smaller mark.
(c) KEEP AWAY FROM HEAT handling mark. The KEEP AWAY FROM HEAT
handling mark must conform to the following:
(1) Except for size, the KEEP AWAY FROM HEAT handling mark must
appear as follows:
[GRAPHIC] [TIFF OMITTED] TR20DE04.001
(2) The symbol, letters and border must be black and the background
white, except for the starburst which must be red.
(3) The KEEP AWAY FROM HEAT handling marking required by paragraph
(a) of this section must be durable, legible and displayed on a
background of contrasting color.
[69 FR 76153, Dec. 20, 2004]
[[Page 362]]
Sec. 172.320 Explosive hazardous materials.
(a) Except as otherwise provided in paragraphs (b), (c), (d) and (e)
of this section, each package containing a Class 1 material must be
marked with the EX-number for each substance, article or device
contained therein.
(b) Except for fireworks approved in accordance with Sec. 173.56(j)
of this subchapter, a package of Class 1 materials may be marked, in
lieu of the EX-number required by paragraph (a) of this section, with a
national stock number issued by the Department of Defense or identifying
information, such as a product code required by regulations for
commercial explosives specified in 27 CFR part 55, if the national stock
number or identifying information can be specifically associated with
the EX-number assigned.
(c) When more than five different Class 1 materials are packed in
the same package, the package may be marked with only five of the EX-
numbers, national stock numbers, product codes, or combination thereof.
(d) The requirements of this section do not apply if the EX-number,
product code or national stock number of each explosive item described
under a proper shipping description is shown in association with the
shipping description required by Sec. 172.202(a) of this part. Product
codes and national stock numbers must be traceable to the specific EX-
number assigned by the Associate Administrator.
(e) The requirements of this section do not apply to the following
Class 1 materials:
(1) Those being shipped to a testing agency in accordance with Sec.
173.56(d) of this subchapter;
(2) Those being shipped in accordance with Sec. 173.56(e) of this
subchapter, for the purposes of developmental testing;
(3) Those which meet the requirements of Sec. 173.56(h) of this
subchapter and therefore are not subject to the approval process of
Sec. 173.56 of this subchapter;
(4) Until October 1, 1993, those which are shipped under Sec.
171.19 of this subchapter; and
(5) Those that are transported in accordance with Sec. 173.56(c)(2)
of this subchapter and, therefore, are covered by a national security
classification currently in effect.
[Amdt. 172-123, 56 FR 66254, Dec. 20, 1991, as amended by Amdt. 172-139,
59 FR 67487, Dec. 29, 1994; 66 FR 45379, Aug. 28, 2001]
Sec. 172.322 Marine pollutants.
(a) For vessel transportation of each non-bulk packaging that
contains a marine pollutant--
(1) If the proper shipping name for a material which is a marine
pollutant does not identify by name the component which makes the
material a marine pollutant, the name of that component must be marked
on the package in parentheses in association with the marked proper
shipping name. Where two or more components which make a material a
marine pollutant are present, the names of at least two of the
components most predominantly contributing to the marine pollutant
designation must appear in parentheses in association with the marked
proper shipping name; and
(2) The MARINE POLLUTANT mark shall be placed in association with
the hazard warning labels required by subpart E of this part or, in the
absence of any labels, in association with the marked proper shipping
name.
(b) A bulk packaging that contains a marine pollutant must--
(1) Be marked with the MARINE POLLUTANT mark on at least two
opposing sides or two ends other than the bottom if the packaging has a
capacity of less than 3,785 L (1,000 gallons). The mark must be visible
from the direction it faces. The mark may be displayed in black
lettering on a square-on-point configuration having the same outside
dimensions as a placard; or
(2) Be marked on each end and each side with the MARINE POLLUTANT
mark if the packaging has a capacity of 3,785 L (1,000 gallons) or more.
The mark must be visible from the direction it faces. The mark may be
displayed in black lettering on a square-on-point configuration having
the same outside dimensions as a placard.
(c) A transport vehicle or freight container that contains a package
subject to the marking requirements of paragraph (a) or (b) of this
section must be marked with the MARINE POLLUTANT mark. The mark must
appear on
[[Page 363]]
each side and each end of the transport vehicle or freight container,
and must be visible from the direction it faces. This requirement may be
met by the marking displayed on a freight container or portable tank
loaded on a motor vehicle or rail car. This mark may be displayed in
black lettering on a white square-on-point configuration having the same
outside dimensions as a placard.
(d) The MARINE POLLUTANT mark is not required--
(1) On a combination package containing a severe marine pollutant
(see appendix B to Sec. 172.101), in inner packagings each of which
contains:
(i) 0.5 L (17 ounces) or less net capacity for liquids; or
(ii) 500 g (17.6 ounces) or less net capacity for solids.
(2) On a combination packaging containing a marine pollutant, other
than a severe marine pollutant, in inner packagings each of which
contains:
(i) 5 L (1.3 gallons) or less net capacity for liquids; or
(ii) 5 kg (11 pounds) or less net capacity for solids.
(3) Except for transportation by vessel, on a bulk packaging,
freight container or transport vehicle that bears a label or placard
specified in subparts E or F of this part.
(e) MARINE POLLUTANT mark. The MARINE POLLUTANT mark must conform to
the following:
(1) Except for size, the MARINE POLLUTANT mark must appear as
follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.012
(2) The symbol, letters and border must be black and the background
white, or the symbol, letters, border and background must be of
contrasting color to the surface to which the mark is affixed. Each side
of the mark must be--
(i) At least 100 mm (3.9 inches) for marks applied to:
(A) Non-bulk packagings, except in the case of packagings which,
because of their size, can only bear smaller marks; or
(B) Bulk packagings with a capacity of less than 3785 L (1,000
gallons); or
(ii) At least 250 mm (9.8 inches) for marks applied to all other
bulk packagings.
[[Page 364]]
(f) Exceptions. See Sec. 171.4(c).
[Amdt. 172-127, 57 FR 52938, Nov. 5, 1992, as amended by Amdt. 172-136,
59 FR 38064, July 26, 1994; Amdt. 172-145, 60 FR 49110, Sept. 21, 1995;
66 FR 45379, Aug. 28, 2001; 70 FR 56098, Sept. 23, 2005]
Sec. 172.323 Infectious substances.
(a) In addition to other requirements of this subpart, after
September 30, 2003, a bulk packaging containing a regulated medical
waste, as defined in Sec. 173.134(a)(5) of this subchapter, must be
marked with a BIOHAZARD marking conforming to 29 CFR
1910.1030(g)(1)(i)--
(1) On two opposing sides or two ends other than the bottom if the
packaging has a capacity of less than 3,785 L (1,000 gallons). The
BIOHAZARD marking must measure at least 152.4 mm (6 inches) on each side
and must be visible from the direction it faces.
(2) On each end and each side if the packaging has a capacity of
3,785 L (1,000 gallons) or more. The BIOHAZARD marking must measure at
least 152.4 mm (6 inches) on each side and must be visible from the
direction it faces.
(b) For a bulk packaging contained in or on a transport vehicle or
freight container, if the BIOHAZARD marking on the bulk packaging is not
visible, the transport vehicle or freight container must be marked as
required by paragraph (a) of this section on each side and each end.
(c) The background color for the BIOHAZARD marking required by
paragraph (a) of this section must be orange and the symbol and letters
must be black. Except for size the BIOHAZARD marking must appear as
follows:
[[Page 365]]
[GRAPHIC] [TIFF OMITTED] TR14AU02.005
(d) The BIOHAZARD marking required by paragraph (a) of this section
must be displayed on a background of contrasting color. It may be
displayed on a plain white square-on-point configuration having the same
outside dimensions as a placard, as specified in Sec. 172.519(c) of
this part.
[67 FR 53135, Aug. 14, 2002]
Sec. 172.324 Hazardous substances in non-bulk packagings.
