[Federal Register Volume 72, Number 30 (Wednesday, February 14, 2007)]
[Notices]
[Pages 7086-7088]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E7-2474]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Employment and Training Administration
Notice of Determinations Regarding Eligibility To Apply for
Worker Adjustment Assistance and Alternative Trade Adjustment
Assistance
In accordance with Section 223 of the Trade Act of 1974, as amended
(19 U.S.C. 2273) the Department of Labor herein presents summaries of
determinations regarding eligibility to apply for trade adjustment
assistance for workers (TA-W) number and alternative trade adjustment
assistance (ATAA) by (TA-W) number issued during the period of January
22 through February 2, 2007.
In order for an affirmative determination to be made for workers of
a primary firm and a certification issued regarding eligibility to
apply for worker adjustment assistance, each of the group eligibility
requirements of Section 222(a) of the Act must be met.
I. Section (a)(2)(A) all of the following must be satisfied:
A. A significant number or proportion of the workers in such
workers' firm, or an appropriate subdivision of the firm, have become
totally or partially separated, or are threatened to become totally or
partially separated;
B. the sales or production, or both, of such firm or subdivision
have decreased absolutely; and
C. increased imports of articles like or directly competitive with
articles produced by such firm or subdivision have contributed
importantly to such workers' separation or threat of separation and to
the decline in sales or production of such firm or subdivision; or
II. Section (a)(2)(B) both of the following must be satisfied:
A. A significant number or proportion of the workers in such
workers' firm, or an appropriate subdivision of the firm, have become
totally or partially separated, or are threatened to become totally or
partially separated;
B. there has been a shift in production by such workers' firm or
subdivision to a foreign country of articles like or directly
competitive with articles which are produced by such firm or
subdivision; and
C. One of the following must be satisfied:
1. The country to which the workers' firm has shifted production of
the articles is a party to a free trade agreement with the United
States;
2. the country to which the workers' firm has shifted production of
the articles to a beneficiary country under the Andean Trade Preference
Act, African Growth and Opportunity Act, or the Caribbean Basin
Economic Recovery Act; or
3. there has been or is likely to be an increase in imports of
articles that are like or directly competitive with articles which are
or were produced by such firm or subdivision.
Also, in order for an affirmative determination to be made for
secondarily affected workers of a firm and a certification issued
regarding eligibility to apply for worker adjustment assistance, each
of the group eligibility requirements of Section 222(b) of the Act must
be met.
(1) Significant number or proportion of the workers in the workers'
firm or an appropriate subdivision of the firm have become totally or
partially separated, or are threatened to become totally or partially
separated;
(2) The workers' firm (or subdivision) is a supplier or downstream
producer to a firm (or subdivision) that employed a group of workers
who received a certification of eligibility to apply for trade
adjustment assistance benefits and such supply or production is related
to the article that was the basis for such certification; and
(3) Either--
(A) The workers' firm is a supplier and the component parts it
supplied for the firm (or subdivision) described in paragraph (2)
accounted for at least 20 percent of the production or sales of the
workers' firm; or
(B) A loss of business by the workers' firm with the firm (or
subdivision) described in paragraph (2) contributed importantly to the
workers' separation or threat of separation.
In order for the Division of Trade Adjustment Assistance to issue a
certification of eligibility to apply for Alternative Trade Adjustment
Assistance (ATAA) for older workers, the group eligibility requirements
of Section 246(a)(3)(A)(ii) of the Trade Act must be met.
1. Whether a significant number of workers in the workers' firm are
50 years of age or older.
2. Whether the workers in the workers' firm possess skills that are
not easily transferable.
3. The competitive conditions within the workers' industry (i.e.,
conditions within the industry are adverse).
Affirmative Determinations for Worker Adjustment Assistance
The following certifications have been issued. The date following
the company name and location of each determination references the
impact date for all workers of such determination.
The following certifications have been issued. The requirements of
Section 222(a)(2)(A) (increased imports) of the Trade Act have been
met.
TA-W-60,778; Northern Expediting Corporation, Union, NJ: January 9,
2006.
The following certifications have been issued. The requirements of
Section 222(a)(2)(B) (shift in production) of the Trade Act have been
met.
TA-W-60,281; Airtex Products LP, Marked Tree, AR: October 20, 2005.
TA-W-60,611; BMCI Rodgers Molding Corp., A Subsidiary of Bulk Molding
Compounds, El Paso, TX: December 13, 2005.
TA-W-60,664; Hoffmann--La Roche, Inc., Biopharmaceutical Manufacturing
Department, Nutley, NJ: December 21, 2005.
