A prior chapter 148, comprised of section 2501 et seq., relating to defense industrial base, was repealed, except for sections 2504 to 2507, by Pub. L. 102–484, div. D, title XLII, §4202(a), Oct. 23, 1992, 106 Stat. 2659. Sections 2504 to 2507 of that chapter were renumbered sections 2531 to 2534, respectively, of this chapter by Pub. L. 102–484, §4202(a).
A prior chapter 149, comprised of sections 2511 to 2518, relating to manufacturing technology, was repealed, except for sections 2517 and 2518, by Pub. L. 102–484, div. D, title XLII, §4202(a), Oct. 23, 1992, 106 Stat. 2659. Sections 2517 and 2518 of that chapter were renumbered sections 2523 and 2522, respectively, of this chapter by Pub. L. 102–484, div. D, title XLII, §§4232(a), 4233(a), Oct. 23, 1992, 106 Stat. 2687, and were subsequently repealed.
Another prior chapter 149, comprised of section 2511, was successively renumbered chapter 150 of this title, comprised of section 2521, then chapter 152 of this title, comprised of section 2540 et seq.
A prior chapter 150, comprised of sections 2521 to 2526, relating to development of dual-use critical technologies, was repealed, except for sections 2524 to 2526, by Pub. L. 102–484, div. D, title XLII, §4202(a), Oct. 23, 1992, 106 Stat. 2659. Sections 2524, 2525, and 2526 of that chapter were renumbered sections 2513, 2517, and 2518, respectively, of this chapter by Pub. L. 102–484, div. D, title XLII, §§4223(a), 4227(a), 4228, Oct. 23, 1992, 106 Stat. 2681, 2685. Section 2513 of this chapter was subsequently repealed.
Another prior chapter 150, comprised of section 2521, was renumbered chapter 152 of this title, comprised of section 2540 et seq.
2000—Pub. L. 106–398, §1 [[div. A], title X, §1033(a)(2)], Oct. 30, 2000, 114 Stat. 1654, 1654A–260, added item for subchapter VII.
1998—Pub. L. 105–261, div. A, title X, §1069(a)(4), Oct. 17, 1998, 112 Stat. 2136, substituted “2500” for “2491” in item for subchapter I and struck out “and Dual-Use Assistance Extension Programs” after “Technology” in item for subchapter IV.
1996—Pub. L. 104–106, div. A, title XIII, §1321(a)(2), Feb. 10, 1996, 110 Stat. 477, added item for subchapter VI.
1997—Pub. L. 105–85, div. A, title III, §371(c)(4), Nov. 18, 1997, 111 Stat. 1705, renumbered item 2491 as 2500.
In this chapter:
(1) The term “national technology and industrial base” means the persons and organizations that are engaged in research, development, production, or maintenance activities conducted within the United States and Canada.
(2) The term “dual-use” with respect to products, services, standards, processes, or acquisition practices, means products, services, standards, processes, or acquisition practices, respectively, that are capable of meeting requirements for military and nonmilitary applications.
(3) The term “dual-use critical technology” means a critical technology that has military applications and nonmilitary applications.
(4) The term “technology and industrial base sector” means a group of public or private persons and organizations that engage in, or are capable of engaging in, similar research, development, or production activities.
(5) The terms “Federal laboratory” and “laboratory” have the meaning given the term “laboratory” in section 12(d)(2) of the Stevenson-Wydler Technology Innovation Act of 1980 (15 U.S.C. 3710a(d)(2)), except that such terms include a federally funded research and development center sponsored by a Federal agency.
(6) The term “critical technology” means a technology that is—
(A) a national critical technology; or
(B) a defense critical technology.
(7) The term “national critical technology” means a technology that appears on the list of national critical technologies contained in the most recent biennial report on national critical technologies submitted to Congress by the President pursuant to section 603(d) 1 of the National Science and Technology Policy, Organization, and Priorities Act of 1976 (42 U.S.C. 6683(d)).
(8) The term “defense critical technology” means a technology that is identified under section 2505 of this title as critical for attaining the national security objectives set forth in section 2501(a) of this title.
(9) The term “eligible firm” means a company or other business entity that, as determined by the Secretary of Commerce—
(A) conducts a significant level of its research, development, engineering, and manufacturing activities in the United States; and
(B) is a company or other business entity the majority ownership or control of which is by United States citizens or is a company or other business of a parent company that is incorporated in a country the government of which—
(i) encourages the participation of firms so owned or controlled in research and development consortia to which the government of that country provides funding directly or provides funding indirectly through international organizations or agreements; and
(ii) affords adequate and effective protection for the intellectual property rights of companies incorporated in the United States.
Such term includes a consortium of such companies or other business entities, as determined by the Secretary of Commerce.
(10) The term “manufacturing technology” means techniques and processes designed to improve manufacturing quality, productivity, and practices, including quality control, shop floor management, inventory management, and worker training, as well as manufacturing equipment and software.
(11) The term “Small Business Innovation Research Program” means the program established under the following provisions of section 9 of the Small Business Act (15 U.S.C. 638):
(A) Paragraphs (4) through (7) of subsection (b).
(B) Subsections (e) through (l).
(12) The term “Small Business Technology Transfer Program” means the program established under the following provisions of such section:
(A) Paragraphs (4) through (7) of subsection (b).
(B) Subsections (e) and (n) through (p).
(13) The term “significant equity percentage” means—
(A) a level of contribution and participation sufficient, when compared to the other non-Federal participants in the partnership or other cooperative arrangement involved, to demonstrate a comparable long-term financial commitment to the product or process development involved; and
(B) any other criteria the Secretary may consider necessary to ensure an appropriate equity mix among the participants.
(14) The term “person of a foreign country” has the meaning given such term in section 3502(d) of the Primary Dealers Act of 1988 (22 U.S.C. 5342(d)).
(Added Pub. L. 102–484, div. D, title XLII, §4203(a), Oct. 23, 1992, 106 Stat. 2661, §2491; amended Pub. L. 103–160, div. A, title XI, §1182(a)(9), title XIII, §1315(f), Nov. 30, 1993, 107 Stat. 1771, 1788; Pub. L. 103–337, div. A, title XI, §§1113(d), 1115(e), Oct. 5, 1994, 108 Stat. 2866, 2869; Pub. L. 104–106, div. A, title X, §1081(h), Feb. 10, 1996, 110 Stat. 455; renumbered §2500 and amended Pub. L. 105–85, div. A, title III, §371(b)(3), title X, §1073(a)(53), Nov. 18, 1997, 111 Stat. 1705, 1903.)
Section 603 of the National Science and Technology Policy, Organization, and Priorities Act of 1976, referred to in par. (7), was classified to section 6683 of Title 42, The Public Health and Welfare, and was omitted from the Code.
Provisions similar to those in this section were contained in former sections 2511 and 2521 of this title prior to repeal by Pub. L. 102–484, §4202(a).
1997—Pub. L. 105–85, §371(b)(3), renumbered section 2491 of this title as this section.
Par. (8). Pub. L. 105–85, §1073(a)(53), substituted “that is identified under section 2505 of this title as critical for attaining the national security objectives set forth in section 2501(a) of this title.” for “that appears on the list of critical technologies contained, pursuant to subsection (b)(4) of section 2505 of this title, in the most recent national technology and industrial base assessment submitted to Congress by the Secretary of Defense pursuant to section 2506(e) of this title.”
1996—Pars. (11) to (16). Pub. L. 104–106 redesignated pars. (13) to (16) as (11) to (14), respectively, and struck out former pars. (11) and (12) which read as follows:
“(11) The term ‘manufacturing extension program’ means a public or private, nonprofit program for the improvement of the quality, productivity, and performance of United States-based small manufacturing firms in the United States.
“(12) The term ‘United States-based small manufacturing firm’ means a company or other business entity that, as determined by the Secretary of Commerce—
“(A) engages in manufacturing;
“(B) has less than 500 employees; and
“(C) is an eligible firm.”
1994—Par. (5). Pub. L. 103–337, §1113(d), inserted before period at end “, except that such terms include a federally funded research and development center sponsored by a Federal agency”.
Par. (16). Pub. L. 103–337, §1115(e), added par. (16).
1993—Par. (2). Pub. L. 103–160, §1182(a)(9)(A), substituted “nonmilitary applications” for “nonmilitary application”.
Par. (8). Pub. L. 103–160, §1182(a)(9)(B), substituted “subsection (b)(4)” for “subsection (f)”.
Pars. (13) to (15). Pub. L. 103–160, §1315(f), added pars. (13) to (15).
Section 1101 of title XI of div. A of Pub. L. 103–337 provided that: “This title [enacting sections 2519 and 2520 of this title, amending this section, sections 1151, 1152, 2391, 2511 to 2513, and 2524 of this title, and sections 1662d and 1662d–1 of Title 29, Labor, and enacting and amending provisions set out as notes under section 2501 of this title] may be cited as the ‘Defense Conversion, Reinvestment, and Transition Assistance Amendments of 1994’.”
Section 1301 of title XIII of div. A of Pub. L. 103–160 provided that: “This title [enacting sections 1152 and 1153 of this title and sections 1279d, 1279e, and 1280a of the Appendix to Title 46, Shipping, amending this section, sections 1142, 1151, 1598, 2410j, 2501, 2502, 2511 to 2513, 2523, and 2524 of this title, sections 1551 and 1662d–1 of Title 29, Labor, section 31326 of Title 46, and sections 1271, 1273, 1274, and 1274a of the Appendix to Title 46, repealing section 2504 of this title, enacting provisions set out as notes under sections 1143, 1151, 2501, 2511, 2701, and 5013 of this title, section 1662d–1 of Title 29, and sections 1279b and 1279d of the Appendix to Title 46, amending provisions set out as notes under sections 1143, 2391, and 2501 of this title, and repealing provisions set out as a note under section 2701 of this title] may be cited as the ‘Defense Conversion, Reinvestment, and Transition Assistance Amendments of 1993’.”
Section 4001 of Pub. L. 102–484 provided that: “This division [div. D (§§4001–4501) of Pub. L. 102–484, see Tables for classification] may be cited as the ‘Defense Conversion, Reinvestment, and Transition Assistance Act of 1992’.”
Amendment by section 1315(f) of Pub. L. 103–160 not to alter financial commitment requirements in effect on the day before Nov. 30, 1993, for non-Federal Government participants in a project funded under section 2511, 2512, 2513, 2523, or 2524 of this title, using funds appropriated for a fiscal year beginning before Oct. 1, 1993, see section 1315(g) of Pub. L. 103–160, set out as a note under section 2511 of this title.
Section 4101 of Pub. L. 102–484 provided that: “Congress makes the following findings:
“(1) The collapse of communism in Eastern Europe and the dissolution of the Soviet Union have fundamentally changed the military threat that formed the basis for the national security policy of the United States since the end of World War II.
“(2) The change in the military threat presents a unique opportunity to restructure and reduce the military requirements of the United States.
“(3) As the United States proceeds with the post-Cold War defense build down, the Nation must recognize and address the impact of reduced defense spending on the military personnel, civilian employees, and defense industry workers who have been the foundation of the national defense policies of the United States.
“(4) The defense build down will have a significant impact on communities as procurements are reduced and military installations are closed and realigned.
“(5) Despite the changes in the military threat, the United States must maintain the capability to respond to regional conflicts that threaten the national interests of the United States, and to reconstitute forces in the event of an extended conflict.
“(6) The skills and capabilities of military personnel, civilian employees of the Department of Defense, defense industry workers, and defense industries represent an invaluable national resource that can contribute to the economic growth of the United States and to the long-term vitality of the national technology and industrial base.
“(7) Prompt and vigorous implementation of defense conversion, reinvestment, and transition assistance programs is essential to ensure that the defense build down is structured in a manner that—
“(A) enhances the long-term ability of the United States to maintain a strong and vibrant national technology and industrial base; and
“(B) promotes economic growth.”
Section 4201 of title XLII of div. D of Pub. L. 102–484 provided that: “The purposes of this title [see Tables for classification] are to consolidate, revise, clarify, and reenact policies and requirements, and to enact additional policies and requirements, relating to the national technology and industrial base, defense reinvestment, and defense conversion programs that further national security objectives.”
Section 4203(b) of Pub. L. 102–484 provided that until first national technology and industrial base assessment was submitted to Congress by Secretary of Defense pursuant to former section 2506(e) of this title, the term “defense critical technology” for purposes of this chapter, would have meaning given such term in section 2521 of this title, as in effect on day before Oct. 23, 1992.
1996—Pub. L. 104–201, div. A, title VIII, §829(g), Sept. 23, 1996, 110 Stat. 2614, added item 2504 and substituted “Department of Defense technology and industrial base policy guidance” for “National technology and industrial base: periodic defense capability plan” in item 2506.
Pub. L. 104–106, div. A, title X, §1081(i)(1), Feb. 10, 1996, 110 Stat. 455, substituted “National security objectives concerning national technology and industrial base” for “Congressional defense policy concerning national technology and industrial base, reinvestment, and conversion” in item 2501.
1993—Pub. L. 103–160, div. A, title XIII, §1312(a)(2), Nov. 30, 1993, 107 Stat. 1786, struck out item 2504 “Center for the Study of Defense Economic Adjustment”.
1 See References in Text note below.
(a)
(1) Supplying and equipping the force structure of the armed forces that is necessary to achieve—
(A) the objectives set forth in the national security strategy report submitted to Congress by the President pursuant to section 108 of the National Security Act of 1947 (50 U.S.C. 404a);
(B) the policy guidance of the Secretary of Defense provided pursuant to section 113(g) of this title; and
(C) the future-years defense program submitted to Congress by the Secretary of Defense pursuant to section 221 of this title.
(2) Sustaining production, maintenance, repair, and logistics for military operations of various durations and intensity.
(3) Maintaining advanced research and development activities to provide the armed forces with systems capable of ensuring technological superiority over potential adversaries.
(4) Reconstituting within a reasonable period the capability to develop and produce supplies and equipment, including technologically advanced systems, in sufficient quantities to prepare fully for a war, national emergency, or mobilization of the armed forces before the commencement of that war, national emergency, or mobilization.
(5) Providing for the development, manufacture, and supply of items and technologies critical to the production and sustainment of advanced military weapon systems within the national technology and industrial base.
(b)
(1) Relying, to the maximum extent practicable, upon the commercial national technology and industrial base that is required to meet the national security needs of the United States.
(2) Reducing the reliance of the Department of Defense on technology and industrial base sectors that are economically dependent on Department of Defense business.
(3) Reducing Federal Government barriers to the use of commercial products, processes, and standards.
(Added Pub. L. 102–484, div. D, title XLII, §4211, Oct. 23, 1992, 106 Stat. 2662; amended Pub. L. 103–35, title II, §201(c)(7), May 31, 1993, 107 Stat. 98; Pub. L. 103–160, div. A, title XI, §1182(a)(10), title XIII, §1313, Nov. 30, 1993, 107 Stat. 1771, 1786; Pub. L. 104–106, div. A, title X, §1081(a), Feb. 10, 1996, 110 Stat. 452; Pub. L. 104–201, div. A, title VIII, §829(a), Sept. 23, 1996, 110 Stat. 2612.)
A prior section 2501, added Pub. L. 100–456, div. A, title VIII, §821(b)(1)(B), Sept. 29, 1988, 102 Stat. 2014, related to centralized guidance, analysis, and planning, prior to repeal by Pub. L. 102–484, §4202(a).
Another prior section 2501 was renumbered section 2533 of this title.
1996—Pub. L. 104–106, §1081(a)(2), substituted “National security objectives concerning national technology and industrial base” for “Congressional defense policy concerning national technology and industrial base, reinvestment, and conversion” as section catchline.
Subsec. (a). Pub. L. 104–106, §1081(a)(1)(A)(i), substituted “National Security” for “Defense Policy” in heading.
Subsec. (a)(5). Pub. L. 104–201 added par. (5).
Pub. L. 104–106, §1081(a)(1)(A)(ii), struck out par. (5) which read as follows: “Furthering the missions of the Department of Defense through the support of policy objectives and programs relating to the defense reinvestment, diversification, and conversion objectives specified in subsection (b).”
Subsecs. (b), (c). Pub. L. 104–106, §1081(a)(1)(B), (C), redesignated subsec. (c) as (b) and struck out former subsec. (b) which stated policy objectives of Congress relating to defense reinvestment, diversification, and conversion.
1993—Subsec. (a)(1)(A). Pub. L. 103–35 substituted “section 108” for “section 104”.
Subsec. (a)(5). Pub. L. 103–160, §1313, added par. (5).
Subsec. (b)(2). Pub. L. 103–160, §1182(a)(10), substituted “that, by reducing the public sector demand for capital, increases the amount of capital available” for “and thereby free up capital”.
Pub. L. 109–163, div. A, title II, §253(c), Jan. 6, 2006, 119 Stat. 3180, provided that: “Whenever the Secretary of Defense provides for the conduct of a study referred to as a Technology Area Review and Assessment, the Secretary shall, not later than March 1 of the year following the year in which that study is conducted, submit to the congressional defense committees [Committees on Armed Services and Appropriations of the Senate and the House of Representatives] a report containing a summary of each such Technology Area Review and Assessment conducted during that year.”
Pub. L. 108–136, div. A, title VIII, subtitle B, part I, Nov. 24, 2003, 117 Stat. 1542, as amended by Pub. L. 109–364, div. A, title VIII, §841, Oct. 17, 2006, 120 Stat. 2335, provided that:
“No provision of this subtitle [subtitle B (§§811–828) of title VIII of div. A of Pub. L. 108–136, enacting section 2436 of this title, amending sections 2533a and 2534 of this title, and enacting provisions set out as notes under sections 2436, 2505, 2521, and 2534 of this title] or any amendment made by this subtitle shall apply to the extent the Secretary of Defense, in consultation with the Secretary of Commerce, the United States Trade Representative, and the Secretary of State, determines that it is inconsistent with United States obligations under an international agreement.
“(a)
“(A) the degree to which the United States is dependent on foreign sources of supply; and
“(B) the capabilities of the United States defense industrial base to produce military systems necessary to support the national security objectives set forth in section 2501 of title 10, United States Code.
“(2) For purposes of the assessment program, the Secretary shall use existing data, as required under subsection (b), and submit an annual report, as required under subsection (c).
“(b)
“(A) Whether the contractor is a United States or foreign contractor.
“(B) The principal place of business of the contractor and the principal place of performance of the contract.
“(C) Whether the contract was awarded on a sole source basis or after receipt of competitive offers.
“(D) The dollar value of the contract.
“(2) The Federal Procurement Data System described in section 6(d)(4)(A) of the Office of Federal Procurement Policy Act (41 U.S.C. 405(d)(4)(A)), or any successor system, shall collect from contracts described in paragraph (1) the information specified in that paragraph.
“(3) Information obtained in the implementation of this section is subject to the same limitations on disclosure, and penalties for violation of such limitations, as is provided under section 2507 of title 10, United States Code. Such information also shall be exempt from release under section 552 of title 5, United States Code.
“(4) For purposes of meeting the requirements set forth in this section, the Secretary of Defense may not require the provision of information beyond the information that is currently provided to the Department of Defense through existing data collection systems by non-Federal entities with respect to contracts and subcontracts with the Department of Defense or any military department.
“(c)
“(2)(A) The report shall include the following with respect to contracts described in subsection (b):
“(i) The total number and value of such contracts awarded by the Department of Defense.
“(ii) The total number and value of such contracts awarded on a sole source basis.
“(iii) The total number and value of contracts described in clause (ii) awarded to foreign contractors, summarized by country.
“(iv) The total number and value of contracts awarded to foreign contractors through competitive procedures, summarized by country.
“(v) The dollar value of any articles, materials, or supplies purchased that were manufactured outside of the United States.
“(vi) An itemized list of all waivers granted with respect to such articles, materials, or supplies under the Buy American Act (41 U.S.C. 10a et seq.).
“(vii) A summary of—
“(I) the total procurement funds expended on articles, materials, and supplies manufactured inside the United States; and
“(II) the total procurement funds expended on articles, materials, and supplies manufactured outside the United States.
“(B) The report also shall include—
“(i) the status of the matters described in subparagraphs (A) and (B) of subsection (a)(1);
“(ii) the status of implementation of successor procurement data management systems; and
“(iii) such other matters as the Secretary considers appropriate.