For each non-bulk package that contains a hazardous substance--
(a) Except for packages of radioactive material labeled in
accordance with Sec. 172.403, if the proper shipping name of a material
that is a hazardous substance does not identify the hazardous substance
by name, the name of the hazardous substance must be marked on the
package, in parentheses,
[[Page 366]]
in association with the proper shipping name. If the material contains
two or more hazardous substances, at least two hazardous substances,
including the two with the lowest reportable quantities (RQs), must be
identified. For a hazardous waste, the waste code (e.g., D001), if
appropriate, may be used to identify the hazardous substance.
(b) The letters ``RQ'' shall be marked on the package in association
with the proper shipping name.
[Amdt. 172-108, 52 FR 4843, Feb. 17, 1987, as amended by Amdt. 172-119,
54 FR 39505, Sept. 26, 1989; Amdt. 172-122, 55 FR 46825, Nov. 7, 1990;
Amdt. 172-123, 55 FR 52592, Dec. 21, 1990; Amdt. 172-127, 57 FR 52939,
Nov. 5, 1992; Amdt. 172-149, 61 FR 27172, May 30, 1996]
Sec. 172.325 Elevated temperature materials.
(a) Except as provided in paragraph (b) of this section, a bulk
packaging containing an elevated temperature material must be marked on
two opposing sides with the word ``HOT'' in black or white Gothic
lettering on a contrasting background. The marking must be displayed on
the packaging itself or in black lettering on a plain white square-on-
point configuration having the same outside dimensions as a placard.
(See Sec. 172.302(b) for size of markings on bulk packagings.)
(b) Bulk packagings containing molten aluminum or molten sulfur must
be marked ``MOLTEN ALUMINUM'' or ``MOLTEN SULFUR'', respectively, in the
same manner as prescribed in paragraph (a) of this section.
(c) If the identification number is displayed on a white-square-on-
point display configuration, as prescribed in Sec. 172.336(b), the word
``HOT'' may be displayed in the upper corner of the same white-square-
on-point display configuration. The word ``HOT'' must be in black
letters having a height of at least 50 mm (2.0 inches). Except for size,
these markings shall be as illustrated for an Elevated temperature
material, liquid, n.o.s.:
[[Page 367]]
[GRAPHIC] [TIFF OMITTED] TR29DE94.000
[Amdt. 172-125, 58 FR 3348, Jan. 8, 1993, as amended by Amdt. 172-139,
59 FR 67487, Dec. 29, 1994]
Sec. 172.326 Portable tanks.
(a) Shipping name. No person may offer for transportation or
transport a portable tank containing a hazardous material unless it is
legibly marked on two opposing sides with the proper shipping name
specified for the material in the Sec. 172.101 table.
(b) Owner's name. The name of the owner or of the lessee, if
applicable, must be displayed on a portable tank that contains a
hazardous material.
(c) Identification numbers. (1) If the identification number
markings required by Sec. 172.302(a) are not visible, a transport
vehicle or freight container used to transport a portable tank
containing a hazardous material must be marked on each side and each end
as required by Sec. 172.332 with the identification number specified
for the material in the Sec. 172.101 table.
(2) Each person who offers a portable tank containing a hazardous
material to a motor carrier, for transportation in a transport vehicle
or freight container, shall provide the motor carrier with the required
identification numbers on placards, orange panels, or the white square-
on-point configuration, as appropriate, for each side and each end of
the transport vehicle or freight container from which identification
numbers on the portable tank are not visible.
[[Page 368]]
(d) NON-ODORIZED marking on portable tanks containing LPG. After
September 30, 2006, no person may offer for transportation or transport
a portable tank containing liquefied petroleum gas (LPG) that is
unodorized as authorized in Sec. 173.315(b)(1) unless it is legibly
marked NON-ODORIZED or NOT ODORIZED on two opposing sides near the
marked proper shipping name required by paragraph (a) of this section,
or near the placards.
[Amdt. 172-123, 55 FR 52592, Dec. 21, 1990, as amended at 56 FR 66255,
Dec. 20, 1991; 69 FR 64471, Nov. 4, 2004]
Sec. 172.328 Cargo tanks.
(a) Providing and affixing identification numbers. Unless a cargo
tank is already marked with the identification numbers required by this
subpart, the identification numbers must be provided or affixed as
follows:
(1) A person who offers a hazardous material to a motor carrier for
transportation in a cargo tank shall provide the motor carrier the
identification numbers on placards or shall affix orange panels
containing the required identification numbers, prior to or at the time
the material is offered for transportation.
(2) A person who offers a cargo tank containing a hazardous material
for transportation shall affix the required identification numbers on
panels or placards prior to or at the time the cargo tank is offered for
transportation.
(3) For a cargo tank transported on or in a transport vehicle or
freight container, if the identification number marking on the cargo
tank required by Sec. 172.302(a) would not normally be visible during
transportation--
(i) The transport vehicle or freight container must be marked as
required by Sec. 172.332 on each side and each end with the
identification number specified for the material in the Sec. 172.101
table; and
(ii) When the cargo tank is permanently installed within an enclosed
cargo body of the transport vehicle or freight container, the
identification number marking required by Sec. 172.302(a) need only be
displayed on each side and end of a cargo tank that is visible when the
cargo tank is accessed.
(b) Required markings: Gases. Except for certain nurse tanks which
must be marked as specified in Sec. 173.315(m) of this subchapter, each
cargo tank transporting a Class 2 material subject to this subchapter
must be marked, in lettering no less than 50 mm (2.0 inches), on each
side and each end with--
(1) The proper shipping name specified for the gas in the Sec.
172.101 table; or
(2) An appropriate common name for the material (e.g., ``Refrigerant
Gas'').
(c) QT/NQT markings. Each MC 330 and MC 331 cargo tank must be
marked near the specification plate, in letters no less than 50 mm (2.0
inches) in height, with--
(1) ``QT'', if the cargo tank is constructed of quenched and
tempered steel; or
(2) ``NQT'', if the cargo tank is constructed of other than quenched
and tempered steel.
(d) After October 3, 2005, each on-vehicle manually-activated remote
shutoff device for closure of the internal self-closing stop valve must
be identified by marking ``Emergency Shutoff'' in letters at least 0.75
inches in height, in a color that contrasts with its background, and
located in an area immediately adjacent to the means of closure.
(e) NON-ODORIZED marking on cargo tanks containing LPG. After
September 30, 2006, no person may offer for transportation or transport
a cargo tank containing liquefied petroleum gas (LPG) that is unodorized
as authorized in Sec. 173.315(b)(1) unless it is legibly marked NON-
ODORIZED or NOT ODORIZED on two opposing sides near the marked proper
shipping name as specified in paragraph (b)(1) of this section, or near
the placards.
[Amdt. 172-123, 55 FR 52592, Dec. 21, 1990, as amended at 56 FR 66255,
Dec. 20, 1991; Amdt. 172-151, 62 FR 1228, Jan. 8, 1997; 62 FR 39045,
July 22, 1997; 68 FR 19277, Apr. 18, 2003; 69 FR 64471, Nov. 4, 2004]
Sec. 172.330 Tank cars and multi-unit tank car tanks.
(a) Shipping name and identification number. No person may offer for
transportation or transport a hazardous material--
(1) In a tank car unless the following conditions are met:
[[Page 369]]
(i) The tank car must be marked on each side and each end as
required by Sec. 172.302 with the identification number specified for
the material in the Sec. 172.101 table; and
(ii) A tank car containing any of the following materials must be
marked on each side with the key words of the proper shipping name
specified for the material in the Sec. 172.101 table, or with a common
name authorized for the material in this subchapter (e.g., ``Refrigerant
Gas''):
Acrolein, stabilized
Ammonia, anhydrous, liquefied
Ammonia solutions (more than 50% ammonia)
Bromine or Bromine solutions
Bromine chloride
Chloroprene, stabilized
Dispersant gas or Refrigerant gas (as defined in Sec. 173.115 of this
subchapter)
Division 2.1 materials
Division 2.2 materials (in Class DOT 107 tank cars only)
Division 2.3 materials
Formic acid
Hydrocyanic acid, aqueous solutions
Hydrofluoric acid, solution
Hydrogen cyanide, stabilized (less than 3% water)
Hydrogen fluoride, anhydrous
Hydrogen peroxide, aqueous solutions (greater than 20% hydrogen
peroxide)
Hydrogen peroxide, stabilized
Hydrogen peroxide and peroxyacetic acid mixtures
Nitric acid (other than red fuming)
Phosphorus, amorphous
Phosphorus, white dry or Phosphorus, white, under water or Phosphorus
white, in solution, or Phosphorus, yellow dry or Phosphorus, yellow,
under water or Phosphorus, yellow, in solution
Phosphorus white, molten
Potassium nitrate and sodium nitrate mixtures
Potassium permanganate
Sulfur trioxide, stabilized
Sulfur trioxide, uninhibited
(2) In a multi-unit tank car tank, unless the tank is marked on two
opposing sides, in letters and numerals no less than 50 mm (2.0 inches)
high--
(i) With the proper shipping name specified for the material in the
Sec. 172.101 table or with a common name authorized for the material in
this subchapter (e.g., ``Refrigerant Gas''); and
(ii) With the identification number specified for the material in
the Sec. 172.101 table, unless marked in accordance with Sec. Sec.