The following certifications have been issued. The requirements of
Section 222(b) (supplier to a firm whose workers are certified eligible
to apply for TAA) of the Trade Act have been met.
TA-W-60,728; Hoover Universal, Inc., d/b/a Johnson Controls, AG
Division, Oklahoma City, OK: December 13, 2005.
The following certifications have been issued. The requirements of
Section 222(b) (downstream producer for a firm whose workers are
certified eligible to apply for TAA based on increased imports from or
a shift in production to Mexico or Canada) of the Trade Act have been
met.
Affirmative Determinations for Worker Adjustment Assistance and
Alternative Trade Adjustment Assistance
The following certifications have been issued. The date following
the company name and location of each determination references the
impact date for all workers of such determination.
The following certifications have been issued. The requirements of
Section 222(a)(2)(A) (increased imports) and Section 246(a)(3)(A)(ii)
of the Trade Act have been met.
TA-W-60,319; Rose Art Industries, LLC, Wood Ridge, NJ: October 24,
2005.
TA-W-60,319A; Rose Art Industries, LLC, Livingston, NJ: October 24,
2005.
[[Page 7087]]
TA-W-60,675; Pittsburgh Corning Corp., Glass Block Division, Port
Allegany, PA: December 21, 2005.
TA-W-60,677; Win Depot, LLC, Long Island City, NY: December 27, 2005.
TA-W-60,680; Cecilware Corporation, Long Island City, NY: December 18,
2005.
TA-W-60,712; Keneric Corporation, Obion Plant, Obion, TN: December 28,
2005.
TA-W-60,712A; Keneric Corporation, Altamont Plant, Altamont, TN:
December 28, 2005.
TA-W-60,713; Missouri Fabricated Products, Gleason Corporation,
Caruthersville, MO: January 5, 2006.
TA-W-60,722; Kirchner Corporation, Golden Valley, MN: January 8, 2006.
TA-W-60,731; Best Manufacturing Co., Menlo, GA: January 9, 2006.
TA-W-60,749; Narrow Fabric Industries Corp., A Subsidiary of Cheynet
Group, West Reading, PA: January 9, 2006.
TA-W-60,774; Rayloc, Inc., Stephenville, TX: January 16, 2006.
TA-W-60,803; Fluidyne Manufacturing/Lorenz Industries, Staffworks,
Inc., Ansonia, CT: January 19, 2006.
TA-W-60,815; Dicey Mills, Inc., Shelby, NC: January 22, 2007.
TA-W-60,445; Manchester Tool Co., Akron, OH: November 14, 2005.
TA-W-60,486A; Alma Products Co., Torque Converters, Alma, MI: November
22, 2005.
TA-W-60,500; Potlatch Forest Products Corporation, Warren Lumber Mill,
Warren, AR: November 29, 2005.
TA-W-60,538; Hipwell Manufacturing Holding Co., Pittsburgh, PA:
December 4, 2005.
TA-W-60,589; Ace Industries, LLC, Lineville, AL: December 11, 2005.
TA-W-60,591; Leggett and Platt, Inc., Bedding Division, Phoenix, AZ:
December 5, 2005.
TA-W-60,592; South End Manufacturing, Lawrenceburg, TN: December 6,
2005.
TA-W-60,607; Stimson Lumber Company, Bonner Stud Mill, Bonner, MT:
December 5, 2005.
TA-W-60,612; Riley Creek Lumber Company, Moyie Springs Mill, Moyie
Springs, ID: December 13, 2005.
TA-W-60,761; Doyle Enterprises, Inc., Rock Mount, VA: January 11, 2006.
The following certifications have been issued. The requirements of
Section 222(a)(2)(B) (shift in production) and Section 246(a)(3)(A)(ii)
of the Trade Act have been met.
TA-W-60,637; Zomax, Inc., Plymouth, MN: December 18, 2005.
TA-W-60,649; Strattec Security Corp., Service Department, Milwaukee,
WI: December 14, 2005.
TA-W-60,650; Bourns, Inc., Formerly Known As SSI Technologies, Inc.,
Janesville, WI: December 19, 2005.
TA-W-60,654; Badger Fire Protection / UTC Fire and Security, Badger
Fire Protection Division, Charlottesville, VA: December 20, 2005.
TA-W-60,689; Ronfeldt Associates, Inc., Toledo, OH: December 21, 2005.
TA-W-60,690; Bestop, Inc., Broomfield, CO: January 2, 2006.
TA-W-60,701; Uniflex Holdings, Inc., Hicksville, NY: January 3, 2006.
TA-W-60,701A; Uniflex Holdings, Inc., Westbury, NY: January 3, 2006.
