[Federal Register Volume 59, Number 191 (Tuesday, October 4, 1994)] [Unknown Section] [Page 0] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 94-24459] [[Page Unknown]] [Federal Register: October 4, 1994] ======================================================================= ----------------------------------------------------------------------- NUCLEAR REGULATORY COMMISSION [Docket No. 50-397] Washington Public Power Supply System; Notice of Withdrawal of Application for Amendment to Facility Operating License The United States Nuclear Regulatory Commission (the Commission) has granted the request of the Washington Public Power Supply System (WPPSS, or the licensee) to withdraw its October 23, 1990, application for proposed amendment to Facility Operating License No. NPF-21 for the WPPSS Nuclear Project No. 2, located in Benton County, Washington. The proposed amendment would have revised the technical specifications to add specific action statements for the event of inoperable scram discharge volume vent and/or drain valves. The Commission had previously issued a Notice of Consideration of Issuance of Amendment published in the Federal Register on August 7, 1991 (56 FR 37591). However, by letter dated September 2, 1994, the licensee withdrew the proposed change. For further details with respect to this action, see the application for amendment dated October 23, 1990, and the licensee's letter dated September 2, 1994, which withdrew the application for license amendment. The above documents are available for public inspection at the Commission's Public Document Room, 2120 L Street, NW., Washington, DC, and the Richland Public Library, 955 Northgate Street, Richland, Washington 99352. Dated at Rockville, Maryland, this 27th day of September 1994. For the Nuclear Regulatory Commission. James W. Clifford, Senior Project Manager, Project Directorate IV-2, Division of Reactor Projects--III/IV, Office of Nuclear Reactor Regulation. [FR Doc. 94-24459 Filed 10-3-94; 8:45 am] BILLING CODE 7950-01-M