172.302(a) and 172.332 of this subpart.
(b) A motor vehicle or rail car used to transport a multi-unit tank
car tank containing a hazardous material must be marked on each side and
each end, as required by Sec. 172.332, with the identification number
specified for the material in the Sec. 172.101 table.
(c) After September 30, 2006, no person may offer for transportation
or transport a tank car or multi-unit tank car tank containing liquefied
petroleum gas (LPG) that is unodorized unless it is legibly marked NON-
ODORIZED or NOT ODORIZED on two opposing sides near the marked proper
shipping name required by paragraphs (a)(1) and (a)(2) of this section,
or near the placards. The NON-ODORIZED or NOT ODORIZED marking may
appear on a tank car or multi-unit tank car tank used for both
unodorized and odorized LPG.
[Amdt. 172-123, 55 FR 52593, Dec. 21, 1990, as amended at 56 FR 66255,
Dec. 20, 1991; 57 FR 45458, Oct. 1, 1992; Amdt. 172-148, 61 FR 28676,
June 5, 1996; Amdt. 172-148, 61 FR 50254, Sept. 25, 1996; 66 FR 33425,
June 21, 2001; 69 FR 64471, Nov. 4, 2004]
Sec. 172.331 Bulk packagings other than portable tanks, cargo tanks,
tank cars and multi-unit tank car tanks.
(a) Each person who offers a hazardous material to a motor carrier
for transportation in a bulk packaging shall provide the motor carrier
with the required identification numbers on placards or plain white
square-on-point display configurations, as authorized, or shall affix
orange panels containing the required identification numbers to the
packaging prior to or at the time the material is offered for
transportation, unless the packaging is already marked with the
identification number as required by this subchapter.
(b) Each person who offers a bulk packaging containing a hazardous
material for transportation shall affix to the packaging the required
identification numbers on orange panels, square-on-point configurations
or placards, as appropriate, prior to, or at the time the packaging is
offered for transportation unless it is already marked with
identification numbers as required by this subchapter.
[[Page 370]]
(c) For a bulk packaging contained in or on a transport vehicle or
freight container, if the identification number marking on the bulk
packaging (e.g., an IBC) required by Sec. 172.302(a) is not visible,
the transport vehicle or freight container must be marked as required by
Sec. 172.332 on each side and each end with the identification number
specified for the material in the Sec. 172.101 table.
[Amdt. 172-123, 55 FR 52593, Dec. 21, 1994, as amended by Amdt. 172-151,
62 FR 1228, Jan. 8, 1997; 62 FR 39398, July 22, 1997]
Sec. 172.332 Identification number markings.
(a) General. When required by Sec. 172.301, Sec. 172.302, Sec.
172.313, Sec. 172.326, Sec. 172.328, Sec. 172.330, or Sec. 172.331,
identification number markings must be displayed on orange panels or
placards as specified in this section, or on white square-on-point
configurations as prescribed in Sec. 172.336(b).
(b) Orange panels. Display of an identification number on an orange
panel shall be in conformance with the following:
(1) The orange panel must be 160 mm (6.3 inches) high by 400 mm
(15.7 inches) wide with a 15 mm (0.6 inches) black outer border. The
identification number shall be displayed in 100 mm (3.9 inches) black
Helvetica Medium numerals on the orange panel. Measurements may vary
from those specified plus or minus 5 mm (0.2 inches).
(2) The orange panel may be made of any durable material prescribed
for placards in Sec. 172.519, and shall be of the orange color
specified for labels or placards in appendix A to this part.
(3) The name and hazard class of a material may be shown in the
upper left border of the orange panel in letters not more than 18 points
(0.25 in.) high.
(4) Except for size and color, the orange panel and identification
numbers shall be as illustrated for Liquefied petroleum gas:
[GRAPHIC] [TIFF OMITTED] TC02MR91.013
(c) Placards. Display of an identification number on a hazard
warning placard shall be in conformance with the following:
(1) The identification number shall be displayed across the center
area of the placard in 88 mm (3.5 inches) black Alpine Gothic or
Alternate Gothic No. 3 numerals on a white background 100 mm (3.9
inches) high and approximately 215 mm (8.5 inches) wide and may be
outlined with a solid or dotted line border.
(2) The top of the 100 mm (3.9 inches) high white background shall
be approximately 40 mm (1.6 inches) above the placard horizontal center
line.
(3) An identification number may be displayed only on a placard
corresponding to the primary hazard class of the hazardous material.
(4) For a COMBUSTIBLE placard used to display an identification
number, the entire background below the white background for the
identification number must be white during transportation by rail and
may be white during transportation by highway.
(5) The name of the hazardous material and the hazard class may be
shown in letters not more than 18 points high immediately within the
upper border of the space on the placard bearing the identification
number of the material.
(6) If an identification number is placed over the word(s) on a
placard, the word(s) should be substantially covered to maximize the
effectiveness of the identification number.
(d) Except for size and color, the display of an identification
number on a placard shall be as illustrated for Acetone:
[[Page 371]]
[GRAPHIC] [TIFF OMITTED] TC02MR91.014
[Amdt. 172-101, 45 FR 74667, Nov. 10, 1980, as amended by Amdt. 172-81,
48 FR 28099, June 20, 1983; Amdt. 172-110, 52 FR 29527, Aug. 10, 1987;
Amdt. 172-123, 55 FR 52593, Dec. 21, 1990; 56 FR 66255, Dec. 20, 1991;
Amdt. 172-151, 62 FR 1228, Jan. 8, 1997; 65 FR 50459, Aug. 18, 2000; 68
FR 57632, Oct. 6, 2003]
Sec. 172.334 Identification numbers; prohibited display.
(a) No person may display an identification number on a RADIOACTIVE,
EXPLOSIVES 1.1, 1.2, 1.3, 1.4, 1.5 or 1.6, DANGEROUS, or subsidiary
hazard placard.
(b) No person may display an identification number on a placard,
orange panel or white square-on-point display configuration unless--
(1) The identification number is specified for the material in Sec.
172.101;
(2) The identification number is displayed on the placard, orange
panel or white square-on-point configuration authorized by Sec. 172.332
or Sec. 172.336(b), as appropriate, and any placard used for display of
the identification number corresponds to the hazard class of the
material specified in Sec. 172.504;
(3) Except as provided under Sec. 172.336 (c)(4) or (c)(5), the
package, freight container, or transport vehicle on which the number is
displayed contains the hazardous material associated with that
identification number in Sec. 172.101.
(c) Except as required by Sec. 172.332(c)(4) for a combustible
liquid, the identification number of a material may be displayed only on
the placards required by the tables in Sec. 172.504.
(d) Except as provided in Sec. 172.336, a placard bearing an
identification number may not be used to meet the requirements of
subpart F of this part unless it is the correct identification number
for all hazardous materials of the same class in the transport vehicle
or freight container on which it is displayed.
(e) Except as specified in Sec. 172.338, an identification number
may not be displayed on an orange panel on a cargo tank unless affixed
to the cargo tank by the person offering the hazardous material for
transportation in the cargo tank.