TA-W-60,711; Hurd Lock and Manufacturing Co., Greenville, TN: January
4, 2006.
TA-W-60,717; Lear Corporation, Seating Systems Division, Romulus, MI:
January 5, 2006.
TA-W-60,718; Renfro Charleston, LLC, Cleveland, TN: January 2, 2006.
TA-W-60,720; Specialty Electronics, Inc., Delphi Connection Systems
Division, Landrum, SC: January 15, 2007.
TA-W-60,723; Pechiney Plastic Packaging, Inc., A Subsidiary of Alcan,
Tubes America Division, Washington, NJ: March 10, 2006.
TA-W-60,725; Birds Eye Foods, Inc., Watsonville, CA: January 9, 2006.
TA-W-60,730; Jabil Circuit, Inc., Auburn Hills, MI: May 14, 2006.
TA-W-60,732; Trend Tool, Inc., A Subsidiary of Magna International,
Livonia, MI: December 19, 2005.
TA-W-60,736; Cooper Power System, Cooper Industries, Kearney
Operations, Fayetteville, AR: January 27, 2007.
TA-W-60,737; Atwood Mobile Products, Division of Dura Automotive
Systems, Inc., LaGrange, IN: January 3, 2006.
TA-W-60,746; D J, Inc., Adecco and Staff Store, El Paso, TX: January
10, 2006.
TA-W-60,752; Alcoa Engineered Plastic Components, AFL Automotive
Division, El Paso, TX: January 11, 2006.
TA-W-60,766; Travel Tags, Inver Grove Heights, MN: January 12, 2006.
TA-W-60,784; Victaulic Company, Apex Valve Trim Assembly, New Village,
NJ: January 17, 2006.
TA-W-60,829; F and M Hat Company, Inc., Denver, PA: January 24, 2006.
TA-W-60,858; Delphi Corporation, Automotive Holdings Group, Anderson,
IN: January 23, 2006.
TA-W-60,616; APW Enclosures, Anaheim, CA: December 14, 2005.
TA-W-60,667; Icelandic USA, Inc., Cambridge, MD: December 22, 2005.
TA-W-60,669; Connor Corporation, Fort Wayne, IN: December 27, 2005.
TA-W-60,745; Bush Industries, Inc., Erie, PA: January 10, 2006.
TA-W-60,767; Portola Tech International, Staff-U-Smart, Woonsocket, RI:
December 22, 2005.
The following certifications have been issued. The requirements of
Section 222(b) (supplier to a firm whose workers are certified eligible
to apply for TAA) and Section 246(a)(3)(A)(ii) of the Trade Act have
been met.
TA-W-60,520; Lear Corporation, Electric Systems Division, Southfield,
MI: November 30, 2005.
TA-W-60,622; ArvinMeritor, Inc, Light Vehicles, Olsten Staffing,
Mullins, SC: December 5, 2005.
TA-W-60,641; Collis, Inc., A Subsidiary of SSW Holding Co., Evansville,
IN: December 19, 2005.
TA-W-60,678; Keystone Powdered Metal Company, St. Mary's Division, St.
Mary's, PA: December 28, 2005.
TA-W-60,679; Greenwood Mills, Inc., Mathews Plant, Greenwood, SC:
December 19, 2005.
TA-W-60,706; Ameritex Yarn, LLC, Spartanburg Plant, Spartanburg, SC:
January 2, 2006.
TA-W-60,727; Johnson Controls, Inc., Automotive Division, Chesapeake,
VA: January 9, 2006.
TA-W-60,733; L and R Knitting, Inc., Hickory, NC: January 8, 2006.
TA-W-60,743; Atotech USA, Inc., Subsidiary of Total S.A., Express
Personnel, On Assignment, Rock Hill, SC: January 9, 2006.
The following certifications have been issued. The requirements of
Section 222(b) (downstream producer for a firm whose workers are
certified eligible to apply for TAA based on increased imports from or
a shift in production to Mexico or Canada) and Section 246(a)(3)(A)(ii)
of the Trade Act have been met.
None.
Negative Determinations for Alternative Trade Adjustment Assistance
In the following cases, it has been determined that the
requirements of 246(a)(3)(A)(ii) have not been met for the reasons
specified.
The Department has determined that criterion (1) of Section 246 has
not been met. Workers at the firm are 50 years of age or older.
TA-W-60,778; Northern Expediting Corporation, Union, NJ.
TA-W-60,281; Airtex Products LP, Marked Tree, AR.
[[Page 7088]]
TA-W-60,611; BMCI Rodgers Molding Corp., A Subsidiary of Bulk Molding
Compounds, El Paso, TX.