“(d)
“(e)
“(a)
“(A) the essential items, assemblies, and components of the system that are active items, assemblies, and components;
“(B) foreign and domestic sources of supply for active items, assemblies, and components of the system;
“(C) the active items, assemblies, and components of the system that are commercial; and
“(D) Federal Supply Class and North American Industry Classification System Codes for active items, assemblies, and components of the system.
“(2) Any modification to the logistics management system or any successor system of the Department of Defense shall maintain the capability to identify—
“(A) essential items, assemblies, and components described in paragraph (1)(A);
“(B) foreign and domestic sources of supply for active items, assemblies, and components;
“(C) the active items, assemblies, and components of the system that are commercial; and
“(D) Federal Supply Class and North American Industry Classification System Codes for active items, assemblies, and components.
“(3) For purposes of meeting the requirements set forth in this section, the Secretary of Defense may not require the provision of information beyond the information that is currently provided to the Department of Defense through existing data collection systems by non-Federal entities with respect to contracts and subcontracts with the Department of Defense or any military department.
“(b)
“(c)
“(1) assesses the criteria that should be used for identifying whether an item, assembly, or component is essential to a military system; and
“(2) recommends which items, assemblies, and components should be included on the military system essential item breakout list under subsection (b).
“(d)
“(2) The report shall include the following:
“(A) A list of each military system covered by the process established under subsection (a).
“(B) A list of the items, assemblies, and components on the military system essential item breakout list that are manufactured or produced outside the United States, setting forth military and commercial separately.
“(C) The portion of the entire military system essential item breakout list that consists of the items, assemblies, and components listed under subparagraph (B) (stated as a percentage).
“(D) A list of each Federal Supply Class and North American Industry Classification System Code represented on the military system essential item breakout list, and the portion of the entire military system essential item breakout list that consists of items, assemblies, or components in such classes or codes (stated as a percentage).
“(E) A list of each country outside the United States where the items, assemblies, and components listed under subparagraph (B) are manufactured or produced, and the portion of the entire military system essential item breakout list that consists of—
“(i) the items, assemblies, or components manufactured or produced in that country, setting forth military and commercial separately (stated as a percentage); and
“(ii) the Federal Supply Classes and North American Industry Classification System Codes represented by those items, assemblies, or components (stated as a percentage).
“(3) The Secretary shall submit an interim version of the report required by this subsection not later than February 1, 2005, containing as much information as is practicable to be included by such date.
“(a)
“(b)
“(c)
“(d)
“(e)
“(f)
“(1) ensuring the visibility and accountability of transactions engaged in through the Fund; and
“(2) reporting to Congress each year regarding activities of the Fund during the previous fiscal year.”
Pub. L. 107–107, div. A, title II, subtitle D, Dec. 28, 2001, 115 Stat. 1041, provided that:
“This subtitle may be cited as the ‘Air Force Science and Technology for the 21st Century Act’.
“(a)
“(1) Continue and improve efforts to ensure that—
“(A) the Air Force science and technology community is represented, and the recommendations of that community are considered, at all levels of program planning and budgetary decisionmaking within the Air Force;
“(B) advocacy for science and technology development is institutionalized across all levels of Air Force management in a manner that is not dependent on individuals; and
“(C) the value of Air Force science and technology development is made increasingly apparent to the warfighters, by linking the needs of those warfighters with decisions on science and technology development.
“(2) Complete and adopt a policy directive that provides for changes in how the Air Force makes budgetary and nonbudgetary decisions with respect to its science and technology development programs and how it carries out those programs.
“(3) At least once every five years, conduct a review of the long-term challenges and short-term objectives of the Air Force science and technology programs that is consistent with the review specified in section 252 of the Floyd D. Spence National Defense Authorization Act for Fiscal Year 2001 (as enacted into law by Public Law 106–398; 114 Stat. 1654A–46 [set out as a note below]).
“(4) Ensure that development and science and technology planning and investment activities are carried out for future space warfighting systems and for future nonspace warfighting systems in an integrated manner.
“(5) Elevate the position within the Office of the Secretary of the Air Force that has primary responsibility for budget and policy decisions for science and technology programs.
“(b)
“(A) Coordinating the needs of Air Force warfighters with decisions on science and technology development.
“(B) Giving input into the establishment of priorities among science and technology programs.
“(C) Analyzing Air Force capability options for the allocation of Air Force resources.
“(D) Developing concepts for technology, warfighting systems, and operations with which the Air Force can achieve its critical future goals.
“(E) Evaluating concepts for systems and operations that leverage technology across Air Force organizational boundaries.
“(F) Ensuring that a ‘system-of-systems’ approach is used in carrying out the various Air Force capability planning exercises.
“(G) Utilizing existing analysis capabilities within the Air Force product centers in a collaborative and integrated manner.
“(2) Not later than one year after the date of the enactment of this Act [Dec. 28, 2001], the Secretary of the Air Force shall submit to Congress a report on the implementation of the planning process required by paragraph (1). The report shall include the annual amount that the Secretary considers necessary to carry out paragraph (1).
“(a)
“(b)
“(A) That the concerns about the management of the science and technology program that have been raised by Congress, the Defense Science Board, the Air Force Science Advisory Board, and the Air Force Association have been adequately addressed.
“(B) That appropriate and sufficient technology is available to ensure the military superiority of the United States and counter future high-risk threats.
“(C) That the science and technology investments are balanced to meet the near-, mid-, and long-term needs of the Air Force.
“(D) That technologies are made available that can be used to respond flexibly and quickly to a wide range of future threats.
“(E) That the Air Force organizational structure provides for a sufficiently senior level advocate of science and technology to ensure an ongoing, effective presence of the science and technology community during the budget and planning process.
“(2) In addition, the study shall assess the specific changes to the Air Force science and technology program as follows:
“(A) Whether the biannual science and technology summits provide sufficient visibility into, and understanding and appreciation of, the value of the science and technology program to the senior level of Air Force budget and policy decisionmakers.
“(B) Whether the applied technology councils are effective in contributing the input of all levels beneath the senior leadership into the coordination, focus, and content of the science and technology program.
“(C) Whether the designation of the commander of the Air Force Materiel Command as the science and technology budget advocate is effective to ensure that an adequate Air Force science and technology budget is requested.
“(D) Whether the revised development planning process is effective to aid in the coordination of the needs of the Air Force warfighters with decisions on science and technology investments and the establishment of priorities among different science and technology programs.
“(E) Whether the implementation of section 252 of the Floyd D. Spence National Defense Authorization Act for Fiscal Year 2001 (as enacted into law by Public Law 106–398; 114 Stat. 1654A–46 [set out as a note below]) is effective to identify the basis for the appropriate science and technology program funding level and investment portfolio.
“(c)
Pub. L. 106–398, §1 [[div. A], title II, §252], Oct. 30, 2000, 114 Stat. 1654, 1654A–46, provided that:
“(a)
“(b)
“(1) An assessment of the budgetary resources that are being used for fiscal year 2001 for addressing the long-term challenges and the short-term objectives of the Air Force science and technology programs.
“(2) The budgetary resources that are necessary to address those challenges and objectives adequately.
“(3) A course of action for each projected or ongoing Air Force science and technology program that does not address either the long-term challenges or the short-term objectives.
“(4) The matters required under subsection (c)(5) and (d)(6).
“(c)
“(2) The team shall solicit views from the entire Air Force science and technology community on the matters under consideration by the team.
“(3) The team—
“(A) shall select for consideration science and technology challenges that involve—
“(i) compelling requirements of the Air Force;
“(ii) high-risk, high-payoff areas of exploration; and
“(iii) very difficult, but probably achievable, results; and
“(B) should not select a linear extension of any ongoing Air Force science and technology program for consideration as a science and technology challenge under subparagraph (A).
“(4) The Deputy Assistant Secretary of the Air Force for Science, Technology, and Engineering shall designate a technical coordinator and a management coordinator for each science and technology challenge identified pursuant to this subsection. Each technical coordinator shall have sufficient expertise in fields related to the challenge to be able to identify other experts in such fields and to affirm the credibility of the challenge. The coordinator for a science and technology challenge shall conduct workshops within the relevant scientific and technological community to obtain suggestions for possible approaches to addressing the challenge and to identify ongoing work that addresses the challenge, deficiencies in current work relating to the challenge, and promising areas of research.
“(5) In carrying out subsection (a), the Secretary of the Air Force shall review the science and technology challenges identified pursuant to this subsection and, for each such challenge, at a minimum—
“(A) consider the results of the workshops conducted pursuant to paragraph (4); and
“(B) identify any work not currently funded by the Air Force that should be performed to meet the challenge.
“(d)
“(2) The task force shall solicit views from the entire Air Force requirements community, user community, and acquisition community.
“(3) The task force shall select for consideration short-term objectives that involve—
“(A) compelling requirements of the Air Force;
“(B) support in the user community; and
“(C) likely attainment of the desired benefits within a five-year period.
“(4) The Deputy Assistant Secretary of the Air Force for Science, Technology, and Engineering shall establish an integrated product team for each short-term objective identified pursuant to this subsection. Each integrated product team shall include representatives of the requirements community, the user community, and the science and technology community with relevant expertise.
“(5) The integrated product team for a short-term objective shall be responsible for—
“(A) identifying, defining, and prioritizing the enabling capabilities that are necessary for achieving the objective;
“(B) identifying deficiencies in the enabling capabilities that must be addressed if the short-term objective is to be achieved; and
“(C) working with the Air Force science and technology community to identify science and technology projects and programs that should be undertaken to eliminate each deficiency in an enabling capability.
“(6) In carrying out subsection (a), the Secretary of the Air Force shall review the short-term science and technology objectives identified pursuant to this subsection and, for each such objective, at a minimum—
“(A) consider the work of the integrated product team conducted pursuant to paragraph (5); and
“(B) identify the science and technology work of the Air Force that should be undertaken to eliminate each deficiency in enabling capabilities that is identified by the integrated product team pursuant to subparagraph (B) of that paragraph.
“(e)
“(2) Immediately upon completing the review required by subsection (a), the Secretary of Defense shall notify the Comptroller General of the completion of the review. For the purposes of paragraph (1), the date of the notification shall be considered the date of the completion of the review.”
Pub. L. 106–65, div. A, title II, §243, Oct. 5, 1999, 113 Stat. 551, required the Under Secretary of Defense for Acquisition, Technology, and Logistics to submit to the congressional defense committees a report on the actions necessary to promote the research base and technological development needed for ensuring that the Armed Forces had the military capabilities necessary for meeting national security requirements over the next two to three decades.
Pub. L. 106–65, div. A, title II, §212, Oct. 5, 1999, 113 Stat. 542, as amended by Pub. L. 108–136, div. A, title X, §1031(h)(1), Nov. 24, 2003, 117 Stat. 1604; Pub. L. 109–364, div. A, title II, §217, Oct. 17, 2006, 120 Stat. 2125, provided that:
“(a)
“(b)
“(c)
“(1) a detailed, prioritized list, including estimates of required funding, of highly-rated science and technology projects received by the Department through competitive solicitations and broad agency announcements which—
“(A) are not funded solely due to lack of resources, but
“(B) represent science and technology opportunities that support the research and development programs and goals of the military departments and the Defense Agencies; and
“(2) a report, in both classified and unclassified form, containing an analysis and evaluation of international research and technology capabilities, including an identification of any technology areas in which the United States may not have global technical leadership within the next 10 years, in each of the technology areas described in the following plans:
“(A) The most current Joint Warfighting Science and Technology Plan required by section 270 of the National Defense Authorization Act for Fiscal Year 1997 [Pub. L. 104–201] (10 U.S.C. 2501 note).
“(B) The Defense Technology Area Plan of the Department of Defense.
“(C) The Basic Research Plan of the Department of Defense.”
Pub. L. 105–261, div. A, title II, §214, Oct. 17, 1998, 112 Stat. 1948, provided that:
“(a)
“(b)
“(1)
“(A) The sustainment of research capabilities in scientific and engineering disciplines critical to the Department of Defense.
“(B) The education and training of the next generation of scientists and engineers in disciplines that are relevant to future defense systems, particularly through the conduct of basic research.
“(C) The continued support of the Defense Experimental Program to Stimulate Competitive Research and research programs at historically black colleges and universities and minority institutions.
“(2)
“(B) It is the sense of Congress that funds made available for projects and programs of the Defense Science and Technology Program should be used only for the benefit of the Department of Defense, which includes—
“(i) the development of technology that has only military applications;
“(ii) the development of militarily useful, commercially viable technology; and
“(iii) the adaptation of commercial technology, products, or processes for military purposes.
“(3)
“(4)
“(A) management and funding for the Defense Science and Technology Program for each military department should receive a level of priority and leadership attention equal to the level received by program acquisition, and the Secretary of each military department should ensure that a senior official in the department holds the appropriate title and responsibility to ensure effective oversight and emphasis on science and technology;
“(B) to ensure an appropriate long-term focus for investments, a sufficient percentage of science and technology funds should be directed toward new technology areas, and annual reviews should be conducted for ongoing research areas to ensure that those funded initiatives are either integrated into acquisition programs or discontinued when appropriate;
“(C) the Secretary of each military department should take appropriate steps to ensure that sufficient numbers of officers and civilian employees in the department hold advanced degrees in technical fields; and
“(D) of particular concern, the Secretary of the Air Force should take appropriate measures to ensure that sufficient numbers of scientists and engineers are maintained to address the technological challenges faced in the areas of air, space, and information technology.
“(c)
“(1)
“(2)
“(A) result in recommendations on the minimum requirements for maintaining a technology base that is sufficient, based on both historical developments and future projections, to project superiority in air and space weapons systems and in information technology;
“(B) address the effects on national defense and civilian aerospace industries and information technology of reducing funding below the goal described in subsection (a); and
“(C) result in recommendations on the appropriate levels of staff with baccalaureate, masters, and doctorate degrees, and the optimal ratio of civilian and military staff holding such degrees, to ensure that science and technology functions of the Department of Defense remain vital.
“(3)
“(d)
“(1) The term ‘Defense Science and Technology Program’ means basic and applied research and advanced development.
“(2) The term ‘basic and applied research’ means work funded in program elements for defense research and development under Department of Defense category 6.1 or 6.2.
“(3) The term ‘advanced development’ means work funded in program elements for defense research and development under Department of Defense category 6.3.”
Pub. L. 104–201, div. A, title II, §270, Sept. 23, 1996, 110 Stat. 2469, as amended by Pub. L. 106–65, div. A, title II, §242, title X, §1067(5), Oct. 5, 1999, 113 Stat. 551, 774; Pub. L. 109–163, div. A, title II, §253(a), (b), Jan. 6, 2006, 119 Stat. 3179, 3180, provided that:
“Not later than March 1 of each even-numbered year, the Secretary of Defense shall submit to the Committee on Armed Services of the Senate and the Committee on Armed Services of the House of Representatives a plan for ensuring that the science and technology program of the Department of Defense supports the development of the future joint warfighting capabilities identified as priority requirements for the Armed Forces.
Section 808 of Pub. L. 104–106 authorized Secretary of Defense to enter into agreements with defense contractors under which certain cost reimbursement rules would be applied and required submission of report to congressional defense committees not later than one year after Feb. 10, 1996, prior to repeal by Pub. L. 105–85, div. A, title X, §1027(d), Nov. 18, 1997, 111 Stat. 1880. See section 7315 of this title.
Pub. L. 103–337, div. A, title XI, §1118, Oct. 5, 1994, 108 Stat. 2870, provided that: “At the time of the award for a cooperative agreement or other transaction under a program carried out under chapter 148 of title 10, United States Code, the head of the agency concerned shall include in the file pertaining to such agreement or transaction a brief explanation of the manner in which the award advances and enhances a particular national security objective set forth in section 2501(a) of such title or a particular policy objective set forth in [former] section 2501(b) of such title.”
Pub. L. 103–160, div. A, title XIII, §1303, Nov. 30, 1993, 107 Stat. 1784, provided that during each of the fiscal years 1994, 1995, and 1996, the Secretary of Defense was to prepare a report that assessed the effectiveness of all defense conversion, reinvestment, and transition assistance programs, as defined in section 1302 of Pub. L. 103–160, 107 Stat. 1783, during the preceding fiscal year.
Sections 1351 to 1354 of Pub. L. 103–160, as amended by Pub. L. 104–201, div. A, title X, §1073(e)(1)(F), (2)(B), (3), Sept. 23, 1996, 110 Stat. 2658, provided that:
“This subtitle [subtitle D, §§1351–1363 of title XIII of div. A of Pub. L. 103–160, enacting sections 1279d, 1279e, and 1280a of the Appendix to Title 46, Shipping, amending section 31326 of Title 46 and sections 1271, 1273, 1274, and 1274a of the Appendix to Title 46, and enacting provisions set out as notes under sections 1279b and 1279d of the Appendix to Title 46] may be cited as the ‘National Shipbuilding and Shipyard Conversion Act of 1993’.
“(a)
“(b)
“(1) by the Secretary of Defense, with respect to programs under the jurisdiction of the Secretary of Defense; and
“(2) by the Secretary of Transportation, with respect to programs under the jurisdiction of the Secretary of Transportation.
“(c)
“(1)
“(2)
“(3)
“(4)
“The Secretary of Defense shall designate the Defense Advanced Research Projects Agency of the Department of Defense as the lead agency of the Department of Defense for activities of the Department of Defense which are part of the National Shipbuilding Initiative program. Those activities shall be carried out as part of defense conversion activities of the Department of Defense.
“(a) DARPA
“(1) Consultation with the Maritime Administration, the Office of Economic Adjustment, the National Economic Council, the National Shipbuilding Research Project, the Coast Guard, the National Oceanic and Atmospheric Administration, appropriate naval commands and activities, and other appropriate Federal agencies on—
“(A) development and transfer to the private sector of dual-use shipbuilding technologies, ship repair technologies, and shipbuilding management technologies;
“(B) assessments of potential markets for maritime products; and
“(C) recommendation of industrial entities, partnerships, joint ventures, or consortia for short- and long-term manufacturing technology investment strategies.
“(2) Funding and program management activities to develop innovative design and production processes and the technologies required to implement those processes.
“(3) Facilitation of industry and Government technology development and technology transfer activities (including education and training, market assessments, simulations, hardware models and prototypes, and national and regional industrial base studies).
“(4) Integration of promising technology advances made in the Technology Reinvestment Program of the Defense Advanced Research Projects Agency into the National Shipbuilding Initiative to effect full defense conversion potential.
“(b)
“(1)
“(2)
[For transfer of authorities, functions, personnel, and assets of the Coast Guard, including the authorities and functions of the Secretary of Transportation relating thereto, to the Department of Homeland Security, and for treatment of related references, see sections 468(b), 551(d), 552(d), and 557 of Title 6, Domestic Security, and the Department of Homeland Security Reorganization Plan of November 25, 2002, as modified, set out as a note under section 542 of Title 6.]
Subtitle H of title I of div. A of Pub. L. 102–484, as amended by Pub. L. 103–35, title II, §202(a)(1), May 31, 1993, 107 Stat. 100; Pub. L. 103–337, div. A, title XI, §1141(a), (b), Oct. 5, 1994, 108 Stat. 2879; Pub. L. 104–201, div. A, title I, §143, Sept. 23, 1996, 110 Stat. 2449; Pub. L. 105–261, div. A, title I, §115, Oct. 17, 1998, 112 Stat. 1939; Pub. L. 106–65, div. A, title I, §116, Oct. 5, 1999, 113 Stat. 533, known as the “Armament Retooling and Manufacturing Support Act of 1992”, authorized the Secretary of the Army, during fiscal years 1993 through 2001, to carry out the Armament Retooling and Manufacturing Support Initiative, prior to repeal by Pub. L. 106–398, §1 [[div. A], title III, §344(d)], Oct. 30, 2000, 114 Stat. 1654, 1654A–71.
Section 4218 of Pub. L. 102–484 related to collection of information, completion of assessments, and issuance of plans required by this subchapter, prior to repeal by Pub. L. 104–201, div. A, title VIII, §829(h), Sept. 23, 1996, 110 Stat. 2614.
Section 4239 of Pub. L. 102–484 provided that: “Not later than 120 days after the date of enactment of this Act [Oct. 23, 1992], the Secretary of Defense shall prescribe regulations to encourage defense contractors to engage in industrial diversification planning.”