(f) If a placard is required by Sec. 172.504, an identification
number may not be displayed on an orange panel unless it is displayed in
proximity to the placard.
(g) No person shall add any color, number, letter, symbol, or word
other than as specified in this subchapter, to any identification number
marking display which is required or authorized by this subchapter.
[Amdt. 172-101, 45 FR 74667, Nov. 10, 1980, as amended by Amdt. 172-104,
51 FR 23078, June 25, 1986; Amdt. 172-110, 52 FR 29528, Aug. 10, 1987;
Amdt. 172-123, 55 FR 52593, Dec. 21, 1990; 56 FR 66255, Dec. 20, 1991;
Amdt. 172-127, 59 FR 49133, Sept. 26, 1994]
Sec. 172.336 Identification numbers; special provisions.
(a) When not required or prohibited by this subpart, identification
numbers may be displayed on a transport vehicle or a freight container
in the manner prescribed by this subpart.
(b) Identification numbers, when required, must be displayed on
either orange panels (see Sec. 172.332(b)) or on a plain white square-
on-point display configuration having the same outside dimensions as a
placard. In addition, for materials in hazard classes for which placards
are specified and identification number displays are required, but for
which identification numbers may not be displayed on the placards
authorized for the material (see Sec. 172.334(a)), identification
numbers must be displayed on orange panels or on the plain white square-
on-point display configuration in association with the required
placards. An identification number displayed on a white square-on-point
display configuration is not considered to be a placard.
[[Page 372]]
(1) The 100 mm (3.9 inch) by 215 mm (8.5 inches) area containing the
identification number shall be located as prescribed by Sec. 172.332
(c)(1) and (c)(2) and may be outlined with a solid or dotted line
border.
(2) [Reserved]
(c) Identification numbers are not required:
(1) On the ends of a portable tank, cargo tank or tank car having
more than one compartment if hazardous materials having different
identification numbers are being transported therein. In such a
circumstance, the identification numbers on the sides of the tank shall
be displayed in the same sequence as the compartments containing the
materials they identify.
(2) On a cargo tank containing only gasoline, if the cargo tank is
marked ``Gasoline'' on each side and rear in letters no less than 50 mm
(2 inches) high, or is placarded in accordance with Sec. 172.542(c).
(3) On a cargo tank containing only fuel oil, if the cargo tank is
marked ``Fuel Oil'' on each side and rear in letters no less than 50 mm
(2 inches) high, or is placarded in accordance with Sec. 172.544(c).
(4) For each of the different liquid petroleum distillate fuels,
including gasoline and gasohol in a compartmented cargo tank or tank
car, if the identification number is displayed for the distillate fuel
having the lowest flash point.
(5) For each of the different liquid petroleum distillate fuels,
including gasoline and gasohol transported in a cargo tank, if the
identification number is displayed for the liquid petroleum distillate
fuel having the lowest flash point.
(6) On nurse tanks meeting the provisions of Sec. 173.315(m) of
this subchapter.
[Amdt. 172-101, 45 FR 74667, Nov. 10, 1980, as amended by Amdt. 172-74,
47 FR 40365, Sept. 30, 1982; Amdt. 172-109, 52 FR 13038, Apr. 20, 1987;
Amdt. 172-110, 52 FR 29528, Aug. 10, 1987; Amdt. 172-123, 55 FR 52593,
Dec. 21, 1990; 56 FR 66255, Dec. 20, 1991; 65 FR 50459, Aug. 18, 2000]
Sec. 172.338 Replacement of identification numbers.
If more than one of the identification number markings on placards,
orange panels, or white square-on-point display configurations that are
required to be displayed are lost, damaged or destroyed during
transportation, the carrier shall replace all the missing or damaged
identification numbers as soon as practicable. However, in such a case,
the numbers may be entered by hand on the appropriate placard, orange
panel or white square-on-point display configuration providing the
correct identification numbers are entered legibly using an indelible
marking material. When entered by hand, the identification numbers must
be located in the white display area specified in Sec. 172.332. This
section does not preclude required compliance with the placarding
requirements of subpart F of this subchapter.
[Amdt. 172-110, 52 FR 29528, Aug. 10, 1987]
Subpart E_Labeling
Sec. 172.400 General labeling requirements.
(a) Except as specified in Sec. 172.400a, each person who offers
for transportation or transports a hazardous material in any of the
following packages or containment devices, shall label the package or
containment device with labels specified for the material in the Sec.
172.101 table and in this subpart:
(1) A non-bulk package;
(2) A bulk packaging, other than a cargo tank, portable tank, or
tank car, with a volumetric capacity of less than 18 m3 (640
cubic feet), unless placarded in accordance with subpart F of this part;
(3) A portable tank of less than 3785 L (1000 gallons) capacity,
unless placarded in accordance with subpart F of this part;
(4) A DOT Specification 106 or 110 multi-unit tank car tank, unless
placarded in accordance with subpart F of this part; and
(5) An overpack, freight container or unit load device, of less than
18 m3 (640 cubic feet), which contains a package for which
labels are required, unless placarded or marked in accordance with Sec.
172.512 of this part.
(b) Labeling is required for a hazardous material which meets one or
[[Page 373]]
more hazard class definitions, in accordance with column 6 of the Sec.
172.101 table and the following table:
------------------------------------------------------------------------
Label
design or
Hazard class or division Label name section
reference
------------------------------------------------------------------------
1.1.............................. EXPLOSIVES 1.1.......... 172.411
1.2.............................. EXPLOSIVES 1.2.......... 172.411
1.3.............................. EXPLOSIVES 1.3.......... 172.411
1.4.............................. EXPLOSIVES 1.4.......... 172.411
1.5.............................. EXPLOSIVES 1.5.......... 172.411
1.6.............................. EXPLOSIVES 1.6.......... 172.411
2.1.............................. FLAMMABLE GAS........... 172.417
2.2.............................. NONFLAMMABLE GAS........ 172.415
2.3.............................. POISON GAS.............. 172.416
3 (flammable liquid) Combustible FLAMMABLE LIQUID (none). 172.419
liquid.
4.1.............................. FLAMMABLE SOLID......... 172.420
4.2.............................. SPONTANEOUSLY 172.422
COMBUSTIBLE.
4.3.............................. DANGEROUS WHEN WET...... 172.423
5.1.............................. OXIDIZER................ 172.426
5.2.............................. ORGANIC PEROXIDE........ 172.427
6.1 (material poisonous by POISON INHALATION HAZARD 172.429
inhalation (see Sec. 171.8 of
this subchapter)).
6.1 (other than material POISON.................. 172.430
poisonous by inhalation).
6.1 (inhalation hazard, Zone A or POISON INHALATION HAZARD 172.429
B).
6.1 (other than inhalation POISON.................. 172.430
hazard, Zone A or B).
6.2.............................. INFECTIOUS SUBSTANCE \1\ 172.432
7 (see Sec. 172.403)........... RADIOACTIVE WHITE-I..... 172.436
7................................ RADIOACTIVE YELLOW-II... 172.438
7................................ RADIOACTIVE YELLOW-III.. 172.440
7 (fissile radioactive material; FISSILE................. 172.441
see Sec. 172.402).
7 (empty packages, see Sec. EMPTY................... 172.450
173.428 of this subchapter).
8................................ CORROSIVE............... 172.442
9................................ CLASS 9................. 172.446
------------------------------------------------------------------------
\1\ The ETIOLOGIC AGENT label specified in regulations of the Department
of Health and Human Services at 42 CFR 72.3 may apply to packages of
infectious substances.
[Amdt. 172-123, 55 FR 52593, Dec. 21, 1990, as amended at 56 FR 66255,
Dec. 20, 1991; Amdt. 172-151, 62 FR 1228, Jan. 8, 1997; 64 FR 10776,
Mar. 5, 1999; 64 FR 51918, Sept. 27, 1999; 69 FR 3668, Jan. 26, 2004; 69
FR 64471, Nov. 4, 2004]
Sec. 172.400a Exceptions from labeling.