TA-W-60,728; Hoover Universal, Inc., d/b/a Johnson Controls, AG
Division, Oklahoma City, OK.
The Department has determined that criterion (2) of Section 246 has
not been met. Workers at the firm possess skills that are easily
transferable.
TA-W-60,664; Hoffmann-La Roche, Inc., Biopharmaceutical Manufacturing
Department, Nutley, NJ.
The Department has determined that criterion (3) of Section 246 has
not been met. Competition conditions within the workers' industry are
not adverse.
None.
Negative Determinations for Worker Adjustment Assistance and
Alternative Trade Adjustment Assistance
In the following cases, the investigation revealed that the
eligibility criteria for worker adjustment assistance have not been met
for the reasons specified.
Because the workers of the firm are not eligible to apply for TAA,
the workers cannot be certified eligible for ATAA.
The investigation revealed that criteria (a)(2)(A)(I.A.) and
(a)(2)(B)(II.A.) (employment decline) have not been met.
TA-W-60,631; Jay-Enn Corporation, Troy, MI.
TA-W-60,780; Cer-Tek, Inc., El Paso, TX.
The investigation revealed that criteria (a)(2)(A)(I.B.) (Sales or
production, or both, did not decline) and (a)(2)(B)(II.B.) (shift in
production to a foreign country) have not been met.
TA-W-60,571; Caribe General Electric, Humacao, PR.
TA-W-60,714; Extreme Tool and Engineering, Wakefield, MI.
TA-W-60,741; E.J. Victor, Inc., Case Goods Division, Morganton, NC.
TA-W-60,754; Page Foam Cushioned Products, Johnstown, PA.
The investigation revealed that criteria (a)(2)(A)(I.C.) (increased
imports) and (a)(2)(B)(II.B.) (shift in production to a foreign
country) have not been met.
TA-W-60,486; Alma Products Co., A/C Compressors, Alma, MI.
TA-W-60,490; Bollag International Corp., Greenwood, SC.
TA-W-60,516; Milliken and Company, Kingstree Mill Division, Kingstree,
SC.
TA-W-60,530; Tower Automotive, Inc., Upper Sandusky, OH.
TA-W-60,577; Dixie Regency Foam, Division of Hickory Springs Mfg. Co.,
Hickory, NC.
TA-W-60,610; Belding Hausman, Inc., Southampton Textiles Division,
Emporia, VA.
TA-W-60,625; Huntington Foam Pittsburgh Corp., A Subsidiary of
Huntington Foam Corp., Mt. Pleasant, PA.
TA-W-60,626; Baseline Tool Company, Inc., Wawaka, IN.
TA-W-60,656; Carpenter Company, Consumer Products Division, Hickory,
NC.
TA-W-60,775; Oxbow Machine Products, Livonia, MI.
TA-W-60,597; Mason County Forest Products, Shelton, WA.
TA-W-60,647; Ito Cariani Foods, Hayward, CA.
TA-W-60,685; ACE Style Intimate Apparel, Inc., New York, NY.
The investigation revealed that the predominate cause of worker
separations is unrelated to criteria (a)(2)(A)(I.C.) (increased
imports) and (a)(2)(B)(II.C) (shift in production to a foreign country
under a free trade agreement or a beneficiary country under a
preferential trade agreement, or there has been or is likely to be an
increase in imports).
None.
The workers' firm does not produce an article as required for
certification under section 222 of the Trade Act of 1974.
TA-W-60,505; Calstar Textiles, Inc., Vernon, CA.
TA-W-60,529; Hospira, Inc., Shared Services Department, Rocky Mount,
NC.
TA-W-60,606; Pfizer, Inc., Pfizer Global Research and Development
Group, Kalamazoo, MI.
TA-W-60,651; AOL LLC, Oklahoma City Call Center, Oklahoma City, OK.
TA-W-60,768; IDT Corporation, IDT Telecom, Newark, NJ.
The investigation revealed that criteria of section 222(b)(2) has
not been met. The workers' firm (or subdivision) is not a supplier to
or a downstream producer for a firm whose workers were certified
eligible to apply for TAA.
TA-W-60,495; Dumaine Investment Company, dba Industrial Tool and
Engineering, Warrenville, SC.
I hereby certify that the aforementioned determinations were issued
during the period of January 22 through February 2, 2007. Copies of
these determinations are available for inspection in Room C-5311, U.S.
Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210
during normal business hours or will be mailed to persons who write to
the above address.
Dated: February 6, 2007.
Linda G. Poole,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E7-2474 Filed 2-13-07; 8:45 am]
BILLING CODE 4510-FN-P