Section 4471 of Pub. L. 102–484, as amended by Pub. L. 103–160, div. A, title XIII, §1372, Nov. 20, 1993, 107 Stat. 1817; Pub. L. 103–337, div. A, title XI, §1142, Oct. 5, 1994, 108 Stat. 2881; Pub. L. 104–201, div. A, title VIII, §824, Sept. 23, 1996, 110 Stat. 2610; Pub. L. 105–85, div. A, title X, §1073(d)(2)(C), Nov. 18, 1997, 111 Stat. 1905; Pub. L. 105–277, div. A, §101(f) [title VIII, §405(d)(7)(C), (f)(6)(C)], Oct. 21, 1998, 112 Stat. 2681–337, 2681–419, 2681–430, provided that:
“(a)
“(1) shall identify each contract (if any) under major defense programs of the Department of Defense that will be terminated or substantially reduced as a result of the funding levels provided in that Act; and
“(2) shall ensure that notice of the termination of, or substantial reduction in, the funding of the contract is provided—
“(A) directly to the prime contractor under the contract; and
“(B) directly to the Secretary of Labor.
“(b)
“(1) provide notice of that termination or substantial reduction to each person that is a first-tier subcontractor under that prime contract for subcontracts in an amount not less than $500,000; and
“(2) require that each such subcontractor—
“(A) provide such notice to each of its subcontractors for subcontracts in an amount in excess of $100,000; and
“(B) impose a similar notice and pass through requirement to subcontractors in an amount in excess of $100,000 at all tiers.
“(c)
“(1)(A) each representative of employees whose work is directly related to the defense contract under such program and who are employed by the defense contractor; or
“(B) if there is no such representative at that time, each such employee; and
“(2) the State or entity designated by the State to carry out rapid response activities under section 134(a)(2)(A) of the Workforce Investment Act of 1998 [29 U.S.C. 2864(a)(2)(A)], and the chief elected official of the unit of general local government within which the adverse effect may occur.
“(d)
“(e)
“(f)
“(1) The term ‘major defense program’ means a program that is carried out to produce or acquire a major system (as defined in section 2302(5) of title 10, United States Code).
“(2) The terms ‘substantial reduction’ and ‘substantially reduced’, with respect to a defense contract under a major defense program, mean a reduction of 25 percent or more in the total dollar value of the funds obligated by the contract.”
(a)
(b)
(1) The Secretary of Defense, who shall serve as chairman.
(2) The Secretary of Energy.
(3) The Secretary of Commerce.
(4) The Secretary of Labor.
(5) Such other officials as may be determined by the President.
(c)
(1) the capabilities of the national technology and industrial base to meet the national security objectives set forth in section 2501(a) of this title;
(2) programs for achieving such national security objectives; and
(3) changes in acquisition policy that strengthen the national technology and industrial base.
(d)
(Added Pub. L. 102–484, div. D, title XLII, §4212(a), Oct. 23, 1992, 106 Stat. 2664; amended Pub. L. 103–160, div. A, title XIII, §1312(b), Nov. 30, 1993, 107 Stat. 1786; Pub. L. 103–337, div. A, title X, §1070(a)(12), Oct. 5, 1994, 108 Stat. 2856; Pub. L. 104–106, div. A, title X, §1081(b), Feb. 10, 1996, 110 Stat. 452; Pub. L. 104–201, div. A, title VIII, §829(c)(2), formerly §829(c)(2), (3), Sept. 23, 1996, 110 Stat. 2613, renumbered Pub. L. 105–85, div. A, title X, §1073(c)(7)(B), Nov. 18, 1997, 111 Stat. 1904; Pub. L. 105–85, div. A, title X, §1073(c)(7)(A), Nov. 18, 1997, 111 Stat. 1904.)
A prior section 2502, added Pub. L. 100–456, div. A, title VIII, §821(b)(1)(B), Sept. 29, 1988, 102 Stat. 2015, related to defense industrial base policies, prior to repeal by Pub. L. 102–484, §4202(a).
Another prior section 2502 was renumbered section 2534 of this title.
1997—Subsec. (c). Pub. L. 105–85, §1073(c)(7)(A), made technical correction to directory language of Pub. L. 104–201, §829(c)(2). See 1996 Amendment note below.
1996—Subsec. (c). Pub. L. 104–201, §829(c)(2), formerly §829(c)(2), (3), as renumbered and amended by Pub. L. 105–85, substituted “the responsibility to ensure effective cooperation” for “the following responsibilities:”, struck out “(1) To ensure the effective cooperation” before “among departments”, struck out par. (2), redesignated subpars. (A), (B), and (C) as pars. (1), (2), and (3), respectively, and adjusted margins of such pars. Prior to repeal, par. (2) read as follows: “To prepare the periodic assessment and the periodic plan required by sections 2505 and 2506 of this title, respectively.”
Subsec. (c)(1)(B). Pub. L. 104–106, §1081(b)(1), added subpar. (B) and struck out former subpar. (B) which read as follows: “programs for achieving, during a period of reduction in defense expenditures, the defense reinvestment, diversification, and conversion objectives set forth in section 2501(b) of this title; and”.
Subsec. (c)(2), (3). Pub. L. 104–106, §1081(b)(2), (3), redesignated par. (3) as (2) and struck out former par. (2) which read as follows: “To provide overall policy guidance to ensure effective implementation by agencies of the Federal Government of defense reinvestment and conversion activities during a period of reduction in defense expenditures.”
1994—Subsec. (d). Pub. L. 103–337 substituted “executive” for “Executive”.
1993—Subsec. (d). Pub. L. 103–160 added subsec. (d).
Section 1073(c) of Pub. L. 105–85 provided that the amendment made by that section is effective as of Sept. 23, 1996, and as if included in the National Defense Authorization Act for Fiscal Year 1997, Pub. L. 104–201, as enacted.
(a)
(b)
(c)
(1) The assembly of timely and authoritative information.
(2) Initiation of studies and analyses.
(3) Provision of technical support and assistance to—
(A) the Secretary of Defense for the preparation of the periodic assessments required by section 2505 of this title;
(B) the defense acquisition university structure and its elements; and
(C) other departments and agencies of the Federal Government in accordance with guidance established by the Council.
(4) Dissemination, through the National Technical Information Service of the Department of Commerce, of unclassified information and assessments for further dissemination within the Federal Government and to the private sector.
(Added Pub. L. 102–484, div. D, title XLII, §4213(a), Oct. 23, 1992, 106 Stat. 2665; amended Pub. L. 104–201, div. A, title VIII, §829(b), Sept. 23, 1996, 110 Stat. 2612; Pub. L. 107–107, div. A, title X, §1048(b)(4), Dec. 28, 2001, 115 Stat. 1225.)
A prior section 2503, added Pub. L. 100–456, div. A, title VIII, §821(b)(1)(B), Sept. 29, 1988, 102 Stat. 2016; amended Pub. L. 101–189, div. A, title VIII, §842(a), (b), Nov. 29, 1989, 103 Stat. 1514, 1515; Pub. L. 102–25, title VII, §701(f)(4), Apr. 6, 1991, 105 Stat. 115; Pub. L. 102–484, div. A, title X, §1052(32), Oct. 23, 1992, 106 Stat. 2501, established defense industrial base office, prior to repeal by Pub. L. 102–484, §4202(a).
2001—Subsec. (b). Pub. L. 107–107 substituted “Under Secretary of Defense for Acquisition, Technology, and Logistics” for “Under Secretary of Defense for Acquisition”.
1996—Subsec. (a). Pub. L. 104–201, §829(b)(1), substituted “The Secretary of Defense” for “(1) The Secretary of Defense, in consultation with the National Defense Technology and Industrial Base Council,” and struck out pars. (2) to (4) which read as follows:
“(2) As determined by the Secretary of Defense, the program shall be administered by one of the following:
“(A) An existing federally funded research and development center.
“(B) A consortium of existing federally funded research and development centers and other nonprofit entities.
“(C) A private sector entity (other than a federally funded research and development center).
“(D) The National Defense University.
“(3) A contract may be awarded under subparagraph (A), (B), or (C) of paragraph (2) only through the use of competitive procedures.
“(4) The Secretary of Defense shall ensure that there is appropriate coordination between the program and the Critical Technologies Institute.”
Subsec. (c)(3)(A). Pub. L. 104–201, §829(b)(2), substituted “the Secretary of Defense for” for “the National Defense Technology and Industrial Base Council in” and struck out “and the periodic plans required by section 2506 of this title” after “section 2505 of this title”.
Section 4213(b) of Pub. L. 102–484 provided that: “The Secretary of Defense shall establish the program required by section 2503 of title 10, United States Code, as added by subsection (a), not later than six months after the date of the enactment of this Act [Oct. 23, 1992]. The Secretary of Defense shall ensure that a contract solicitation is issued and a contract is awarded in a timely manner to facilitate the establishment of that program within the period set forth in the preceding sentence. The preceding sentence shall not apply if the Secretary determines that the program shall be administered by the National Defense University.”
The Secretary of Defense shall transmit to the Committee on Armed Services of the Senate and the Committee on Armed Services of the House of Representatives by March 1 of each year a report which shall include the following information:
(1) A description of the departmental guidance prepared pursuant to section 2506 of this title.
(2) A description of the methods and analyses being undertaken by the Department of Defense alone or in cooperation with other Federal agencies, to identify and address concerns regarding technological and industrial capabilities of the national technology and industrial base.
(3) A description of the assessments prepared pursuant to section 2505 of this title and other analyses used in developing the budget submission of the Department of Defense for the next fiscal year.
(4) Identification of each program designed to sustain specific essential technological and industrial capabilities and processes of the national technology and industrial base.
(Added Pub. L. 104–201, div. A, title VIII, §829(e), Sept. 23, 1996, 110 Stat. 2614; amended Pub. L. 106–65, div. A, title X, §1067(1), Oct. 5, 1999, 113 Stat. 774.)
A prior section 2504, added Pub. L. 102–484, div. D, title XLII, §4214(a), Oct. 23, 1992, 106 Stat. 2666, established Center for Study of Defense Economic Adjustment, prior to repeal by Pub. L. 103–160, div. A, title XIII, §1312(a)(1), Nov. 30, 1993, 107 Stat. 1786.
Another prior section 2504 was renumbered section 2531 of this title.
1999—Pub. L. 106–65 substituted “and the Committee on Armed Services” for “and the Committee on National Security” in introductory provisions.
(a)
(b)
(1) describe sectors or capabilities, their underlying infrastructure and processes;
(2) analyze present and projected financial performance of industries supporting the sectors or capabilities in the assessment; and
(3) identify technological and industrial capabilities and processes for which there is potential for the national industrial and technology base not to be able to support the achievement of national security objectives.
(c)
(1) identify cases that pose an unacceptable risk of foreign dependency, as determined by the Secretary; and
(2) present actions being taken or proposed to be taken to remedy the risk posed by the cases identified under paragraph (1), including efforts to develop a domestic source for the item in question.
(d)
(Added Pub. L. 102–484, div. D, title XLII, §4215, Oct. 23, 1992, 106 Stat. 2667; amended Pub. L. 103–35, title II, §201(g)(7), May 31, 1993, 107 Stat. 100; Pub. L. 104–201, div. A, title VIII, §829(c)(1), Sept. 23, 1996, 110 Stat. 2612.)
A prior section 2505 was renumbered section 2532 of this title.
1996—Pub. L. 104–201 reenacted section catchline without change and amended text generally. Prior to amendment, text consisted of subsecs. (a) to (d) providing for National Defense Technology and Industrial Base Council to prepare, at least annually through fiscal year 1997 and biennially thereafter, a comprehensive assessment of capability of the national technology and industrial base to attain national security objectives.
1993—Pub. L. 103–35 substituted “capability” for “capabilty” in section catchline.
Pub. L. 108–136, div. A, title VIII, §824, Nov. 24, 2003, 117 Stat. 1547, required the Secretary of Defense to conduct a study of the adequacy of the industrial base of the United States to meet defense requirements of the United States for beryllium and to submit a report on the results of the study to Congress not later than Mar. 31, 2005.
Section 4219 of Pub. L. 102–484, as amended by Pub. L. 103–35, title II, §202(a)(14), May 31, 1993, 107 Stat. 101, set forth requirements for the initial regulations prescribed to implement this section, prior to repeal by Pub. L. 104–201, div. A, title VIII, §829(h), Sept. 23, 1996, 110 Stat. 2614.
(a)
(b)
(Added Pub. L. 102–484, div. D, title XLII, §4216(a), Oct. 23, 1992, 106 Stat. 2668; amended Pub. L. 104–201, div. A, title VIII, §829(d), Sept. 23, 1996, 110 Stat. 2613.)
A prior section 2506 was renumbered section 2533 of this title.
1996—Pub. L. 104–201 substituted “Department of Defense technology and industrial base policy guidance” for “National technology and industrial base: periodic defense capability plan” in section catchline and amended text generally. Prior to amendment, text consisted of subsecs. (a) to (e) providing for the National Defense Technology and Industrial Base Council to prepare, at least annually through fiscal year 1997 and biennially thereafter, a multiyear plan for ensuring that the policies and programs of the Department of Defense, the Department of Energy, and other Federal departments and agencies were planned, coordinated, funded, and implemented in a manner designed to attain national security objectives.
Section 4220 of Pub. L. 102–484 set forth requirements for the initial regulations prescribed to implement this section, prior to repeal by Pub. L. 104–201, div. A, title VIII, §829(h), Sept. 23, 1996, 110 Stat. 2614.
(a)
(b)
(c)
(d)
(e)
(f)
(1) The term “person” includes an individual, corporation, partnership, association, or any other organized group of persons, or legal successor or representative of the foregoing, and includes the United States or any agency thereof, or any other government, or any of its political subdivisions, or any agency of any of the foregoing, except that no punishment provided by this section shall apply to the United States, or to any such government, political subdivision, or government agency.
(2) The term “national defense” means programs for military and atomic energy production or construction, military assistance to any foreign nation, stockpiling, space, and directly related activity.
(Added Pub. L. 102–484, div. D, title XLII, §4217, Oct. 23, 1992, 106 Stat. 2670; amended Pub. L. 103–160, div. A, title XI, §1182(b)(1), Nov. 30, 1993, 107 Stat. 1772; Pub. L. 109–163, div. A, title X, §1056(c)(5), Jan. 6, 2006, 119 Stat. 3439.)
A prior section 2507 was renumbered section 2534 of this title.
A prior section 2508 was renumbered section 2522 of this title and subsequently repealed.
A prior section 2509, added Pub. L. 101–510, div. A, title VIII, §825(a), Nov. 5, 1990, 104 Stat. 1604; amended Pub. L. 102–484, div. A, title X, §1052(34), Oct. 23, 1992, 106 Stat. 2501, required submission of defense industrial base annual reports, prior to repeal by Pub. L. 102–484, §4202(a).
A prior section 2510, added Pub. L. 101–510, div. A, title VIII, §826(a)(1), Nov. 5, 1990, 104 Stat. 1605, related to defense industrial base for textile and apparel products, prior to repeal by Pub. L. 102–484, §4202(a).
2006—Subsec. (d). Pub. L. 109–163 substituted “subsection (a)” for “section (a)”.
1993—Pub. L. 103–160 inserted headings in subsecs. (a) to (f).
1996—Pub. L. 104–106, div. A, title X, §1081(i)(2), Feb. 10, 1996, 110 Stat. 455, substituted “program” for “partnerships” in item 2511 and struck out items 2512 “Commercial-military integration partnerships”, 2513 “Regional technology alliances assistance program”, 2516 “Military-Civilian Integration and Technology Transfer Advisory Board”, and 2520 “Navy Reinvestment Program”.
1994—Pub. L. 103–337, div. A, title XI, §1113(c), Oct. 5, 1994, 108 Stat. 2866, added items 2519 and 2520.
(a)
(b)
(c)
(2) The Secretary may prescribe regulations to provide for consideration of in-kind contributions by non-Federal Government participants in a project conducted under the program for the purpose of calculating the share of the project costs that has been or is being undertaken by such participants. In such regulations, the Secretary may authorize a participant that is a small business concern to use funds received under the Small Business Innovation Research Program or the Small Business Technology Transfer Program to help pay the costs of project activities. Any such funds so used may be considered in calculating the amount of the financial commitment undertaken by the non-Federal Government participants unless the Secretary determines that the small business concern has not made a significant equity percentage contribution in the project from non-Federal sources.
(3) The Secretary shall consider a project proposal submitted by a small business concern without regard to the ability of the small business concern to immediately meet its share of the anticipated project costs. Upon the selection of a project proposal submitted by a small business concern, the small business concern shall have a period of not less than 120 days in which to arrange to meet its financial commitment requirements under the project from sources other than a person of a foreign country. If the Secretary determines upon the expiration of that period that the small business concern will be unable to meet its share of the anticipated project costs, the Secretary shall revoke the selection of the project proposal submitted by the small business concern.
(d)
(e)
(1) The extent to which the proposed project advances and enhances the national security objectives set forth in section 2501(a) of this title.
(2) The technical excellence of the proposed project.
(3) The qualifications of the personnel proposed to participate in the research activities of the proposed project.
(4) An assessment of timely private sector investment in activities to achieve the goals and objectives of the proposed project other than through the project.
(5) The potential effectiveness of the project in the further development and application of each technology proposed to be developed by the project for the national technology and industrial base.
(6) The extent of the financial commitment of eligible firms to the proposed project.
(7) The extent to which the project does not unnecessarily duplicate projects undertaken by other agencies.
(f)
(Added Pub. L. 102–484, div. D, title XLII, §4221(a), Oct. 23, 1992, 106 Stat. 2677; amended Pub. L. 103–160, div. A, title XIII, §§1315(a), 1317(c), Nov. 30, 1993, 107 Stat. 1787, 1789; Pub. L. 103–337, div. A, title XI, §1115(a), Oct. 5, 1994, 108 Stat. 2868; Pub. L. 104–106, div. A, title X, §1081(c), Feb. 10, 1996, 110 Stat. 452.)
A prior section 2511, added Pub. L. 101–510, div. A, title VIII, §823(a)(3), Nov. 5, 1990, 104 Stat. 1600; amended Pub. L. 102–190, div. A, title VIII, §824(b), Dec. 5, 1991, 105 Stat. 1438, defined “manufacturing technology”, “manufacturing extension program”, and “United States-based small manufacturing firm” for purposes of former chapter 149 of this title, prior to repeal and restatement in section 2491 of this title by Pub. L. 102–484, §§4202(a), 4203(a).
Another prior section 2511 was renumbered section 2540 of this title and subsequently repealed.
Provisions similar to those in this section were contained in section 2523 of this title, prior to repeal by Pub. L. 102–484, §4202(a).
1996—Pub. L. 104–106 substituted “program” for “partnerships” in section catchline and amended text generally. Prior to amendment, text related to program for establishment of cooperative arrangements between Department of Defense and eligible entities.
1994—Subsec. (c)(3). Pub. L. 103–337 added par. (3).
1993—Subsec. (c). Pub. L. 103–160, §1315(a), amended subsec. (c) generally. Prior to amendment, subsec. (c) read as follows: “The Secretary of Defense shall ensure that, to the maximum extent he determines to be practicable, the amount of the funds provided by the Federal Government under a partnership does not exceed the total amount provided by non-Federal Government participants in that partnership.”
Subsec. (e). Pub. L. 103–160, §1317(c), struck out “, except that procedures other than competitive procedures may be used in any case in which an exception set out in section 2304(c) of this title applies” after “partnerships”.
Pub. L. 105–85, div. A, title II, §203, Nov. 18, 1997, 111 Stat. 1655, as amended by Pub. L. 106–65, div. A, title IX, §911(a)(1), Oct. 5, 1999, 113 Stat. 717, provided that:
“(a)
“(b)
“(2) The objectives for fiscal years under paragraph (1) are as follows:
“(A) For fiscal year 1998, 5 percent.
“(B) For fiscal year 1999, 7 percent.
“(C) For fiscal year 2000, 10 percent.
“(D) For fiscal year 2001, 15 percent.