(a) Notwithstanding the provisions of Sec. 172.400, a label is not
required on--
(1) A Dewar flask meeting the requirements in Sec. 173.320 of this
subchapter or a cylinder containing a Division 2.1, 2.2, or 2.3 material
that is--
(i) Not overpacked; and
(ii) Durably and legibly marked in accordance with CGA Pamphlet C-7,
Appendix A (IBR; see Sec. 171.7 of this subchapter).
(2) A package or unit of military explosives (including ammunition)
shipped by or on behalf of the DOD when in--
(i) Freight containerload, carload or truckload shipments, if loaded
and unloaded by the shipper or DOD; or
(ii) Unitized or palletized break-bulk shipments by cargo vessel
under charter to DOD if at least one required label is displayed on each
unitized or palletized load.
(3) A package containing a hazardous material other than ammunition
that is--
(i) Loaded and unloaded under the supervision of DOD personnel, and
(ii) Escorted by DOD personnel in a separate vehicle.
(4) A compressed gas cylinder permanently mounted in or on a
transport vehicle.
(5) A freight container, aircraft unit load device or portable tank,
which--
(i) Is placarded in accordance with subpart F of this part, or
(ii) Conforms to paragraph (a)(3) or (b)(3) of Sec. 172.512.
(6) An overpack or unit load device in or on which labels
representative of each hazardous material in the overpack or unit load
device are visible.
[[Page 374]]
(7) A package of low specific activity radioactive material and
surface contaminated objects, when transported under Sec.
173.427(a)(6)(vi) of this subchapter.
(b) Certain exceptions to labeling requirements are provided for
small quantities and limited quantities in applicable sections in part
173 of this subchapter.
(c) Notwithstanding the provisions of Sec. 172.402(a), a subsidiary
hazard label is not required on a package containing a Class 8
(corrosive) material which has a subsidiary hazard of Division 6.1
(poisonous) if the toxicity of the material is based solely on the
corrosive destruction of tissue rather than systemic poisoning.
(d) A package containing a material poisonous by inhalation (see
Sec. 171.8 of this subchapter) in a closed transport vehicle or freight
container may be excepted from the POISON INHALATION HAZARD or POISON
GAS label or placard, under the conditions set forth in Sec. Sec.
171.12 and 171.12a of this subchapter.
[Amdt. 172-123, 55 FR 52594, Dec. 21, 1990, as amended by Amdt. 172-132,
58 FR 50501, Sept. 27, 1993; 172-130, 58 FR 51531, Oct. 1, 1993; Amdt.
172-139, 59 FR 67490, Dec. 29, 1994; Amdt. 172-145, 60 FR 49110, Sept.
21, 1995; 63 FR 52849, Oct. 1, 1998; 64 FR 10776, Mar. 5, 1999; 65 FR
58626, Sept. 29, 2000; 66 FR 44255, Aug. 22, 2001; 68 FR 75742, Dec. 31,
2003; 69 FR 64472, Nov. 4, 2004]
Sec. 172.401 Prohibited labeling.
(a) Except as otherwise provided in this section, no person may
offer for transportation and no carrier may transport a package bearing
a label specified in this subpart unless:
(1) The package contains a material that is a hazardous material,
and
(2) The label represents a hazard of the hazardous material in the
package.
(b) No person may offer for transportation and no carrier may
transport a package bearing any marking or label which by its color,
design, or shape could be confused with or conflict with a label
prescribed by this part.
(c) The restrictions in paragraphs (a) and (b) of this section, do
not apply to packages labeled in conformance with:
(1) The UN Recommendations (IBR, see Sec. 171.7 of this
subchapter);
(2) The IMDG Code (IBR, see Sec. 171.7 of this subchapter);
(3) The ICAO Technical Instructions (IBR, see Sec. 171.7 of this
subchapter);
(4) The TDG Regulations (IBR, see Sec. 171.7 of this subchapter).
(d) The provisions of paragraph (a) of this section do not apply to
a packaging bearing a label if that packaging is:
(1) Unused or cleaned and purged of all residue;
(2) Transported in a transport vehicle or freight container in such
a manner that the packaging is not visible during transportation; and
(3) Loaded by the shipper and unloaded by the shipper or consignee.
[Amdt. 172-9, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 172-75, 47
FR 44471, Oct. 7, 1982; Amdt. 172-77, 47 FR 54822, Dec. 6, 1982; Amdt.
172-94, 49 FR 38134, Sept. 27, 1984; Amdt. 172-100, 50 FR 41521, Oct.
11, 1985; Amdt. 172-123, 55 FR 52594, Dec. 21, 1990; Amdt. 172-132, 58
FR 50501, Sept. 27, 1993; 66 FR 8647, Feb. 1, 2001; 66 FR 45379, Aug.
28, 2001; 68 FR 75741, 75742, Dec. 31, 2003]
Sec. 172.402 Additional labeling requirements.
(a) Subsidiary hazard labels. Each package containing a hazardous
material--
(1) Shall be labeled with primary and subsidiary hazard labels as
specified in column 6 of the Sec. 172.101 table (unless excepted in
paragraph (a)(2) of this section); and
(2)For other than Class 1 or Class 2 materials (for subsidiary
labeling requirements for Class 1 or Class 2 materials see paragraph (e)
or paragraphs (f) and (g), respectively, of this section), if not
already labeled under paragraph (a)(1) of this section, shall be labeled
with subsidiary hazard labels in accordance with the following table:
Subsidiary Hazard Labels
------------------------------------------------------------------------
Subsidiary Hazard (Class or Division)
Subsidiary hazard level -----------------------------------------
(packing group) 3 4.1 4.2 4.3 5.1 6.1 8
------------------------------------------------------------------------
I............................. X *** *** X X X X
II............................ X X X X X X X
III........................... * X X X X X X
------------------------------------------------------------------------
X--Required for all modes.
*--Required for all modes, except for a material with a flash point at
or above 38 [deg]C (100 [deg]F) transported by rail or highway.
**--Reserved
***--Impossible as subsidiary hazard.
[[Page 375]]
(b) Display of hazard class on labels. The appropriate hazard class
or division number must be displayed in the lower corner of a primary
hazard label and a subsidiary hazard label. A subsidiary label meeting
the specifications of this section which were in effect on September 30,
2001, such as, a label without the hazard class or division number
displayed in the lower corner of the label) may continue to be used as a
subsidiary label in domestic transportation by rail or highway until
October 1, 2005, provided the color tolerances are maintained and are in
accordance with the display requirements in this subchapter.
(c) Cargo Aircraft Only label. Each person who offers for
transportation or transports by aircraft a package containing a
hazardous material which is authorized on cargo aircraft only shall
label the package with a CARGO AIRCRAFT ONLY label specified in Sec.
172.448 of this subpart.
(d) Class 7 (Radioactive) Materials. Except as otherwise provided in
this paragraph, each package containing a Class 7 material that also
meets the definition of one or more additional hazard classes must be
labeled as a Class 7 material as required by Sec. 172.403 and for each
additional hazard.
(1) For a package containing a Class 7 material that also meets the
definition of one or more additional hazard classes, whether or not the
material satisfies Sec. 173.4(a)(1)(iv) of this subchapter, a
subsidiary label is not required on the package if the material conforms
to the remaining criteria in Sec. 173.4 of this subchapter.
(2) Each package or overpack containing fissile material, other than
fissile-excepted material (see Sec. 173.453 of this subchapter) must
bear two FISSILE labels, affixed to opposite sides of the package or
overpack, which conforms to the figure shown in Sec. 172.441; such
labels, where applicable, must be affixed adjacent to the labels for
radioactive materials.
(e) Class 1 (explosive) Materials. In addition to the label
specified in column 6 of the Sec. 172.101 table, each package of Class
1 material that also meets the definition for:
(1) Division 6.1, Packing Groups I or II, shall be labeled POISON or
POISON INHALATION HAZARD, as appropriate.
(2) Class 7, shall be labeled in accordance with Sec. 172.403 of
this subpart.
(f) Division 2.2 materials. In addition to the label specified in
column 6 of the Sec. 172.101 table, each package of Division 2.2
material that also meets the definition for an oxidizing gas (see Sec.
