This subpart implements the duty preference and related customs provisions applicable to imported goods under the United States-Singapore Free Trade Agreement (the SFTA) signed on May 6, 2003, and under the United States-Singapore Free Trade Agreement Implementation Act (the Act; 117 Stat. 948). Except as otherwise specified in this subpart, the procedures and other requirements set forth in this subpart are in addition to the customs procedures and requirements of general application contained elsewhere in this chapter. Additional provisions implementing certain aspects of the SFTA and the Act are contained in parts 24, 162, and 163 of this chapter.
As used in this subpart, the following terms will have the meanings indicated unless either the context in which they are used requires a different meaning or a different definition is prescribed for a particular section of this subpart:
(a)
(b)
(1) Charge equivalent to an internal tax imposed consistently with Article III:2 of GATT 1994 in respect of the like domestic good or in respect of goods from which the imported good has been manufactured or produced in whole or in part;
(2) Antidumping or countervailing duty that is applied pursuant to a Party's domestic law;
(3) Fee or other charge in connection with importation commensurate with the cost of services rendered; or
(4) Duty imposed pursuant to Article 5 of the WTO Agreement on Agriculture.
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(1) Fuel and energy;
(2) Tools, dies, and molds;
(3) Spare parts and materials used in the maintenance of equipment and buildings;
(4) Lubricants, greases, compounding materials, and other materials used in production or used to operate equipment and buildings;
(5) Gloves, glasses, footwear, clothing, safety equipment, and supplies;
(6) Equipment, devices, and supplies used for testing or inspecting the good;
(7) Catalysts and solvents; and
(8) Any other goods that are not incorporated into the good but whose use in the production of the good can reasonably be demonstrated to be a part of that production;
(k)
(l)
(m)
(n)
(o)
(p)
(q)
(r)
(1) With respect to Singapore, its land territory, internal waters and territorial sea as well as the maritime zones beyond the territorial sea, including the seabed and subsoil over which the Republic of Singapore exercises sovereign rights or jurisdiction under its national laws and international law for the purpose of exploration and exploitation of the natural resources of such areas; and
(2) With respect to the United States;
(i) The customs territory of the United States, which includes the 50 states, the District of Columbia, and Puerto Rico;
(ii) The foreign trade zones located in the United States and Puerto Rico; and
(iii) Any areas beyond the territorial seas of the United States within which, in accordance with international law and its domestic law, the United States may exercise rights with respect to the seabed and subsoil and their natural resources; and
(s)
(a)
(b)
(a)
(1) Need not be in a prescribed format but must be in writing or must be transmitted electronically pursuant to any electronic means authorized by CBP for that purpose;
(2) Must include the following information:
(i) The legal name, address, telephone, and e-mail address (if any) of the importer of record of the good;
(ii) The legal name, address, telephone, and e-mail address (if any) of the responsible official or authorized agent of the importer signing the supporting statement (if different from the information required by paragraph (a)(2)(i) of this section);
(iii) The legal name, address, telephone, and e-mail address (if any) of the exporter of the good (if different from the producer);
(iv) The legal name, address, telephone, and e-mail address (if any) of the producer of the good (if known);
(v) A description of the good for which preferential tariff treatment is claimed, which must be sufficiently detailed to relate it to the invoice and the HS nomenclature;
(vi) The HTSUS tariff classification, to six or more digits, as necessary for the specific change in tariff classification rule for the good set forth in General Note 25(o), HTSUS;
(vii) The applicable rule of origin set forth in General Note 25, HTSUS, under which the good qualifies as an originating good; and
(3) Must include a statement, in substantially the following form:
I certify that:
The information on this document is true and accurate and I assume the responsibility for proving such representations. I understand that I am liable for any false statements or material omissions made on or in connection with this document;
I agree to maintain and present upon request, documentation necessary to support these representations;
The goods originated or are considered to have originated in the territory of one or more of the Parties, and comply with the origin requirements specified for those goods in the United States-Singapore Free Trade Agreement; there has been no further production or any other operation outside the territories of the parties, other than unloading, reloading, or any other operation necessary to preserve the goods in good condition or to transport the goods to the United States; and
This document consists of ___ pages, including all attachments.”
