[Federal Register Volume 65, Number 7 (Tuesday, January 11, 2000)]
[Proposed Rules]
[Page 1572]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 00-701]


========================================================================
Proposed Rules
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains notices to the public of 
the proposed issuance of rules and regulations. The purpose of these 
notices is to give interested persons an opportunity to participate in 
the rule making prior to the adoption of the final rules.

========================================================================


Federal Register / Vol. 65, No. 7 / Tuesday, January 11, 2000 / 
Proposed Rules

[[Page 1572]]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

National Institute of Standards and Technology

15 CFR Part 280

[Docket No. 980623159-9316-03]
RIN 0693-AB47


Procedures for Implementation of the Fastener Quality Act

AGENCY: National Institute of Standards and Technology and the Bureau 
of Export Administration and the Patent and Trademark Office, United 
States Department of Commerce.

ACTION: Proposed rule; extension of comment period.

-----------------------------------------------------------------------

SUMMARY: The National Institute of Standards and Technology (NIST) and 
the Bureau of Export Administration (BXA) and the Patent and Trademark 
Office (PTO), United States Department of Commerce, are extending for 
15 days the period for submitting comments on the proposed rule 
amending the regulations pertaining to the implementation of the 
Fastener Quality Act. NIST, BXA, and PTO are granting this extension 
based on requests received from the public for an extension of the 
comment period.

DATES: Comments must be received no later than January 28, 2000.

ADDRESSES: Comments must be submitted to Dr. Subhas Malghan, Director's 
Office, Technology Services, National Institute of Standards and 
Technology, Mail Stop 2000, Gaithersburg, MD 20899-2000; telephone 
number (301) 975-4510.

FOR FURTHER INFORMATION CONTACT: Dr. Subhas Malghan, Director's Office, 
Technology Services, National Institute of Standards and Technology, 
Mail Stop 2000, Gaithersburg, MD 20899-2000; telephone number (301) 
975-4510.

SUPPLEMENTARY INFORMATION: In the Federal Register of December 15, 1999 
(64 FR 69969), NIST, BXA, and PTO proposed changes to their existing 
Fastener Quality Act (FQA) regulations to implement amendments to the 
FQA contained in the Fastener Quality Act Amendments of 1999 (Pub. L. 
106-234). Interested parties were given until January 14, 2000 to 
submit written comments on the proposed rule.
    Two representatives of the aerospace industry, two representatives 
of the fastener industry, and two fastener manufacturers have submitted 
requests to extend the comment period on the proposed rulemaking. The 
extension is sought because, since the holiday season fell in the 
middle of the comment period, there was not sufficient time to 
correlate industry comments and meet the stipulated January 14, 2000 
due date.
    To be responsive to these requests, and to ensure that the public 
has sufficient time to formulate appropriate comments, NIST, BXA, and 
PTO are granting an extension of 15 days. Although this notice is being 
issued by NIST, the extension applies to comments regarding all 
subparts of the proposed rule. Comments must be received at the address 
given above no later than January 28, 2000.

    Dated: January 7, 2000.
Karen H. Brown,
Deputy Director.
[FR Doc. 00-701 Filed 1-10-00; 8:45 am]
BILLING CODE 3510-13-M