171.8 of this subchapter) must be labeled OXIDIZER.
(g) Division 2.3 materials. In addition to the label specified in
column 6 of the Sec. 172.101 table, each package of Division 2.3
material that also meets the definition for:
(1) Division 2.1, must be labeled Flammable Gas;
(2) Division 5.1, must be labeled Oxidizer; and
(3) Class 8, must be labeled Corrosive.
[Amdt. 172-123, 55 FR 52594, Dec. 21, 1990, as amended at 56 FR 66255,
Dec. 20, 1991; Amdt. 172-139, 59 FR 67490, Dec. 29, 1994; Amdt. 172-140,
60 FR 26805, May 18, 1995; Amdt. 172-149, 61 FR 27173, May 30, 1996; 62
FR 39405, July 22, 1997; 66 FR 33425, June 21, 2001; 69 FR 3668, Jan.
26, 2004]
Sec. 172.403 Class 7 (radioactive) material.
(a) Unless excepted from labeling by Sec. Sec. 173.421 through
173.427 of this subchapter, each package of radioactive material must be
labeled as provided in this section.
(b) The proper label to affix to a package of Class 7 (radioactive)
material is based on the radiation level at the surface of the package
and the transport index. The proper category of label must be determined
in accordance with paragraph (c) of this section. The label to be
applied must be the highest category required for any of the two
determining conditions for the package. RADIOACTIVE WHITE-I is the
lowest category and RADIOACTIVE YELLOW-III is the highest. For example,
a package with a transport index of 0.8 and a maximum surface radiation
level of 0.6 millisievert (60 millirems) per hour must bear a
RADIOACTIVE YELLOW-III label.
(c) Category of label to be applied to Class 7 (radioactive)
materials packages:
[[Page 376]]
------------------------------------------------------------------------
Maximum radiation
level at any point
Transport index on the external Label category1
surface
------------------------------------------------------------------------
02............................ Less than or equal WHITE-I.
to 0.005 mSv/h
(0.5 mrem/h).
More than 0 but not more than Greater than 0.005 YELLOW-II.
1. mSv/h (0.5 mrem/h)
but less than or
equal to 0.5 mSv/h
(50 mrem/h).
More than 1 but not more than Greater than 0.5 YELLOW-III.
10. mSv/h (50 mrem/h)
but less than or
equal to 2 mSv/h
(200 mrem/h).
More than 10.................. Greater than 2 mSv/ YELLOW-III (Must be
h (200 mrem/h) but shipped under
less than or equal exclusive use
to 10 mSv/h (1,000 provisions; see
mrem/h). 173.441(b) of this
subchapter).
------------------------------------------------------------------------
\1\ Any package containing a ``highway route controlled quantity'' (Sec.
173.403 of this subchapter) must be labelled as RADIOACTIVE YELLOW-
III.
\2\ If the measured TI is not greater than 0.05, the value may be
considered to be zero.
(d) EMPTY label. See Sec. 173.428(d) of this subchapter for EMPTY
labeling requirements.
(e) FISSILE label. For packages required in Sec. 172.402 to bear a
FISSILE label, each such label must be completed with the criticality
safety index (CSI) assigned in the NRC or DOE package design approval,
or in the certificate of approval for special arrangement or the
certificate of approval for the package design issued by the Competent
Authority for import and export shipments. For overpacks and freight
containers required in Sec. 172.402 to bear a FISSILE label, the CSI on
the label must be the sum of the CSIs for all of the packages contained
in the overpack or freight container.
(f) Each package required by this section to be labeled with a
RADIOACTIVE label must have two of these labels, affixed to opposite
sides of the package. (See Sec. 172.406(e)(3) for freight container
label requirements).
(g) The following applicable items of information must be entered in
the blank spaces on the RADIOACTIVE label by legible printing (manual or
mechanical), using a durable weather resistant means of marking:
(1) Contents. Except for LSA-1 material, the names of the
radionuclides as taken from the listing of radionuclides in Sec.
173.435 of this subchapter (symbols which conform to established
radiation protection terminology are authorized, i.e., \99\Mo, \60\Co,
etc.). For mixtures of radionuclides, with consideration of space
available on the label, the radionuclides that must be shown must be
determined in accordance with Sec. 173.433(g) of this subchapter. For
LSA-I material, the term ``LSA-I'' may be used in place of the names of
the radionuclides.
(2) Activity. The activity in the package must be expressed in
appropriate SI units (e.g., Becquerels (Bq), Terabecquerels (TBq),
etc.). The activity may also be stated in appropriate customary units
(Curies (Ci), milliCuries (mCi), microCuries (uCi), etc.) in parentheses
following the SI units. Abbreviations are authorized. Except for
plutonium-239 and plutonium-241, the weight in grams or kilograms of
fissile radionuclides may be inserted instead of activity units. For
plutonium-239 and plutonium-241, the weight in grams of fissile
radionuclides may be inserted in addition to the activity units.
(3) Transport index. (see Sec. 173.403 of this subchapter.)
(h) When one or more packages of Class 7 (radioactive) material are
placed within an overpack, the overpack must be labeled as prescribed in
this section, except as follows:
(1) The ``contents'' entry on the label may state ``mixed'' in place
of the names of the radionuclides unless each inside package contains
the same radionuclide(s).
(2) The ``activity'' entry on the label must be determined by adding
together the number of becquerels of the Class 7 (radioactive) materials
packages contained therein.
(3) For an overpack, the transport index (TI) must be determined by
adding together the transport indices of the Class 7 (radioactive)
materials packages contained therein, except that for a rigid overpack,
the transport
[[Page 377]]
index (TI) may alternatively be determined by direct measurement as
prescribed in Sec. 173.403 of this subchapter under the definition for
``transport index,'' taken by the person initially offering the packages
contained within the overpack for shipment.
(4) The category of Class 7 label for the overpack must be
determined from the table in Sec. 172.403(c) using the TI derived
according to paragraph (h)(3) of this section, and the maximum radiation
level on the surface of the overpack.
(5) The category of the Class 7 label of the overpack, and not that
of any of the packages contained therein, must be used in accordance
with Table 1 of Sec. 172.504(e) to determine when the transport vehicle
must be placarded.
(6) For fissile material, the criticality safety index which must be
entered on the overpack FISSILE label is the sum of the criticality
safety indices of the individual packages in the overpack, as stated in
the certificate of approval for the package design issued by the NRC or
the U.S. Competent Authority.
[Amdt. 172-29, 41 FR 15996, Apr. 15, 1976]
Editorial Note: For Federal Register citations affecting Sec.
172.403, see the List of CFR Sections Affected which appears in the
Finding Aids section of the printed volume and on GPO Access.
Sec. 172.404 Labels for mixed and consolidated packaging.
(a) Mixed packaging. When hazardous materials having different
hazard classes are packed within the same packaging, or within the same
outside container or overpack as described in Sec. 173.25 and
authorized by Sec. 173.21 of this subchapter, the packaging, outside
container or overpack must be labeled as required for each class of
hazardous material contained therein.
(b) Consolidated packaging. When two or more packages containing
compatible hazardous material (see Sec. 173.21 of this subchapter) are
placed within the same outside container or overpack, the outside
container or overpack must be labeled as required for each class of
hazardous material contained therein.
Sec. 172.405 Authorized label modifications.
(a) For Classes 1, 2, 3, 4, 5, 6, and 8, text indicating a hazard
(for example FLAMMABLE LIQUID) is not required on a primary or
subsidiary label.
(b) For a package containing Oxygen, compressed, or Oxygen,
refrigerated liquid, the OXIDIZER label specified in Sec. 172.426 of
this subpart, modified to display the word ``OXYGEN'' instead of
``OXIDIZER'', and the class number ``2'' instead of ``5.1'', may be used
in place of the NON-FLAMMABLE GAS and OXIDIZER labels. Notwithstanding
the provisions of paragraph (a) of this section, the word ``OXYGEN''
must appear on the label.
(c) For a package containing a Division 6.1, Packing Group III
material, the POISON label specified in Sec. 172.430 may be modified to
display the text ``PG III'' instead of ``POISON'' or ``TOXIC'' below the
mid line of the label. Also see Sec. 172.313(d).