(b)
(c)
(d)
(1) A single importation of a good into the United States, including a single shipment that results in the filing of one or more entries and a series of shipments that results in the filing of one entry; or
(2) Multiple importations of identical goods into the United States that occur within a specified blanket period, not exceeding 12 months, set out in the statement. For purposes of this paragraph, “identical goods” means goods that are the same in all respects relevant to the particular rule of origin that qualifies the goods as originating.
(a)
(b)
(1) Must have records that explain how the importer came to the conclusion that the good qualifies for preferential tariff treatment. Those records must include documents that support a claim that the article in question qualifies for preferential tariff treatment because it meets the applicable rules of origin set forth in General Note 25, HTSUS, and in this subpart. Those records may include a properly completed importer's supporting statement as set forth in § 10.511 of this subpart; and
(2) May be required to present evidence that the conditions set forth in § 10.542 of this subpart were met if the imported article was shipped through an intermediate country.
(c)
(a)
(1) A non-commercial importation of a good; or
(2) A commercial importation for which the value of the goods does not exceed U.S. $2,500.
(b)
(a)
(1) The purchase of, cost of, value of, and payment for, the good;
(2) Where appropriate, the purchase of, cost of, value of, and payment for, all materials, including recovered goods and indirect materials, used in the production of the good; and
(3) Where appropriate, the production of the good in the form in which the good was exported.
(b)
(c)
(a)
(b)
A cotton or man-made fiber apparel good described in § 10.521 of this subpart that does not qualify as an originating good under § 10.531 of this subpart may nevertheless be entitled to preferential tariff treatment under the SFTA under an applicable tariff preference level (TPL). To make a TPL claim, the importer must include on the entry summary, or equivalent documentation, the applicable tariff item in Chapter 99 of the HTSUS (9910.61.01 through 9910.61.89) and the applicable subheading in Chapter 61 or 62 of the HTSUS under which each non-originating cotton or man-made fiber apparel good is classified. For TPL goods, the letters “SG” must be inserted as a prefix to the applicable HTSUS 9910 tariff item when the entry is filed. The importer must also submit a certificate of eligibility as set forth in § 10.522 of this subpart.
Goods eligible for a TPL claim consist of cotton or man-made fiber apparel goods provided for in Chapters 61 and 62 of the HTSUS that are both cut (or knit-to-shape) and sewn or otherwise assembled in Singapore from fabric or yarn produced or obtained outside the territory of Singapore or the United States, and that meet the applicable conditions for preferential tariff treatment under the SFTA, other than the condition that they are originating goods. The preferential tariff treatment is limited to the quantities specified in U.S. Note 13, Subchapter X, Chapter 99, HTSUS.
An importer who claims preferential tariff treatment on a non-originating cotton or man-made fiber apparel good must submit a certificate of eligibility issued by the Government of Singapore, demonstrating that the good is eligible for entry under the applicable TPL, as set forth in § 10.521 of this subpart.
For purposes of §§ 10.530 through 10.542:
(a)
(1) Any costs, charges, or expenses incurred for transportation, insurance and related services incident to the international shipment of the merchandise from the country of exportation to the place of importation; and
(2) The value of packing materials and containers for shipment as defined in paragraph (j) of this section;
(b)
(c)
(d)
(e)
(f)
(1) Mineral goods extracted in the territory of one or both of the Parties;
(2) Vegetable goods, as such goods are defined in the Harmonized System, harvested in the territory of one or both of the Parties;
(3) Live animals born and raised in the territory of one or both of the Parties;
(4) Goods obtained from hunting, trapping, fishing, or aquaculture conducted in the territory of one or both of the Parties;
(5) Goods (fish, shellfish and other marine life) taken from the sea by vessels registered or recorded with a Party and flying its flag;
(6) Goods produced exclusively from products referred to in subparagraph (f)(5) of this section on board factory ships registered or recorded with a Party and flying its flag;