“(3) The Secretary of Defense may establish for a military department for a fiscal year an objective different from the objective set forth in paragraph (2) if the Secretary—
“(A) determines that compelling national security considerations require the establishment of the different objective; and
“(B) notifies Congress of the determination and the reasons for the determination.
“(c)
“(2) The primary responsibilities of the designated official shall include developing policy and overseeing the establishment of, and adherence to, procedures for ensuring that dual-use projects are initiated and administered effectively and that applicable commercial technologies are integrated into current and future military systems.
“(3) In carrying out the responsibilities, the designated official shall ensure that—
“(A) dual-use projects are consistent with the joint warfighting science and technology plan referred to in section 270 of the National Defense Authorization Act for Fiscal Year 1997 (Public Law 104–201; 10 U.S.C. 2501 note); and
“(B) the dual-use projects of the military departments and defense agencies of the Department of Defense are coordinated and avoid unnecessary duplication.
“(d)
“(e)
“(f)
“(2) The report for a fiscal year shall contain, at a minimum, the following:
“(A) The aggregate value of all contracts, grants, cooperative agreements, or other transactions entered into during the fiscal year for which funding is counted toward meeting an objective under this section, expressed in relationship to the total amount appropriated for the applied research programs in the Department of Defense for that fiscal year.
“(B) For each military department, the value of all contracts, grants, cooperative agreements, or other transactions entered into during the fiscal year for which funding is counted toward meeting an objective under this section, expressed in relationship to the total amount appropriated for the applied research program of the military department for that fiscal year.
“(C) A summary of the cost-sharing arrangements in dual-use projects that were initiated during the fiscal year and are counted toward reaching an objective under this section.
“(D) A description of the regulations, directives, or other procedures that have been issued by the Secretary of Defense or the Secretary of a military department to increase the percentage of the total value of the dual-use projects undertaken to meet or exceed an objective under this section.
“(E) Any recommended legislation to facilitate achievement of objectives under this section.
“(g)
“(2) Of the amounts authorized to be appropriated by section 201, $50,000,000 is authorized for the Initiative.
“(3) Projects and participants in the Initiative shall be selected through the use of competitive procedures.
“(4) The budget submitted to Congress by the President for fiscal year 1999 and each fiscal year thereafter pursuant to section 1105(a) of title 31, United States Code, shall set forth separately the funding request for the Initiative.
“(h)
“(i)
“(1) The term ‘applied research program’ means a program of a military department which is funded under the 6.2 Research, Development, Test and Evaluation account of that department.
“(2) The term ‘dual-use project’ means a project under a program of a military department or a defense agency under which research or development of a dual-use technology is carried out and the costs of which are shared by the Department of Defense and non-Government entities.”
Section 1315(g) of Pub. L. 103–160 provided that in the case of projects funded under section 2511, 2512, 2513, 2523, or 2524 of this title with funds appropriated for a fiscal year beginning before Oct. 1, 1993, the amendments made by section 1315 of Pub. L. 103–160 would not alter the financial commitment requirements in effect on Nov. 30, 1993, for the non-Federal Government participants in the project.
§2512
Section 2512, added Pub. L. 102–484, div. D, title XLII, §4222(a), Oct. 23, 1992, 106 Stat. 2679; amended Pub. L. 103–160, div. A, title XIII, §1315(b), Nov. 30, 1993, 107 Stat. 1787; Pub. L. 103–337, div. A, title XI, §1115(b), Oct. 5, 1994, 108 Stat. 2868, related to commercial-military integration partnerships.
A prior section 2512, added Pub. L. 101–510, div. A, title VIII, §823(a)(3), Nov. 5, 1990, 104 Stat. 1600, related to responsibility of Secretary of Defense to provide management and planning, prior to repeal by Pub. L. 102–484, §4202(a).
Section 2513, added Pub. L. 102–190, div. A, title VIII, §821(a), Dec. 5, 1991, 105 Stat. 1428, §2524; renumbered §2513 and amended Pub. L. 102–484, div. D, title XLII, §4223(a)–(f), Oct. 23, 1992, 106 Stat. 2681; Pub. L. 103–35, title II, §201(d)(3), (e)(1), May 31, 1993, 107 Stat. 99; Pub. L. 103–160, div. A, title XI, §1182(g)(2), title XIII, §§1315(c), 1316, Nov. 30, 1993, 107 Stat. 1774, 1787, 1789; Pub. L. 103–337, div. A, title XI, §1115(c), Oct. 5, 1994, 108 Stat. 2868, related to regional technology alliances assistance program.
A prior section 2513, added Pub. L. 101–510, div. A, title VIII, §823(a)(3), Nov. 5, 1990, 104 Stat. 1601; amended Pub. L. 102–190, div. A, title II, §203(c), Dec. 5, 1991, 105 Stat. 1314, required annual National Defense Manufacturing Technology Plan, prior to repeal by Pub. L. 102–484, §4202(a).
(a)
(b)
(c)
(2) Under the Program, the defense laboratories, in coordination with the Office of Technology Transfer in the Office of the Secretary of Defense, shall carry out cooperative activities with private industry in order to promote (by the use or exchange of patents, licenses, cooperative research and development agreements and other cooperative agreements, and the use of symposia, meetings, and other similar mechanisms) the transfer of defense or dual-use technologies from the defense laboratories to private industry, and the development and application of such technologies by the defense laboratories and private industry, for the purpose of the commercial utilization of such technologies by private industry.
(3) The Secretary of Defense shall develop and annually update a plan for each defense laboratory that participates in the Program under which plan the laboratory shall carry out cooperative activities with private industry to promote the transfers described in subsection (b).
(4) In this subsection, the term “defense laboratory” means any laboratory owned or operated by the Department of Defense that carries out research in fiscal year 1993 in an amount in excess of $50,000,000.
(Added Pub. L. 102–484, div. D, title XLII, §4224(a), Oct. 23, 1992, 106 Stat. 2682; amended Pub. L. 104–201, div. A, title VIII, §829(f), Sept. 23, 1996, 110 Stat. 2614.)
A prior section 2514, added Pub. L. 101–510, div. A, title VIII, §823(a)(3), Nov. 5, 1990, 104 Stat. 1601, directed Secretary of Defense to enhance research relating to manufacturing technology, prior to repeal by Pub. L. 102–484, §4202(a).
Provisions similar to those in subsecs. (a) and (b) of this section were contained in section 2363 of this title prior to repeal by Pub. L. 102–484, §§4224(c), 4271(a)(2).
1996—Subsec. (c)(5). Pub. L. 104–201 struck out par. (5) which read as follows: “The Secretary shall coordinate the Program with the National Defense Technology and Industrial Base Council.”
Superconductivity research and development activities by Secretary of Defense and by Defense Advanced Research Projects Agency, see section 5207 of Title 15, Commerce and Trade.
Pub. L. 100–180, div. A, title II, §218(c), Dec. 4, 1987, 101 Stat. 1053, as amended by Pub. L. 103–160, div. A, title IX, §904(f), Nov. 30, 1993, 107 Stat. 1729; Pub. L. 106–65, div. A, title IX, §911(a)(1), Oct. 5, 1999, 113 Stat. 717, provided that:
“(1) The Secretary of Defense, acting through the Under Secretary of Defense for Acquisition, Technology, and Logistics, shall take appropriate action to ensure that high-temperature superconductivity technology resulting from the research activities of the Department of Defense is transferred to the private sector. Such transfer shall be made in accordance with section 10(e) of the Stevenson-Wydler Technology Innovation Act of 1980 (15 U.S.C. 3710(e)), other applicable provisions of law, and Executive Order Number 12591, dated April 10, 1987 [set out as a note under 15 U.S.C. 3710].
“(2) The Secretary of Energy, in consultation with the Under Secretary of Defense for Acquisition, Technology, and Logistics, shall ensure that the national laboratories of the Department of Energy participate, to the maximum appropriate extent, in the transfer to the private sector of technology developed under the Department of Defense superconductivity program in the national laboratories.”
(a)
(b)
(c)
(1) monitors all research and development activities that are carried out by or for the military departments and Defense Agencies;
(2) identifies all such research and development activities that use technologies, or result in technological advancements, having potential nondefense commercial applications;
(3) serves as a clearinghouse for, coordinates, and otherwise actively facilitates the transition of such technologies and technological advancements from the Department of Defense to the private sector;
(4) conducts its activities in consultation and coordination with the Department of Energy and the Department of Commerce; and
(5) provides private firms with assistance to resolve problems associated with security clearances, proprietary rights, and other legal considerations involved in such a transition of technology.
(d)
(Added Pub. L. 102–484, div. D, title XLII, §4225(a), Oct. 23, 1992, 106 Stat. 2683; amended Pub. L. 104–106, div. A, title XV, §1502(a)(22), Feb. 10, 1996, 110 Stat. 505; Pub. L. 106–65, div. A, title X, §1067(1), Oct. 5, 1999, 113 Stat. 774; Pub. L. 108–136, div. A, title X, §1031(a)(23), Nov. 24, 2003, 117 Stat. 1598; Pub. L. 108–375, div. A, title X, §1084(b)(3), Oct. 28, 2004, 118 Stat. 2060.)
A prior section 2515, added Pub. L. 101–510, div. A, title VIII, §823(a)(3), Nov. 5, 1990, 104 Stat. 1602, related to computer-integrated manufacturing technology, prior to repeal by Pub. L. 102–484, §4202(a).
2004—Subsec. (d). Pub. L. 108–375 struck out par. (1) designation before “The Secretary”, substituted “congressional defense committees” for “congressional committees specified in paragraph (2)”, and struck out par. (2) which read as follows: “The committees referred to in paragraph (1) are—
“(A) the Committee on Armed Services and the Committee on Appropriations of the Senate; and
“(B) the Committee on Armed Services and the Committee on Appropriations of the House of Representatives.”
2003—Subsec. (d). Pub. L. 108–136, §1031(a)(23)(A), substituted “Biennial” for “Annual” in heading.
Subsec. (d)(1). Pub. L. 108–136, §1031(a)(23)(B), substituted “a biennial report” for “an annual report” in first sentence, “each even-numbered year” for “each year” in second sentence, and “during the two fiscal years” for “during the fiscal year” in third sentence.
1999—Subsec. (d)(2)(B). Pub. L. 106–65 substituted “Committee on Armed Services” for “Committee on National Security”.
1996—Subsec. (d). Pub. L. 104–106 substituted “Annual Report” for “Reporting Requirement” in heading, designated existing provisions as par. (1), substituted “The Secretary of Defense shall submit to the congressional committees specified in paragraph (2) an annual report on the activities of the Office. The report shall be submitted each year at the same time” for “The Secretary of Defense shall submit to the Committees on Armed Services and on Appropriations of the Senate and the House of Representatives an annual report on the activities of the Office at the same time”, and added par. (2).
Section 4225(b) of Pub. L. 102–484 provided that: “The Office of Technology Transition shall commence operations within 120 days after the date of the enactment of this Act [Oct. 23, 1992].”
Section 4225(c)(2) of Pub. L. 102–484 provided that: “Notwithstanding section 2515(d) of title 10, United States Code (as added by subsection (a))—
“(A) the first report under that section shall be submitted not later than one year after the date of the enactment of this Act [Oct. 23, 1992]; and
“(B) no additional report is necessary under that section in the fiscal year in which such first report is submitted.”
§2516
Section, added Pub. L. 102–484, div. D, title XLII, §4226(a), Oct. 23, 1992, 106 Stat. 2684; amended Pub. L. 103–35, title II, §201(g)(8), May 31, 1993, 107 Stat. 100, related to Military-Civilian Integration and Technology Transfer Advisory Board.
A prior section 2516, added Pub. L. 101–510, div. A, title VIII, §823(a)(3), Nov. 5, 1990, 104 Stat. 1602, related to enhancement of concurrent engineering practices in design and development of weapon systems, prior to repeal by Pub. L. 102–484, §4202(a).
(a)
(b)
(1) to minimize the duplication of any effort of the Department of Commerce by the Department of Defense regarding the monitoring of foreign activities related to defense critical technologies that have potential commercial uses; and
(2) to ensure that the Office is effectively utilized to disseminate information to users of such information within the Federal Government.
(c)
(1) To maintain within the Department of Defense a central library for the compilation and appropriate dissemination of unclassified and classified information and assessments regarding significant foreign activities in research, development, and applications of defense critical technologies.
(2) To establish and maintain—
(A) a widely accessible unclassified data base of information and assessments regarding foreign science and technology activities that involve defense critical technologies, including, especially, activities in Europe and in Pacific Rim countries; and
(B) a classified data base of information and assessments regarding such activities.
(3) To perform liaison activities among the military departments, Defense Agencies, and other appropriate elements of the Department of Defense, with appropriate agencies and offices of the Department of Commerce and the Department of State, and with other departments and agencies of the Federal Government in order to ensure that significant activities in research, development, and applications of defense critical technologies are identified, monitored, and assessed by an appropriate department or agency of the Federal Government.
(4) To ensure the maximum practicable public availability of information and assessments contained in the unclassified data bases established pursuant to paragraph (2)—
(A) by limiting, to the maximum practicable extent, restrictive classification of such information and assessments; and
(B) by disseminating to the National Technical Information Service of the Department of Commerce information and assessments regarding defense critical technologies having potential commercial uses.
(5) To disseminate through the National Technical Information Service of the Department of Commerce unclassified information and assessments regarding defense critical technologies having potential commercial uses so that such information and assessments may be further disseminated within the Federal Government and to the private sector.
(Added Pub. L. 102–190, div. A, title VIII, §821(a), Dec. 5, 1991, 105 Stat. 1430, §2525; renumbered §2517 and amended Pub. L. 102–484, div. D, title XLII, §4227, Oct. 23, 1992, 106 Stat. 2685.)
A prior section 2517 was renumbered section 2523 of this title and subsequently repealed.
1992—Pub. L. 102–484 renumbered section 2525 of this title as this section and inserted “Critical” after “Foreign Defense” in subsec. (a).
(a)
(b)
(Added Pub. L. 102–190, div. A, title VIII, §821(a), Dec. 5, 1991, 105 Stat. 1431, §2526; renumbered §2518, Pub. L. 102–484, div. D, title XLII, §4228, Oct. 23, 1992, 106 Stat. 2685.)
A prior section 2518 was renumbered section 2522 of this title and subsequently repealed.
1992—Pub. L. 102–484 renumbered section 2526 of this title as this section.
(a)
(b)
(2) For purposes of this section, a federally funded research and development center shall be considered a Department of Defense laboratory if the center is sponsored by the Department of Defense.
(c)
(2) Subject to subsection (d), the Secretary may provide a partnership with technical and other assistance in order to facilitate the achievement of the purpose of this section.
(d)
(2) The regulations prescribed pursuant to section 2511(c)(2) of this title shall apply to in-kind contributions made by non-Federal Government participants in a partnership.
(e)
(f)
(g)
(Added Pub. L. 103–337, div. A, title XI, §1113(a), Oct. 5, 1994, 108 Stat. 2864; amended Pub. L. 104–106, div. A, title X, §1081(d), Feb. 10, 1996, 110 Stat. 454.)
1996—Subsec. (b). Pub. L. 104–106, §1081(d)(1), struck out “referred to in section 2511(b) of this title” after “corporations”.
Subsec. (f). Pub. L. 104–106, §1081(d)(2), substituted “section 2511(e)” for “section 2511(f)”.
§2520
Section, added Pub. L. 103–337, div. A, title XI, §1113(b), Oct. 5, 1994, 108 Stat. 2865, related to Navy Reinvestment Program.
2000—Pub. L. 106–398, §1 [[div. A], title III, §344(c)(2)], Oct. 30, 2000, 114 Stat. 1654, 1654A–71, redesignated item 2525 as 2521 and added item 2522.
1998—Pub. L. 105–261, div. A, title X, §1069(a)(5), Oct. 17, 1998, 112 Stat. 2136, struck out “AND DUAL-USE ASSISTANCE EXTENSION PROGRAMS” after “TECHNOLOGY” in subchapter heading.
1996—Pub. L. 104–106, div. A, title II, §276(b), title X, §1081(i)(3), Feb. 10, 1996, 110 Stat. 242, 455, struck out items 2521 “National Defense Manufacturing Technology Program”, 2522 “Defense Advanced Manufacturing Technology Partnerships”, 2523 “Manufacturing extension programs”, and 2524 “Defense dual-use assistance extension program” and substituted “Manufacturing Technology Program” for “Manufacturing Science and Technology Program” in item 2525.
1994—Pub. L. 103–337, div. A, title II, §256(a)(2), Oct. 5, 1994, 108 Stat. 2704, substituted “Manufacturing Science and” for “Industrial Preparedness Manufacturing” in item 2525.
1993—Pub. L. 103–160, div. A, title VIII, §801(a)(2), Nov. 30, 1993, 107 Stat. 1701, added item 2525.
(a)
(b)
(1) to provide centralized guidance and direction (including goals, milestones, and priorities) to the military departments and the Defense Agencies on all matters relating to manufacturing technology;
(2) to direct the development and implementation of Department of Defense plans, programs, projects, activities, and policies that promote the development and application of advanced technologies to manufacturing processes, tools, and equipment;
(3) to improve the manufacturing quality, productivity, technology, and practices of businesses and workers providing goods and services to the Department of Defense;
(4) to focus Department of Defense support for the development and application of advanced manufacturing technologies and processes for use to meet manufacturing requirements that are essential to the national defense, as well as for repair and remanufacturing in support of the operations of systems commands, depots, air logistics centers, and shipyards;
(5) to disseminate information concerning improved manufacturing improvement concepts, including information on such matters as best manufacturing practices, product data exchange specifications, computer-aided acquisition and logistics support, and rapid acquisition of manufactured parts;
(6) to sustain and enhance the skills and capabilities of the manufacturing work force;
(7) to promote high-performance work systems (with development and dissemination of production technologies that build upon the skills and capabilities of the work force), high levels of worker education and training; and
(8) to ensure appropriate coordination between the manufacturing technology programs and industrial preparedness programs of the Department of Defense and similar programs undertaken by other departments and agencies of the Federal Government or by the private sector.
(c)
(2) In the establishment and review of requirements for an advanced manufacturing technology or process, the Secretary shall ensure the participation of those prospective technology users that are expected to be the users of that technology or process.
(3) The Secretary shall ensure that each project under the program for the development of an advanced manufacturing technology or process includes an implementation plan for the transition of that technology or process to the prospective technology users that will be the users of that technology or process.
(4) In the periodic review of a project under the program, the Secretary shall ensure participation by those prospective technology users that are the expected users for the technology or process being developed under the project.
(5) In order to promote increased dissemination and use of manufacturing technology throughout the national defense technology and industrial base, the Secretary shall seek, to the maximum extent practicable, the participation of manufacturers of manufacturing equipment in the projects under the program.
(6) In this subsection, the term “prospective technology users” means the following officials and elements of the Department of Defense:
(A) Program and project managers for defense weapon systems.
(B) Systems commands.
(C) Depots.
(D) Air logistics centers.
(E) Shipyards.
(d)
(2) Under the competitive procedures used, the factors to be considered in the evaluation of each proposed grant, contract, cooperative agreement, or other transaction for a project under the program shall include the extent to which that proposed transaction provides for the proposed recipient to share in the cost of the project. For a project for which the Government receives an offer from only one offeror, the contracting officer shall negotiate the ratio of contract recipient cost to Government cost that represents the best value to the Government.
(Added Pub. L. 103–160, div. A, title VIII, §801(a)(1), Nov. 30, 1993, 107 Stat. 1700, §2525; amended Pub. L. 103–337, div. A, title II, §256(a)(1), Oct. 5, 1994, 108 Stat. 2704; Pub. L. 104–106, div. A, title II, §276(a), title X, §1081(e), title XV, §1503(a)(28), Feb. 10, 1996, 110 Stat. 241, 454, 512; Pub. L. 105–85, div. A, title II, §211(a), (b), Nov. 18, 1997, 111 Stat. 1657; Pub. L. 105–261, div. A, title II, §213, Oct. 17, 1998, 112 Stat. 1947; Pub. L. 106–65, div. A, title II, §216, Oct. 5, 1999, 113 Stat. 543; renumbered §2521, Pub. L. 106–398, §1 [[div. A], title III, §344(c)(1)(A)], Oct. 30, 2000, 114 Stat. 1654, 1654A–71; Pub. L. 107–107, div. A, title X, §1048(b)(2), Dec. 28, 2001, 115 Stat. 1225; Pub. L. 107–314, div. A, title II, §213, Dec. 2, 2002, 116 Stat. 2481; Pub. L. 108–136, div. A, title X, §1031(a)(24), Nov. 24, 2003, 117 Stat. 1598.)
