42 U.S.C.
United States Code, 2014 Edition
Title 42 - THE PUBLIC HEALTH AND WELFARE
CHAPTER 77 - ENERGY CONSERVATION
SUBCHAPTER III - IMPROVING ENERGY EFFICIENCY
Part A-1 - Certain Industrial Equipment
Sec. 6317 - Energy conservation standards for high-intensity discharge lamps, distribution transformers, and small electric motors
From the U.S. Government Publishing Office, www.gpo.gov

§6317. Energy conservation standards for high-intensity discharge lamps, distribution transformers, and small electric motors

(a) High-intensity discharge lamps and distribution transformers

(1) The Secretary shall, within 30 months after October 24, 1992, prescribe testing requirements for those high-intensity discharge lamps and distribution transformers for which the Secretary makes a determination that energy conservation standards would be technologically feasible and economically justified, and would result in significant energy savings.

(2) The Secretary shall, within 18 months after the date on which testing requirements are prescribed by the Secretary pursuant to paragraph (1), prescribe, by rule, energy conservation standards for those high-intensity discharge lamps and distribution transformers for which the Secretary prescribed testing requirements under paragraph (1).

(3) Any standard prescribed under paragraph (2) with respect to high-intensity discharge lamps shall apply to such lamps manufactured 36 months after the date such rule is published.

(b) Small electric motors

(1) The Secretary shall, within 30 months after October 24, 1992, prescribe testing requirements for those small electric motors for which the Secretary makes a determination that energy conservation standards would be technologically feasible and economically justified, and would result in significant energy savings.

(2) The Secretary shall, within 18 months after the date on which testing requirements are prescribed by the Secretary pursuant to paragraph (1), prescribe, by rule, energy conservation standards for those small electric motors for which the Secretary prescribed testing requirements under paragraph (1).

(3) Any standard prescribed under paragraph (2) shall apply to small electric motors manufactured 60 months after the date such rule is published or, in the case of small electric motors which require listing or certification by a nationally recognized testing laboratory, 84 months after such date. Such standards shall not apply to any small electric motor which is a component of a covered product under section 6292(a) of this title or a covered equipment under section 6311 of this title.

(c) Consideration of criteria under other law

In establishing any standard under this section, the Secretary shall take into consideration the criteria contained in section 6295(n) of this title.

(d) Prescription of labeling requirements by Secretary

The Secretary shall, within six months after the date on which energy conservation standards are prescribed by the Secretary for high-intensity discharge lamps and distribution transformers pursuant to subsection (a)(2) of this section and small electric motors pursuant to subsection (b)(2) of this section, prescribe labeling requirements for such lamps, transformers, and small electric motors.

(e) Compliance by manufacturers with labeling requirements

Beginning on the date which occurs six months after the date on which a labeling rule is prescribed for a product under subsection (d) of this section, each manufacturer of a product to which such a rule applies shall provide a label which meets, and is displayed in accordance with, the requirements of such rule.

(f) New covered products; distribution of non-conforming products prohibited; construction with other law

(1) After the date on which a manufacturer must provide a label for a product pursuant to subsection (e) of this section—

(A) each such product shall be considered, for purposes of paragraphs (1) and (2) of section 6302(a) of this title, a new covered product to which a rule under section 6294 of this title applies; and

(B) it shall be unlawful for any manufacturer or private labeler to distribute in commerce any new product for which an energy conservation standard is prescribed under subsection (a)(2) or (b)(2) of this section which is not in conformity with the applicable energy conservation standard.


(2) For purposes of section 6303(a) of this title, paragraph (1) of this subsection shall be considered to be a part of section 6302 of this title.

(Pub. L. 94–163, title III, §346, as added Pub. L. 95–619, title IV, §441(a), Nov. 9, 1978, 92 Stat. 3272; amended Pub. L. 102–486, title I, §124(a), Oct. 24, 1992, 106 Stat. 2832.)

Amendments

1992—Pub. L. 102–486 amended section generally, substituting provisions requiring energy conservation standards for high-intensity discharge lamps, distribution transformers, and small electric motors, for provisions authorizing appropriations for fiscal years 1978 and 1979.

Study of Utility Distribution Transformers; Report to Congress

Pub. L. 102–486, title I, §124(c), Oct. 24, 1992, 106 Stat. 2833, provided that: "The Secretary shall evaluate the practicability, cost-effectiveness, and potential energy savings of replacing, or upgrading components of, existing utility distribution transformers during routine maintenance and, not later than 18 months after the date of the enactment of this Act [Oct. 24, 1992], report the findings of such evaluation to the Congress with recommendations on how such energy savings, if any, could be achieved."