(7) Goods taken by a Party or a person of a Party from the seabed or beneath the seabed outside territorial waters, provided that a Party has rights to exploit such seabed;
(8) Goods taken from outer space, provided they are obtained by a Party or a person of a Party and not processed in the territory of a non-Party;
(9) Waste and scrap derived from:
(i) Production in the territory of one or both of the Parties; or
(ii) Used goods collected in the territory of one or both of the Parties, provided such goods are fit only for the recovery of raw materials;
(10) Recovered goods derived in the territory of one or both of the Parties from used goods; or
(11) Goods produced in one or both of the Parties exclusively from goods referred to in paragraphs (f)(1) through (f)(9) of this section or from the derivatives of such goods;
(g)
(h)
(i)
(j)
(k)
(l)
(m)
(1) The complete disassembly of used goods into individual parts; and
(2) The cleaning, inspecting, testing, or other processing of those parts as necessary for improvement to sound working condition by one or more of the following processes: Welding, flame spraying, surface machining, knurling, plating, sleeving, and rewinding, in order for such parts to be assembled with other parts, including other recovered parts, in the production of a remanufactured good as defined in paragraph (o) of this section;
(n)
(o)
(1) Is entirely or partially comprised of recovered goods;
(2) Has the same life expectancy and meets the same performance standards as a new good; and
(3) Enjoys the same factory warranty as such a new good;
(p)
(q)
Except as provided in § 10.543 of this subpart, a good imported into the customs territory of the United States will be considered an originating good under the SFTA only if:
(a) The good is wholly obtained or produced entirely in the territory of one or both of the Parties;
(b) The good is transformed in one or both of the Parties so that:
(1) Each non-originating material undergoes an applicable change in tariff classification specified in General Note 25(o), HTSUS, as a result of production occurring entirely in the territory of one or both of the Parties; and
(2) The good otherwise satisfies any applicable regional value content or other requirements specified in General Note 25(o), HTSUS; or
(c) The good, in its condition as imported into the United States, is enumerated as an Integrated Sourcing Initiative good in General Note 25(m), HTSUS, and is imported from the territory of Singapore.
(a) For purposes of General Note 25(b)(ii), HTSUS, a good is eligible for treatment as an originating good under the Integrated Sourcing Initiative if:
(1) The good, in its condition as imported, is both classified in a tariff provision enumerated in the first column of General Note 25(m), HTSUS, and described opposite that tariff provision in the list of information technology articles set forth in the second column of General Note 25(m), HTSUS;
(2) The good, regardless of its origin, is imported into the territory of the United States from the territory of Singapore. If a product of a non-Party, the good must have been imported into Singapore prior to its importation into the territory of the United States; and
(3) The good satisfies the conditions and requirements of § 10.542 relating to third country transportation.
(b) A good enumerated in General Note 25(m), HTSUS, that is used in the production of another good in Singapore will not be considered an originating material for purposes of determining the eligibility for preferential tariff treatment of such other good unless:
(1) The good enumerated in General Note 25(m), HTSUS, satisfies an applicable rule of origin set out in General Note 25(o), HTSUS; or
(2) The good enumerated in General Note 25(m), HTSUS, is imported into the territory of Singapore from the territory of the United States prior to being used in the production of a good in Singapore.
(a) Except as provided in paragraphs (b) and (c) of this section, a good that does not undergo a change in tariff classification pursuant to General Note 25(o), HTSUS, will nonetheless be considered to be an originating good if:
(1) The value of all non-originating materials used in the production of the good that do not undergo the applicable change in tariff classification does not exceed 10 percent of the adjusted value of the good;
(2) The value of the non-originating materials described in paragraph (a)(1) of this section is included in calculating the value of non-originating materials for any applicable regional value content requirement for the good under General Note 25(o), HTSUS; and
(3) The good meets all other applicable requirements of General Note 25, HTSUS.