A prior section 2521, added Pub. L. 102–484, div. D, title XLII, §4231(a), Oct. 23, 1992, 106 Stat. 2686, related to National Defense Manufacturing Technology Program, prior to repeal by Pub. L. 104–106, div. A, title X, §1081(f), Feb. 10, 1996, 110 Stat. 454.
Another prior section 2521, added Pub. L. 102–190, div. A, title VIII, §821(a), Dec. 5, 1991, 105 Stat. 1426, defined terms for purposes of former chapter 150 of this title, prior to repeal and restatement in section 2491 [now 2500] of this title by Pub. L. 102–484, §§4202(a), 4203(a).
Another prior section 2521 was renumbered section 2540 of this title and subsequently repealed.
2003—Subsec. (e). Pub. L. 108–136 struck out heading and text of subsec. (e) which related to preparation and maintenance of a five-year plan for the Manufacturing Technology Program by the Secretary of Defense.
2002—Subsec. (e)(1). Pub. L. 107–314, §213(a), substituted “prepare and maintain a five-year plan for the program.” for “prepare a five-year plan for the program which establishes—
“(A) the overall manufacturing technology goals, milestones, priorities, and investment strategy for the program; and
“(B) for each of the five fiscal years covered by the plan, the objectives of, and funding for the program by, each military department and each Defense Agency participating in the program.”
Subsec. (e)(2). Pub. L. 107–314, §213(a), substituted “establish” for “include” in introductory provisions and amended subpars. (A) and (B) generally. Prior to amendment, text read as follows:
“(A) An assessment of the effectiveness of the program, including a description of all completed projects and status of implementation.
“(B) An assessment of the extent to which the costs of projects are being shared by the following:
“(i) Commercial enterprises in the private sector.
“(ii) Department of Defense program offices, including weapon system program offices.
“(iii) Departments and agencies of the Federal Government outside the Department of Defense.
“(iv) Institutions of higher education.
“(v) Other institutions not operated for profit.
“(vi) Other sources.”
Subsec. (e)(3). Pub. L. 107–314, §213(b), substituted “biennially” for “annually” and “for each even-numbered fiscal year” for “for a fiscal year”.
2001—Subsec. (a). Pub. L. 107–107 substituted “Under Secretary of Defense for Acquisition, Technology, and Logistics” for “Under Secretary of Defense for Acquisition and Technology”.
2000—Pub. L. 106–398 renumbered section 2525 of this title as this section.
1999—Subsec. (a). Pub. L. 106–65, §216(a), in first sentence, inserted “through the development and application of advanced manufacturing technologies and processes that will reduce the acquisition and supportability costs of defense weapon systems and reduce manufacturing and repair cycle times across the life cycles of such systems” after “title”.
Subsec. (b)(4). Pub. L. 106–65, §216(b), amended par. (4) generally. Prior to amendment, par. (4) read as follows: “to promote dual-use manufacturing processes;”.
Subsec. (c)(2) to (6). Pub. L. 106–65, §216(c), added pars. (2) to (4), redesignated former par. (2) as (5), and added par. (6).
Subsec. (d). Pub. L. 106–65, §216(d), struck out “(A)” before “In accordance with” in par. (1), redesignated par. (1)(B) as par. (2), substituted “Under the competitive procedures used, the factors to be considered in the evaluation of each proposed grant, contract, cooperative agreement, or other transaction for a project under the program shall include the extent to which that proposed transaction provides for the proposed recipient to share in the cost of the project.” for “For each grant awarded and each contract, cooperative agreement, or other transaction entered into on a cost-share basis under the program, the ratio of contract recipient cost to Government cost shall be determined by competitive procedures.”, and struck out former pars. (2) and (3) which required grants, contracts, cooperative agreements, and other transactions to be awarded or entered into on a cost-sharing basis unless the Secretary of Defense made certain determinations and specified as a goal that at least 25 percent of the funds available for the program for each fiscal year be used for grants, contracts, cooperative agreements, and other transactions on a cost-share basis under which the ratio of recipient cost to Government cost was two to one.
Subsec. (e)(2)(A). Pub. L. 106–65, §216(e)(1), inserted “, including a description of all completed projects and status of implementation” before period at end.
Subsec. (e)(2)(C). Pub. L. 106–65, §216(e)(2), added subpar. (C).
1998—Subsec. (d)(1). Pub. L. 105–261, §213(a), designated existing provisions as subpar. (A), substituted “In accordance with the policy stated in section 2374 of this title, competitive” for “Competitive”, and added subpar. (B).
Subsec. (d)(2). Pub. L. 105–261, §213(b), designated existing provisions as subpar. (A), redesignated former subpars. (A) to (C) as cls. (i) to (iii), respectively, and added subpars. (B) and (C).
Subsec. (d)(3). Pub. L. 105–261, §213(c)(2), substituted “As a goal, at least” for “At least” and “should” for “shall” and inserted at end “The Secretary of Defense, in coordination with the Secretaries of the military departments and upon recommendation of the Under Secretary of Defense for Acquisition and Technology, shall establish annual objectives to meet such goal.”
Subsec. (d)(4). Pub. L. 105–261, §213(c)(1), struck out par. (4) which read as follows: “If the requirement of paragraph (3) cannot be met by July 15 of a fiscal year, the Under Secretary of Defense for Acquisition and Technology may waive the requirement and obligate the balance of the funds available for the program for that fiscal year on a cost-share basis under which the ratio of recipient cost to Government cost is less than two to one. Before implementing any such waiver, the Under Secretary shall submit to the Committee on Armed Services of the Senate and the Committee on National Security of the House of Representatives the reasons for the waiver.”
Subsec. (e)(2). Pub. L. 105–261, §213(d), amended par. (2) generally. Prior to amendment, par. (2) read as follows: “The plan shall include an assessment of the effectiveness of the program.”
1997—Subsec. (c)(2). Pub. L. 105–85, §211(a), amended par. (2) generally. Prior to amendment, par. (2) read as follows: “The Secretary shall seek, to the extent practicable, the participation of manufacturers of manufacturing equipment in the projects under the program.”
Subsec. (e). Pub. L. 105–85, §211(b), added subsec. (e).
1996—Pub. L. 104–106, §276(a)(1), amended section catchline, as amended by Pub. L. 104–106, §§1503(a)(28), 1506, by striking out “Science and” after “Manufacturing”.
Pub. L. 104–106, §1503(a)(28), substituted “Science and Technology Program” for “science and technology program” in section catchline.
Subsec. (a). Pub. L. 104–106, §276(a)(2), struck out “Science and” after “Manufacturing” and inserted after first sentence “The Secretary shall use the joint planning process of the directors of the Department of Defense laboratories in establishing the program.”
Subsec. (b). Pub. L. 104–106, §1081(e), amended subsec. (b) generally. Prior to amendment, subsec. (b) read as follows: “
Subsec. (c). Pub. L. 104–106, §276(a)(3), designated existing provisions as par. (1) and added par. (2).
Subsec. (d)(2)(C). Pub. L. 104–106, §276(a)(4)(A), added subpar. (C).
Subsec. (d)(3), (4). Pub. L. 104–106, §276(a)(4)(B), added pars. (3) and (4).
1994—Pub. L. 103–337 substituted “Manufacturing science and technology program” for “Industrial Preparedness Manufacturing Technology Program” as section catchline and amended text generally. Prior to amendment, text read as follows: “The Secretary of Defense shall establish an Industrial Preparedness Manufacturing Technology program to enhance the capability of industry to meet the manufacturing needs of the Department of Defense.”
Pub. L. 109–163, div. A, title II, subtitle D, Jan. 6, 2006, 119 Stat. 3175, provided that:
“(a)
“(b)
“(c)
“(a)
“(b)
“(1) The Manufacturing Extension Partnership Program.
“(2) The identification of incentives for industry to incorporate and utilize such manufacturing processes and technologies.
“(a)
“(1) identify an area of technology where the development of an industry-prepared roadmap for new manufacturing and technology processes applicable to defense manufacturing requirements would be beneficial to the Department of Defense; and
“(2) establish a task force, and act in cooperation, with the private sector to map the strategy for the development of manufacturing processes and technologies needed to support technology development in the area identified under paragraph (1).
“(b)
“(a)
“(b)
“(1) a comprehensive description of the actions undertaken under this subtitle during fiscal year 2006;
“(2) an assessment of effectiveness of such actions in enhancing research and development on manufacturing technologies and processes, and the implementation of such within the defense manufacturing base; and
“(3) such recommendations as the Under Secretary considers appropriate for additional actions to be undertaken in order to increase the effectiveness of the actions undertaken under this subtitle in enhancing manufacturing activities within the defense manufacturing base.
“In this subtitle:
“(1)
“(2)
“(3)
Pub. L. 108–136, div. A, title VIII, §823, Nov. 24, 2003, 117 Stat. 1547, provided that:
“(a)
“(1) An identification of resources with respect to Government contracting regulations, including compliance procedures and information on the availability of counseling.
“(2) An identification of resources for locating opportunities for contracting with the Department of Defense, including information about defense contracts that are expected to be carried out that may require the use of machine tools.
“(b)
Pub. L. 108–87, title VIII, §8062, Sept. 30, 2003, 117 Stat. 1086, provided that: “Notwithstanding any other provision of law, the Naval shipyards of the United States shall be eligible to participate in any manufacturing extension program financed by funds appropriated in this or any other Act or hereafter in any other Act.”
Similar provisions were contained in the following prior appropriation acts:
Pub. L. 107–248, title VIII, §8063, Oct. 23, 2002, 116 Stat. 1550.
Pub. L. 107–117, div. A, title VIII, §8068, Jan. 10, 2002, 115 Stat. 2262.
Pub. L. 106–259, title VIII, §8067, Aug. 9, 2000, 114 Stat. 689.
Pub. L. 106–79, title VIII, §8070, Oct. 25, 1999, 113 Stat. 1245.
Pub. L. 105–262, title VIII, §8070, Oct. 17, 1998, 112 Stat. 2312.
Pub. L. 105–56, title VIII, §8076, Oct. 8, 1997, 111 Stat. 1236.
Pub. L. 104–208, div. A, title I, §101(b) [title VIII, §8085], Sept. 30, 1996, 110 Stat. 3009–71, 3009–105.
Pub. L. 104–61, title VIII, §8064, Dec. 1, 1995, 109 Stat. 664.
Pub. L. 103–335, title VIII, §8071, Sept. 30, 1994, 108 Stat. 2635.
Pub. L. 103–139, title VIII, §8083A, Nov. 11, 1993, 107 Stat. 1459.
Pub. L. 102–396, title IX, §9112, Oct. 6, 1992, 106 Stat. 1929.
The Secretary of the Army is authorized by chapter 434 of this title to carry out programs for the support of armaments retooling and manufacturing in the national defense industrial and technology base.
(Added Pub. L. 106–398, §1 [[div. A], title III, §344(c)(1)(B)], Oct. 30, 2000, 114 Stat. 1654, 1654A–71.)
A prior section 2522, added Pub. L. 102–190, div. A, title VIII, §823(a)(1), Dec. 5, 1991, 105 Stat. 1435, §2518; renumbered §2522 and amended Pub. L. 102–484, div. D, title XLII, §4232(a), (b), Oct. 23, 1992, 106 Stat. 2687, related to defense advanced manufacturing technology partnerships, prior to repeal by Pub. L. 104–106, div. A, title X, §1081(f), Feb. 10, 1996, 110 Stat. 454.
Another prior section 2522, added Pub. L. 101–189, div. A, title VIII, §841(b)(1), Nov. 29, 1989, 103 Stat. 1512, §2508; amended Pub. L. 101–510, div. A, title VIII, §821(a), Nov. 5, 1990, 104 Stat. 1597; Pub. L. 102–25, title VII, §701(g)(3), Apr. 6, 1991, 105 Stat. 115; renumbered §2522, Pub. L. 102–190, div. A, title VIII, §821(b)(1), Dec. 5, 1991, 105 Stat. 1431, required an annual defense critical technologies plan, prior to repeal by Pub. L. 102–484, §4202(a).
Section 2523, added Pub. L. 101–510, div. A, title VIII, §823(a)(3), Nov. 5, 1990, 104 Stat. 1602, §2517; amended Pub. L. 102–190, div. A, title VIII, §824(a), Dec. 5, 1991, 105 Stat. 1436; renumbered §2523 and amended Pub. L. 102–484, div. D, title XLII, §4233(a), (b), Oct. 23, 1992, 106 Stat. 2687; Pub. L. 103–160, div. A, title IX, §904(d)(1), title XI, §1182(b)(2), title XIII, §1315(d), Nov. 30, 1993, 107 Stat. 1728, 1772, 1787, related to manufacturing extension programs.
A prior section 2523, added Pub. L. 102–190, div. A, title VIII, §821(a), Dec. 5, 1991, 105 Stat. 1427, related to defense dual-use critical technology partnerships, prior to repeal and restatement in section 2511 of this title by Pub. L. 102–484, §§4202(a), 4221(a).
Section 2524, added Pub. L. 102–484, div. D, title XLII, §4234(a), Oct. 23, 1992, 106 Stat. 2687; amended Pub. L. 103–35, title II, §201(g)(9), May 31, 1993, 107 Stat. 100; Pub. L. 103–160, div. A, title XIII, §§1314, 1315(e), Nov. 30, 1993, 107 Stat. 1786, 1788; Pub. L. 103–337, div. A, title X, §1070(b)(10), title XI, §§1114(b), (c), 1115(d), Oct. 5, 1994, 108 Stat. 2857, 2867–2869; Pub. L. 104–106, div. A, title XV, §1503(a)(27), Feb. 10, 1996, 110 Stat. 512, related to defense dual-use assistance extension program.
A prior section 2524 was renumbered section 2513 of this title.
§2525
A prior section 2525 was renumbered section 2517 of this title.
A prior section 2526 was renumbered section 2518 of this title.
2006—Pub. L. 109–364, div. A, title VIII, §842(a)(2), Oct. 17, 2006, 120 Stat. 2337, which directed the amendment of the analysis for this subchapter by adding item 2533b at the end, was executed by inserting item 2533b after item 2533a.
2001—Pub. L. 107–107, div. A, title VIII, §832(a)(2), Dec. 28, 2001, 115 Stat. 1190, added item 2533a.
1994—Pub. L. 103–337, div. A, title VIII, §812(b)(2), title X, §1070(a)(13)(B), Oct. 5, 1994, 108 Stat. 2816, 2856, substituted “Determinations of public interest under the Buy American Act” for “Limitation on use of funds: procurement of goods which are other than American goods” in item 2533 and renumbered items 2540 and 2541 as 2539a and 2539b, respectively.
1993—Pub. L. 103–160, div. A, title VIII, §§828(c)(5), 842(c)(2), Nov. 30, 1993, 107 Stat. 1714, 1719, substituted “Award of certain contracts to entities controlled by a foreign government: prohibition” for “Prohibition on award of certain Department of Defense and Department of Energy contracts to companies owned by an entity controlled by a foreign government” in item 2536 and added items 2538 to 2541.
1992—Pub. L. 102–484, div. A, title VIII, §§836(a)(2), 838(b), Oct. 23, 1992, 106 Stat. 2463, 2466, added items 2536 and 2537.
(a)
(1) consider the effects of such existing or proposed memorandum of understanding or related agreement on the defense technology and industrial base of the United States; and
(2) regularly solicit and consider comments and recommendations from the Secretary of Commerce with respect to the commercial implications of such memorandum of understanding or related agreement and the potential effects of such memorandum of understanding or related agreement on the international competitive position of United States industry.
(b)
(c)
(Added Pub. L. 100–456, div. A, title VIII, §824, Sept. 29, 1988, 102 Stat. 2019, §2504; amended Pub. L. 101–189, div. A, title VIII, §815(a), Nov. 29, 1989, 103 Stat. 1500; Pub. L. 101–510, div. A, title XIV, §1453, Nov. 5, 1990, 104 Stat. 1694; renumbered §2531 and amended Pub. L. 102–484, div. D, title XLII, §§4202(a), 4271(c), Oct. 23, 1992, 106 Stat. 2659, 2696.)
1992—Pub. L. 102–484, §4202(a), renumbered section 2504 of this title as this section.
Subsec. (a)(1). Pub. L. 102–484, §4271(c), substituted “defense technology and industrial base” for “defense industrial base”.
1990—Subsec. (a). Pub. L. 101–510 inserted “or to the reciprocal procurement of defense items,” after “defense equipment,” in introductory provisions.
1989—Pub. L. 101–189 inserted “and related agreements” after “understanding” in section catchline and amended text generally. Prior to amendment, text read as follows: “In the negotiation and renegotiation of each memorandum of understanding between the Secretary of Defense, acting on behalf of the United States, and one or more foreign countries (or any instrumentality of a foreign country) relating to research, development, or production of defense equipment, the Secretary of Defense shall—
“(1) consider the effect of such proposed memorandum of understanding on the defense industrial base of the United States; and
“(2) regularly solicit and consider information or recommendations from the Secretary of Commerce with respect to the effect on the United States industrial base of such memorandum of understanding.”
Pub. L. 108–375, div. A, title VIII, §831, Oct. 28, 2004, 118 Stat. 2017, provided that:
“(a)
“(b)
“(1) develop a comprehensive defense acquisition trade policy that provides the necessary guidance and incentives for the elimination of any adverse effects of offset agreements in defense trade; and
“(2) review and make necessary modifications to existing acquisition policies and strategies, and review and seek to make necessary modifications to existing memoranda of understanding, cooperative project agreements, or related agreements with foreign defense trade partners, to reflect this goal.
“(c)
“(d)
“(1) The term ‘foreign defense trade partner’ means a foreign country with respect to which there is—
“(A) a memorandum of understanding or related agreement described in section 2531(a) of title 10, United States Code; or
“(B) a cooperative project agreement described in section 27 of the Arms Export Control Act (22 U.S.C. 2767).
“(2) The term ‘offset agreement’ has the meaning provided that term by section 36(e) of the Arms Export Control Act (22 U.S.C. 2776(e)).
“(3) The terms ‘defense article’ and ‘defense service’ have the meanings provided those terms by section 47(7) of the Arms Export Control Act (22 U.S.C. 2794(7)).”
(a)
(1) Transfer of technology in connection with offset arrangements.
(2) Application of offset arrangements, including cases in which United States funds are used to finance the purchase by a foreign government.
(3) Effects of offset arrangements on specific subsectors of the industrial base of the United States and for preventing or ameliorating any serious adverse effects on such subsectors.
(b)
(2) Paragraph (1) shall not apply in the case of a memorandum of understanding or agreement described in paragraph (1) if the Secretary of Defense, in consultation with the Secretary of Commerce and the Secretary of State, determines that a transfer of United States defense technology pursuant to such understanding or agreement will result in strengthening the national security of the United States and so certifies to Congress.
(3) If a United States firm is required under the terms of a memorandum of understanding, or other agreement entered into by the United States with a foreign country, to transfer defense technology to a foreign country, the United States firm may protest the determination to the Secretary of Defense on the grounds that the transfer of such technology would adversely affect the defense industrial base of the United States and would result in substantial financial loss to the protesting firm. The Secretary of Defense, in consultation with the Secretary of Commerce and the Secretary of State, shall make the final determination of the validity of the protesting firm's claim.
(c)
(d)
(1) The term “United States firm” means a business entity that performs substantially all of its manufacturing, production, and research and development activities in the United States.
(2) The term “foreign firm” means a business entity other than a United States firm.
(Added Pub. L. 100–456, div. A, title VIII, §825(b), Sept. 29, 1988, 102 Stat. 2020, §2505; renumbered §2532, Pub. L. 102–484, div. D, title XLII, §4202(a), Oct. 23, 1992, 106 Stat. 2659.)
1992—Pub. L. 102–484 renumbered section 2505 of this title as this section.