[Amdt. 172-123, 55 FR 52594, Dec. 21, 1990, as amended at 56 FR 66255,
Dec. 20, 1991; 57 FR 45458, Oct. 1, 1992; 64 FR 10776, Mar. 5, 1999; 66
FR 33425, June 21, 2001]
Sec. 172.406 Placement of labels.
(a) General. (1) Except as provided in paragraphs (b) and (e) of
this section, each label required by this subpart must--
(i) Be printed on or affixed to a surface (other than the bottom) of
the package or containment device containing the hazardous material; and
(ii) Be located on the same surface of the package and near the
proper shipping name marking, if the package dimensions are adequate.
(2) Except as provided in paragraph (e) of this section, duplicate
labeling is not required on a package or containment device (such as to
satisfy redundant labeling requirements).
(b) Exceptions. A label may be printed on or placed on a securely
affixed tag, or may be affixed by other suitable means to:
(1) A package that contains no radioactive material and which has
dimensions less than those of the required label;
(2) A cylinder; and
[[Page 378]]
(3) A package which has such an irregular surface that a label
cannot be satisfactorily affixed.
(c) Placement of multiple labels. When primary and subsidiary hazard
labels are required, they must be displayed next to each other.
Placement conforms to this requirement if labels are within 150 mm (6
inches) of one another.
(d) Contrast with background. Each label must be printed on or
affixed to a background of contrasting color, or must have a dotted or
solid line outer border.
(e) Duplicate labeling. Generally, only one of each different
required label must be displayed on a package. However, duplicate labels
must be displayed on at least two sides or two ends (other than the
bottom) of--
(1) Each package or overpack having a volume of 1.8 m \3\ (64 cubic
feet) or more;
(2) Each non-bulk package containing a radioactive material;
(3) Each DOT 106 or 110 multi-unit tank car tank. Labels must be
displayed on each end;
(4) Each portable tank of less than 3,785 L (1000 gallons) capacity;
and
(5) Each freight container or aircraft unit load device having a
volume of 1.8 m \3\ (64 cubic feet) or more, but less than 18 m \3\ (640
cubic feet). One of each required label must be displayed on or near the
closure.
(f) Visibility. A label must be clearly visible and may not be
obscured by markings or attachments.
[Amdt. 172-123, 55 FR 52594, Dec. 21, 1990, as amended at 56 FR 66255,
Dec. 20, 1991; Amdt. 172-130, 58 FR 51531, Oct. 1, 1993]
Sec. 172.407 Label specifications.
(a) Durability. Each label, whether printed on or affixed to a
package, must be durable and weather resistant. A label on a package
must be able to withstand, without deterioration or a substantial change
in color, a 30-day exposure to conditions incident to transportation
that reasonably could be expected to be encountered by the labeled
package.
(b) Design. (1) Except for size and color, the printing, inner
border, and symbol on each label must be as shown in Sec. Sec. 172.411
through 172.448 of this subpart, as appropriate.
(2) The dotted line border shown on each label is not part of the
label specification, except when used as an alternative for the solid
line outer border to meet the requirements of Sec. 172.406(d) of this
subpart.
(c) Size. (1) Each diamond (square-on-point) label prescribed in
this subpart must be at least 100 mm (3.9 inches) on each side with each
side having a solid line inner border 5.0 to 6.3 mm (0.2 to 0.25 inches)
from the edge.
(2) The CARGO AIRCRAFT ONLY label must be a rectangle measuring at
least 110 mm (4.3 inches) in height by 120 mm (4.7 inches) in width. The
word ``DANGER'' must be shown in letters measuring at least 12.7 mm (0.5
inches) in height.
(3) Except as otherwise provided in this subpart, the hazard class
number, or division number, as appropriate, must be at least 6.3 mm
(0.25 inches) and not greater than 12.7 mm (0.5 inches).
(4) When text indicating a hazard is displayed on a label, the label
name must be shown in letters measuring at least 7.6 mm (0.3 inches) in
height. For SPONTANEOUSLY COMBUSTIBLE or DANGEROUS WHEN WET labels, the
words ``Spontaneously'' and ``When Wet'' must be shown in letters
measuring at least 5.1 mm (0.2 inches) in height.
(5) The symbol on each label must be proportionate in size to that
shown in the appropriate section of this subpart.
(d) Color. (1) The background color on each label must be as
prescribed in Sec. Sec. 172.411 through 172.448 of this subpart, as
appropriate.
(2) The symbol, text, numbers, and border must be shown in black on
a label except that--
(i) White may be used on a label with a one color background of
green, red or blue; and
(ii) White must be used for the text and class number for the
CORROSIVE label.
(3) Black and any color on a label must be able to withstand,
without substantial change, a 72-hour fadeometer test (for a description
of equipment designed for this purpose,
[[Page 379]]
see ASTM G 23-69 (1975) or ASTM G 26-70).
(4) (i) A color on a label, upon visual examination, must fall
within the color tolerances--
(A) Displayed on color charts conforming to the technical
specifications for charts set forth in table 1 or 2 in appendix A to
this part; or
(B) For labels printed on packaging surfaces, specified in table 3
in appendix A to this part.
(ii) Color charts conforming to appendix A to this part are on
display in Office of Hazardous Materials Safety, Office of Hazardous
Materials Standards, Room 8422, Nassif Building, 400 Seventh Street,
SW., Washington DC 20590-0001.
(5) The following color standards in the PANTONE[reg] formula guide
coated/uncoated (see Sec. 171.7(b) of this subchapter) may be used to
achieve the required colors on markings and hazard warning labels and
placards:
(i) For Red--Use PANTONE[reg] 186 U
(ii) For Orange--Use PANTONE[reg] 151 U
(iii) For Yellow--Use PANTONE[reg] 109 U
(iv) For Green--Use PANTONE[reg] 335 U
(v) For Blue--Use PANTONE[reg] 285 U
(vi) For Purple--Use PANTONE[reg] 259 U
(6) Where specific colors from the PANTONE MATCHING SYSTEM[reg] are
applied as opaque coatings, such as paint, enamel, or plastic, or where
labels are printed directly on the surface of a packaging, a
spectrophotometer or other instrumentation must be used to ensure a
proper match with the color standards in the PANTONE[reg] formula guide
coated/uncoated for colors prescribed in paragraph (d)(5) of this
section. PANTONE[reg] is the property of Pantone, Inc.
(7) The specified label color must extend to the edge of the label
in the area designated on each label, except for the CORROSIVE,
RADIOACTIVE YELLOW-II, and RADIOACTIVE YELLOW-III labels on which the
color must extend only to the inner border.
(e) Form identification. A label may contain form identification
information, including the name of its maker, provided that information
is printed outside the solid line inner border in no larger than 10-
point type.
(f) Exceptions. Except for materials poisonous by inhalation (See
Sec. 171.8 of this subchapter), a label conforming to specifications in
the UN Recommendations may be used in place of a corresponding label
that conforms to the requirements of this subpart.
(g) Trefoil symbol. The trefoil symbol on the RADIOACTIVE WHITE-I,
RADIOACTIVE YELLOW-II, and RADIOACTIVE YELLOW-III labels must meet the
appropriate specifications in appendix B of this part.
[Amdt. 172-123, 55 FR 52595, Dec. 21, 1990, as amended at 56 FR 66256,
Dec. 20, 1991; Amdt. 172-143, 60 FR 50305, Sept. 28, 1995; 64 FR 10776,
Mar. 5, 1999; 66 FR 8647, Feb. 1, 2001; 66 FR 44255, Aug. 22, 2001; 67
FR 61013, Sept. 27, 2002; 69 FR 64472, Nov. 4, 2004]
Sec. 172.411 EXPLOSIVE 1.1, 1.2, 1.3, 1.4, 1.5 and 1.6 labels, and
EXPLOSIVE Subsidiary label.