(b) Paragraph (a) does not apply to:
(1) A non-originating material provided for in Chapter 4, HTSUS, or in subheading 1901.90, HTSUS, that is used in the production of a good provided for in Chapter 4, HTSUS;
(2) A non-originating material provided for in Chapter 4, HTSUS, or in subheading 1901.90, HTSUS, that is used in the production of a good provided for in one of the following HTSUS provisions: Subheading 1901.10, 1901.20 or 1901.90; heading 2105; or subheading 2106.90, 2202.90 or 2309.90;
(3) A non-originating material provided for in heading 0805, HTSUS, or subheadings 2009.11 through 2009.39, HTSUS, that is used in the production of a good provided for in subheadings 2009.11 through 2009.39, HTSUS, or in subheading 2106.90 or 2202.90, HTSUS;
(4) A non-originating material provided for in Chapter 15, HTSUS, that is used in the production of a good provided for in headings 1501 through 1508, 1512, 1514 or 1515, HTSUS;
(5) A non-originating material provided for in heading 1701, HTSUS, that is used in the production of a good provided for in headings 1701 through 1703, HTSUS;
(6) A non-originating material provided for in Chapter 17, HTSUS, or heading 1805, HTSUS, that is used in the production of a good provided for in subheading 1806.10, HTSUS;
(7) A non-originating material provided for in headings 2203 through 2208, HTSUS, that is used in the production of a good provided for in heading 2207 or 2208, HTSUS; and
(8) A non-originating material used in the production of a good provided for in Chapters 1 through 21, HTSUS, unless the non-originating material is provided for in a different subheading than the good for which origin is being determined.
(c) A textile or apparel good provided for in Chapters 50 through 63, HTSUS, that is not an originating good because certain fibers or yarns used in the production of the component of the good that determines the tariff classification of the good do not undergo an applicable change in tariff classification set out in General Note 25(o), HTSUS, will nevertheless be considered to be an originating good if the total weight of all such fibers or yarns in that component is not more than 7 percent of the total weight of that component. Notwithstanding the preceding sentence, a textile or apparel good containing elastomeric yarns in the component of the good that determines the tariff classification of the good will be considered an originating good only if such yarns are wholly formed in the territory of a Party.
(a) Originating materials of Singapore or the United States that are used in the production of a good in the territory of the other party will be considered to originate in the territory of the other party.
(b) A good that is produced in the territory of one or both of the Parties by one or more producers, will be considered an originating good if the good satisfies:
(1) The applicable requirements of § 10.531 of this subpart and General Note 25, HTSUS; or
(2) The provisions of § 10.532 of this subpart.
(a)
(b)
(c)
(a)
(1) In the case of a material imported by the producer of the good, the adjusted value of the material;
(2) In the case of a material acquired by the producer in the territory where the good is produced, except for a material to which paragraph (a)(3) of this section applies, the adjusted value of the material with reasonable modifications to the provisions of the Customs Valuation Agreement so as to permit their application to the domestic acquisition by the producer. Such reasonable modifications include, but are not limited to, treating a domestic purchase by the producer as if it were a sale for export to the country of importation; or
The producer in Singapore purchases material x from an unrelated seller in Singapore for $100. Under the provisions of Article 1 of the Customs Valuation Agreement, transaction value is the price actually paid or payable for the goods when sold for export to the country of importation adjusted in accordance with the provisions of Article 8. In order to apply Article 1 to this domestic purchase by the producer, such purchase is treated as if it were a sale for export to the country of importation. Therefore, for purposes of determining the adjusted value of material x, Article 1 transaction value is the price actually paid or payable for the goods when sold to the producer in Singapore ($100), adjusted in accordance with the provisions of Article 8. In this example, it is irrelevant whether material x was initially imported into Singapore by the seller (or by anyone else). So long as the producer acquired material x in Singapore, it is intended that the value of material x will be determined on the basis of the price actually paid or payable by the producer adjusted in accordance with the provisions of Article 8.
Same facts as in Example 1, except the sale between the seller and the producer is subject to certain restrictions that preclude the application of Article 1. Under Article 2 of the Customs Valuation Agreement, the value is the transaction value of identical goods sold for export to the same country of importation and exported at or about the same time as the goods being valued. In order to permit the application of Article 2 to the domestic acquisition by the producer, it should be modified so that the value is the transaction value of identical goods sold within Singapore at or about the same time the goods were sold to the producer in Singapore. Thus, if the seller of material x also sold an identical material to another buyer in Singapore without restrictions, that other sale would be used to determine the adjusted value of material x.
(3) In the case of a self-produced material, or in a case in which the relationship between the producer of the good and the seller of the material influenced the price actually paid or payable for the material, including a material obtained without charge, the sum of:
(i) All expenses incurred in the production of the material, including general expenses; and
(ii) A reasonable amount for profit.