Pub. L. 108–87, title VIII, §8138, Sept. 30, 2003, 117 Stat. 1106, directed the Secretary of Defense to review contractual offset arrangements to which the policy established under this section applied, memoranda of understanding and related agreements to which the limitation in section 2531(c) of this title applied that had been entered into with a country with respect to which such contractual offset arrangements had been entered into, and waivers granted with respect to a foreign country under section 2534(d)(3) of this title; determine the effects of the use of such arrangements, memoranda of understanding, agreements, and waivers on the national technology and industrial base; and submit a report on the results of the review to Congress not later than Mar. 1, 2005.
Section 825(a) of Pub. L. 100–456 provided that: “Congress makes the following findings:
“(1) Many contracts entered into by United States firms for the supply of weapon systems or defense-related items to foreign countries and foreign firms are subject to contractual arrangements under which United States firms must agree—
“(A) to have a specified percentage of work under, or monetary amount of, the contract performed by one or more foreign firms;
“(B) to purchase a specified amount or quantity of unrelated goods or services from domestic sources of such foreign countries; or
“(C) to invest a specified amount in domestic businesses of such foreign countries.
Such contractual arrangements, known as ‘offsets’, are a component of international trade and could have an impact on United States defense industry opportunities in domestic and foreign markets.
“(2) Some United States contractors and subcontractors may be adversely affected by such contractual arrangements.
“(3) Many contracts which provide for or are subject to offset arrangements require, in connection with such arrangements, the transfer of United States technology to foreign firms.
“(4) The use of such transferred technology by foreign firms in conjunction with foreign trade practices permitted under the trade policies of the countries of such firms can give foreign firms a competitive advantage against United States firms in world markets for products using such technology.
“(5) A purchase of defense equipment pursuant to an offset arrangement may increase the cost of the defense equipment to the purchasing country and may reduce the amount of defense equipment that a country may purchase.
“(6) The exporting of defense equipment produced in the United States is important to maintain the defense industrial base of the United States, lower the unit cost of such equipment to the Department of Defense, and encourage the standardized utilization of United States equipment by the allies of the United States.”
Section 825(c) of Pub. L. 100–456, as amended by Pub. L. 101–189, div. A, title VIII, §816, Nov. 29, 1989, 103 Stat. 1501, provided that:
“(1) The President shall enter into negotiations with foreign countries that have a policy of requiring an offset arrangement in connection with the purchase of defense equipment or supplies from the United States. The negotiations should be conducted with a view to achieving an agreement with the countries concerned that would limit the adverse effects that such arrangements have on the defense industrial base of each such country. Every effort shall be made to achieve such agreements within two years after September 29, 1988.
“(2) In the negotiation or renegotiation of any memorandum of understanding between the United States and one or more foreign countries relating to the reciprocal procurement of defense equipment and supplies or research and development, the President shall make every effort to achieve an agreement with the country or countries concerned that would limit the adverse effects that offset arrangements have on the defense industrial base of the United States.”
[For delegation of functions of President under section 825(c) of Pub. L. 100–456 to Secretary of Defense and United States Trade Representative, see section 5–201 of Ex. Ord. No. 12661, 54 F.R. 779, set out as a note under section 2901 of Title 19, Customs Duties.]
Pub. L. 100–456, div. A, title VIII, §825(d), Sept. 29, 1988, 102 Stat. 2021, provided that, not later than Nov. 15, 1988, the President was to submit to Congress a comprehensive report on contractual offset arrangements required of United States firms for the supply of weapon systems or defense-related items to foreign countries or foreign firms, and, not later than Mar. 15, 1990, the President was to transmit to Congress a report containing a discussion of appropriate actions to be taken by the United States with respect to purchases from United States firms by a foreign country (or a firm of that country) when that country or firm required an offset arrangement in connection with the purchase of defense equipment or supplies in favor of such country.
(a) In determining under section 2 of the Buy American Act (41 U.S.C. 10a) whether application of such Act is inconsistent with the public interest, the Secretary of Defense shall consider the following:
(1) The bids or proposals of small business firms in the United States which have offered to furnish American goods.
(2) The bids or proposals of all other firms in the United States which have offered to furnish American goods.
(3) The United States balance of payments.
(4) The cost of shipping goods which are other than American goods.
(5) Any duty, tariff, or surcharge which may enter into the cost of using goods which are other than American goods.
(6) A need to ensure that the Department of Defense has access to advanced, state-of-the-art commercial technology.
(7) The need to protect the national technology and industrial base, to preserve and enhance the national technology employment base, and to provide for a defense mobilization base.
(8) A need to ensure that application of different rules of origin for United States end items and foreign end items does not result in an award to a firm other than a firm providing a product produced in the United States.
(9) Any need—
(A) to maintain the same source of supply for spare and replacement parts for an end item that qualifies as an American good; or
(B) to maintain the same source of supply for spare and replacement parts in order not to impair integration of the military and commercial industrial base.
(10) The national security interests of the United States.
(b) In this section, the term “goods which are other than American goods” means—
(1) an end product that is not mined, produced, or manufactured in the United States; or
(2) an end product that is manufactured in the United States but which includes components mined, produced, or manufactured outside the United States the aggregate cost of which exceeds the aggregate cost of the components of such end product that are mined, produced, or manufactured in the United States.
(Added Pub. L. 100–370, §3(a)(1), July 19, 1988, 102 Stat. 855, §2501; renumbered §2506, Pub. L. 100–456, div. A, title VIII, §821(b)(1)(A), Sept. 29, 1988, 102 Stat. 2014; renumbered §2533, Pub. L. 102–484, div. D, title XLII, §4202(a), Oct. 23, 1992, 106 Stat. 2659; amended Pub. L. 103–337, div. A, title VIII, §812(a), (b)(1), Oct. 5, 1994, 108 Stat. 2815, 2816; Pub. L. 104–106, div. D, title XLIII, §4321(b)(20), Feb. 10, 1996, 110 Stat. 673; Pub. L. 105–85, div. A, title X, §1073(a)(54), Nov. 18, 1997, 111 Stat. 1903.)
Section is based on Pub. L. 93–365, title VII, §707, Aug. 5, 1974, 88 Stat. 406.
The Buy American Act, referred to in subsec. (a), is title III of act Mar. 3, 1933, ch. 212, 47 Stat. 1520, as amended, which is classified generally to sections 10a, 10b, and 10c of Title 41, Public Contracts. For complete classification of this Act to the Code, see Short Title note set out under section 10a of Title 41 and Tables.
1997—Subsec. (a). Pub. L. 105–85 substituted “(41 U.S.C. 10a)” for “(41 U.S.C. 10a))”.
1996—Subsec. (a). Pub. L. 104–106 substituted “the Buy American Act (41 U.S.C. 10a)) whether application of such Act” for “title III of the Act of March 3, 1993 (41 U.S.C. 10a), popularly known as the ‘Buy American Act’, whether application of title III of such Act”.
1994—Pub. L. 103–337, §812(b)(1), substituted “Determinations of public interest under the Buy American Act” for “Limitation on use of funds: procurement of goods which are other than American goods” as section catchline.
Subsec. (a). Pub. L. 103–337, §812(a)(1), added subsec. (a) and struck out former subsec. (a) which read as follows: “Funds appropriated to the Department of Defense may not be obligated under a contract for procurement of goods which are other than American goods (as defined in subsection (c)) unless adequate consideration is given to the following:
“(1) The bids or proposals of firms located in labor surplus areas in the United States (as designated by the Department of Labor) which have offered to furnish American goods.
“(2) The bids or proposals of small business firms in the United States which have offered to furnish American goods.
“(3) The bids or proposals of all other firms in the United States which have offered to furnish American goods.
“(4) The United States balance of payments.
“(5) The cost of shipping goods which are other than American goods.
“(6) Any duty, tariff, or surcharge which may enter into the cost of using goods which are other than American goods.”
Subsecs. (b), (c). Pub. L. 103–337, §812(a), redesignated subsec. (c) as (b) and struck out former subsec. (b) which read as follows: “Consideration of the matters referred to in paragraphs (1) through (6) of subsection (a) shall be given under regulations of the Secretary of Defense and subject to the determinations and exceptions contained in title III of the Act of March 3, 1933 (41 U.S.C. 10a, 10b), popularly known as the ‘Buy American Act’.”
1992—Pub. L. 102–484 renumbered section 2506 of this title as this section.
For effective date and applicability of amendment by Pub. L. 104–106, see section 4401 of Pub. L. 104–106, set out as a note under section 251 of Title 41, Public Contracts.
(a)
(b)
(1) An article or item of—
(A) food;
(B) clothing and the materials and components thereof, other than sensors, electronics, or other items added to, and not normally associated with, clothing (and the materials and components thereof);
(C) tents, tarpaulins, or covers;
(D) cotton and other natural fiber products, woven silk or woven silk blends, spun silk yarn for cartridge cloth, synthetic fabric or coated synthetic fabric (including all textile fibers and yarns that are for use in such fabrics), canvas products, or wool (whether in the form of fiber or yarn or contained in fabrics, materials, or manufactured articles); or
(E) any item of individual equipment manufactured from or containing such fibers, yarns, fabrics, or materials.
(2) Hand or measuring tools.
(c)
(d)
(1) Procurements outside the United States in support of combat operations or procurements of any item listed in subsection (b)(1)(A), (b)(2), or (b)(3) in support of contingency operations.
(2) Procurements by vessels in foreign waters.
(3) Emergency procurements or procurements of perishable foods by, or for, an establishment located outside the United States for the personnel attached to such establishment.
(4) Procurements of any item listed in subsection (b)(1)(A), (b)(2), or (b)(3) for which the use of procedures other than competitive procedures has been approved on the basis of section 2304(c)(2) of this title, relating to unusual and compelling urgency of need.
(e)
(1) such procurement is necessary—
(A) to comply with agreements with foreign governments requiring the United States to purchase supplies from foreign sources for the purposes of offsetting sales made by the United States Government or United States firms under approved programs serving defense requirements; or
(B) in furtherance of agreements with foreign governments in which both such governments agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country; and
(2) any such agreement with a foreign government complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with section 2457 of this title.
(f)
(1) Foods manufactured or processed in the United States.
(2) Waste and byproducts of cotton and wool fiber for use in the production of propellants and explosives.
(g)
(h)
(i)
(j)
(k)
(Added Pub. L. 107–107, div. A, title VIII, §832(a)(1), Dec. 28, 2001, 115 Stat. 1189; amended Pub. L. 108–136, div. A, title VIII, §§826, 827, Nov. 24, 2003, 117 Stat. 1548; Pub. L. 109–163, div. A, title VIII, §§831, 833, Jan. 6, 2006, 119 Stat. 3388; Pub. L. 109–364, div. A, title VIII, §842(a)(3), Oct. 17, 2006, 120 Stat. 2337.)
2006—Subsec. (b)(1)(B). Pub. L. 109–163, §833(b), inserted before semicolon “and the materials and components thereof, other than sensors, electronics, or other items added to, and not normally associated with, clothing (and the materials and components thereof)”.
Subsec. (b)(2), (3). Pub. L. 109–364, §842(a)(3)(A), redesignated par. (3) as (2) and struck out former par. (2) which read as follows: “Specialty metals, including stainless steel flatware.”
Subsec. (c). Pub. L. 109–364, §842(a)(3)(B), struck out “or specialty metals (including stainless steel flatware)” after “subsection (b)(1)”.
Subsec. (d)(3). Pub. L. 109–163, §831, inserted “, or for,” after “perishable foods by”.
Subsec. (e). Pub. L. 109–364, §842(a)(3)(C), struck out “Specialty Metals and” after “Exception for” in heading and “specialty metals or” after “procurement of” in introductory provisions.
Subsec. (k). Pub. L. 109–163, §833(a), added subsec. (k).
2003—Subsec. (d). Pub. L. 108–136, §826(1), struck out “Outside the United States” after “Procurements” in heading.
Subsec. (d)(1). Pub. L. 108–136, §826(2), inserted “or procurements of any item listed in subsection (b)(1)(A), (b)(2), or (b)(3) in support of contingency operations” after “combat operations”.
Subsec. (d)(4). Pub. L. 108–136, §826(3), added par. (4).
Subsec. (f). Pub. L. 108–136, §827, substituted “
“(1) Foods”
for “
Pub. L. 109–364, div. A, title VIII, §842(a)(4)(B), Oct. 17, 2006, 120 Stat. 2337, provided that: “The amendments made by paragraph (3) [amending this section] shall take effect on the date occurring 30 days after the date of the enactment of this Act [Oct. 17, 2006].”
This section is popularly known as the “Berry Amendment”.
Pub. L. 109–163, div. A, title VIII, §832, Jan. 6, 2006, 119 Stat. 3388, provided that:
“(a)
“(b)
Pub. L. 108–287, title VIII, §8118, Aug. 5, 2004, 118 Stat. 998, provided that: “Notwithstanding any other provision of law, section 2533a(f) of title 10, United States Code, shall hereafter not apply to any fish, shellfish, or seafood product. This section applies to contracts and subcontracts for the procurement of commercial items notwithstanding section 34 of the Office of Federal Procurement Policy Act (41 U.S.C. 430).”
(a)
(1) the following types of end items, or components thereof, containing a specialty metal not melted or produced in the United States: aircraft, missile and space systems, ships, tank and automotive items, weapon systems, or ammunition; or
(2) a specialty metal that is not melted or produced in the United States and that is to be purchased directly by the Department of Defense or a prime contractor of the Department.
(b)
(2) This subsection applies to prime contracts and subcontracts at any tier under such contracts.
(c)
(1) Procurements outside the United States in support of combat operations or in support of contingency operations.
(2) Procurements for which the use of procedures other than competitive procedures has been approved on the basis of section 2304(c)(2) of this title, relating to unusual and compelling urgency of need.
(d)
(1) the procurement is necessary—
(A) to comply with agreements with foreign governments requiring the United States to purchase supplies from foreign sources for the purposes of offsetting sales made by the United States Government or United States firms under approved programs serving defense requirements; or
(B) in furtherance of agreements with foreign governments in which both such governments agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country; and
(2) any such agreement with a foreign government complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with section 2457 of this title.
(e)
(f)
(g)
(h)
(i)
(1) Steel—
(A) with a maximum alloy content exceeding one or more of the following limits: manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent; or
(B) containing more than 0.25 percent of any of the following elements: aluminum, chromium, cobalt, columbium, molybdenum, nickel, titanium, tungsten, or vanadium.
(2) Metal alloys consisting of nickel, iron-nickel, and cobalt base alloys containing a total of other alloying metals (except iron) in excess of 10 percent.
(3) Titanium and titanium alloys.
(4) Zirconium and zirconium base alloys.
(j)
(1) The term “United States” includes possessions of the United States.
(2) The term “component” has the meaning provided in section 4 of the Office of Federal Procurement Policy Act (41 U.S.C. 403).
(Added Pub. L. 109–364, div. A, title VIII, §842(a)(1), Oct. 17, 2006, 120 Stat. 2335.)
Pub. L. 109–364, div. A, title VIII, §842(a)(4)(A), Oct. 17, 2006, 120 Stat. 2337, provided that: “Section 2533b of title 10, United States Code, as added by paragraph (1), shall apply with respect to contracts entered into after the date occurring 30 days after the date of the enactment of this Act [Oct. 17, 2006].”
Pub. L. 109–364, div. A, title VIII, §842(b), Oct. 17, 2006, 120 Stat. 2337, provided that:
“(1)
“(A) the contracting officer for the contract determines in writing that—
“(i) it would not be practical or economical to remove or replace the specialty metals incorporated in such items or to substitute items containing compliant materials;
“(ii) the prime contractor and subcontractor responsible for providing items containing non-compliant materials have in place an effective plan to ensure compliance with section 2533b of title 10, United States Code (as so added), with regard to items containing specialty metals if such metals were incorporated into items produced, manufactured, or assembled in the United States after the date of the enactment of this Act [Oct. 17, 2006]; and
“(iii) the non-compliance is not knowing or willful; and
“(B) the Under Secretary of Defense for Acquisition, Technology, and Logistics or the service acquisition executive of the military department concerned approves the determination.
“(2)
“(3)
“(4)
(a)
(1)
(2)
(3)
(i) Air circuit breakers.
(ii) Welded shipboard anchor and mooring chain with a diameter of four inches or less.
(iii) Vessel propellers with a diameter of six feet or more.
(B) The following components of vessels, to the extent they are unique to marine applications: gyrocompasses, electronic navigation chart systems, steering controls, pumps, propulsion and machinery control systems, and totally enclosed lifeboats.
(4)
(A) Powered and non-powered valves in Federal Supply Classes 4810 and 4820 used in piping for naval surface ships and submarines.
(B) Machine tools in the Federal Supply Classes for metal-working machinery numbered 3405, 3408, 3410 through 3419, 3426, 3433, 3438, 3441 through 3443, 3445, 3446, 3448, 3449, 3460, and 3461.
(5)
(b)
(1)
(2)
(A) meets the requirement set forth in paragraph (1);
(B) is an existing producer under the industrial preparedness program at the time the contract is awarded;
(C) has received all required regulatory approvals; and
(D) when the contract for the procurement is awarded, has in existence in the national technology and industrial base the plant, equipment, and personnel necessary to perform the contract.
(3)
(A) the manufacturer meets the requirements set forth in paragraph (1); and
(B) all castings incorporated into such propellers are poured and finished in the United States.
(c)
(1)
(2)
(i) A contract for procurement of such an item for use in property under the control of the Department of Defense, including any Government-owned, contractor-operated facility.
(ii) A contract that is entered into by a contractor on behalf of the Department of Defense for the purpose of providing such an item to another contractor as Government-furnished equipment.
(B) In any case in which a contract for items described in subsection (a)(4) includes the procurement of more than one Federal Supply Class of machine tools or machine tools and accessories, each supply class shall be evaluated separately for purposes of determining whether the limitation in subsection (a) applies.
(C) Subsection (a)(4) and this paragraph shall cease to be effective on October 1, 1996.
(3)
(4)
(d)
(1) Application of the limitation would cause unreasonable costs or delays to be incurred.
(2) United States producers of the item would not be jeopardized by competition from a foreign country, and that country does not discriminate against defense items produced in the United States to a greater degree than the United States discriminates against defense items produced in that country.
(3) Application of the limitation would impede cooperative programs entered into between the Department of Defense and a foreign country, or would impede the reciprocal procurement of defense items under a memorandum of understanding providing for reciprocal procurement of defense items that is entered into under section 2531 of this title, and that country does not discriminate against defense items produced in the United States to a greater degree than the United States discriminates against defense items produced in that country.
(4) Satisfactory quality items manufactured by an entity that is part of the national technology and industrial base (as defined in section 2500(1) of this title) are not available.
(5) Application of the limitation would result in the existence of only one source for the item that is an entity that is part of the national technology and industrial base (as defined in section 2500(1) of this title).
(6) The procurement is for an amount less than the simplified acquisition threshold and simplified purchase procedures are being used.
(7) Application of the limitation is not in the national security interests of the United States.
(8) Application of the limitation would adversely affect a United States company.
(e)
(1)
(2)
(3)
(f)
(1) specifically refers to this section;
(2) specifically states that such provision of law modifies or supersedes the provisions of this section; and
(3) specifically identifies the particular domestic source involved and states that the contract to be awarded pursuant to such provision of law is being awarded in contravention of this section.
(g)
(2) Paragraph (1) does not apply to contracts for items described in subsection (a)(5) (relating to ball bearings and roller bearings), notwithstanding section 33 of the Office of Federal Procurement Policy Act (41 U.S.C. 429).
(h)
(1) may not use contract clauses or certifications; and
(2) shall use management and oversight techniques that achieve the objective of the subsection without imposing a significant management burden on the Government or the contractor involved.
(i)
(2) This subsection applies to the waiver authority provided by subsection (d) on the basis of the applicability of paragraph (2) or (3) of that subsection.
(3) The waiver authority described in paragraph (2) may not be delegated below the Under Secretary of Defense for Acquisition, Technology, and Logistics.
(4) At least 15 days before the effective date of any waiver made under the waiver authority described in paragraph (2), the Secretary shall publish in the Federal Register and submit to the congressional defense committees a notice of the determination to exercise the waiver authority.
(5) Any waiver made by the Secretary under the waiver authority described in paragraph (2) shall be in effect for a period not greater than one year, as determined by the Secretary.