(a) Except for size and color, the EXPLOSIVE 1.1, EXPLOSIVE 1.2 and
EXPLOSIVE 1.3 labels must be as follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.015
(b) In addition to complying with Sec. 172.407, the background
color on the EXPLOSIVE 1.1, EXPLOSIVE 1.2 and EXPLOSIVE 1.3 labels must
be orange. The ``**'' must be replaced with the appropriate division
number and compatibility group letter. The compatibility group letter
must be the same size as the division number and must be shown as a
capitalized Roman letter.
[[Page 380]]
(c) Except for size and color, the EXPLOSIVE 1.4, EXPLOSIVE 1.5 and
EXPLOSIVE 1.6 labels must be as follows:
EXPLOSIVE 1.4:
[GRAPHIC] [TIFF OMITTED] TC02MR91.016
EXPLOSIVE 1.5:
[GRAPHIC] [TIFF OMITTED] TC02MR91.017
EXPLOSIVE 1.6:
[GRAPHIC] [TIFF OMITTED] TC02MR91.018
(d) In addition to complying with Sec. 172.407, the background
color on the EXPLOSIVE 1.4, EXPLOSIVE 1.5 and EXPLOSIVE 1.6 label must
be orange. The ``*'' must be replaced with the appropriate compatibility
group. The compatibility group letter must be shown as a capitalized
Roman letter. Division numbers must measure at least 30 mm (1.2 inches)
in height and at least 5 mm (0.2 inches) in width.
(e) An EXPLOSIVE subsidiary label is required for materials
identified in Column (6) of the HMT as having an explosive subsidiary
hazard. The division number or compability group letter may be displayed
on the subsidiary hazard label. Except for size and color, the EXPLOSIVE
subsidiary label must be as follows:
[[Page 381]]
[GRAPHIC] [TIFF OMITTED] TR31JY03.002
(f) The EXPLOSIVE subsidiary label must comply with Sec. 172.407.
[Amdt. 172-123, 56 FR 66256, Dec. 20, 1991, as amended by Amdt. 172-139,
59 FR 67490, Dec. 29, 1994; 66 FR 33425, June 21, 2001; 68 FR 45031,
July 31, 2003]
Sec. 172.415 NON-FLAMMABLE GAS label.
(a) Except for size and color, the NON-FLAMMABLE GAS label must be
as follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.020
(b) In addition to complying with Sec. 172.407, the background
color on the NON-FLAMMABLE GAS label must be green.
[Amdt. 172-123, 56 66256, Dec. 20, 1991]
Sec. 172.416 POISON GAS label.
(a) Except for size and color, the POISON GAS label must be as
follows:
[GRAPHIC] [TIFF OMITTED] TR22JY97.022
(b) In addition to complying with Sec. 172.407, the background on
the POISON GAS label and the symbol must be white. The background of the
upper diamond must be black and the lower point of the upper diamond
must be 14 mm (0.54 inches) above the horizontal center line.
[62 FR 39405, July 22, 1997]
Sec. 172.417 FLAMMABLE GAS label.
(a) Except for size and color, the FLAMMABLE GAS label must be as
follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.022
[[Page 382]]
(b) In addition to complying with Sec. 172.407, the background
color on the FLAMMABLE GAS label must be red.
[Amdt. 172-123, 56 FR 66257, Dec. 20, 1991]
Sec. 172.419 FLAMMABLE LIQUID label.
(a) Except for size and color the FLAMMABLE LIQUID label must be as
follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.023
(b) In addition to complying with Sec. 172.407, the background
color on the FLAMMABLE LIQUID label must be red.
[Amdt. 172-123, 56 FR 66257, Dec. 20, 1991]
Sec. 172.420 FLAMMABLE SOLID label.
(a) Except for size and color, the FLAMMABLE SOLID label must be as
follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.024
(b) In addition to complying with Sec. 172.407, the background on
the FLAMMABLE SOLID label must be white with vertical red stripes
equally spaced on each side of a red stripe placed in the center of the
label. The red vertical stripes must be spaced so that, visually, they
appear equal in width to the white spaces between them. The symbol
(flame) and text (when used) must be overprinted. The text ``FLAMMABLE
SOLID'' may be placed in a white rectangle.
[Amdt. 172-123, 56 FR 66257, Dec. 20, 1991]
Sec. 172.422 SPONTANEOUSLY COMBUSTIBLE label.
(a) Except for size and color, the SPONTANEOUSLY COMBUSTIBLE label
must be as follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.025
(b) In addition to complying with Sec. 172.407, the background
color on the lower half of the SPONTANEOUSLY COMBUSTIBLE label must be
red and the upper half must be white.
[Amdt. 172-123, 56 FR 66257, Dec. 20, 1991, as amended at 57 FR 45458,
Oct. 1, 1992]
Sec. 172.423 DANGEROUS WHEN WET label.
(a) Except for size and color, the DANGEROUS WHEN WET label must be
as follows:
[[Page 383]]
[GRAPHIC] [TIFF OMITTED] TC02MR91.026
(b) In addition to complying with Sec. 172.407, the background
color on the DANGEROUS WHEN WET label must be blue.
[Amdt. 172-123, 56 FR 66257, Dec. 20, 1991]
Sec. 172.426 OXIDIZER label.
(a) Except for size and color, the OXIDIZER label must be as
follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.027
(b) In addition to complying with Sec. 172.407, the background
color on the OXIDIZER label must be yellow.
[Amdt. 172-123, 56 FR 66257, Dec. 20, 1991]
Sec. 172.427 ORGANIC PEROXIDE label.
(a) Except for size and color, the ORGANIC PEROXIDE label must be as
follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.028
(b) In addition to complying with Sec. 172.407, the background
color on the ORGANIC PEROXIDE label must be yellow.
[Amdt. 172-123, 56 FR 66258, Dec. 20, 1991]
Sec. 172.429 POISON INHALATION HAZARD label.
(a) Except for size and color, the POISON INHALATION HAZARD label
must be as follows:
[GRAPHIC] [TIFF OMITTED] TR22JY97.023
(b) In addition to complying with Sec. 172.407, the background on
the POISON INHALATION HAZARD label and the symbol must be white. The
background of the upper diamond must be black and the lower point of the
upper diamond must be 14 mm (0.54 inches) above the horizontal center
line.
[62 FR 39406, July 22, 1997]
[[Page 384]]
Sec. 172.430 POISON label.
(a) Except for size and color, the POISON label must be as follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.029
(b) In addition to complying with Sec. 172.407, the background on
the POISON label must be white. The word ``TOXIC'' may be used in lieu
of the word ``POISON''.
[Amdt. 172-123, 56 FR 66258, Dec. 20, 1991, as amended by Amdt. 172-139,
59 FR 67490, Dec. 29, 1994]
Sec. 172.431 [Reserved]
Sec. 172.432 INFECTIOUS SUBSTANCE label.
(a) Except for size and color, the INFECTIOUS SUBSTANCE label must
be as follows:
[[Page 385]]
[GRAPHIC] [TIFF OMITTED] TR14AU02.006
(b) In addition to complying with Sec. 172.407, the background on
the INFECTIOUS SUBSTANCE label must be white.
[Amdt. 172-123, 56 FR 66258, Dec. 20, 1991, as amended at 67 FR 53136,
Aug. 14, 2002]
Sec. 172.436 RADIOACTIVE WHITE-I label.
(a) Except for size and color, the RADIOACTIVE WHITE-I label must be
as follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.032
[[Page 386]]
(b) In addition to complying with Sec. 172.407, the background on
the RADIOACTIVE WHITE-I label must be white. The printing and symbol
must be black, except for the ``I'' which must be red.
[Amdt. 172-123, 56 FR 66259, Dec. 20, 1991]
Sec. 172.438 RADIOACTIVE YELLOW-II label.
(a) Except for size and color, the RADIOACTIVE YELLOW-II must be as
follows:
[GRAPHIC] [TIFF OMITTED] TC02MR91.033
(b) In addition to complying with Sec. 172.407, the background
color on the RADIOACTIVE YELLOW-II label must be yellow in the top half
and white in the lower half. The printing and symbol must be black,
except for the ``II'' which must be red.
[Amdt. 172-123, 56 FR 66259, Dec. 20, 1991]