(b)
(i) The costs of freight, insurance, packing, and all other costs incurred in transporting the material to the location of the producer;
(ii) Duties, taxes, and customs brokerage fees on the material paid in the territory of one or both of the Parties, other than duties and taxes that are waived, refunded, refundable or otherwise recoverable, including credit against duty or tax paid or payable; and
(iii) The cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of renewable scrap or by-product; and
(2)
(i) The costs of freight, insurance, packing, and all other costs incurred in transporting the material to the location of the producer;
(ii) Duties, taxes, and customs brokerage fees on the material paid in one or both of the Parties, other than duties and taxes that are waived, refunded, refundable or otherwise recoverable, including credit against duty or tax paid or payable;
(iii) The cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of renewable scrap or by-products;
(iv) The cost of processing incurred in the territory of Singapore or the United States in the production of the non-originating material; and
(v) The cost of originating materials used in the production of the non-originating material in the territory of Singapore or the United States.
(c)
Accessories, spare parts, or tools that are delivered with a good and that form part of the good's standard accessories, spare parts, or tools will be treated as originating goods if the good is an originating good, and will be disregarded in determining whether all the non-originating materials used in the production of the good undergo an applicable change in tariff classification specified in General Note 25(o), HTSUS, provided that:
(a) The accessories, spare parts, or tools are not invoiced separately from the good;
(b) The quantities and value of the accessories, spare parts, or tools are customary for the good; and
(c) If the good is subject to a regional value content requirement, the value of the accessories, spare parts, or tools will be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good under § 10.535 of this subpart.
(a) A person claiming preferential treatment under the SFTA for a good may claim that a fungible good or material is originating either based on the physical segregation of each fungible good or material or by using an inventory management method. For purposes of this subpart, the term “inventory management method” means:
(1) Averaging;
(2) “Last-in, first-out;”
(3) “First-in, first-out;” or
(4) Any other method that is recognized in the Generally Accepted Accounting Principles of the Party in which the production is performed or otherwise accepted by that country.
(b) A person selecting an inventory management method under paragraph (a) of this section for particular fungible goods or materials must continue to use that method for those fungible goods or materials throughout the fiscal year of that person.
Packaging materials and containers in which a good is packaged for retail sale, if classified with the good for which preferential treatment under the SFTA is claimed, will be disregarded in determining whether all non-originating materials used in the production of the good undergo the applicable change in tariff classification set out in General Note 25(o), HTSUS. If the good is subject to a regional value content requirement, the value of such packaging materials and containers will be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good.
Singaporean Producer A of good C imports 100 non-originating blister packages to be used as retail packaging for good C. As provided in § 10.536(a)(1) of this subpart, the value of the blister packages is their adjusted value, which in this case is $10. Good C has a regional value content requirement.
Same facts as in Example 1, but the blister packages are originating. In this case, the adjusted value of the originating blister packages would not be included as part of the VNM of good C under the build-down method. However, if the U.S. importer had used the build-up method, RVC=(VOM/AV) × 100 (
(a) Packing materials and containers for shipment, as defined in § 10.530(j) of this subpart, are to be disregarded in determining whether the non-originating materials used in the production of the good undergo an applicable change in tariff classification set out in General Note 25(o), HTSUS. Accordingly, such materials and containers are not required to undergo the applicable change in tariff classification even if they are non-originating.
(b) Packing materials and containers for shipment, as defined in § 10.530(j) of this subpart, are to be disregarded in determining the regional value content of a good imported into the United States. Accordingly, in applying either the build-down or build-up method for determining the regional value content of the good imported into the United States, the value of such packing materials and containers for shipment (whether originating or non-originating) is disregarded and not included in AV, adjusted value, VNM, value of non-originating materials, or VOM, value of originating materials.
Singaporean Producer A produces good C. Producer A ships good C to the U.S. in a shipping container which it purchased from Company B in Singapore. The shipping container is originating. The value of the shipping container determined under section § 10.536(a)(2) of this subpart is $3. Good C is subject to a regional value content requirement. The transaction value of good C is $100, which includes the $3 shipping container. The United States importer decides to use the build-up method, RVC=(VOM/AV) × 100 (
An indirect material, as defined in § 10.502(j) of this subpart, will be considered to be an originating material without regard to where it is produced, and its value will be the cost registered in the accounting records of the producer of the good.