(j)
(A) the amount of the purchase does not exceed $2,500;
(B) the precision level of the ball or roller bearings to be procured under the contract or subcontract is rated lower than the rating known as Annual Bearing Engineering Committee (ABEC) 5 or Roller Bearing Engineering Committee (RBEC) 5, or an equivalent of such rating;
(C) at least two manufacturers in the national technology and industrial base that are capable of producing the ball or roller bearings have not responded to a request for quotation issued by the contracting activity for that contract or subcontract; and
(D) no bearing to be procured under the contract or subcontract has a basic outside diameter (exclusive of flange diameters) in excess of 30 millimeters.
(2) Paragraph (1) does not apply to a purchase if such purchase would result in the total amount of purchases of ball bearings and roller bearings to satisfy requirements under Department of Defense contracts, using the authority provided in such paragraph, to exceed $200,000 during the fiscal year of such purchase.
(Added Pub. L. 97–295, §1(29)(A), Oct. 12, 1982, 96 Stat. 1294, §2400; amended Pub. L. 100–180, div. A, title I, §124(a), (b)(1), title VIII, §824(a), Dec. 4, 1987, 101 Stat. 1042, 1043, 1134; renumbered §2502 and amended Pub. L. 100–370, §3(b)(1), July 19, 1988, 102 Stat. 855; renumbered §2507 and amended Pub. L. 100–456, div. A, title VIII, §§821(b)(1)(A), 822, Sept. 29, 1988, 102 Stat. 2014, 2017; Pub. L. 101–510, div. A, title VIII, §835(a), title XIV, §1421, Nov. 5, 1990, 104 Stat. 1614, 1682; Pub. L. 102–190, div. A, title VIII, §§834, 835, Dec. 5, 1991, 105 Stat. 1447, 1448; renumbered §2534 and amended Pub. L. 102–484, div. A, title VIII, §§831, 833(a), title X, §1052(33), div. D, title XLII, §§4202(a), 4271(b)(4), Oct. 23, 1992, 106 Stat. 2460, 2461, 2501, 2659, 2696; Pub. L. 103–160, div. A, title IX, §904(d)(1), Nov. 30, 1993, 107 Stat. 1728; Pub. L. 103–337, div. A, title VIII, §814, Oct. 5, 1994, 108 Stat. 2817; Pub. L. 103–355, title IV, §4102(i), Oct. 13, 1994, 108 Stat. 3341; Pub. L. 104–106, div. A, title VIII, §806(a)(1)–(4), (b)–(d), title XV, §1503(a)(30), Feb. 10, 1996, 110 Stat. 390, 391, 512; Pub. L. 104–201, div. A, title VIII, §810, title X, §1074(a)(14), Sept. 23, 1996, 110 Stat. 2608, 2659; Pub. L. 105–85, div. A, title III, §371(d)(1), title VIII, §811(a), title X, §1073(a)(55), Nov. 18, 1997, 111 Stat. 1706, 1839, 1903; Pub. L. 106–398, §1 [[div. A], title VIII, §805], Oct. 30, 2000, 114 Stat. 1654, 1654A–207; Pub. L. 107–107, div. A, title VIII, §835(a), title X, §1048(b)(2), Dec. 28, 2001, 115 Stat. 1191, 1225; Pub. L. 108–136, div. A, title VIII, §828, Nov. 24, 2003, 117 Stat. 1548.)
Revised section | Source (U.S. Code) | Source (Statutes at Large) |
---|---|---|
2400 | 10:2303 (note). | Sept. 20, 1968, Pub. L. 90–500, §404, 82 Stat. 851. |
The words “of the United States under the provisions of this Act or the provisions of any other law” are omitted as surplus. The word “acquisition” is substituted for “purchase, lease, rental, or other acquisition” because it is inclusive. The words “this section” are substituted for “this prohibition” because of the restatement.
2003—Subsec. (a)(5). Pub. L. 108–136 inserted before period at end “, except ball bearings and roller bearings being procured for use in an end product manufactured by a manufacturer that does not satisfy the requirements of subsection (b) or in a component part manufactured by such a manufacturer”.
2001—Subsec. (i)(3). Pub. L. 107–107, §1048(b)(2), substituted “Under Secretary of Defense for Acquisition, Technology, and Logistics” for “Under Secretary of Defense for Acquisition and Technology”.
Subsec. (j). Pub. L. 107–107, §835(a), added subsec. (j).
2000—Subsec. (c)(3). Pub. L. 106–398 substituted “October 1, 2005” for “October 1, 2000”.
1997—Subsec. (b)(3). Pub. L. 105–85, §1073(a)(55), substituted “(a)(3)(A)(iii)” for “(a)(3)(A)(ii)”.
Subsec. (d)(4), (5). Pub. L. 105–85, §371(d)(1), substituted “section 2500(1)” for “section 2491(1)”.
Subsec. (i). Pub. L. 105–85, §811(a), added subsec. (i).
1996—Subsec. (a)(3). Pub. L. 104–106, §806(a)(1), amended par. (3) generally. Prior to amendment, par. (3) read as follows: “
Subsec. (b)(3). Pub. L. 104–106, §806(a)(2), added par. (3).
Subsec. (c). Pub. L. 104–106, §1503(a)(30), substituted “
Subsec. (c)(1). Pub. L. 104–106, §806(a)(3), amended par. (1) generally. Prior to amendment, par. (1) read as follows: “
Subsec. (c)(3). Pub. L. 104–106, §806(b), substituted “October 1, 2000” for “October 1, 1995”.
Subsec. (c)(4). Pub. L. 104–201, §1074(a)(14), substituted “February 10, 1998” for “the date occurring two years after the date of the enactment of the National Defense Authorization Act for Fiscal Year 1996”.
Pub. L. 104–106, §806(c), added par. (4).
Subsec. (d)(3). Pub. L. 104–201, §810, inserted “or would impede the reciprocal procurement of defense items under a memorandum of understanding providing for reciprocal procurement of defense items that is entered into under section 2531 of this title,” after “a foreign country,”.
Subsec. (g). Pub. L. 104–106, §806(d), designated existing provisions as par. (1) and added par. (2).
Subsec. (h). Pub. L. 104–106, §806(a)(4), added subsec. (h).
1994—Pub. L. 103–337 amended section generally. Prior to amendment, section consisted of subsecs. (a) to (f) relating to acquisition of multipassenger motor vehicles, chemical weapons antidote, valves and machine tools, carbonyl iron powders, air circuit breakers, and sonobuoys.
Subsec. (g). Pub. L. 103–355 added subsec. (g).
1993—Subsec. (b)(2). Pub. L. 103–160 substituted “Under Secretary of Defense for Acquisition and Technology” for “Under Secretary of Defense for Acquisition”.
1992—Pub. L. 102–484, §§4202(a), 4271(b)(4), renumbered section 2507 of this title as this section and substituted “Miscellaneous limitations on the procurement of goods other than United States goods” for “Miscellaneous procurement limitations” in section catchline.
Subsec. (c). Pub. L. 102–484, §831, redesignated subsec. (d) as (c) and struck out former subsec. (c) which read as follows: “
Subsec. (d). Pub. L. 102–484, §831(b), redesignated subsec. (e) as (d). Former subsec. (d) redesignated (c).
Subsec. (d)(3)(A). Pub. L. 102–484, §1052(33), substituted “Government-owned” for “government-owned”.
Subsec. (e). Pub. L. 102–484, §831(b), redesignated subsec. (f) as (e). Former subsec. (e) redesignated (d).
Subsec. (f). Pub. L. 102–484, §833(a), added subsec. (f). Former subsec. (f) redesignated (e).
1991—Subsec. (d)(1). Pub. L. 102–190, §834(a), substituted “Effective through fiscal year 1996” for “During fiscal years 1989, 1990, and 1991”.
Subsec. (d)(3) to (5). Pub. L. 102–190, §834(b), added pars. (3) and (4), redesignated former par. (3) as (5), and struck out former par. (4) which read as follows: “The provisions of this section may be renewed with respect to any item by the Secretary of Defense at the end of fiscal year 1991 for an additional two fiscal years if the Secretary determines that a continued restriction on that item is in the national security interest.”
Subsec. (e)(1). Pub. L. 102–190, §835(1), substituted “Until January 1, 1993, the Secretary” for “The Secretary”.
Subsec. (e)(3). Pub. L. 102–190, §835(2), (4), redesignated par. (4) as (3) and struck out former par. (3) which read as follows: “After September 30, 1994, the Secretary may terminate the restriction required under paragraph (1) if the Secretary determines that continuing the restriction is not in the national interest.”
Subsec. (e)(3)(A). Pub. L. 102–190, §835(3), struck out before period “by an entity more than 50 percent of which is owned or controlled by citizens of the United States or Canada”.
Subsec. (e)(4). Pub. L. 102–190, §835(4), redesignated par. (4) as (3).
1990—Subsec. (e). Pub. L. 101–510, §835(a), added subsec. (e).
Subsec. (f). Pub. L. 101–510, §1421, added subsec. (f).
1988—Pub. L. 100–370, and Pub. L. 100–456, §821(b)(1)(A), successively renumbered section 2400 of this title as section 2502 of this title and then as this section.
Subsec. (a). Pub. L. 100–370 substituted “this subsection” for “this section”.
Subsec. (d). Pub. L. 100–456, §822, added subsec. (d).
1987—Pub. L. 100–180 substituted “Miscellaneous procurement limitations” for “Limitation on procurement of buses” in section catchline, designated existing provisions as subsec. (a) and added heading, and added subsecs. (b) and (c).
Pub. L. 107–107, div. A, title VIII, §835(b), Dec. 28, 2001, 115 Stat. 1192, provided that: “Subsection (j) of such section 2534 (as added by subsection (a)) shall apply with respect to a contract or subcontract to purchase ball bearings or roller bearings entered into after the date of the enactment of this Act [Dec. 28, 2001].”
Section 811(b) of Pub. L. 105–85 provided that: “Subsection (i) of section 2534 of such title [10 U.S.C. 2534(i)], as added by subsection (a), shall apply with respect to—
“(1) contracts and subcontracts entered into on or after the date of the enactment of this Act [Nov. 18, 1997]; and
“(2) options for the procurement of items that are exercised after such date under contracts that are entered into before such date if the option prices are adjusted for any reason other than the application of a waiver granted under subsection (d) of such section 2534, on the basis of the applicability of paragraph (2) or (3) of that subsection.”
Section 806(a)(5) of Pub. L. 104–106 provided that: “Subsection (a)(3)(B) of section 2534 of title 10, United States Code, as amended by paragraph (1), shall apply only to contracts entered into after March 31, 1996.”
For effective date and applicability of amendment by Pub. L. 103–355, see section 10001 of Pub. L. 103–355, set out as a note under section 251 of Title 41, Public Contracts.
Section 833(b) of Pub. L. 102–484 provided that: “Subsection (f) of section 2534 of title 10, United States Code, as added by subsection (a), shall apply with respect to solicitations for contracts issued after the expiration of the 120-day period beginning on the date of the enactment of this Act [Oct. 23, 1992].”
Section 835(b) of Pub. L. 101–510 provided that subsec. (e) of this section, as added by section 835(a) of Pub. L. 101–510, applied with respect to systems or items procured by or provided to Department of Defense after Nov. 5, 1990.
Pub. L. 108–136, div. A, title VIII, §821, Nov. 24, 2003, 117 Stat. 1546, provided that:
“(a)
“(b)
“(c)
“(d)
“(2) With respect to contracts in existence on the date of the enactment of this Act, the Secretary of Defense shall take such action as is necessary to ensure that such contracts are in compliance with subsection (b) not later than 24 months after such date.”
(a)
(1) to provide a comprehensive and continuous program for the future safety and for the defense of the United States by providing adequate measures whereby an essential nucleus of Government-owned industrial plants and an industrial reserve of machine tools and other industrial manufacturing equipment may be assured for immediate use to supply the needs of the armed forces in time of national emergency or in anticipation thereof;
(2) that such Government-owned plants and such reserve shall not exceed in number or kind the minimum requirements for immediate use in time of national emergency, and that any such items which shall become excess to such requirements shall be disposed of as expeditiously as possible;
(3) that to the maximum extent practicable, reliance will be placed upon private industry for support of defense production; and
(4) that machine tools and other industrial manufacturing equipment may be held in plant equipment packages or in a general reserve to maintain a high state of readiness for production of critical items of defense materiel, to provide production capacity not available in private industry for defense materiel, or to assist private industry in time of national disaster.
(b)
(A) determine which industrial plants and installations (including machine tools and other industrial manufacturing equipment) should become a part of the Defense Industrial Reserve;
(B) designate what excess industrial property shall be disposed of;
(C) establish general policies and provide for the transportation, handling, care, storage, protection, maintenance, repair, rebuilding, utilization, recording, leasing and security of such property;
(D) direct the transfer without reimbursement of such property to other Government agencies with the consent of such agencies;
(E) direct the leasing of any of such property to designated lessees;
(F) authorize the disposition in accordance with existing law of any of such property when in the opinion of the Secretary such property is no longer needed by the Department of Defense; and
(G) notwithstanding chapter 5 of title 40 and any other provision of law, authorize the transfer to a nonprofit educational institution or training school, on a nonreimbursable basis, of any such property already in the possession of such institution or school whenever the program proposed by such institution or school for the use of such property is in the public interest.
(2)(A) The Secretary of a military department to which equipment or other property is transferred from the Defense Industrial Reserve shall reimburse appropriations available for the purposes of the Defense Industrial Reserve for the full cost (including direct and indirect costs) of—
(i) storage of such property;
(ii) repair and maintenance of such property; and
(iii) overhead allocated to such property.
(B) The Secretary of Defense shall prescribe regulations establishing general policies and fee schedules for reimbursements under subparagraph (A).
(c)
(1) The term “Defense Industrial Reserve” means—
(A) a general reserve of industrial manufacturing equipment, including machine tools, selected by the Secretary of Defense for retention for national defense or for other emergency use;
(B) those industrial plants and installations held by and under the control of the Department of Defense in active or inactive status, including Government-owned/Government-operated plants and installations and Government-owned/contractor-operated plants and installations which are retained for use in their entirety, or in part, for production of military weapons systems, munitions, components, or supplies; and
(C) those industrial plants and installations under the control of the Secretary which are not required for the immediate need of any department or agency of the Government and which should be sold, leased, or otherwise disposed of.
(2) The term “plant equipment package” means a complement of active and idle machine tools and other industrial manufacturing equipment held by and under the control of the Department of Defense and approved by the Secretary for retention to produce particular defense materiel or defense supporting items at a specific level of output in the event of emergency.
(Added and amended Pub. L. 102–484, div. D, title XLII, §4235, Oct. 23, 1992, 106 Stat. 2690; Pub. L. 103–35, title II, §201(c)(8), May 31, 1993, 107 Stat. 98; Pub. L. 103–337, div. A, title III, §379(a), Oct. 5, 1994, 108 Stat. 2737; Pub. L. 107–107, div. A, title X, §1048(a)(23), Dec. 28, 2001, 115 Stat. 1224; Pub. L. 107–217, §3(b)(7), Aug. 21, 2002, 116 Stat. 1295.)
The text of section 451 of Title 50, War and National Defense, which was transferred to this section, designated subsec. (a), and amended by Pub. L. 102–484, §4235(a)(2), was based on acts July 2, 1948, ch. 811, §2, 62 Stat. 1225; Nov. 16, 1973, Pub. L. 93–155, title VIII, §809, 87 Stat. 617.
The text of section 453 of Title 50 which was transferred to this section, designated subsec. (b), and amended by Pub. L. 102–484, §4235(a)(3), was based on acts July 2, 1948, ch. 811, §4, 62 Stat. 1226; Nov. 16, 1973, Pub. L. 93–155, title VIII, §809, 87 Stat. 617; Nov. 14, 1986, Pub. L. 99–661, div. A, title XIII, §1359(a), 100 Stat. 3999. For effective date of 1986 amendment, see section 1359(b) of Pub. L. 99–661.
The text of section 452 of Title 50 which was transferred to this section, designated subsec. (c), and amended by Pub. L. 102–484, §4235(b), was based on acts July 2, 1948, ch. 811, §3, 62 Stat. 1225; Nov. 16, 1973, Pub. L. 93–155, title VIII, §809, 87 Stat. 617.
2002—Subsec. (b)(1)(G). Pub. L. 107–217 substituted “chapter 5 of title 40” for “title II of the Federal Property and Administrative Services Act of 1949 (40 U.S.C. 481 et seq.)”.
2001—Subsec. (a). Pub. L. 107–107, §1048(a)(23)(A)(i), substituted “intent of Congress—” for “intent of Congress” in introductory provisions.
Subsec. (a)(1). Pub. L. 107–107, §1048(a)(23)(A)(ii), (iii), substituted “armed forces” for “Armed Forces” and realigned margins.
Subsec. (a)(2) to (4). Pub. L. 107–107, §1048(a)(23)(A)(ii), realigned margins.
Subsec. (b)(1). Pub. L. 107–107, §1048(a)(23)(B)(i), substituted “in subsection (a), the Secretary of Defense shall—” for “in this section, the Secretary is authorized and directed to—” in introductory provisions.
Subsec. (b)(1)(A). Pub. L. 107–107, §1048(a)(23)(B)(ii), substituted “Defense Industrial Reserve” for “defense industrial reserve”.
Subsec. (c). Pub. L. 107–107, §1048(a)(23)(C), redesignated par. (2) as (1), substituted “means—” for “means” in introductory provisions, realigned margins of subpars. (A) to (C) of par. (1) and inserted “and” after semicolon in subpar. (B), redesignated par. (3) as (2), and struck out former par. (1) which read as follows: “The term ‘Secretary’ means Secretary of Defense.”
1994—Subsec. (b)(1)(G). Pub. L. 103–337 amended subpar. (G) generally. Prior to amendment, subpar. (G) read as follows: “authorize and regulate the lending of any such property to any nonprofit educational institution or training school whenever (i) the program proposed by such institution or school for the use of such property will contribute materially to national defense, and (ii) such institution or school shall by agreement make such provision as the Secretary shall deem satisfactory for the proper maintenance and care of such property and for its return, without expense to the Government, upon request of the Secretary.”
1993—Subsec. (b)(2)(B). Pub. L. 103–35 substituted “subparagraph (A)” for “paragraph (1)”.
1992—Pub. L. 102–484, §4235(a), added section number and catchline.
Subsec. (a). Pub. L. 102–484, §4235(a)(2), transferred the text of section 451 of Title 50, War and National Defense, to this section, designated it subsec. (a), inserted heading, and substituted “It” for “In enacting this chapter it” in introductory provisions. See Codification note above.
Subsec. (b). Pub. L. 102–484, §4235(a)(3), transferred the text of section 453 of Title 50, War and National Defense, to the end of this section and designated it subsec. (b), inserted heading, redesignated former subsec. (a) of section 453 as par. (1), substituted “in this section” for “in this chapter” in introductory provisions, redesignated former pars. (1) to (7) as subpars. (A) to (G), respectively, in subpar. (G) redesignated former subpars. (A) and (B) as cls. (i) and (ii), respectively, redesignated former subsec. (b) of section 453 as par. (2), and in par. (2) redesignated former par. (1) as subpar. (A), former subpars. (A) to (C) as cls. (i) to (iii), and former par. (2) as subpar. (B). See Codification note above.
Subsec. (c). Pub. L. 102–484, §4235(b), transferred the text of section 452 of Title 50, War and National Defense, to the end of this section, designated it subsec. (c), inserted heading, and substituted “In this section:” for “As used in this chapter—” in introductory provisions. See Codification note above.
Section 379(b) of Pub. L. 103–337 provided that: “Except for property determined by the Secretary of Defense to be needed by the Department of Defense, property loaned before December 31, 1993, to an educational institution or training school under section 2535(b) of title 10, United States Code, or section 4(a)(7) of the Defense Industrial Reserve Act (as in effect before October 23, 1992 [former section 453(a)(7) of Title 50, War and National Defense, see Codification and 1992 Amendment notes above]) shall be regarded as surplus property. Upon certification by the Secretary to the Administrator of General Services that the property is being used by the borrowing educational institution or training school for a purpose consistent with that for which the property was loaned, the Administrator may authorize the conveyance of all right, title, and interest of the United States in such property to the borrower if the borrower agrees to accept the property. The Administrator may require any additional terms and conditions in connection with a conveyance so authorized that the Administrator considers appropriate to protect the interests of the United States.”
(a)
(b)
(A) the Secretary concerned determines that the waiver is essential to the national security interests of the United States; or
(B) in the case of a contract awarded for environmental restoration, remediation, or waste management at a Department of Defense or Department of Energy facility—
(i) the Secretary concerned determines that the waiver will advance the environmental restoration, remediation, or waste management objectives of the department concerned and will not harm the national security interests of the United States; and
(ii) the entity to which the contract is awarded is controlled by a foreign government with which the Secretary concerned is authorized to exchange Restricted Data under section 144 c. of the Atomic Energy Act of 1954 (42 U.S.C. 2164(c)).
(2) The Secretary concerned shall notify Congress of any decision to grant a waiver under paragraph (1)(B) with respect to a contract. The contract may be awarded only after the end of the 45-day period beginning on the date the notification is received by the committees.
(c)
(1) The term “entity controlled by a foreign government” includes—
(A) any domestic or foreign organization or corporation that is effectively owned or controlled by a foreign government; and
(B) any individual acting on behalf of a foreign government,
as determined by the Secretary concerned. Such term does not include an organization or corporation that is owned, but is not controlled, either directly or indirectly, by a foreign government if the ownership of that organization or corporation by that foreign government was effective before October 23, 1992.
(2) The term “proscribed category of information” means a category of information that—
(A) with respect to Department of Defense contracts—
(i) includes special access information;
(ii) is determined by the Secretary of Defense to include information the disclosure of which to an entity controlled by a foreign government is not in the national security interests of the United States; and
(iii) is defined in regulations prescribed by the Secretary of Defense for the purposes of this section; and
(B) with respect to Department of Energy contracts—
(i) is determined by the Secretary of Energy to include information described in subparagraph (A)(ii); and
(ii) is defined in regulations prescribed by the Secretary of Energy for the purposes of this section.
(3) The term “Secretary concerned” means—
(A) the Secretary of Defense, with respect to Department of Defense contracts; and
(B) the Secretary of Energy, with respect to Department of Energy contracts.
(Added Pub. L. 102–484, div. A, title VIII, §836(a)(1), Oct. 23, 1992, 106 Stat. 2462; amended Pub. L. 103–35, title II, §201(d)(4), May 31, 1993, 107 Stat. 99; Pub. L. 103–160, div. A, title VIII, §842(a)–(c)(1), Nov. 30, 1993, 107 Stat. 1719; Pub. L. 104–201, div. A, title VIII, §828, Sept. 23, 1996, 110 Stat. 2611.)
1996—Subsec. (b). Pub. L. 104–201 amended subsec. (b) generally. Prior to amendment, subsec. (b) read as follows: “
1993—Pub. L. 103–160, §842(c)(1), substituted “Award of certain contracts to entities controlled by a foreign government: prohibition” for “Prohibition on award of certain Department of Defense and Department of Energy contracts to companies owned by an entity controlled by a foreign government.” as section catchline.
Pub. L. 103–35 struck out period at end of section catchline.
Subsec. (a). Pub. L. 103–160, §842(a), struck out “a company owned by” after “awarded to” and substituted “that entity” for “that company”.
Subsec. (c)(1). Pub. L. 103–160, §842(b), inserted at end “Such term does not include an organization or corporation that is owned, but is not controlled, either directly or indirectly, by a foreign government if the ownership of that organization or corporation by that foreign government was effective before October 23, 1992.”
Section 836(b) of Pub. L. 102–484 provided that: “Section 2536 of title 10, United States Code, as added by subsection (a), shall apply with respect to contracts entered into after the expiration of the 90-day period beginning on the date of the enactment of this Act [Oct. 23, 1992].”
(a)
(b)
(c)
(2) The entities referred to in paragraph (1) are the following:
(A) The Defense Intelligence Agency.
(B) The Army Foreign Technology Science Center.
(C) The Naval Maritime Intelligence Center.
(D) The Air Force Foreign Aerospace Science and Technology Center.
(Added Pub. L. 102–484, div. A, title VIII, §838(a), Oct. 23, 1992, 106 Stat. 2465; amended Pub. L. 103–35, title II, §201(d)(5), (h)(2), May 31, 1993, 107 Stat. 99, 100; Pub. L. 107–314, div. A, title X, §1041(a)(16), Dec. 2, 2002, 116 Stat. 2645.)
2002—Subsec. (a). Pub. L. 107–314 substituted “$10,000,000” for “$100,000”.
1993—Subsec. (a). Pub. L. 103–35, §201(d)(5), substituted “respectively, that” for “respectively, which”.
Subsec. (d). Pub. L. 103–35, §201(h)(2), struck out subsec. (d) which read as follows: “In this section, the term ‘defense critical technology’ has the meaning provided that term by section 2491(8) of this title.”
(a)
(b)
(c)
(1) to give precedence to the order as prescribed in subsection (b);
(2) to manufacture the kind, quantity, or quality of arms or ammunition, parts thereof, or necessary supplies, as ordered by the head of such department; or
(3) to furnish them at a reasonable price as determined by the head of such department.
(d)
(e)
(f)
(Added Pub. L. 103–160, div. A, title VIII, §822(a)(1), Nov. 30, 1993, 107 Stat. 1704; amended Pub. L. 103–337, div. A, title VIII, §811, Oct. 5, 1994, 108 Stat. 2815.)
Provisions similar to those in this section were contained in sections 4501 and 9501 of this title, prior to repeal by Pub. L. 103–160, §822(a)(2).
1994—Subsec. (a). Pub. L. 103–337, §811(1), substituted “head of any department” for “Secretary of Defense”.
Subsec. (c). Pub. L. 103–337, §811, substituted “through the head of any department” for “through the Secretary of Defense” and “opinion of the head of that department” for “opinion of the Secretary of Defense” in introductory provisions and “head of such department” for “Secretary” in pars. (2) and (3).
Subsec. (d). Pub. L. 103–337, §811(1), substituted “head of any department” for “Secretary of Defense”.
(a)
(b)
(c)
(Added Pub. L. 103–160, div. A, title VIII, §822(a)(1), Nov. 30, 1993, 107 Stat. 1705.)
Provisions similar to those in this section were contained in sections 4502(a)–(c) and 9502(a)–(c) of this title, prior to repeal by Pub. L. 103–160, §822(a)(2).
The President may appoint a nonpartisan Board on Mobilization of Industries Essential for Military Preparedness, and may provide necessary clerical assistance, to organize and coordinate operations under sections 2538 and 2539 of this title.
(Added Pub. L. 103–160, div. A, title VIII, §822(a)(1), Nov. 30, 1993, 107 Stat. 1705, §2540; renumbered §2539a, Pub. L. 103–337, div. A, title X, §1070(a)(13)(A), Oct. 5, 1994, 108 Stat. 2856.)
Provisions similar to those in this section were contained in sections 4502(d) and 9502(d) of this title, prior to repeal by Pub. L. 103–160, §822(a)(2).
1994—Pub. L. 103–337 renumbered section 2540 of this title as this section.
(a)
(1) sell, rent, lend, or give samples, drawings, and manufacturing or other information (subject to the rights of third parties) to any person or entity;
(2) sell, rent, or lend government equipment or materials to any person or entity—
(A) for use in independent research and development programs, subject to the condition that the equipment or material be used exclusively for such research and development; or
(B) for use in demonstrations to a friendly foreign government; and
(3) make available to any person or entity, at an appropriate fee, the services of any government laboratory, center, range, or other testing facility for the testing of materials, equipment, models, computer software, and other items.
(b)
(c)
(d)
(Added Pub. L. 103–160, div. A, title VIII, §822(b)(1), Nov. 30, 1993, 107 Stat. 1705, §2541; renumbered §2539b, Pub. L. 103–337, div. A, title X, §1070(a)(13)(A), Oct. 5, 1994, 108 Stat. 2856; amended Pub. L. 103–355, title III, §3022, Oct. 13, 1994, 108 Stat. 3333; Pub. L. 104–106, div. A, title VIII, §804, div. D, title XLIII, §4321(a)(8), Feb. 10, 1996, 110 Stat. 390, 671; Pub. L. 106–65, div. A, title X, §1066(a)(23), Oct. 5, 1999, 113 Stat. 771.)
1999—Subsec. (a). Pub. L. 106–65 substituted “Secretaries of the military departments” for “secretaries of the military departments”.
1996—Subsec. (a). Pub. L. 104–106, §4321(a)(8), made technical correction to Pub. L. 103–355, §3022. See 1994 Amendment note below.
Subsec. (c). Pub. L. 104–106, §804, inserted “and indirect” after “recoup the direct”.
1994—Pub. L. 103–337 renumbered section 2541 of this title as this section.
Subsec. (a). Pub. L. 103–355, §3022, as amended by Pub. L. 104–106, §4321(a)(8), inserted “rent,” after “sell,” in par. (1) and “, rent,” after “sell” in par. (2).
Section 4321(a) of Pub. L. 104–106 provided that the amendment made by that section is effective as of Oct. 13, 1994, and as if included in Pub. L. 103–355 as enacted.
(a)
(b)
(1) A member nation of the North Atlantic Treaty Organization (NATO).
(2) A country designated as of March 31, 1995, as a major non-NATO ally pursuant to section 2350a(i)(3) of this title, as in effect on that date.
(3) A country in Central Europe that, as determined by the Secretary of State—
(A) has changed its form of national government from a nondemocratic form of government to a democratic form of government since October 1, 1989; or
(B) is in the process of changing its form of national government from a nondemocratic form of government to a democratic form of government.
(4) A noncommunist country that was a member nation of the Asia Pacific Economic Cooperation (APEC) as of October 31, 1993.
(c)
(Added Pub. L. 104–106, div. A, title XIII, §1321(a)(1), Feb. 10, 1996, 110 Stat. 475; amended Pub. L. 108–375, div. A, title X, §1084(d)(21), Oct. 28, 2004, 118 Stat. 2062.)
A prior section 2540, acts Aug. 10, 1956, ch. 1041, 70A Stat. 141, §2511; renumbered §2521, Nov. 5, 1990, Pub. L. 101–510, div. A, title VIII, §823(a)(2), 104 Stat. 1600; renumbered §2540, Dec. 5, 1991, Pub. L. 102–190, div. A, title VIII, §821(e)(3), 105 Stat. 1432, related to availability or issuance to reserve components of supplies, services, and facilities of armed forces, prior to repeal by Pub. L. 103–337, div. A, title XVI, §§1664(c)(2), 1691, Oct. 5, 1994, 108 Stat. 3012, 3026, effective Dec. 1, 1994. See section 18502 of this title.
Another prior section 2540 was renumbered section 2539a of this title.
2004—Subsec. (b)(2). Pub. L. 108–375 inserted “, as in effect on that date” before period at end.
Pub. L. 108–287, title VIII, §8065, Aug. 5, 2004, 118 Stat. 985, provided that: “To the extent authorized by subchapter VI of chapter 148 of title 10, United States Code, for the current fiscal year and hereafter the Secretary of Defense may issue loan guarantees in support of United States defense exports not otherwise provided for: Provided, That the total contingent liability of the United States for guarantees issued under the authority of this section may not exceed $15,000,000,000: Provided further, That the exposure fees charged and collected by the Secretary for each guarantee shall be paid by the country involved and shall not be financed as part of a loan guaranteed by the United States: Provided further, That the Secretary shall provide quarterly reports to the Committees on Appropriations, Armed Services, and Foreign Relations of the Senate and the Committees on Appropriations, Armed Services, and International Relations in the House of Representatives on the implementation of this program: Provided further, That amounts charged for administrative fees and deposited to the special account provided for under section 2540c(d) of title 10, shall be available for paying the costs of administrative expenses of the Department of Defense that are attributable to the loan guarantee program under subchapter VI of chapter 148 of title 10, United States Code.”
Similar provisions were contained in the following prior appropriation acts:
Pub. L. 108–87, title VIII, §8066, Sept. 30, 2003, 117 Stat. 1087.
Pub. L. 107–248, title VIII, §8067, Oct. 23, 2002, 116 Stat. 1551.
Pub. L. 107–117, div. A, title VIII, §8073, Jan. 10, 2002, 115 Stat. 2264.
Pub. L. 106–259, title VIII, §8071, Aug. 9, 2000, 114 Stat. 690.
Pub. L. 106–79, title VIII, §8075, Oct. 25, 1999, 113 Stat. 1246.
Pub. L. 105–262, title VIII, §8075, Oct. 17, 1998, 112 Stat. 2314.
Pub. L. 105–56, title VIII, §8081, Oct. 8, 1997, 111 Stat. 1237.
Pub. L. 104–208, div. A, title I, §101(b) [title VIII, §8093], Sept. 30, 1996, 110 Stat. 3009–71, 3009–107.
Pub. L. 104–61, title VIII, §8075, Dec. 1, 1995, 109 Stat. 665.
Pub. L. 104–106, div. A, title XIII, §1321(b), Feb. 10, 1996, 110 Stat. 477, provided that, not later than two years after Feb. 10, 1996, the President was to submit to Congress a report on the loan guarantee program established pursuant to this section.
A guarantee issued under this subchapter shall be fully and freely transferable.
(Added Pub. L. 104–106, div. A, title XIII, §1321(a)(1), Feb. 10, 1996, 110 Stat. 476.)
(a)
(b)
(c)
(Added Pub. L. 104–106, div. A, title XIII, §1321(a)(1), Feb. 10, 1996, 110 Stat. 476.)
(a)
(b)
(c)
(d)
(2)(A) If for any fiscal year amounts in the special account established under paragraph (1) are not available (or are not anticipated to be available) in a sufficient amount for administrative expenses of the Department of Defense for that fiscal year that are directly attributable to the administration of the program under this subchapter, the Secretary may use amounts currently available for operations and maintenance for Defense-wide activities, not to exceed $500,000 in any fiscal year, for those expenses.
(B) The Secretary shall, from funds in the special account established under paragraph (1), replenish operations and maintenance accounts for amounts expended under subparagraph (A) as soon as the Secretary determines practicable.
(Added Pub. L. 104–106, div. A, title XIII, §1321(a)(1), Feb. 10, 1996, 110 Stat. 476; amended Pub. L. 106–398, §1 [[div. A], title X, §1081(a)], Oct. 30, 2000, 114 Stat. 1654, 1654A–284.)
2000—Subsec. (d). Pub. L. 106–398 designated existing provisions as par. (1) and added par. (2).
Pub. L. 106–398, §1 [[div. A], title X, §1081(b), (c)], Oct. 30, 2000, 114 Stat. 1654, 1654A–284, provided that:
“(b)
“(c)
“(1) A discussion of the effectiveness of the loan guarantee program in furthering the sale of United States defense articles, defense services, and design and construction services to nations that are specified in section 2540(b) of such title, to include a comparison of the loan guarantee program with other United States Government programs that are intended to contribute to the sale of United States defense articles, defense services, and design and construction services and other comparisons the Secretary determines to be appropriate.
“(2) A discussion of the requirements and resources (including personnel and funds) for continued administration of the loan guarantee program by the Defense Department, to include—
“(A) an itemization of the requirements necessary and resources available (or that could be made available) to administer the loan guarantee program for each of the following entities: the Defense Security Cooperation Agency, the Department of Defense International Cooperation Office, and other Defense Department agencies, offices, or activities as the Secretary may specify; and
“(B) for each such activity, agency, or office, a comparison of the use of Defense Department personnel exclusively to administer, manage, and oversee the program with the use of contracted commercial entities to administer and manage the program.
“(3) Any legislative recommendations that the Secretary believes could improve the effectiveness of the program.
“(4) A determination made by the Secretary of Defense indicating which Defense Department agency, office, or other activity should administer, manage, and oversee the loan guarantee program to increase sales of United States defense articles, defense services, and design and construction services, such determination to be made based on the information and analysis provided in the report.”
In this subchapter:
(1) The terms “defense article”, “defense services”, and “design and construction services” have the meanings given those terms in section 47 of the Arms Export Control Act (22 U.S.C. 2794).
(2) The term “cost”, with respect to a loan guarantee, has the meaning given that term in section 502 of the Congressional Budget and Impoundment Control Act of 1974 (2 U.S.C. 661a).
(Added Pub. L. 104–106, div. A, title XIII, §1321(a)(1), Feb. 10, 1996, 110 Stat. 477.)
(a)
(1) The improvement of the protection of the critical infrastructure of the commercial firms.
(2) The refinancing of improvements previously made to the protection of the critical infrastructure of the commercial firms.
(b)
(1) conducts a significant level of its research, development, engineering, and manufacturing activities in the United States;
(2) is a company or other business entity the majority ownership or control of which is by United States citizens or is a company or other business of a parent company that is incorporated in a country the government of which—
(A) encourages the participation of firms so owned or controlled in research and development consortia to which the government of that country provides funding directly or provides funding indirectly through international organizations or agreements; and
(B) affords adequate and effective protection for the intellectual property rights of companies incorporated in the United States;
(3) provides technology products or services critical to the operations of the Department of Defense;
(4) meets standards of prevention of cyberterrorism applicable to the Department of Defense; and
(5) agrees to submit the report required under section 2541d of this title.
(c)
(d)
(e)
(Added Pub. L. 106–398, §1 [[div. A], title X, §1033(a)(1)], Oct. 30, 2000, 114 Stat. 1654, 1654A–258.)
A prior section 2541 was renumbered section 2551 of this title.
Another prior section 2541 was renumbered section 2539b of this title.
(a)
(b)
(c)
(2) Amounts in the special account shall be available, to the extent and in amounts provided in appropriations Acts, for paying the costs of administrative expenses of the Department of Defense that are attributable to the loan guarantee program under this subchapter.
(3)(A) If for any fiscal year amounts in the special account established under paragraph (1) are not available (or are not anticipated to be available) in a sufficient amount for administrative expenses of the Department of Defense for that fiscal year that are directly attributable to the administration of the program under this subchapter, the Secretary may use amounts currently available for operations and maintenance for Defense-wide activities, not to exceed $500,000 in any fiscal year, for those expenses.
(B) The Secretary shall, from funds in the special account established under paragraph (1), replenish operations and maintenance accounts for amounts expended under subparagraph (A).
(Added Pub. L. 106–398, §1 [[div. A], title X, §1033(a)(1)], Oct. 30, 2000, 114 Stat. 1654, 1654A–259.)
(a)
(1) process applications for loan guarantees;
(2) administer repayment of loans; and
(3) provide any other services to the Secretary to administer this subchapter.
(b)
(Added Pub. L. 106–398, §1 [[div. A], title X, §1033(a)(1)], Oct. 30, 2000, 114 Stat. 1654, 1654A–259.)
The following provisions of subchapter VI of this chapter apply to guarantees issued under this subchapter:
(1) Section 2540a, relating to transferability of guarantees.
(2) Subsections (b) and (c) of section 2540b, providing limitations.
(3) Section 2540d(2), providing a definition of the term “cost”.
(Added Pub. L. 106–398, §1 [[div. A], title X, §1033(a)(1)], Oct. 30, 2000, 114 Stat. 1654, 1654A–260; amended Pub. L. 107–107, div. A, title X, §1048(a)(24), Dec. 28, 2001, 115 Stat. 1224.)
2001—Pub. L. 107–107 substituted “subchapter” for “subtitle” in two places in introductory provisions.
The Secretary of Defense shall require each qualified commercial firm for which a loan is guaranteed under this subchapter to submit to the Secretary a report on the improvements financed or refinanced with the loan. The report shall include an assessment of the value of the improvements for the protection of the critical infrastructure of that commercial firm. The Secretary shall prescribe the time for submitting the report.
(Added Pub. L. 106–398, §1 [[div. A], title X, §1033(a)(1)], Oct. 30, 2000, 114 Stat. 1654, 1654A–260; amended Pub. L. 108–136, div. A, title X, §1031(a)(25), Nov. 24, 2003, 117 Stat. 1598.)
Prior sections 2542 to 2550 were renumbered sections 2552 to 2560 of this title, respectively.
2003—Pub. L. 108–136 struck out subsec. (a) designation and heading and struck out subsec. (b) which directed that the Secretary of Defense annually submit to Congress a report on the loan guarantee program under this subchapter.