Singaporean Producer C produces good C using non-originating material A. Producer C imports non-originating rubber gloves for use by workers in the production of good C. Good C is subject to a tariff shift requirement. As provided in § 10.531(b)(1) of this subpart and General Note 25(o), each of the non-originating materials in good C must undergo the specified change in tariff classification in order for good C to be considered originating. Although non-originating material A must undergo the applicable tariff shift in order for good C to be considered originating, the rubber gloves do not because they are indirect materials and are considered originating without regard to where they are produced.
(a)
(b)
Notwithstanding the provisions of § 10.531 of this subpart, a textile apparel article of Chapter 61 or 62, HTSUS, will be considered an originating good under the SFTA if it is both cut (or knit to shape) and sewn or otherwise assembled in one or both of the Parties from fabric or yarn, regardless of origin, designated by the Committee for the Implementation of Textile Agreements (“CITA”) as not available in commercial quantities in a timely manner in the United States. Such designations by CITA, identifying apparel goods made from such fabric or yarn as eligible for entry under subheading 9819.11.24 or 9820.11.27, HTSUS, must have been made by notices published in the
(a)
(1) Requests for information from the importer;
(2) Written requests for information to the exporter or producer;
(3) Requests for the importer to arrange for the exporter or producer to provide information directly to CBP;
(4) Visits to the premises of the exporter or producer in Singapore, in accordance with procedures that the Parties adopt pertaining to verification; and
(5) Such other procedures as the Parties may agree.
(b)
If, as a result of an origin verification initiated under § 10.550 of this subpart, CBP denies a claim for preferential treatment made under § 10.510(a) of this subpart, it will issue a determination in writing or via an authorized electronic data interchange system to the importer that sets forth the following:
(a) A description of the good that was the subject of the verification together with the identifying numbers and dates of the import documents pertaining to the good;
(b) A statement setting forth the findings of fact made in connection with the verification and upon which the determination is based; and
(c) With specific reference to the rules applicable to originating goods as set forth in General Note 25, HTSUS, and in §§ 10.530 through 10.543 of this subpart, the legal basis for the determination.
(a)
(b)
(a)
(b)
(a)
(b)
(1) With respect to a first finding, the applicable period is six months;
(2) With respect to a second finding, the applicable period is two years; or
(3) With respect to a third or subsequent finding, the applicable period is two years. If, at the time of a third or subsequent finding, an exclusion of goods with respect to an enterprise is in effect as a result of a previous finding, the two-year period applicable to the third or subsequent finding will begin on the day after the day on which the previous exclusion period terminates.
Except as otherwise provided in this subpart, all criminal, civil or administrative penalties which may be imposed on U.S. importers for violations of the customs and related laws and regulations will also apply to U.S. importers for violations of the laws and regulations relating to the SFTA.
An importer who makes a corrected claim under § 10.510(b) will not be subject to civil or administrative penalties under 19 U.S.C. 1592 for having made an incorrect claim or supporting statement, provided that the corrected claim is promptly and voluntarily made.
(a)
(1)(i) Done within one year following the date on which the importer made the incorrect claim; or
(ii) Done later than one year following the date on which the importer made the incorrect claim, provided that the corrected claim is made:
(A) Before the commencement of a formal investigation, within the meaning of § 162.74(g) of this chapter; or
(B) Before any of the events specified in § 162.74(i) of this chapter has occurred; or
(C) Within 30 days after the importer initially becomes aware that the incorrect claim is not valid; and
(2) Accompanied by a statement setting forth the information specified in paragraph (c) of this section; and
(3) Accompanied or followed by a tender of any actual loss of duties and merchandise processing fees, if applicable, in accordance with paragraph (e) of this section.
(b)
(2)
(c)
(1) Identifies the class or kind of good to which the incorrect claim relates;
(2) Identifies each affected import transaction, including each port of importation and the approximate date of each importation.
(3) Specifies the nature of the incorrect statements or omissions regarding the claim; and
(4) Sets forth, to the best of the person's knowledge, the true and accurate information or data which should have been covered by or provided in the claim, and states that the person will provide any additional information or data which is unknown at the time of making the corrected claim within 30 days or within any extension of that 30-day period as CBP may permit in order for the person to obtain the information or data.
(d)
(e)
(f)
(a)
(b)
(c)